Adding upstream version 2.4.120.upstream/2.4.120

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

21 files changed, 15758 insertions, 0 deletions

diff --git a/include/drm/README b/include/drm/README
new file mode 100644
index 0000000..ea2320c
--- /dev/null
+++ b/include/drm/README
@@ -0,0 +1,128 @@
+What are these headers ?
+------------------------
+This is the canonical source of drm headers that user space should use for
+communicating with the kernel DRM subsystem.
+
+They flow from the kernel, thus any changes must be merged there first.
+Do _not_ attempt to "fix" these by deviating from the kernel ones !
+
+
+Non-linux platforms - changes/patches
+-------------------------------------
+If your platform has local changes, please send them upstream for inclusion.
+Even if your patches don't get accepted in their current form, devs will
+give you feedback on how to address things properly.
+
+git send-email --subject-prefix="PATCH libdrm" your patches to dri-devel
+mailing list.
+
+Before doing so, please consider the following:
+ - Have the [libdrm vs kernel] headers on your platform deviated ?
+Consider unifying them first.
+
+ - Have you introduced additional ABI that's not available in Linux ?
+Propose it for [Linux kernel] upstream inclusion.
+If that doesn't work out (hopefully it never does), move it to another header
+and/or keep the change(s) local ?
+
+ - Are your changes DRI1/UMS specific ?
+There is virtually no interest/power in keeping those legacy interfaces. They
+are around due to the kernel "thou shalt not break existing user space" rule.
+
+Consider porting the driver to DRI2/KMS - all (almost?) sensible hardware is
+capable of supporting those.
+
+
+Which headers go where ?
+------------------------
+A snipped from the, now removed, Makefile.am used to state:
+
+  XXX airlied says, nothing besides *_drm.h and drm*.h should be necessary.
+  however, r300 and via need their reg headers installed in order to build.
+  better solutions are welcome.
+
+Obviously the r300 and via headers are no longer around ;-)
+
+Reason behind is that the drm headers can be used as a basic communications
+channel with the respective kernel modules. If more advanced functionality is
+required one can pull the specific libdrm_$driver which is free to pull
+additional files from the kernel.
+
+For example: nouveau has nouveau/nvif/*.h while vc4 has vc4/*.h
+
+If your driver is still in prototyping/staging state, consider moving the
+$driver_drm.h into $driver and _not_ installing it. An header providing opaque
+definitions and access [via $driver_drmif.h or similar] would be better fit.
+
+
+When and which headers to update
+--------------------------------
+Ideally all files will be synced (updated) with the latest released kernel on
+each libdrm release. Sadly that's not yet possible since quite a few headers
+differ significantly - see Outdated or Broken Headers section below.
+
+That said, it's up-to the individual developers to sync with newer version
+(from drm-next) as they see fit.
+
+
+When and how to update these files
+----------------------------------
+Note: One should not do _any_ changes to the files apart from the steps below.
+
+In order to update the files do the following:
+ - Switch to a Linux kernel tree/branch which is not rebased.
+   For example: drm-next (https://cgit.freedesktop.org/drm/drm)
+ - Install the headers via `make headers_install' to a separate location.
+ - Copy the drm header[s] + git add + git commit.
+ - Note: Your commit message must include:
+   a) Brief summary on the delta. If there's any change that looks like an
+API/ABI break one _must_ explicitly state why it's safe to do so.
+   b) "Generated using make headers_install."
+   c) "Generated from $tree/branch commit $sha"
+
+
+Outdated or Broken Headers
+--------------------------
+This section contains a list of headers and the respective "issues" they might
+have relative to their kernel equivalent.
+
+Most UMS headers:
+ - Not using fixed size integers - compat ioctls are broken.
+Status: ?
+Promote to fixed size ints, which match the current (32bit) ones.
+
+nouveau_drm.h
+ - Missing macros NOUVEAU_GETPARAM*, NOUVEAU_DRM_HEADER_PATCHLEVEL, structs,
+enums
+Status: Deliberate UABI choice; nouveau hides the exact kernel ABI behind libdrm
+
+r128_drm.h
+ - Broken compat ioctls.
+
+radeon_drm.h
+ - Missing RADEON_TILING_R600_NO_SCANOUT, CIK_TILE_MODE_*, broken UMS ioctls
+ - Both kernel and libdrm: missing padding -
+drm_radeon_gem_{create,{g,s}et_tiling,set_domain} others ?
+Status: ?
+
+savage_drm.h
+ - Renamed ioctls - DRM_IOCTL_SAVAGE_{,BCI}_EVENT_EMIT, compat ioctls are broken.
+Status: ?
+
+sis_drm.h
+ - Borken ioctls + libdrm uses int vs kernel long
+Status: ?
+
+via_drm.h
+ - Borken ioctls - libdrm int vs kernel long
+Status: ?
+
+
+omap_drm.h (living in $TOP/omap)
+ - License mismatch, missing DRM_IOCTL_OMAP_GEM_NEW and related struct
+Status: ?
+
+exynos_drm.h (living in $TOP/exynos)
+ - License mismatch, now using fixed size ints (but not everywhere). Lots of
+new stuff.
+Status: ?
diff --git a/include/drm/amdgpu_drm.h b/include/drm/amdgpu_drm.h
new file mode 100644
index 0000000..ad21c61
--- /dev/null
+++ b/include/drm/amdgpu_drm.h
@@ -0,0 +1,1274 @@
+/* amdgpu_drm.h -- Public header for the amdgpu driver -*- linux-c -*-
+ *
+ * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Fremont, California.
+ * Copyright 2002 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * Copyright 2014 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Kevin E. Martin <martin@valinux.com>
+ *    Gareth Hughes <gareth@valinux.com>
+ *    Keith Whitwell <keith@tungstengraphics.com>
+ */
+
+#ifndef __AMDGPU_DRM_H__
+#define __AMDGPU_DRM_H__
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#define DRM_AMDGPU_GEM_CREATE		0x00
+#define DRM_AMDGPU_GEM_MMAP		0x01
+#define DRM_AMDGPU_CTX			0x02
+#define DRM_AMDGPU_BO_LIST		0x03
+#define DRM_AMDGPU_CS			0x04
+#define DRM_AMDGPU_INFO			0x05
+#define DRM_AMDGPU_GEM_METADATA		0x06
+#define DRM_AMDGPU_GEM_WAIT_IDLE	0x07
+#define DRM_AMDGPU_GEM_VA		0x08
+#define DRM_AMDGPU_WAIT_CS		0x09
+#define DRM_AMDGPU_GEM_OP		0x10
+#define DRM_AMDGPU_GEM_USERPTR		0x11
+#define DRM_AMDGPU_WAIT_FENCES		0x12
+#define DRM_AMDGPU_VM			0x13
+#define DRM_AMDGPU_FENCE_TO_HANDLE	0x14
+#define DRM_AMDGPU_SCHED		0x15
+
+#define DRM_IOCTL_AMDGPU_GEM_CREATE	DRM_IOWR(DRM_COMMAND_BASE + DRM_AMDGPU_GEM_CREATE, union drm_amdgpu_gem_create)
+#define DRM_IOCTL_AMDGPU_GEM_MMAP	DRM_IOWR(DRM_COMMAND_BASE + DRM_AMDGPU_GEM_MMAP, union drm_amdgpu_gem_mmap)
+#define DRM_IOCTL_AMDGPU_CTX		DRM_IOWR(DRM_COMMAND_BASE + DRM_AMDGPU_CTX, union drm_amdgpu_ctx)
+#define DRM_IOCTL_AMDGPU_BO_LIST	DRM_IOWR(DRM_COMMAND_BASE + DRM_AMDGPU_BO_LIST, union drm_amdgpu_bo_list)
+#define DRM_IOCTL_AMDGPU_CS		DRM_IOWR(DRM_COMMAND_BASE + DRM_AMDGPU_CS, union drm_amdgpu_cs)
+#define DRM_IOCTL_AMDGPU_INFO		DRM_IOW(DRM_COMMAND_BASE + DRM_AMDGPU_INFO, struct drm_amdgpu_info)
+#define DRM_IOCTL_AMDGPU_GEM_METADATA	DRM_IOWR(DRM_COMMAND_BASE + DRM_AMDGPU_GEM_METADATA, struct drm_amdgpu_gem_metadata)
+#define DRM_IOCTL_AMDGPU_GEM_WAIT_IDLE	DRM_IOWR(DRM_COMMAND_BASE + DRM_AMDGPU_GEM_WAIT_IDLE, union drm_amdgpu_gem_wait_idle)
+#define DRM_IOCTL_AMDGPU_GEM_VA		DRM_IOW(DRM_COMMAND_BASE + DRM_AMDGPU_GEM_VA, struct drm_amdgpu_gem_va)
+#define DRM_IOCTL_AMDGPU_WAIT_CS	DRM_IOWR(DRM_COMMAND_BASE + DRM_AMDGPU_WAIT_CS, union drm_amdgpu_wait_cs)
+#define DRM_IOCTL_AMDGPU_GEM_OP		DRM_IOWR(DRM_COMMAND_BASE + DRM_AMDGPU_GEM_OP, struct drm_amdgpu_gem_op)
+#define DRM_IOCTL_AMDGPU_GEM_USERPTR	DRM_IOWR(DRM_COMMAND_BASE + DRM_AMDGPU_GEM_USERPTR, struct drm_amdgpu_gem_userptr)
+#define DRM_IOCTL_AMDGPU_WAIT_FENCES	DRM_IOWR(DRM_COMMAND_BASE + DRM_AMDGPU_WAIT_FENCES, union drm_amdgpu_wait_fences)
+#define DRM_IOCTL_AMDGPU_VM		DRM_IOWR(DRM_COMMAND_BASE + DRM_AMDGPU_VM, union drm_amdgpu_vm)
+#define DRM_IOCTL_AMDGPU_FENCE_TO_HANDLE DRM_IOWR(DRM_COMMAND_BASE + DRM_AMDGPU_FENCE_TO_HANDLE, union drm_amdgpu_fence_to_handle)
+#define DRM_IOCTL_AMDGPU_SCHED		DRM_IOW(DRM_COMMAND_BASE + DRM_AMDGPU_SCHED, union drm_amdgpu_sched)
+
+/**
+ * DOC: memory domains
+ *
+ * %AMDGPU_GEM_DOMAIN_CPU	System memory that is not GPU accessible.
+ * Memory in this pool could be swapped out to disk if there is pressure.
+ *
+ * %AMDGPU_GEM_DOMAIN_GTT	GPU accessible system memory, mapped into the
+ * GPU's virtual address space via gart. Gart memory linearizes non-contiguous
+ * pages of system memory, allows GPU access system memory in a linearized
+ * fashion.
+ *
+ * %AMDGPU_GEM_DOMAIN_VRAM	Local video memory. For APUs, it is memory
+ * carved out by the BIOS.
+ *
+ * %AMDGPU_GEM_DOMAIN_GDS	Global on-chip data storage used to share data
+ * across shader threads.
+ *
+ * %AMDGPU_GEM_DOMAIN_GWS	Global wave sync, used to synchronize the
+ * execution of all the waves on a device.
+ *
+ * %AMDGPU_GEM_DOMAIN_OA	Ordered append, used by 3D or Compute engines
+ * for appending data.
+ *
+ * %AMDGPU_GEM_DOMAIN_DOORBELL	Doorbell. It is an MMIO region for
+ * signalling user mode queues.
+ */
+#define AMDGPU_GEM_DOMAIN_CPU		0x1
+#define AMDGPU_GEM_DOMAIN_GTT		0x2
+#define AMDGPU_GEM_DOMAIN_VRAM		0x4
+#define AMDGPU_GEM_DOMAIN_GDS		0x8
+#define AMDGPU_GEM_DOMAIN_GWS		0x10
+#define AMDGPU_GEM_DOMAIN_OA		0x20
+#define AMDGPU_GEM_DOMAIN_DOORBELL	0x40
+#define AMDGPU_GEM_DOMAIN_MASK		(AMDGPU_GEM_DOMAIN_CPU | \
+					 AMDGPU_GEM_DOMAIN_GTT | \
+					 AMDGPU_GEM_DOMAIN_VRAM | \
+					 AMDGPU_GEM_DOMAIN_GDS | \
+					 AMDGPU_GEM_DOMAIN_GWS | \
+					 AMDGPU_GEM_DOMAIN_OA | \
+					 AMDGPU_GEM_DOMAIN_DOORBELL)
+
+/* Flag that CPU access will be required for the case of VRAM domain */
+#define AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED	(1 << 0)
+/* Flag that CPU access will not work, this VRAM domain is invisible */
+#define AMDGPU_GEM_CREATE_NO_CPU_ACCESS		(1 << 1)
+/* Flag that USWC attributes should be used for GTT */
+#define AMDGPU_GEM_CREATE_CPU_GTT_USWC		(1 << 2)
+/* Flag that the memory should be in VRAM and cleared */
+#define AMDGPU_GEM_CREATE_VRAM_CLEARED		(1 << 3)
+/* Flag that allocating the BO should use linear VRAM */
+#define AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS	(1 << 5)
+/* Flag that BO is always valid in this VM */
+#define AMDGPU_GEM_CREATE_VM_ALWAYS_VALID	(1 << 6)
+/* Flag that BO sharing will be explicitly synchronized */
+#define AMDGPU_GEM_CREATE_EXPLICIT_SYNC		(1 << 7)
+/* Flag that indicates allocating MQD gart on GFX9, where the mtype
+ * for the second page onward should be set to NC. It should never
+ * be used by user space applications.
+ */
+#define AMDGPU_GEM_CREATE_CP_MQD_GFX9		(1 << 8)
+/* Flag that BO may contain sensitive data that must be wiped before
+ * releasing the memory
+ */
+#define AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE	(1 << 9)
+/* Flag that BO will be encrypted and that the TMZ bit should be
+ * set in the PTEs when mapping this buffer via GPUVM or
+ * accessing it with various hw blocks
+ */
+#define AMDGPU_GEM_CREATE_ENCRYPTED		(1 << 10)
+/* Flag that BO will be used only in preemptible context, which does
+ * not require GTT memory accounting
+ */
+#define AMDGPU_GEM_CREATE_PREEMPTIBLE		(1 << 11)
+/* Flag that BO can be discarded under memory pressure without keeping the
+ * content.
+ */
+#define AMDGPU_GEM_CREATE_DISCARDABLE		(1 << 12)
+/* Flag that BO is shared coherently between multiple devices or CPU threads.
+ * May depend on GPU instructions to flush caches to system scope explicitly.
+ *
+ * This influences the choice of MTYPE in the PTEs on GFXv9 and later GPUs and
+ * may override the MTYPE selected in AMDGPU_VA_OP_MAP.
+ */
+#define AMDGPU_GEM_CREATE_COHERENT		(1 << 13)
+/* Flag that BO should not be cached by GPU. Coherent without having to flush
+ * GPU caches explicitly
+ *
+ * This influences the choice of MTYPE in the PTEs on GFXv9 and later GPUs and
+ * may override the MTYPE selected in AMDGPU_VA_OP_MAP.
+ */
+#define AMDGPU_GEM_CREATE_UNCACHED		(1 << 14)
+/* Flag that BO should be coherent across devices when using device-level
+ * atomics. May depend on GPU instructions to flush caches to device scope
+ * explicitly, promoting them to system scope automatically.
+ *
+ * This influences the choice of MTYPE in the PTEs on GFXv9 and later GPUs and
+ * may override the MTYPE selected in AMDGPU_VA_OP_MAP.
+ */
+#define AMDGPU_GEM_CREATE_EXT_COHERENT		(1 << 15)
+
+struct drm_amdgpu_gem_create_in  {
+	/** the requested memory size */
+	__u64 bo_size;
+	/** physical start_addr alignment in bytes for some HW requirements */
+	__u64 alignment;
+	/** the requested memory domains */
+	__u64 domains;
+	/** allocation flags */
+	__u64 domain_flags;
+};
+
+struct drm_amdgpu_gem_create_out  {
+	/** returned GEM object handle */
+	__u32 handle;
+	__u32 _pad;
+};
+
+union drm_amdgpu_gem_create {
+	struct drm_amdgpu_gem_create_in		in;
+	struct drm_amdgpu_gem_create_out	out;
+};
+
+/** Opcode to create new residency list.  */
+#define AMDGPU_BO_LIST_OP_CREATE	0
+/** Opcode to destroy previously created residency list */
+#define AMDGPU_BO_LIST_OP_DESTROY	1
+/** Opcode to update resource information in the list */
+#define AMDGPU_BO_LIST_OP_UPDATE	2
+
+struct drm_amdgpu_bo_list_in {
+	/** Type of operation */
+	__u32 operation;
+	/** Handle of list or 0 if we want to create one */
+	__u32 list_handle;
+	/** Number of BOs in list  */
+	__u32 bo_number;
+	/** Size of each element describing BO */
+	__u32 bo_info_size;
+	/** Pointer to array describing BOs */
+	__u64 bo_info_ptr;
+};
+
+struct drm_amdgpu_bo_list_entry {
+	/** Handle of BO */
+	__u32 bo_handle;
+	/** New (if specified) BO priority to be used during migration */
+	__u32 bo_priority;
+};
+
+struct drm_amdgpu_bo_list_out {
+	/** Handle of resource list  */
+	__u32 list_handle;
+	__u32 _pad;
+};
+
+union drm_amdgpu_bo_list {
+	struct drm_amdgpu_bo_list_in in;
+	struct drm_amdgpu_bo_list_out out;
+};
+
+/* context related */
+#define AMDGPU_CTX_OP_ALLOC_CTX	1
+#define AMDGPU_CTX_OP_FREE_CTX	2
+#define AMDGPU_CTX_OP_QUERY_STATE	3
+#define AMDGPU_CTX_OP_QUERY_STATE2	4
+#define AMDGPU_CTX_OP_GET_STABLE_PSTATE	5
+#define AMDGPU_CTX_OP_SET_STABLE_PSTATE	6
+
+/* GPU reset status */
+#define AMDGPU_CTX_NO_RESET		0
+/* this the context caused it */
+#define AMDGPU_CTX_GUILTY_RESET		1
+/* some other context caused it */
+#define AMDGPU_CTX_INNOCENT_RESET	2
+/* unknown cause */
+#define AMDGPU_CTX_UNKNOWN_RESET	3
+
+/* indicate gpu reset occurred after ctx created */
+#define AMDGPU_CTX_QUERY2_FLAGS_RESET    (1<<0)
+/* indicate vram lost occurred after ctx created */
+#define AMDGPU_CTX_QUERY2_FLAGS_VRAMLOST (1<<1)
+/* indicate some job from this context once cause gpu hang */
+#define AMDGPU_CTX_QUERY2_FLAGS_GUILTY   (1<<2)
+/* indicate some errors are detected by RAS */
+#define AMDGPU_CTX_QUERY2_FLAGS_RAS_CE   (1<<3)
+#define AMDGPU_CTX_QUERY2_FLAGS_RAS_UE   (1<<4)
+/* indicate that the reset hasn't completed yet */
+#define AMDGPU_CTX_QUERY2_FLAGS_RESET_IN_PROGRESS (1<<5)
+
+/* Context priority level */
+#define AMDGPU_CTX_PRIORITY_UNSET       -2048
+#define AMDGPU_CTX_PRIORITY_VERY_LOW    -1023
+#define AMDGPU_CTX_PRIORITY_LOW         -512
+#define AMDGPU_CTX_PRIORITY_NORMAL      0
+/*
+ * When used in struct drm_amdgpu_ctx_in, a priority above NORMAL requires
+ * CAP_SYS_NICE or DRM_MASTER
+*/
+#define AMDGPU_CTX_PRIORITY_HIGH        512
+#define AMDGPU_CTX_PRIORITY_VERY_HIGH   1023
+
+/* select a stable profiling pstate for perfmon tools */
+#define AMDGPU_CTX_STABLE_PSTATE_FLAGS_MASK  0xf
+#define AMDGPU_CTX_STABLE_PSTATE_NONE  0
+#define AMDGPU_CTX_STABLE_PSTATE_STANDARD  1
+#define AMDGPU_CTX_STABLE_PSTATE_MIN_SCLK  2
+#define AMDGPU_CTX_STABLE_PSTATE_MIN_MCLK  3
+#define AMDGPU_CTX_STABLE_PSTATE_PEAK  4
+
+struct drm_amdgpu_ctx_in {
+	/** AMDGPU_CTX_OP_* */
+	__u32	op;
+	/** Flags */
+	__u32	flags;
+	__u32	ctx_id;
+	/** AMDGPU_CTX_PRIORITY_* */
+	__s32	priority;
+};
+
+union drm_amdgpu_ctx_out {
+		struct {
+			__u32	ctx_id;
+			__u32	_pad;
+		} alloc;
+
+		struct {
+			/** For future use, no flags defined so far */
+			__u64	flags;
+			/** Number of resets caused by this context so far. */
+			__u32	hangs;
+			/** Reset status since the last call of the ioctl. */
+			__u32	reset_status;
+		} state;
+
+		struct {
+			__u32	flags;
+			__u32	_pad;
+		} pstate;
+};
+
+union drm_amdgpu_ctx {
+	struct drm_amdgpu_ctx_in in;
+	union drm_amdgpu_ctx_out out;
+};
+
+/* vm ioctl */
+#define AMDGPU_VM_OP_RESERVE_VMID	1
+#define AMDGPU_VM_OP_UNRESERVE_VMID	2
+
+struct drm_amdgpu_vm_in {
+	/** AMDGPU_VM_OP_* */
+	__u32	op;
+	__u32	flags;
+};
+
+struct drm_amdgpu_vm_out {
+	/** For future use, no flags defined so far */
+	__u64	flags;
+};
+
+union drm_amdgpu_vm {
+	struct drm_amdgpu_vm_in in;
+	struct drm_amdgpu_vm_out out;
+};
+
+/* sched ioctl */
+#define AMDGPU_SCHED_OP_PROCESS_PRIORITY_OVERRIDE	1
+#define AMDGPU_SCHED_OP_CONTEXT_PRIORITY_OVERRIDE	2
+
+struct drm_amdgpu_sched_in {
+	/* AMDGPU_SCHED_OP_* */
+	__u32	op;
+	__u32	fd;
+	/** AMDGPU_CTX_PRIORITY_* */
+	__s32	priority;
+	__u32   ctx_id;
+};
+
+union drm_amdgpu_sched {
+	struct drm_amdgpu_sched_in in;
+};
+
+/*
+ * This is not a reliable API and you should expect it to fail for any
+ * number of reasons and have fallback path that do not use userptr to
+ * perform any operation.
+ */
+#define AMDGPU_GEM_USERPTR_READONLY	(1 << 0)
+#define AMDGPU_GEM_USERPTR_ANONONLY	(1 << 1)
+#define AMDGPU_GEM_USERPTR_VALIDATE	(1 << 2)
+#define AMDGPU_GEM_USERPTR_REGISTER	(1 << 3)
+
+struct drm_amdgpu_gem_userptr {
+	__u64		addr;
+	__u64		size;
+	/* AMDGPU_GEM_USERPTR_* */
+	__u32		flags;
+	/* Resulting GEM handle */
+	__u32		handle;
+};
+
+/* SI-CI-VI: */
+/* same meaning as the GB_TILE_MODE and GL_MACRO_TILE_MODE fields */
+#define AMDGPU_TILING_ARRAY_MODE_SHIFT			0
+#define AMDGPU_TILING_ARRAY_MODE_MASK			0xf
+#define AMDGPU_TILING_PIPE_CONFIG_SHIFT			4
+#define AMDGPU_TILING_PIPE_CONFIG_MASK			0x1f
+#define AMDGPU_TILING_TILE_SPLIT_SHIFT			9
+#define AMDGPU_TILING_TILE_SPLIT_MASK			0x7
+#define AMDGPU_TILING_MICRO_TILE_MODE_SHIFT		12
+#define AMDGPU_TILING_MICRO_TILE_MODE_MASK		0x7
+#define AMDGPU_TILING_BANK_WIDTH_SHIFT			15
+#define AMDGPU_TILING_BANK_WIDTH_MASK			0x3
+#define AMDGPU_TILING_BANK_HEIGHT_SHIFT			17
+#define AMDGPU_TILING_BANK_HEIGHT_MASK			0x3
+#define AMDGPU_TILING_MACRO_TILE_ASPECT_SHIFT		19
+#define AMDGPU_TILING_MACRO_TILE_ASPECT_MASK		0x3
+#define AMDGPU_TILING_NUM_BANKS_SHIFT			21
+#define AMDGPU_TILING_NUM_BANKS_MASK			0x3
+
+/* GFX9 and later: */
+#define AMDGPU_TILING_SWIZZLE_MODE_SHIFT		0
+#define AMDGPU_TILING_SWIZZLE_MODE_MASK			0x1f
+#define AMDGPU_TILING_DCC_OFFSET_256B_SHIFT		5
+#define AMDGPU_TILING_DCC_OFFSET_256B_MASK		0xFFFFFF
+#define AMDGPU_TILING_DCC_PITCH_MAX_SHIFT		29
+#define AMDGPU_TILING_DCC_PITCH_MAX_MASK		0x3FFF
+#define AMDGPU_TILING_DCC_INDEPENDENT_64B_SHIFT		43
+#define AMDGPU_TILING_DCC_INDEPENDENT_64B_MASK		0x1
+#define AMDGPU_TILING_DCC_INDEPENDENT_128B_SHIFT	44
+#define AMDGPU_TILING_DCC_INDEPENDENT_128B_MASK		0x1
+#define AMDGPU_TILING_SCANOUT_SHIFT			63
+#define AMDGPU_TILING_SCANOUT_MASK			0x1
+
+/* Set/Get helpers for tiling flags. */
+#define AMDGPU_TILING_SET(field, value) \
+	(((__u64)(value) & AMDGPU_TILING_##field##_MASK) << AMDGPU_TILING_##field##_SHIFT)
+#define AMDGPU_TILING_GET(value, field) \
+	(((__u64)(value) >> AMDGPU_TILING_##field##_SHIFT) & AMDGPU_TILING_##field##_MASK)
+
+#define AMDGPU_GEM_METADATA_OP_SET_METADATA                  1
+#define AMDGPU_GEM_METADATA_OP_GET_METADATA                  2
+
+/** The same structure is shared for input/output */
+struct drm_amdgpu_gem_metadata {
+	/** GEM Object handle */
+	__u32	handle;
+	/** Do we want get or set metadata */
+	__u32	op;
+	struct {
+		/** For future use, no flags defined so far */
+		__u64	flags;
+		/** family specific tiling info */
+		__u64	tiling_info;
+		__u32	data_size_bytes;
+		__u32	data[64];
+	} data;
+};
+
+struct drm_amdgpu_gem_mmap_in {
+	/** the GEM object handle */
+	__u32 handle;
+	__u32 _pad;
+};
+
+struct drm_amdgpu_gem_mmap_out {
+	/** mmap offset from the vma offset manager */
+	__u64 addr_ptr;
+};
+
+union drm_amdgpu_gem_mmap {
+	struct drm_amdgpu_gem_mmap_in   in;
+	struct drm_amdgpu_gem_mmap_out out;
+};
+
+struct drm_amdgpu_gem_wait_idle_in {
+	/** GEM object handle */
+	__u32 handle;
+	/** For future use, no flags defined so far */
+	__u32 flags;
+	/** Absolute timeout to wait */
+	__u64 timeout;
+};
+
+struct drm_amdgpu_gem_wait_idle_out {
+	/** BO status:  0 - BO is idle, 1 - BO is busy */
+	__u32 status;
+	/** Returned current memory domain */
+	__u32 domain;
+};
+
+union drm_amdgpu_gem_wait_idle {
+	struct drm_amdgpu_gem_wait_idle_in  in;
+	struct drm_amdgpu_gem_wait_idle_out out;
+};
+
+struct drm_amdgpu_wait_cs_in {
+	/* Command submission handle
+         * handle equals 0 means none to wait for
+         * handle equals ~0ull means wait for the latest sequence number
+         */
+	__u64 handle;
+	/** Absolute timeout to wait */
+	__u64 timeout;
+	__u32 ip_type;
+	__u32 ip_instance;
+	__u32 ring;
+	__u32 ctx_id;
+};
+
+struct drm_amdgpu_wait_cs_out {
+	/** CS status:  0 - CS completed, 1 - CS still busy */
+	__u64 status;
+};
+
+union drm_amdgpu_wait_cs {
+	struct drm_amdgpu_wait_cs_in in;
+	struct drm_amdgpu_wait_cs_out out;
+};
+
+struct drm_amdgpu_fence {
+	__u32 ctx_id;
+	__u32 ip_type;
+	__u32 ip_instance;
+	__u32 ring;
+	__u64 seq_no;
+};
+
+struct drm_amdgpu_wait_fences_in {
+	/** This points to uint64_t * which points to fences */
+	__u64 fences;
+	__u32 fence_count;
+	__u32 wait_all;
+	__u64 timeout_ns;
+};
+
+struct drm_amdgpu_wait_fences_out {
+	__u32 status;
+	__u32 first_signaled;
+};
+
+union drm_amdgpu_wait_fences {
+	struct drm_amdgpu_wait_fences_in in;
+	struct drm_amdgpu_wait_fences_out out;
+};
+
+#define AMDGPU_GEM_OP_GET_GEM_CREATE_INFO	0
+#define AMDGPU_GEM_OP_SET_PLACEMENT		1
+
+/* Sets or returns a value associated with a buffer. */
+struct drm_amdgpu_gem_op {
+	/** GEM object handle */
+	__u32	handle;
+	/** AMDGPU_GEM_OP_* */
+	__u32	op;
+	/** Input or return value */
+	__u64	value;
+};
+
+#define AMDGPU_VA_OP_MAP			1
+#define AMDGPU_VA_OP_UNMAP			2
+#define AMDGPU_VA_OP_CLEAR			3
+#define AMDGPU_VA_OP_REPLACE			4
+
+/* Delay the page table update till the next CS */
+#define AMDGPU_VM_DELAY_UPDATE		(1 << 0)
+
+/* Mapping flags */
+/* readable mapping */
+#define AMDGPU_VM_PAGE_READABLE		(1 << 1)
+/* writable mapping */
+#define AMDGPU_VM_PAGE_WRITEABLE	(1 << 2)
+/* executable mapping, new for VI */
+#define AMDGPU_VM_PAGE_EXECUTABLE	(1 << 3)
+/* partially resident texture */
+#define AMDGPU_VM_PAGE_PRT		(1 << 4)
+/* MTYPE flags use bit 5 to 8 */
+#define AMDGPU_VM_MTYPE_MASK		(0xf << 5)
+/* Default MTYPE. Pre-AI must use this.  Recommended for newer ASICs. */
+#define AMDGPU_VM_MTYPE_DEFAULT		(0 << 5)
+/* Use Non Coherent MTYPE instead of default MTYPE */
+#define AMDGPU_VM_MTYPE_NC		(1 << 5)
+/* Use Write Combine MTYPE instead of default MTYPE */
+#define AMDGPU_VM_MTYPE_WC		(2 << 5)
+/* Use Cache Coherent MTYPE instead of default MTYPE */
+#define AMDGPU_VM_MTYPE_CC		(3 << 5)
+/* Use UnCached MTYPE instead of default MTYPE */
+#define AMDGPU_VM_MTYPE_UC		(4 << 5)
+/* Use Read Write MTYPE instead of default MTYPE */
+#define AMDGPU_VM_MTYPE_RW		(5 << 5)
+/* don't allocate MALL */
+#define AMDGPU_VM_PAGE_NOALLOC		(1 << 9)
+
+struct drm_amdgpu_gem_va {
+	/** GEM object handle */
+	__u32 handle;
+	__u32 _pad;
+	/** AMDGPU_VA_OP_* */
+	__u32 operation;
+	/** AMDGPU_VM_PAGE_* */
+	__u32 flags;
+	/** va address to assign . Must be correctly aligned.*/
+	__u64 va_address;
+	/** Specify offset inside of BO to assign. Must be correctly aligned.*/
+	__u64 offset_in_bo;
+	/** Specify mapping size. Must be correctly aligned. */
+	__u64 map_size;
+};
+
+#define AMDGPU_HW_IP_GFX          0
+#define AMDGPU_HW_IP_COMPUTE      1
+#define AMDGPU_HW_IP_DMA          2
+#define AMDGPU_HW_IP_UVD          3
+#define AMDGPU_HW_IP_VCE          4
+#define AMDGPU_HW_IP_UVD_ENC      5
+#define AMDGPU_HW_IP_VCN_DEC      6
+/*
+ * From VCN4, AMDGPU_HW_IP_VCN_ENC is re-used to support
+ * both encoding and decoding jobs.
+ */
+#define AMDGPU_HW_IP_VCN_ENC      7
+#define AMDGPU_HW_IP_VCN_JPEG     8
+#define AMDGPU_HW_IP_VPE          9
+#define AMDGPU_HW_IP_NUM          10
+
+#define AMDGPU_HW_IP_INSTANCE_MAX_COUNT 1
+
+#define AMDGPU_CHUNK_ID_IB		0x01
+#define AMDGPU_CHUNK_ID_FENCE		0x02
+#define AMDGPU_CHUNK_ID_DEPENDENCIES	0x03
+#define AMDGPU_CHUNK_ID_SYNCOBJ_IN      0x04
+#define AMDGPU_CHUNK_ID_SYNCOBJ_OUT     0x05
+#define AMDGPU_CHUNK_ID_BO_HANDLES      0x06
+#define AMDGPU_CHUNK_ID_SCHEDULED_DEPENDENCIES	0x07
+#define AMDGPU_CHUNK_ID_SYNCOBJ_TIMELINE_WAIT    0x08
+#define AMDGPU_CHUNK_ID_SYNCOBJ_TIMELINE_SIGNAL  0x09
+#define AMDGPU_CHUNK_ID_CP_GFX_SHADOW   0x0a
+
+struct drm_amdgpu_cs_chunk {
+	__u32		chunk_id;
+	__u32		length_dw;
+	__u64		chunk_data;
+};
+
+struct drm_amdgpu_cs_in {
+	/** Rendering context id */
+	__u32		ctx_id;
+	/**  Handle of resource list associated with CS */
+	__u32		bo_list_handle;
+	__u32		num_chunks;
+	__u32		flags;
+	/** this points to __u64 * which point to cs chunks */
+	__u64		chunks;
+};
+
+struct drm_amdgpu_cs_out {
+	__u64 handle;
+};
+
+union drm_amdgpu_cs {
+	struct drm_amdgpu_cs_in in;
+	struct drm_amdgpu_cs_out out;
+};
+
+/* Specify flags to be used for IB */
+
+/* This IB should be submitted to CE */
+#define AMDGPU_IB_FLAG_CE	(1<<0)
+
+/* Preamble flag, which means the IB could be dropped if no context switch */
+#define AMDGPU_IB_FLAG_PREAMBLE (1<<1)
+
+/* Preempt flag, IB should set Pre_enb bit if PREEMPT flag detected */
+#define AMDGPU_IB_FLAG_PREEMPT (1<<2)
+
+/* The IB fence should do the L2 writeback but not invalidate any shader
+ * caches (L2/vL1/sL1/I$). */
+#define AMDGPU_IB_FLAG_TC_WB_NOT_INVALIDATE (1 << 3)
+
+/* Set GDS_COMPUTE_MAX_WAVE_ID = DEFAULT before PACKET3_INDIRECT_BUFFER.
+ * This will reset wave ID counters for the IB.
