diff options
Diffstat (limited to 'usr/dash/sh.1')
| -rw-r--r-- | usr/dash/sh.1 | 2332 |
1 files changed, 2332 insertions, 0 deletions
diff --git a/usr/dash/sh.1 b/usr/dash/sh.1 new file mode 100644 index 0000000..ff5881a --- /dev/null +++ b/usr/dash/sh.1 @@ -0,0 +1,2332 @@ +.\" Copyright (c) 1991, 1993 +.\" The Regents of the University of California. All rights reserved. +.\" Copyright (c) 1997-2005 +.\" Herbert Xu <herbert@gondor.apana.org.au>. All rights reserved. +.\" +.\" This code is derived from software contributed to Berkeley by +.\" Kenneth Almquist. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" 3. Neither the name of the University nor the names of its contributors +.\" may be used to endorse or promote products derived from this software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" @(#)sh.1 8.6 (Berkeley) 5/4/95 +.\" +.Dd January 19, 2003 +.Os +.Dt SH 1 +.Sh NAME +.Nm sh +.Nd command interpreter (shell) +.Sh SYNOPSIS +.Nm +.Bk -words +.Op Fl aCefnuvxIimqVEb +.Op Cm +aCefnuvxIimqVEb +.Ek +.Bk -words +.Op Fl o Ar option_name +.Op Cm +o Ar option_name +.Ek +.Bk -words +.Op Ar command_file Oo Ar argument ... Oc +.Ek +.Nm +.Fl c +.Bk -words +.Op Fl aCefnuvxIimqVEb +.Op Cm +aCefnuvxIimqVEb +.Ek +.Bk -words +.Op Fl o Ar option_name +.Op Cm +o Ar option_name +.Ek +.Bk -words +.Ar command_string +.Op Ar command_name Oo Ar argument ... Oc +.Ek +.Nm +.Fl s +.Bk -words +.Op Fl aCefnuvxIimqVEb +.Op Cm +aCefnuvxIimqVEb +.Ek +.Bk -words +.Op Fl o Ar option_name +.Op Cm +o Ar option_name +.Ek +.Bk -words +.Op Ar argument ... +.Ek +.Sh DESCRIPTION +.Nm +is the standard command interpreter for the system. +The current version of +.Nm +is in the process of being changed to conform with the +.Tn POSIX +1003.2 and 1003.2a specifications for the shell. +This version has many +features which make it appear similar in some respects to the Korn shell, +but it is not a Korn shell clone (see +.Xr ksh 1 ) . +Only features designated by +.Tn POSIX , +plus a few Berkeley extensions, are being incorporated into this shell. +We expect +.Tn POSIX +conformance by the time 4.4 BSD is released. +This man page is not intended +to be a tutorial or a complete specification of the shell. +.Ss Overview +The shell is a command that reads lines from either a file or the +terminal, interprets them, and generally executes other commands. +It is the program that is running when a user logs into the system +(although a user can select a different shell with the +.Xr chsh 1 +command). +The shell implements a language that has flow control +constructs, a macro facility that provides a variety of features in +addition to data storage, along with built in history and line editing +capabilities. +It incorporates many features to aid interactive use and +has the advantage that the interpretative language is common to both +interactive and non-interactive use (shell scripts). +That is, commands +can be typed directly to the running shell or can be put into a file and +the file can be executed directly by the shell. +.Ss Invocation +If no args are present and if the standard input of the shell +is connected to a terminal (or if the +.Fl i +flag is set), +and the +.Fl c +option is not present, the shell is considered an interactive shell. +An interactive shell generally prompts before each command and handles +programming and command errors differently (as described below). +When first starting, +the shell inspects argument 0, and if it begins with a dash +.Sq - , +the shell is also considered +a login shell. +This is normally done automatically by the system +when the user first logs in. +A login shell first reads commands +from the files +.Pa /etc/profile +and +.Pa .profile +if they exist. +If the environment variable +.Ev ENV +is set on entry to an interactive shell, or is set in the +.Pa .profile +of a login shell, the shell next reads +commands from the file named in +.Ev ENV . +Therefore, a user should place commands that are to be executed only at +login time in the +.Pa .profile +file, and commands that are executed for every interactive shell inside the +.Ev ENV +file. +To set the +.Ev ENV +variable to some file, place the following line in your +.Pa .profile +of your home directory +.Pp +.Dl ENV=$HOME/.shinit; export ENV +.Pp +substituting for +.Dq .shinit +any filename you wish. +.Pp +If command line arguments besides the options have been specified, then +the shell treats the first argument as the name of a file from which to +read commands (a shell script), and the remaining arguments are set as the +positional parameters of the shell ($1, $2, etc). +Otherwise, the shell +reads commands from its standard input. +.Ss Argument List Processing +All of the single letter options have a corresponding name that can be +used as an argument to the +.Fl o +option. +The set +.Fl o +name is provided next to the single letter option in +the description below. +Specifying a dash +.Dq - +turns the option on, while using a plus +.Dq + +disables the option. +The following options can be set from the command line or +with the +.Ic set +builtin (described later). +.Bl -tag -width aaaallexportfoo -offset indent +.It Fl a Em allexport +Export all variables assigned to. +.It Fl c +Read commands from the +.Ar command_string +operand instead of from the standard input. +Special parameter 0 will be set from the +.Ar command_name +operand and the positional parameters ($1, $2, etc.) +set from the remaining argument operands. +.It Fl C Em noclobber +Don't overwrite existing files with +.Dq \*[Gt] . +.It Fl e Em errexit +If not interactive, exit immediately if any untested command fails. +The exit status of a command is considered to be +explicitly tested if the command is used to control an +.Ic if , +.Ic elif , +.Ic while , +or +.Ic until ; +or if the command is the left hand operand of an +.Dq && +or +.Dq || +operator. +.It Fl f Em noglob +Disable pathname expansion. +.It Fl n Em noexec +If not interactive, read commands but do not execute them. +This is useful for checking the syntax of shell scripts. +.It Fl u Em nounset +Write a message to standard error when attempting to expand a variable +that is not set, and if the shell is not interactive, exit immediately. +.It Fl v Em verbose +The shell writes its input to standard error as it is read. +Useful for debugging. +.It Fl x Em xtrace +Write each command to standard error (preceded by a +.Sq +\ ) +before it is executed. +Useful for debugging. +.It Fl I Em ignoreeof +Ignore EOF's from input when interactive. +.It Fl i Em interactive +Force the shell to behave interactively. +.It Fl m Em monitor +Turn on job control (set automatically when interactive). +.It Fl s Em stdin +Read commands from standard input (set automatically if no file arguments +are present). +This option has no effect when set after the shell has +already started running (i.e. with +.Ic set ) . +.It Fl V Em vi +Enable the built-in +.Xr vi 1 +command line editor (disables +.Fl E +if it has been set). +.It Fl E Em emacs +Enable the built-in +.Xr emacs 1 +command line editor (disables +.Fl V +if it has been set). +.It Fl b Em notify +Enable asynchronous notification of background job completion. +(UNIMPLEMENTED for 4.4alpha) +.El +.Ss Lexical Structure +The shell reads input in terms of lines from a file and breaks it up into +words at whitespace (blanks and tabs), and at certain sequences of +characters that are special to the shell called +.Dq operators . +There are two types of operators: control operators and redirection +operators (their meaning is discussed later). +Following is a list of operators: +.Bl -ohang -offset indent +.It "Control operators:" +.Dl & && \&( \&) \&; ;; | || \*[Lt]newline\*[Gt] +.It "Redirection operators:" +.Dl \*[Lt] \*[Gt] \*[Gt]| \*[Lt]\*[Lt] \*[Gt]\*[Gt] \*[Lt]& \*[Gt]& \*[Lt]\*[Lt]- \*[Lt]\*[Gt] +.El +.Ss Quoting +Quoting is used to remove the special meaning of certain characters or +words to the shell, such as operators, whitespace, or keywords. +There are three types of quoting: matched single quotes, +matched double quotes, and backslash. +.Ss Backslash +A backslash preserves the literal meaning of the following +character, with the exception of +.Aq newline . +A backslash preceding a +.Aq newline +is treated as a line continuation. +.Ss Single Quotes +Enclosing characters in single quotes preserves the literal meaning of all +the characters (except