# Copyright (C) 2012-2023 Internet Systems Consortium, Inc. ("ISC")
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.

$NAMESPACE isc::netconf

% NETCONF_BOOT_UPDATE_COMPLETED Boot-update configuration completed for server %1
This informational message is issued when the initial configuration
was retrieved using NETCONF and successfully applied to Kea server.

% NETCONF_CONFIG_CHANGED_DETAIL YANG configuration changed: %1
This debug message indicates a YANG configuration change. The format
is the change operation (created, modified, deleted or moved) followed
by xpaths and values of old and new nodes.

% NETCONF_CONFIG_CHANGE_EVENT Received YANG configuration change %1 event
This informational message is issued when kea-netconf receives a YANG
configuration change event. The type of event is printed.

% NETCONF_CONFIG_CHECK_FAIL NETCONF configuration check failed: %1
This error message indicates that kea-netconf had failed configuration
check. Details are provided. Additional details may be available
in earlier log entries, possibly on lower levels.

% NETCONF_CONFIG_FAIL NETCONF configuration failed: %1
This error message indicates that kea-netconf had failed configuration
attempt. Details are provided. Additional details may be available
in earlier log entries, possibly on lower levels.

% NETCONF_CONFIG_SYNTAX_WARNING NETCONF configuration syntax warning: %1
This warning message indicates that the NETCONF configuration had a minor
syntax error. The error was displayed and the configuration parsing resumed.

% NETCONF_FAILED application experienced a fatal error: %1
This is a fatal error message issued when kea-netconf
got an unrecoverable error from within the event loop.

% NETCONF_GET_CONFIG got configuration from %1 server: %2
This debug message indicates that kea-netconf got the configuration from a
Kea server. The server name and the retrieved configuration are printed.

% NETCONF_GET_CONFIG_FAILED getting configuration from %1 server failed: %2
The error message indicates that kea-netconf got an error getting the
configuration from a Kea server. Make sure that the server is up and
running, has appropriate control socket defined and that the controls
socket configuration on the server matches that of kea-netconf. The
name of the server and the error are printed.

% NETCONF_GET_CONFIG_STARTED getting configuration from %1 server
This informational message indicates that kea-netconf is trying to get the
configuration from a Kea server.

% NETCONF_LOG_CHANGE_FAIL NETCONF configuration change logging failed: %1
The warning message indicates that the configuration change logging
encountered an unexpected condition. Details of it will be logged.

% NETCONF_MODULE_MISSING_ERR Missing essential module %1 in sysrepo
This fatal error message indicates that a module required by Netconf
configuration is not available in the sysrepo repository.  The name of
the module is printed.

% NETCONF_MODULE_MISSING_WARN Missing module %1 in sysrepo
This warning message indicates that a module used by Kea is not
available in the sysrepo repository. The name of the module is printed.

% NETCONF_MODULE_REVISION_ERR Essential module %1 does NOT have the right revision: expected %2, got %3
This fatal error message indicates that a module required by Netconf
configuration is not at the right revision in the sysrepo repository.
The name, expected and available revisions of the module are printed.

% NETCONF_MODULE_REVISION_WARN Module %1 does NOT have the right revision: expected %2, got %3
This warning message indicates that a module used by Kea is not at the
right revision in the sysrepo repository. The name, expected and
available revisions of the module are printed.

% NETCONF_NOTIFICATION_RECEIVED Received notification of type %1 for module %1: %2
This informational message logs any YANG notification that has been signaled
by the server, sent to kea-netconf which then was forwarded to subscribed
clients. To achieve this, kea-netconf subscribes itself as a client to all
notifications for the configured module.

% NETCONF_NOT_SUBSCRIBED_TO_NOTIFICATIONS subscribing to notifications for %1 server with %2 module failed: %3
The warning message indicates that kea-netconf got an error subscribing to
notifications for a Kea server. The most probable cause is probably that the
model that kea-netconf subscribed to does not have any notification nodes, but
there may be other more unexpected causes as well.
The server name, module name and the error are printed.

