diff options
Diffstat (limited to '')
-rw-r--r-- | usr/dash/options.c | 559 |
1 files changed, 559 insertions, 0 deletions
diff --git a/usr/dash/options.c b/usr/dash/options.c new file mode 100644 index 0000000..6f381e6 --- /dev/null +++ b/usr/dash/options.c @@ -0,0 +1,559 @@ +/*- + * Copyright (c) 1991, 1993 + * The Regents of the University of California. All rights reserved. + * Copyright (c) 1997-2005 + * Herbert Xu <herbert@gondor.apana.org.au>. All rights reserved. + * + * This code is derived from software contributed to Berkeley by + * Kenneth Almquist. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include <signal.h> +#include <unistd.h> +#include <stdlib.h> + +#include "shell.h" +#define DEFINE_OPTIONS +#include "options.h" +#undef DEFINE_OPTIONS +#include "nodes.h" /* for other header files */ +#include "eval.h" +#include "jobs.h" +#include "input.h" +#include "output.h" +#include "trap.h" +#include "var.h" +#include "memalloc.h" +#include "error.h" +#include "mystring.h" +#ifndef SMALL +#include "myhistedit.h" +#endif +#include "show.h" + +char *arg0; /* value of $0 */ +struct shparam shellparam; /* current positional parameters */ +char **argptr; /* argument list for builtin commands */ +char *optionarg; /* set by nextopt (like getopt) */ +char *optptr; /* used by nextopt */ + +char *minusc; /* argument to -c option */ + +static const char *const optnames[NOPTS] = { + "errexit", + "noglob", + "ignoreeof", + "interactive", + "monitor", + "noexec", + "stdin", + "xtrace", + "verbose", + "vi", + "emacs", + "noclobber", + "allexport", + "notify", + "nounset", + "nolog", + "debug", +}; + +const char optletters[NOPTS] = { + 'e', + 'f', + 'I', + 'i', + 'm', + 'n', + 's', + 'x', + 'v', + 'V', + 'E', + 'C', + 'a', + 'b', + 'u', + 0, + 0, +}; + +char optlist[NOPTS]; + + +static int options(int); +STATIC void minus_o(char *, int); +STATIC void setoption(int, int); +STATIC int getopts(char *, char *, char **); + + +/* + * Process the shell command line arguments. + */ + +int +procargs(int argc, char **argv) +{ + int i; + const char *xminusc; + char **xargv; + int login; + + xargv = argv; + login = xargv[0] && xargv[0][0] == '-'; + arg0 = xargv[0]; + if (argc > 0) + xargv++; + for (i = 0; i < NOPTS; i++) + optlist[i] = 2; + argptr = xargv; + login |= options(1); + xargv = argptr; + xminusc = minusc; + if (*xargv == NULL) { + if (xminusc) + sh_error("-c requires an argument"); + sflag = 1; + } + if (iflag == 2 && sflag == 1 && isatty(0) && isatty(1)) + iflag = 1; + if (mflag == 2) + mflag = iflag; + for (i = 0; i < NOPTS; i++) + if (optlist[i] == 2) + optlist[i] = 0; +#if DEBUG == 2 + debug = 1; +#endif + /* POSIX 1003.2: first arg after -c cmd is $0, remainder $1... */ + if (xminusc) { + minusc = *xargv++; + if (*xargv) + goto setarg0; + } else if (!sflag) { + setinputfile(*xargv, 0); +setarg0: + arg0 = *xargv++; + commandname = arg0; + } + + shellparam.p = xargv; + shellparam.optind = 1; + shellparam.optoff = -1; + /* assert(shellparam.malloc == 0 && shellparam.nparam == 0); */ + while (*xargv) { + shellparam.nparam++; + xargv++; + } + optschanged(); + + return login; +} + + +void +optschanged(void) +{ +#ifdef DEBUG + opentrace(); +#endif + setinteractive(iflag); +#ifndef SMALL + histedit(); +#endif + setjobctl(mflag); +} + +/* + * Process shell options. The global variable argptr