diff options
Diffstat (limited to 'kBuild/tools/GXX3.kmk')
| -rw-r--r-- | kBuild/tools/GXX3.kmk | 386 |
1 files changed, 386 insertions, 0 deletions
diff --git a/kBuild/tools/GXX3.kmk b/kBuild/tools/GXX3.kmk new file mode 100644 index 0000000..b2fbed7 --- /dev/null +++ b/kBuild/tools/GXX3.kmk @@ -0,0 +1,386 @@ +# $Id: GXX3.kmk 3567 2022-06-26 20:00:02Z bird $ +## @file +# kBuild Tool Config - Generic GCC v3.2+ using the system GCC and Binutils, for building C++ code. +# + +# +# Copyright (c) 2004-2017 knut st. osmundsen <bird-kBuild-spam-xviiv@anduin.net> +# +# This file is part of kBuild. +# +# kBuild is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# kBuild is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with kBuild; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# +# As a special exception you are granted permission to include this file, via +# the kmk include directive, as you wish without this in itself causing the +# resulting makefile, program or whatever to be covered by the GPL license. +# This exception does not however invalidate any other reasons why the makefile, +# program, whatever should not be covered the GPL. +# +# + +TOOL_GXX3 := Generic GCC v3.2.x or later using the system GCC and Binutils, for building C++ code. + +# Tool Specific Properties +ifndef TOOL_GXX3_PREFIX + TOOL_GXX3_PREFIX := +endif +ifndef TOOL_GXX3_SUFFIX + TOOL_GXX3_SUFFIX := $(HOSTSUFF_EXE) +endif +if1of ($(KBUILD_HOST), solaris) + TOOL_GXX3_PREFIX2 ?= g +else + TOOL_GXX3_PREFIX2 ?= +endif +TOOL_GXX3_SUFFIX2 ?= $(HOSTSUFF_EXE) +TOOL_GXX3_PREFIX3 ?= +TOOL_GXX3_SUFFIX3 ?= $(HOSTSUFF_EXE) + +TOOL_GXX3_CC ?= $(TOOL_GXX3_PREFIX)gcc$(TOOL_GXX3_SUFFIX) +TOOL_GXX3_CXX ?= $(TOOL_GXX3_PREFIX)g++$(TOOL_GXX3_SUFFIX) +TOOL_GXX3_PCH ?= $(TOOL_GXX3_CXX) +TOOL_GXX3_AS ?= $(TOOL_GXX3_PREFIX)gcc$(TOOL_GXX3_SUFFIX) +TOOL_GXX3_AR ?= $(TOOL_GXX3_PREFIX2)ar$(TOOL_GXX3_SUFFIX2) +ifeq ($(KBUILD_TARGET),os2) + TOOL_GXX3_AR_IMP ?= $(TOOL_GXX3_PREFIX3)emximp$(TOOL_GXX3_SUFFIX3) +else + TOOL_GXX3_AR_IMP ?= $(ECHO) not supported! +endif +TOOL_GXX3_LD ?= $(TOOL_GXX3_PREFIX)g++$(TOOL_GXX3_SUFFIX) +if1of ($(KBUILD_HOST), solaris) + TOOL_GXX3_LD_SYSMOD ?= $(TOOL_GXX3_PREFIX3)ld$(TOOL_GXX3_SUFFIX3) +else + TOOL_GXX3_LD_SYSMOD ?= $(TOOL_GXX3_PREFIX2)ld$(TOOL_GXX3_SUFFIX2) +endif +ifndef TOOL_GXX3_LDFLAGS.$(KBUILD_TARGET) + TOOL_GXX3_LDFLAGS.dll ?= -shared +else + TOOL_GXX3_LDFLAGS.dll ?= $(TOOL_GXX3_LDFLAGS.$(KBUILD_TARGET)) +endif +TOOL_GXX3_LDFLAGS.sysmod ?= -r +TOOL_GXX3_LD_SONAME ?= -Wl,-soname=$(firstword $($(1)_SONAME.$(KBUILD_TARGET).$(KBUILD_TYPE)) $($(1)_SONAME.$(KBUILD_TARGET)) $($(1)_SONAME.$(KBUILD_TYPE)) $($(1)_SONAME) $(notdir $(2))) +ifeq ($(KBUILD_TARGET),os2) + TOOL_GXX3_LD_MAP ?= -Zmap=$(1) + TOOL_GXX3_LD_SYSMOD_MAP ?= -Zmap=$(1) +else + TOOL_GXX3_LD_MAP ?= + TOOL_GXX3_LD_SYSMOD_MAP ?= +endif +TOOL_GXX3_OBJCOPY ?= $(TOOL_GXX3_PREFIX)objcopy$(TOOL_GXX3_SUFFIX) + +# General Properties used by kBuild +TOOL_GXX3_COBJSUFF ?= .o +TOOL_GXX3_CFLAGS ?= +TOOL_GXX3_CFLAGS.debug ?= -g +TOOL_GXX3_CFLAGS.profile ?= -O2 #-g -pg +TOOL_GXX3_CFLAGS.release ?= -O2 +TOOL_GXX3_CINCS ?= +TOOL_GXX3_CDEFS ?= + +TOOL_GXX3_CXXOBJSUFF ?