% NETCONF_RUN_EXIT application is exiting the event loop
This is a debug message issued when kea-netconf exits its
event loop. This is a normal step during kea-netconf shutdown.

% NETCONF_SET_CONFIG set configuration to %1 server: %2
This debug message indicates that kea-netconf set the configuration to a
Kea server. The server name and the applied configuration are printed.

% NETCONF_SET_CONFIG_FAILED setting configuration to %1 server failed: %2
The error message indicates that kea-netconf got an error setting the
configuration to a Kea server. Make sure that the server is up and
running, has appropriate control socket defined and that the controls
socket configuration on the server matches that of kea-netconf. The
name of the server and the error are printed.

% NETCONF_SET_CONFIG_STARTED setting configuration to %1 server
This informational message indicates that kea-netconf is trying to set the
configuration to a Kea server.

% NETCONF_STARTED kea-netconf (version %1) started
This informational message indicates that kea-netconf has processed
all configuration information and is ready to begin processing.
The version is also printed.

% NETCONF_SUBSCRIBE_CONFIG subscribing configuration changes for %1 server with %2 module
This information message indicates that kea-netconf is trying to subscribe
configuration changes for a Kea server. The names of the server and
the module are printed.

% NETCONF_SUBSCRIBE_CONFIG_FAILED subscribe configuration changes for %1 server with %2 module failed: %3
The error message indicates that kea-netconf got an error subscribing
configuration changes for a Kea server. The names of the server and
the module, and the error are printed.

% NETCONF_SUBSCRIBE_NOTIFICATIONS subscribing to notifications for %1 server with %2 module
This information message indicates that kea-netconf is trying to subscribe to
notifications for a Kea server. The server name and module name are printed.

% NETCONF_UPDATE_CONFIG updating configuration with %1 server: %2
This debug message indicates that kea-netconf update the configuration
of a Kea server. The server name and the updated configuration are
printed.

% NETCONF_UPDATE_CONFIG_COMPLETED completed updating configuration for %1 server
This informational message indicates that kea-netconf updated with success the
configuration of a Kea server.

% NETCONF_UPDATE_CONFIG_FAILED updating configuration with %1 server: %2
The error message indicates that kea-netconf got an error updating the
configuration of a Kea server. This includes a configuration rejected
by a Kea server when it tried to apply it. The name of the server and
the error are printed.

% NETCONF_UPDATE_CONFIG_STARTED started updating configuration for %1 server
This informational message indicates that kea-netconf is trying to update the
configuration of a Kea server.

% NETCONF_VALIDATE_CONFIG validating configuration with %1 server: %2
This debug message indicates that kea-netconf is validating the configuration
with a Kea server. The server name and the validated configuration are
printed.

% NETCONF_VALIDATE_CONFIG_COMPLETED completed validating configuration for %1 server
This informational message indicates that kea-netconf validated with success the
configuration with a Kea server.

% NETCONF_VALIDATE_CONFIG_FAILED validating configuration with %1 server got an error: %2
The error message indicates that kea-netconf got an error validating the
configuration with a Kea server. This message is produced when
exception is thrown during an attempt to validate received
configuration. Additional explanation may be provided as a
parameter. You may also take a look at earlier log messages.  The name
of the server and the error are printed.

% NETCONF_VALIDATE_CONFIG_REJECTED validating configuration with %1 server was rejected: %2
The warning message indicates that kea-netconf got an error validating the
configuration with a Kea server. This message is printed when the
configuration was rejected during normal processing. Additional
explanation may be provided as a parameter. You may also take a look
at earlier log messages.  The name of the server and the error are
printed.

% NETCONF_VALIDATE_CONFIG_STARTED started validating configuration for %1 server
This informational message indicates that kea-netconf is trying to validate the
configuration with a Kea server.