+ */
+#define AMDGPU_IB_FLAG_RESET_GDS_MAX_WAVE_ID (1 << 4)
+
+/* Flag the IB as secure (TMZ)
+ */
+#define AMDGPU_IB_FLAGS_SECURE  (1 << 5)
+
+/* Tell KMD to flush and invalidate caches
+ */
+#define AMDGPU_IB_FLAG_EMIT_MEM_SYNC  (1 << 6)
+
+struct drm_amdgpu_cs_chunk_ib {
+	__u32 _pad;
+	/** AMDGPU_IB_FLAG_* */
+	__u32 flags;
+	/** Virtual address to begin IB execution */
+	__u64 va_start;
+	/** Size of submission */
+	__u32 ib_bytes;
+	/** HW IP to submit to */
+	__u32 ip_type;
+	/** HW IP index of the same type to submit to  */
+	__u32 ip_instance;
+	/** Ring index to submit to */
+	__u32 ring;
+};
+
+struct drm_amdgpu_cs_chunk_dep {
+	__u32 ip_type;
+	__u32 ip_instance;
+	__u32 ring;
+	__u32 ctx_id;
+	__u64 handle;
+};
+
+struct drm_amdgpu_cs_chunk_fence {
+	__u32 handle;
+	__u32 offset;
+};
+
+struct drm_amdgpu_cs_chunk_sem {
+	__u32 handle;
+};
+
+struct drm_amdgpu_cs_chunk_syncobj {
+       __u32 handle;
+       __u32 flags;
+       __u64 point;
+};
+
+#define AMDGPU_FENCE_TO_HANDLE_GET_SYNCOBJ	0
+#define AMDGPU_FENCE_TO_HANDLE_GET_SYNCOBJ_FD	1
+#define AMDGPU_FENCE_TO_HANDLE_GET_SYNC_FILE_FD	2
+
+union drm_amdgpu_fence_to_handle {
+	struct {
+		struct drm_amdgpu_fence fence;
+		__u32 what;
+		__u32 pad;
+	} in;
+	struct {
+		__u32 handle;
+	} out;
+};
+
+struct drm_amdgpu_cs_chunk_data {
+	union {
+		struct drm_amdgpu_cs_chunk_ib		ib_data;
+		struct drm_amdgpu_cs_chunk_fence	fence_data;
+	};
+};
+
+#define AMDGPU_CS_CHUNK_CP_GFX_SHADOW_FLAGS_INIT_SHADOW         0x1
+
+struct drm_amdgpu_cs_chunk_cp_gfx_shadow {
+	__u64 shadow_va;
+	__u64 csa_va;
+	__u64 gds_va;
+	__u64 flags;
+};
+
+/*
+ *  Query h/w info: Flag that this is integrated (a.h.a. fusion) GPU
+ *
+ */
+#define AMDGPU_IDS_FLAGS_FUSION         0x1
+#define AMDGPU_IDS_FLAGS_PREEMPTION     0x2
+#define AMDGPU_IDS_FLAGS_TMZ            0x4
+#define AMDGPU_IDS_FLAGS_CONFORMANT_TRUNC_COORD 0x8
+
+/* indicate if acceleration can be working */
+#define AMDGPU_INFO_ACCEL_WORKING		0x00
+/* get the crtc_id from the mode object id? */
+#define AMDGPU_INFO_CRTC_FROM_ID		0x01
+/* query hw IP info */
+#define AMDGPU_INFO_HW_IP_INFO			0x02
+/* query hw IP instance count for the specified type */
+#define AMDGPU_INFO_HW_IP_COUNT			0x03
+/* timestamp for GL_ARB_timer_query */
+#define AMDGPU_INFO_TIMESTAMP			0x05
+/* Query the firmware version */
+#define AMDGPU_INFO_FW_VERSION			0x0e
+	/* Subquery id: Query VCE firmware version */
+	#define AMDGPU_INFO_FW_VCE		0x1
+	/* Subquery id: Query UVD firmware version */
+	#define AMDGPU_INFO_FW_UVD		0x2
+	/* Subquery id: Query GMC firmware version */
+	#define AMDGPU_INFO_FW_GMC		0x03
+	/* Subquery id: Query GFX ME firmware version */
+	#define AMDGPU_INFO_FW_GFX_ME		0x04
+	/* Subquery id: Query GFX PFP firmware version */
+	#define AMDGPU_INFO_FW_GFX_PFP		0x05
+	/* Subquery id: Query GFX CE firmware version */
+	#define AMDGPU_INFO_FW_GFX_CE		0x06
+	/* Subquery id: Query GFX RLC firmware version */
+	#define AMDGPU_INFO_FW_GFX_RLC		0x07
+	/* Subquery id: Query GFX MEC firmware version */
+	#define AMDGPU_INFO_FW_GFX_MEC		0x08
+	/* Subquery id: Query SMC firmware version */
+	#define AMDGPU_INFO_FW_SMC		0x0a
+	/* Subquery id: Query SDMA firmware version */
+	#define AMDGPU_INFO_FW_SDMA		0x0b
+	/* Subquery id: Query PSP SOS firmware version */
+	#define AMDGPU_INFO_FW_SOS		0x0c
+	/* Subquery id: Query PSP ASD firmware version */
+	#define AMDGPU_INFO_FW_ASD		0x0d
+	/* Subquery id: Query VCN firmware version */
+	#define AMDGPU_INFO_FW_VCN		0x0e
+	/* Subquery id: Query GFX RLC SRLC firmware version */
+	#define AMDGPU_INFO_FW_GFX_RLC_RESTORE_LIST_CNTL 0x0f
+	/* Subquery id: Query GFX RLC SRLG firmware version */
+	#define AMDGPU_INFO_FW_GFX_RLC_RESTORE_LIST_GPM_MEM 0x10
+	/* Subquery id: Query GFX RLC SRLS firmware version */
+	#define AMDGPU_INFO_FW_GFX_RLC_RESTORE_LIST_SRM_MEM 0x11
+	/* Subquery id: Query DMCU firmware version */
+	#define AMDGPU_INFO_FW_DMCU		0x12
+	#define AMDGPU_INFO_FW_TA		0x13
+	/* Subquery id: Query DMCUB firmware version */
+	#define AMDGPU_INFO_FW_DMCUB		0x14
+	/* Subquery id: Query TOC firmware version */
+	#define AMDGPU_INFO_FW_TOC		0x15
+	/* Subquery id: Query CAP firmware version */
+	#define AMDGPU_INFO_FW_CAP		0x16
+	/* Subquery id: Query GFX RLCP firmware version */
+	#define AMDGPU_INFO_FW_GFX_RLCP		0x17
+	/* Subquery id: Query GFX RLCV firmware version */
+	#define AMDGPU_INFO_FW_GFX_RLCV		0x18
+	/* Subquery id: Query MES_KIQ firmware version */
+	#define AMDGPU_INFO_FW_MES_KIQ		0x19
+	/* Subquery id: Query MES firmware version */
+	#define AMDGPU_INFO_FW_MES		0x1a
+	/* Subquery id: Query IMU firmware version */
+	#define AMDGPU_INFO_FW_IMU		0x1b
+	/* Subquery id: Query VPE firmware version */
+	#define AMDGPU_INFO_FW_VPE		0x1c
+
+/* number of bytes moved for TTM migration */
+#define AMDGPU_INFO_NUM_BYTES_MOVED		0x0f
+/* the used VRAM size */
+#define AMDGPU_INFO_VRAM_USAGE			0x10
+/* the used GTT size */
+#define AMDGPU_INFO_GTT_USAGE			0x11
+/* Information about GDS, etc. resource configuration */
+#define AMDGPU_INFO_GDS_CONFIG			0x13
+/* Query information about VRAM and GTT domains */
+#define AMDGPU_INFO_VRAM_GTT			0x14
+/* Query information about register in MMR address space*/
+#define AMDGPU_INFO_READ_MMR_REG		0x15
+/* Query information about device: rev id, family, etc. */
+#define AMDGPU_INFO_DEV_INFO			0x16
+/* visible vram usage */
+#define AMDGPU_INFO_VIS_VRAM_USAGE		0x17
+/* number of TTM buffer evictions */
+#define AMDGPU_INFO_NUM_EVICTIONS		0x18
+/* Query memory about VRAM and GTT domains */
+#define AMDGPU_INFO_MEMORY			0x19
+/* Query vce clock table */
+#define AMDGPU_INFO_VCE_CLOCK_TABLE		0x1A
+/* Query vbios related information */
+#define AMDGPU_INFO_VBIOS			0x1B
+	/* Subquery id: Query vbios size */
+	#define AMDGPU_INFO_VBIOS_SIZE		0x1
+	/* Subquery id: Query vbios image */
+	#define AMDGPU_INFO_VBIOS_IMAGE		0x2
+	/* Subquery id: Query vbios info */
+	#define AMDGPU_INFO_VBIOS_INFO		0x3
+/* Query UVD handles */
+#define AMDGPU_INFO_NUM_HANDLES			0x1C
+/* Query sensor related information */
+#define AMDGPU_INFO_SENSOR			0x1D
+	/* Subquery id: Query GPU shader clock */
+	#define AMDGPU_INFO_SENSOR_GFX_SCLK		0x1
+	/* Subquery id: Query GPU memory clock */
+	#define AMDGPU_INFO_SENSOR_GFX_MCLK		0x2
+	/* Subquery id: Query GPU temperature */
+	#define AMDGPU_INFO_SENSOR_GPU_TEMP		0x3
+	/* Subquery id: Query GPU load */
+	#define AMDGPU_INFO_SENSOR_GPU_LOAD		0x4
+	/* Subquery id: Query average GPU power	*/
+	#define AMDGPU_INFO_SENSOR_GPU_AVG_POWER	0x5
+	/* Subquery id: Query northbridge voltage */
+	#define AMDGPU_INFO_SENSOR_VDDNB		0x6
+	/* Subquery id: Query graphics voltage */
+	#define AMDGPU_INFO_SENSOR_VDDGFX		0x7
+	/* Subquery id: Query GPU stable pstate shader clock */
+	#define AMDGPU_INFO_SENSOR_STABLE_PSTATE_GFX_SCLK		0x8
+	/* Subquery id: Query GPU stable pstate memory clock */
+	#define AMDGPU_INFO_SENSOR_STABLE_PSTATE_GFX_MCLK		0x9
+	/* Subquery id: Query GPU peak pstate shader clock */
+	#define AMDGPU_INFO_SENSOR_PEAK_PSTATE_GFX_SCLK			0xa
+	/* Subquery id: Query GPU peak pstate memory clock */
+	#define AMDGPU_INFO_SENSOR_PEAK_PSTATE_GFX_MCLK			0xb
+/* Number of VRAM page faults on CPU access. */
+#define AMDGPU_INFO_NUM_VRAM_CPU_PAGE_FAULTS	0x1E
+#define AMDGPU_INFO_VRAM_LOST_COUNTER		0x1F
+/* query ras mask of enabled features*/
+#define AMDGPU_INFO_RAS_ENABLED_FEATURES	0x20
+/* RAS MASK: UMC (VRAM) */
+#define AMDGPU_INFO_RAS_ENABLED_UMC			(1 << 0)
+/* RAS MASK: SDMA */
+#define AMDGPU_INFO_RAS_ENABLED_SDMA			(1 << 1)
+/* RAS MASK: GFX */
+#define AMDGPU_INFO_RAS_ENABLED_GFX			(1 << 2)
+/* RAS MASK: MMHUB */
+#define AMDGPU_INFO_RAS_ENABLED_MMHUB			(1 << 3)
+/* RAS MASK: ATHUB */
+#define AMDGPU_INFO_RAS_ENABLED_ATHUB			(1 << 4)
+/* RAS MASK: PCIE */
+#define AMDGPU_INFO_RAS_ENABLED_PCIE			(1 << 5)
+/* RAS MASK: HDP */
+#define AMDGPU_INFO_RAS_ENABLED_HDP			(1 << 6)
+/* RAS MASK: XGMI */
+#define AMDGPU_INFO_RAS_ENABLED_XGMI			(1 << 7)
+/* RAS MASK: DF */
+#define AMDGPU_INFO_RAS_ENABLED_DF			(1 << 8)
+/* RAS MASK: SMN */
+#define AMDGPU_INFO_RAS_ENABLED_SMN			(1 << 9)
+/* RAS MASK: SEM */
+#define AMDGPU_INFO_RAS_ENABLED_SEM			(1 << 10)
+/* RAS MASK: MP0 */
+#define AMDGPU_INFO_RAS_ENABLED_MP0			(1 << 11)
+/* RAS MASK: MP1 */
+#define AMDGPU_INFO_RAS_ENABLED_MP1			(1 << 12)
+/* RAS MASK: FUSE */
+#define AMDGPU_INFO_RAS_ENABLED_FUSE			(1 << 13)
+/* query video encode/decode caps */
+#define AMDGPU_INFO_VIDEO_CAPS			0x21
+	/* Subquery id: Decode */
+	#define AMDGPU_INFO_VIDEO_CAPS_DECODE		0
+	/* Subquery id: Encode */
+	#define AMDGPU_INFO_VIDEO_CAPS_ENCODE		1
+/* Query the max number of IBs per gang per submission */
+#define AMDGPU_INFO_MAX_IBS			0x22
+/* query last page fault info */
+#define AMDGPU_INFO_GPUVM_FAULT			0x23
+
+#define AMDGPU_INFO_MMR_SE_INDEX_SHIFT	0
+#define AMDGPU_INFO_MMR_SE_INDEX_MASK	0xff
+#define AMDGPU_INFO_MMR_SH_INDEX_SHIFT	8
+#define AMDGPU_INFO_MMR_SH_INDEX_MASK	0xff
+
+struct drm_amdgpu_query_fw {
+	/** AMDGPU_INFO_FW_* */
+	__u32 fw_type;
+	/**
+	 * Index of the IP if there are more IPs of
+	 * the same type.
+	 */
+	__u32 ip_instance;
+	/**
+	 * Index of the engine. Whether this is used depends
+	 * on the firmware type. (e.g. MEC, SDMA)
+	 */
+	__u32 index;
+	__u32 _pad;
+};
+
+/* Input structure for the INFO ioctl */
+struct drm_amdgpu_info {
+	/* Where the return value will be stored */
+	__u64 return_pointer;
+	/* The size of the return value. Just like "size" in "snprintf",
+	 * it limits how many bytes the kernel can write. */
+	__u32 return_size;
+	/* The query request id. */
+	__u32 query;
+
+	union {
+		struct {
+			__u32 id;
+			__u32 _pad;
+		} mode_crtc;
+
+		struct {
+			/** AMDGPU_HW_IP_* */
+			__u32 type;
+			/**
+			 * Index of the IP if there are more IPs of the same
+			 * type. Ignored by AMDGPU_INFO_HW_IP_COUNT.
+			 */
+			__u32 ip_instance;
+		} query_hw_ip;
+
+		struct {
+			__u32 dword_offset;
+			/** number of registers to read */
+			__u32 count;
+			__u32 instance;
+			/** For future use, no flags defined so far */
+			__u32 flags;
+		} read_mmr_reg;
+
+		struct drm_amdgpu_query_fw query_fw;
+
+		struct {
+			__u32 type;
+			__u32 offset;
+		} vbios_info;
+
+		struct {
+			__u32 type;
+		} sensor_info;
+
+		struct {
+			__u32 type;
+		} video_cap;
+	};
+};
+
+struct drm_amdgpu_info_gds {
+	/** GDS GFX partition size */
+	__u32 gds_gfx_partition_size;
+	/** GDS compute partition size */
+	__u32 compute_partition_size;
+	/** total GDS memory size */
+	__u32 gds_total_size;
+	/** GWS size per GFX partition */
+	__u32 gws_per_gfx_partition;
+	/** GSW size per compute partition */
+	__u32 gws_per_compute_partition;
+	/** OA size per GFX partition */
+	__u32 oa_per_gfx_partition;
+	/** OA size per compute partition */
+	__u32 oa_per_compute_partition;
+	__u32 _pad;
+};
+
+struct drm_amdgpu_info_vram_gtt {
+	__u64 vram_size;
+	__u64 vram_cpu_accessible_size;
+	__u64 gtt_size;
+};
+
+struct drm_amdgpu_heap_info {
+	/** max. physical memory */
+	__u64 total_heap_size;
+
+	/** Theoretical max. available memory in the given heap */
+	__u64 usable_heap_size;
+
+	/**
+	 * Number of bytes allocated in the heap. This includes all processes
+	 * and private allocations in the kernel. It changes when new buffers
+	 * are allocated, freed, and moved. It cannot be larger than
+	 * heap_size.
+	 */
+	__u64 heap_usage;
+
+	/**
+	 * Theoretical possible max. size of buffer which
+	 * could be allocated in the given heap
+	 */
+	__u64 max_allocation;
+};
+
+struct drm_amdgpu_memory_info {
+	struct drm_amdgpu_heap_info vram;
+	struct drm_amdgpu_heap_info cpu_accessible_vram;
+	struct drm_amdgpu_heap_info gtt;
+};
+
+struct drm_amdgpu_info_firmware {
+	__u32 ver;
+	__u32 feature;
+};
+
+struct drm_amdgpu_info_vbios {
+	__u8 name[64];
+	__u8 vbios_pn[64];
+	__u32 version;
+	__u32 pad;
+	__u8 vbios_ver_str[32];
+	__u8 date[32];
+};
+
+#define AMDGPU_VRAM_TYPE_UNKNOWN 0
+#define AMDGPU_VRAM_TYPE_GDDR1 1
+#define AMDGPU_VRAM_TYPE_DDR2  2
+#define AMDGPU_VRAM_TYPE_GDDR3 3
+#define AMDGPU_VRAM_TYPE_GDDR4 4
+#define AMDGPU_VRAM_TYPE_GDDR5 5
+#define AMDGPU_VRAM_TYPE_HBM   6
+#define AMDGPU_VRAM_TYPE_DDR3  7
+#define AMDGPU_VRAM_TYPE_DDR4  8
+#define AMDGPU_VRAM_TYPE_GDDR6 9
+#define AMDGPU_VRAM_TYPE_DDR5  10
+#define AMDGPU_VRAM_TYPE_LPDDR4 11
+#define AMDGPU_VRAM_TYPE_LPDDR5 12
+
+struct drm_amdgpu_info_device {
+	/** PCI Device ID */
+	__u32 device_id;
+	/** Internal chip revision: A0, A1, etc.) */
+	__u32 chip_rev;
+	__u32 external_rev;
+	/** Revision id in PCI Config space */
+	__u32 pci_rev;
+	__u32 family;
+	__u32 num_shader_engines;
+	__u32 num_shader_arrays_per_engine;
+	/* in KHz */
+	__u32 gpu_counter_freq;
+	__u64 max_engine_clock;
+	__u64 max_memory_clock;
+	/* cu information */
+	__u32 cu_active_number;
+	/* NOTE: cu_ao_mask is INVALID, DON'T use it */
+	__u32 cu_ao_mask;
+	__u32 cu_bitmap[4][4];
+	/** Render backend pipe mask. One render backend is CB+DB. */
+	__u32 enabled_rb_pipes_mask;
+	__u32 num_rb_pipes;
+	__u32 num_hw_gfx_contexts;
+	/* PCIe version (the smaller of the GPU and the CPU/motherboard) */
+	__u32 pcie_gen;
+	__u64 ids_flags;
+	/** Starting virtual address for UMDs. */
+	__u64 virtual_address_offset;
+	/** The maximum virtual address */
+	__u64 virtual_address_max;
+	/** Required alignment of virtual addresses. */
+	__u32 virtual_address_alignment;
+	/** Page table entry - fragment size */
+	__u32 pte_fragment_size;
+	__u32 gart_page_size;
+	/** constant engine ram size*/
+	__u32 ce_ram_size;
+	/** video memory type info*/
+	__u32 vram_type;
+	/** video memory bit width*/
+	__u32 vram_bit_width;
+	/* vce harvesting instance */
+	__u32 vce_harvest_config;
+	/* gfx double offchip LDS buffers */
+	__u32 gc_double_offchip_lds_buf;
+	/* NGG Primitive Buffer */
+	__u64 prim_buf_gpu_addr;
+	/* NGG Position Buffer */
+	__u64 pos_buf_gpu_addr;
+	/* NGG Control Sideband */
+	__u64 cntl_sb_buf_gpu_addr;
+	/* NGG Parameter Cache */
+	__u64 param_buf_gpu_addr;
+	__u32 prim_buf_size;
+	__u32 pos_buf_size;
+	__u32 cntl_sb_buf_size;
+	__u32 param_buf_size;
+	/* wavefront size*/
+	__u32 wave_front_size;
+	/* shader visible vgprs*/
+	__u32 num_shader_visible_vgprs;
+	/* CU per shader array*/
+	__u32 num_cu_per_sh;
+	/* number of tcc blocks*/
+	__u32 num_tcc_blocks;
+	/* gs vgt table depth*/
+	__u32 gs_vgt_table_depth;
+	/* gs primitive buffer depth*/
+	__u32 gs_prim_buffer_depth;
+	/* max gs wavefront per vgt*/
+	__u32 max_gs_waves_per_vgt;
+	/* PCIe number of lanes (the smaller of the GPU and the CPU/motherboard) */
+	__u32 pcie_num_lanes;
+	/* always on cu bitmap */
+	__u32 cu_ao_bitmap[4][4];
+	/** Starting high virtual address for UMDs. */
+	__u64 high_va_offset;
+	/** The maximum high virtual address */
+	__u64 high_va_max;
+	/* gfx10 pa_sc_tile_steering_override */
+	__u32 pa_sc_tile_steering_override;
+	/* disabled TCCs */
+	__u64 tcc_disabled_mask;
+	__u64 min_engine_clock;
+	__u64 min_memory_clock;
+	/* The following fields are only set on gfx11+, older chips set 0. */
+	__u32 tcp_cache_size;       /* AKA GL0, VMEM cache */
+	__u32 num_sqc_per_wgp;
+	__u32 sqc_data_cache_size;  /* AKA SMEM cache */
+	__u32 sqc_inst_cache_size;
+	__u32 gl1c_cache_size;
+	__u32 gl2c_cache_size;
+	__u64 mall_size;            /* AKA infinity cache */
+	/* high 32 bits of the rb pipes mask */
+	__u32 enabled_rb_pipes_mask_hi;
+	/* shadow area size for gfx11 */
+	__u32 shadow_size;
+	/* shadow area base virtual alignment for gfx11 */
+	__u32 shadow_alignment;
+	/* context save area size for gfx11 */
+	__u32 csa_size;
+	/* context save area base virtual alignment for gfx11 */
+	__u32 csa_alignment;
+};
+
+struct drm_amdgpu_info_hw_ip {
+	/** Version of h/w IP */
+	__u32  hw_ip_version_major;
+	__u32  hw_ip_version_minor;
+	/** Capabilities */
+	__u64  capabilities_flags;
+	/** command buffer address start alignment*/
+	__u32  ib_start_alignment;
+	/** command buffer size alignment*/
+	__u32  ib_size_alignment;
+	/** Bitmask of available rings. Bit 0 means ring 0, etc. */
+	__u32  available_rings;
+	/** version info: bits 23:16 major, 15:8 minor, 7:0 revision */
+	__u32  ip_discovery_version;
+};
+
+struct drm_amdgpu_info_num_handles {
+	/** Max handles as supported by firmware for UVD */
+	__u32  uvd_max_handles;
+	/** Handles currently in use for UVD */
+	__u32  uvd_used_handles;
+};
+
+#define AMDGPU_VCE_CLOCK_TABLE_ENTRIES		6
+
+struct drm_amdgpu_info_vce_clock_table_entry {
+	/** System clock */
+	__u32 sclk;
+	/** Memory clock */
+	__u32 mclk;
+	/** VCE clock */
+	__u32 eclk;
+	__u32 pad;
+};
+
+struct drm_amdgpu_info_vce_clock_table {
+	struct drm_amdgpu_info_vce_clock_table_entry entries[AMDGPU_VCE_CLOCK_TABLE_ENTRIES];
+	__u32 num_valid_entries;
+	__u32 pad;
+};
+
+/* query video encode/decode caps */
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2			0
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4			1
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1			2
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC		3
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC			4
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG			5
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9			6
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_AV1			7
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_COUNT			8
+
+struct drm_amdgpu_info_video_codec_info {
+	__u32 valid;
+	__u32 max_width;
+	__u32 max_height;
+	__u32 max_pixels_per_frame;
+	__u32 max_level;
+	__u32 pad;
+};
+
+struct drm_amdgpu_info_video_caps {
+	struct drm_amdgpu_info_video_codec_info codec_info[AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_COUNT];
+};
+
+#define AMDGPU_VMHUB_TYPE_MASK			0xff
+#define AMDGPU_VMHUB_TYPE_SHIFT			0
+#define AMDGPU_VMHUB_TYPE_GFX			0
+#define AMDGPU_VMHUB_TYPE_MM0			1
+#define AMDGPU_VMHUB_TYPE_MM1			2
+#define AMDGPU_VMHUB_IDX_MASK			0xff00
+#define AMDGPU_VMHUB_IDX_SHIFT			8
+
+struct drm_amdgpu_info_gpuvm_fault {
+	__u64 addr;
+	__u32 status;
+	__u32 vmhub;
+};
+
+/*
+ * Supported GPU families
+ */
+#define AMDGPU_FAMILY_UNKNOWN			0
+#define AMDGPU_FAMILY_SI			110 /* Hainan, Oland, Verde, Pitcairn, Tahiti */
+#define AMDGPU_FAMILY_CI			120 /* Bonaire, Hawaii */
+#define AMDGPU_FAMILY_KV			125 /* Kaveri, Kabini, Mullins */
+#define AMDGPU_FAMILY_VI			130 /* Iceland, Tonga */
+#define AMDGPU_FAMILY_CZ			135 /* Carrizo, Stoney */
+#define AMDGPU_FAMILY_AI			141 /* Vega10 */
+#define AMDGPU_FAMILY_RV			142 /* Raven */
+#define AMDGPU_FAMILY_NV			143 /* Navi10 */
+#define AMDGPU_FAMILY_VGH			144 /* Van Gogh */
+#define AMDGPU_FAMILY_GC_11_0_0			145 /* GC 11.0.0 */
+#define AMDGPU_FAMILY_YC			146 /* Yellow Carp */
+#define AMDGPU_FAMILY_GC_11_0_1			148 /* GC 11.0.1 */
+#define AMDGPU_FAMILY_GC_10_3_6			149 /* GC 10.3.6 */
+#define AMDGPU_FAMILY_GC_10_3_7			151 /* GC 10.3.7 */
+#define AMDGPU_FAMILY_GC_11_5_0			150 /* GC 11.5.0 */
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
diff --git a/include/drm/drm.h b/include/drm/drm.h
new file mode 100644
index 0000000..4e4f7c2
--- /dev/null
+++ b/include/drm/drm.h
@@ -0,0 +1,1408 @@
+/*
+ * Header for the Direct Rendering Manager
+ *
+ * Author: Rickard E. (Rik) Faith <faith@valinux.com>
+ *
+ * Acknowledgments:
+ * Dec 1999, Richard Henderson <rth@twiddle.net>, move to generic cmpxchg.
+ */
+
+/*
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_H_
+#define _DRM_H_
+
+#if   defined(__linux__)
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+typedef unsigned int drm_handle_t;
+
+#else /* One of the BSDs */
+
+#include <stdint.h>
+#include <sys/ioccom.h>
+#include <sys/types.h>
+typedef int8_t   __s8;
+typedef uint8_t  __u8;
+typedef int16_t  __s16;
+typedef uint16_t __u16;
+typedef int32_t  __s32;
+typedef uint32_t __u32;
+typedef int64_t  __s64;
+typedef uint64_t __u64;
+typedef size_t   __kernel_size_t;
+typedef unsigned long drm_handle_t;
+
+#endif
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#define DRM_NAME	"drm"	  /**< Name in kernel, /dev, and /proc */
+#define DRM_MIN_ORDER	5	  /**< At least 2^5 bytes = 32 bytes */
+#define DRM_MAX_ORDER	22	  /**< Up to 2^22 bytes = 4MB */
+#define DRM_RAM_PERCENT 10	  /**< How much system ram can we lock? */
+
+#define _DRM_LOCK_HELD	0x80000000U /**< Hardware lock is held */
+#define _DRM_LOCK_CONT	0x40000000U /**< Hardware lock is contended */
+#define _DRM_LOCK_IS_HELD(lock)	   ((lock) & _DRM_LOCK_HELD)
+#define _DRM_LOCK_IS_CONT(lock)	   ((lock) & _DRM_LOCK_CONT)
+#define _DRM_LOCKING_CONTEXT(lock) ((lock) & ~(_DRM_LOCK_HELD|_DRM_LOCK_CONT))
+
+typedef unsigned int drm_context_t;
+typedef unsigned int drm_drawable_t;
+typedef unsigned int drm_magic_t;
+
+/*
+ * Cliprect.
+ *
+ * \warning: If you change this structure, make sure you change
+ * XF86DRIClipRectRec in the server as well
+ *
+ * \note KW: Actually it's illegal to change either for
+ * backwards-compatibility reasons.
+ */
+struct drm_clip_rect {
+	unsigned short x1;
+	unsigned short y1;
+	unsigned short x2;
+	unsigned short y2;
+};
+
+/*
+ * Drawable information.
+ */
+struct drm_drawable_info {
+	unsigned int num_rects;
+	struct drm_clip_rect *rects;
+};
+
+/*
+ * Texture region,
+ */
+struct drm_tex_region {
+	unsigned char next;
+	unsigned char prev;
+	unsigned char in_use;
+	unsigned char padding;
+	unsigned int age;
+};
+
+/*
+ * Hardware lock.
+ *
+ * The lock structure is a simple cache-line aligned integer.  To avoid
+ * processor bus contention on a multiprocessor system, there should not be any
+ * other data stored in the same cache line.
+ */
+struct drm_hw_lock {
+	__volatile__ unsigned int lock;		/**< lock variable */
+	char padding[60];			/**< Pad to cache line */
+};
+
+/*
+ * DRM_IOCTL_VERSION ioctl argument type.
+ *
+ * \sa drmGetVersion().
+ */
+struct drm_version {
+	int version_major;	  /**< Major version */
+	int version_minor;	  /**< Minor version */
+	int version_patchlevel;	  /**< Patch level */
+	__kernel_size_t name_len;	  /**< Length of name buffer */
+	char *name;	  /**< Name of driver */
+	__kernel_size_t date_len;	  /**< Length of date buffer */
+	char *date;	  /**< User-space buffer to hold date */
+	__kernel_size_t desc_len;	  /**< Length of desc buffer */
+	char *desc;	  /**< User-space buffer to hold desc */
+};
+
+/*
+ * DRM_IOCTL_GET_UNIQUE ioctl argument type.
+ *
+ * \sa drmGetBusid() and drmSetBusId().
+ */
+struct drm_unique {
+	__kernel_size_t unique_len;	  /**< Length of unique */
+	char *unique;	  /**< Unique name for driver instantiation */
+};
+
+struct drm_list {
+	int count;		  /**< Length of user-space structures */
+	struct drm_version *version;
+};
+
+struct drm_block {
+	int unused;
+};
+
+/*
+ * DRM_IOCTL_CONTROL ioctl argument type.
+ *
+ * \sa drmCtlInstHandler() and drmCtlUninstHandler().
+ */
+struct drm_control {
+	enum {
+		DRM_ADD_COMMAND,
+		DRM_RM_COMMAND,
+		DRM_INST_HANDLER,
+		DRM_UNINST_HANDLER
+	} func;
+	int irq;
+};
+
+/*
+ * Type of memory to map.
+ */
+enum drm_map_type {
+	_DRM_FRAME_BUFFER = 0,	  /**< WC (no caching), no core dump */
+	_DRM_REGISTERS = 1,	  /**< no caching, no core dump */
+	_DRM_SHM = 2,		  /**< shared, cached */
+	_DRM_AGP = 3,		  /**< AGP/GART */
+	_DRM_SCATTER_GATHER = 4,  /**< Scatter/gather memory for PCI DMA */
+	_DRM_CONSISTENT = 5	  /**< Consistent memory for PCI DMA */
+};
+
+/*
+ * Memory mapping flags.
+ */
+enum drm_map_flags {
+	_DRM_RESTRICTED = 0x01,	     /**< Cannot be mapped to user-virtual */
+	_DRM_READ_ONLY = 0x02,
+	_DRM_LOCKED = 0x04,	     /**< shared, cached, locked */
+	_DRM_KERNEL = 0x08,	     /**< kernel requires access */
+	_DRM_WRITE_COMBINING = 0x10, /**< use write-combining if available */
+	_DRM_CONTAINS_LOCK = 0x20,   /**< SHM page that contains lock */
+	_DRM_REMOVABLE = 0x40,	     /**< Removable mapping */
+	_DRM_DRIVER = 0x80	     /**< Managed by driver */
+};
+
+struct drm_ctx_priv_map {
+	unsigned int ctx_id;	 /**< Context requesting private mapping */
+	void *handle;		 /**< Handle of map */
+};
+
+/*
+ * DRM_IOCTL_GET_MAP, DRM_IOCTL_ADD_MAP and DRM_IOCTL_RM_MAP ioctls
+ * argument type.
+ *
+ * \sa drmAddMap().
+ */
+struct drm_map {
+	unsigned long offset;	 /**< Requested physical address (0 for SAREA)*/
+	unsigned long size;	 /**< Requested physical size (bytes) */
+	enum drm_map_type type;	 /**< Type of memory to map */
+	enum drm_map_flags flags;	 /**< Flags */
+	void *handle;		 /**< User-space: "Handle" to pass to mmap() */
+				 /**< Kernel-space: kernel-virtual address */
+	int mtrr;		 /**< MTRR slot used */
+	/*   Private data */
+};
+
+/*
+ * DRM_IOCTL_GET_CLIENT ioctl argument type.
+ */
+struct drm_client {
+	int idx;		/**< Which client desired? */
+	int auth;		/**< Is client authenticated? */
+	unsigned long pid;	/**< Process ID */
+	unsigned long uid;	/**< User ID */
+	unsigned long magic;	/**< Magic */
+	unsigned long iocs;	/**< Ioctl count */
+};
+
+enum drm_stat_type {
+	_DRM_STAT_LOCK,
+	_DRM_STAT_OPENS,
+	_DRM_STAT_CLOSES,
+	_DRM_STAT_IOCTLS,
+	_DRM_STAT_LOCKS,
+	_DRM_STAT_UNLOCKS,
+	_DRM_STAT_VALUE,	/**< Generic value */
+	_DRM_STAT_BYTE,		/**< Generic byte counter (1024bytes/K) */
+	_DRM_STAT_COUNT,	/**< Generic non-byte counter (1000/k) */
+
+	_DRM_STAT_IRQ,		/**< IRQ */
+	_DRM_STAT_PRIMARY,	/**< Primary DMA bytes */
+	_DRM_STAT_SECONDARY,	/**< Secondary DMA bytes */
+	_DRM_STAT_DMA,		/**< DMA */
+	_DRM_STAT_SPECIAL,	/**< Special DMA (e.g., priority or polled) */
+	_DRM_STAT_MISSED	/**< Missed DMA opportunity */
+	    /* Add to the *END* of the list */
+};
+
+/*
+ * DRM_IOCTL_GET_STATS ioctl argument type.
+ */
+struct drm_stats {
+	unsigned long count;
+	struct {
+		unsigned long value;
+		enum drm_stat_type type;
+	} data[15];
+};
+
+/*
+ * Hardware locking flags.
+ */
+enum drm_lock_flags {
+	_DRM_LOCK_READY = 0x01,	     /**< Wait until hardware is ready for DMA */
+	_DRM_LOCK_QUIESCENT = 0x02,  /**< Wait until hardware quiescent */
+	_DRM_LOCK_FLUSH = 0x04,	     /**< Flush this context's DMA queue first */
+	_DRM_LOCK_FLUSH_ALL = 0x08,  /**< Flush all DMA queues first */
+	/* These *HALT* flags aren't supported yet
+	   -- they will be used to support the
+	   full-screen DGA-like mode. */
+	_DRM_HALT_ALL_QUEUES = 0x10, /**< Halt all current and future queues */
+	_DRM_HALT_CUR_QUEUES = 0x20  /**< Halt all current queues */
+};
+
+/*
+ * DRM_IOCTL_LOCK, DRM_IOCTL_UNLOCK and DRM_IOCTL_FINISH ioctl argument type.
+ *
+ * \sa drmGetLock() and drmUnlock().
+ */
+struct drm_lock {
+	int context;
+	enum drm_lock_flags flags;
+};
+
+/*
+ * DMA flags
+ *
+ * \warning
+ * These values \e must match xf86drm.h.
+ *
+ * \sa drm_dma.
+ */
+enum drm_dma_flags {
+	/* Flags for DMA buffer dispatch */
+	_DRM_DMA_BLOCK = 0x01,	      /**<
+				       * Block until buffer dispatched.
+				       *
+				       * \note The buffer may not yet have
+				       * been processed by the hardware --
+				       * getting a hardware lock with the
+				       * hardware quiescent will ensure
+				       * that the buffer has been
+				       * processed.
+				       */
+	_DRM_DMA_WHILE_LOCKED = 0x02, /**< Dispatch while lock held */
+	_DRM_DMA_PRIORITY = 0x04,     /**< High priority dispatch */
+
+	/* Flags for DMA buffer request */
+	_DRM_DMA_WAIT = 0x10,	      /**< Wait for free buffers */
+	_DRM_DMA_SMALLER_OK = 0x20,   /**< Smaller-than-requested buffers OK */
+	_DRM_DMA_LARGER_OK = 0x40     /**< Larger-than-requested buffers OK */
+};
+
+/*
+ * DRM_IOCTL_ADD_BUFS and DRM_IOCTL_MARK_BUFS ioctl argument type.
+ *
+ * \sa drmAddBufs().
+ */
+struct drm_buf_desc {
+	int count;		 /**< Number of buffers of this size */
+	int size;		 /**< Size in bytes */
+	int low_mark;		 /**< Low water mark */
+	int high_mark;		 /**< High water mark */
+	enum {
+		_DRM_PAGE_ALIGN = 0x01,	/**< Align on page boundaries for DMA */
+		_DRM_AGP_BUFFER = 0x02,	/**< Buffer is in AGP space */
+		_DRM_SG_BUFFER = 0x04,	/**< Scatter/gather memory buffer */
+		_DRM_FB_BUFFER = 0x08,	/**< Buffer is in frame buffer */
+		_DRM_PCI_BUFFER_RO = 0x10 /**< Map PCI DMA buffer read-only */
+	} flags;
+	unsigned long agp_start; /**<
+				  * Start address of where the AGP buffers are
+				  * in the AGP aperture
+				  */
+};
+
+/*
+ * DRM_IOCTL_INFO_BUFS ioctl argument type.
+ */
+struct drm_buf_info {
+	int count;		/**< Entries in list */
+	struct drm_buf_desc *list;
+};
+
+/*
+ * DRM_IOCTL_FREE_BUFS ioctl argument type.
+ */
+struct drm_buf_free {
+	int count;
+	int *list;
+};
+
+/*
+ * Buffer information
+ *
+ * \sa drm_buf_map.
