Adding upstream version 1:2.0.27.upstream/1%2.0.27upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 246 insertions, 0 deletions

diff --git a/include/x86/mb_info.h b/include/x86/mb_info.h
new file mode 100644
index 0000000..fd1bb1d
--- /dev/null
+++ b/include/x86/mb_info.h
@@ -0,0 +1,246 @@
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2000  Free Software Foundation, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ *  The structure type "mod_list" is used by the "multiboot_info" structure.
+ */
+
+struct mod_list
+{
+	/* the memory used goes from bytes 'mod_start' to 'mod_end-1' inclusive */
+	uint32_t mod_start;
+	uint32_t mod_end;
+	
+	/* Module command line */
+	uint32_t cmdline;
+  
+	/* padding to take it to 16 bytes (must be zero) */
+	uint32_t pad;
+};
+
+
+/*
+ *  INT-15, AX=E820 style "AddressRangeDescriptor"
+ *  ...with a "size" parameter on the front which is the structure size - 4,
+ *  pointing to the next one, up until the full buffer length of the memory
+ *  map has been reached.
+ */
+
+struct AddrRangeDesc
+{
+	uint32_t size;
+	uint32_t base_addr_low;
+	uint32_t base_addr_high;
+	uint32_t length_low;
+	uint32_t length_high;
+	uint32_t Type;
+  
+  /* unspecified optional padding... */
+};
+
+/* usable memory "Type", all others are reserved.  */
+#define MB_ARD_MEMORY		1
+
+
+/* Drive Info structure.  */
+struct drive_info
+{
+	/* The size of this structure.  */
+	uint32_t size;
+
+	/* The BIOS drive number.  */
+	uint8_t drive_number;
+	
+	/* The access mode (see below).  */
+	uint8_t drive_mode;
+	
+	/* The BIOS geometry.  */
+	uint16_t drive_cylinders;
+	uint8_t drive_heads;
+	uint8_t drive_sectors;
+	
+	/* The array of I/O ports used for the drive.  */
+	uint16_t drive_ports[0];
+};
+
+/* Drive Mode.  */
+#define MB_DI_CHS_MODE		0
+#define MB_DI_LBA_MODE		1
+
+
+/* APM BIOS info.  */
+struct apm_info
+{
+	uint16_t version;
+	uint16_t cseg;
+	uint32_t offset;
+	uint32_t cseg_16;
+	uint32_t dseg_16;
+	uint32_t cseg_len;
+	uint32_t cseg_16_len;
+	uint32_t dseg_16_len;
+};
+
+
+/*
+ *  MultiBoot Info description
+ *
+ *  This is the struct passed to the boot image.  This is done by placing
+ *  its address in the EAX register.
+ */
+
+struct multiboot_info
+{
+	/* MultiBoot info version number */
+	uint32_t flags;
+	
+	/* Available memory from BIOS */
+	uint32_t mem_lower;
+	uint32_t mem_upper;
+	
+	/* "root" partition */
+	uint32_t boot_device;
+	
+	/* Kernel command line */
+	uint32_t cmdline;
+	
+	/* Boot-Module list */
+	uint32_t mods_count;
+	uint32_t mods_addr;
+	
+	union
+	{
+		struct
+		{
+			/* (a.out) Kernel symbol table info */
+			uint32_t tabsize;
+			uint32_t strsize;
+			uint32_t addr;
+			uint32_t pad;
+		}
+		a;
+		
+		struct
+		{
+			/* (ELF) Kernel section header table */
+			uint32_t num;
+			uint32_t size;
+			uint32_t addr;
+			uint32_t shndx;
+		}
+		e;
+	}
+	syms;
+	
+	/* Memory Mapping buffer */
+	uint32_t mmap_length;
+	uint32_t mmap_addr;
+	
+	/* Drive Info buffer */
+	uint32_t drives_length;
+	uint32_t drives_addr;
+	
+	/* ROM configuration table */
+	uint32_t config_table;
+	
+	/* Boot Loader Name */
+	uint32_t boot_loader_name;
+	
+	/* APM table */
+	uint32_t apm_table;
+	
+	/* Video */
+	uint32_t vbe_control_info;
+	uint32_t vbe_mode_info;
+	uint16_t vbe_mode;
+	uint16_t vbe_interface_seg;
+	uint16_t vbe_interface_off;
+	uint16_t vbe_interface_len;
+
+	uint64_t framebuffer_addr;
+	uint32_t framebuffer_pitch;
+	uint32_t framebuffer_width;
+	uint32_t framebuffer_height;
+	uint8_t  framebuffer_bpp;
+	uint8_t	 framebuffer_type;
+
+	union {
+		struct {
+			uint32_t	framebuffer_palette_addr;
+			uint16_t	framebuffer_palette_num_color;
+		};
+		struct {
+			uint8_t		framebuffer_red_field_position;
+			uint8_t		framebuffer_red_mask_size;
+			uint8_t		framebuffer_green_field_position;
+			uint8_t		framebuffer_green_mask_size;
+			uint8_t		framebuffer_blue_field_position;
+			uint8_t		framebuffer_blue_mask_size;
+		};
+	};
+};
+
+/*
+ *  Flags to be set in the 'flags' parameter above
+ */
+
+/* is there basic lower/upper memory information? */
+#define MB_INFO_MEMORY			0x00000001
+/* is there a boot device set? */
+#define MB_INFO_BOOTDEV			0x00000002
+/* is the command-line defined? */
+#define MB_INFO_CMDLINE			0x00000004
+/* are there modules to do something with? */
+#define MB_INFO_MODS			0x00000008
+
+/* These next two are mutually exclusive */
+
+/* is there a symbol table loaded? */
+#define MB_INFO_AOUT_SYMS		0x00000010
+/* is there an ELF section header table? */
+#define MB_INFO_ELF_SHDR		0x00000020
+
+/* is there a full memory map? */
+#define MB_INFO_MEM_MAP			0x00000040
+
+/* Is there drive info?  */
+#define MB_INFO_DRIVE_INFO		0x00000080
+
+/* Is there a config table?  */
+#define MB_INFO_CONFIG_TABLE		0x00000100
+
+/* Is there a boot loader name?  */
+#define MB_INFO_BOOT_LOADER_NAME	0x00000200
+
+/* Is there a APM table?  */
+#define MB_INFO_APM_TABLE		0x00000400
+
+/* Is there video information?  */
+#define MB_INFO_VIDEO_INFO		0x00000800
+#define MB_INFO_FRAMEBUFFER_INFO	0x00001000
+
+#define MB_FRAMEBUFFER_TYPE_INDEXED	0
+#define MB_FRAMEBUFFER_TYPE_RGB		1
+#define MB_FRAMEBUFFER_TYPE_EGA_TEXT	2
+
+/*
+ *  The following value must be present in the EAX register.
+ */
+
+#define MULTIBOOT_VALID			0x2BADB002