= .o +TOOL_GXX3_CXXFLAGS ?= +TOOL_GXX3_CXXFLAGS.debug ?= -g +TOOL_GXX3_CXXFLAGS.profile ?= -O2 #-g -pg +TOOL_GXX3_CXXFLAGS.release ?= -O2 +TOOL_GXX3_CXXINCS ?= +TOOL_GXX3_CXXDEFS ?= + +TOOL_GXX3_PCHOBJSUFF ?= .h.gch +TOOL_GXX3_PCHFLAGS ?= $(TOOL_GXX3_CXXFLAGS) +TOOL_GXX3_PCHFLAGS.debug ?= $(TOOL_GXX3_CXXFLAGS.debug) +TOOL_GXX3_PCHFLAGS.profile ?= $(TOOL_GXX3_CXXFLAGS.profile) +TOOL_GXX3_PCHFLAGS.release ?= $(TOOL_GXX3_CXXFLAGS.release) +TOOL_GXX3_PCHINCS ?= $(TOOL_GXX3_CXXINCS) +TOOL_GXX3_PCHDEFS ?= $(TOOL_GXX3_CXXDEFS) + +TOOL_GXX3_ASFLAGS ?= -x assembler-with-cpp +TOOL_GXX3_ASFLAGS.debug ?= -g +TOOL_GXX3_ASFLAGS.profile ?= -g +TOOL_GXX3_ASOBJSUFF ?= .o + +TOOL_GXX3_ARFLAGS ?= cr +TOOL_GXX3_ARLIBSUFF ?= .a + +TOOL_GXX3_LDFLAGS ?= +TOOL_GXX3_LDFLAGS.debug ?= -g +TOOL_GXX3_LDFLAGS.profile ?= -g + + +## Compile C source. +# @param $(target) Normalized main target name. +# @param $(source) Source filename (relative). +# @param $(obj) Object file name. This shall be (re)created by the compilation. +# @param $(dep) Dependcy file. This shall be (re)created by the compilation. +# @param $(flags) Flags. +# @param $(defs) Definitions. No -D or something. +# @param $(incs) Includes. No -I or something. +# @param $(dirdep) Directory creation dependency. +# @param $(deps) Other dependencies. +# +# @param $(outbase) Output basename (full). Use this for list files and such. +# @param $(objsuff) Object suffix. +TOOL_GXX3_COMPILE_C_DEPEND = +TOOL_GXX3_COMPILE_C_DEPORD = +TOOL_GXX3_COMPILE_C_OUTPUT = $(if-expr "$(use_objcache)" != "",$(outbase).i,) +TOOL_GXX3_COMPILE_C_USES_KOBJCACHE = $(if-expr "$(use_objcache)" != "",1,) +define TOOL_GXX3_COMPILE_C_CMDS +if "$(use_objcache)" != "" + $(QUIET)$(KOBJCACHE) -f $(outbase).koc -d $(PATH_OBJCACHE) -t $(bld_trg).$(bld_trg_arch) -p\ + --kObjCache-cpp $(outbase).i\ + $(TOOL_GXX3_CC) -E -o -\ + $(flags) $(qaddprefix sh,-I, $(incs)) $(qaddprefix sh,-D, $(defs))\ + -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\ + $(abspath $(source))\ + --kObjCache-cc $(obj)\ + $(TOOL_GXX3_CC) -c\ + $(flags) -fpreprocessed -x c\ + -o $(obj)\ + - +else + $(QUIET)$(TOOL_GXX3_CC) -c\ + $(flags) $(qaddprefix sh,-I, $(incs)) $(qaddprefix sh,-D, $(defs))\ + -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\ + -o $(obj)\ + $(abspath $(source)) +endif + $(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" "" +endef + + +## Compile C++ source. +# @param $(target) Normalized main target name. +# @param $(source) Source filename (relative). +# @param $(obj) Object file name. This shall be (re)created by the compilation. +# @param $(dep) Dependcy file. This shall be (re)created by the compilation. +# @param $(flags) Flags. +# @param $(defs) Definitions. No -D or something. +# @param $(incs) Includes. No -I or something. +# @param $(dirdep) Directory creation dependency. +# @param $(deps) Other dependencies. +# @param $(outbase) Output basename (full). Use this for list files and such. +# @param $(objsuff) Object suffix. +TOOL_GXX3_COMPILE_CXX_OUTPUT = $(if-expr "$(use_objcache)" != "",$(outbase).ii,) +TOOL_GXX3_COMPILE_CXX_DEPEND = $($(target)_1_GCC_PCH_FILE) +TOOL_GXX3_COMPILE_CXX_DEPORD = +TOOL_GXX3_COMPILE_CXX_USES_KOBJCACHE = $(if-expr "$(use_objcache)" != "",1,) +define TOOL_GXX3_COMPILE_CXX_CMDS +if "$(use_objcache)" != "" + $(QUIET)$(KOBJCACHE) -f $(outbase).koc -d $(PATH_OBJCACHE) -t $(bld_trg).