+ */
+struct drm_buf_pub {
+	int idx;		       /**< Index into the master buffer list */
+	int total;		       /**< Buffer size */
+	int used;		       /**< Amount of buffer in use (for DMA) */
+	void *address;	       /**< Address of buffer */
+};
+
+/*
+ * DRM_IOCTL_MAP_BUFS ioctl argument type.
+ */
+struct drm_buf_map {
+	int count;		/**< Length of the buffer list */
+#ifdef __cplusplus
+	void *virt;
+#else
+	void *virtual;		/**< Mmap'd area in user-virtual */
+#endif
+	struct drm_buf_pub *list;	/**< Buffer information */
+};
+
+/*
+ * DRM_IOCTL_DMA ioctl argument type.
+ *
+ * Indices here refer to the offset into the buffer list in drm_buf_get.
+ *
+ * \sa drmDMA().
+ */
+struct drm_dma {
+	int context;			  /**< Context handle */
+	int send_count;			  /**< Number of buffers to send */
+	int *send_indices;	  /**< List of handles to buffers */
+	int *send_sizes;		  /**< Lengths of data to send */
+	enum drm_dma_flags flags;	  /**< Flags */
+	int request_count;		  /**< Number of buffers requested */
+	int request_size;		  /**< Desired size for buffers */
+	int *request_indices;	  /**< Buffer information */
+	int *request_sizes;
+	int granted_count;		  /**< Number of buffers granted */
+};
+
+enum drm_ctx_flags {
+	_DRM_CONTEXT_PRESERVED = 0x01,
+	_DRM_CONTEXT_2DONLY = 0x02
+};
+
+/*
+ * DRM_IOCTL_ADD_CTX ioctl argument type.
+ *
+ * \sa drmCreateContext() and drmDestroyContext().
+ */
+struct drm_ctx {
+	drm_context_t handle;
+	enum drm_ctx_flags flags;
+};
+
+/*
+ * DRM_IOCTL_RES_CTX ioctl argument type.
+ */
+struct drm_ctx_res {
+	int count;
+	struct drm_ctx *contexts;
+};
+
+/*
+ * DRM_IOCTL_ADD_DRAW and DRM_IOCTL_RM_DRAW ioctl argument type.
+ */
+struct drm_draw {
+	drm_drawable_t handle;
+};
+
+/*
+ * DRM_IOCTL_UPDATE_DRAW ioctl argument type.
+ */
+typedef enum {
+	DRM_DRAWABLE_CLIPRECTS
+} drm_drawable_info_type_t;
+
+struct drm_update_draw {
+	drm_drawable_t handle;
+	unsigned int type;
+	unsigned int num;
+	unsigned long long data;
+};
+
+/*
+ * DRM_IOCTL_GET_MAGIC and DRM_IOCTL_AUTH_MAGIC ioctl argument type.
+ */
+struct drm_auth {
+	drm_magic_t magic;
+};
+
+/*
+ * DRM_IOCTL_IRQ_BUSID ioctl argument type.
+ *
+ * \sa drmGetInterruptFromBusID().
+ */
+struct drm_irq_busid {
+	int irq;	/**< IRQ number */
+	int busnum;	/**< bus number */
+	int devnum;	/**< device number */
+	int funcnum;	/**< function number */
+};
+
+enum drm_vblank_seq_type {
+	_DRM_VBLANK_ABSOLUTE = 0x0,	/**< Wait for specific vblank sequence number */
+	_DRM_VBLANK_RELATIVE = 0x1,	/**< Wait for given number of vblanks */
+	/* bits 1-6 are reserved for high crtcs */
+	_DRM_VBLANK_HIGH_CRTC_MASK = 0x0000003e,
+	_DRM_VBLANK_EVENT = 0x4000000,   /**< Send event instead of blocking */
+	_DRM_VBLANK_FLIP = 0x8000000,   /**< Scheduled buffer swap should flip */
+	_DRM_VBLANK_NEXTONMISS = 0x10000000,	/**< If missed, wait for next vblank */
+	_DRM_VBLANK_SECONDARY = 0x20000000,	/**< Secondary display controller */
+	_DRM_VBLANK_SIGNAL = 0x40000000	/**< Send signal instead of blocking, unsupported */
+};
+#define _DRM_VBLANK_HIGH_CRTC_SHIFT 1
+
+#define _DRM_VBLANK_TYPES_MASK (_DRM_VBLANK_ABSOLUTE | _DRM_VBLANK_RELATIVE)
+#define _DRM_VBLANK_FLAGS_MASK (_DRM_VBLANK_EVENT | _DRM_VBLANK_SIGNAL | \
+				_DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)
+
+struct drm_wait_vblank_request {
+	enum drm_vblank_seq_type type;
+	unsigned int sequence;
+	unsigned long signal;
+};
+
+struct drm_wait_vblank_reply {
+	enum drm_vblank_seq_type type;
+	unsigned int sequence;
+	long tval_sec;
+	long tval_usec;
+};
+
+/*
+ * DRM_IOCTL_WAIT_VBLANK ioctl argument type.
+ *
+ * \sa drmWaitVBlank().
+ */
+union drm_wait_vblank {
+	struct drm_wait_vblank_request request;
+	struct drm_wait_vblank_reply reply;
+};
+
+#define _DRM_PRE_MODESET 1
+#define _DRM_POST_MODESET 2
+
+/*
+ * DRM_IOCTL_MODESET_CTL ioctl argument type
+ *
+ * \sa drmModesetCtl().
+ */
+struct drm_modeset_ctl {
+	__u32 crtc;
+	__u32 cmd;
+};
+
+/*
+ * DRM_IOCTL_AGP_ENABLE ioctl argument type.
+ *
+ * \sa drmAgpEnable().
+ */
+struct drm_agp_mode {
+	unsigned long mode;	/**< AGP mode */
+};
+
+/*
+ * DRM_IOCTL_AGP_ALLOC and DRM_IOCTL_AGP_FREE ioctls argument type.
+ *
+ * \sa drmAgpAlloc() and drmAgpFree().
+ */
+struct drm_agp_buffer {
+	unsigned long size;	/**< In bytes -- will round to page boundary */
+	unsigned long handle;	/**< Used for binding / unbinding */
+	unsigned long type;	/**< Type of memory to allocate */
+	unsigned long physical;	/**< Physical used by i810 */
+};
+
+/*
+ * DRM_IOCTL_AGP_BIND and DRM_IOCTL_AGP_UNBIND ioctls argument type.
+ *
+ * \sa drmAgpBind() and drmAgpUnbind().
+ */
+struct drm_agp_binding {
+	unsigned long handle;	/**< From drm_agp_buffer */
+	unsigned long offset;	/**< In bytes -- will round to page boundary */
+};
+
+/*
+ * DRM_IOCTL_AGP_INFO ioctl argument type.
+ *
+ * \sa drmAgpVersionMajor(), drmAgpVersionMinor(), drmAgpGetMode(),
+ * drmAgpBase(), drmAgpSize(), drmAgpMemoryUsed(), drmAgpMemoryAvail(),
+ * drmAgpVendorId() and drmAgpDeviceId().
+ */
+struct drm_agp_info {
+	int agp_version_major;
+	int agp_version_minor;
+	unsigned long mode;
+	unsigned long aperture_base;	/* physical address */
+	unsigned long aperture_size;	/* bytes */
+	unsigned long memory_allowed;	/* bytes */
+	unsigned long memory_used;
+
+	/* PCI information */
+	unsigned short id_vendor;
+	unsigned short id_device;
+};
+
+/*
+ * DRM_IOCTL_SG_ALLOC ioctl argument type.
+ */
+struct drm_scatter_gather {
+	unsigned long size;	/**< In bytes -- will round to page boundary */
+	unsigned long handle;	/**< Used for mapping / unmapping */
+};
+
+/*
+ * DRM_IOCTL_SET_VERSION ioctl argument type.
+ */
+struct drm_set_version {
+	int drm_di_major;
+	int drm_di_minor;
+	int drm_dd_major;
+	int drm_dd_minor;
+};
+
+/* DRM_IOCTL_GEM_CLOSE ioctl argument type */
+struct drm_gem_close {
+	/** Handle of the object to be closed. */
+	__u32 handle;
+	__u32 pad;
+};
+
+/* DRM_IOCTL_GEM_FLINK ioctl argument type */
+struct drm_gem_flink {
+	/** Handle for the object being named */
+	__u32 handle;
+
+	/** Returned global name */
+	__u32 name;
+};
+
+/* DRM_IOCTL_GEM_OPEN ioctl argument type */
+struct drm_gem_open {
+	/** Name of object being opened */
+	__u32 name;
+
+	/** Returned handle for the object */
+	__u32 handle;
+
+	/** Returned size of the object */
+	__u64 size;
+};
+
+/**
+ * DRM_CAP_DUMB_BUFFER
+ *
+ * If set to 1, the driver supports creating dumb buffers via the
+ * &DRM_IOCTL_MODE_CREATE_DUMB ioctl.
+ */
+#define DRM_CAP_DUMB_BUFFER		0x1
+/**
+ * DRM_CAP_VBLANK_HIGH_CRTC
+ *
+ * If set to 1, the kernel supports specifying a :ref:`CRTC index<crtc_index>`
+ * in the high bits of &drm_wait_vblank_request.type.
+ *
+ * Starting kernel version 2.6.39, this capability is always set to 1.
+ */
+#define DRM_CAP_VBLANK_HIGH_CRTC	0x2
+/**
+ * DRM_CAP_DUMB_PREFERRED_DEPTH
+ *
+ * The preferred bit depth for dumb buffers.
+ *
+ * The bit depth is the number of bits used to indicate the color of a single
+ * pixel excluding any padding. This is different from the number of bits per
+ * pixel. For instance, XRGB8888 has a bit depth of 24 but has 32 bits per
+ * pixel.
+ *
+ * Note that this preference only applies to dumb buffers, it's irrelevant for
+ * other types of buffers.
+ */
+#define DRM_CAP_DUMB_PREFERRED_DEPTH	0x3
+/**
+ * DRM_CAP_DUMB_PREFER_SHADOW
+ *
+ * If set to 1, the driver prefers userspace to render to a shadow buffer
+ * instead of directly rendering to a dumb buffer. For best speed, userspace
+ * should do streaming ordered memory copies into the dumb buffer and never
+ * read from it.
+ *
+ * Note that this preference only applies to dumb buffers, it's irrelevant for
+ * other types of buffers.
+ */
+#define DRM_CAP_DUMB_PREFER_SHADOW	0x4
+/**
+ * DRM_CAP_PRIME
+ *
+ * Bitfield of supported PRIME sharing capabilities. See &DRM_PRIME_CAP_IMPORT
+ * and &DRM_PRIME_CAP_EXPORT.
+ *
+ * Starting from kernel version 6.6, both &DRM_PRIME_CAP_IMPORT and
+ * &DRM_PRIME_CAP_EXPORT are always advertised.
+ *
+ * PRIME buffers are exposed as dma-buf file descriptors.
+ * See :ref:`prime_buffer_sharing`.
+ */
+#define DRM_CAP_PRIME			0x5
+/**
+ * DRM_PRIME_CAP_IMPORT
+ *
+ * If this bit is set in &DRM_CAP_PRIME, the driver supports importing PRIME
+ * buffers via the &DRM_IOCTL_PRIME_FD_TO_HANDLE ioctl.
+ *
+ * Starting from kernel version 6.6, this bit is always set in &DRM_CAP_PRIME.
+ */
+#define  DRM_PRIME_CAP_IMPORT		0x1
+/**
+ * DRM_PRIME_CAP_EXPORT
+ *
+ * If this bit is set in &DRM_CAP_PRIME, the driver supports exporting PRIME
+ * buffers via the &DRM_IOCTL_PRIME_HANDLE_TO_FD ioctl.
+ *
+ * Starting from kernel version 6.6, this bit is always set in &DRM_CAP_PRIME.
+ */
+#define  DRM_PRIME_CAP_EXPORT		0x2
+/**
+ * DRM_CAP_TIMESTAMP_MONOTONIC
+ *
+ * If set to 0, the kernel will report timestamps with ``CLOCK_REALTIME`` in
+ * struct drm_event_vblank. If set to 1, the kernel will report timestamps with
+ * ``CLOCK_MONOTONIC``. See ``clock_gettime(2)`` for the definition of these
+ * clocks.
+ *
+ * Starting from kernel version 2.6.39, the default value for this capability
+ * is 1. Starting kernel version 4.15, this capability is always set to 1.
+ */
+#define DRM_CAP_TIMESTAMP_MONOTONIC	0x6
+/**
+ * DRM_CAP_ASYNC_PAGE_FLIP
+ *
+ * If set to 1, the driver supports &DRM_MODE_PAGE_FLIP_ASYNC for legacy
+ * page-flips.
+ */
+#define DRM_CAP_ASYNC_PAGE_FLIP		0x7
+/**
+ * DRM_CAP_CURSOR_WIDTH
+ *
+ * The ``CURSOR_WIDTH`` and ``CURSOR_HEIGHT`` capabilities return a valid
+ * width x height combination for the hardware cursor. The intention is that a
+ * hardware agnostic userspace can query a cursor plane size to use.
+ *
+ * Note that the cross-driver contract is to merely return a valid size;
+ * drivers are free to attach another meaning on top, eg. i915 returns the
+ * maximum plane size.
+ */
+#define DRM_CAP_CURSOR_WIDTH		0x8
+/**
+ * DRM_CAP_CURSOR_HEIGHT
+ *
+ * See &DRM_CAP_CURSOR_WIDTH.
+ */
+#define DRM_CAP_CURSOR_HEIGHT		0x9
+/**
+ * DRM_CAP_ADDFB2_MODIFIERS
+ *
+ * If set to 1, the driver supports supplying modifiers in the
+ * &DRM_IOCTL_MODE_ADDFB2 ioctl.
+ */
+#define DRM_CAP_ADDFB2_MODIFIERS	0x10
+/**
+ * DRM_CAP_PAGE_FLIP_TARGET
+ *
+ * If set to 1, the driver supports the &DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE and
+ * &DRM_MODE_PAGE_FLIP_TARGET_RELATIVE flags in
+ * &drm_mode_crtc_page_flip_target.flags for the &DRM_IOCTL_MODE_PAGE_FLIP
+ * ioctl.
+ */
+#define DRM_CAP_PAGE_FLIP_TARGET	0x11
+/**
+ * DRM_CAP_CRTC_IN_VBLANK_EVENT
+ *
+ * If set to 1, the kernel supports reporting the CRTC ID in
+ * &drm_event_vblank.crtc_id for the &DRM_EVENT_VBLANK and
+ * &DRM_EVENT_FLIP_COMPLETE events.
+ *
+ * Starting kernel version 4.12, this capability is always set to 1.
+ */
+#define DRM_CAP_CRTC_IN_VBLANK_EVENT	0x12
+/**
+ * DRM_CAP_SYNCOBJ
+ *
+ * If set to 1, the driver supports sync objects. See :ref:`drm_sync_objects`.
+ */
+#define DRM_CAP_SYNCOBJ		0x13
+/**
+ * DRM_CAP_SYNCOBJ_TIMELINE
+ *
+ * If set to 1, the driver supports timeline operations on sync objects. See
+ * :ref:`drm_sync_objects`.
+ */
+#define DRM_CAP_SYNCOBJ_TIMELINE	0x14
+/**
+ * DRM_CAP_ATOMIC_ASYNC_PAGE_FLIP
+ *
+ * If set to 1, the driver supports &DRM_MODE_PAGE_FLIP_ASYNC for atomic
+ * commits.
+ */
+#define DRM_CAP_ATOMIC_ASYNC_PAGE_FLIP	0x15
+
+/* DRM_IOCTL_GET_CAP ioctl argument type */
+struct drm_get_cap {
+	__u64 capability;
+	__u64 value;
+};
+
+/**
+ * DRM_CLIENT_CAP_STEREO_3D
+ *
+ * If set to 1, the DRM core will expose the stereo 3D capabilities of the
+ * monitor by advertising the supported 3D layouts in the flags of struct
+ * drm_mode_modeinfo. See ``DRM_MODE_FLAG_3D_*``.
+ *
+ * This capability is always supported for all drivers starting from kernel
+ * version 3.13.
+ */
+#define DRM_CLIENT_CAP_STEREO_3D	1
+
+/**
+ * DRM_CLIENT_CAP_UNIVERSAL_PLANES
+ *
+ * If set to 1, the DRM core will expose all planes (overlay, primary, and
+ * cursor) to userspace.
+ *
+ * This capability has been introduced in kernel version 3.15. Starting from
+ * kernel version 3.17, this capability is always supported for all drivers.
+ */
+#define DRM_CLIENT_CAP_UNIVERSAL_PLANES  2
+
+/**
+ * DRM_CLIENT_CAP_ATOMIC
+ *
+ * If set to 1, the DRM core will expose atomic properties to userspace. This
+ * implicitly enables &DRM_CLIENT_CAP_UNIVERSAL_PLANES and
+ * &DRM_CLIENT_CAP_ASPECT_RATIO.
+ *
+ * If the driver doesn't support atomic mode-setting, enabling this capability
+ * will fail with -EOPNOTSUPP.
+ *
+ * This capability has been introduced in kernel version 4.0. Starting from
+ * kernel version 4.2, this capability is always supported for atomic-capable
+ * drivers.
+ */
+#define DRM_CLIENT_CAP_ATOMIC	3
+
+/**
+ * DRM_CLIENT_CAP_ASPECT_RATIO
+ *
+ * If set to 1, the DRM core will provide aspect ratio information in modes.
+ * See ``DRM_MODE_FLAG_PIC_AR_*``.
+ *
+ * This capability is always supported for all drivers starting from kernel
+ * version 4.18.
+ */
+#define DRM_CLIENT_CAP_ASPECT_RATIO    4
+
+/**
+ * DRM_CLIENT_CAP_WRITEBACK_CONNECTORS
+ *
+ * If set to 1, the DRM core will expose special connectors to be used for
+ * writing back to memory the scene setup in the commit. The client must enable
+ * &DRM_CLIENT_CAP_ATOMIC first.
+ *
+ * This capability is always supported for atomic-capable drivers starting from
+ * kernel version 4.19.
+ */
+#define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS	5
+
+/**
+ * DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT
+ *
+ * Drivers for para-virtualized hardware (e.g. vmwgfx, qxl, virtio and
+ * virtualbox) have additional restrictions for cursor planes (thus
+ * making cursor planes on those drivers not truly universal,) e.g.
+ * they need cursor planes to act like one would expect from a mouse
+ * cursor and have correctly set hotspot properties.
+ * If this client cap is not set the DRM core will hide cursor plane on
+ * those virtualized drivers because not setting it implies that the
+ * client is not capable of dealing with those extra restictions.
+ * Clients which do set cursor hotspot and treat the cursor plane
+ * like a mouse cursor should set this property.
+ * The client must enable &DRM_CLIENT_CAP_ATOMIC first.
+ *
+ * Setting this property on drivers which do not special case
+ * cursor planes (i.e. non-virtualized drivers) will return
+ * EOPNOTSUPP, which can be used by userspace to gauge
+ * requirements of the hardware/drivers they're running on.
+ *
+ * This capability is always supported for atomic-capable virtualized
+ * drivers starting from kernel version 6.6.
+ */
+#define DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT	6
+
+/* DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */
+struct drm_set_client_cap {
+	__u64 capability;
+	__u64 value;
+};
+
+#define DRM_RDWR O_RDWR
+#define DRM_CLOEXEC O_CLOEXEC
+struct drm_prime_handle {
+	__u32 handle;
+
+	/** Flags.. only applicable for handle->fd */
+	__u32 flags;
+
+	/** Returned dmabuf file descriptor */
+	__s32 fd;
+};
+
+struct drm_syncobj_create {
+	__u32 handle;
+#define DRM_SYNCOBJ_CREATE_SIGNALED (1 << 0)
+	__u32 flags;
+};
+
+struct drm_syncobj_destroy {
+	__u32 handle;
+	__u32 pad;
+};
+
+#define DRM_SYNCOBJ_FD_TO_HANDLE_FLAGS_IMPORT_SYNC_FILE (1 << 0)
+#define DRM_SYNCOBJ_HANDLE_TO_FD_FLAGS_EXPORT_SYNC_FILE (1 << 0)
+struct drm_syncobj_handle {
+	__u32 handle;
+	__u32 flags;
+
+	__s32 fd;
+	__u32 pad;
+};
+
+struct drm_syncobj_transfer {
+	__u32 src_handle;
+	__u32 dst_handle;
+	__u64 src_point;
+	__u64 dst_point;
+	__u32 flags;
+	__u32 pad;
+};
+
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_ALL (1 << 0)
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT (1 << 1)
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE (1 << 2) /* wait for time point to become available */
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_DEADLINE (1 << 3) /* set fence deadline to deadline_nsec */
+struct drm_syncobj_wait {
+	__u64 handles;
+	/* absolute timeout */
+	__s64 timeout_nsec;
+	__u32 count_handles;
+	__u32 flags;
+	__u32 first_signaled; /* only valid when not waiting all */
+	__u32 pad;
+	/**
+	 * @deadline_nsec - fence deadline hint
+	 *
+	 * Deadline hint, in absolute CLOCK_MONOTONIC, to set on backing
+	 * fence(s) if the DRM_SYNCOBJ_WAIT_FLAGS_WAIT_DEADLINE flag is
+	 * set.
+	 */
+	__u64 deadline_nsec;
+};
+
+struct drm_syncobj_timeline_wait {
+	__u64 handles;
+	/* wait on specific timeline point for every handles*/
+	__u64 points;
+	/* absolute timeout */
+	__s64 timeout_nsec;
+	__u32 count_handles;
+	__u32 flags;
+	__u32 first_signaled; /* only valid when not waiting all */
+	__u32 pad;
+	/**
+	 * @deadline_nsec - fence deadline hint
+	 *
+	 * Deadline hint, in absolute CLOCK_MONOTONIC, to set on backing
+	 * fence(s) if the DRM_SYNCOBJ_WAIT_FLAGS_WAIT_DEADLINE flag is
+	 * set.
+	 */
+	__u64 deadline_nsec;
+};
+
+/**
+ * struct drm_syncobj_eventfd
+ * @handle: syncobj handle.
+ * @flags: Zero to wait for the point to be signalled, or
+ *         &DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE to wait for a fence to be
+ *         available for the point.
+ * @point: syncobj timeline point (set to zero for binary syncobjs).
+ * @fd: Existing eventfd to sent events to.
+ * @pad: Must be zero.
+ *
+ * Register an eventfd to be signalled by a syncobj. The eventfd counter will
+ * be incremented by one.
+ */
+struct drm_syncobj_eventfd {
+	__u32 handle;
+	__u32 flags;
+	__u64 point;
+	__s32 fd;
+	__u32 pad;
+};
+
+
+struct drm_syncobj_array {
+	__u64 handles;
+	__u32 count_handles;
+	__u32 pad;
+};
+
+#define DRM_SYNCOBJ_QUERY_FLAGS_LAST_SUBMITTED (1 << 0) /* last available point on timeline syncobj */
+struct drm_syncobj_timeline_array {
+	__u64 handles;
+	__u64 points;
+	__u32 count_handles;
+	__u32 flags;
+};
+
+
+/* Query current scanout sequence number */
+struct drm_crtc_get_sequence {
+	__u32 crtc_id;		/* requested crtc_id */
+	__u32 active;		/* return: crtc output is active */
+	__u64 sequence;		/* return: most recent vblank sequence */
+	__s64 sequence_ns;	/* return: most recent time of first pixel out */
+};
+
+/* Queue event to be delivered at specified sequence. Time stamp marks
+ * when the first pixel of the refresh cycle leaves the display engine
+ * for the display
+ */
+#define DRM_CRTC_SEQUENCE_RELATIVE		0x00000001	/* sequence is relative to current */
+#define DRM_CRTC_SEQUENCE_NEXT_ON_MISS		0x00000002	/* Use next sequence if we've missed */
+
+struct drm_crtc_queue_sequence {
+	__u32 crtc_id;
+	__u32 flags;
+	__u64 sequence;		/* on input, target sequence. on output, actual sequence */
+	__u64 user_data;	/* user data passed to event */
+};
+
+#if defined(__cplusplus)
+}
+#endif
+
+#include "drm_mode.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#define DRM_IOCTL_BASE			'd'
+#define DRM_IO(nr)			_IO(DRM_IOCTL_BASE,nr)
+#define DRM_IOR(nr,type)		_IOR(DRM_IOCTL_BASE,nr,type)
+#define DRM_IOW(nr,type)		_IOW(DRM_IOCTL_BASE,nr,type)
+#define DRM_IOWR(nr,type)		_IOWR(DRM_IOCTL_BASE,nr,type)
+
+#define DRM_IOCTL_VERSION		DRM_IOWR(0x00, struct drm_version)
+#define DRM_IOCTL_GET_UNIQUE		DRM_IOWR(0x01, struct drm_unique)
+#define DRM_IOCTL_GET_MAGIC		DRM_IOR( 0x02, struct drm_auth)
+#define DRM_IOCTL_IRQ_BUSID		DRM_IOWR(0x03, struct drm_irq_busid)
+#define DRM_IOCTL_GET_MAP               DRM_IOWR(0x04, struct drm_map)
+#define DRM_IOCTL_GET_CLIENT            DRM_IOWR(0x05, struct drm_client)
+#define DRM_IOCTL_GET_STATS             DRM_IOR( 0x06, struct drm_stats)
+#define DRM_IOCTL_SET_VERSION		DRM_IOWR(0x07, struct drm_set_version)
+#define DRM_IOCTL_MODESET_CTL           DRM_IOW(0x08, struct drm_modeset_ctl)
+/**
+ * DRM_IOCTL_GEM_CLOSE - Close a GEM handle.
+ *
+ * GEM handles are not reference-counted by the kernel. User-space is
+ * responsible for managing their lifetime. For example, if user-space imports
+ * the same memory object twice on the same DRM file description, the same GEM
+ * handle is returned by both imports, and user-space needs to ensure
+ * &DRM_IOCTL_GEM_CLOSE is performed once only. The same situation can happen
+ * when a memory object is allocated, then exported and imported again on the
+ * same DRM file description. The &DRM_IOCTL_MODE_GETFB2 IOCTL is an exception
+ * and always returns fresh new GEM handles even if an existing GEM handle
+ * already refers to the same memory object before the IOCTL is performed.
+ */
+#define DRM_IOCTL_GEM_CLOSE		DRM_IOW (0x09, struct drm_gem_close)
+#define DRM_IOCTL_GEM_FLINK		DRM_IOWR(0x0a, struct drm_gem_flink)
+#define DRM_IOCTL_GEM_OPEN		DRM_IOWR(0x0b, struct drm_gem_open)
+#define DRM_IOCTL_GET_CAP		DRM_IOWR(0x0c, struct drm_get_cap)
+#define DRM_IOCTL_SET_CLIENT_CAP	DRM_IOW( 0x0d, struct drm_set_client_cap)
+
+#define DRM_IOCTL_SET_UNIQUE		DRM_IOW( 0x10, struct drm_unique)
+#define DRM_IOCTL_AUTH_MAGIC		DRM_IOW( 0x11, struct drm_auth)
+#define DRM_IOCTL_BLOCK			DRM_IOWR(0x12, struct drm_block)
+#define DRM_IOCTL_UNBLOCK		DRM_IOWR(0x13, struct drm_block)
+#define DRM_IOCTL_CONTROL		DRM_IOW( 0x14, struct drm_control)
+#define DRM_IOCTL_ADD_MAP		DRM_IOWR(0x15, struct drm_map)
+#define DRM_IOCTL_ADD_BUFS		DRM_IOWR(0x16, struct drm_buf_desc)
+#define DRM_IOCTL_MARK_BUFS		DRM_IOW( 0x17, struct drm_buf_desc)
+#define DRM_IOCTL_INFO_BUFS		DRM_IOWR(0x18, struct drm_buf_info)
+#define DRM_IOCTL_MAP_BUFS		DRM_IOWR(0x19, struct drm_buf_map)
+#define DRM_IOCTL_FREE_BUFS		DRM_IOW( 0x1a, struct drm_buf_free)
+
+#define DRM_IOCTL_RM_MAP		DRM_IOW( 0x1b, struct drm_map)
+
+#define DRM_IOCTL_SET_SAREA_CTX		DRM_IOW( 0x1c, struct drm_ctx_priv_map)
+#define DRM_IOCTL_GET_SAREA_CTX 	DRM_IOWR(0x1d, struct drm_ctx_priv_map)
+
+#define DRM_IOCTL_SET_MASTER            DRM_IO(0x1e)
+#define DRM_IOCTL_DROP_MASTER           DRM_IO(0x1f)
+
+#define DRM_IOCTL_ADD_CTX		DRM_IOWR(0x20, struct drm_ctx)
+#define DRM_IOCTL_RM_CTX		DRM_IOWR(0x21, struct drm_ctx)
+#define DRM_IOCTL_MOD_CTX		DRM_IOW( 0x22, struct drm_ctx)
+#define DRM_IOCTL_GET_CTX		DRM_IOWR(0x23, struct drm_ctx)
+#define DRM_IOCTL_SWITCH_CTX		DRM_IOW( 0x24, struct drm_ctx)
+#define DRM_IOCTL_NEW_CTX		DRM_IOW( 0x25, struct drm_ctx)
+#define DRM_IOCTL_RES_CTX		DRM_IOWR(0x26, struct drm_ctx_res)
+#define DRM_IOCTL_ADD_DRAW		DRM_IOWR(0x27, struct drm_draw)
+#define DRM_IOCTL_RM_DRAW		DRM_IOWR(0x28, struct drm_draw)
+#define DRM_IOCTL_DMA			DRM_IOWR(0x29, struct drm_dma)
+#define DRM_IOCTL_LOCK			DRM_IOW( 0x2a, struct drm_lock)
+#define DRM_IOCTL_UNLOCK		DRM_IOW( 0x2b, struct drm_lock)
+#define DRM_IOCTL_FINISH		DRM_IOW( 0x2c, struct drm_lock)
+
+/**
+ * DRM_IOCTL_PRIME_HANDLE_TO_FD - Convert a GEM handle to a DMA-BUF FD.
+ *
+ * User-space sets &drm_prime_handle.handle with the GEM handle to export and
+ * &drm_prime_handle.flags, and gets back a DMA-BUF file descriptor in
+ * &drm_prime_handle.fd.
+ *
+ * The export can fail for any driver-specific reason, e.g. because export is
+ * not supported for this specific GEM handle (but might be for others).
+ *
+ * Support for exporting DMA-BUFs is advertised via &DRM_PRIME_CAP_EXPORT.
+ */
+#define DRM_IOCTL_PRIME_HANDLE_TO_FD    DRM_IOWR(0x2d, struct drm_prime_handle)
+/**
+ * DRM_IOCTL_PRIME_FD_TO_HANDLE - Convert a DMA-BUF FD to a GEM handle.
+ *
+ * User-space sets &drm_prime_handle.fd with a DMA-BUF file descriptor to
+ * import, and gets back a GEM handle in &drm_prime_handle.handle.
+ * &drm_prime_handle.flags is unused.
+ *
+ * If an existing GEM handle refers to the memory object backing the DMA-BUF,
+ * that GEM handle is returned. Therefore user-space which needs to handle
+ * arbitrary DMA-BUFs must have a user-space lookup data structure to manually
+ * reference-count duplicated GEM handles. For more information see
+ * &DRM_IOCTL_GEM_CLOSE.
+ *
+ * The import can fail for any driver-specific reason, e.g. because import is
+ * only supported for DMA-BUFs allocated on this DRM device.
+ *
+ * Support for importing DMA-BUFs is advertised via &DRM_PRIME_CAP_IMPORT.
+ */
+#define DRM_IOCTL_PRIME_FD_TO_HANDLE    DRM_IOWR(0x2e, struct drm_prime_handle)
+
+#define DRM_IOCTL_AGP_ACQUIRE		DRM_IO(  0x30)
+#define DRM_IOCTL_AGP_RELEASE		DRM_IO(  0x31)
+#define DRM_IOCTL_AGP_ENABLE		DRM_IOW( 0x32, struct drm_agp_mode)
+#define DRM_IOCTL_AGP_INFO		DRM_IOR( 0x33, struct drm_agp_info)
+#define DRM_IOCTL_AGP_ALLOC		DRM_IOWR(0x34, struct drm_agp_buffer)
+#define DRM_IOCTL_AGP_FREE		DRM_IOW( 0x35, struct drm_agp_buffer)
+#define DRM_IOCTL_AGP_BIND		DRM_IOW( 0x36, struct drm_agp_binding)
+#define DRM_IOCTL_AGP_UNBIND		DRM_IOW( 0x37, struct drm_agp_binding)
+
+#define DRM_IOCTL_SG_ALLOC		DRM_IOWR(0x38, struct drm_scatter_gather)
+#define DRM_IOCTL_SG_FREE		DRM_IOW( 0x39, struct drm_scatter_gather)
+
+#define DRM_IOCTL_WAIT_VBLANK		DRM_IOWR(0x3a, union drm_wait_vblank)
+
+#define DRM_IOCTL_CRTC_GET_SEQUENCE	DRM_IOWR(0x3b, struct drm_crtc_get_sequence)
+#define DRM_IOCTL_CRTC_QUEUE_SEQUENCE	DRM_IOWR(0x3c, struct drm_crtc_queue_sequence)
+
+#define DRM_IOCTL_UPDATE_DRAW		DRM_IOW(0x3f, struct drm_update_draw)
+
+#define DRM_IOCTL_MODE_GETRESOURCES	DRM_IOWR(0xA0, struct drm_mode_card_res)
+#define DRM_IOCTL_MODE_GETCRTC		DRM_IOWR(0xA1, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_SETCRTC		DRM_IOWR(0xA2, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_CURSOR		DRM_IOWR(0xA3, struct drm_mode_cursor)
+#define DRM_IOCTL_MODE_GETGAMMA		DRM_IOWR(0xA4, struct drm_mode_crtc_lut)
+#define DRM_IOCTL_MODE_SETGAMMA		DRM_IOWR(0xA5, struct drm_mode_crtc_lut)
+#define DRM_IOCTL_MODE_GETENCODER	DRM_IOWR(0xA6, struct drm_mode_get_encoder)
+#define DRM_IOCTL_MODE_GETCONNECTOR	DRM_IOWR(0xA7, struct drm_mode_get_connector)
+#define DRM_IOCTL_MODE_ATTACHMODE	DRM_IOWR(0xA8, struct drm_mode_mode_cmd) /* deprecated (never worked) */
+#define DRM_IOCTL_MODE_DETACHMODE	DRM_IOWR(0xA9, struct drm_mode_mode_cmd) /* deprecated (never worked) */
+
+#define DRM_IOCTL_MODE_GETPROPERTY	DRM_IOWR(0xAA, struct drm_mode_get_property)
+#define DRM_IOCTL_MODE_SETPROPERTY	DRM_IOWR(0xAB, struct drm_mode_connector_set_property)
+#define DRM_IOCTL_MODE_GETPROPBLOB	DRM_IOWR(0xAC, struct drm_mode_get_blob)
+#define DRM_IOCTL_MODE_GETFB		DRM_IOWR(0xAD, struct drm_mode_fb_cmd)
+#define DRM_IOCTL_MODE_ADDFB		DRM_IOWR(0xAE, struct drm_mode_fb_cmd)
+/**
+ * DRM_IOCTL_MODE_RMFB - Remove a framebuffer.
+ *
+ * This removes a framebuffer previously added via ADDFB/ADDFB2. The IOCTL
+ * argument is a framebuffer object ID.
+ *
+ * Warning: removing a framebuffer currently in-use on an enabled plane will
+ * disable that plane. The CRTC the plane is linked to may also be disabled
+ * (depending on driver capabilities).
+ */
+#define DRM_IOCTL_MODE_RMFB		DRM_IOWR(0xAF, unsigned int)
+#define DRM_IOCTL_MODE_PAGE_FLIP	DRM_IOWR(0xB0, struct drm_mode_crtc_page_flip)
+#define DRM_IOCTL_MODE_DIRTYFB		DRM_IOWR(0xB1, struct drm_mode_fb_dirty_cmd)
+
+/**
+ * DRM_IOCTL_MODE_CREATE_DUMB - Create a new dumb buffer object.
+ *
+ * KMS dumb buffers provide a very primitive way to allocate a buffer object
+ * suitable for scanout and map it for software rendering. KMS dumb buffers are
+ * not suitable for hardware-accelerated rendering nor video decoding. KMS dumb
+ * buffers are not suitable to be displayed on any other device than the KMS
+ * device where they were allocated from. Also see
+ * :ref:`kms_dumb_buffer_objects`.
+ *
+ * The IOCTL argument is a struct drm_mode_create_dumb.
+ *
+ * User-space is expected to create a KMS dumb buffer via this IOCTL, then add
+ * it as a KMS framebuffer via &DRM_IOCTL_MODE_ADDFB and map it via
+ * &DRM_IOCTL_MODE_MAP_DUMB.
+ *
+ * &DRM_CAP_DUMB_BUFFER indicates whether this IOCTL is supported.
+ * &DRM_CAP_DUMB_PREFERRED_DEPTH and &DRM_CAP_DUMB_PREFER_SHADOW indicate
+ * driver preferences for dumb buffers.