contains a pointer + * to the argument list; we advance it past the options. + */ + +STATIC int +options(int cmdline) +{ + char *p; + int val; + int c; + int login = 0; + + if (cmdline) + minusc = NULL; + while ((p = *argptr) != NULL) { + argptr++; + if ((c = *p++) == '-') { + val = 1; + if (p[0] == '\0' || (p[0] == '-' && p[1] == '\0')) { + if (!cmdline) { + /* "-" means turn off -x and -v */ + if (p[0] == '\0') + xflag = vflag = 0; + /* "--" means reset params */ + else if (*argptr == NULL) + setparam(argptr); + } + break; /* "-" or "--" terminates options */ + } + } else if (c == '+') { + val = 0; + } else { + argptr--; + break; + } + while ((c = *p++) != '\0') { + if (c == 'c' && cmdline) { + minusc = p; /* command is after shell args*/ + } else if (c == 'l' && cmdline) { + login = 1; + } else if (c == 'o') { + minus_o(*argptr, val); + if (*argptr) + argptr++; + } else { + setoption(c, val); + } + } + } + + return login; +} + +STATIC void +minus_o(char *name, int val) +{ + int i; + + if (name == NULL) { + if (val) { + out1str("Current option settings\n"); + for (i = 0; i < NOPTS; i++) + out1fmt("%-16s%s\n", optnames[i], + optlist[i] ? "on" : "off"); + } else { + for (i = 0; i < NOPTS; i++) + out1fmt("set %s %s\n", + optlist[i] ? "-o" : "+o", + optnames[i]); + + } + } else { + for (i = 0; i < NOPTS; i++) + if (equal(name, optnames[i])) { + optlist[i] = val; + return; + } + sh_error("Illegal option -o %s", name); + } +} + + +STATIC void +setoption(int flag, int val) +{ + int i; + + for (i = 0; i < NOPTS; i++) + if (optletters[i] == flag) { + optlist[i] = val; + if (val) { + /* #%$ hack for ksh semantics */ + if (flag == 'V') + Eflag = 0; + else if (flag == 'E') + Vflag = 0; + } + return; + } + sh_error("Illegal option -%c", flag); + /* NOTREACHED */ +} + + + +/* + * Set the shell parameters. + */ + +void +setparam(char **argv) +{ + char **newparam; + char **ap; + int nparam; + + for (nparam = 0 ; argv[nparam] ; nparam++); + ap = newparam = ckmalloc((nparam + 1) * sizeof *ap); + while (*argv) { + *ap++ = savestr(*argv++); + } + *ap = NULL; + freeparam(&shellparam); + shellparam.malloc = 1; + shellparam.nparam = nparam; + shellparam.p = newparam; + shellparam.optind = 1; + shellparam.optoff = -1; +} + + +/* + * Free the list of positional parameters. + */ + +void +freeparam(volatile struct shparam *param) +{ + char **ap; + + if (param->malloc) { + for (ap = param->p ; *ap ; ap++) + ckfree(*ap); + ckfree(param->p); + } +} + + + +/* + * The shift builtin command. + */ + +int +shiftcmd(int argc, char **argv) +{ + int n; + char **ap1, **ap2; + + n = 1; + if (argc > 1) + n = number(argv[1]); + if (n > shellparam.nparam) + sh_error("can't shift that many"); + INTOFF; + shellparam.nparam -= n; + for (ap1 = shellparam.p ; --n >= 0 ; ap1++) { + if (shellparam.malloc) + ckfree(*ap1); + } + ap2 = shellparam.p; + while ((*ap2++ = *ap1++) != NULL); + shellparam.optind = 1; + shellparam.optoff = -1; + INTON; + return 0; +} + + + +/* + * The set command builtin. + */ + +int +setcmd(int argc, char **argv) +{ + if (argc == 1) + return showvars(nullstr, 0, VUNSET); + INTOFF; + options(0); + optschanged(); + if (*argptr != NULL) { + setparam(argptr); + } + INTON; + return 0; +} + + +void +getoptsreset(value) + const char *value; +{ + shellparam.optind = number(value) ?: 1; + shellparam.optoff = -1; +} + +/* + * The