single quotes, making it impossible to put +single-quotes in a single-quoted string). +.Ss Double Quotes +Enclosing characters within double quotes preserves the literal +meaning of all characters except dollarsign +.Pq $ , +backquote +.Pq ` , +and backslash +.Pq \e . +The backslash inside double quotes is historically weird, and serves to +quote only the following characters: +.Dl $ ` \*q \e \*[Lt]newline\*[Gt] . +Otherwise it remains literal. +.Ss Reserved Words +Reserved words are words that have special meaning to the +shell and are recognized at the beginning of a line and +after a control operator. +The following are reserved words: +.Bl -column while while while while while -offset indent +.It ! Ta elif Ta fi Ta while Ta case +.It else Ta for Ta then Ta { Ta } +.It do Ta done Ta until Ta if Ta esac +.El +.Pp +Their meaning is discussed later. +.Ss Aliases +An alias is a name and corresponding value set using the +.Xr alias 1 +builtin command. +Whenever a reserved word may occur (see above), +and after checking for reserved words, the shell +checks the word to see if it matches an alias. +If it does, it replaces it in the input stream with its value. +For example, if there is an alias called +.Dq lf +with the value +.Dq "ls -F" , +then the input: +.Pp +.Dl lf foobar Aq return +.Pp +would become +.Pp +.Dl ls -F foobar Aq return +.Pp +Aliases provide a convenient way for naive users to create shorthands for +commands without having to learn how to create functions with arguments. +They can also be used to create lexically obscure code. +This use is discouraged. +.Ss Commands +The shell interprets the words it reads according to a language, the +specification of which is outside the scope of this man page (refer to the +BNF in the +.Tn POSIX +1003.2 document). +Essentially though, a line is read and if the first +word of the line (or after a control operator) is not a reserved word, +then the shell has recognized a simple command. +Otherwise, a complex +command or some other special construct may have been recognized. +.Ss Simple Commands +If a simple command has been recognized, the shell performs +the following actions: +.Bl -enum -offset indent +.It +Leading words of the form +.Dq name=value +are stripped off and assigned to the environment of the simple command. +Redirection operators and their arguments (as described below) are +stripped off and saved for processing. +.It +The remaining words are expanded as described in +the section called +.Dq Expansions , +and the first remaining word is considered the command name and the +command is located. +The remaining words are considered the arguments of the command. +If no command name resulted, then the +.Dq name=value +variable assignments recognized in item 1 affect the current shell. +.It +Redirections are performed as described in the next section. +.El +.Ss Redirections +Redirections are used to change where a command reads its input or sends +its output. +In general, redirections open, close, or duplicate an +existing reference to a file. +The overall format used for redirection is: +.Pp +.Dl [n] Va redir-op Ar file +.Pp +where +.Va redir-op +is one of the redirection operators mentioned previously. +Following is a list of the possible redirections. +The +.Bq n +is an optional number, as in +.Sq 3 +(not +.Sq Bq 3 , +that refers to a file descriptor. +.Bl -tag -width aaabsfiles -offset indent +.It [n] Ns \*[Gt] file +Redirect standard output (or n) to file. +.It [n] Ns \*[Gt]| file +Same, but override the +.Fl C +option. +.It [n] Ns \*[Gt]\*[Gt] file +Append standard output (or n) to file. +.It [n] Ns \*[Lt] file +Redirect standard input (or n) from file. +.It [n1] Ns \*[Lt]& Ns n2 +Duplicate standard input (or n1) from file descriptor n2. +.It [n] Ns \*[Lt]&- +Close standard input (or n). +.It [n1] Ns \*[Gt]& Ns n2 +Duplicate standard output (or n1) to n2. +.It [n] Ns \*[Gt]&- +Close standard output (or n). +.It [n] Ns \*[Lt]\*[Gt] file +Open file for reading and writing on standard input (or n). +.El +.Pp +The following redirection is often called a +.Dq here-document . +.Bl -item -offset indent +.It +.Li [n]\*[Lt]\*[Lt] delimiter +.Dl here-doc-text ... +.Li delimiter +.El +.Pp +All the text on successive lines up to the delimiter is saved away and +made available to the command on standard input, or file descriptor n if +it is specified. +If the delimiter as specified on the initial line is +quoted, then the here-doc-text is treated literally, otherwise the text is +subjected to parameter expansion, command substitution, and arithmetic +expansion (as described in the section on +.Dq Expansions ) . +If the operator is +.Dq \*[Lt]\*[Lt]- +instead of +.Dq \*[Lt]\*[Lt] , +then leading tabs in the here-doc-text are stripped. +.Ss Search and Execution +There are three types of commands: shell functions, builtin commands, and +normal programs -- and the command is searched for (by name) in that order. +They each are executed in a different way. +.Pp +When a shell function is executed, all of the shell positional parameters +(except $0, which remains unchanged) are set to the arguments of the shell +function. +The variables which are explicitly placed in the environment of +the command (by placing assignments to them before the function name) are +made local to the function and are set to the values given. +Then the command given in the function definition is executed. +The positional parameters are restored to their original values +when the command completes. +This all occurs within the current shell. +.Pp +Shell builtins are executed internally to the shell, without spawning a +new process. +.Pp +Otherwise, if the command name doesn't match a function or builtin, the +command is searched for as a normal program in the file system (as +described in the next section). +When a normal program is executed, the shell runs the program, +passing the arguments and the environment to the program. +If the program is not a normal executable file (i.e., if it does +not begin with the "magic number" whose +.Tn ASCII +representation is "#!", so +.Xr execve 2 +returns +.Er ENOEXEC +then) the shell will interpret the program in a subshell. +The child shell will reinitialize itself in this case, +so that the effect will be as if a +new shell had been invoked to handle the ad-hoc shell script, except that +the location of hashed commands located in the parent shell will be +remembered by the child. +.Pp +Note that previous versions of this document and the source code itself +misleadingly and sporadically refer to a shell script without a magic +number as a "shell procedure". +.Ss Path Search +When locating a command, the shell first looks to see if it has a shell +function by that name. +Then it looks for a builtin command by that name. +If a builtin command is not found, one of two things happen: +.Bl -enum +.It +Command names containing a slash are simply executed without performing +any searches. +.It +The shell searches each entry in +.Ev PATH +in turn for the command. +The value of the +.Ev PATH +variable should be a series of entries separated by colons. +Each entry consists of a directory name. +The current directory may be indicated +implicitly by an empty directory name, or explicitly by a single period. +.El +.Ss Command Exit Status +Each command has an exit status that can influence the behaviour +of other shell commands. +The paradigm is that a command exits +with zero for normal or success, and non-zero for failure, +error, or a false indication. +The man page for each command +should indicate the various exit codes and what they mean. +Additionally, the builtin commands return exit codes, as does +an executed shell function. +.Pp +If a command consists entirely of variable assignments then the +exit status of the command is that of the last command substitution +if any, otherwise 0. +.Ss Complex Commands +Complex commands are combinations of simple commands with control +operators or reserved words, together creating a larger complex command. +More generally, a command is one of the following: +.Bl -bullet +.It +simple command +.It +pipeline +.It +list or compound-list +.It +compound command +.It +function definition +.El +.Pp +Unless otherwise stated, the exit status of a command is that of the last +simple command executed by the command. +.Ss Pipelines +A pipeline is a sequence of one or more commands separated +by the control operator |. +The standard output of all but +the last command is connected to the standard input +of the next command. +The standard output of the last +command is inherited from the shell, as usual. +.Pp +The format for a pipeline is: +.Pp +.Dl [!] command1 [ | command2 ...] +.Pp +The standard output of command1 is connected to the standard input of +command2. +The standard input, standard output, or both of a command is +considered to be assigned by the pipeline before any redirection specified +by redirection operators that are part of the command. +.Pp +If the pipeline is not in the background (discussed later), the shell +waits for all commands to complete. +.Pp +If the reserved word ! does not precede the pipeline, the exit status is +the exit status of the last command specified in the pipeline. +Otherwise, the exit status is the logical NOT of the exit status of the +last command. +That is, if the last command returns zero, the exit status +is 1; if the last command returns greater than zero, the exit status is +zero. +.Pp +Because pipeline assignment of standard input or standard output or both +takes place before redirection, it can be modified by redirection. +For example: +.Pp +.Dl $ command1 2\*[Gt]&1 | command2 +.Pp +sends both the standard output and standard error of command1 +to the standard input of command2. +.Pp +A ; or +.Aq newline +terminator causes the preceding AND-OR-list (described +next) to be executed sequentially; a & causes asynchronous execution of +the preceding AND-OR-list. +.Pp +Note that unlike some other shells, each process in the pipeline is a +child of the invoking shell (unless it is a shell builtin, in which case +it executes in the current shell -- but any effect it has on the +environment is wiped). +.Ss Background Commands -- & +If a command is terminated by the control operator ampersand (&), the +shell executes the command asynchronously -- that is, the shell does not +wait for the command to finish before executing the next command. +.Pp +The format for running a command in background is: +.Pp +.Dl command1 & [command2 & ...] +.Pp +If the shell is not interactive, the standard input of an asynchronous +command is set to +.Pa /dev/null . +.Ss Lists -- Generally Speaking +A list is a sequence of zero or more commands separated by newlines, +semicolons, or ampersands, and optionally terminated by one of these three +characters. +The commands in a list are executed in the order they are written. +If command is followed by an ampersand, the shell starts the +command and immediately proceed onto the next command; otherwise it waits +for the command to terminate before proceeding to the next one. +.Ss Short-Circuit List Operators +.Dq && +and +.Dq || +are AND-OR list operators. +.Dq && +executes the first command, and then executes the second command iff the +exit status of the first command is zero. +.Dq || +is similar, but executes the second command iff the exit status of the first +command is nonzero. +.Dq && +and +.Dq || +both have the same priority. +.Ss Flow-Control Constructs -- if, while, for, case +The syntax of the if command is +.Bd -literal -offset indent +if list +then list +[ elif list +then list ] ... +[ else list ] +fi +.Ed +.Pp +The syntax of the while command is +.Bd -literal -offset indent +while list +do list +done +.Ed +.Pp +The two lists are executed repeatedly while the exit status of the +first list is zero. +The until command is similar, but has the word +until in place of while, which causes it to +repeat until the exit status of the first list is zero. +.Pp +The syntax of the for command is +.Bd -literal -offset indent +for variable in word ... +do list +done +.Ed +.Pp +The words are expanded, and then the list is executed repeatedly with the +variable set to each word in turn. +do and done may be replaced with +.Dq { +and +.Dq } . +.Pp +The syntax of the break and continue command is +.Bd -literal -offset indent +break [ num ] +continue [ num ] +.Ed +.Pp +Break terminates the num innermost for or while loops. +Continue continues with the next iteration of the innermost loop. +These are implemented as builtin commands. +.Pp +The syntax of the case command is +.Bd -literal -offset indent +case word in +pattern) list ;; +\&... +esac +.Ed +.Pp +The pattern can actually be one or more patterns (see +.Sx Shell Patterns +described later), separated by +.Dq \*(Ba +characters. +.Ss Grouping Commands Together +Commands may be grouped by writing either +.Pp +.Dl (list) +.Pp +or +.Pp +.Dl { list; } +.Pp +The first of these executes the commands in a subshell. +Builtin commands grouped into a (list) will not affect the current shell. +The second form does not fork another shell so is slightly more efficient. +Grouping commands together this way allows you to redirect +their output as though they were one program: +.Pp +.Bd -literal -offset indent +{ printf \*q hello \*q ; printf \*q world\\n" ; } \*[Gt] greeting +.Ed +.Pp +Note that +.Dq } +must follow a control operator (here, +.Dq \&; ) +so that it is recognized as a reserved word and not as another command argument. +.Ss Functions +The syntax of a function definition is +.Pp +.Dl name ( ) command +.Pp +A function definition is an executable statement; when executed it +installs a function named name and returns an exit status of zero. +The command is normally a list enclosed between +.Dq { +and +.Dq } . +.Pp +Variables may be declared to be local to a function by using a local +command. +This should appear as the first statement of a function, and the syntax is +.Pp +.Dl local [ variable | - ] ... +.Pp +Local is implemented as a builtin command. +.Pp +When a variable is made local, it inherits the initial value and exported +and readonly flags from the variable with the same name in the surrounding +scope, if there is one. +Otherwise, the variable is initially unset. +The shell uses dynamic scoping, so that if you make the variable x local to +function f, which then calls function g, references to the variable x made +inside g will refer to the variable x declared inside f, not to the global +variable named x. +.Pp +The only special parameter that can be made local is +.Dq - . +Making +.Dq - +local any shell options that are changed via the set command inside the +function to be restored to their original values when the function +returns. +.Pp +The syntax of the return command is +.Pp +.Dl return [ exitstatus ] +.Pp +It terminates the currently executing function. +Return is implemented as a builtin command. +.Ss Variables and Parameters +The shell maintains a set of parameters. +A parameter denoted by a name is called a variable. +When starting up, the shell turns all the environment +variables into shell variables. +New variables can be set using the form +.Pp +.Dl name=value +.Pp +Variables set by the user must have a name consisting solely of +alphabetics, numerics, and underscores - the first of which must not be +numeric. +A parameter can also be denoted by a number or a special +character as explained below. +.Ss Positional Parameters +A positional parameter is a parameter denoted by a number (n \*[Gt] 0). +The shell sets these initially to the values of its command line arguments +that follow the name of the shell script. +The +.Ic set +builtin can also be used to set or reset them. +.Ss Special Parameters +A special parameter is a parameter denoted by one of the following special +characters. +The value of the parameter is listed next to its character. +.Bl -tag -width thinhyphena +.It * +Expands to the positional parameters, starting from one. +When the +expansion occurs within a double-quoted string it expands to a single +field with the value of each parameter separated by the first character of +the +.Ev IFS +variable, or by a +.Aq space +if +.Ev IFS +is unset. +.It @ +Expands to the positional parameters, starting from one. +When the expansion occurs within double-quotes, each positional +parameter expands as a separate argument. +If there are no positional parameters, the +expansion of @ generates zero arguments, even when @ is +double-quoted. +What this basically means, for example, is +if $1 is +.Dq abc +and $2 is +.Dq def ghi , +then +.Qq $@ +expands to +the two arguments: +.Pp +.Sm off +.Dl \*q abc \*q \ \*q def\ ghi \*q +.Sm on +.It # +Expands to the number of positional parameters. +.It ? +Expands to the exit status