+ */
+#define DRM_IOCTL_MODE_CREATE_DUMB DRM_IOWR(0xB2, struct drm_mode_create_dumb)
+#define DRM_IOCTL_MODE_MAP_DUMB    DRM_IOWR(0xB3, struct drm_mode_map_dumb)
+#define DRM_IOCTL_MODE_DESTROY_DUMB    DRM_IOWR(0xB4, struct drm_mode_destroy_dumb)
+#define DRM_IOCTL_MODE_GETPLANERESOURCES DRM_IOWR(0xB5, struct drm_mode_get_plane_res)
+#define DRM_IOCTL_MODE_GETPLANE	DRM_IOWR(0xB6, struct drm_mode_get_plane)
+#define DRM_IOCTL_MODE_SETPLANE	DRM_IOWR(0xB7, struct drm_mode_set_plane)
+#define DRM_IOCTL_MODE_ADDFB2		DRM_IOWR(0xB8, struct drm_mode_fb_cmd2)
+#define DRM_IOCTL_MODE_OBJ_GETPROPERTIES	DRM_IOWR(0xB9, struct drm_mode_obj_get_properties)
+#define DRM_IOCTL_MODE_OBJ_SETPROPERTY	DRM_IOWR(0xBA, struct drm_mode_obj_set_property)
+#define DRM_IOCTL_MODE_CURSOR2		DRM_IOWR(0xBB, struct drm_mode_cursor2)
+#define DRM_IOCTL_MODE_ATOMIC		DRM_IOWR(0xBC, struct drm_mode_atomic)
+#define DRM_IOCTL_MODE_CREATEPROPBLOB	DRM_IOWR(0xBD, struct drm_mode_create_blob)
+#define DRM_IOCTL_MODE_DESTROYPROPBLOB	DRM_IOWR(0xBE, struct drm_mode_destroy_blob)
+
+#define DRM_IOCTL_SYNCOBJ_CREATE	DRM_IOWR(0xBF, struct drm_syncobj_create)
+#define DRM_IOCTL_SYNCOBJ_DESTROY	DRM_IOWR(0xC0, struct drm_syncobj_destroy)
+#define DRM_IOCTL_SYNCOBJ_HANDLE_TO_FD	DRM_IOWR(0xC1, struct drm_syncobj_handle)
+#define DRM_IOCTL_SYNCOBJ_FD_TO_HANDLE	DRM_IOWR(0xC2, struct drm_syncobj_handle)
+#define DRM_IOCTL_SYNCOBJ_WAIT		DRM_IOWR(0xC3, struct drm_syncobj_wait)
+#define DRM_IOCTL_SYNCOBJ_RESET		DRM_IOWR(0xC4, struct drm_syncobj_array)
+#define DRM_IOCTL_SYNCOBJ_SIGNAL	DRM_IOWR(0xC5, struct drm_syncobj_array)
+
+#define DRM_IOCTL_MODE_CREATE_LEASE	DRM_IOWR(0xC6, struct drm_mode_create_lease)
+#define DRM_IOCTL_MODE_LIST_LESSEES	DRM_IOWR(0xC7, struct drm_mode_list_lessees)
+#define DRM_IOCTL_MODE_GET_LEASE	DRM_IOWR(0xC8, struct drm_mode_get_lease)
+#define DRM_IOCTL_MODE_REVOKE_LEASE	DRM_IOWR(0xC9, struct drm_mode_revoke_lease)
+
+#define DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT	DRM_IOWR(0xCA, struct drm_syncobj_timeline_wait)
+#define DRM_IOCTL_SYNCOBJ_QUERY		DRM_IOWR(0xCB, struct drm_syncobj_timeline_array)
+#define DRM_IOCTL_SYNCOBJ_TRANSFER	DRM_IOWR(0xCC, struct drm_syncobj_transfer)
+#define DRM_IOCTL_SYNCOBJ_TIMELINE_SIGNAL	DRM_IOWR(0xCD, struct drm_syncobj_timeline_array)
+
+/**
+ * DRM_IOCTL_MODE_GETFB2 - Get framebuffer metadata.
+ *
+ * This queries metadata about a framebuffer. User-space fills
+ * &drm_mode_fb_cmd2.fb_id as the input, and the kernels fills the rest of the
+ * struct as the output.
+ *
+ * If the client is DRM master or has &CAP_SYS_ADMIN, &drm_mode_fb_cmd2.handles
+ * will be filled with GEM buffer handles. Fresh new GEM handles are always
+ * returned, even if another GEM handle referring to the same memory object
+ * already exists on the DRM file description. The caller is responsible for
+ * removing the new handles, e.g. via the &DRM_IOCTL_GEM_CLOSE IOCTL. The same
+ * new handle will be returned for multiple planes in case they use the same
+ * memory object. Planes are valid until one has a zero handle -- this can be
+ * used to compute the number of planes.
+ *
+ * Otherwise, &drm_mode_fb_cmd2.handles will be zeroed and planes are valid
+ * until one has a zero &drm_mode_fb_cmd2.pitches.
+ *
+ * If the framebuffer has a format modifier, &DRM_MODE_FB_MODIFIERS will be set
+ * in &drm_mode_fb_cmd2.flags and &drm_mode_fb_cmd2.modifier will contain the
+ * modifier. Otherwise, user-space must ignore &drm_mode_fb_cmd2.modifier.
+ *
+ * To obtain DMA-BUF FDs for each plane without leaking GEM handles, user-space
+ * can export each handle via &DRM_IOCTL_PRIME_HANDLE_TO_FD, then immediately
+ * close each unique handle via &DRM_IOCTL_GEM_CLOSE, making sure to not
+ * double-close handles which are specified multiple times in the array.
+ */
+#define DRM_IOCTL_MODE_GETFB2		DRM_IOWR(0xCE, struct drm_mode_fb_cmd2)
+
+#define DRM_IOCTL_SYNCOBJ_EVENTFD	DRM_IOWR(0xCF, struct drm_syncobj_eventfd)
+
+/**
+ * DRM_IOCTL_MODE_CLOSEFB - Close a framebuffer.
+ *
+ * This closes a framebuffer previously added via ADDFB/ADDFB2. The IOCTL
+ * argument is a framebuffer object ID.
+ *
+ * This IOCTL is similar to &DRM_IOCTL_MODE_RMFB, except it doesn't disable
+ * planes and CRTCs. As long as the framebuffer is used by a plane, it's kept
+ * alive. When the plane no longer uses the framebuffer (because the
+ * framebuffer is replaced with another one, or the plane is disabled), the
+ * framebuffer is cleaned up.
+ *
+ * This is useful to implement flicker-free transitions between two processes.
+ *
+ * Depending on the threat model, user-space may want to ensure that the
+ * framebuffer doesn't expose any sensitive user information: closed
+ * framebuffers attached to a plane can be read back by the next DRM master.
+ */
+#define DRM_IOCTL_MODE_CLOSEFB		DRM_IOWR(0xD0, struct drm_mode_closefb)
+
+/*
+ * Device specific ioctls should only be in their respective headers
+ * The device specific ioctl range is from 0x40 to 0x9f.
+ * Generic IOCTLS restart at 0xA0.
+ *
+ * \sa drmCommandNone(), drmCommandRead(), drmCommandWrite(), and
+ * drmCommandReadWrite().
+ */
+#define DRM_COMMAND_BASE                0x40
+#define DRM_COMMAND_END			0xA0
+
+/**
+ * struct drm_event - Header for DRM events
+ * @type: event type.
+ * @length: total number of payload bytes (including header).
+ *
+ * This struct is a header for events written back to user-space on the DRM FD.
+ * A read on the DRM FD will always only return complete events: e.g. if the
+ * read buffer is 100 bytes large and there are two 64 byte events pending,
+ * only one will be returned.
+ *
+ * Event types 0 - 0x7fffffff are generic DRM events, 0x80000000 and
+ * up are chipset specific. Generic DRM events include &DRM_EVENT_VBLANK,
+ * &DRM_EVENT_FLIP_COMPLETE and &DRM_EVENT_CRTC_SEQUENCE.
+ */
+struct drm_event {
+	__u32 type;
+	__u32 length;
+};
+
+/**
+ * DRM_EVENT_VBLANK - vertical blanking event
+ *
+ * This event is sent in response to &DRM_IOCTL_WAIT_VBLANK with the
+ * &_DRM_VBLANK_EVENT flag set.
+ *
+ * The event payload is a struct drm_event_vblank.
+ */
+#define DRM_EVENT_VBLANK 0x01
+/**
+ * DRM_EVENT_FLIP_COMPLETE - page-flip completion event
+ *
+ * This event is sent in response to an atomic commit or legacy page-flip with
+ * the &DRM_MODE_PAGE_FLIP_EVENT flag set.
+ *
+ * The event payload is a struct drm_event_vblank.
+ */
+#define DRM_EVENT_FLIP_COMPLETE 0x02
+/**
+ * DRM_EVENT_CRTC_SEQUENCE - CRTC sequence event
+ *
+ * This event is sent in response to &DRM_IOCTL_CRTC_QUEUE_SEQUENCE.
+ *
+ * The event payload is a struct drm_event_crtc_sequence.
+ */
+#define DRM_EVENT_CRTC_SEQUENCE	0x03
+
+struct drm_event_vblank {
+	struct drm_event base;
+	__u64 user_data;
+	__u32 tv_sec;
+	__u32 tv_usec;
+	__u32 sequence;
+	__u32 crtc_id; /* 0 on older kernels that do not support this */
+};
+
+/* Event delivered at sequence. Time stamp marks when the first pixel
+ * of the refresh cycle leaves the display engine for the display
+ */
+struct drm_event_crtc_sequence {
+	struct drm_event	base;
+	__u64			user_data;
+	__s64			time_ns;
+	__u64			sequence;
+};
+
+/* typedef area */
+typedef struct drm_clip_rect drm_clip_rect_t;
+typedef struct drm_drawable_info drm_drawable_info_t;
+typedef struct drm_tex_region drm_tex_region_t;
+typedef struct drm_hw_lock drm_hw_lock_t;
+typedef struct drm_version drm_version_t;
+typedef struct drm_unique drm_unique_t;
+typedef struct drm_list drm_list_t;
+typedef struct drm_block drm_block_t;
+typedef struct drm_control drm_control_t;
+typedef enum drm_map_type drm_map_type_t;
+typedef enum drm_map_flags drm_map_flags_t;
+typedef struct drm_ctx_priv_map drm_ctx_priv_map_t;
+typedef struct drm_map drm_map_t;
+typedef struct drm_client drm_client_t;
+typedef enum drm_stat_type drm_stat_type_t;
+typedef struct drm_stats drm_stats_t;
+typedef enum drm_lock_flags drm_lock_flags_t;
+typedef struct drm_lock drm_lock_t;
+typedef enum drm_dma_flags drm_dma_flags_t;
+typedef struct drm_buf_desc drm_buf_desc_t;
+typedef struct drm_buf_info drm_buf_info_t;
+typedef struct drm_buf_free drm_buf_free_t;
+typedef struct drm_buf_pub drm_buf_pub_t;
+typedef struct drm_buf_map drm_buf_map_t;
+typedef struct drm_dma drm_dma_t;
+typedef union drm_wait_vblank drm_wait_vblank_t;
+typedef struct drm_agp_mode drm_agp_mode_t;
+typedef enum drm_ctx_flags drm_ctx_flags_t;
+typedef struct drm_ctx drm_ctx_t;
+typedef struct drm_ctx_res drm_ctx_res_t;
+typedef struct drm_draw drm_draw_t;
+typedef struct drm_update_draw drm_update_draw_t;
+typedef struct drm_auth drm_auth_t;
+typedef struct drm_irq_busid drm_irq_busid_t;
+typedef enum drm_vblank_seq_type drm_vblank_seq_type_t;
+
+typedef struct drm_agp_buffer drm_agp_buffer_t;
+typedef struct drm_agp_binding drm_agp_binding_t;
+typedef struct drm_agp_info drm_agp_info_t;
+typedef struct drm_scatter_gather drm_scatter_gather_t;
+typedef struct drm_set_version drm_set_version_t;
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
diff --git a/include/drm/drm_fourcc.h b/include/drm/drm_fourcc.h
new file mode 100644
index 0000000..9b25048
--- /dev/null
+++ b/include/drm/drm_fourcc.h
@@ -0,0 +1,1571 @@
+/*
+ * Copyright 2011 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef DRM_FOURCC_H
+#define DRM_FOURCC_H
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/**
+ * DOC: overview
+ *
+ * In the DRM subsystem, framebuffer pixel formats are described using the
+ * fourcc codes defined in `include/uapi/drm/drm_fourcc.h`. In addition to the
+ * fourcc code, a Format Modifier may optionally be provided, in order to
+ * further describe the buffer's format - for example tiling or compression.
+ *
+ * Format Modifiers
+ * ----------------
+ *
+ * Format modifiers are used in conjunction with a fourcc code, forming a
+ * unique fourcc:modifier pair. This format:modifier pair must fully define the
+ * format and data layout of the buffer, and should be the only way to describe
+ * that particular buffer.
+ *
+ * Having multiple fourcc:modifier pairs which describe the same layout should
+ * be avoided, as such aliases run the risk of different drivers exposing
+ * different names for the same data format, forcing userspace to understand
+ * that they are aliases.
+ *
+ * Format modifiers may change any property of the buffer, including the number
+ * of planes and/or the required allocation size. Format modifiers are
+ * vendor-namespaced, and as such the relationship between a fourcc code and a
+ * modifier is specific to the modifer being used. For example, some modifiers
+ * may preserve meaning - such as number of planes - from the fourcc code,
+ * whereas others may not.
+ *
+ * Modifiers must uniquely encode buffer layout. In other words, a buffer must
+ * match only a single modifier. A modifier must not be a subset of layouts of
+ * another modifier. For instance, it's incorrect to encode pitch alignment in
+ * a modifier: a buffer may match a 64-pixel aligned modifier and a 32-pixel
+ * aligned modifier. That said, modifiers can have implicit minimal
+ * requirements.
+ *
+ * For modifiers where the combination of fourcc code and modifier can alias,
+ * a canonical pair needs to be defined and used by all drivers. Preferred
+ * combinations are also encouraged where all combinations might lead to
+ * confusion and unnecessarily reduced interoperability. An example for the
+ * latter is AFBC, where the ABGR layouts are preferred over ARGB layouts.
+ *
+ * There are two kinds of modifier users:
+ *
+ * - Kernel and user-space drivers: for drivers it's important that modifiers
+ *   don't alias, otherwise two drivers might support the same format but use
+ *   different aliases, preventing them from sharing buffers in an efficient
+ *   format.
+ * - Higher-level programs interfacing with KMS/GBM/EGL/Vulkan/etc: these users
+ *   see modifiers as opaque tokens they can check for equality and intersect.
+ *   These users musn't need to know to reason about the modifier value
+ *   (i.e. they are not expected to extract information out of the modifier).
+ *
+ * Vendors should document their modifier usage in as much detail as
+ * possible, to ensure maximum compatibility across devices, drivers and
+ * applications.
+ *
+ * The authoritative list of format modifier codes is found in
+ * `include/uapi/drm/drm_fourcc.h`
+ *
+ * Open Source User Waiver
+ * -----------------------
+ *
+ * Because this is the authoritative source for pixel formats and modifiers
+ * referenced by GL, Vulkan extensions and other standards and hence used both
+ * by open source and closed source driver stacks, the usual requirement for an
+ * upstream in-kernel or open source userspace user does not apply.
+ *
+ * To ensure, as much as feasible, compatibility across stacks and avoid
+ * confusion with incompatible enumerations stakeholders for all relevant driver
+ * stacks should approve additions.
+ */
+
+#define fourcc_code(a, b, c, d) ((__u32)(a) | ((__u32)(b) << 8) | \
+				 ((__u32)(c) << 16) | ((__u32)(d) << 24))
+
+#define DRM_FORMAT_BIG_ENDIAN (1U<<31) /* format is big endian instead of little endian */
+
+/* Reserve 0 for the invalid format specifier */
+#define DRM_FORMAT_INVALID	0
+
+/* color index */
+#define DRM_FORMAT_C1		fourcc_code('C', '1', ' ', ' ') /* [7:0] C0:C1:C2:C3:C4:C5:C6:C7 1:1:1:1:1:1:1:1 eight pixels/byte */
+#define DRM_FORMAT_C2		fourcc_code('C', '2', ' ', ' ') /* [7:0] C0:C1:C2:C3 2:2:2:2 four pixels/byte */
+#define DRM_FORMAT_C4		fourcc_code('C', '4', ' ', ' ') /* [7:0] C0:C1 4:4 two pixels/byte */
+#define DRM_FORMAT_C8		fourcc_code('C', '8', ' ', ' ') /* [7:0] C */
+
+/* 1 bpp Darkness (inverse relationship between channel value and brightness) */
+#define DRM_FORMAT_D1		fourcc_code('D', '1', ' ', ' ') /* [7:0] D0:D1:D2:D3:D4:D5:D6:D7 1:1:1:1:1:1:1:1 eight pixels/byte */
+
+/* 2 bpp Darkness (inverse relationship between channel value and brightness) */
+#define DRM_FORMAT_D2		fourcc_code('D', '2', ' ', ' ') /* [7:0] D0:D1:D2:D3 2:2:2:2 four pixels/byte */
+
+/* 4 bpp Darkness (inverse relationship between channel value and brightness) */
+#define DRM_FORMAT_D4		fourcc_code('D', '4', ' ', ' ') /* [7:0] D0:D1 4:4 two pixels/byte */
+
+/* 8 bpp Darkness (inverse relationship between channel value and brightness) */
+#define DRM_FORMAT_D8		fourcc_code('D', '8', ' ', ' ') /* [7:0] D */
+
+/* 1 bpp Red (direct relationship between channel value and brightness) */
+#define DRM_FORMAT_R1		fourcc_code('R', '1', ' ', ' ') /* [7:0] R0:R1:R2:R3:R4:R5:R6:R7 1:1:1:1:1:1:1:1 eight pixels/byte */
+
+/* 2 bpp Red (direct relationship between channel value and brightness) */
+#define DRM_FORMAT_R2		fourcc_code('R', '2', ' ', ' ') /* [7:0] R0:R1:R2:R3 2:2:2:2 four pixels/byte */
+
+/* 4 bpp Red (direct relationship between channel value and brightness) */
+#define DRM_FORMAT_R4		fourcc_code('R', '4', ' ', ' ') /* [7:0] R0:R1 4:4 two pixels/byte */
+
+/* 8 bpp Red (direct relationship between channel value and brightness) */
+#define DRM_FORMAT_R8		fourcc_code('R', '8', ' ', ' ') /* [7:0] R */
+
+/* 10 bpp Red (direct relationship between channel value and brightness) */
+#define DRM_FORMAT_R10		fourcc_code('R', '1', '0', ' ') /* [15:0] x:R 6:10 little endian */
+
+/* 12 bpp Red (direct relationship between channel value and brightness) */
+#define DRM_FORMAT_R12		fourcc_code('R', '1', '2', ' ') /* [15:0] x:R 4:12 little endian */
+
+/* 16 bpp Red (direct relationship between channel value and brightness) */
+#define DRM_FORMAT_R16		fourcc_code('R', '1', '6', ' ') /* [15:0] R little endian */
+
+/* 16 bpp RG */
+#define DRM_FORMAT_RG88		fourcc_code('R', 'G', '8', '8') /* [15:0] R:G 8:8 little endian */
+#define DRM_FORMAT_GR88		fourcc_code('G', 'R', '8', '8') /* [15:0] G:R 8:8 little endian */
+
+/* 32 bpp RG */
+#define DRM_FORMAT_RG1616	fourcc_code('R', 'G', '3', '2') /* [31:0] R:G 16:16 little endian */
+#define DRM_FORMAT_GR1616	fourcc_code('G', 'R', '3', '2') /* [31:0] G:R 16:16 little endian */
+
+/* 8 bpp RGB */
+#define DRM_FORMAT_RGB332	fourcc_code('R', 'G', 'B', '8') /* [7:0] R:G:B 3:3:2 */
+#define DRM_FORMAT_BGR233	fourcc_code('B', 'G', 'R', '8') /* [7:0] B:G:R 2:3:3 */
+
+/* 16 bpp RGB */
+#define DRM_FORMAT_XRGB4444	fourcc_code('X', 'R', '1', '2') /* [15:0] x:R:G:B 4:4:4:4 little endian */
+#define DRM_FORMAT_XBGR4444	fourcc_code('X', 'B', '1', '2') /* [15:0] x:B:G:R 4:4:4:4 little endian */
+#define DRM_FORMAT_RGBX4444	fourcc_code('R', 'X', '1', '2') /* [15:0] R:G:B:x 4:4:4:4 little endian */
+#define DRM_FORMAT_BGRX4444	fourcc_code('B', 'X', '1', '2') /* [15:0] B:G:R:x 4:4:4:4 little endian */
+
+#define DRM_FORMAT_ARGB4444	fourcc_code('A', 'R', '1', '2') /* [15:0] A:R:G:B 4:4:4:4 little endian */
+#define DRM_FORMAT_ABGR4444	fourcc_code('A', 'B', '1', '2') /* [15:0] A:B:G:R 4:4:4:4 little endian */
+#define DRM_FORMAT_RGBA4444	fourcc_code('R', 'A', '1', '2') /* [15:0] R:G:B:A 4:4:4:4 little endian */
+#define DRM_FORMAT_BGRA4444	fourcc_code('B', 'A', '1', '2') /* [15:0] B:G:R:A 4:4:4:4 little endian */
+
+#define DRM_FORMAT_XRGB1555	fourcc_code('X', 'R', '1', '5') /* [15:0] x:R:G:B 1:5:5:5 little endian */
+#define DRM_FORMAT_XBGR1555	fourcc_code('X', 'B', '1', '5') /* [15:0] x:B:G:R 1:5:5:5 little endian */
+#define DRM_FORMAT_RGBX5551	fourcc_code('R', 'X', '1', '5') /* [15:0] R:G:B:x 5:5:5:1 little endian */
+#define DRM_FORMAT_BGRX5551	fourcc_code('B', 'X', '1', '5') /* [15:0] B:G:R:x 5:5:5:1 little endian */
+
+#define DRM_FORMAT_ARGB1555	fourcc_code('A', 'R', '1', '5') /* [15:0] A:R:G:B 1:5:5:5 little endian */
+#define DRM_FORMAT_ABGR1555	fourcc_code('A', 'B', '1', '5') /* [15:0] A:B:G:R 1:5:5:5 little endian */
+#define DRM_FORMAT_RGBA5551	fourcc_code('R', 'A', '1', '5') /* [15:0] R:G:B:A 5:5:5:1 little endian */
+#define DRM_FORMAT_BGRA5551	fourcc_code('B', 'A', '1', '5') /* [15:0] B:G:R:A 5:5:5:1 little endian */
+
+#define DRM_FORMAT_RGB565	fourcc_code('R', 'G', '1', '6') /* [15:0] R:G:B 5:6:5 little endian */
+#define DRM_FORMAT_BGR565	fourcc_code('B', 'G', '1', '6') /* [15:0] B:G:R 5:6:5 little endian */
+
+/* 24 bpp RGB */
+#define DRM_FORMAT_RGB888	fourcc_code('R', 'G', '2', '4') /* [23:0] R:G:B little endian */
+#define DRM_FORMAT_BGR888	fourcc_code('B', 'G', '2', '4') /* [23:0] B:G:R little endian */
+
+/* 32 bpp RGB */
+#define DRM_FORMAT_XRGB8888	fourcc_code('X', 'R', '2', '4') /* [31:0] x:R:G:B 8:8:8:8 little endian */
+#define DRM_FORMAT_XBGR8888	fourcc_code('X', 'B', '2', '4') /* [31:0] x:B:G:R 8:8:8:8 little endian */
+#define DRM_FORMAT_RGBX8888	fourcc_code('R', 'X', '2', '4') /* [31:0] R:G:B:x 8:8:8:8 little endian */
+#define DRM_FORMAT_BGRX8888	fourcc_code('B', 'X', '2', '4') /* [31:0] B:G:R:x 8:8:8:8 little endian */
+
+#define DRM_FORMAT_ARGB8888	fourcc_code('A', 'R', '2', '4') /* [31:0] A:R:G:B 8:8:8:8 little endian */
+#define DRM_FORMAT_ABGR8888	fourcc_code('A', 'B', '2', '4') /* [31:0] A:B:G:R 8:8:8:8 little endian */
+#define DRM_FORMAT_RGBA8888	fourcc_code('R', 'A', '2', '4') /* [31:0] R:G:B:A 8:8:8:8 little endian */
+#define DRM_FORMAT_BGRA8888	fourcc_code('B', 'A', '2', '4') /* [31:0] B:G:R:A 8:8:8:8 little endian */
+
+#define DRM_FORMAT_XRGB2101010	fourcc_code('X', 'R', '3', '0') /* [31:0] x:R:G:B 2:10:10:10 little endian */
+#define DRM_FORMAT_XBGR2101010	fourcc_code('X', 'B', '3', '0') /* [31:0] x:B:G:R 2:10:10:10 little endian */
+#define DRM_FORMAT_RGBX1010102	fourcc_code('R', 'X', '3', '0') /* [31:0] R:G:B:x 10:10:10:2 little endian */
+#define DRM_FORMAT_BGRX1010102	fourcc_code('B', 'X', '3', '0') /* [31:0] B:G:R:x 10:10:10:2 little endian */
+
+#define DRM_FORMAT_ARGB2101010	fourcc_code('A', 'R', '3', '0') /* [31:0] A:R:G:B 2:10:10:10 little endian */
+#define DRM_FORMAT_ABGR2101010	fourcc_code('A', 'B', '3', '0') /* [31:0] A:B:G:R 2:10:10:10 little endian */
+#define DRM_FORMAT_RGBA1010102	fourcc_code('R', 'A', '3', '0') /* [31:0] R:G:B:A 10:10:10:2 little endian */
+#define DRM_FORMAT_BGRA1010102	fourcc_code('B', 'A', '3', '0') /* [31:0] B:G:R:A 10:10:10:2 little endian */
+
+/* 64 bpp RGB */
+#define DRM_FORMAT_XRGB16161616	fourcc_code('X', 'R', '4', '8') /* [63:0] x:R:G:B 16:16:16:16 little endian */
+#define DRM_FORMAT_XBGR16161616	fourcc_code('X', 'B', '4', '8') /* [63:0] x:B:G:R 16:16:16:16 little endian */
+
+#define DRM_FORMAT_ARGB16161616	fourcc_code('A', 'R', '4', '8') /* [63:0] A:R:G:B 16:16:16:16 little endian */
+#define DRM_FORMAT_ABGR16161616	fourcc_code('A', 'B', '4', '8') /* [63:0] A:B:G:R 16:16:16:16 little endian */
+
+/*
+ * Floating point 64bpp RGB
+ * IEEE 754-2008 binary16 half-precision float
+ * [15:0] sign:exponent:mantissa 1:5:10
+ */
+#define DRM_FORMAT_XRGB16161616F fourcc_code('X', 'R', '4', 'H') /* [63:0] x:R:G:B 16:16:16:16 little endian */
+#define DRM_FORMAT_XBGR16161616F fourcc_code('X', 'B', '4', 'H') /* [63:0] x:B:G:R 16:16:16:16 little endian */
+
+#define DRM_FORMAT_ARGB16161616F fourcc_code('A', 'R', '4', 'H') /* [63:0] A:R:G:B 16:16:16:16 little endian */
+#define DRM_FORMAT_ABGR16161616F fourcc_code('A', 'B', '4', 'H') /* [63:0] A:B:G:R 16:16:16:16 little endian */
+
+/*
+ * RGBA format with 10-bit components packed in 64-bit per pixel, with 6 bits
+ * of unused padding per component:
+ */
+#define DRM_FORMAT_AXBXGXRX106106106106 fourcc_code('A', 'B', '1', '0') /* [63:0] A:x:B:x:G:x:R:x 10:6:10:6:10:6:10:6 little endian */
+
+/* packed YCbCr */
+#define DRM_FORMAT_YUYV		fourcc_code('Y', 'U', 'Y', 'V') /* [31:0] Cr0:Y1:Cb0:Y0 8:8:8:8 little endian */
+#define DRM_FORMAT_YVYU		fourcc_code('Y', 'V', 'Y', 'U') /* [31:0] Cb0:Y1:Cr0:Y0 8:8:8:8 little endian */
+#define DRM_FORMAT_UYVY		fourcc_code('U', 'Y', 'V', 'Y') /* [31:0] Y1:Cr0:Y0:Cb0 8:8:8:8 little endian */
+#define DRM_FORMAT_VYUY		fourcc_code('V', 'Y', 'U', 'Y') /* [31:0] Y1:Cb0:Y0:Cr0 8:8:8:8 little endian */
+
+#define DRM_FORMAT_AYUV		fourcc_code('A', 'Y', 'U', 'V') /* [31:0] A:Y:Cb:Cr 8:8:8:8 little endian */
+#define DRM_FORMAT_AVUY8888	fourcc_code('A', 'V', 'U', 'Y') /* [31:0] A:Cr:Cb:Y 8:8:8:8 little endian */
+#define DRM_FORMAT_XYUV8888	fourcc_code('X', 'Y', 'U', 'V') /* [31:0] X:Y:Cb:Cr 8:8:8:8 little endian */
+#define DRM_FORMAT_XVUY8888	fourcc_code('X', 'V', 'U', 'Y') /* [31:0] X:Cr:Cb:Y 8:8:8:8 little endian */
+#define DRM_FORMAT_VUY888	fourcc_code('V', 'U', '2', '4') /* [23:0] Cr:Cb:Y 8:8:8 little endian */
+#define DRM_FORMAT_VUY101010	fourcc_code('V', 'U', '3', '0') /* Y followed by U then V, 10:10:10. Non-linear modifier only */
+
+/*
+ * packed Y2xx indicate for each component, xx valid data occupy msb
+ * 16-xx padding occupy lsb
+ */
+#define DRM_FORMAT_Y210         fourcc_code('Y', '2', '1', '0') /* [63:0] Cr0:0:Y1:0:Cb0:0:Y0:0 10:6:10:6:10:6:10:6 little endian per 2 Y pixels */
+#define DRM_FORMAT_Y212         fourcc_code('Y', '2', '1', '2') /* [63:0] Cr0:0:Y1:0:Cb0:0:Y0:0 12:4:12:4:12:4:12:4 little endian per 2 Y pixels */
+#define DRM_FORMAT_Y216         fourcc_code('Y', '2', '1', '6') /* [63:0] Cr0:Y1:Cb0:Y0 16:16:16:16 little endian per 2 Y pixels */
+
+/*
+ * packed Y4xx indicate for each component, xx valid data occupy msb
+ * 16-xx padding occupy lsb except Y410
+ */
+#define DRM_FORMAT_Y410         fourcc_code('Y', '4', '1', '0') /* [31:0] A:Cr:Y:Cb 2:10:10:10 little endian */
+#define DRM_FORMAT_Y412         fourcc_code('Y', '4', '1', '2') /* [63:0] A:0:Cr:0:Y:0:Cb:0 12:4:12:4:12:4:12:4 little endian */
+#define DRM_FORMAT_Y416         fourcc_code('Y', '4', '1', '6') /* [63:0] A:Cr:Y:Cb 16:16:16:16 little endian */
+
+#define DRM_FORMAT_XVYU2101010	fourcc_code('X', 'V', '3', '0') /* [31:0] X:Cr:Y:Cb 2:10:10:10 little endian */
+#define DRM_FORMAT_XVYU12_16161616	fourcc_code('X', 'V', '3', '6') /* [63:0] X:0:Cr:0:Y:0:Cb:0 12:4:12:4:12:4:12:4 little endian */
+#define DRM_FORMAT_XVYU16161616	fourcc_code('X', 'V', '4', '8') /* [63:0] X:Cr:Y:Cb 16:16:16:16 little endian */
+
+/*
+ * packed YCbCr420 2x2 tiled formats
+ * first 64 bits will contain Y,Cb,Cr components for a 2x2 tile
+ */
+/* [63:0]   A3:A2:Y3:0:Cr0:0:Y2:0:A1:A0:Y1:0:Cb0:0:Y0:0  1:1:8:2:8:2:8:2:1:1:8:2:8:2:8:2 little endian */
+#define DRM_FORMAT_Y0L0		fourcc_code('Y', '0', 'L', '0')
+/* [63:0]   X3:X2:Y3:0:Cr0:0:Y2:0:X1:X0:Y1:0:Cb0:0:Y0:0  1:1:8:2:8:2:8:2:1:1:8:2:8:2:8:2 little endian */
+#define DRM_FORMAT_X0L0		fourcc_code('X', '0', 'L', '0')
+
+/* [63:0]   A3:A2:Y3:Cr0:Y2:A1:A0:Y1:Cb0:Y0  1:1:10:10:10:1:1:10:10:10 little endian */
+#define DRM_FORMAT_Y0L2		fourcc_code('Y', '0', 'L', '2')
+/* [63:0]   X3:X2:Y3:Cr0:Y2:X1:X0:Y1:Cb0:Y0  1:1:10:10:10:1:1:10:10:10 little endian */
+#define DRM_FORMAT_X0L2		fourcc_code('X', '0', 'L', '2')
+
+/*
+ * 1-plane YUV 4:2:0
+ * In these formats, the component ordering is specified (Y, followed by U
+ * then V), but the exact Linear layout is undefined.
+ * These formats can only be used with a non-Linear modifier.
+ */
+#define DRM_FORMAT_YUV420_8BIT	fourcc_code('Y', 'U', '0', '8')
+#define DRM_FORMAT_YUV420_10BIT	fourcc_code('Y', 'U', '1', '0')
+
+/*
+ * 2 plane RGB + A
+ * index 0 = RGB plane, same format as the corresponding non _A8 format has
+ * index 1 = A plane, [7:0] A
+ */
+#define DRM_FORMAT_XRGB8888_A8	fourcc_code('X', 'R', 'A', '8')
+#define DRM_FORMAT_XBGR8888_A8	fourcc_code('X', 'B', 'A', '8')
+#define DRM_FORMAT_RGBX8888_A8	fourcc_code('R', 'X', 'A', '8')
+#define DRM_FORMAT_BGRX8888_A8	fourcc_code('B', 'X', 'A', '8')
+#define DRM_FORMAT_RGB888_A8	fourcc_code('R', '8', 'A', '8')
+#define DRM_FORMAT_BGR888_A8	fourcc_code('B', '8', 'A', '8')
+#define DRM_FORMAT_RGB565_A8	fourcc_code('R', '5', 'A', '8')
+#define DRM_FORMAT_BGR565_A8	fourcc_code('B', '5', 'A', '8')
+
+/*
+ * 2 plane YCbCr
+ * index 0 = Y plane, [7:0] Y
+ * index 1 = Cr:Cb plane, [15:0] Cr:Cb little endian
+ * or
+ * index 1 = Cb:Cr plane, [15:0] Cb:Cr little endian
+ */
+#define DRM_FORMAT_NV12		fourcc_code('N', 'V', '1', '2') /* 2x2 subsampled Cr:Cb plane */
+#define DRM_FORMAT_NV21		fourcc_code('N', 'V', '2', '1') /* 2x2 subsampled Cb:Cr plane */
+#define DRM_FORMAT_NV16		fourcc_code('N', 'V', '1', '6') /* 2x1 subsampled Cr:Cb plane */
+#define DRM_FORMAT_NV61		fourcc_code('N', 'V', '6', '1') /* 2x1 subsampled Cb:Cr plane */
+#define DRM_FORMAT_NV24		fourcc_code('N', 'V', '2', '4') /* non-subsampled Cr:Cb plane */
+#define DRM_FORMAT_NV42		fourcc_code('N', 'V', '4', '2') /* non-subsampled Cb:Cr plane */
+/*
+ * 2 plane YCbCr
+ * index 0 = Y plane, [39:0] Y3:Y2:Y1:Y0 little endian
+ * index 1 = Cr:Cb plane, [39:0] Cr1:Cb1:Cr0:Cb0 little endian
+ */
+#define DRM_FORMAT_NV15		fourcc_code('N', 'V', '1', '5') /* 2x2 subsampled Cr:Cb plane */
+#define DRM_FORMAT_NV20		fourcc_code('N', 'V', '2', '0') /* 2x1 subsampled Cr:Cb plane */
+#define DRM_FORMAT_NV30		fourcc_code('N', 'V', '3', '0') /* non-subsampled Cr:Cb plane */
+
+/*
+ * 2 plane YCbCr MSB aligned
+ * index 0 = Y plane, [15:0] Y:x [10:6] little endian
+ * index 1 = Cr:Cb plane, [31:0] Cr:x:Cb:x [10:6:10:6] little endian
+ */
+#define DRM_FORMAT_P210		fourcc_code('P', '2', '1', '0') /* 2x1 subsampled Cr:Cb plane, 10 bit per channel */
+
+/*
+ * 2 plane YCbCr MSB aligned
+ * index 0 = Y plane, [15:0] Y:x [10:6] little endian
+ * index 1 = Cr:Cb plane, [31:0] Cr:x:Cb:x [10:6:10:6] little endian
+ */
+#define DRM_FORMAT_P010		fourcc_code('P', '0', '1', '0') /* 2x2 subsampled Cr:Cb plane 10 bits per channel */
+
+/*
+ * 2 plane YCbCr MSB aligned
+ * index 0 = Y plane, [15:0] Y:x [12:4] little endian
+ * index 1 = Cr:Cb plane, [31:0] Cr:x:Cb:x [12:4:12:4] little endian
+ */
+#define DRM_FORMAT_P012		fourcc_code('P', '0', '1', '2') /* 2x2 subsampled Cr:Cb plane 12 bits per channel */
+
+/*
+ * 2 plane YCbCr MSB aligned
+ * index 0 = Y plane, [15:0] Y little endian
+ * index 1 = Cr:Cb plane, [31:0] Cr:Cb [16:16] little endian
+ */
+#define DRM_FORMAT_P016		fourcc_code('P', '0', '1', '6') /* 2x2 subsampled Cr:Cb plane 16 bits per channel */
+
+/* 2 plane YCbCr420.