getopts builtin. Shellparam.optnext points to the next argument + * to be processed. Shellparam.optptr points to the next character to + * be processed in the current argument. If shellparam.optnext is NULL, + * then it's the first time getopts has been called. + */ + +int +getoptscmd(int argc, char **argv) +{ + char **optbase; + + if (argc < 3) + sh_error("Usage: getopts optstring var [arg]"); + else if (argc == 3) { + optbase = shellparam.p; + if ((unsigned)shellparam.optind > shellparam.nparam + 1) { + shellparam.optind = 1; + shellparam.optoff = -1; + } + } + else { + optbase = &argv[3]; + if ((unsigned)shellparam.optind > argc - 2) { + shellparam.optind = 1; + shellparam.optoff = -1; + } + } + + return getopts(argv[1], argv[2], optbase); +} + +STATIC int +getopts(char *optstr, char *optvar, char **optfirst) +{ + char *p, *q; + char c = '?'; + int done = 0; + char s[2]; + char **optnext; + int ind = shellparam.optind; + int off = shellparam.optoff; + + shellparam.optind = -1; + optnext = optfirst + ind - 1; + + if (ind <= 1 || off < 0 || strlen(optnext[-1]) < off) + p = NULL; + else + p = optnext[-1] + off; + if (p == NULL || *p == '\0') { + /* Current word is done, advance */ + p = *optnext; + if (p == NULL || *p != '-' || *++p == '\0') { +atend: + p = NULL; + done = 1; + goto out; + } + optnext++; + if (p[0] == '-' && p[1] == '\0') /* check for "--" */ + goto atend; + } + + c = *p++; + for (q = optstr; *q != c; ) { + if (*q == '\0') { + if (optstr[0] == ':') { + s[0] = c; + s[1] = '\0'; + setvar("OPTARG", s, 0); + } else { + outfmt(&errout, "Illegal option -%c\n", c); + (void) unsetvar("OPTARG"); + } + c = '?'; + goto out; + } + if (*++q == ':') + q++; + } + + if (*++q == ':') { + if (*p == '\0' && (p = *optnext) == NULL) { + if (optstr[0] == ':') { + s[0] = c; + s[1] = '\0'; + setvar("OPTARG", s, 0); + c = ':'; + } else { + outfmt(&errout, "No arg for -%c option\n", c); + (void) unsetvar("OPTARG"); + c = '?'; + } + goto out; + } + + if (p == *optnext) + optnext++; + setvar("OPTARG", p, 0); + p = NULL; + } else + setvar("OPTARG", nullstr, 0); + +out: + ind = optnext - optfirst + 1; + setvarint("OPTIND", ind, VNOFUNC); + s[0] = c; + s[1] = '\0'; + setvar(optvar, s, 0); + + shellparam.optoff = p ? p - *(optnext - 1) : -1; + shellparam.optind = ind; + + return done; +} + +/* + * XXX - should get rid of. have all builtins use getopt(3). the + * library getopt must have the BSD extension static variable "optreset" + * otherwise it can't be used within the shell safely. + * + * Standard option processing (a la getopt) for builtin routines. The + * only argument that is passed to nextopt is the option string; the + * other arguments are unnecessary. It return the character, or '\0' on + * end of input. + */ + +int +nextopt(const char *optstring) +{ + char *p; + const char *q; + char c; + + if ((p = optptr) == NULL || *p == '\0') { + p = *argptr; + if (p == NULL || *p != '-' || *++p == '\0') + return '\0'; + argptr++; + if (p[0] == '-' && p[1] == '\0') /* check for "--" */ + return '\0'; + } + c = *p++; + for (q = optstring ; *q != c ; ) { + if (*q == '\0') + sh_error("Illegal option -%c", c); + if (*++q == ':') + q++; + } + if (*++q == ':') { + if (*p == '\0' && (p = *argptr++) == NULL) + sh_error("No arg for -%c option", c); + optionarg = p; + p = NULL; + } + optptr = p; + return c; +} |