of the most recent pipeline. +.It - (Hyphen.) +Expands to the current option flags (the single-letter +option names concatenated into a string) as specified on +invocation, by the set builtin command, or implicitly +by the shell. +.It $ +Expands to the process ID of the invoked shell. +A subshell retains the same value of $ as its parent. +.It ! +Expands to the process ID of the most recent background +command executed from the current shell. +For a pipeline, the process ID is that of the last command in the pipeline. +.It 0 (Zero.) +Expands to the name of the shell or shell script. +.El +.Ss Word Expansions +This clause describes the various expansions that are performed on words. +Not all expansions are performed on every word, as explained later. +.Pp +Tilde expansions, parameter expansions, command substitutions, arithmetic +expansions, and quote removals that occur within a single word expand to a +single field. +It is only field splitting or pathname expansion that can +create multiple fields from a single word. +The single exception to this +rule is the expansion of the special parameter @ within double-quotes, as +was described above. +.Pp +The order of word expansion is: +.Bl -enum +.It +Tilde Expansion, Parameter Expansion, Command Substitution, +Arithmetic Expansion (these all occur at the same time). +.It +Field Splitting is performed on fields +generated by step (1) unless the +.Ev IFS +variable is null. +.It +Pathname Expansion (unless set +.Fl f +is in effect). +.It +Quote Removal. +.El +.Pp +The $ character is used to introduce parameter expansion, command +substitution, or arithmetic evaluation. +.Ss Tilde Expansion (substituting a user's home directory) +A word beginning with an unquoted tilde character (~) is +subjected to tilde expansion. +All the characters up to +a slash (/) or the end of the word are treated as a username +and are replaced with the user's home directory. +If the username is missing (as in +.Pa ~/foobar ) , +the tilde is replaced with the value of the +.Va HOME +variable (the current user's home directory). +.Ss Parameter Expansion +The format for parameter expansion is as follows: +.Pp +.Dl ${expression} +.Pp +where expression consists of all characters until the matching +.Dq } . +Any +.Dq } +escaped by a backslash or within a quoted string, and characters in +embedded arithmetic expansions, command substitutions, and variable +expansions, are not examined in determining the matching +.Dq } . +.Pp +The simplest form for parameter expansion is: +.Pp +.Dl ${parameter} +.Pp +The value, if any, of parameter is substituted. +.Pp +The parameter name or symbol can be enclosed in braces, which are +optional except for positional parameters with more than one digit or +when parameter is followed by a character that could be interpreted as +part of the name. +If a parameter expansion occurs inside double-quotes: +.Bl -enum +.It +Pathname expansion is not performed on the results of the expansion. +.It +Field splitting is not performed on the results of the +expansion, with the exception of @. +.El +.Pp +In addition, a parameter expansion can be modified by using one of the +following formats. +.Bl -tag -width aaparameterwordaaaaa +.It ${parameter:-word} +Use Default Values. +If parameter is unset or null, the expansion of word +is substituted; otherwise, the value of parameter is substituted. +.It ${parameter:=word} +Assign Default Values. +If parameter is unset or null, the expansion of +word is assigned to parameter. +In all cases, the final value of parameter is substituted. +Only variables, not positional parameters or special +parameters, can be assigned in this way. +.It ${parameter:?[word]} +Indicate Error if Null or Unset. +If parameter is unset or null, the +expansion of word (or a message indicating it is unset if word is omitted) +is written to standard error and the shell exits with a nonzero exit status. +Otherwise, the value of parameter is substituted. +An interactive shell need not exit. +.It ${parameter:+word} +Use Alternative Value. +If parameter is unset or null, null is +substituted; otherwise, the expansion of word is substituted. +.El +.Pp +In the parameter expansions shown previously, use of the colon in the +format results in a test for a parameter that is unset or null; omission +of the colon results in a test for a parameter that is only unset. +.Bl -tag -width aaparameterwordaaaaa +.It ${#parameter} +String Length. +The length in characters of the value of parameter. +.El +.Pp +The following four varieties of parameter expansion provide for substring +processing. +In each case, pattern matching notation (see +.Sx Shell Patterns ) , +rather than regular expression notation, is used to evaluate the patterns. +If parameter is * or @, the result of the expansion is unspecified. +Enclosing the full parameter expansion string in double-quotes does not +cause the following four varieties of pattern characters to be quoted, +whereas quoting characters within the braces has this effect. +.Bl -tag -width aaparameterwordaaaaa +.It ${parameter%word} +Remove Smallest Suffix Pattern. +The word is expanded to produce a pattern. +The parameter expansion then results in parameter, with the +smallest portion of the suffix matched by the pattern deleted. +.It ${parameter%%word} +Remove Largest Suffix Pattern. +The word is expanded to produce a pattern. +The parameter expansion then results in parameter, with the largest +portion of the suffix matched by the pattern deleted. +.It ${parameter#word} +Remove Smallest Prefix Pattern. +The word is expanded to produce a pattern. +The parameter expansion then results in parameter, with the +smallest portion of the prefix matched by the pattern deleted. +.It ${parameter##word} +Remove Largest Prefix Pattern. +The word is expanded to produce a pattern. +The parameter expansion then results in parameter, with the largest +portion of the prefix matched by the pattern deleted. +.El +.Ss Command Substitution +Command substitution allows the output of a command to be substituted in +place of the command name itself. +Command substitution occurs when the command is enclosed as follows: +.Pp +.Dl $(command) +.Pp +or +.Po +.Dq backquoted +version +.Pc : +.Pp +.Dl `command` +.Pp +The shell expands the command substitution by executing command in a +subshell environment and replacing the command substitution with the +standard output of the command, removing sequences of one or more +.Ao newline Ac Ns s +at the end of the substitution. +(Embedded +.Ao newline Ac Ns s +before +the end of the output are not removed; however, during field splitting, +they may be translated into +.Ao space Ac Ns s , +depending on the value of +.Ev IFS +and quoting that is in effect.) +.Ss Arithmetic Expansion +Arithmetic expansion provides a mechanism for evaluating an arithmetic +expression and substituting its value. +The format for arithmetic expansion is as follows: +.Pp +.Dl $((expression)) +.Pp +The expression is treated as if it were in double-quotes, except +that a double-quote inside the expression is not treated specially. +The shell expands all tokens in the expression for parameter expansion, +command substitution, and quote removal. +.Pp +Next, the shell treats this as an arithmetic expression and +substitutes the value of the expression. +.Ss White Space Splitting (Field Splitting) +After parameter expansion, command substitution, and +arithmetic expansion the shell scans the results of +expansions and substitutions that did not occur in double-quotes for +field splitting and multiple fields can result. +.Pp +The shell treats each character of the +.Ev IFS +as a delimiter and uses the delimiters to split the results of parameter +expansion and command substitution into fields. +.Ss Pathname Expansion (File Name Generation) +Unless the +.Fl f +flag is set, file name generation is performed after word splitting is +complete. +Each word is viewed as a series of patterns, separated by slashes. +The process of expansion replaces the word with the names of all +existing files whose names can be formed by replacing each pattern with a +string that matches the specified pattern. +There are two restrictions on +this: first, a pattern cannot match a string containing a slash, and +second, a pattern cannot match a string starting with a period unless the +first character of the pattern is a period. +The next section