+ * 3 10 bit components and 2 padding bits packed into 4 bytes.
+ * index 0 = Y plane, [31:0] x:Y2:Y1:Y0 2:10:10:10 little endian
+ * index 1 = Cr:Cb plane, [63:0] x:Cr2:Cb2:Cr1:x:Cb1:Cr0:Cb0 [2:10:10:10:2:10:10:10] little endian
+ */
+#define DRM_FORMAT_P030		fourcc_code('P', '0', '3', '0') /* 2x2 subsampled Cr:Cb plane 10 bits per channel packed */
+
+/* 3 plane non-subsampled (444) YCbCr
+ * 16 bits per component, but only 10 bits are used and 6 bits are padded
+ * index 0: Y plane, [15:0] Y:x [10:6] little endian
+ * index 1: Cb plane, [15:0] Cb:x [10:6] little endian
+ * index 2: Cr plane, [15:0] Cr:x [10:6] little endian
+ */
+#define DRM_FORMAT_Q410		fourcc_code('Q', '4', '1', '0')
+
+/* 3 plane non-subsampled (444) YCrCb
+ * 16 bits per component, but only 10 bits are used and 6 bits are padded
+ * index 0: Y plane, [15:0] Y:x [10:6] little endian
+ * index 1: Cr plane, [15:0] Cr:x [10:6] little endian
+ * index 2: Cb plane, [15:0] Cb:x [10:6] little endian
+ */
+#define DRM_FORMAT_Q401		fourcc_code('Q', '4', '0', '1')
+
+/*
+ * 3 plane YCbCr
+ * index 0: Y plane, [7:0] Y
+ * index 1: Cb plane, [7:0] Cb
+ * index 2: Cr plane, [7:0] Cr
+ * or
+ * index 1: Cr plane, [7:0] Cr
+ * index 2: Cb plane, [7:0] Cb
+ */
+#define DRM_FORMAT_YUV410	fourcc_code('Y', 'U', 'V', '9') /* 4x4 subsampled Cb (1) and Cr (2) planes */
+#define DRM_FORMAT_YVU410	fourcc_code('Y', 'V', 'U', '9') /* 4x4 subsampled Cr (1) and Cb (2) planes */
+#define DRM_FORMAT_YUV411	fourcc_code('Y', 'U', '1', '1') /* 4x1 subsampled Cb (1) and Cr (2) planes */
+#define DRM_FORMAT_YVU411	fourcc_code('Y', 'V', '1', '1') /* 4x1 subsampled Cr (1) and Cb (2) planes */
+#define DRM_FORMAT_YUV420	fourcc_code('Y', 'U', '1', '2') /* 2x2 subsampled Cb (1) and Cr (2) planes */
+#define DRM_FORMAT_YVU420	fourcc_code('Y', 'V', '1', '2') /* 2x2 subsampled Cr (1) and Cb (2) planes */
+#define DRM_FORMAT_YUV422	fourcc_code('Y', 'U', '1', '6') /* 2x1 subsampled Cb (1) and Cr (2) planes */
+#define DRM_FORMAT_YVU422	fourcc_code('Y', 'V', '1', '6') /* 2x1 subsampled Cr (1) and Cb (2) planes */
+#define DRM_FORMAT_YUV444	fourcc_code('Y', 'U', '2', '4') /* non-subsampled Cb (1) and Cr (2) planes */
+#define DRM_FORMAT_YVU444	fourcc_code('Y', 'V', '2', '4') /* non-subsampled Cr (1) and Cb (2) planes */
+
+
+/*
+ * Format Modifiers:
+ *
+ * Format modifiers describe, typically, a re-ordering or modification
+ * of the data in a plane of an FB.  This can be used to express tiled/
+ * swizzled formats, or compression, or a combination of the two.
+ *
+ * The upper 8 bits of the format modifier are a vendor-id as assigned
+ * below.  The lower 56 bits are assigned as vendor sees fit.
+ */
+
+/* Vendor Ids: */
+#define DRM_FORMAT_MOD_VENDOR_NONE    0
+#define DRM_FORMAT_MOD_VENDOR_INTEL   0x01
+#define DRM_FORMAT_MOD_VENDOR_AMD     0x02
+#define DRM_FORMAT_MOD_VENDOR_NVIDIA  0x03
+#define DRM_FORMAT_MOD_VENDOR_SAMSUNG 0x04
+#define DRM_FORMAT_MOD_VENDOR_QCOM    0x05
+#define DRM_FORMAT_MOD_VENDOR_VIVANTE 0x06
+#define DRM_FORMAT_MOD_VENDOR_BROADCOM 0x07
+#define DRM_FORMAT_MOD_VENDOR_ARM     0x08
+#define DRM_FORMAT_MOD_VENDOR_ALLWINNER 0x09
+#define DRM_FORMAT_MOD_VENDOR_AMLOGIC 0x0a
+
+/* add more to the end as needed */
+
+#define DRM_FORMAT_RESERVED	      ((1ULL << 56) - 1)
+
+#define fourcc_mod_get_vendor(modifier) \
+	(((modifier) >> 56) & 0xff)
+
+#define fourcc_mod_is_vendor(modifier, vendor) \
+	(fourcc_mod_get_vendor(modifier) == DRM_FORMAT_MOD_VENDOR_## vendor)
+
+#define fourcc_mod_code(vendor, val) \
+	((((__u64)DRM_FORMAT_MOD_VENDOR_## vendor) << 56) | ((val) & 0x00ffffffffffffffULL))
+
+/*
+ * Format Modifier tokens:
+ *
+ * When adding a new token please document the layout with a code comment,
+ * similar to the fourcc codes above. drm_fourcc.h is considered the
+ * authoritative source for all of these.
+ *
+ * Generic modifier names:
+ *
+ * DRM_FORMAT_MOD_GENERIC_* definitions are used to provide vendor-neutral names
+ * for layouts which are common across multiple vendors. To preserve
+ * compatibility, in cases where a vendor-specific definition already exists and
+ * a generic name for it is desired, the common name is a purely symbolic alias
+ * and must use the same numerical value as the original definition.
+ *
+ * Note that generic names should only be used for modifiers which describe
+ * generic layouts (such as pixel re-ordering), which may have
+ * independently-developed support across multiple vendors.
+ *
+ * In future cases where a generic layout is identified before merging with a
+ * vendor-specific modifier, a new 'GENERIC' vendor or modifier using vendor
+ * 'NONE' could be considered. This should only be for obvious, exceptional
+ * cases to avoid polluting the 'GENERIC' namespace with modifiers which only
+ * apply to a single vendor.
+ *
+ * Generic names should not be used for cases where multiple hardware vendors
+ * have implementations of the same standardised compression scheme (such as
+ * AFBC). In those cases, all implementations should use the same format
+ * modifier(s), reflecting the vendor of the standard.
+ */
+
+#define DRM_FORMAT_MOD_GENERIC_16_16_TILE DRM_FORMAT_MOD_SAMSUNG_16_16_TILE
+
+/*
+ * Invalid Modifier
+ *
+ * This modifier can be used as a sentinel to terminate the format modifiers
+ * list, or to initialize a variable with an invalid modifier. It might also be
+ * used to report an error back to userspace for certain APIs.
+ */
+#define DRM_FORMAT_MOD_INVALID	fourcc_mod_code(NONE, DRM_FORMAT_RESERVED)
+
+/*
+ * Linear Layout
+ *
+ * Just plain linear layout. Note that this is different from no specifying any
+ * modifier (e.g. not setting DRM_MODE_FB_MODIFIERS in the DRM_ADDFB2 ioctl),
+ * which tells the driver to also take driver-internal information into account
+ * and so might actually result in a tiled framebuffer.
+ */
+#define DRM_FORMAT_MOD_LINEAR	fourcc_mod_code(NONE, 0)
+
+/*
+ * Deprecated: use DRM_FORMAT_MOD_LINEAR instead
+ *
+ * The "none" format modifier doesn't actually mean that the modifier is
+ * implicit, instead it means that the layout is linear. Whether modifiers are
+ * used is out-of-band information carried in an API-specific way (e.g. in a
+ * flag for drm_mode_fb_cmd2).
+ */
+#define DRM_FORMAT_MOD_NONE	0
+
+/* Intel framebuffer modifiers */
+
+/*
+ * Intel X-tiling layout
+ *
+ * This is a tiled layout using 4Kb tiles (except on gen2 where the tiles 2Kb)
+ * in row-major layout. Within the tile bytes are laid out row-major, with
+ * a platform-dependent stride. On top of that the memory can apply
+ * platform-depending swizzling of some higher address bits into bit6.
+ *
+ * Note that this layout is only accurate on intel gen 8+ or valleyview chipsets.
+ * On earlier platforms the is highly platforms specific and not useful for
+ * cross-driver sharing. It exists since on a given platform it does uniquely
+ * identify the layout in a simple way for i915-specific userspace, which
+ * facilitated conversion of userspace to modifiers. Additionally the exact
+ * format on some really old platforms is not known.
+ */
+#define I915_FORMAT_MOD_X_TILED	fourcc_mod_code(INTEL, 1)
+
+/*
+ * Intel Y-tiling layout
+ *
+ * This is a tiled layout using 4Kb tiles (except on gen2 where the tiles 2Kb)
+ * in row-major layout. Within the tile bytes are laid out in OWORD (16 bytes)
+ * chunks column-major, with a platform-dependent height. On top of that the
+ * memory can apply platform-depending swizzling of some higher address bits
+ * into bit6.
+ *
+ * Note that this layout is only accurate on intel gen 8+ or valleyview chipsets.
+ * On earlier platforms the is highly platforms specific and not useful for
+ * cross-driver sharing. It exists since on a given platform it does uniquely
+ * identify the layout in a simple way for i915-specific userspace, which
+ * facilitated conversion of userspace to modifiers. Additionally the exact
+ * format on some really old platforms is not known.
+ */
+#define I915_FORMAT_MOD_Y_TILED	fourcc_mod_code(INTEL, 2)
+
+/*
+ * Intel Yf-tiling layout
+ *
+ * This is a tiled layout using 4Kb tiles in row-major layout.
+ * Within the tile pixels are laid out in 16 256 byte units / sub-tiles which
+ * are arranged in four groups (two wide, two high) with column-major layout.
+ * Each group therefore consits out of four 256 byte units, which are also laid
+ * out as 2x2 column-major.
+ * 256 byte units are made out of four 64 byte blocks of pixels, producing
+ * either a square block or a 2:1 unit.
+ * 64 byte blocks of pixels contain four pixel rows of 16 bytes, where the width
+ * in pixel depends on the pixel depth.
+ */
+#define I915_FORMAT_MOD_Yf_TILED fourcc_mod_code(INTEL, 3)
+
+/*
+ * Intel color control surface (CCS) for render compression
+ *
+ * The framebuffer format must be one of the 8:8:8:8 RGB formats.
+ * The main surface will be plane index 0 and must be Y/Yf-tiled,
+ * the CCS will be plane index 1.
+ *
+ * Each CCS tile matches a 1024x512 pixel area of the main surface.
+ * To match certain aspects of the 3D hardware the CCS is
+ * considered to be made up of normal 128Bx32 Y tiles, Thus
+ * the CCS pitch must be specified in multiples of 128 bytes.
+ *
+ * In reality the CCS tile appears to be a 64Bx64 Y tile, composed
+ * of QWORD (8 bytes) chunks instead of OWORD (16 bytes) chunks.
+ * But that fact is not relevant unless the memory is accessed
+ * directly.
+ */
+#define I915_FORMAT_MOD_Y_TILED_CCS	fourcc_mod_code(INTEL, 4)
+#define I915_FORMAT_MOD_Yf_TILED_CCS	fourcc_mod_code(INTEL, 5)
+
+/*
+ * Intel color control surfaces (CCS) for Gen-12 render compression.
+ *
+ * The main surface is Y-tiled and at plane index 0, the CCS is linear and
+ * at index 1. A 64B CCS cache line corresponds to an area of 4x1 tiles in
+ * main surface. In other words, 4 bits in CCS map to a main surface cache
+ * line pair. The main surface pitch is required to be a multiple of four
+ * Y-tile widths.
+ */
+#define I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS fourcc_mod_code(INTEL, 6)
+
+/*
+ * Intel color control surfaces (CCS) for Gen-12 media compression
+ *
+ * The main surface is Y-tiled and at plane index 0, the CCS is linear and
+ * at index 1. A 64B CCS cache line corresponds to an area of 4x1 tiles in
+ * main surface. In other words, 4 bits in CCS map to a main surface cache
+ * line pair. The main surface pitch is required to be a multiple of four
+ * Y-tile widths. For semi-planar formats like NV12, CCS planes follow the
+ * Y and UV planes i.e., planes 0 and 1 are used for Y and UV surfaces,
+ * planes 2 and 3 for the respective CCS.
+ */
+#define I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS fourcc_mod_code(INTEL, 7)
+
+/*
+ * Intel Color Control Surface with Clear Color (CCS) for Gen-12 render
+ * compression.
+ *
+ * The main surface is Y-tiled and is at plane index 0 whereas CCS is linear
+ * and at index 1. The clear color is stored at index 2, and the pitch should
+ * be 64 bytes aligned. The clear color structure is 256 bits. The first 128 bits
+ * represents Raw Clear Color Red, Green, Blue and Alpha color each represented
+ * by 32 bits. The raw clear color is consumed by the 3d engine and generates
+ * the converted clear color of size 64 bits. The first 32 bits store the Lower
+ * Converted Clear Color value and the next 32 bits store the Higher Converted
+ * Clear Color value when applicable. The Converted Clear Color values are
+ * consumed by the DE. The last 64 bits are used to store Color Discard Enable
+ * and Depth Clear Value Valid which are ignored by the DE. A CCS cache line
+ * corresponds to an area of 4x1 tiles in the main surface. The main surface
+ * pitch is required to be a multiple of 4 tile widths.
+ */
+#define I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC fourcc_mod_code(INTEL, 8)
+
+/*
+ * Intel Tile 4 layout
+ *
+ * This is a tiled layout using 4KB tiles in a row-major layout. It has the same
+ * shape as Tile Y at two granularities: 4KB (128B x 32) and 64B (16B x 4). It
+ * only differs from Tile Y at the 256B granularity in between. At this
+ * granularity, Tile Y has a shape of 16B x 32 rows, but this tiling has a shape
+ * of 64B x 8 rows.
+ */
+#define I915_FORMAT_MOD_4_TILED         fourcc_mod_code(INTEL, 9)
+
+/*
+ * Intel color control surfaces (CCS) for DG2 render compression.
+ *
+ * The main surface is Tile 4 and at plane index 0. The CCS data is stored
+ * outside of the GEM object in a reserved memory area dedicated for the
+ * storage of the CCS data for all RC/RC_CC/MC compressible GEM objects. The
+ * main surface pitch is required to be a multiple of four Tile 4 widths.
+ */
+#define I915_FORMAT_MOD_4_TILED_DG2_RC_CCS fourcc_mod_code(INTEL, 10)
+
+/*
+ * Intel color control surfaces (CCS) for DG2 media compression.
+ *
+ * The main surface is Tile 4 and at plane index 0. For semi-planar formats
+ * like NV12, the Y and UV planes are Tile 4 and are located at plane indices
+ * 0 and 1, respectively. The CCS for all planes are stored outside of the
+ * GEM object in a reserved memory area dedicated for the storage of the
+ * CCS data for all RC/RC_CC/MC compressible GEM objects. The main surface
+ * pitch is required to be a multiple of four Tile 4 widths.
+ */
+#define I915_FORMAT_MOD_4_TILED_DG2_MC_CCS fourcc_mod_code(INTEL, 11)
+
+/*
+ * Intel Color Control Surface with Clear Color (CCS) for DG2 render compression.
+ *
+ * The main surface is Tile 4 and at plane index 0. The CCS data is stored
+ * outside of the GEM object in a reserved memory area dedicated for the
+ * storage of the CCS data for all RC/RC_CC/MC compressible GEM objects. The
+ * main surface pitch is required to be a multiple of four Tile 4 widths. The
+ * clear color is stored at plane index 1 and the pitch should be 64 bytes
+ * aligned. The format of the 256 bits of clear color data matches the one used
+ * for the I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC modifier, see its description
+ * for details.
+ */
+#define I915_FORMAT_MOD_4_TILED_DG2_RC_CCS_CC fourcc_mod_code(INTEL, 12)
+
+/*
+ * Intel Color Control Surfaces (CCS) for display ver. 14 render compression.
+ *
+ * The main surface is tile4 and at plane index 0, the CCS is linear and
+ * at index 1. A 64B CCS cache line corresponds to an area of 4x1 tiles in
+ * main surface. In other words, 4 bits in CCS map to a main surface cache
+ * line pair. The main surface pitch is required to be a multiple of four
+ * tile4 widths.
+ */
+#define I915_FORMAT_MOD_4_TILED_MTL_RC_CCS fourcc_mod_code(INTEL, 13)
+
+/*
+ * Intel Color Control Surfaces (CCS) for display ver. 14 media compression
+ *
+ * The main surface is tile4 and at plane index 0, the CCS is linear and
+ * at index 1. A 64B CCS cache line corresponds to an area of 4x1 tiles in
+ * main surface. In other words, 4 bits in CCS map to a main surface cache
+ * line pair. The main surface pitch is required to be a multiple of four
+ * tile4 widths. For semi-planar formats like NV12, CCS planes follow the
+ * Y and UV planes i.e., planes 0 and 1 are used for Y and UV surfaces,
+ * planes 2 and 3 for the respective CCS.
+ */
+#define I915_FORMAT_MOD_4_TILED_MTL_MC_CCS fourcc_mod_code(INTEL, 14)
+
+/*
+ * Intel Color Control Surface with Clear Color (CCS) for display ver. 14 render
+ * compression.
+ *
+ * The main surface is tile4 and is at plane index 0 whereas CCS is linear
+ * and at index 1. The clear color is stored at index 2, and the pitch should
+ * be ignored. The clear color structure is 256 bits. The first 128 bits
+ * represents Raw Clear Color Red, Green, Blue and Alpha color each represented
+ * by 32 bits. The raw clear color is consumed by the 3d engine and generates
+ * the converted clear color of size 64 bits. The first 32 bits store the Lower
+ * Converted Clear Color value and the next 32 bits store the Higher Converted
+ * Clear Color value when applicable. The Converted Clear Color values are
+ * consumed by the DE. The last 64 bits are used to store Color Discard Enable
+ * and Depth Clear Value Valid which are ignored by the DE. A CCS cache line
+ * corresponds to an area of 4x1 tiles in the main surface. The main surface
+ * pitch is required to be a multiple of 4 tile widths.
+ */
+#define I915_FORMAT_MOD_4_TILED_MTL_RC_CCS_CC fourcc_mod_code(INTEL, 15)
+
+/*
+ * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks
+ *
+ * Macroblocks are laid in a Z-shape, and each pixel data is following the
+ * standard NV12 style.
+ * As for NV12, an image is the result of two frame buffers: one for Y,
+ * one for the interleaved Cb/Cr components (1/2 the height of the Y buffer).
+ * Alignment requirements are (for each buffer):
+ * - multiple of 128 pixels for the width
+ * - multiple of  32 pixels for the height
+ *
+ * For more information: see https://linuxtv.org/downloads/v4l-dvb-apis/re32.html
+ */
+#define DRM_FORMAT_MOD_SAMSUNG_64_32_TILE	fourcc_mod_code(SAMSUNG, 1)
+
+/*
+ * Tiled, 16 (pixels) x 16 (lines) - sized macroblocks
+ *
+ * This is a simple tiled layout using tiles of 16x16 pixels in a row-major
+ * layout. For YCbCr formats Cb/Cr components are taken in such a way that
+ * they correspond to their 16x16 luma block.
+ */
+#define DRM_FORMAT_MOD_SAMSUNG_16_16_TILE	fourcc_mod_code(SAMSUNG, 2)
+
+/*
+ * Qualcomm Compressed Format
+ *
+ * Refers to a compressed variant of the base format that is compressed.
+ * Implementation may be platform and base-format specific.
+ *
+ * Each macrotile consists of m x n (mostly 4 x 4) tiles.
+ * Pixel data pitch/stride is aligned with macrotile width.
+ * Pixel data height is aligned with macrotile height.
+ * Entire pixel data buffer is aligned with 4k(bytes).
+ */
+#define DRM_FORMAT_MOD_QCOM_COMPRESSED	fourcc_mod_code(QCOM, 1)
+
+/*
+ * Qualcomm Tiled Format
+ *
+ * Similar to DRM_FORMAT_MOD_QCOM_COMPRESSED but not compressed.
+ * Implementation may be platform and base-format specific.
+ *
+ * Each macrotile consists of m x n (mostly 4 x 4) tiles.
+ * Pixel data pitch/stride is aligned with macrotile width.
+ * Pixel data height is aligned with macrotile height.
+ * Entire pixel data buffer is aligned with 4k(bytes).
+ */
+#define DRM_FORMAT_MOD_QCOM_TILED3	fourcc_mod_code(QCOM, 3)
+
+/*
+ * Qualcomm Alternate Tiled Format
+ *
+ * Alternate tiled format typically only used within GMEM.
+ * Implementation may be platform and base-format specific.
+ */
+#define DRM_FORMAT_MOD_QCOM_TILED2	fourcc_mod_code(QCOM, 2)
+
+
+/* Vivante framebuffer modifiers */
+
+/*
+ * Vivante 4x4 tiling layout
+ *
+ * This is a simple tiled layout using tiles of 4x4 pixels in a row-major
+ * layout.
+ */
+#define DRM_FORMAT_MOD_VIVANTE_TILED		fourcc_mod_code(VIVANTE, 1)
+
+/*
+ * Vivante 64x64 super-tiling layout
+ *
+ * This is a tiled layout using 64x64 pixel super-tiles, where each super-tile
+ * contains 8x4 groups of 2x4 tiles of 4x4 pixels (like above) each, all in row-
+ * major layout.
+ *
+ * For more information: see
+ * https://github.com/etnaviv/etna_viv/blob/master/doc/hardware.md#texture-tiling
+ */
+#define DRM_FORMAT_MOD_VIVANTE_SUPER_TILED	fourcc_mod_code(VIVANTE, 2)
+
+/*
+ * Vivante 4x4 tiling layout for dual-pipe
+ *
+ * Same as the 4x4 tiling layout, except every second 4x4 pixel tile starts at a
+ * different base address. Offsets from the base addresses are therefore halved
+ * compared to the non-split tiled layout.
+ */
+#define DRM_FORMAT_MOD_VIVANTE_SPLIT_TILED	fourcc_mod_code(VIVANTE, 3)
+
+/*
+ * Vivante 64x64 super-tiling layout for dual-pipe
+ *
+ * Same as the 64x64 super-tiling layout, except every second 4x4 pixel tile
+ * starts at a different base address. Offsets from the base addresses are
+ * therefore halved compared to the non-split super-tiled layout.
+ */
+#define DRM_FORMAT_MOD_VIVANTE_SPLIT_SUPER_TILED fourcc_mod_code(VIVANTE, 4)
+
+/*
+ * Vivante TS (tile-status) buffer modifiers. They can be combined with all of
+ * the color buffer tiling modifiers defined above. When TS is present it's a
+ * separate buffer containing the clear/compression status of each tile. The
+ * modifiers are defined as VIVANTE_MOD_TS_c_s, where c is the color buffer
+ * tile size in bytes covered by one entry in the status buffer and s is the
+ * number of status bits per entry.
+ * We reserve the top 8 bits of the Vivante modifier space for tile status
+ * clear/compression modifiers, as future cores might add some more TS layout
+ * variations.
+ */
+#define VIVANTE_MOD_TS_64_4               (1ULL << 48)
+#define VIVANTE_MOD_TS_64_2               (2ULL << 48)
+#define VIVANTE_MOD_TS_128_4              (3ULL << 48)
+#define VIVANTE_MOD_TS_256_4              (4ULL << 48)
+#define VIVANTE_MOD_TS_MASK               (0xfULL << 48)
+
+/*
+ * Vivante compression modifiers. Those depend on a TS modifier being present
+ * as the TS bits get reinterpreted as compression tags instead of simple
+ * clear markers when compression is enabled.
+ */
+#define VIVANTE_MOD_COMP_DEC400           (1ULL << 52)
+#define VIVANTE_MOD_COMP_MASK             (0xfULL << 52)
+
+/* Masking out the extension bits will yield the base modifier. */
+#define VIVANTE_MOD_EXT_MASK              (VIVANTE_MOD_TS_MASK | \
+                                           VIVANTE_MOD_COMP_MASK)
+
+/* NVIDIA frame buffer modifiers */
+
+/*
+ * Tegra Tiled Layout, used by Tegra 2, 3 and 4.
+ *
+ * Pixels are arranged in simple tiles of 16 x 16 bytes.
+ */
+#define DRM_FORMAT_MOD_NVIDIA_TEGRA_TILED fourcc_mod_code(NVIDIA, 1)
+
+/*
+ * Generalized Block Linear layout, used by desktop GPUs starting with NV50/G80,
+ * and Tegra GPUs starting with Tegra K1.
+ *
+ * Pixels are arranged in Groups of Bytes (GOBs).  GOB size and layout varies
+ * based on the architecture generation.  GOBs themselves are then arranged in
+ * 3D blocks, with the block dimensions (in terms of GOBs) always being a power
+ * of two, and hence expressible as their log2 equivalent (E.g., "2" represents
+ * a block depth or height of "4").
+ *
+ * Chapter 20 "Pixel Memory Formats" of the Tegra X1 TRM describes this format
+ * in full detail.
+ *
+ *       Macro
+ * Bits  Param Description
+ * ----  ----- -----------------------------------------------------------------
+ *
+ *  3:0  h     log2(height) of each block, in GOBs.  Placed here for
+ *             compatibility with the existing
+ *             DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK()-based modifiers.
+ *
+ *  4:4  -     Must be 1, to indicate block-linear layout.  Necessary for
+ *             compatibility with the existing
+ *             DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK()-based modifiers.
+ *
+ *  8:5  -     Reserved (To support 3D-surfaces with variable log2(depth) block
+ *             size).  Must be zero.
+ *
+ *             Note there is no log2(width) parameter.  Some portions of the
+ *             hardware support a block width of two gobs, but it is impractical
+ *             to use due to lack of support elsewhere, and has no known
+ *             benefits.
+ *
+ * 11:9  -     Reserved (To support 2D-array textures with variable array stride
+ *             in blocks, specified via log2(tile width in blocks)).  Must be
+ *             zero.
+ *
+ * 19:12 k     Page Kind.  This value directly maps to a field in the page
+ *             tables of all GPUs >= NV50.  It affects the exact layout of bits
+ *             in memory and can be derived from the tuple
+ *
+ *               (format, GPU model, compression type, samples per pixel)
+ *
+ *             Where compression type is defined below.  If GPU model were
+ *             implied by the format modifier, format, or memory buffer, page
+ *             kind would not need to be included in the modifier itself, but
+ *             since the modifier should define the layout of the associated
+ *             memory buffer independent from any device or other context, it
+ *             must be included here.
+ *
+ * 21:20 g     GOB Height and Page Kind Generation.  The height of a GOB changed
+ *             starting with Fermi GPUs.  Additionally, the mapping between page
+ *             kind and bit layout has changed at various points.
+ *
+ *               0 = Gob Height 8, Fermi - Volta, Tegra K1+ Page Kind mapping
+ *               1 = Gob Height 4, G80 - GT2XX Page Kind mapping
+ *               2 = Gob Height 8, Turing+ Page Kind mapping
+ *               3 = Reserved for future use.
+ *
+ * 22:22 s     Sector layout.  On Tegra GPUs prior to Xavier, there is a further
+ *             bit remapping step that occurs at an even lower level than the
+ *             page kind and block linear swizzles.  This causes the layout of
+ *             surfaces mapped in those SOC's GPUs to be incompatible with the
+ *             equivalent mapping on other GPUs in the same system.
+ *
+ *               0 = Tegra K1 - Tegra Parker/TX2 Layout.
+ *               1 = Desktop GPU and Tegra Xavier+ Layout
+ *
+ * 25:23 c     Lossless Framebuffer Compression type.
+ *
+ *               0 = none
+ *               1 = ROP/3D, layout 1, exact compression format implied by Page
+ *                   Kind field
+ *               2 = ROP/3D, layout 2, exact compression format implied by Page
+ *                   Kind field
+ *               3 = CDE horizontal
+ *               4 = CDE vertical
+ *               5 = Reserved for future use
+ *               6 = Reserved for future use
+ *               7 = Reserved for future use
+ *
+ * 55:25 -     Reserved for future use.  Must be zero.
+ */
+#define DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D(c, s, g, k, h) \
+	fourcc_mod_code(NVIDIA, (0x10 | \
+				 ((h) & 0xf) | \
+				 (((k) & 0xff) << 12) | \
+				 (((g) & 0x3) << 20) | \
+				 (((s) & 0x1) << 22) | \
+				 (((c) & 0x7) << 23)))
+
+/* To grandfather in prior block linear format modifiers to the above layout,
+ * the page kind "0", which corresponds to "pitch/linear" and hence is unusable
+ * with block-linear layouts, is remapped within drivers to the value 0xfe,
+ * which corresponds to the "generic" kind used for simple single-sample
+ * uncompressed color formats on Fermi - Volta GPUs.
+ */
+static __inline__ __u64
+drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier)
+{
+	if (!(modifier & 0x10) || (modifier & (0xff << 12)))
+		return modifier;
+	else
+		return modifier | (0xfe << 12);
+}
+
+/*
+ * 16Bx2 Block Linear layout, used by Tegra K1 and later
+ *
+ * Pixels are arranged in 64x8 Groups Of Bytes (GOBs). GOBs are then stacked
+ * vertically by a power of 2 (1 to 32 GOBs) to form a block.
+ *
+ * Within a GOB, data is ordered as 16B x 2 lines sectors laid in Z-shape.
+ *
+ * Parameter 'v' is the log2 encoding of the number of GOBs stacked vertically.
+ * Valid values are:
+ *
+ * 0 == ONE_GOB
+ * 1 == TWO_GOBS
+ * 2 == FOUR_GOBS
+ * 3 == EIGHT_GOBS
+ * 4 == SIXTEEN_GOBS
+ * 5 == THIRTYTWO_GOBS
+ *
+ * Chapter 20 "Pixel Memory Formats" of the Tegra X1 TRM describes this format
+ * in full detail.
+ */
+#define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(v) \
+	DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D(0, 0, 0, 0, (v))
+
+#define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_ONE_GOB \
+	DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(0)
+#define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_TWO_GOB \
+	DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(1)
+#define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_FOUR_GOB \
+	DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(2)
+#define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_EIGHT_GOB \
+	DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(3)
+#define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_SIXTEEN_GOB \
+	DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(4)
+#define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_THIRTYTWO_GOB \
+	DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(5)
+
+/*
+ * Some Broadcom modifiers take parameters, for example the number of
+ * vertical lines in the image. Reserve the lower 32 bits for modifier
+ * type, and the next 24 bits for parameters. Top 8 bits are the
+ * vendor code.
+ */
+#define __fourcc_mod_broadcom_param_shift 8
+#define __fourcc_mod_broadcom_param_bits 48
+#define fourcc_mod_broadcom_code(val, params) \
+	fourcc_mod_code(BROADCOM, ((((__u64)params) << __fourcc_mod_broadcom_param_shift) | val))
+#define fourcc_mod_broadcom_param(m) \
+	((int)(((m) >> __fourcc_mod_broadcom_param_shift) &	\
+	       ((1ULL << __fourcc_mod_broadcom_param_bits) - 1)))
+#define fourcc_mod_broadcom_mod(m) \
+	((m) & ~(((1ULL << __fourcc_mod_broadcom_param_bits) - 1) <<	\
+		 __fourcc_mod_broadcom_param_shift))
+
+/*
+ * Broadcom VC4 "T" format
+ *
+ * This is the primary layout that the V3D GPU can texture from (it
+ * can't do linear).  The T format has:
+ *
+ * - 64b utiles of pixels in a raster-order grid according to cpp.  It's 4x4
+ *   pixels at 32 bit depth.
+ *
+ * - 1k subtiles made of a 4x4 raster-order grid of 64b utiles (so usually
+ *   16x16 pixels).
+ *
+ * - 4k tiles made of a 2x2 grid of 1k subtiles (so usually 32x32 pixels).  On
+ *   even 4k tile rows, they're arranged as (BL, TL, TR, BR), and on odd rows
+ *   they're (TR, BR, BL, TL), where bottom left is start of memory.
+ *
+ * - an image made of 4k tiles in rows either left-to-right (even rows of 4k
+ *   tiles) or right-to-left (odd rows of 4k tiles).
+ */
+#define DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED fourcc_mod_code(BROADCOM, 1)
+
+/*
+ * Broadcom SAND format
+ *
+ * This is the native format that the H.264 codec block uses.  For VC4
+ * HVS, it is only valid for H.264 (NV12/21) and RGBA modes.
+ *
+ * The image can be considered to be split into columns, and the
+ * columns are placed consecutively into memory.  The width of those
+ * columns can be either 32, 64, 128, or 256 pixels, but in practice
+ * only 128 pixel columns are used.
+ *
+ * The pitch between the start of each column is set to optimally
+ * switch between SDRAM banks. This is passed as the number of lines
+ * of column width in the modifier (we can't use the stride value due
+ * to various core checks that look at it , so you should set the
+ * stride to width*cpp).
+ *
+ * Note that the column height for this format modifier is the same
+ * for all of the planes, assuming that each column contains both Y
+ * and UV.  Some SAND-using hardware stores UV in a separate tiled
+ * image from Y to reduce the column height, which is not supported
+ * with these modifiers.
+ *
+ * The DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT modifier is also
+ * supported for DRM_FORMAT_P030 where the columns remain as 128 bytes
+ * wide, but as this is a 10 bpp format that translates to 96 pixels.
+ */
+
+#define DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(v) \
+	fourcc_mod_broadcom_code(2, v)
+#define DRM_FORMAT_MOD_BROADCOM_SAND64_COL_HEIGHT(v) \
+	fourcc_mod_broadcom_code(3, v)
+#define DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT(v) \
+	fourcc_mod_broadcom_code(4, v)
+#define DRM_FORMAT_MOD_BROADCOM_SAND256_COL_HEIGHT(v) \
+	fourcc_mod_broadcom_code(5, v)
+
+#define DRM_FORMAT_MOD_BROADCOM_SAND32 \
+	DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(0)
+#define DRM_FORMAT_MOD_BROADCOM_SAND64 \
+	DRM_FORMAT_MOD_BROADCOM_SAND64_COL_HEIGHT(0)
+#define DRM_FORMAT_MOD_BROADCOM_SAND128 \
+	DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT(0)
+#define DRM_FORMAT_MOD_BROADCOM_SAND256 \
+	DRM_FORMAT_MOD_BROADCOM_SAND256_COL_HEIGHT(0)
+
+/* Broadcom UIF format
+ *
+ * This is the common format for the current Broadcom multimedia
+ * blocks, including V3D 3.x and newer, newer video codecs, and
+ * displays.
+ *
+ * The image consists of utiles (64b blocks), UIF blocks (2x2 utiles),
+ * and macroblocks (4x4 UIF blocks).  Those 4x4 UIF block groups are
+ * stored in columns, with padding between the columns to ensure that
+ * moving from one column to the next doesn't hit the same SDRAM page
+ * bank.
+ *
+ * To calculate the padding, it is assumed that each hardware block
+ * and the software driving it knows the platform's SDRAM page size,
+ * number of banks, and XOR address, and that it's identical between
+ * all blocks using the format.  This tiling modifier will use XOR as
+ * necessary to reduce the padding.  If a hardware block can't do XOR,
+ * the assumption is that a no-XOR tiling modifier will be created.
+ */
+#define DRM_FORMAT_MOD_BROADCOM_UIF fourcc_mod_code(BROADCOM, 6)
+
+/*
+ * Arm Framebuffer Compression (AFBC) modifiers
+ *
+ * AFBC is a proprietary lossless image compression protocol and format.
+ * It provides fine-grained random access and minimizes the amount of data
+ * transferred between IP blocks.
+ *
+ * AFBC has several features which may be supported and/or used, which are
+ * represented using bits in the modifier. Not all combinations are valid,
+ * and different devices or use-cases may support different combinations.
+ *
+ * Further information on the use of AFBC modifiers can be found in
+ * Documentation/gpu/afbc.rst
+ */
+
+/*
+ * The top 4 bits (out of the 56 bits alloted for specifying vendor specific
+ * modifiers) denote the category for modifiers. Currently we have three
+ * categories of modifiers ie AFBC, MISC and AFRC. We can have a maximum of
+ * sixteen different categories.
