diff options
Diffstat (limited to '')
| -rw-r--r-- | README.md | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/README.md b/README.md new file mode 100644 index 0000000..06d5d3c --- /dev/null +++ b/README.md @@ -0,0 +1,224 @@ +# kernel-wedge, an industrial strength kernel splitting tool + +kernel-wedge is used to generate kernel module udebs for the debian +installer. + +kernel-wedge is now used as part of the build process of the linux and +kfreebsd-* source packages, but can also be used separately. + +## Configuration directory layout + +The default-configuration directory contains the following files: + +modules/*<BR> +package-list + +The environment variable `$KW_DEFCONFIG_DIR` must be set, naming the +default-configuration directory. + +Each configuration directory contains the following files: + +kernel-versions<BR> +modules/*arch*/\*<BR> +exclude-packages (optional)<BR> +package-list + +The environment variable `$KW_CONFIG_DIR` may be set, naming the +configuration directory; otherwise the default value is "`.`". +Typically there is a separate configuration directory per +architecture, but this is not required. The configuration directory +may be the same as the default-configuration directory. + +## Use in a kernel source package + +### Configuration files + +The kernel-versions file lists the kernel flavours to produce packages +for. There are 6 whitespace separated fields per line, and it looks +something like this: + + # arch version flavour installedname suffix build-depends + i386 - 686 - - - + i386 - 686-pae - - - + +The arch column must be set to the target Debian architecture and the +flavour to the kernel flavour name that appears in the package and +file names. + +The version, installedname and build-depends columns must all be set +to "`-`" in this case. + +The suffix column is either `y`, `-` or `-`*suffix*; if it is `y` then +the kernel image inside the udeb will include the version and flavour +in its name, if it is `-`*suffix* then it will include this. (So will +the System.map). + +The udebs are named with the version of the kernel in their package name, +since that can be useful during kernel transitions. The string `-di` is +appended to prevent any posible collisions in names with real debs. + +The package-list and (optional) exclude-packages configuration files +are used by `gen-control`, as explained in its online help. + +Finally, you need a modules/*arch* directory, or directories. These are +used to list the modules that go in a package. For example, for i386, we +want to have some nic drivers, so we create a modules/i386/nic-modules +listing them: + + # My short list of nic modules. + 8139too + e100 + natsemi + ne2k-pci + tulip + winbond-840 + 3c59x + +But for Linux, drivers are organised into subdirectories by type, and +we can instead include (most) Ethernet drivers using a wildcard: + + drivers/net/ethernet/** + +Suppose we want a different set of modules in the 686 flavour kernel. +Then create a `modules/`*arch*-*flavour*`/nic-modules` instead, and it +will be used by preference. One udeb will be created for each modules +list file, containing the listed modules. The names of the files +should match the names of the various modules listed in the +package-list file in the default-configuration directory. + +You will also want a special modules list file for the kernel-image udeb. +If you need to include no modules with your kernel, it can be an empty file. +but you should have a modules/*arch*/kernel-image. + +`kernel-wedge` will copy the listed modules into each package. If a listed +module does not exist, it will fail by default. Sometimes you might want to +make a module be included but it's not fatal for it not to be available. +To indicate this, follow the module with a space and a "`?`". + +Module list files can also include other module lists by reference. This +works similar to cpp includes, and can be used to include module lists +distributed as part of kernel-wedge, or others. For example: + + # kernel-wedge's standard set of cdrom modules + #include <cdrom-core-modules> + # my own list + #include "../../includes/cdrom-modules" + +The `<name>` syntax includes a file from the modules subdirectory of the +default-configuration directory. + +A final capability of the module list files is the ability to include a +module list and then override parts of it. Follow a module name with " `-`" to +remove it from the list if it was previously listed, as by an include: + + # kernel-wedge's standard set of cdrom modules + #include <cdrom-core-modules> + # but not this one + sr_mod - + +### Debian directory + +To add the udeb packages to the control file, run for each +architecture: + +`kernel-wedge gen-control `*version*` >> debian/control` + +Where *version* is the kernel ABI/version that appears in package +names. + +In case you use the same kernel flavour name on multiple +architectures, you will need to merge the output from multiple +invocations of `kernel-wedge gen-control`. + +## Use in a separate source package + +### Configuration files + +The kernel-versions file looks something like this: + + # arch version flavour installedname suffix build-depends + i386 2.4.25-1 386 2.4.25-1-386 - kernel-image-2.4.25-1-386, kernel-pcmcia-modules-2.4.25-1-386 + i386 2.4.24 speakup 2.4.24-speakup - kernel-image-2.4.24-speakup + +In this case we are building two different flavours of i386 kernels. +We could just as easily be building kernels for different architectures. + +The arch, flavour and suffix columns are set as above. + +The version is the kernel version, or can be "`-`", in which case a +version must be specified when running the `gen-control` and +`install-files` commands. + +The installedname column gives the directory/filename that the kernel and +modules are installed using in the kernel `.deb`. If it is "`-`", it's +generated from the version and flavor. + +The build-depends are the package that is split up by kernel-wedge. + +The other configuration files are set in the same way as normal. + +### Debian directory + +Your source package will be very simple, looking something like this: + +debian/copyright<BR> +debian/changelog<BR> +debian/rules<BR> +debian/control.stub + +Let's get the easy files out of the way. The changelog is a +changelog, like any other, as is the copyright. The debian/rules +can be something as simple as this: + + #!/usr/bin/make -f + include /usr/share/kernel-wedge/generic-rules + +Or you can use the `kernel-wedge` command directly in your own rules file. +Run it for some semblance of usage help. + +`debian/control.stub` is the top of a control file. Something like this: + + Source: linux-kernel-di-i386 + Section: debian-installer + Priority: optional + Maintainer: Debian Install System Team <debian-boot@lists.debian.org> + Build-Depends: kernel-wedge + +The rest of the control file will be generated for you. + +Once you have your source package set up, run: + + kernel-wedge gen-control > debian/control + +You only need to do this once. Then build it like any other package. +Note that you will have to have the kernels listed as build dependencies +installed normally; but see "`kernel-wedge help build-all`" for an +alternative. + +## Misc other info + +The "`kernel-wedge copy-modules`" command does the actual copying of modules +to the temp dirs that are used to build the package. It is complicated by +the need to make sure that all of a module's dependencies are included in +its package, or in a package on which it depends. If necessary, extra +modules will be added to a package to make sure the dependencies are +satisfied. + +The dependency information from modules.dep is compared with the output of +the "`kernel-wedge gen-deps`" command, which extracts dependency information +from package-lists, and formats it in a form used by tsort. If any +additional modules are needed to meet dependencies of modules in the udebs, +they will automatically be added. Since that might result in modules being +copied to multiple udebs, the "`kernel-wedge find-dups`" command is used to +scan for duplicates of modules. When you have duplicates, you need to find +(or make) a package that both packages depend on, and move the duplicate +modules to it. Alternatively, as a quick hack you can just touch a file +named ignore-dups in the root of your package and duplicate modules will +stop being a fatal error. + +`SOURCEDIR` can be set to a directory containing a tree of kernel modules and +kernel image, and it will be used instead of the usual tree. That directory +will need to have a modules.dep file already generated for this to work +though -- but the modules.dep can even be copied from another system and +it'll work. This can be useful if you cannot install the required +kernel-image package, or are cross-compiling. |