describes the +patterns used for both Pathname Expansion and the +.Ic case +command. +.Ss Shell Patterns +A pattern consists of normal characters, which match themselves, +and meta-characters. +The meta-characters are +.Dq \&! , +.Dq * , +.Dq \&? , +and +.Dq \&[ . +These characters lose their special meanings if they are quoted. +When command or variable substitution is performed +and the dollar sign or back quotes are not double quoted, +the value of the variable or the output of +the command is scanned for these characters and they are turned into +meta-characters. +.Pp +An asterisk +.Pq Dq * +matches any string of characters. +A question mark matches any single character. +A left bracket +.Pq Dq \&[ +introduces a character class. +The end of the character class is indicated by a +.Pq Dq \&] ; +if the +.Dq \&] +is missing then the +.Dq \&[ +matches a +.Dq \&[ +rather than introducing a character class. +A character class matches any of the characters between the square brackets. +A range of characters may be specified using a minus sign. +The character class may be complemented +by making an exclamation point the first character of the character class. +.Pp +To include a +.Dq \&] +in a character class, make it the first character listed (after the +.Dq \&! , +if any). +To include a minus sign, make it the first or last character listed. +.Ss Builtins +This section lists the builtin commands which are builtin because they +need to perform some operation that can't be performed by a separate +process. +In addition to these, there are several other commands that may +be builtin for efficiency (e.g. +.Xr printf 1 , +.Xr echo 1 , +.Xr test 1 , +etc). +.Bl -tag -width 5n +.It : +.It true +A null command that returns a 0 (true) exit value. +.It \&. file +The commands in the specified file are read and executed by the shell. +.It alias Op Ar name Ns Op Ar "=string ..." +If +.Ar name=string +is specified, the shell defines the alias +.Ar name +with value +.Ar string . +If just +.Ar name +is specified, the value of the alias +.Ar name +is printed. +With no arguments, the +.Ic alias +builtin prints the +names and values of all defined aliases (see +.Ic unalias ) . +.It bg [ Ar job ] ... +Continue the specified jobs (or the current job if no +jobs are given) in the background. +.It Xo command +.Op Fl p +.Op Fl v +.Op Fl V +.Ar command +.Op Ar arg ... +.Xc +Execute the specified command but ignore shell functions when searching +for it. +(This is useful when you +have a shell function with the same name as a builtin command.) +.Bl -tag -width 5n +.It Fl p +search for command using a +.Ev PATH +that guarantees to find all the standard utilities. +.It Fl V +Do not execute the command but +search for the command and print the resolution of the +command search. +This is the same as the type builtin. +.It Fl v +Do not execute the command but +search for the command and print the absolute pathname +of utilities, the name for builtins or the expansion of aliases. +.El +.It cd Ar - +.It Xo cd Op Fl LP +.Op Ar directory +.Xc +Switch to the specified directory (default +.Ev HOME ) . +If an entry for +.Ev CDPATH +appears in the environment of the +.Ic cd +command or the shell variable +.Ev CDPATH +is set and the directory name does not begin with a slash, then the +directories listed in +.Ev CDPATH +will be searched for the specified directory. +The format of +.Ev CDPATH +is the same as that of +.Ev PATH . +If a single dash is specified as the argument, it will be replaced by the +value of +.Ev OLDPWD . +The +.Ic cd +command will print out the name of the +directory that it actually switched to if this is different from the name +that the user gave. +These may be different either because the +.Ev CDPATH +mechanism was used or because the argument is a single dash. +The +.Fl P +option causes the physical directory structure to be used, that is, all +symbolic links are resolved to their respective values. The +.Fl L +option turns off the effect of any preceding +.Fl P +options. +.It Xo echo Op Fl n +.Ar args... +.Xc +Print the arguments on the standard output, separated by spaces. +Unless the +.Fl n +option is present, a newline is output following the arguments. +.Pp +If any of the following sequences of characters is encountered during +output, the sequence is not output. Instead, the specified action is +performed: +.Bl -tag -width indent +.It Li \eb +A backspace character is output. +.It Li \ec +Subsequent output is suppressed. This is normally used at the end of the +last argument to suppress the trailing newline that +.Ic echo +would otherwise output. +.It Li \ef +Output a form feed. +.It Li \en +Output a newline character. +.It Li \er +Output a carriage return. +.It Li \et +Output a (horizontal) tab character. +.It Li \ev +Output a vertical tab. +.It Li \e0 Ns Ar digits +Output the character whose value is given by zero to three octal digits. +If there are zero digits, a nul character is output. +.It Li \e\e +Output a backslash. +.El +.Pp +All other backslash sequences elicit undefined behaviour. +.It eval Ar string ... +Concatenate all the arguments with spaces. +Then re-parse and execute the command. +.It exec Op Ar command arg ... +Unless command is omitted, the shell process is replaced with the +specified program (which must be a real program, not a shell builtin or +function). +Any redirections on the +.Ic exec +command are marked as permanent, so that they are not undone when the +.Ic exec +command finishes. +.It exit Op Ar exitstatus +Terminate the shell process. +If +.Ar exitstatus +is given it is used as the exit status of the shell; otherwise the +exit status of the preceding command is used. +.It export Ar name ... +.It export Fl p +The specified names are exported so that they will appear in the +environment of subsequent commands. +The only way to un-export a variable is to unset it. +The shell allows the value of a variable to be set at the +same time it is exported by writing +.Pp +.Dl export name=value +.Pp +With no arguments the export command lists the names of all exported variables. +With the +.Fl p +option specified the output will be formatted suitably for non-interactive use. +.It Xo fc Op Fl e Ar editor +.Op Ar first Op Ar last +.Xc +.It Xo fc Fl l +.Op Fl nr +.Op Ar first Op Ar last +.Xc +.It Xo fc Fl s Op Ar old=new +.Op Ar first +.Xc +The +.Ic fc +builtin lists, or edits and re-executes, commands previously entered +to an interactive shell. +.Bl -tag -width 5n +.It Fl e No editor +Use the editor named by editor to edit the commands. +The editor string is a command name, subject to search via the +.Ev PATH +variable. +The value in the +.Ev FCEDIT +variable is used as a default when +.Fl e +is not specified. +If +.Ev FCEDIT +is null or unset, the value of the +.Ev EDITOR +variable is used. +If +.Ev EDITOR +is null or unset, +.Xr ed 1 +is used as the editor. +.It Fl l No (ell) +List the commands rather than invoking an editor on them. +The commands are written in the sequence indicated by +the first and last operands, as affected by +.Fl r , +with each command preceded by the command number. +.It Fl n +Suppress command numbers when listing with -l. +.It Fl r +Reverse the order of the commands listed (with +.Fl l ) +or edited (with neither +.Fl l +nor +.Fl s ) . +.It Fl s +Re-execute the command without invoking an editor. +.It first +.It last +Select the commands to list or edit. +The number of previous commands that +can be accessed are determined by the value of the +.Ev HISTSIZE +variable. +The value of first or last or both are one of the following: +.Bl -tag -width 5n +.It [+]number +A positive number representing a command number; command numbers can be +displayed with the +.Fl l +option. +.It Fl number +A negative decimal number representing the command that was executed +number of commands previously. +For example, \-1 is the immediately previous command. +.El +.It string +A string indicating the most recently entered command that begins with +that string. +If the old=new operand is not also specified with +.Fl s , +the string form of the first operand cannot contain an embedded equal sign. +.El +.Pp +The following environment variables affect the execution of fc: +.Bl -tag -width HISTSIZE +.It Ev FCEDIT +Name of the editor to use. +.It Ev HISTSIZE +The number of previous commands that are accessible. +.El +.It fg Op Ar job +Move the specified job