$(bld_trg_arch) -p\ + --kObjCache-cpp $(outbase).ii\ + $(TOOL_GXX3_CXX) -E -o - $(if-expr defined($(target)_PCH_HDR)\ + ,-fpch-preprocess -Winvalid-pch -I$($(target)_1_GCC_PCH_DIR) -include $(basename $($(target)_1_GCC_PCH_FILE)),)\ + $(flags) $(qaddprefix sh,-I, $(incs)) $(qaddprefix sh,-D, $(defs))\ + -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\ + $(abspath $(source))\ + --kObjCache-cc $(obj)\ + $(TOOL_GXX3_CXX) -c\ + $(flags) -fpreprocessed $(if-expr defined($(target)_PCH_HDR),-fpch-preprocess,) -x c++\ + -o $(obj)\ + - +else + $(QUIET)$(TOOL_GXX3_CXX) -c\ + $(flags) $(qaddprefix sh,-I, $($(target)_1_GCC_PCH_DIR) $(incs)) $(qaddprefix sh,-D, $(defs))\ + -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\ + -o $(obj) $(if-expr defined($(target)_PCH_HDR) \ + ,-Winvalid-pch -include $(basename $($(target)_1_GCC_PCH_FILE)),) \ + $(abspath $(source)) +endif + $(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" "" +endef + + +## Precompile C++ header. +# @param $(target) Normalized main target name. +# @param $(source) Source filename (relative). +# @param $(obj) Object file name. This shall be (re)created by the compilation. +# @param $(dep) Dependcy file. This shall be (re)created by the compilation. +# @param $(flags) Flags. +# @param $(defs) Definitions. No -D or something. +# @param $(incs) Includes. No -I or something. +# @param $(dirdep) Directory creation dependency. +# @param $(deps) Other dependencies. +# @param $(outbase) Output basename (full). Use this for list files and such. +# @param $(objsuff) Object suffix. +TOOL_GXX3_COMPILE_PCH_OUTPUT = $($(target)_1_GCC_PCH_FILE) +TOOL_GXX3_COMPILE_PCH_DEPEND = +TOOL_GXX3_COMPILE_PCH_DEPORD = $($(target)_1_GCC_PCH_DIR) +define TOOL_GXX3_COMPILE_PCH_CMDS + $(QUIET)$(TOOL_GXX3_PCH) -c\ + $(flags) $(qaddprefix sh,-I, $($(target)_1_GCC_PCH_DIR) $(incs)) $(qaddprefix sh,-D, $(defs))\ + -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\ + -o $(obj)\ + $(abspath $(source)) + $(INSTALL) --hard-link-files-when-possible -m 0644 -- "$(obj)" "$($(target)_1_GCC_PCH_FILE)" + $(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" "" +endef + + +## Compile Assembly source. +# @param $(target) Normalized main target name. +# @param $(source) Source filename (relative). +# @param $(obj) Object file name. This shall be (re)created by the compilation. +# @param $(dep) Dependcy file. This shall be (re)created by the compilation. +# @param $(flags) Flags. +# @param $(defs) Definitions. No -D or something. +# @param $(incs) Includes. No -I or something. +# @param $(dirdep) Directory creation dependency. +# @param $(deps) Other dependencies. +# @param $(outbase) Output basename (full). Use this for list files and such. +# @param $(objsuff) Object suffix. +# +TOOL_GXX3_COMPILE_AS_OUTPUT = +TOOL_GXX3_COMPILE_AS_DEPEND = +TOOL_GXX3_COMPILE_AS_DEPORD = +define TOOL_GXX3_COMPILE_AS_CMDS + $(QUIET)$(TOOL_GXX3_AS) -c\ + $(flags) $(qaddprefix