# Copyright (C) 2015-2022 Internet Systems Consortium, Inc. ("ISC") # # This Source Code Form is subject to the terms of the Mozilla Public # License, v. 2.0. If a copy of the MPL was not distributed with this # file, You can obtain one at http://mozilla.org/MPL/2.0/. $NAMESPACE isc::dhcp # For use with TokenAnd % EVAL_DEBUG_AND Popping %1 and %2 pushing %3 This debug message indicates that two values are popped from the value stack. Then are then combined via logical and and the result is pushed onto the value stack. # For use with TokenConcat % EVAL_DEBUG_CONCAT Popping %1 and %2 pushing %3 This debug message indicates that the two strings are being popped off of the stack. They are then concatenated and the resulting string is pushed onto the stack. The strings are displayed in hex. # For use with TokenEqual # Start with binary for the inputs for now, we may add text in the future. % EVAL_DEBUG_EQUAL Popping %1 and %2 pushing result %3 This debug message indicates that the two strings are being popped off of the value stack and the result of comparing them is being pushed onto the value stack. The strings are displayed in hex. # For use with TokenHexString % EVAL_DEBUG_HEXSTRING Pushing hex string %1 This debug message indicates that the given binary string is being pushed onto the value stack. The string is displayed in hex. # For use with TokenIfElse % EVAL_DEBUG_IFELSE_FALSE Popping %1 (false) and %2, leaving %3 This debug message indicates that the condition is false so the iftrue branch value is removed and the ifelse branch value is left on the value stack. % EVAL_DEBUG_IFELSE_TRUE Popping %1 (true) and %2, leaving %3 This debug message indicates that the condition is true so the ifelse branch value is removed and the iftrue branch value is left on the value stack. # For use with TokenIpAddress % EVAL_DEBUG_INT16TOTEXT Pushing Int16 %1 This debug message indicates that the given address string representation is being pushed onto the value stack. This represents a 16 bit integer. # For use with TokenInt32ToText % EVAL_DEBUG_INT32TOTEXT Pushing Int32 %1 This debug message indicates that the given address string representation is being pushed onto the value stack. This represents a 32 bit integer. # For use with TokenUInt8ToText % EVAL_DEBUG_INT8TOTEXT Pushing Int8 %1 This debug message indicates that the given address string representation is being pushed onto the value stack. This represents an 8 bit integer. # For use with TokenInt16ToText % EVAL_DEBUG_IPADDRESS Pushing IPAddress %1 This debug message indicates that the given binary string is being pushed onto the value stack. This represents either an IPv4 or IPv6 address. The string is displayed in hex. # For use with TokenIpAddressToText % EVAL_DEBUG_IPADDRESSTOTEXT Pushing IPAddress %1 This debug message indicates that the given address string representation is being pushed onto the value stack. This represents either an IPv4 or IPv6 address. # For use with TokenInt8ToText % EVAL_DEBUG_MEMBER Checking membership of '%1', pushing result %2 This debug message indicates that the membership of the packet for the client class was checked. # For use with TokenNot % EVAL_DEBUG_NOT Popping %1 pushing %2 This debug message indicates that the first value is popped from the value stack, negated and then pushed onto the value stack. The string is displayed in text. # For use with TokenOption based classes. These include TokenOption, # TokenRelay4Option and TokenRelay6Option. % EVAL_DEBUG_OPTION Pushing option %1 with value %2 This debug message indicates that the given string representing the value of the requested option is being pushed onto the value stack. The string may be the text or binary value of the string based on the representation type requested (.text or .hex) or "true" or "false" if the requested type is .exists. The option code may be for either an option or a sub-option as requested in the classification statement. # For use with TokenOr % EVAL_DEBUG_OR Popping %1 and %2 pushing %3 This debug message indicates that two values are popped from the value stack. Then are then combined via logical or and the result is pushed onto the value stack. The string is displayed in text. # For use with TokenPkt % EVAL_DEBUG_PKT Pushing PKT meta data %1 with value %2 This debug message indicates that the given binary string representing the value of the requested meta data is being pushed onto the value stack. The string is displayed in hex at the exception of interface name. # For use with TokenPkt4 % EVAL_DEBUG_PKT4 Pushing PKT4 field %1 with value %2 This debug message indicates that the given binary string representing the value of the requested field is being pushed onto the value stack. The string is displayed in hex. # For use with TokenPkt6 % EVAL_DEBUG_PKT6 Pushing PKT6 field %1 with value %2 This debug message indicates that the given binary string representing the value of the requested field is being pushed onto the value stack. The string is displayed in hex. # For use with TokenRelay6Field % EVAL_DEBUG_RELAY6 Pushing PKT6 relay field %1 nest %2 with value %3 This debug message indicates that the given binary string representing the value of the requested field is being pushed onto the value stack. The string is displayed in hex. % EVAL_DEBUG_RELAY6_RANGE Pushing PKT6 relay field %1 nest %2 with value %3 This debug message is generated if the nest field is out of range. The empty string will always be the value pushed onto the stack. # For use with TokenString % EVAL_DEBUG_SPLIT Popping field %1, delimiters %2, string %3, pushing result %4 This debug message indicates that three values are being popped from the stack and a result is being pushed onto the stack. The values being popped are the field, delimiter and string. The result is the extracted field which is pushed onto the stack. The strings are displayed in hex. % EVAL_DEBUG_SPLIT_DELIM_EMPTY Popping field %1, delimiters %2, string %3, pushing result %4 This debug message indicates that the delimiter popped from the stack was empty and so the result will be the entire string. The field, delimiter and string are still popped from the stack and the result is still pushed. % EVAL_DEBUG_SPLIT_EMPTY Popping field %1, delimiters %2, string %3, pushing result %4 This debug message indicates that the string popped from the stack was empty and so the result will also