or the current job to the foreground. +.It getopts Ar optstring var +The +.Tn POSIX +.Ic getopts +command, not to be confused with the +.Em Bell Labs +-derived +.Xr getopt 1 . +.Pp +The first argument should be a series of letters, each of which may be +optionally followed by a colon to indicate that the option requires an +argument. +The variable specified is set to the parsed option. +.Pp +The +.Ic getopts +command deprecates the older +.Xr getopt 1 +utility due to its handling of arguments containing whitespace. +.Pp +The +.Ic getopts +builtin may be used to obtain options and their arguments +from a list of parameters. +When invoked, +.Ic getopts +places the value of the next option from the option string in the list in +the shell variable specified by +.Va var +and its index in the shell variable +.Ev OPTIND . +When the shell is invoked, +.Ev OPTIND +is initialized to 1. +For each option that requires an argument, the +.Ic getopts +builtin will place it in the shell variable +.Ev OPTARG . +If an option is not allowed for in the +.Va optstring , +then +.Ev OPTARG +will be unset. +.Pp +.Va optstring +is a string of recognized option letters (see +.Xr getopt 3 ) . +If a letter is followed by a colon, the option is expected to have an +argument which may or may not be separated from it by white space. +If an option character is not found where expected, +.Ic getopts +will set the variable +.Va var +to a +.Dq \&? ; +.Ic getopts +will then unset +.Ev OPTARG +and write output to standard error. +By specifying a colon as the first character of +.Va optstring +all errors will be ignored. +.Pp +A nonzero value is returned when the last option is reached. +If there are no remaining arguments, +.Ic getopts +will set +.Va var +to the special option, +.Dq -- , +otherwise, it will set +.Va var +to +.Dq \&? . +.Pp +The following code fragment shows how one might process the arguments +for a command that can take the options +.Op a +and +.Op b , +and the option +.Op c , +which requires an argument. +.Pp +.Bd -literal -offset indent +while getopts abc: f +do + case $f in + a | b) flag=$f;; + c) carg=$OPTARG;; + \\?) echo $USAGE; exit 1;; + esac +done +shift `expr $OPTIND - 1` +.Ed +.Pp +This code will accept any of the following as equivalent: +.Pp +.Bd -literal -offset indent +cmd \-acarg file file +cmd \-a \-c arg file file +cmd \-carg -a file file +cmd \-a \-carg \-\- file file +.Ed +.It hash Fl rv Ar command ... +The shell maintains a hash table which remembers the +locations of commands. +With no arguments whatsoever, +the +.Ic hash +command prints out the contents of this table. +Entries which have not been looked at since the last +.Ic cd +command are marked with an asterisk; it is possible for these entries +to be invalid. +.Pp +With arguments, the +.Ic hash +command removes the specified commands from the hash table (unless +they are functions) and then locates them. +With the +.Fl v +option, hash prints the locations of the commands as it finds them. +The +.Fl r +option causes the hash command to delete all the entries in the hash table +except for functions. +.It pwd Op Fl LP +builtin command remembers what the current directory +is rather than recomputing it each time. +This makes it faster. +However, if the current directory is renamed, the builtin version of +.Ic pwd +will continue to print the old name for the directory. +The +.Fl P +option causes the physical value of the current working directory to be shown, +that is, all symbolic links are resolved to their respective values. The +.Fl L +option turns off the effect of any preceding +.Fl P +options. +.It Xo read Op Fl p Ar prompt +.Op Fl r +.Ar variable +.Op Ar ... +.Xc +The prompt is printed if the +.Fl p +option is specified and the standard input is a terminal. +Then a line is read from the standard input. +The trailing newline is deleted from the +line and the line is split as described in the section on word splitting +above, and the pieces are assigned to the variables in order. +At least one variable must be specified. +If there are more pieces than variables, the remaining pieces +(along with the characters in +.Ev IFS +that separated them) are assigned to the last variable. +If there are more variables than pieces, +the remaining variables are assigned the null string. +The +.Ic read +builtin will indicate success unless EOF is encountered on input, in +which case failure is returned. +.Pp +By default, unless the +.Fl r +option is specified, the backslash +.Dq \e +acts as an escape character, causing the following character to be treated +literally. +If a backslash is followed by a newline, the backslash and the +newline will be deleted. +.It readonly Ar name ... +.It readonly Fl p +The specified names are marked as read only, so that they cannot be +subsequently modified or unset. +The shell allows the value of a variable +to be set at the same time it is marked read only by writing +.Pp +.Dl readonly name=value +.Pp +With no arguments the readonly command lists the names of all read only +variables. +With the +.Fl p +option specified the output will be formatted suitably for non-interactive use. +.Pp +.It Xo printf Ar format +.Op Ar arguments ... +.Xc +.Ic printf +formats and prints its arguments, after the first, under control +of the +.Ar format . +The +.Ar format +is a character string which contains three types of objects: plain characters, +which are simply copied to standard output, character escape sequences which +are converted and copied to the standard output, and format specifications, +each of which causes printing of the next successive +.Ar argument . +.Pp +The +.Ar arguments +after the first are treated as strings if the corresponding format is +either +.Cm b , +.Cm c +or +.Cm s ; +otherwise it is evaluated as a C constant, with the following extensions: +.Pp +.Bl -bullet -offset indent -compact +.It +A leading plus or minus sign is allowed. +.It +If the leading character is a single or double quote, the value is the +.Tn ASCII +code of the next character. +.El +.Pp +The format string is reused as often as necessary to satisfy the +.Ar arguments . +Any extra format specifications are evaluated with zero or the null +string. +.Pp +Character escape sequences are in backslash notation as defined in +.St -ansiC . +The characters and their meanings are as follows: +.Bl -tag -width Ds -offset indent +.It Cm \ea +Write a \*[Lt]bell\*[Gt] character. +.It Cm \eb +Write a \*[Lt]backspace\*[Gt] character. +.It Cm \ef +Write a \*[Lt]form-feed\*[Gt] character. +.It Cm \en +Write a \*[Lt]new-line\*[Gt] character. +.It Cm \er +Write a \*[Lt]carriage return\*[Gt] character. +.It Cm \et +Write a \*[Lt]tab\*[Gt] character. +.It Cm \ev +Write a \*[Lt]vertical tab\*[Gt] character. +.It Cm \e\e +Write a backslash character. +.It Cm \e Ns Ar num +Write an 8\-bit character whose +.Tn ASCII +value is the 1\-, 2\-, or 3\-digit +octal number +.Ar num . +.El +.Pp +Each format specification is introduced by the percent character +(``%''). +The remainder of the format specification includes, +in the following order: +.Bl -tag -width Ds +.It "Zero or more of the following flags:" +.Bl -tag -width Ds +.It Cm # +A `#' character +specifying that the value should be printed in an ``alternative form''. +For +.Cm b , +.Cm c , +.Cm d , +and +.Cm s +formats, this option has no effect. +For the +.Cm o +format the precision of the number is increased to force the first +character of the output string to a zero. +For the +.Cm x +.Pq Cm X +format, a non-zero result has the string +.Li 0x +.Pq Li 0X +prepended to it. +For +.Cm e , +.Cm E , +.Cm f , +.Cm g , +and +.Cm G +formats, the result will always contain a decimal point, even if no +digits follow the point (normally, a decimal point only appears in the +results of those formats if a digit follows the decimal point). +For +.Cm g +and +.Cm G +formats, trailing zeros are not removed from the result as they +would otherwise be. +.It Cm \&\- +A minus sign `\-' which specifies +.Em left adjustment +of the output in the indicated field; +.It Cm \&+ +A `+' character specifying that there should always be +a sign placed before the number when using signed formats. +.It Sq \&\ \& +A space specifying that a blank should be left before a positive number +for a signed format. +A `+' overrides a space if both are used; +.It Cm \&0 +A zero `0' character indicating that zero-padding should be used +rather than blank-padding. +A `\-' overrides a `0' if both are used; +.El +.It "Field Width:" +An optional digit string specifying a +.Em field width ; +if the output string has fewer characters than the field width it will +be blank-padded on the left (or right, if the left-adjustment indicator +has been given) to make up the field width (note that a leading zero +is a flag, but an embedded zero is part of a field width); +.It Precision : +An optional period, +.Sq Cm \&.