sh,-I, $(incs)) $(qaddprefix sh,-D, $(defs))\ + -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\ + -o $(obj)\ + $(abspath $(source)) + $(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" "" +endef + + +## Link library +# @param $(target) Normalized main target name. +# @param $(out) Library name. +# @param $(objs) Object files to put in the library. +# @param $(flags) Flags. +# @param $(dirdep) Directory creation dependency. +# @param $(deps) Other dependencies. +# @param $(othersrc) Unhandled sources. +# @param $(outbase) Output basename (full). Use this for list files and such. +TOOL_GXX3_LINK_LIBRARY_OUTPUT = $(out).ar-script +TOOL_GXX3_LINK_LIBRARY_OUTPUT_MAYBE = $(outbase).imp.a +TOOL_GXX3_LINK_LIBRARY_DEPEND = $(othersrc) +TOOL_GXX3_LINK_LIBRARY_DEPORD = +define TOOL_GXX3_LINK_LIBRARY_CMDS + $(QUIET)$(APPEND) $(out).ar-script 'CREATE $(out)' + $(QUIET)$(APPEND) -n $(out).ar-script \ + $(foreach o,$(filter-out %.h.gch,$(objs)), 'ADDMOD $(o)') \ + $(foreach o,$(filter-out %.def %.imp %.dll,$(othersrc)), 'ADDLIB $(o)') + $(if $(filter %.def %.imp %.dll,$(othersrc))\ + ,$(TOOL_GXX3_AR_IMP) -o $(outbase).imp.a $(filter %.def %.imp %.dll,$(othersrc))\ + $(NL)$(TAB)$(QUIET)$(APPEND) $(out).ar-script 'ADDLIB $(outbase).imp.a') + $(QUIET)$(APPEND) $(out).ar-script 'SAVE' + $(QUIET)$(APPEND) $(out).ar-script 'END' + $(QUIET)$(REDIRECT) -rti $(out).ar-script -- $(TOOL_GXX3_AR) -M +endef + + +## Link program +# @param $(target) Normalized main target name. +# @param $(out) Program name. +# @param $(objs) Object files to link together. +# @param $(libs) Libraries to search. +# @param $(libpath) Library search paths. +# @param $(flags) Flags. +# @param $(dirdep) Directory creation dependency. +# @param $(deps) Other dependencies. +# @param $(othersrc) Unhandled sources. +# @param $(custom_pre) Custom step invoked before linking. +# @param $(custom_post) Custom step invoked after linking. +# @param $(outbase) Output basename (full). Use this for list files and such. +TOOL_GXX3_LINK_PROGRAM_OUTPUT = +TOOL_GXX3_LINK_PROGRAM_OUTPUT_MAYBE = $(outbase).map +TOOL_GXX3_LINK_PROGRAM_OUTPUT_DEBUG = $(outbase).debug +TOOL_GXX3_LINK_PROGRAM_DEBUG_INSTALL_FN = $(2).debug=>$(basename $(3)).debug +TOOL_GXX3_LINK_PROGRAM_DEPEND = $(foreach lib,$(libs),$(if $(findstring $(lib),$(subst /,x,$(lib))),, $(lib)))\ + $(filter %.def, $(othersrc)) +TOOL_GXX3_LINK_PROGRAM_DEPORD = +define TOOL_GXX3_LINK_PROGRAM_CMDS + $(QUIET)$(TOOL_GXX3_LD) $(flags) -o $(out) $(filter-out %.h.gch,$(objs))\ + $(filter %.def, $(othersrc))\ + $(foreach p,$(libpath), -L$(p))\ + $(foreach lib,$(libs), $(if $(findstring $(lib),$(subst /,x,$(lib))), -l$(patsubst lib%,%,$(lib)), $(lib)))\ + $(call TOOL_GXX3_LD_MAP,$(outbase).map) + ifeq ($(ld_debug),split) + $(QUIET)$(TOOL_GXX3_OBJCOPY) --only-keep-debug $(out) $(outbase).debug + $(QUIET)$(CHMOD) a-x $(outbase).debug + $(QUIET)$(TOOL_GXX3_OBJCOPY) --strip-debug --strip-unneeded --add-gnu-debuglink=$(outbase).debug $(out) + endif +endef + + +## Link DLL +# @param $(target) Normalized main target name. +# @param $(out) Program name. +# @param $(objs) Object files to link together. +# @param $(libs) Libraries to