+ */
+#define DRM_FORMAT_MOD_ARM_CODE(__type, __val) \
+	fourcc_mod_code(ARM, ((__u64)(__type) << 52) | ((__val) & 0x000fffffffffffffULL))
+
+#define DRM_FORMAT_MOD_ARM_TYPE_AFBC 0x00
+#define DRM_FORMAT_MOD_ARM_TYPE_MISC 0x01
+
+#define DRM_FORMAT_MOD_ARM_AFBC(__afbc_mode) \
+	DRM_FORMAT_MOD_ARM_CODE(DRM_FORMAT_MOD_ARM_TYPE_AFBC, __afbc_mode)
+
+/*
+ * AFBC superblock size
+ *
+ * Indicates the superblock size(s) used for the AFBC buffer. The buffer
+ * size (in pixels) must be aligned to a multiple of the superblock size.
+ * Four lowest significant bits(LSBs) are reserved for block size.
+ *
+ * Where one superblock size is specified, it applies to all planes of the
+ * buffer (e.g. 16x16, 32x8). When multiple superblock sizes are specified,
+ * the first applies to the Luma plane and the second applies to the Chroma
+ * plane(s). e.g. (32x8_64x4 means 32x8 Luma, with 64x4 Chroma).
+ * Multiple superblock sizes are only valid for multi-plane YCbCr formats.
+ */
+#define AFBC_FORMAT_MOD_BLOCK_SIZE_MASK      0xf
+#define AFBC_FORMAT_MOD_BLOCK_SIZE_16x16     (1ULL)
+#define AFBC_FORMAT_MOD_BLOCK_SIZE_32x8      (2ULL)
+#define AFBC_FORMAT_MOD_BLOCK_SIZE_64x4      (3ULL)
+#define AFBC_FORMAT_MOD_BLOCK_SIZE_32x8_64x4 (4ULL)
+
+/*
+ * AFBC lossless colorspace transform
+ *
+ * Indicates that the buffer makes use of the AFBC lossless colorspace
+ * transform.
+ */
+#define AFBC_FORMAT_MOD_YTR     (1ULL <<  4)
+
+/*
+ * AFBC block-split
+ *
+ * Indicates that the payload of each superblock is split. The second
+ * half of the payload is positioned at a predefined offset from the start
+ * of the superblock payload.
+ */
+#define AFBC_FORMAT_MOD_SPLIT   (1ULL <<  5)
+
+/*
+ * AFBC sparse layout
+ *
+ * This flag indicates that the payload of each superblock must be stored at a
+ * predefined position relative to the other superblocks in the same AFBC
+ * buffer. This order is the same order used by the header buffer. In this mode
+ * each superblock is given the same amount of space as an uncompressed
+ * superblock of the particular format would require, rounding up to the next
+ * multiple of 128 bytes in size.
+ */
+#define AFBC_FORMAT_MOD_SPARSE  (1ULL <<  6)
+
+/*
+ * AFBC copy-block restrict
+ *
+ * Buffers with this flag must obey the copy-block restriction. The restriction
+ * is such that there are no copy-blocks referring across the border of 8x8
+ * blocks. For the subsampled data the 8x8 limitation is also subsampled.
+ */
+#define AFBC_FORMAT_MOD_CBR     (1ULL <<  7)
+
+/*
+ * AFBC tiled layout
+ *
+ * The tiled layout groups superblocks in 8x8 or 4x4 tiles, where all
+ * superblocks inside a tile are stored together in memory. 8x8 tiles are used
+ * for pixel formats up to and including 32 bpp while 4x4 tiles are used for
+ * larger bpp formats. The order between the tiles is scan line.
+ * When the tiled layout is used, the buffer size (in pixels) must be aligned
+ * to the tile size.
+ */
+#define AFBC_FORMAT_MOD_TILED   (1ULL <<  8)
+
+/*
+ * AFBC solid color blocks
+ *
+ * Indicates that the buffer makes use of solid-color blocks, whereby bandwidth
+ * can be reduced if a whole superblock is a single color.
+ */
+#define AFBC_FORMAT_MOD_SC      (1ULL <<  9)
+
+/*
+ * AFBC double-buffer
+ *
+ * Indicates that the buffer is allocated in a layout safe for front-buffer
+ * rendering.
+ */
+#define AFBC_FORMAT_MOD_DB      (1ULL << 10)
+
+/*
+ * AFBC buffer content hints
+ *
+ * Indicates that the buffer includes per-superblock content hints.
+ */
+#define AFBC_FORMAT_MOD_BCH     (1ULL << 11)
+
+/* AFBC uncompressed storage mode
+ *
+ * Indicates that the buffer is using AFBC uncompressed storage mode.
+ * In this mode all superblock payloads in the buffer use the uncompressed
+ * storage mode, which is usually only used for data which cannot be compressed.
+ * The buffer layout is the same as for AFBC buffers without USM set, this only
+ * affects the storage mode of the individual superblocks. Note that even a
+ * buffer without USM set may use uncompressed storage mode for some or all
+ * superblocks, USM just guarantees it for all.
+ */
+#define AFBC_FORMAT_MOD_USM	(1ULL << 12)
+
+/*
+ * Arm Fixed-Rate Compression (AFRC) modifiers
+ *
+ * AFRC is a proprietary fixed rate image compression protocol and format,
+ * designed to provide guaranteed bandwidth and memory footprint
+ * reductions in graphics and media use-cases.
+ *
+ * AFRC buffers consist of one or more planes, with the same components
+ * and meaning as an uncompressed buffer using the same pixel format.
+ *
+ * Within each plane, the pixel/luma/chroma values are grouped into
+ * "coding unit" blocks which are individually compressed to a
+ * fixed size (in bytes). All coding units within a given plane of a buffer
+ * store the same number of values, and have the same compressed size.
+ *
+ * The coding unit size is configurable, allowing different rates of compression.
+ *
+ * The start of each AFRC buffer plane must be aligned to an alignment granule which
+ * depends on the coding unit size.
+ *
+ * Coding Unit Size   Plane Alignment
+ * ----------------   ---------------
+ * 16 bytes           1024 bytes
+ * 24 bytes           512  bytes
+ * 32 bytes           2048 bytes
+ *
+ * Coding units are grouped into paging tiles. AFRC buffer dimensions must be aligned
+ * to a multiple of the paging tile dimensions.
+ * The dimensions of each paging tile depend on whether the buffer is optimised for
+ * scanline (SCAN layout) or rotated (ROT layout) access.
+ *
+ * Layout   Paging Tile Width   Paging Tile Height
+ * ------   -----------------   ------------------
+ * SCAN     16 coding units     4 coding units
+ * ROT      8  coding units     8 coding units
+ *
+ * The dimensions of each coding unit depend on the number of components
+ * in the compressed plane and whether the buffer is optimised for
+ * scanline (SCAN layout) or rotated (ROT layout) access.
+ *
+ * Number of Components in Plane   Layout      Coding Unit Width   Coding Unit Height
+ * -----------------------------   ---------   -----------------   ------------------
+ * 1                               SCAN        16 samples          4 samples
+ * Example: 16x4 luma samples in a 'Y' plane
+ *          16x4 chroma 'V' values, in the 'V' plane of a fully-planar YUV buffer
+ * -----------------------------   ---------   -----------------   ------------------
+ * 1                               ROT         8 samples           8 samples
+ * Example: 8x8 luma samples in a 'Y' plane
+ *          8x8 chroma 'V' values, in the 'V' plane of a fully-planar YUV buffer
+ * -----------------------------   ---------   -----------------   ------------------
+ * 2                               DONT CARE   8 samples           4 samples
+ * Example: 8x4 chroma pairs in the 'UV' plane of a semi-planar YUV buffer
+ * -----------------------------   ---------   -----------------   ------------------
+ * 3                               DONT CARE   4 samples           4 samples
+ * Example: 4x4 pixels in an RGB buffer without alpha
+ * -----------------------------   ---------   -----------------   ------------------
+ * 4                               DONT CARE   4 samples           4 samples
+ * Example: 4x4 pixels in an RGB buffer with alpha
+ */
+
+#define DRM_FORMAT_MOD_ARM_TYPE_AFRC 0x02
+
+#define DRM_FORMAT_MOD_ARM_AFRC(__afrc_mode) \
+	DRM_FORMAT_MOD_ARM_CODE(DRM_FORMAT_MOD_ARM_TYPE_AFRC, __afrc_mode)
+
+/*
+ * AFRC coding unit size modifier.
+ *
+ * Indicates the number of bytes used to store each compressed coding unit for
+ * one or more planes in an AFRC encoded buffer. The coding unit size for chrominance
+ * is the same for both Cb and Cr, which may be stored in separate planes.
+ *
+ * AFRC_FORMAT_MOD_CU_SIZE_P0 indicates the number of bytes used to store
+ * each compressed coding unit in the first plane of the buffer. For RGBA buffers
+ * this is the only plane, while for semi-planar and fully-planar YUV buffers,
+ * this corresponds to the luma plane.
+ *
+ * AFRC_FORMAT_MOD_CU_SIZE_P12 indicates the number of bytes used to store
+ * each compressed coding unit in the second and third planes in the buffer.
+ * For semi-planar and fully-planar YUV buffers, this corresponds to the chroma plane(s).
+ *
+ * For single-plane buffers, AFRC_FORMAT_MOD_CU_SIZE_P0 must be specified
+ * and AFRC_FORMAT_MOD_CU_SIZE_P12 must be zero.
+ * For semi-planar and fully-planar buffers, both AFRC_FORMAT_MOD_CU_SIZE_P0 and
+ * AFRC_FORMAT_MOD_CU_SIZE_P12 must be specified.
+ */
+#define AFRC_FORMAT_MOD_CU_SIZE_MASK 0xf
+#define AFRC_FORMAT_MOD_CU_SIZE_16 (1ULL)
+#define AFRC_FORMAT_MOD_CU_SIZE_24 (2ULL)
+#define AFRC_FORMAT_MOD_CU_SIZE_32 (3ULL)
+
+#define AFRC_FORMAT_MOD_CU_SIZE_P0(__afrc_cu_size) (__afrc_cu_size)
+#define AFRC_FORMAT_MOD_CU_SIZE_P12(__afrc_cu_size) ((__afrc_cu_size) << 4)
+
+/*
+ * AFRC scanline memory layout.
+ *
+ * Indicates if the buffer uses the scanline-optimised layout
+ * for an AFRC encoded buffer, otherwise, it uses the rotation-optimised layout.
+ * The memory layout is the same for all planes.
+ */
+#define AFRC_FORMAT_MOD_LAYOUT_SCAN (1ULL << 8)
+
+/*
+ * Arm 16x16 Block U-Interleaved modifier
+ *
+ * This is used by Arm Mali Utgard and Midgard GPUs. It divides the image
+ * into 16x16 pixel blocks. Blocks are stored linearly in order, but pixels
+ * in the block are reordered.
+ */
+#define DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED \
+	DRM_FORMAT_MOD_ARM_CODE(DRM_FORMAT_MOD_ARM_TYPE_MISC, 1ULL)
+
+/*
+ * Allwinner tiled modifier
+ *
+ * This tiling mode is implemented by the VPU found on all Allwinner platforms,
+ * codenamed sunxi. It is associated with a YUV format that uses either 2 or 3
+ * planes.
+ *
+ * With this tiling, the luminance samples are disposed in tiles representing
+ * 32x32 pixels and the chrominance samples in tiles representing 32x64 pixels.
+ * The pixel order in each tile is linear and the tiles are disposed linearly,
+ * both in row-major order.
+ */
+#define DRM_FORMAT_MOD_ALLWINNER_TILED fourcc_mod_code(ALLWINNER, 1)
+
+/*
+ * Amlogic Video Framebuffer Compression modifiers
+ *
+ * Amlogic uses a proprietary lossless image compression protocol and format
+ * for their hardware video codec accelerators, either video decoders or
+ * video input encoders.
+ *
+ * It considerably reduces memory bandwidth while writing and reading
+ * frames in memory.
+ *
+ * The underlying storage is considered to be 3 components, 8bit or 10-bit
+ * per component YCbCr 420, single plane :
+ * - DRM_FORMAT_YUV420_8BIT
+ * - DRM_FORMAT_YUV420_10BIT
+ *
+ * The first 8 bits of the mode defines the layout, then the following 8 bits
+ * defines the options changing the layout.
+ *
+ * Not all combinations are valid, and different SoCs may support different
+ * combinations of layout and options.
+ */
+#define __fourcc_mod_amlogic_layout_mask 0xff
+#define __fourcc_mod_amlogic_options_shift 8
+#define __fourcc_mod_amlogic_options_mask 0xff
+
+#define DRM_FORMAT_MOD_AMLOGIC_FBC(__layout, __options) \
+	fourcc_mod_code(AMLOGIC, \
+			((__layout) & __fourcc_mod_amlogic_layout_mask) | \
+			(((__options) & __fourcc_mod_amlogic_options_mask) \
+			 << __fourcc_mod_amlogic_options_shift))
+
+/* Amlogic FBC Layouts */
+
+/*
+ * Amlogic FBC Basic Layout
+ *
+ * The basic layout is composed of:
+ * - a body content organized in 64x32 superblocks with 4096 bytes per
+ *   superblock in default mode.
+ * - a 32 bytes per 128x64 header block
+ *
+ * This layout is transferrable between Amlogic SoCs supporting this modifier.
+ */
+#define AMLOGIC_FBC_LAYOUT_BASIC		(1ULL)
+
+/*
+ * Amlogic FBC Scatter Memory layout
+ *
+ * Indicates the header contains IOMMU references to the compressed
+ * frames content to optimize memory access and layout.
+ *
+ * In this mode, only the header memory address is needed, thus the
+ * content memory organization is tied to the current producer
+ * execution and cannot be saved/dumped neither transferrable between
+ * Amlogic SoCs supporting this modifier.
+ *
+ * Due to the nature of the layout, these buffers are not expected to
+ * be accessible by the user-space clients, but only accessible by the
+ * hardware producers and consumers.
+ *
+ * The user-space clients should expect a failure while trying to mmap
+ * the DMA-BUF handle returned by the producer.
+ */
+#define AMLOGIC_FBC_LAYOUT_SCATTER		(2ULL)
+
+/* Amlogic FBC Layout Options Bit Mask */
+
+/*
+ * Amlogic FBC Memory Saving mode
+ *
+ * Indicates the storage is packed when pixel size is multiple of word
+ * boudaries, i.e. 8bit should be stored in this mode to save allocation
+ * memory.
+ *
+ * This mode reduces body layout to 3072 bytes per 64x32 superblock with
+ * the basic layout and 3200 bytes per 64x32 superblock combined with
+ * the scatter layout.
+ */
+#define AMLOGIC_FBC_OPTION_MEM_SAVING		(1ULL << 0)
+
+/*
+ * AMD modifiers
+ *
+ * Memory layout:
+ *
+ * without DCC:
+ *   - main surface
+ *
+ * with DCC & without DCC_RETILE:
+ *   - main surface in plane 0
+ *   - DCC surface in plane 1 (RB-aligned, pipe-aligned if DCC_PIPE_ALIGN is set)
+ *
+ * with DCC & DCC_RETILE:
+ *   - main surface in plane 0
+ *   - displayable DCC surface in plane 1 (not RB-aligned & not pipe-aligned)
+ *   - pipe-aligned DCC surface in plane 2 (RB-aligned & pipe-aligned)
+ *
+ * For multi-plane formats the above surfaces get merged into one plane for
+ * each format plane, based on the required alignment only.
+ *
+ * Bits  Parameter                Notes
+ * ----- ------------------------ ---------------------------------------------
+ *
+ *   7:0 TILE_VERSION             Values are AMD_FMT_MOD_TILE_VER_*
+ *  12:8 TILE                     Values are AMD_FMT_MOD_TILE_<version>_*
+ *    13 DCC
+ *    14 DCC_RETILE
+ *    15 DCC_PIPE_ALIGN
+ *    16 DCC_INDEPENDENT_64B
+ *    17 DCC_INDEPENDENT_128B
+ * 19:18 DCC_MAX_COMPRESSED_BLOCK Values are AMD_FMT_MOD_DCC_BLOCK_*
+ *    20 DCC_CONSTANT_ENCODE
+ * 23:21 PIPE_XOR_BITS            Only for some chips
+ * 26:24 BANK_XOR_BITS            Only for some chips
+ * 29:27 PACKERS                  Only for some chips
+ * 32:30 RB                       Only for some chips
+ * 35:33 PIPE                     Only for some chips
+ * 55:36 -                        Reserved for future use, must be zero
+ */
+#define AMD_FMT_MOD fourcc_mod_code(AMD, 0)
+
+#define IS_AMD_FMT_MOD(val) (((val) >> 56) == DRM_FORMAT_MOD_VENDOR_AMD)
+
+/* Reserve 0 for GFX8 and older */
+#define AMD_FMT_MOD_TILE_VER_GFX9 1
+#define AMD_FMT_MOD_TILE_VER_GFX10 2
+#define AMD_FMT_MOD_TILE_VER_GFX10_RBPLUS 3
+#define AMD_FMT_MOD_TILE_VER_GFX11 4
+
+/*
+ * 64K_S is the same for GFX9/GFX10/GFX10_RBPLUS and hence has GFX9 as canonical
+ * version.
+ */
+#define AMD_FMT_MOD_TILE_GFX9_64K_S 9
+
+/*
+ * 64K_D for non-32 bpp is the same for GFX9/GFX10/GFX10_RBPLUS and hence has
+ * GFX9 as canonical version.
+ */
+#define AMD_FMT_MOD_TILE_GFX9_64K_D 10
+#define AMD_FMT_MOD_TILE_GFX9_64K_S_X 25
+#define AMD_FMT_MOD_TILE_GFX9_64K_D_X 26
+#define AMD_FMT_MOD_TILE_GFX9_64K_R_X 27
+#define AMD_FMT_MOD_TILE_GFX11_256K_R_X 31
+
+#define AMD_FMT_MOD_DCC_BLOCK_64B 0
+#define AMD_FMT_MOD_DCC_BLOCK_128B 1
+#define AMD_FMT_MOD_DCC_BLOCK_256B 2
+
+#define AMD_FMT_MOD_TILE_VERSION_SHIFT 0
+#define AMD_FMT_MOD_TILE_VERSION_MASK 0xFF
+#define AMD_FMT_MOD_TILE_SHIFT 8
+#define AMD_FMT_MOD_TILE_MASK 0x1F
+
+/* Whether DCC compression is enabled. */
+#define AMD_FMT_MOD_DCC_SHIFT 13
+#define AMD_FMT_MOD_DCC_MASK 0x1
+
+/*
+ * Whether to include two DCC surfaces, one which is rb & pipe aligned, and
+ * one which is not-aligned.
+ */
+#define AMD_FMT_MOD_DCC_RETILE_SHIFT 14
+#define AMD_FMT_MOD_DCC_RETILE_MASK 0x1
+
+/* Only set if DCC_RETILE = false */
+#define AMD_FMT_MOD_DCC_PIPE_ALIGN_SHIFT 15
+#define AMD_FMT_MOD_DCC_PIPE_ALIGN_MASK 0x1
+
+#define AMD_FMT_MOD_DCC_INDEPENDENT_64B_SHIFT 16
+#define AMD_FMT_MOD_DCC_INDEPENDENT_64B_MASK 0x1
+#define AMD_FMT_MOD_DCC_INDEPENDENT_128B_SHIFT 17
+#define AMD_FMT_MOD_DCC_INDEPENDENT_128B_MASK 0x1
+#define AMD_FMT_MOD_DCC_MAX_COMPRESSED_BLOCK_SHIFT 18
+#define AMD_FMT_MOD_DCC_MAX_COMPRESSED_BLOCK_MASK 0x3
+
+/*
+ * DCC supports embedding some clear colors directly in the DCC surface.
+ * However, on older GPUs the rendering HW ignores the embedded clear color
+ * and prefers the driver provided color. This necessitates doing a fastclear
+ * eliminate operation before a process transfers control.
+ *
+ * If this bit is set that means the fastclear eliminate is not needed for these
+ * embeddable colors.
+ */
+#define AMD_FMT_MOD_DCC_CONSTANT_ENCODE_SHIFT 20
+#define AMD_FMT_MOD_DCC_CONSTANT_ENCODE_MASK 0x1
+
+/*
+ * The below fields are for accounting for per GPU differences. These are only
+ * relevant for GFX9 and later and if the tile field is *_X/_T.
+ *
+ * PIPE_XOR_BITS = always needed
+ * BANK_XOR_BITS = only for TILE_VER_GFX9
+ * PACKERS = only for TILE_VER_GFX10_RBPLUS
+ * RB = only for TILE_VER_GFX9 & DCC
+ * PIPE = only for TILE_VER_GFX9 & DCC & (DCC_RETILE | DCC_PIPE_ALIGN)
+ */
+#define AMD_FMT_MOD_PIPE_XOR_BITS_SHIFT 21
+#define AMD_FMT_MOD_PIPE_XOR_BITS_MASK 0x7
+#define AMD_FMT_MOD_BANK_XOR_BITS_SHIFT 24
+#define AMD_FMT_MOD_BANK_XOR_BITS_MASK 0x7
+#define AMD_FMT_MOD_PACKERS_SHIFT 27
+#define AMD_FMT_MOD_PACKERS_MASK 0x7
+#define AMD_FMT_MOD_RB_SHIFT 30
+#define AMD_FMT_MOD_RB_MASK 0x7
+#define AMD_FMT_MOD_PIPE_SHIFT 33
+#define AMD_FMT_MOD_PIPE_MASK 0x7
+
+#define AMD_FMT_MOD_SET(field, value) \
+	((__u64)(value) << AMD_FMT_MOD_##field##_SHIFT)
+#define AMD_FMT_MOD_GET(field, value) \
+	(((value) >> AMD_FMT_MOD_##field##_SHIFT) & AMD_FMT_MOD_##field##_MASK)
+#define AMD_FMT_MOD_CLEAR(field) \
+	(~((__u64)AMD_FMT_MOD_##field##_MASK << AMD_FMT_MOD_##field##_SHIFT))
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* DRM_FOURCC_H */
diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h
new file mode 100644
index 0000000..95630f1
--- /dev/null
+++ b/include/drm/drm_mode.h
@@ -0,0 +1,1349 @@
+/*
+ * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (c) 2007 Jakob Bornecrantz <wallbraker@gmail.com>
+ * Copyright (c) 2008 Red Hat Inc.
+ * Copyright (c) 2007-2008 Tungsten Graphics, Inc., Cedar Park, TX., USA
+ * Copyright (c) 2007-2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_MODE_H
+#define _DRM_MODE_H
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/**
+ * DOC: overview
+ *
+ * DRM exposes many UAPI and structure definition to have a consistent
+ * and standardized interface with user.
+ * Userspace can refer to these structure definitions and UAPI formats
+ * to communicate to driver
+ */
+
+#define DRM_CONNECTOR_NAME_LEN	32
+#define DRM_DISPLAY_MODE_LEN	32
+#define DRM_PROP_NAME_LEN	32
+
+#define DRM_MODE_TYPE_BUILTIN	(1<<0) /* deprecated */
+#define DRM_MODE_TYPE_CLOCK_C	((1<<1) | DRM_MODE_TYPE_BUILTIN) /* deprecated */
+#define DRM_MODE_TYPE_CRTC_C	((1<<2) | DRM_MODE_TYPE_BUILTIN) /* deprecated */
+#define DRM_MODE_TYPE_PREFERRED	(1<<3)
+#define DRM_MODE_TYPE_DEFAULT	(1<<4) /* deprecated */
+#define DRM_MODE_TYPE_USERDEF	(1<<5)
+#define DRM_MODE_TYPE_DRIVER	(1<<6)
+
+#define DRM_MODE_TYPE_ALL	(DRM_MODE_TYPE_PREFERRED |	\
+				 DRM_MODE_TYPE_USERDEF |	\
+				 DRM_MODE_TYPE_DRIVER)
+
+/* Video mode flags */
+/* bit compatible with the xrandr RR_ definitions (bits 0-13)
+ *
+ * ABI warning: Existing userspace really expects
+ * the mode flags to match the xrandr definitions. Any
+ * changes that don't match the xrandr definitions will
+ * likely need a new client cap or some other mechanism
+ * to avoid breaking existing userspace. This includes
+ * allocating new flags in the previously unused bits!
+ */
+#define DRM_MODE_FLAG_PHSYNC			(1<<0)
+#define DRM_MODE_FLAG_NHSYNC			(1<<1)
+#define DRM_MODE_FLAG_PVSYNC			(1<<2)
+#define DRM_MODE_FLAG_NVSYNC			(1<<3)
+#define DRM_MODE_FLAG_INTERLACE			(1<<4)
+#define DRM_MODE_FLAG_DBLSCAN			(1<<5)
+#define DRM_MODE_FLAG_CSYNC			(1<<6)
+#define DRM_MODE_FLAG_PCSYNC			(1<<7)
+#define DRM_MODE_FLAG_NCSYNC			(1<<8)
+#define DRM_MODE_FLAG_HSKEW			(1<<9) /* hskew provided */
+#define DRM_MODE_FLAG_BCAST			(1<<10) /* deprecated */
+#define DRM_MODE_FLAG_PIXMUX			(1<<11) /* deprecated */
+#define DRM_MODE_FLAG_DBLCLK			(1<<12)
+#define DRM_MODE_FLAG_CLKDIV2			(1<<13)
+ /*
+  * When adding a new stereo mode don't forget to adjust DRM_MODE_FLAGS_3D_MAX
+  * (define not exposed to user space).
+  */
+#define DRM_MODE_FLAG_3D_MASK			(0x1f<<14)
+#define  DRM_MODE_FLAG_3D_NONE		(0<<14)
+#define  DRM_MODE_FLAG_3D_FRAME_PACKING		(1<<14)
+#define  DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE	(2<<14)
+#define  DRM_MODE_FLAG_3D_LINE_ALTERNATIVE	(3<<14)
+#define  DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL	(4<<14)
+#define  DRM_MODE_FLAG_3D_L_DEPTH		(5<<14)
+#define  DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH	(6<<14)
+#define  DRM_MODE_FLAG_3D_TOP_AND_BOTTOM	(7<<14)
+#define  DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF	(8<<14)
+
+/* Picture aspect ratio options */
+#define DRM_MODE_PICTURE_ASPECT_NONE		0
+#define DRM_MODE_PICTURE_ASPECT_4_3		1
+#define DRM_MODE_PICTURE_ASPECT_16_9		2
+#define DRM_MODE_PICTURE_ASPECT_64_27		3
+#define DRM_MODE_PICTURE_ASPECT_256_135		4
+
+/* Content type options */
+#define DRM_MODE_CONTENT_TYPE_NO_DATA		0
+#define DRM_MODE_CONTENT_TYPE_GRAPHICS		1
+#define DRM_MODE_CONTENT_TYPE_PHOTO		2
+#define DRM_MODE_CONTENT_TYPE_CINEMA		3
+#define DRM_MODE_CONTENT_TYPE_GAME		4
+
+/* Aspect ratio flag bitmask (4 bits 22:19) */
+#define DRM_MODE_FLAG_PIC_AR_MASK		(0x0F<<19)
+#define  DRM_MODE_FLAG_PIC_AR_NONE \
+			(DRM_MODE_PICTURE_ASPECT_NONE<<19)
+#define  DRM_MODE_FLAG_PIC_AR_4_3 \
+			(DRM_MODE_PICTURE_ASPECT_4_3<<19)
+#define  DRM_MODE_FLAG_PIC_AR_16_9 \
+			(DRM_MODE_PICTURE_ASPECT_16_9<<19)
+#define  DRM_MODE_FLAG_PIC_AR_64_27 \
+			(DRM_MODE_PICTURE_ASPECT_64_27<<19)
+#define  DRM_MODE_FLAG_PIC_AR_256_135 \
+			(DRM_MODE_PICTURE_ASPECT_256_135<<19)
+
+#define  DRM_MODE_FLAG_ALL	(DRM_MODE_FLAG_PHSYNC |		\
+				 DRM_MODE_FLAG_NHSYNC |		\
+				 DRM_MODE_FLAG_PVSYNC |		\
+				 DRM_MODE_FLAG_NVSYNC |		\
+				 DRM_MODE_FLAG_INTERLACE |	\
+				 DRM_MODE_FLAG_DBLSCAN |	\
+				 DRM_MODE_FLAG_CSYNC |		\
+				 DRM_MODE_FLAG_PCSYNC |		\
+				 DRM_MODE_FLAG_NCSYNC |		\
+				 DRM_MODE_FLAG_HSKEW |		\
+				 DRM_MODE_FLAG_DBLCLK |		\
+				 DRM_MODE_FLAG_CLKDIV2 |	\
+				 DRM_MODE_FLAG_3D_MASK)
+
+/* DPMS flags */
+/* bit compatible with the xorg definitions. */
+#define DRM_MODE_DPMS_ON	0
+#define DRM_MODE_DPMS_STANDBY	1
+#define DRM_MODE_DPMS_SUSPEND	2
+#define DRM_MODE_DPMS_OFF	3
+
+/* Scaling mode options */
+#define DRM_MODE_SCALE_NONE		0 /* Unmodified timing (display or
+					     software can still scale) */
+#define DRM_MODE_SCALE_FULLSCREEN	1 /* Full screen, ignore aspect */
+#define DRM_MODE_SCALE_CENTER		2 /* Centered, no scaling */
+#define DRM_MODE_SCALE_ASPECT		3 /* Full screen, preserve aspect */
+
+/* Dithering mode options */
+#define DRM_MODE_DITHERING_OFF	0
+#define DRM_MODE_DITHERING_ON	1
+#define DRM_MODE_DITHERING_AUTO 2
+
+/* Dirty info options */
+#define DRM_MODE_DIRTY_OFF      0
+#define DRM_MODE_DIRTY_ON       1
+#define DRM_MODE_DIRTY_ANNOTATE 2
+
+/* Link Status options */
+#define DRM_MODE_LINK_STATUS_GOOD	0
+#define DRM_MODE_LINK_STATUS_BAD	1
+
+/*
+ * DRM_MODE_ROTATE_<degrees>
+ *
+ * Signals that a drm plane is been rotated <degrees> degrees in counter
+ * clockwise direction.
+ *
+ * This define is provided as a convenience, looking up the property id
+ * using the name->prop id lookup is the preferred method.
+ */
+#define DRM_MODE_ROTATE_0       (1<<0)
+#define DRM_MODE_ROTATE_90      (1<<1)
+#define DRM_MODE_ROTATE_180     (1<<2)
+#define DRM_MODE_ROTATE_270     (1<<3)
+
+/*
+ * DRM_MODE_ROTATE_MASK
+ *
+ * Bitmask used to look for drm plane rotations.
+ */
+#define DRM_MODE_ROTATE_MASK (\
+		DRM_MODE_ROTATE_0  | \
+		DRM_MODE_ROTATE_90  | \
+		DRM_MODE_ROTATE_180 | \
+		DRM_MODE_ROTATE_270)
+
+/*
+ * DRM_MODE_REFLECT_<axis>
+ *
+ * Signals that the contents of a drm plane is reflected along the <axis> axis,
+ * in the same way as mirroring.
+ * See kerneldoc chapter "Plane Composition Properties" for more details.
+ *
+ * This define is provided as a convenience, looking up the property id
+ * using the name->prop id lookup is the preferred method.
+ */
+#define DRM_MODE_REFLECT_X      (1<<4)
+#define DRM_MODE_REFLECT_Y      (1<<5)
+
+/*
+ * DRM_MODE_REFLECT_MASK
+ *
+ * Bitmask used to look for drm plane reflections.
+ */
+#define DRM_MODE_REFLECT_MASK (\
+		DRM_MODE_REFLECT_X | \
+		DRM_MODE_REFLECT_Y)
+
+/* Content Protection Flags */
+#define DRM_MODE_CONTENT_PROTECTION_UNDESIRED	0
+#define DRM_MODE_CONTENT_PROTECTION_DESIRED     1
+#define DRM_MODE_CONTENT_PROTECTION_ENABLED     2
+
+/**
+ * struct drm_mode_modeinfo - Display mode information.
+ * @clock: pixel clock in kHz
+ * @hdisplay: horizontal display size
+ * @hsync_start: horizontal sync start
+ * @hsync_end: horizontal sync end
+ * @htotal: horizontal total size
+ * @hskew: horizontal skew
+ * @vdisplay: vertical display size
+ * @vsync_start: vertical sync start
+ * @vsync_end: vertical sync end
+ * @vtotal: vertical total size
+ * @vscan: vertical scan
+ * @vrefresh: approximate vertical refresh rate in Hz
+ * @flags: bitmask of misc. flags, see DRM_MODE_FLAG_* defines
+ * @type: bitmask of type flags, see DRM_MODE_TYPE_* defines
+ * @name: string describing the mode resolution
+ *
+ * This is the user-space API display mode information structure. For the
+ * kernel version see struct drm_display_mode.
+ */
+struct drm_mode_modeinfo {
+	__u32 clock;
+	__u16 hdisplay;
+	__u16 hsync_start;
+	__u16 hsync_end;
+	__u16 htotal;
+	__u16 hskew;
+	__u16 vdisplay;
+	__u16 vsync_start;
+	__u16 vsync_end;
+	__u16 vtotal;
+	__u16 vscan;
+
+	__u32 vrefresh;
+
+	__u32 flags;
+	__u32 type;
+	char name[DRM_DISPLAY_MODE_LEN];
+};
+
+struct drm_mode_card_res {
+	__u64 fb_id_ptr;
+	__u64 crtc_id_ptr;
+	__u64 connector_id_ptr;
+	__u64 encoder_id_ptr;
+	__u32 count_fbs;
+	__u32 count_crtcs;
+	__u32 count_connectors;
+	__u32 count_encoders;
+	__u32 min_width;
+	__u32 max_width;
+	__u32 min_height;
+	__u32 max_height;
+};
+
+struct drm_mode_crtc {
+	__u64 set_connectors_ptr;
+	__u32 count_connectors;
+
+	__u32 crtc_id; /**< Id */
+	__u32 fb_id; /**< Id of framebuffer */
+
+	__u32 x; /**< x Position on the framebuffer */
+	__u32 y; /**< y Position on the framebuffer */
+
+	__u32 gamma_size;
+	__u32 mode_valid;
+	struct drm_mode_modeinfo mode;
+};
+
+#define DRM_MODE_PRESENT_TOP_FIELD	(1<<0)
+#define DRM_MODE_PRESENT_BOTTOM_FIELD	(1<<1)
+
+/* Planes blend with or override other bits on the CRTC */
+struct drm_mode_set_plane {
+	__u32 plane_id;
+	__u32 crtc_id;
+	__u32 fb_id; /* fb object contains surface format type */
+	__u32 flags; /* see above flags */
+
+	/* Signed dest location allows it to be partially off screen */
+	__s32 crtc_x;
+	__s32 crtc_y;
+	__u32 crtc_w;
+	__u32 crtc_h;
+
+	/* Source values are 16.16 fixed point */
+	__u32 src_x;
+	__u32 src_y;
+	__u32 src_h;
+	__u32 src_w;
+};
+
+/**
+ * struct drm_mode_get_plane - Get plane metadata.
+ *
+ * Userspace can perform a GETPLANE ioctl to retrieve information about a
+ * plane.
+ *
+ * To retrieve the number of formats supported, set @count_format_types to zero
+ * and call the ioctl. @count_format_types will be updated with the value.
+ *
+ * To retrieve these formats, allocate an array with the memory needed to store
+ * @count_format_types formats. Point @format_type_ptr to this array and call
+ * the ioctl again (with @count_format_types still set to the value returned in
+ * the first ioctl call).
+ */
+struct drm_mode_get_plane {
+	/**
+	 * @plane_id: Object ID of the plane whose information should be
+	 * retrieved. Set by caller.
+	 */
+	__u32 plane_id;
+
+	/** @crtc_id: Object ID of the current CRTC. */
+	__u32 crtc_id;
+	/** @fb_id: Object ID of the current fb. */
+	__u32 fb_id;
+
+	/**
+	 * @possible_crtcs: Bitmask of CRTC's compatible with the plane. CRTC's
+	 * are created and they receive an index, which corresponds to their
+	 * position in the bitmask. Bit N corresponds to
+	 * :ref:`CRTC index<crtc_index>` N.
+	 */
+	__u32 possible_crtcs;
+	/** @gamma_size: Never used. */
+	__u32 gamma_size;
+
+	/** @count_format_types: Number of formats. */
+	__u32 count_format_types;
+	/**
+	 * @format_type_ptr: Pointer to ``__u32`` array of formats that are
+	 * supported by the plane. These formats do not require modifiers.