\& , +followed by an optional digit string giving a +.Em precision +which specifies the number of digits to appear after the decimal point, +for +.Cm e +and +.Cm f +formats, or the maximum number of characters to be printed +from a string +.Sm off +.Pf ( Cm b +.Sm on +and +.Cm s +formats); if the digit string is missing, the precision is treated +as zero; +.It Format : +A character which indicates the type of format to use (one of +.Cm diouxXfwEgGbcs ) . +.El +.Pp +A field width or precision may be +.Sq Cm \&* +instead of a digit string. +In this case an +.Ar argument +supplies the field width or precision. +.Pp +The format characters and their meanings are: +.Bl -tag -width Fl +.It Cm diouXx +The +.Ar argument +is printed as a signed decimal (d or i), unsigned octal, unsigned decimal, +or unsigned hexadecimal (X or x), respectively. +.It Cm f +The +.Ar argument +is printed in the style +.Sm off +.Pf [\-]ddd Cm \&. No ddd +.Sm on +where the number of d's +after the decimal point is equal to the precision specification for +the argument. +If the precision is missing, 6 digits are given; if the precision +is explicitly 0, no digits and no decimal point are printed. +.It Cm eE +The +.Ar argument +is printed in the style +.Sm off +.Pf [\-]d Cm \&. No ddd Cm e No \\*(Pmdd +.Sm on +where there +is one digit before the decimal point and the number after is equal to +the precision specification for the argument; when the precision is +missing, 6 digits are produced. +An upper-case E is used for an `E' format. +.It Cm gG +The +.Ar argument +is printed in style +.Cm f +or in style +.Cm e +.Pq Cm E +whichever gives full precision in minimum space. +.It Cm b +Characters from the string +.Ar argument +are printed with backslash-escape sequences expanded. +.br +The following additional backslash-escape sequences are supported: +.Bl -tag -width Ds +.It Cm \ec +Causes +.Nm +to ignore any remaining characters in the string operand containing it, +any remaining string operands, and any additional characters in +the format operand. +.It Cm \e0 Ns Ar num +Write an 8\-bit character whose +.Tn ASCII +value is the 1\-, 2\-, or 3\-digit +octal number +.Ar num . +.El +.It Cm c +The first character of +.Ar argument +is printed. +.It Cm s +Characters from the string +.Ar argument +are printed until the end is reached or until the number of characters +indicated by the precision specification is reached; if the +precision is omitted, all characters in the string are printed. +.It Cm \&% +Print a `%'; no argument is used. +.El +.Pp +In no case does a non-existent or small field width cause truncation of +a field; padding takes place only if the specified field width exceeds +the actual width. +.It Xo set +.Oo { +.Fl options | Cm +options | Cm -- } +.Oc Ar arg ... +.Xc +The +.Ic set +command performs three different functions. +.Pp +With no arguments, it lists the values of all shell variables. +.Pp +If options are given, it sets the specified option +flags, or clears them as described in the section called +.Sx Argument List Processing . +.Pp +The third use of the set command is to set the values of the shell's +positional parameters to the specified args. +To change the positional +parameters without changing any options, use +.Dq -- +as the first argument to set. +If no args are present, the set command +will clear all the positional parameters (equivalent to executing +.Dq shift $# . ) +.It shift Op Ar n +Shift the positional parameters n times. +A +.Ic shift +sets the value of +.Va $1 +to the value of +.Va $2 , +the value of +.Va $2 +to the value of +.Va $3 , +and so on, decreasing +the value of +.Va $# +by one. +If n is greater than the number of positional parameters, +.Ic shift +will issue an error message, and exit with return status 2. +.It test Ar expression +.It \&[ Ar expression Cm ] +The +.Ic test +utility evaluates the expression and, if it evaluates +to true, returns a zero (true) exit status; otherwise +it returns 1 (false). +If there is no expression, test also +returns 1 (false). +.Pp +All operators and flags are separate arguments to the +.Ic test +utility. +.Pp +The following primaries are used to construct expression: +.Bl -tag -width Ar +.It Fl b Ar file +True if +.Ar file +exists and is a block special +file. +.It Fl c Ar file +True if +.Ar file +exists and is a character +special file. +.It Fl d Ar file +True if +.Ar file +exists and is a directory. +.It Fl e Ar file +True if +.Ar file +exists (regardless of type). +.It Fl f Ar file +True if +.Ar file +exists and is a regular file. +.It Fl g Ar file +True if +.Ar file +exists and its set group ID flag +is set. +.It Fl h Ar file +True if +.Ar file +exists and is a symbolic link. +.It Fl k Ar file +True if +.Ar file +exists and its sticky bit is set. +.It Fl n Ar string +True if the length of +.Ar string +is nonzero. +.It Fl p Ar file +True if +.Ar file +is a named pipe +.Po Tn FIFO Pc . +.It Fl r Ar file +True if +.Ar file +exists and is readable. +.It Fl s Ar file +True if +.Ar file +exists and has a size greater +than zero. +.It Fl t Ar file_descriptor +True if the file whose file descriptor number +is +.Ar file_descriptor +is open and is associated with a terminal. +.It Fl u Ar file +True if +.Ar file +exists and its set user ID flag +is set. +.It Fl w Ar file +True if +.Ar file +exists and is writable. +True +indicates only that the write flag is on. +The file is not writable on a read-only file +system even if this test indicates true. +.It Fl x Ar file +True if +.Ar file +exists and is executable. +True +indicates only that the execute flag is on. +If +.Ar file +is a directory, true indicates that +.Ar file +can be searched. +.It Fl z Ar string +True if the length of +.Ar string +is zero. +.It Fl L Ar file +True if +.Ar file +exists and is a symbolic link. +This operator is retained for compatibility with previous versions of +this program. +Do not rely on its existence; use +.Fl h +instead. +.It Fl O Ar file +True if +.Ar file +exists and its owner matches the effective user id of this process. +.It Fl G Ar file +True if +.Ar file +exists and its group matches the effective group id of this process. +.It Fl S Ar file +True if +.Ar file +exists and is a socket. +.It Ar file1 Fl nt Ar file2 +True if +.Ar file1 +exists and is newer than +.Ar file2 . +.It Ar file1 Fl ot Ar file2 +True if +.Ar file1 +exists and is older than +.Ar file2 . +.It Ar file1 Fl ef Ar file2 +True if +.Ar file1 +and +.Ar file2 +exist and refer to the same file. +.It Ar string +True if +.Ar string +is not the null +string. +.It Ar \&s\&1 Cm \&= Ar \&s\&2 +True if the strings +.Ar \&s\&1 +and +.Ar \&s\&2 +are identical. +.It Ar \&s\&1 Cm \&!