be empty. The field, delimiter and string are still popped from the stack and the result is still pushed. % EVAL_DEBUG_SPLIT_FIELD_OUT_OF_RANGE Popping field %1, delimiters %2, string %3, pushing result %4 This debug message indicates that the field is either less than one or larger than the number of fields in the string popped from the stack. The result will be empty. The field, delimiter and string are still popped from the stack and the result is still pushed. % EVAL_DEBUG_STRING Pushing text string %1 This debug message indicates that the given text string is being pushed onto the value stack. The string is displayed in text. # For use with TokenSubstring # Start with binary for the strings for now, we may add text in the future. % EVAL_DEBUG_SUBSTRING Popping length %1, start %2, string %3 pushing result %4 This debug message indicates that three values are being popped from the value stack and a result is being pushed onto the value stack. The values being popped are the starting point and length of a substring to extract from the given string. The resulting string is pushed onto the stack. The strings are displayed in hex. % EVAL_DEBUG_SUBSTRING_EMPTY Popping length %1, start %2, string %3 pushing result %4 This debug message indicates that the string popped from the stack was empty and so the result will also be empty. The start, length and string are still popped from the stack and the result is still pushed. % EVAL_DEBUG_SUBSTRING_RANGE Popping length %1, start %2, string %3 pushing result %4 This debug message indicates that the value of start is outside of the string and an empty result will be pushed onto the stack. The start, length and string are still popped from the stack and the result is still pushed. The strings are displayed in hex. # For use with TokenSubOption % EVAL_DEBUG_SUB_OPTION Pushing option %1 sub-option %2 with value %3 This debug message indicates that the given string representing the value of the requested sub-option of the requested parent option is being pushed onto the value stack. The string may be the text or binary value of the string based on the representation type requested (.text or .hex) or "true" or "false" if the requested type is .exists. The codes are the parent option and the sub-option codes as requested in the classification statement. % EVAL_DEBUG_SUB_OPTION_NO_OPTION Requested option %1 sub-option %2, but the parent option is not present, pushing result %3 This debug message indicates that the parent option was not found. The codes are the parent option and the sub-option codes as requested in the classification statement. # For use with TokenToHexString % EVAL_DEBUG_TOHEXSTRING Popping binary value %1 and separator %2, pushing result %3 This debug message indicates that two values are being popped from the value stack and a result is being pushed onto the value stack. The values being popped are the binary value to convert and the separator. The binary value is converted to its hexadecimal string representation and pushed onto the stack. The binary value is displayed in hex. % EVAL_DEBUG_UINT16TOTEXT Pushing UInt16 %1 This debug message indicates that the given address string representation is being pushed onto the value stack. This represents a 16 bit unsigned integer. # For use with TokenUInt32ToText % EVAL_DEBUG_UINT32TOTEXT Pushing UInt32 %1 This debug message indicates that the given address string representation is being pushed onto the value stack. This represents a 32 bit unsigned integer. # For use with TokenMember % EVAL_DEBUG_UINT8TOTEXT Pushing UInt8 %1 This debug message indicates that the given address string representation is being pushed onto the value stack. This represents an 8 bit unsigned integer. # For use with TokenUInt16ToText % EVAL_DEBUG_VENDOR_CLASS_DATA Data %1 (out of %2 received) in vendor class found, pushing result '%3' This debug message indicates that vendor class option was found and passed enterprise-id checks and has sufficient number of data chunks. The total number of chunks and value pushed are reported as debugging aid. % EVAL_DEBUG_VENDOR_CLASS_DATA_NOT_FOUND Requested data index %1, but option with enterprise-id %2 has only %3 data tuple(s), pushing result '%4' This debug message indicates that vendor class option was found and passed enterprise-id checks, but does not have sufficient number of data chunks. Note that the index starts at 0, so there has to be at least (index + 1) data chunks. % EVAL_DEBUG_VENDOR_CLASS_ENTERPRISE_ID Pushing enterprise-id %1 as result 0x%2 This debug message indicates that the expression has been evaluated and vendor class option was found and its enterprise-id is being reported. % EVAL_DEBUG_VENDOR_CLASS_ENTERPRISE_ID_MISMATCH Was looking for %1, option had %2, pushing result '%3' This debug message indicates that the expression has been evaluated and vendor class option was found, but has different enterprise-id than specified in the expression. % EVAL_DEBUG_VENDOR_CLASS_EXISTS Option with enterprise-id %1 found, pushing result '%2' This debug message indicates that the expression has been evaluated and vendor class option was found. % EVAL_DEBUG_VENDOR_CLASS_NO_OPTION Option with code %1 missing, pushing result '%2' This debug message indicates that the expression has been evaluated and vendor class option was not found. % EVAL_DEBUG_VENDOR_ENTERPRISE_ID Pushing enterprise-id %1 as result 0x%2 This debug message indicates that the expression has been evaluated and vendor option was found and its enterprise-id is being reported. % EVAL_DEBUG_VENDOR_ENTERPRISE_ID_MISMATCH Was looking for %1, option had %2, pushing result '%3' This debug message indicates that the expression has been evaluated and vendor option was found, but has different enterprise-id than specified in the expression. % EVAL_DEBUG_VENDOR_EXISTS Option with enterprise-id %1 found, pushing result '%2' This debug message indicates that the expression has been evaluated and vendor option was found. % EVAL_DEBUG_VENDOR_NO_OPTION Option with code %1 missing, pushing result '%2' This debug message indicates that the expression has been evaluated and vendor option was not found. % EVAL_RESULT Expression %1 evaluated to %2 This debug message indicates that the expression has been evaluated to said value. This message is mostly useful during debugging of the client classification expressions.