+	 */
+	__u64 format_type_ptr;
+};
+
+struct drm_mode_get_plane_res {
+	__u64 plane_id_ptr;
+	__u32 count_planes;
+};
+
+#define DRM_MODE_ENCODER_NONE	0
+#define DRM_MODE_ENCODER_DAC	1
+#define DRM_MODE_ENCODER_TMDS	2
+#define DRM_MODE_ENCODER_LVDS	3
+#define DRM_MODE_ENCODER_TVDAC	4
+#define DRM_MODE_ENCODER_VIRTUAL 5
+#define DRM_MODE_ENCODER_DSI	6
+#define DRM_MODE_ENCODER_DPMST	7
+#define DRM_MODE_ENCODER_DPI	8
+
+struct drm_mode_get_encoder {
+	__u32 encoder_id;
+	__u32 encoder_type;
+
+	__u32 crtc_id; /**< Id of crtc */
+
+	__u32 possible_crtcs;
+	__u32 possible_clones;
+};
+
+/* This is for connectors with multiple signal types. */
+/* Try to match DRM_MODE_CONNECTOR_X as closely as possible. */
+enum drm_mode_subconnector {
+	DRM_MODE_SUBCONNECTOR_Automatic   = 0,  /* DVI-I, TV     */
+	DRM_MODE_SUBCONNECTOR_Unknown     = 0,  /* DVI-I, TV, DP */
+	DRM_MODE_SUBCONNECTOR_VGA	  = 1,  /*            DP */
+	DRM_MODE_SUBCONNECTOR_DVID	  = 3,  /* DVI-I      DP */
+	DRM_MODE_SUBCONNECTOR_DVIA	  = 4,  /* DVI-I         */
+	DRM_MODE_SUBCONNECTOR_Composite   = 5,  /*        TV     */
+	DRM_MODE_SUBCONNECTOR_SVIDEO	  = 6,  /*        TV     */
+	DRM_MODE_SUBCONNECTOR_Component   = 8,  /*        TV     */
+	DRM_MODE_SUBCONNECTOR_SCART	  = 9,  /*        TV     */
+	DRM_MODE_SUBCONNECTOR_DisplayPort = 10, /*            DP */
+	DRM_MODE_SUBCONNECTOR_HDMIA       = 11, /*            DP */
+	DRM_MODE_SUBCONNECTOR_Native      = 15, /*            DP */
+	DRM_MODE_SUBCONNECTOR_Wireless    = 18, /*            DP */
+};
+
+#define DRM_MODE_CONNECTOR_Unknown	0
+#define DRM_MODE_CONNECTOR_VGA		1
+#define DRM_MODE_CONNECTOR_DVII		2
+#define DRM_MODE_CONNECTOR_DVID		3
+#define DRM_MODE_CONNECTOR_DVIA		4
+#define DRM_MODE_CONNECTOR_Composite	5
+#define DRM_MODE_CONNECTOR_SVIDEO	6
+#define DRM_MODE_CONNECTOR_LVDS		7
+#define DRM_MODE_CONNECTOR_Component	8
+#define DRM_MODE_CONNECTOR_9PinDIN	9
+#define DRM_MODE_CONNECTOR_DisplayPort	10
+#define DRM_MODE_CONNECTOR_HDMIA	11
+#define DRM_MODE_CONNECTOR_HDMIB	12
+#define DRM_MODE_CONNECTOR_TV		13
+#define DRM_MODE_CONNECTOR_eDP		14
+#define DRM_MODE_CONNECTOR_VIRTUAL      15
+#define DRM_MODE_CONNECTOR_DSI		16
+#define DRM_MODE_CONNECTOR_DPI		17
+#define DRM_MODE_CONNECTOR_WRITEBACK	18
+#define DRM_MODE_CONNECTOR_SPI		19
+#define DRM_MODE_CONNECTOR_USB		20
+
+/**
+ * struct drm_mode_get_connector - Get connector metadata.
+ *
+ * User-space can perform a GETCONNECTOR ioctl to retrieve information about a
+ * connector. User-space is expected to retrieve encoders, modes and properties
+ * by performing this ioctl at least twice: the first time to retrieve the
+ * number of elements, the second time to retrieve the elements themselves.
+ *
+ * To retrieve the number of elements, set @count_props and @count_encoders to
+ * zero, set @count_modes to 1, and set @modes_ptr to a temporary struct
+ * drm_mode_modeinfo element.
+ *
+ * To retrieve the elements, allocate arrays for @encoders_ptr, @modes_ptr,
+ * @props_ptr and @prop_values_ptr, then set @count_modes, @count_props and
+ * @count_encoders to their capacity.
+ *
+ * Performing the ioctl only twice may be racy: the number of elements may have
+ * changed with a hotplug event in-between the two ioctls. User-space is
+ * expected to retry the last ioctl until the number of elements stabilizes.
+ * The kernel won't fill any array which doesn't have the expected length.
+ *
+ * **Force-probing a connector**
+ *
+ * If the @count_modes field is set to zero and the DRM client is the current
+ * DRM master, the kernel will perform a forced probe on the connector to
+ * refresh the connector status, modes and EDID. A forced-probe can be slow,
+ * might cause flickering and the ioctl will block.
+ *
+ * User-space needs to force-probe connectors to ensure their metadata is
+ * up-to-date at startup and after receiving a hot-plug event. User-space
+ * may perform a forced-probe when the user explicitly requests it. User-space
+ * shouldn't perform a forced-probe in other situations.
+ */
+struct drm_mode_get_connector {
+	/** @encoders_ptr: Pointer to ``__u32`` array of object IDs. */
+	__u64 encoders_ptr;
+	/** @modes_ptr: Pointer to struct drm_mode_modeinfo array. */
+	__u64 modes_ptr;
+	/** @props_ptr: Pointer to ``__u32`` array of property IDs. */
+	__u64 props_ptr;
+	/** @prop_values_ptr: Pointer to ``__u64`` array of property values. */
+	__u64 prop_values_ptr;
+
+	/** @count_modes: Number of modes. */
+	__u32 count_modes;
+	/** @count_props: Number of properties. */
+	__u32 count_props;
+	/** @count_encoders: Number of encoders. */
+	__u32 count_encoders;
+
+	/** @encoder_id: Object ID of the current encoder. */
+	__u32 encoder_id;
+	/** @connector_id: Object ID of the connector. */
+	__u32 connector_id;
+	/**
+	 * @connector_type: Type of the connector.
+	 *
+	 * See DRM_MODE_CONNECTOR_* defines.
+	 */
+	__u32 connector_type;
+	/**
+	 * @connector_type_id: Type-specific connector number.
+	 *
+	 * This is not an object ID. This is a per-type connector number. Each
+	 * (type, type_id) combination is unique across all connectors of a DRM
+	 * device.
+	 *
+	 * The (type, type_id) combination is not a stable identifier: the
+	 * type_id can change depending on the driver probe order.
+	 */
+	__u32 connector_type_id;
+
+	/**
+	 * @connection: Status of the connector.
+	 *
+	 * See enum drm_connector_status.
+	 */
+	__u32 connection;
+	/** @mm_width: Width of the connected sink in millimeters. */
+	__u32 mm_width;
+	/** @mm_height: Height of the connected sink in millimeters. */
+	__u32 mm_height;
+	/**
+	 * @subpixel: Subpixel order of the connected sink.
+	 *
+	 * See enum subpixel_order.
+	 */
+	__u32 subpixel;
+
+	/** @pad: Padding, must be zero. */
+	__u32 pad;
+};
+
+#define DRM_MODE_PROP_PENDING	(1<<0) /* deprecated, do not use */
+#define DRM_MODE_PROP_RANGE	(1<<1)
+#define DRM_MODE_PROP_IMMUTABLE	(1<<2)
+#define DRM_MODE_PROP_ENUM	(1<<3) /* enumerated type with text strings */
+#define DRM_MODE_PROP_BLOB	(1<<4)
+#define DRM_MODE_PROP_BITMASK	(1<<5) /* bitmask of enumerated types */
+
+/* non-extended types: legacy bitmask, one bit per type: */
+#define DRM_MODE_PROP_LEGACY_TYPE  ( \
+		DRM_MODE_PROP_RANGE | \
+		DRM_MODE_PROP_ENUM | \
+		DRM_MODE_PROP_BLOB | \
+		DRM_MODE_PROP_BITMASK)
+
+/* extended-types: rather than continue to consume a bit per type,
+ * grab a chunk of the bits to use as integer type id.
+ */
+#define DRM_MODE_PROP_EXTENDED_TYPE	0x0000ffc0
+#define DRM_MODE_PROP_TYPE(n)		((n) << 6)
+#define DRM_MODE_PROP_OBJECT		DRM_MODE_PROP_TYPE(1)
+#define DRM_MODE_PROP_SIGNED_RANGE	DRM_MODE_PROP_TYPE(2)
+
+/* the PROP_ATOMIC flag is used to hide properties from userspace that
+ * is not aware of atomic properties.  This is mostly to work around
+ * older userspace (DDX drivers) that read/write each prop they find,
+ * witout being aware that this could be triggering a lengthy modeset.
+ */
+#define DRM_MODE_PROP_ATOMIC        0x80000000
+
+/**
+ * struct drm_mode_property_enum - Description for an enum/bitfield entry.
+ * @value: numeric value for this enum entry.
+ * @name: symbolic name for this enum entry.
+ *
+ * See struct drm_property_enum for details.
+ */
+struct drm_mode_property_enum {
+	__u64 value;
+	char name[DRM_PROP_NAME_LEN];
+};
+
+/**
+ * struct drm_mode_get_property - Get property metadata.
+ *
+ * User-space can perform a GETPROPERTY ioctl to retrieve information about a
+ * property. The same property may be attached to multiple objects, see
+ * "Modeset Base Object Abstraction".
+ *
+ * The meaning of the @values_ptr field changes depending on the property type.
+ * See &drm_property.flags for more details.
+ *
+ * The @enum_blob_ptr and @count_enum_blobs fields are only meaningful when the
+ * property has the type &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK. For
+ * backwards compatibility, the kernel will always set @count_enum_blobs to
+ * zero when the property has the type &DRM_MODE_PROP_BLOB. User-space must
+ * ignore these two fields if the property has a different type.
+ *
+ * User-space is expected to retrieve values and enums by performing this ioctl
+ * at least twice: the first time to retrieve the number of elements, the
+ * second time to retrieve the elements themselves.
+ *
+ * To retrieve the number of elements, set @count_values and @count_enum_blobs
+ * to zero, then call the ioctl. @count_values will be updated with the number
+ * of elements. If the property has the type &DRM_MODE_PROP_ENUM or
+ * &DRM_MODE_PROP_BITMASK, @count_enum_blobs will be updated as well.
+ *
+ * To retrieve the elements themselves, allocate an array for @values_ptr and
+ * set @count_values to its capacity. If the property has the type
+ * &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK, allocate an array for
+ * @enum_blob_ptr and set @count_enum_blobs to its capacity. Calling the ioctl
+ * again will fill the arrays.
+ */
+struct drm_mode_get_property {
+	/** @values_ptr: Pointer to a ``__u64`` array. */
+	__u64 values_ptr;
+	/** @enum_blob_ptr: Pointer to a struct drm_mode_property_enum array. */
+	__u64 enum_blob_ptr;
+
+	/**
+	 * @prop_id: Object ID of the property which should be retrieved. Set
+	 * by the caller.
+	 */
+	__u32 prop_id;
+	/**
+	 * @flags: ``DRM_MODE_PROP_*`` bitfield. See &drm_property.flags for
+	 * a definition of the flags.
+	 */
+	__u32 flags;
+	/**
+	 * @name: Symbolic property name. User-space should use this field to
+	 * recognize properties.
+	 */
+	char name[DRM_PROP_NAME_LEN];
+
+	/** @count_values: Number of elements in @values_ptr. */
+	__u32 count_values;
+	/** @count_enum_blobs: Number of elements in @enum_blob_ptr. */
+	__u32 count_enum_blobs;
+};
+
+struct drm_mode_connector_set_property {
+	__u64 value;
+	__u32 prop_id;
+	__u32 connector_id;
+};
+
+#define DRM_MODE_OBJECT_CRTC 0xcccccccc
+#define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0
+#define DRM_MODE_OBJECT_ENCODER 0xe0e0e0e0
+#define DRM_MODE_OBJECT_MODE 0xdededede
+#define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0
+#define DRM_MODE_OBJECT_FB 0xfbfbfbfb
+#define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb
+#define DRM_MODE_OBJECT_PLANE 0xeeeeeeee
+#define DRM_MODE_OBJECT_ANY 0
+
+struct drm_mode_obj_get_properties {
+	__u64 props_ptr;
+	__u64 prop_values_ptr;
+	__u32 count_props;
+	__u32 obj_id;
+	__u32 obj_type;
+};
+
+struct drm_mode_obj_set_property {
+	__u64 value;
+	__u32 prop_id;
+	__u32 obj_id;
+	__u32 obj_type;
+};
+
+struct drm_mode_get_blob {
+	__u32 blob_id;
+	__u32 length;
+	__u64 data;
+};
+
+struct drm_mode_fb_cmd {
+	__u32 fb_id;
+	__u32 width;
+	__u32 height;
+	__u32 pitch;
+	__u32 bpp;
+	__u32 depth;
+	/* driver specific handle */
+	__u32 handle;
+};
+
+#define DRM_MODE_FB_INTERLACED	(1<<0) /* for interlaced framebuffers */
+#define DRM_MODE_FB_MODIFIERS	(1<<1) /* enables ->modifer[] */
+
+/**
+ * struct drm_mode_fb_cmd2 - Frame-buffer metadata.
+ *
+ * This struct holds frame-buffer metadata. There are two ways to use it:
+ *
+ * - User-space can fill this struct and perform a &DRM_IOCTL_MODE_ADDFB2
+ *   ioctl to register a new frame-buffer. The new frame-buffer object ID will
+ *   be set by the kernel in @fb_id.
+ * - User-space can set @fb_id and perform a &DRM_IOCTL_MODE_GETFB2 ioctl to
+ *   fetch metadata about an existing frame-buffer.
+ *
+ * In case of planar formats, this struct allows up to 4 buffer objects with
+ * offsets and pitches per plane. The pitch and offset order are dictated by
+ * the format FourCC as defined by ``drm_fourcc.h``, e.g. NV12 is described as:
+ *
+ *     YUV 4:2:0 image with a plane of 8-bit Y samples followed by an
+ *     interleaved U/V plane containing 8-bit 2x2 subsampled colour difference
+ *     samples.
+ *
+ * So it would consist of a Y plane at ``offsets[0]`` and a UV plane at
+ * ``offsets[1]``.
+ *
+ * To accommodate tiled, compressed, etc formats, a modifier can be specified.
+ * For more information see the "Format Modifiers" section. Note that even
+ * though it looks like we have a modifier per-plane, we in fact do not. The
+ * modifier for each plane must be identical. Thus all combinations of
+ * different data layouts for multi-plane formats must be enumerated as
+ * separate modifiers.
+ *
+ * All of the entries in @handles, @pitches, @offsets and @modifier must be
+ * zero when unused. Warning, for @offsets and @modifier zero can't be used to
+ * figure out whether the entry is used or not since it's a valid value (a zero
+ * offset is common, and a zero modifier is &DRM_FORMAT_MOD_LINEAR).
+ */
+struct drm_mode_fb_cmd2 {
+	/** @fb_id: Object ID of the frame-buffer. */
+	__u32 fb_id;
+	/** @width: Width of the frame-buffer. */
+	__u32 width;
+	/** @height: Height of the frame-buffer. */
+	__u32 height;
+	/**
+	 * @pixel_format: FourCC format code, see ``DRM_FORMAT_*`` constants in
+	 * ``drm_fourcc.h``.
+	 */
+	__u32 pixel_format;
+	/**
+	 * @flags: Frame-buffer flags (see &DRM_MODE_FB_INTERLACED and
+	 * &DRM_MODE_FB_MODIFIERS).
+	 */
+	__u32 flags;
+
+	/**
+	 * @handles: GEM buffer handle, one per plane. Set to 0 if the plane is
+	 * unused. The same handle can be used for multiple planes.
+	 */
+	__u32 handles[4];
+	/** @pitches: Pitch (aka. stride) in bytes, one per plane. */
+	__u32 pitches[4];
+	/** @offsets: Offset into the buffer in bytes, one per plane. */
+	__u32 offsets[4];
+	/**
+	 * @modifier: Format modifier, one per plane. See ``DRM_FORMAT_MOD_*``
+	 * constants in ``drm_fourcc.h``. All planes must use the same
+	 * modifier. Ignored unless &DRM_MODE_FB_MODIFIERS is set in @flags.
+	 */
+	__u64 modifier[4];
+};
+
+#define DRM_MODE_FB_DIRTY_ANNOTATE_COPY 0x01
+#define DRM_MODE_FB_DIRTY_ANNOTATE_FILL 0x02
+#define DRM_MODE_FB_DIRTY_FLAGS         0x03
+
+#define DRM_MODE_FB_DIRTY_MAX_CLIPS     256
+
+/*
+ * Mark a region of a framebuffer as dirty.
+ *
+ * Some hardware does not automatically update display contents
+ * as a hardware or software draw to a framebuffer. This ioctl
+ * allows userspace to tell the kernel and the hardware what
+ * regions of the framebuffer have changed.
+ *
+ * The kernel or hardware is free to update more then just the
+ * region specified by the clip rects. The kernel or hardware
+ * may also delay and/or coalesce several calls to dirty into a
+ * single update.
+ *
+ * Userspace may annotate the updates, the annotates are a
+ * promise made by the caller that the change is either a copy
+ * of pixels or a fill of a single color in the region specified.
+ *
+ * If the DRM_MODE_FB_DIRTY_ANNOTATE_COPY flag is given then
+ * the number of updated regions are half of num_clips given,
+ * where the clip rects are paired in src and dst. The width and
+ * height of each one of the pairs must match.
+ *
+ * If the DRM_MODE_FB_DIRTY_ANNOTATE_FILL flag is given the caller
+ * promises that the region specified of the clip rects is filled
+ * completely with a single color as given in the color argument.
+ */
+
+struct drm_mode_fb_dirty_cmd {
+	__u32 fb_id;
+	__u32 flags;
+	__u32 color;
+	__u32 num_clips;
+	__u64 clips_ptr;
+};
+
+struct drm_mode_mode_cmd {
+	__u32 connector_id;
+	struct drm_mode_modeinfo mode;
+};
+
+#define DRM_MODE_CURSOR_BO	0x01
+#define DRM_MODE_CURSOR_MOVE	0x02
+#define DRM_MODE_CURSOR_FLAGS	0x03
+
+/*
+ * depending on the value in flags different members are used.
+ *
+ * CURSOR_BO uses
+ *    crtc_id
+ *    width
+ *    height
+ *    handle - if 0 turns the cursor off
+ *
+ * CURSOR_MOVE uses
+ *    crtc_id
+ *    x
+ *    y
+ */
+struct drm_mode_cursor {
+	__u32 flags;
+	__u32 crtc_id;
+	__s32 x;
+	__s32 y;
+	__u32 width;
+	__u32 height;
+	/* driver specific handle */
+	__u32 handle;
+};
+
+struct drm_mode_cursor2 {
+	__u32 flags;
+	__u32 crtc_id;
+	__s32 x;
+	__s32 y;
+	__u32 width;
+	__u32 height;
+	/* driver specific handle */
+	__u32 handle;
+	__s32 hot_x;
+	__s32 hot_y;
+};
+
+struct drm_mode_crtc_lut {
+	__u32 crtc_id;
+	__u32 gamma_size;
+
+	/* pointers to arrays */
+	__u64 red;
+	__u64 green;
+	__u64 blue;
+};
+
+struct drm_color_ctm {
+	/*
+	 * Conversion matrix in S31.32 sign-magnitude
+	 * (not two's complement!) format.
+	 *
+	 * out   matrix    in
+	 * |R|   |0 1 2|   |R|
+	 * |G| = |3 4 5| x |G|
+	 * |B|   |6 7 8|   |B|
+	 */
+	__u64 matrix[9];
+};
+
+struct drm_color_lut {
+	/*
+	 * Values are mapped linearly to 0.0 - 1.0 range, with 0x0 == 0.0 and
+	 * 0xffff == 1.0.
+	 */
+	__u16 red;
+	__u16 green;
+	__u16 blue;
+	__u16 reserved;
+};
+
+/**
+ * struct hdr_metadata_infoframe - HDR Metadata Infoframe Data.
+ *
+ * HDR Metadata Infoframe as per CTA 861.G spec. This is expected
+ * to match exactly with the spec.
+ *
+ * Userspace is expected to pass the metadata information as per
+ * the format described in this structure.
+ */
+struct hdr_metadata_infoframe {
+	/**
+	 * @eotf: Electro-Optical Transfer Function (EOTF)
+	 * used in the stream.
+	 */
+	__u8 eotf;
+	/**
+	 * @metadata_type: Static_Metadata_Descriptor_ID.
+	 */
+	__u8 metadata_type;
+	/**
+	 * @display_primaries: Color Primaries of the Data.
+	 * These are coded as unsigned 16-bit values in units of
+	 * 0.00002, where 0x0000 represents zero and 0xC350
+	 * represents 1.0000.
+	 * @display_primaries.x: X cordinate of color primary.
+	 * @display_primaries.y: Y cordinate of color primary.
+	 */
+	struct {
+		__u16 x, y;
+	} display_primaries[3];
+	/**
+	 * @white_point: White Point of Colorspace Data.
+	 * These are coded as unsigned 16-bit values in units of
+	 * 0.00002, where 0x0000 represents zero and 0xC350
+	 * represents 1.0000.
+	 * @white_point.x: X cordinate of whitepoint of color primary.
+	 * @white_point.y: Y cordinate of whitepoint of color primary.
+	 */
+	struct {
+		__u16 x, y;
+	} white_point;
+	/**
+	 * @max_display_mastering_luminance: Max Mastering Display Luminance.
+	 * This value is coded as an unsigned 16-bit value in units of 1 cd/m2,
+	 * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2.
+	 */
+	__u16 max_display_mastering_luminance;
+	/**
+	 * @min_display_mastering_luminance: Min Mastering Display Luminance.
+	 * This value is coded as an unsigned 16-bit value in units of
+	 * 0.0001 cd/m2, where 0x0001 represents 0.0001 cd/m2 and 0xFFFF
+	 * represents 6.5535 cd/m2.
+	 */
+	__u16 min_display_mastering_luminance;
+	/**
+	 * @max_cll: Max Content Light Level.
+	 * This value is coded as an unsigned 16-bit value in units of 1 cd/m2,
+	 * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2.
+	 */
+	__u16 max_cll;
+	/**
+	 * @max_fall: Max Frame Average Light Level.
+	 * This value is coded as an unsigned 16-bit value in units of 1 cd/m2,
+	 * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2.
+	 */
+	__u16 max_fall;
+};
+
+/**
+ * struct hdr_output_metadata - HDR output metadata
+ *
+ * Metadata Information to be passed from userspace
+ */
+struct hdr_output_metadata {
+	/**
+	 * @metadata_type: Static_Metadata_Descriptor_ID.
+	 */
+	__u32 metadata_type;
+	/**
+	 * @hdmi_metadata_type1: HDR Metadata Infoframe.
+	 */
+	union {
+		struct hdr_metadata_infoframe hdmi_metadata_type1;
+	};
+};
+
+/**
+ * DRM_MODE_PAGE_FLIP_EVENT
+ *
+ * Request that the kernel sends back a vblank event (see
+ * struct drm_event_vblank) with the &DRM_EVENT_FLIP_COMPLETE type when the
+ * page-flip is done.
+ */
+#define DRM_MODE_PAGE_FLIP_EVENT 0x01
+/**
+ * DRM_MODE_PAGE_FLIP_ASYNC
+ *
+ * Request that the page-flip is performed as soon as possible, ie. with no
+ * delay due to waiting for vblank. This may cause tearing to be visible on
+ * the screen.
+ *
+ * When used with atomic uAPI, the driver will return an error if the hardware
+ * doesn't support performing an asynchronous page-flip for this update.
+ * User-space should handle this, e.g. by falling back to a regular page-flip.
+ *
+ * Note, some hardware might need to perform one last synchronous page-flip
+ * before being able to switch to asynchronous page-flips. As an exception,
+ * the driver will return success even though that first page-flip is not
+ * asynchronous.
+ */
+#define DRM_MODE_PAGE_FLIP_ASYNC 0x02
+#define DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE 0x4
+#define DRM_MODE_PAGE_FLIP_TARGET_RELATIVE 0x8
+#define DRM_MODE_PAGE_FLIP_TARGET (DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE | \
+				   DRM_MODE_PAGE_FLIP_TARGET_RELATIVE)
+/**
+ * DRM_MODE_PAGE_FLIP_FLAGS
+ *
+ * Bitmask of flags suitable for &drm_mode_crtc_page_flip_target.flags.
+ */
+#define DRM_MODE_PAGE_FLIP_FLAGS (DRM_MODE_PAGE_FLIP_EVENT | \
+				  DRM_MODE_PAGE_FLIP_ASYNC | \
+				  DRM_MODE_PAGE_FLIP_TARGET)
+
+/*
+ * Request a page flip on the specified crtc.
+ *
+ * This ioctl will ask KMS to schedule a page flip for the specified
+ * crtc.  Once any pending rendering targeting the specified fb (as of
+ * ioctl time) has completed, the crtc will be reprogrammed to display
+ * that fb after the next vertical refresh.  The ioctl returns
+ * immediately, but subsequent rendering to the current fb will block
+ * in the execbuffer ioctl until the page flip happens.  If a page
+ * flip is already pending as the ioctl is called, EBUSY will be
+ * returned.
+ *
+ * Flag DRM_MODE_PAGE_FLIP_EVENT requests that drm sends back a vblank
+ * event (see drm.h: struct drm_event_vblank) when the page flip is
+ * done.  The user_data field passed in with this ioctl will be
+ * returned as the user_data field in the vblank event struct.
+ *
+ * Flag DRM_MODE_PAGE_FLIP_ASYNC requests that the flip happen
+ * 'as soon as possible', meaning that it not delay waiting for vblank.
+ * This may cause tearing on the screen.
+ *
+ * The reserved field must be zero.
+ */
+
+struct drm_mode_crtc_page_flip {
+	__u32 crtc_id;
+	__u32 fb_id;
+	__u32 flags;
+	__u32 reserved;
+	__u64 user_data;
+};
+
+/*
+ * Request a page flip on the specified crtc.
+ *
+ * Same as struct drm_mode_crtc_page_flip, but supports new flags and
+ * re-purposes the reserved field:
+ *
+ * The sequence field must be zero unless either of the
+ * DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags is specified. When
+ * the ABSOLUTE flag is specified, the sequence field denotes the absolute
+ * vblank sequence when the flip should take effect. When the RELATIVE
+ * flag is specified, the sequence field denotes the relative (to the
+ * current one when the ioctl is called) vblank sequence when the flip
+ * should take effect. NOTE: DRM_IOCTL_WAIT_VBLANK must still be used to
+ * make sure the vblank sequence before the target one has passed before
+ * calling this ioctl. The purpose of the
+ * DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags is merely to clarify
+ * the target for when code dealing with a page flip runs during a
+ * vertical blank period.
+ */
+
+struct drm_mode_crtc_page_flip_target {
+	__u32 crtc_id;
+	__u32 fb_id;
+	__u32 flags;
+	__u32 sequence;
+	__u64 user_data;
+};
+
+/**
+ * struct drm_mode_create_dumb - Create a KMS dumb buffer for scanout.
+ * @height: buffer height in pixels
+ * @width: buffer width in pixels
+ * @bpp: bits per pixel
+ * @flags: must be zero
+ * @handle: buffer object handle
+ * @pitch: number of bytes between two consecutive lines
+ * @size: size of the whole buffer in bytes
+ *
+ * User-space fills @height, @width, @bpp and @flags. If the IOCTL succeeds,
+ * the kernel fills @handle, @pitch and @size.
+ */
+struct drm_mode_create_dumb {
+	__u32 height;
+	__u32 width;
+	__u32 bpp;
+	__u32 flags;
+
+	__u32 handle;
+	__u32 pitch;
+	__u64 size;
+};
+
+/* set up for mmap of a dumb scanout buffer */
+struct drm_mode_map_dumb {
+	/** Handle for the object being mapped. */
+	__u32 handle;
+	__u32 pad;
+	/**
+	 * Fake offset to use for subsequent mmap call
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 offset;
+};
+
+struct drm_mode_destroy_dumb {
+	__u32 handle;
+};
+
+/**
+ * DRM_MODE_ATOMIC_TEST_ONLY
+ *
+ * Do not apply the atomic commit, instead check whether the hardware supports
+ * this configuration.
+ *
+ * See &drm_mode_config_funcs.atomic_check for more details on test-only
+ * commits.
+ */
+#define DRM_MODE_ATOMIC_TEST_ONLY 0x0100
+/**
+ * DRM_MODE_ATOMIC_NONBLOCK
+ *
+ * Do not block while applying the atomic commit. The &DRM_IOCTL_MODE_ATOMIC
+ * IOCTL returns immediately instead of waiting for the changes to be applied
+ * in hardware. Note, the driver will still check that the update can be
+ * applied before retuning.
+ */
+#define DRM_MODE_ATOMIC_NONBLOCK  0x0200
+/**
+ * DRM_MODE_ATOMIC_ALLOW_MODESET
+ *
+ * Allow the update to result in temporary or transient visible artifacts while
+ * the update is being applied. Applying the update may also take significantly
+ * more time than a page flip. All visual artifacts will disappear by the time
+ * the update is completed, as signalled through the vblank event's timestamp
+ * (see struct drm_event_vblank).
+ *
+ * This flag must be set when the KMS update might cause visible artifacts.
+ * Without this flag such KMS update will return a EINVAL error. What kind of
+ * update may cause visible artifacts depends on the driver and the hardware.
+ * User-space that needs to know beforehand if an update might cause visible
+ * artifacts can use &DRM_MODE_ATOMIC_TEST_ONLY without
+ * &DRM_MODE_ATOMIC_ALLOW_MODESET to see if it fails.
+ *
+ * To the best of the driver's knowledge, visual artifacts are guaranteed to
+ * not appear when this flag is not set. Some sinks might display visual
+ * artifacts outside of the driver's control.
+ */
+#define DRM_MODE_ATOMIC_ALLOW_MODESET 0x0400
+
+/**
+ * DRM_MODE_ATOMIC_FLAGS
+ *
+ * Bitfield of flags accepted by the &DRM_IOCTL_MODE_ATOMIC IOCTL in
+ * &drm_mode_atomic.flags.
+ */
+#define DRM_MODE_ATOMIC_FLAGS (\
+		DRM_MODE_PAGE_FLIP_EVENT |\
+		DRM_MODE_PAGE_FLIP_ASYNC |\
+		DRM_MODE_ATOMIC_TEST_ONLY |\
+		DRM_MODE_ATOMIC_NONBLOCK |\
+		DRM_MODE_ATOMIC_ALLOW_MODESET)
+
+struct drm_mode_atomic {
+	__u32 flags;
+	__u32 count_objs;
+	__u64 objs_ptr;
+	__u64 count_props_ptr;
+	__u64 props_ptr;
+	__u64 prop_values_ptr;
+	__u64 reserved;
+	__u64 user_data;
+};
+
+struct drm_format_modifier_blob {
+#define FORMAT_BLOB_CURRENT 1
+	/* Version of this blob format */
+	__u32 version;
+
+	/* Flags */
+	__u32 flags;
+
+	/* Number of fourcc formats supported */
+	__u32 count_formats;
+
+	/* Where in this blob the formats exist (in bytes) */
+	__u32 formats_offset;
+
+	/* Number of drm_format_modifiers */
+	__u32 count_modifiers;
+
+	/* Where in this blob the modifiers exist (in bytes) */
+	__u32 modifiers_offset;
+
+	/* __u32 formats[] */
+	/* struct drm_format_modifier modifiers[] */
+};
+
+struct drm_format_modifier {
+	/* Bitmask of formats in get_plane format list this info applies to. The
+	 * offset allows a sliding window of which 64 formats (bits).
+	 *
+	 * Some examples:
+	 * In today's world with < 65 formats, and formats 0, and 2 are
+	 * supported
+	 * 0x0000000000000005
+	 *		  ^-offset = 0, formats = 5
+	 *
+	 * If the number formats grew to 128, and formats 98-102 are
+	 * supported with the modifier:
+	 *
+	 * 0x0000007c00000000 0000000000000000
+	 *		  ^
+	 *		  |__offset = 64, formats = 0x7c00000000
+	 *
+	 */
+	__u64 formats;
+	__u32 offset;
+	__u32 pad;
+
+	/* The modifier that applies to the >get_plane format list bitmask. */
+	__u64 modifier;
+};
+
+/**
+ * struct drm_mode_create_blob - Create New blob property
+ *
+ * Create a new 'blob' data property, copying length bytes from data pointer,
+ * and returning new blob ID.
+ */
+struct drm_mode_create_blob {
+	/** @data: Pointer to data to copy. */
+	__u64 data;
+	/** @length: Length of data to copy. */
+	__u32 length;
+	/** @blob_id: Return: new property ID. */
+	__u32 blob_id;
+};
+
+/**
+ * struct drm_mode_destroy_blob - Destroy user blob
+ * @blob_id: blob_id to destroy
+ *
+ * Destroy a user-created blob property.
+ *
+ * User-space can release blobs as soon as they do not need to refer to them by
+ * their blob object ID.  For instance, if you are using a MODE_ID blob in an
+ * atomic commit and you will not make another commit re-using the same ID, you
+ * can destroy the blob as soon as the commit has been issued, without waiting
+ * for it to complete.
+ */
+struct drm_mode_destroy_blob {
+	__u32 blob_id;
+};
+
+/**
+ * struct drm_mode_create_lease - Create lease
+ *
+ * Lease mode resources, creating another drm_master.
+ *
+ * The @object_ids array must reference at least one CRTC, one connector and
+ * one plane if &DRM_CLIENT_CAP_UNIVERSAL_PLANES is enabled. Alternatively,
+ * the lease can be completely empty.
+ */
+struct drm_mode_create_lease {
+	/** @object_ids: Pointer to array of object ids (__u32) */
+	__u64 object_ids;
+	/** @object_count: Number of object ids */
+	__u32 object_count;
+	/** @flags: flags for new FD (O_CLOEXEC, etc) */
+	__u32 flags;
+
+	/** @lessee_id: Return: unique identifier for lessee. */
+	__u32 lessee_id;
+	/** @fd: Return: file descriptor to new drm_master file */
+	__u32 fd;
+};
+
+/**
+ * struct drm_mode_list_lessees - List lessees
+ *
+ * List lesses from a drm_master.
+ */
+struct drm_mode_list_lessees {
+	/**
+	 * @count_lessees: Number of lessees.
+	 *
+	 * On input, provides length of the array.
+	 * On output, provides total number. No
+	 * more than the input number will be written
+	 * back, so two calls can be used to get
+	 * the size and then the data.
+	 */
+	__u32 count_lessees;
+	/** @pad: Padding. */
+	__u32 pad;
+
+	/**
+	 * @lessees_ptr: Pointer to lessees.
+	 *
+	 * Pointer to __u64 array of lessee ids
+	 */
+	__u64 lessees_ptr;
+};
+
+/**
+ * struct drm_mode_get_lease - Get Lease
+ *
+ * Get leased objects.
+ */
+struct drm_mode_get_lease {
+	/**
+	 * @count_objects: Number of leased objects.
+	 *
+	 * On input, provides length of the array.
+	 * On output, provides total number. No
+	 * more than the input number will be written
+	 * back, so two calls can be used to get
+	 * the size and then the data.
+	 */
+	__u32 count_objects;
+	/** @pad: Padding. */
+	__u32 pad;
+
+	/**
+	 * @objects_ptr: Pointer to objects.
+	 *
+	 * Pointer to __u32 array of object ids.
+	 */
+	__u64 objects_ptr;
+};
+
+/**
+ * struct drm_mode_revoke_lease - Revoke lease
+ */
+struct drm_mode_revoke_lease {
+	/** @lessee_id: Unique ID of lessee */
+	__u32 lessee_id;
+};
+
+/**
+ * struct drm_mode_rect - Two dimensional rectangle.
+ * @x1: Horizontal starting coordinate (inclusive).
+ * @y1: Vertical starting coordinate (inclusive).
+ * @x2: Horizontal ending coordinate (exclusive).
+ * @y2: Vertical ending coordinate (exclusive).
+ *
+ * With drm subsystem using struct drm_rect to manage rectangular area this
+ * export it to user-space.
+ *
+ * Currently used by drm_mode_atomic blob property FB_DAMAGE_CLIPS.
+ */
+struct drm_mode_rect {
+	__s32 x1;
+	__s32 y1;
+	__s32 x2;
+	__s32 y2;
+};
+
+/**
+ * struct drm_mode_closefb
+ * @fb_id: Framebuffer ID.
+ * @pad: Must be zero.