= Ar \&s\&2 +True if the strings +.Ar \&s\&1 +and +.Ar \&s\&2 +are not identical. +.It Ar \&s\&1 Cm \&\*[Lt] Ar \&s\&2 +True if string +.Ar \&s\&1 +comes before +.Ar \&s\&2 +based on the ASCII value of their characters. +.It Ar \&s\&1 Cm \&\*[Gt] Ar \&s\&2 +True if string +.Ar \&s\&1 +comes after +.Ar \&s\&2 +based on the ASCII value of their characters. +.It Ar \&n\&1 Fl \&eq Ar \&n\&2 +True if the integers +.Ar \&n\&1 +and +.Ar \&n\&2 +are algebraically +equal. +.It Ar \&n\&1 Fl \&ne Ar \&n\&2 +True if the integers +.Ar \&n\&1 +and +.Ar \&n\&2 +are not +algebraically equal. +.It Ar \&n\&1 Fl \> Ar \&n\&2 +True if the integer +.Ar \&n\&1 +is algebraically +greater than the integer +.Ar \&n\&2 . +.It Ar \&n\&1 Fl \&ge Ar \&n\&2 +True if the integer +.Ar \&n\&1 +is algebraically +greater than or equal to the integer +.Ar \&n\&2 . +.It Ar \&n\&1 Fl \< Ar \&n\&2 +True if the integer +.Ar \&n\&1 +is algebraically less +than the integer +.Ar \&n\&2 . +.It Ar \&n\&1 Fl \&le Ar \&n\&2 +True if the integer +.Ar \&n\&1 +is algebraically less +than or equal to the integer +.Ar \&n\&2 . +.El +.Pp +These primaries can be combined with the following operators: +.Bl -tag -width Ar +.It Cm \&! Ar expression +True if +.Ar expression +is false. +.It Ar expression1 Fl a Ar expression2 +True if both +.Ar expression1 +and +.Ar expression2 +are true. +.It Ar expression1 Fl o Ar expression2 +True if either +.Ar expression1 +or +.Ar expression2 +are true. +.It Cm \&( Ns Ar expression Ns Cm \&) +True if expression is true. +.El +.Pp +The +.Fl a +operator has higher precedence than the +.Fl o +operator. +.It times +Print the accumulated user and system times for the shell and for processes +run from the shell. The return status is 0. +.It Xo trap +.Op Ar action Ar signal ... +.Xc +Cause the shell to parse and execute action when any of the specified +signals are received. +The signals are specified by signal number or as the name of the signal. +If +.Ar signal +is +.Li 0 , +the action is executed when the shell exits. +.Ar action +may be null, which cause the specified signals to be ignored. +With +.Ar action +omitted or set to `-' the specified signals are set to their default action. +When the shell forks off a subshell, it resets trapped (but not ignored) +signals to the default action. +The +.Ic trap +command has no effect on signals that were +ignored on entry to the shell. +.Ic trap +without any arguments cause it to write a list of signals and their +associated action to the standard output in a format that is suitable +as an input to the shell that achieves the same trapping results. +.Pp +Examples: +.Pp +.Dl trap +.Pp +List trapped signals and their corresponding action +.Pp +.Dl trap '' INT QUIT tstp 30 +.Pp +Ignore signals INT QUIT TSTP USR1 +.Pp +.Dl trap date INT +.Pp +Print date upon receiving signal INT +.It type Op Ar name ... +Interpret each name as a command and print the resolution of the command +search. +Possible resolutions are: +shell keyword, alias, shell builtin, +command, tracked alias and not found. +For aliases the alias expansion is +printed; for commands and tracked aliases the complete pathname of the +command is printed. +.It ulimit Xo +.Op Fl H \*(Ba Fl S +.Op Fl a \*(Ba Fl tfdscmlpn Op Ar value +.Xc +Inquire about or set the hard or soft limits on processes or set new +limits. +The choice between hard limit (which no process is allowed to +violate, and which may not be raised once it has been lowered) and soft +limit (which causes processes to be signaled but not necessarily killed, +and which may be raised) is made with these flags: +.Bl -tag -width Fl +.It Fl H +set or inquire about hard limits +.It Fl S +set or inquire about soft limits. +If neither +.Fl H +nor +.Fl S +is specified, the soft limit is displayed or both limits are set. +If both are specified, the last one wins. +.El +.Pp +.Bl -tag -width Fl +The limit to be interrogated or set, then, is chosen by specifying +any one of these flags: +.It Fl a +show all the current limits +.It Fl t +show or set the limit on CPU time (in seconds) +.It Fl f +show or set the limit on the largest file that can be created +(in 512-byte blocks) +.It Fl d +show or set the limit on the data segment size of a process (in kilobytes) +.It Fl s +show or set the limit on the stack size of a process (in kilobytes) +.It Fl c +show or set the limit on the largest core dump size that can be produced +(in 512-byte blocks) +.It Fl m +show or set the limit on the total physical memory that can be +in use by a process (in kilobytes) +.It Fl l +show or set the limit on how much memory a process can lock with +.Xr mlock 2 +(in kilobytes) +.It Fl p +show or set the limit on the number of processes this user can +have at one time +.It Fl n +show or set the limit on the number files a process can have open at once +.El +.Pp +If none of these is specified, it is the limit on file size that is shown +or set. +If value is specified, the limit is set to that number; otherwise +the current limit is displayed. +.Pp +Limits of an arbitrary process can be displayed or set using the +.Xr sysctl 8 +utility. +.Pp +.It umask Op Ar mask +Set the value of umask (see +.Xr umask 2 ) +to the specified octal value. +If the argument is omitted, the umask value is printed. +.It unalias Xo +.Op Fl a +.Op Ar name +.Xc +If +.Ar name +is specified, the shell removes that alias. +If +.Fl a +is specified, all aliases are removed. +.It unset Xo +.Op Fl fv +.Ar name ... +.Xc +The specified variables and functions are unset and unexported. +If +.Fl f +or +.Fl v +is specified, the corresponding function or variable is unset, respectively. +If a given name corresponds to both a variable and a function, and no +options are given, only the variable is unset. +.It wait Op Ar job +Wait for the specified job to complete and return the exit status of the +last process in the job. +If the argument is omitted, wait for all jobs to +complete and the return an exit status of zero. +.El +.Ss Command Line Editing +When +.Nm +is being used interactively from a terminal, the current command +and the command history (see +.Ic fc +in +.Sx Builtins ) +can be edited using vi-mode command-line editing. +This mode uses commands, described below, +similar to a subset of those described in the vi man page. +The command +.Ql set -o vi +enables vi-mode editing and place sh into vi insert mode. +With vi-mode +enabled, sh can be switched between insert mode and command mode. +The editor is not described in full here, but will be in a later document. +It's similar to vi: typing +.Aq ESC +will throw you into command VI command mode. +Hitting +.Aq return +while in command mode will pass the line to the shell. +.Sh EXIT STATUS +Errors that are detected by the shell, such as a syntax error, will cause the +shell to exit with a non-zero exit status. +If the shell is not an +interactive shell, the execution of the shell file will be aborted. +Otherwise +the shell will return the exit status of the last command executed, or +if the exit builtin is used with a numeric argument, it will return the +argument. +.Sh ENVIRONMENT +.Bl -tag -width MAILCHECK +.It Ev HOME +Set automatically by +.Xr login 1 +from the user's login directory in the password file +.Pq Xr passwd 4 . +This environment variable also functions as the default argument for the +cd builtin. +.It Ev PATH +The default search path for executables. +See the above section +.Sx Path Search . +.It Ev CDPATH +The search path used with the cd builtin. +.It Ev MAIL +The name of a mail file, that will be checked for the arrival of new mail. +Overridden by +.Ev MAILPATH . +.It Ev MAILCHECK +The frequency in seconds that the shell checks for the arrival of mail +in the files specified by the +.Ev MAILPATH +or the +.Ev MAIL +file. +If set to 0, the check will occur at each prompt. +.It Ev MAILPATH +A colon +.Dq \&: +separated list of file names, for the shell to check for incoming mail. +This environment setting overrides the +.Ev MAIL +setting. +There is a maximum of 10 mailboxes that can be monitored at once. +.It Ev PS1 +The primary prompt string, which defaults to +.Dq $ \ , +unless you are the superuser, in which case it defaults to +.Dq # \ . +.It Ev PS2 +The secondary prompt string, which defaults to +.Dq \*[Gt] \ . +.It Ev PS4 +Output before each line when execution trace (set -x) is enabled, +defaults to +.Dq + \ . +.It Ev IFS +Input Field Separators. +This is normally set to +.Aq space , +.Aq tab , +and +.Aq newline . +See the +.Sx White Space Splitting +section for more details. +.It Ev TERM +The default terminal setting for the shell. +This is inherited by +children of the shell, and is used in the history editing modes. +.It Ev HISTSIZE +The number of lines in the history buffer for the shell. +.It Ev PWD +The logical value of the current working directory. This is set by the +.Ic cd +command. +.It Ev OLDPWD +The previous logical value of the current working directory. This is set by +the +.Ic cd +command. +.It Ev PPID +The process ID of the parent process of the shell. +.El +.Sh FILES +.Bl -item -width HOMEprofilexxxx +.It +.Pa $HOME/.profile +.It +.Pa /etc/profile +.El +.Sh SEE ALSO +.Xr csh 1 , +.Xr echo 1 , +.Xr getopt 1 , +.Xr ksh 1 , +.Xr login 1 , +.Xr printf 1 , +.Xr test 1 , +.Xr getopt 3 , +.Xr passwd 5 , +.\" .Xr profile 4 , +.Xr environ 7 , +.Xr sysctl 8 +.Sh HISTORY +A +.Nm +command appeared in +.At v1 . +It was, however, unmaintainable so we wrote this one. +.Sh BUGS +Setuid shell scripts should be avoided at all costs, as they are a +significant security risk. +.Pp +PS1, PS2, and PS4 should be subject to parameter expansion before +being displayed. |