search. +# @param $(libpath) Library search paths. +# @param $(flags) Flags. +# @param $(dirdep) Directory creation dependency. +# @param $(deps) Other dependencies. +# @param $(othersrc) Unhandled sources. +# @param $(custom_pre) Custom step invoked before linking. +# @param $(custom_post) Custom step invoked after linking. +# @param $(outbase) Output basename (full). Use this for list files and such. +TOOL_GXX3_LINK_DLL_OUTPUT = +TOOL_GXX3_LINK_DLL_OUTPUT_MAYBE = $(outbase).map +TOOL_GXX3_LINK_DLL_OUTPUT_DEBUG = $(outbase).debug +TOOL_GXX3_LINK_DLL_DEBUG_INSTALL_FN = $(2).debug=>$(basename $(3)).debug +TOOL_GXX3_LINK_DLL_DEPEND = $(foreach lib,$(libs),$(if $(findstring $(lib),$(subst /,x,$(lib))),, $(lib)))\ + $(filter %.def, $(othersrc)) +TOOL_GXX3_LINK_DLL_DEPORD = +define TOOL_GXX3_LINK_DLL_CMDS + $(QUIET)$(TOOL_GXX3_LD) $(TOOL_GXX3_LDFLAGS.dll) $(flags) -o $(out)\ + $(if $(filter-out win os2, $(KBUILD_TARGET)),$(call TOOL_GXX3_LD_SONAME,$(target),$(out)))\ + $(filter-out %.h.gch,$(objs))\ + $(filter %.def, $(othersrc))\ + $(foreach p,$(libpath), -L$(p))\ + $(foreach lib,$(libs), $(if $(findstring $(lib),$(subst /,x,$(lib))), -l$(patsubst lib%,%,$(lib)), $(lib)))\ + $(call TOOL_GXX3_LD_MAP,$(outbase).map) + ifeq ($(ld_debug),split) + $(QUIET)$(TOOL_GXX3_OBJCOPY) --only-keep-debug $(out) $(outbase).debug + $(QUIET)$(CHMOD) a-x $(outbase).debug + $(QUIET)$(TOOL_GXX3_OBJCOPY) --strip-debug --strip-unneeded --add-gnu-debuglink=$(outbase).debug $(out) + endif +endef + + +## Link system module (windows aka driver, linux aka kernel module) +# @param $(target) Normalized main target name. +# @param $(out) System module name. +# @param $(objs) Object files to link together. +# @param $(libs) Libraries to search. +# @param $(libpath) Library search paths. +# @param $(flags) Flags. +# @param $(dirdep) Directory creation dependency. +# @param $(deps) Other dependencies. +# @param $(othersrc) Unhandled sources. +# @param $(custom_pre) Custom step invoked before linking. +# @param $(custom_post) Custom step invoked after linking. +# @param $(outbase) Output basename (full). Use this for list files and such. +TOOL_GXX3_LINK_SYSMOD_OUTPUT = +TOOL_GXX3_LINK_SYSMOD_OUTPUT_MAYBE = $(outbase).map +TOOL_GXX3_LINK_SYSMOD_OUTPUT_DEBUG = $(outbase).debug +TOOL_GXX3_LINK_SYSMOD_DEBUG_INSTALL_FN = $(2).debug=>$(basename $(3)).debug +TOOL_GXX3_LINK_SYSMOD_DEPEND = $(foreach lib,$(libs),$(if $(findstring $(lib),$(subst /,x,$(lib))),, $(lib)))\ + $(filter %.def, $(othersrc)) +TOOL_GXX3_LINK_SYSMOD_DEPORD = +define TOOL_GXX3_LINK_SYSMOD_CMDS + $(QUIET)$(TOOL_GXX3_LD_SYSMOD) $(TOOL_GXX3_LDFLAGS.sysmod) $(flags) -o $(out) $(filter-out %.h.gch,$(objs))\ + $(filter %.def, $(othersrc))\ + $(foreach p,$(libpath), -L$(p))\ + $(foreach lib,$(libs), $(if $(findstring $(lib),$(subst /,x,$(lib))), -l$(patsubst lib%,%,$(lib)), $(lib)))\ + $(call TOOL_GXX3_LD_SYSMOD_MAP,$(outbase).map) + ifeq ($(ld_debug),split) + $(QUIET)$(TOOL_GXX3_OBJCOPY) --only-keep-debug $(out) $(outbase).debug + $(QUIET)$(CHMOD) a-x $(outbase).debug + $(QUIET)$(TOOL_GXX3_OBJCOPY) --strip-debug --strip-unneeded --add-gnu-debuglink=$(outbase).debug $(out) + endif +endef + |