+ */
+struct drm_mode_closefb {
+	__u32 fb_id;
+	__u32 pad;
+};
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
diff --git a/include/drm/drm_sarea.h b/include/drm/drm_sarea.h
new file mode 100644
index 0000000..93025be
--- /dev/null
+++ b/include/drm/drm_sarea.h
@@ -0,0 +1,92 @@
+/**
+ * \file drm_sarea.h
+ * \brief SAREA definitions
+ *
+ * \author Michel Dänzer <michel@daenzer.net>
+ */
+
+/*
+ * Copyright 2002 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_SAREA_H_
+#define _DRM_SAREA_H_
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* SAREA area needs to be at least a page */
+#if defined(__alpha__)
+#define SAREA_MAX                       0x2000U
+#elif defined(__mips__)
+#define SAREA_MAX                       0x4000U
+#elif defined(__ia64__)
+#define SAREA_MAX                       0x10000U	/* 64kB */
+#else
+/* Intel 830M driver needs at least 8k SAREA */
+#define SAREA_MAX                       0x2000U
+#endif
+
+/** Maximum number of drawables in the SAREA */
+#define SAREA_MAX_DRAWABLES		256
+
+#define SAREA_DRAWABLE_CLAIMED_ENTRY    0x80000000
+
+/** SAREA drawable */
+struct drm_sarea_drawable {
+	unsigned int stamp;
+	unsigned int flags;
+};
+
+/** SAREA frame */
+struct drm_sarea_frame {
+	unsigned int x;
+	unsigned int y;
+	unsigned int width;
+	unsigned int height;
+	unsigned int fullscreen;
+};
+
+/** SAREA */
+struct drm_sarea {
+    /** first thing is always the DRM locking structure */
+	struct drm_hw_lock lock;
+    /** \todo Use readers/writer lock for drm_sarea::drawable_lock */
+	struct drm_hw_lock drawable_lock;
+	struct drm_sarea_drawable drawableTable[SAREA_MAX_DRAWABLES];	/**< drawables */
+	struct drm_sarea_frame frame;	/**< frame */
+	drm_context_t dummy_context;
+};
+
+typedef struct drm_sarea_drawable drm_sarea_drawable_t;
+typedef struct drm_sarea_frame drm_sarea_frame_t;
+typedef struct drm_sarea drm_sarea_t;
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif				/* _DRM_SAREA_H_ */
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
new file mode 100644
index 0000000..1de0433
--- /dev/null
+++ b/include/drm/i915_drm.h
@@ -0,0 +1,3724 @@
+/*
+ * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _I915_DRM_H_
+#define _I915_DRM_H_
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* Please note that modifications to all structs defined here are
+ * subject to backwards-compatibility constraints.
+ */
+
+/**
+ * DOC: uevents generated by i915 on it's device node
+ *
+ * I915_L3_PARITY_UEVENT - Generated when the driver receives a parity mismatch
+ *	event from the gpu l3 cache. Additional information supplied is ROW,
+ *	BANK, SUBBANK, SLICE of the affected cacheline. Userspace should keep
+ *	track of these events and if a specific cache-line seems to have a
+ *	persistent error remap it with the l3 remapping tool supplied in
+ *	intel-gpu-tools.  The value supplied with the event is always 1.
+ *
+ * I915_ERROR_UEVENT - Generated upon error detection, currently only via
+ *	hangcheck. The error detection event is a good indicator of when things
+ *	began to go badly. The value supplied with the event is a 1 upon error
+ *	detection, and a 0 upon reset completion, signifying no more error
+ *	exists. NOTE: Disabling hangcheck or reset via module parameter will
+ *	cause the related events to not be seen.
+ *
+ * I915_RESET_UEVENT - Event is generated just before an attempt to reset the
+ *	GPU. The value supplied with the event is always 1. NOTE: Disable
+ *	reset via module parameter will cause this event to not be seen.
+ */
+#define I915_L3_PARITY_UEVENT		"L3_PARITY_ERROR"
+#define I915_ERROR_UEVENT		"ERROR"
+#define I915_RESET_UEVENT		"RESET"
+
+/**
+ * struct i915_user_extension - Base class for defining a chain of extensions
+ *
+ * Many interfaces need to grow over time. In most cases we can simply
+ * extend the struct and have userspace pass in more data. Another option,
+ * as demonstrated by Vulkan's approach to providing extensions for forward
+ * and backward compatibility, is to use a list of optional structs to
+ * provide those extra details.
+ *
+ * The key advantage to using an extension chain is that it allows us to
+ * redefine the interface more easily than an ever growing struct of
+ * increasing complexity, and for large parts of that interface to be
+ * entirely optional. The downside is more pointer chasing; chasing across
+ * the boundary with pointers encapsulated inside u64.
+ *
+ * Example chaining:
+ *
+ * .. code-block:: C
+ *
+ *	struct i915_user_extension ext3 {
+ *		.next_extension = 0, // end
+ *		.name = ...,
+ *	};
+ *	struct i915_user_extension ext2 {
+ *		.next_extension = (uintptr_t)&ext3,
+ *		.name = ...,
+ *	};
+ *	struct i915_user_extension ext1 {
+ *		.next_extension = (uintptr_t)&ext2,
+ *		.name = ...,
+ *	};
+ *
+ * Typically the struct i915_user_extension would be embedded in some uAPI
+ * struct, and in this case we would feed it the head of the chain(i.e ext1),
+ * which would then apply all of the above extensions.
+ *
+ */
+struct i915_user_extension {
+	/**
+	 * @next_extension:
+	 *
+	 * Pointer to the next struct i915_user_extension, or zero if the end.
+	 */
+	__u64 next_extension;
+	/**
+	 * @name: Name of the extension.
+	 *
+	 * Note that the name here is just some integer.
+	 *
+	 * Also note that the name space for this is not global for the whole
+	 * driver, but rather its scope/meaning is limited to the specific piece
+	 * of uAPI which has embedded the struct i915_user_extension.
+	 */
+	__u32 name;
+	/**
+	 * @flags: MBZ
+	 *
+	 * All undefined bits must be zero.
+	 */
+	__u32 flags;
+	/**
+	 * @rsvd: MBZ
+	 *
+	 * Reserved for future use; must be zero.
+	 */
+	__u32 rsvd[4];
+};
+
+/*
+ * MOCS indexes used for GPU surfaces, defining the cacheability of the
+ * surface data and the coherency for this data wrt. CPU vs. GPU accesses.
+ */
+enum i915_mocs_table_index {
+	/*
+	 * Not cached anywhere, coherency between CPU and GPU accesses is
+	 * guaranteed.
+	 */
+	I915_MOCS_UNCACHED,
+	/*
+	 * Cacheability and coherency controlled by the kernel automatically
+	 * based on the DRM_I915_GEM_SET_CACHING IOCTL setting and the current
+	 * usage of the surface (used for display scanout or not).
+	 */
+	I915_MOCS_PTE,
+	/*
+	 * Cached in all GPU caches available on the platform.
+	 * Coherency between CPU and GPU accesses to the surface is not
+	 * guaranteed without extra synchronization.
+	 */
+	I915_MOCS_CACHED,
+};
+
+/**
+ * enum drm_i915_gem_engine_class - uapi engine type enumeration
+ *
+ * Different engines serve different roles, and there may be more than one
+ * engine serving each role.  This enum provides a classification of the role
+ * of the engine, which may be used when requesting operations to be performed
+ * on a certain subset of engines, or for providing information about that
+ * group.
+ */
+enum drm_i915_gem_engine_class {
+	/**
+	 * @I915_ENGINE_CLASS_RENDER:
+	 *
+	 * Render engines support instructions used for 3D, Compute (GPGPU),
+	 * and programmable media workloads.  These instructions fetch data and
+	 * dispatch individual work items to threads that operate in parallel.
+	 * The threads run small programs (called "kernels" or "shaders") on
+	 * the GPU's execution units (EUs).
+	 */
+	I915_ENGINE_CLASS_RENDER	= 0,
+
+	/**
+	 * @I915_ENGINE_CLASS_COPY:
+	 *
+	 * Copy engines (also referred to as "blitters") support instructions
+	 * that move blocks of data from one location in memory to another,
+	 * or that fill a specified location of memory with fixed data.
+	 * Copy engines can perform pre-defined logical or bitwise operations
+	 * on the source, destination, or pattern data.
+	 */
+	I915_ENGINE_CLASS_COPY		= 1,
+
+	/**
+	 * @I915_ENGINE_CLASS_VIDEO:
+	 *
+	 * Video engines (also referred to as "bit stream decode" (BSD) or
+	 * "vdbox") support instructions that perform fixed-function media
+	 * decode and encode.
+	 */
+	I915_ENGINE_CLASS_VIDEO		= 2,
+
+	/**
+	 * @I915_ENGINE_CLASS_VIDEO_ENHANCE:
+	 *
+	 * Video enhancement engines (also referred to as "vebox") support
+	 * instructions related to image enhancement.
+	 */
+	I915_ENGINE_CLASS_VIDEO_ENHANCE	= 3,
+
+	/**
+	 * @I915_ENGINE_CLASS_COMPUTE:
+	 *
+	 * Compute engines support a subset of the instructions available
+	 * on render engines:  compute engines support Compute (GPGPU) and
+	 * programmable media workloads, but do not support the 3D pipeline.
+	 */
+	I915_ENGINE_CLASS_COMPUTE	= 4,
+
+	/* Values in this enum should be kept compact. */
+
+	/**
+	 * @I915_ENGINE_CLASS_INVALID:
+	 *
+	 * Placeholder value to represent an invalid engine class assignment.
+	 */
+	I915_ENGINE_CLASS_INVALID	= -1
+};
+
+/**
+ * struct i915_engine_class_instance - Engine class/instance identifier
+ *
+ * There may be more than one engine fulfilling any role within the system.
+ * Each engine of a class is given a unique instance number and therefore
+ * any engine can be specified by its class:instance tuplet. APIs that allow
+ * access to any engine in the system will use struct i915_engine_class_instance
+ * for this identification.
+ */
+struct i915_engine_class_instance {
+	/**
+	 * @engine_class:
+	 *
+	 * Engine class from enum drm_i915_gem_engine_class
+	 */
+	__u16 engine_class;
+#define I915_ENGINE_CLASS_INVALID_NONE -1
+#define I915_ENGINE_CLASS_INVALID_VIRTUAL -2
+
+	/**
+	 * @engine_instance:
+	 *
+	 * Engine instance.
+	 */
+	__u16 engine_instance;
+};
+
+/**
+ * DOC: perf_events exposed by i915 through /sys/bus/event_sources/drivers/i915
+ *
+ */
+
+enum drm_i915_pmu_engine_sample {
+	I915_SAMPLE_BUSY = 0,
+	I915_SAMPLE_WAIT = 1,
+	I915_SAMPLE_SEMA = 2
+};
+
+#define I915_PMU_SAMPLE_BITS (4)
+#define I915_PMU_SAMPLE_MASK (0xf)
+#define I915_PMU_SAMPLE_INSTANCE_BITS (8)
+#define I915_PMU_CLASS_SHIFT \
+	(I915_PMU_SAMPLE_BITS + I915_PMU_SAMPLE_INSTANCE_BITS)
+
+#define __I915_PMU_ENGINE(class, instance, sample) \
+	((class) << I915_PMU_CLASS_SHIFT | \
+	(instance) << I915_PMU_SAMPLE_BITS | \
+	(sample))
+
+#define I915_PMU_ENGINE_BUSY(class, instance) \
+	__I915_PMU_ENGINE(class, instance, I915_SAMPLE_BUSY)
+
+#define I915_PMU_ENGINE_WAIT(class, instance) \
+	__I915_PMU_ENGINE(class, instance, I915_SAMPLE_WAIT)
+
+#define I915_PMU_ENGINE_SEMA(class, instance) \
+	__I915_PMU_ENGINE(class, instance, I915_SAMPLE_SEMA)
+
+#define __I915_PMU_OTHER(x) (__I915_PMU_ENGINE(0xff, 0xff, 0xf) + 1 + (x))
+
+#define I915_PMU_ACTUAL_FREQUENCY	__I915_PMU_OTHER(0)
+#define I915_PMU_REQUESTED_FREQUENCY	__I915_PMU_OTHER(1)
+#define I915_PMU_INTERRUPTS		__I915_PMU_OTHER(2)
+#define I915_PMU_RC6_RESIDENCY		__I915_PMU_OTHER(3)
+#define I915_PMU_SOFTWARE_GT_AWAKE_TIME	__I915_PMU_OTHER(4)
+
+#define I915_PMU_LAST /* Deprecated - do not use */ I915_PMU_RC6_RESIDENCY
+
+/* Each region is a minimum of 16k, and there are at most 255 of them.
+ */
+#define I915_NR_TEX_REGIONS 255	/* table size 2k - maximum due to use
+				 * of chars for next/prev indices */
+#define I915_LOG_MIN_TEX_REGION_SIZE 14
+
+typedef struct _drm_i915_init {
+	enum {
+		I915_INIT_DMA = 0x01,
+		I915_CLEANUP_DMA = 0x02,
+		I915_RESUME_DMA = 0x03
+	} func;
+	unsigned int mmio_offset;
+	int sarea_priv_offset;
+	unsigned int ring_start;
+	unsigned int ring_end;
+	unsigned int ring_size;
+	unsigned int front_offset;
+	unsigned int back_offset;
+	unsigned int depth_offset;
+	unsigned int w;
+	unsigned int h;
+	unsigned int pitch;
+	unsigned int pitch_bits;
+	unsigned int back_pitch;
+	unsigned int depth_pitch;
+	unsigned int cpp;
+	unsigned int chipset;
+} drm_i915_init_t;
+
+typedef struct _drm_i915_sarea {
+	struct drm_tex_region texList[I915_NR_TEX_REGIONS + 1];
+	int last_upload;	/* last time texture was uploaded */
+	int last_enqueue;	/* last time a buffer was enqueued */
+	int last_dispatch;	/* age of the most recently dispatched buffer */
+	int ctxOwner;		/* last context to upload state */
+	int texAge;
+	int pf_enabled;		/* is pageflipping allowed? */
+	int pf_active;
+	int pf_current_page;	/* which buffer is being displayed? */
+	int perf_boxes;		/* performance boxes to be displayed */
+	int width, height;      /* screen size in pixels */
+
+	drm_handle_t front_handle;
+	int front_offset;
+	int front_size;
+
+	drm_handle_t back_handle;
+	int back_offset;
+	int back_size;
+
+	drm_handle_t depth_handle;
+	int depth_offset;
+	int depth_size;
+
+	drm_handle_t tex_handle;
+	int tex_offset;
+	int tex_size;
+	int log_tex_granularity;
+	int pitch;
+	int rotation;           /* 0, 90, 180 or 270 */
+	int rotated_offset;
+	int rotated_size;
+	int rotated_pitch;
+	int virtualX, virtualY;
+
+	unsigned int front_tiled;
+	unsigned int back_tiled;
+	unsigned int depth_tiled;
+	unsigned int rotated_tiled;
+	unsigned int rotated2_tiled;
+
+	int pipeA_x;
+	int pipeA_y;
+	int pipeA_w;
+	int pipeA_h;
+	int pipeB_x;
+	int pipeB_y;
+	int pipeB_w;
+	int pipeB_h;
+
+	/* fill out some space for old userspace triple buffer */
+	drm_handle_t unused_handle;
+	__u32 unused1, unused2, unused3;
+
+	/* buffer object handles for static buffers. May change
+	 * over the lifetime of the client.
+	 */
+	__u32 front_bo_handle;
+	__u32 back_bo_handle;
+	__u32 unused_bo_handle;
+	__u32 depth_bo_handle;
+
+} drm_i915_sarea_t;
+
+/* due to userspace building against these headers we need some compat here */
+#define planeA_x pipeA_x
+#define planeA_y pipeA_y
+#define planeA_w pipeA_w
+#define planeA_h pipeA_h
+#define planeB_x pipeB_x
+#define planeB_y pipeB_y
+#define planeB_w pipeB_w
+#define planeB_h pipeB_h
+
+/* Flags for perf_boxes
+ */
+#define I915_BOX_RING_EMPTY    0x1
+#define I915_BOX_FLIP          0x2
+#define I915_BOX_WAIT          0x4
+#define I915_BOX_TEXTURE_LOAD  0x8
+#define I915_BOX_LOST_CONTEXT  0x10
+
+/*
+ * i915 specific ioctls.
+ *
+ * The device specific ioctl range is [DRM_COMMAND_BASE, DRM_COMMAND_END) ie
+ * [0x40, 0xa0) (a0 is excluded). The numbers below are defined as offset
+ * against DRM_COMMAND_BASE and should be between [0x0, 0x60).
+ */
+#define DRM_I915_INIT		0x00
+#define DRM_I915_FLUSH		0x01
+#define DRM_I915_FLIP		0x02
+#define DRM_I915_BATCHBUFFER	0x03
+#define DRM_I915_IRQ_EMIT	0x04
+#define DRM_I915_IRQ_WAIT	0x05
+#define DRM_I915_GETPARAM	0x06
+#define DRM_I915_SETPARAM	0x07
+#define DRM_I915_ALLOC		0x08
+#define DRM_I915_FREE		0x09
+#define DRM_I915_INIT_HEAP	0x0a
+#define DRM_I915_CMDBUFFER	0x0b
+#define DRM_I915_DESTROY_HEAP	0x0c
+#define DRM_I915_SET_VBLANK_PIPE	0x0d
+#define DRM_I915_GET_VBLANK_PIPE	0x0e
+#define DRM_I915_VBLANK_SWAP	0x0f
+#define DRM_I915_HWS_ADDR	0x11
+#define DRM_I915_GEM_INIT	0x13
+#define DRM_I915_GEM_EXECBUFFER	0x14
+#define DRM_I915_GEM_PIN	0x15
+#define DRM_I915_GEM_UNPIN	0x16
+#define DRM_I915_GEM_BUSY	0x17
+#define DRM_I915_GEM_THROTTLE	0x18
+#define DRM_I915_GEM_ENTERVT	0x19
+#define DRM_I915_GEM_LEAVEVT	0x1a
+#define DRM_I915_GEM_CREATE	0x1b
+#define DRM_I915_GEM_PREAD	0x1c
+#define DRM_I915_GEM_PWRITE	0x1d
+#define DRM_I915_GEM_MMAP	0x1e
+#define DRM_I915_GEM_SET_DOMAIN	0x1f
+#define DRM_I915_GEM_SW_FINISH	0x20
+#define DRM_I915_GEM_SET_TILING	0x21
+#define DRM_I915_GEM_GET_TILING	0x22
+#define DRM_I915_GEM_GET_APERTURE 0x23
+#define DRM_I915_GEM_MMAP_GTT	0x24
+#define DRM_I915_GET_PIPE_FROM_CRTC_ID	0x25
+#define DRM_I915_GEM_MADVISE	0x26
+#define DRM_I915_OVERLAY_PUT_IMAGE	0x27
+#define DRM_I915_OVERLAY_ATTRS	0x28
+#define DRM_I915_GEM_EXECBUFFER2	0x29
+#define DRM_I915_GEM_EXECBUFFER2_WR	DRM_I915_GEM_EXECBUFFER2
+#define DRM_I915_GET_SPRITE_COLORKEY	0x2a
+#define DRM_I915_SET_SPRITE_COLORKEY	0x2b
+#define DRM_I915_GEM_WAIT	0x2c
+#define DRM_I915_GEM_CONTEXT_CREATE	0x2d
+#define DRM_I915_GEM_CONTEXT_DESTROY	0x2e
+#define DRM_I915_GEM_SET_CACHING	0x2f
+#define DRM_I915_GEM_GET_CACHING	0x30
+#define DRM_I915_REG_READ		0x31
+#define DRM_I915_GET_RESET_STATS	0x32
+#define DRM_I915_GEM_USERPTR		0x33
+#define DRM_I915_GEM_CONTEXT_GETPARAM	0x34
+#define DRM_I915_GEM_CONTEXT_SETPARAM	0x35
+#define DRM_I915_PERF_OPEN		0x36
+#define DRM_I915_PERF_ADD_CONFIG	0x37
+#define DRM_I915_PERF_REMOVE_CONFIG	0x38
+#define DRM_I915_QUERY			0x39
+#define DRM_I915_GEM_VM_CREATE		0x3a
+#define DRM_I915_GEM_VM_DESTROY		0x3b
+#define DRM_I915_GEM_CREATE_EXT		0x3c
+/* Must be kept compact -- no holes */
+
+#define DRM_IOCTL_I915_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
+#define DRM_IOCTL_I915_FLUSH		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
+#define DRM_IOCTL_I915_FLIP		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLIP)
+#define DRM_IOCTL_I915_BATCHBUFFER	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_BATCHBUFFER, drm_i915_batchbuffer_t)
+#define DRM_IOCTL_I915_IRQ_EMIT         DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_IRQ_EMIT, drm_i915_irq_emit_t)
+#define DRM_IOCTL_I915_IRQ_WAIT         DRM_IOW( DRM_COMMAND_BASE + DRM_I915_IRQ_WAIT, drm_i915_irq_wait_t)
+#define DRM_IOCTL_I915_GETPARAM         DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GETPARAM, drm_i915_getparam_t)
+#define DRM_IOCTL_I915_SETPARAM         DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SETPARAM, drm_i915_setparam_t)
+#define DRM_IOCTL_I915_ALLOC            DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_ALLOC, drm_i915_mem_alloc_t)
+#define DRM_IOCTL_I915_FREE             DRM_IOW( DRM_COMMAND_BASE + DRM_I915_FREE, drm_i915_mem_free_t)
+#define DRM_IOCTL_I915_INIT_HEAP        DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT_HEAP, drm_i915_mem_init_heap_t)
+#define DRM_IOCTL_I915_CMDBUFFER	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_CMDBUFFER, drm_i915_cmdbuffer_t)
+#define DRM_IOCTL_I915_DESTROY_HEAP	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_DESTROY_HEAP, drm_i915_mem_destroy_heap_t)
+#define DRM_IOCTL_I915_SET_VBLANK_PIPE	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
+#define DRM_IOCTL_I915_GET_VBLANK_PIPE	DRM_IOR( DRM_COMMAND_BASE + DRM_I915_GET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
+#define DRM_IOCTL_I915_VBLANK_SWAP	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t)
+#define DRM_IOCTL_I915_HWS_ADDR		DRM_IOW(DRM_COMMAND_BASE + DRM_I915_HWS_ADDR, struct drm_i915_gem_init)
+#define DRM_IOCTL_I915_GEM_INIT		DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER2	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2, struct drm_i915_gem_execbuffer2)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER2_WR	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2_WR, struct drm_i915_gem_execbuffer2)
+#define DRM_IOCTL_I915_GEM_PIN		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin)
+#define DRM_IOCTL_I915_GEM_UNPIN	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin)
+#define DRM_IOCTL_I915_GEM_BUSY		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy)
+#define DRM_IOCTL_I915_GEM_SET_CACHING		DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_SET_CACHING, struct drm_i915_gem_caching)
+#define DRM_IOCTL_I915_GEM_GET_CACHING		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_GET_CACHING, struct drm_i915_gem_caching)
+#define DRM_IOCTL_I915_GEM_THROTTLE	DRM_IO ( DRM_COMMAND_BASE + DRM_I915_GEM_THROTTLE)
+#define DRM_IOCTL_I915_GEM_ENTERVT	DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_ENTERVT)
+#define DRM_IOCTL_I915_GEM_LEAVEVT	DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_LEAVEVT)
+#define DRM_IOCTL_I915_GEM_CREATE	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_CREATE, struct drm_i915_gem_create)
+#define DRM_IOCTL_I915_GEM_CREATE_EXT	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_CREATE_EXT, struct drm_i915_gem_create_ext)
+#define DRM_IOCTL_I915_GEM_PREAD	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PREAD, struct drm_i915_gem_pread)
+#define DRM_IOCTL_I915_GEM_PWRITE	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PWRITE, struct drm_i915_gem_pwrite)
+#define DRM_IOCTL_I915_GEM_MMAP		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP, struct drm_i915_gem_mmap)
+#define DRM_IOCTL_I915_GEM_MMAP_GTT	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP_GTT, struct drm_i915_gem_mmap_gtt)
+#define DRM_IOCTL_I915_GEM_MMAP_OFFSET	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP_GTT, struct drm_i915_gem_mmap_offset)
+#define DRM_IOCTL_I915_GEM_SET_DOMAIN	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SET_DOMAIN, struct drm_i915_gem_set_domain)
+#define DRM_IOCTL_I915_GEM_SW_FINISH	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SW_FINISH, struct drm_i915_gem_sw_finish)
+#define DRM_IOCTL_I915_GEM_SET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling)
+#define DRM_IOCTL_I915_GEM_GET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling)
+#define DRM_IOCTL_I915_GEM_GET_APERTURE	DRM_IOR  (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
+#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_i915_get_pipe_from_crtc_id)
+#define DRM_IOCTL_I915_GEM_MADVISE	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MADVISE, struct drm_i915_gem_madvise)
+#define DRM_IOCTL_I915_OVERLAY_PUT_IMAGE	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_OVERLAY_PUT_IMAGE, struct drm_intel_overlay_put_image)
+#define DRM_IOCTL_I915_OVERLAY_ATTRS	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_OVERLAY_ATTRS, struct drm_intel_overlay_attrs)
+#define DRM_IOCTL_I915_SET_SPRITE_COLORKEY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_SET_SPRITE_COLORKEY, struct drm_intel_sprite_colorkey)
+#define DRM_IOCTL_I915_GET_SPRITE_COLORKEY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_SPRITE_COLORKEY, struct drm_intel_sprite_colorkey)
+#define DRM_IOCTL_I915_GEM_WAIT		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_WAIT, struct drm_i915_gem_wait)
+#define DRM_IOCTL_I915_GEM_CONTEXT_CREATE	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_CREATE, struct drm_i915_gem_context_create)
+#define DRM_IOCTL_I915_GEM_CONTEXT_CREATE_EXT	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_CREATE, struct drm_i915_gem_context_create_ext)
+#define DRM_IOCTL_I915_GEM_CONTEXT_DESTROY	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_DESTROY, struct drm_i915_gem_context_destroy)
+#define DRM_IOCTL_I915_REG_READ			DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_REG_READ, struct drm_i915_reg_read)
+#define DRM_IOCTL_I915_GET_RESET_STATS		DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GET_RESET_STATS, struct drm_i915_reset_stats)
+#define DRM_IOCTL_I915_GEM_USERPTR			DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_USERPTR, struct drm_i915_gem_userptr)
+#define DRM_IOCTL_I915_GEM_CONTEXT_GETPARAM	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_GETPARAM, struct drm_i915_gem_context_param)
+#define DRM_IOCTL_I915_GEM_CONTEXT_SETPARAM	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_SETPARAM, struct drm_i915_gem_context_param)
+#define DRM_IOCTL_I915_PERF_OPEN	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_OPEN, struct drm_i915_perf_open_param)
+#define DRM_IOCTL_I915_PERF_ADD_CONFIG	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_ADD_CONFIG, struct drm_i915_perf_oa_config)
+#define DRM_IOCTL_I915_PERF_REMOVE_CONFIG	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_REMOVE_CONFIG, __u64)
+#define DRM_IOCTL_I915_QUERY			DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_QUERY, struct drm_i915_query)
+#define DRM_IOCTL_I915_GEM_VM_CREATE	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_VM_CREATE, struct drm_i915_gem_vm_control)
+#define DRM_IOCTL_I915_GEM_VM_DESTROY	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_VM_DESTROY, struct drm_i915_gem_vm_control)
+
+/* Allow drivers to submit batchbuffers directly to hardware, relying
+ * on the security mechanisms provided by hardware.
+ */
+typedef struct drm_i915_batchbuffer {
+	int start;		/* agp offset */
+	int used;		/* nr bytes in use */
+	int DR1;		/* hw flags for GFX_OP_DRAWRECT_INFO */
+	int DR4;		/* window origin for GFX_OP_DRAWRECT_INFO */
+	int num_cliprects;	/* mulitpass with multiple cliprects? */
+	struct drm_clip_rect *cliprects;	/* pointer to userspace cliprects */
+} drm_i915_batchbuffer_t;
+
+/* As above, but pass a pointer to userspace buffer which can be
+ * validated by the kernel prior to sending to hardware.
+ */
+typedef struct _drm_i915_cmdbuffer {
+	char *buf;	/* pointer to userspace command buffer */
+	int sz;			/* nr bytes in buf */
+	int DR1;		/* hw flags for GFX_OP_DRAWRECT_INFO */
+	int DR4;		/* window origin for GFX_OP_DRAWRECT_INFO */
+	int num_cliprects;	/* mulitpass with multiple cliprects? */
+	struct drm_clip_rect *cliprects;	/* pointer to userspace cliprects */
+} drm_i915_cmdbuffer_t;
+
+/* Userspace can request & wait on irq's:
+ */
+typedef struct drm_i915_irq_emit {
+	int *irq_seq;
+} drm_i915_irq_emit_t;
+
+typedef struct drm_i915_irq_wait {
+	int irq_seq;
+} drm_i915_irq_wait_t;
+
+/*
+ * Different modes of per-process Graphics Translation Table,
+ * see I915_PARAM_HAS_ALIASING_PPGTT
+ */
+#define I915_GEM_PPGTT_NONE	0
+#define I915_GEM_PPGTT_ALIASING	1
+#define I915_GEM_PPGTT_FULL	2
+
+/* Ioctl to query kernel params:
+ */
+#define I915_PARAM_IRQ_ACTIVE            1
+#define I915_PARAM_ALLOW_BATCHBUFFER     2
+#define I915_PARAM_LAST_DISPATCH         3
+#define I915_PARAM_CHIPSET_ID            4
+#define I915_PARAM_HAS_GEM               5
+#define I915_PARAM_NUM_FENCES_AVAIL      6
+#define I915_PARAM_HAS_OVERLAY           7
+#define I915_PARAM_HAS_PAGEFLIPPING	 8
+#define I915_PARAM_HAS_EXECBUF2          9
+#define I915_PARAM_HAS_BSD		 10
+#define I915_PARAM_HAS_BLT		 11
+#define I915_PARAM_HAS_RELAXED_FENCING	 12
+#define I915_PARAM_HAS_COHERENT_RINGS	 13
+#define I915_PARAM_HAS_EXEC_CONSTANTS	 14
+#define I915_PARAM_HAS_RELAXED_DELTA	 15
+#define I915_PARAM_HAS_GEN7_SOL_RESET	 16
+#define I915_PARAM_HAS_LLC     	 	 17
+#define I915_PARAM_HAS_ALIASING_PPGTT	 18
+#define I915_PARAM_HAS_WAIT_TIMEOUT	 19
+#define I915_PARAM_HAS_SEMAPHORES	 20
+#define I915_PARAM_HAS_PRIME_VMAP_FLUSH	 21
+#define I915_PARAM_HAS_VEBOX		 22
+#define I915_PARAM_HAS_SECURE_BATCHES	 23
+#define I915_PARAM_HAS_PINNED_BATCHES	 24
+#define I915_PARAM_HAS_EXEC_NO_RELOC	 25
+#define I915_PARAM_HAS_EXEC_HANDLE_LUT   26
+#define I915_PARAM_HAS_WT     	 	 27
+#define I915_PARAM_CMD_PARSER_VERSION	 28
+#define I915_PARAM_HAS_COHERENT_PHYS_GTT 29
+#define I915_PARAM_MMAP_VERSION          30
+#define I915_PARAM_HAS_BSD2		 31
+#define I915_PARAM_REVISION              32
+#define I915_PARAM_SUBSLICE_TOTAL	 33
+#define I915_PARAM_EU_TOTAL		 34
+#define I915_PARAM_HAS_GPU_RESET	 35
+#define I915_PARAM_HAS_RESOURCE_STREAMER 36
+#define I915_PARAM_HAS_EXEC_SOFTPIN	 37
+#define I915_PARAM_HAS_POOLED_EU	 38
+#define I915_PARAM_MIN_EU_IN_POOL	 39
+#define I915_PARAM_MMAP_GTT_VERSION	 40
+
+/*
+ * Query whether DRM_I915_GEM_EXECBUFFER2 supports user defined execution
+ * priorities and the driver will attempt to execute batches in priority order.
+ * The param returns a capability bitmask, nonzero implies that the scheduler
+ * is enabled, with different features present according to the mask.
+ *
+ * The initial priority for each batch is supplied by the context and is
+ * controlled via I915_CONTEXT_PARAM_PRIORITY.
+ */
+#define I915_PARAM_HAS_SCHEDULER	 41
+#define   I915_SCHEDULER_CAP_ENABLED	(1ul << 0)
+#define   I915_SCHEDULER_CAP_PRIORITY	(1ul << 1)
+#define   I915_SCHEDULER_CAP_PREEMPTION	(1ul << 2)
+#define   I915_SCHEDULER_CAP_SEMAPHORES	(1ul << 3)
+#define   I915_SCHEDULER_CAP_ENGINE_BUSY_STATS	(1ul << 4)
+/*
+ * Indicates the 2k user priority levels are statically mapped into 3 buckets as
+ * follows:
+ *
+ * -1k to -1	Low priority
+ * 0		Normal priority
+ * 1 to 1k	Highest priority
+ */
+#define   I915_SCHEDULER_CAP_STATIC_PRIORITY_MAP	(1ul << 5)
+
+#define I915_PARAM_HUC_STATUS		 42
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports the ability to opt-out of
+ * synchronisation with implicit fencing on individual objects.
+ * See EXEC_OBJECT_ASYNC.
+ */
+#define I915_PARAM_HAS_EXEC_ASYNC	 43
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports explicit fence support -
+ * both being able to pass in a sync_file fd to wait upon before executing,
+ * and being able to return a new sync_file fd that is signaled when the
+ * current request is complete. See I915_EXEC_FENCE_IN and I915_EXEC_FENCE_OUT.
+ */
+#define I915_PARAM_HAS_EXEC_FENCE	 44
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports the ability to capture
+ * user specified bufffers for post-mortem debugging of GPU hangs. See
+ * EXEC_OBJECT_CAPTURE.
+ */
+#define I915_PARAM_HAS_EXEC_CAPTURE	 45
+
+#define I915_PARAM_SLICE_MASK		 46
+
+/* Assuming it's uniform for each slice, this queries the mask of subslices
+ * per-slice for this system.
+ */
+#define I915_PARAM_SUBSLICE_MASK	 47
+
+/*
+ * Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying the batch buffer
+ * as the first execobject as opposed to the last. See I915_EXEC_BATCH_FIRST.
+ */
+#define I915_PARAM_HAS_EXEC_BATCH_FIRST	 48
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying an array of
+ * drm_i915_gem_exec_fence structures.  See I915_EXEC_FENCE_ARRAY.
+ */
+#define I915_PARAM_HAS_EXEC_FENCE_ARRAY  49
+
+/*
+ * Query whether every context (both per-file default and user created) is
+ * isolated (insofar as HW supports). If this parameter is not true, then
+ * freshly created contexts may inherit values from an existing context,
+ * rather than default HW values. If true, it also ensures (insofar as HW
+ * supports) that all state set by this context will not leak to any other
+ * context.
+ *
+ * As not every engine across every gen support contexts, the returned
+ * value reports the support of context isolation for individual engines by
+ * returning a bitmask of each engine class set to true if that class supports
+ * isolation.
+ */
+#define I915_PARAM_HAS_CONTEXT_ISOLATION 50
+
+/* Frequency of the command streamer timestamps given by the *_TIMESTAMP
+ * registers. This used to be fixed per platform but from CNL onwards, this
+ * might vary depending on the parts.
+ */
+#define I915_PARAM_CS_TIMESTAMP_FREQUENCY 51
+
+/*
+ * Once upon a time we supposed that writes through the GGTT would be
+ * immediately in physical memory (once flushed out of the CPU path). However,
+ * on a few different processors and chipsets, this is not necessarily the case
+ * as the writes appear to be buffered internally. Thus a read of the backing
+ * storage (physical memory) via a different path (with different physical tags
+ * to the indirect write via the GGTT) will see stale values from before
+ * the GGTT write. Inside the kernel, we can for the most part keep track of
+ * the different read/write domains in use (e.g. set-domain), but the assumption
+ * of coherency is baked into the ABI, hence reporting its true state in this
+ * parameter.
+ *
+ * Reports true when writes via mmap_gtt are immediately visible following an
+ * lfence to flush the WCB.
+ *
+ * Reports false when writes via mmap_gtt are indeterminately delayed in an in
+ * internal buffer and are _not_ immediately visible to third parties accessing
+ * directly via mmap_cpu/mmap_wc. Use of mmap_gtt as part of an IPC
+ * communications channel when reporting false is strongly disadvised.
+ */
+#define I915_PARAM_MMAP_GTT_COHERENT	52
+
+/*
+ * Query whether DRM_I915_GEM_EXECBUFFER2 supports coordination of parallel
+ * execution through use of explicit fence support.
+ * See I915_EXEC_FENCE_OUT and I915_EXEC_FENCE_SUBMIT.
+ */
+#define I915_PARAM_HAS_EXEC_SUBMIT_FENCE 53
+
+/*
+ * Revision of the i915-perf uAPI. The value returned helps determine what
+ * i915-perf features are available. See drm_i915_perf_property_id.
+ */
+#define I915_PARAM_PERF_REVISION	54
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying an array of
+ * timeline syncobj through drm_i915_gem_execbuffer_ext_timeline_fences. See
+ * I915_EXEC_USE_EXTENSIONS.
+ */
+#define I915_PARAM_HAS_EXEC_TIMELINE_FENCES 55
+
+/* Query if the kernel supports the I915_USERPTR_PROBE flag. */
+#define I915_PARAM_HAS_USERPTR_PROBE 56
+
+/* Must be kept compact -- no holes and well documented */
+
+/**
+ * struct drm_i915_getparam - Driver parameter query structure.
+ */
+struct drm_i915_getparam {
+	/** @param: Driver parameter to query. */
+	__s32 param;
+
+	/**
+	 * @value: Address of memory where queried value should be put.
+	 *
+	 * WARNING: Using pointers instead of fixed-size u64 means we need to write
+	 * compat32 code. Don't repeat this mistake.
+	 */
+	int *value;
+};
+
+/**
+ * typedef drm_i915_getparam_t - Driver parameter query structure.
+ * See struct drm_i915_getparam.
+ */
+typedef struct drm_i915_getparam drm_i915_getparam_t;
+
+/* Ioctl to set kernel params:
+ */
+#define I915_SETPARAM_USE_MI_BATCHBUFFER_START            1
+#define I915_SETPARAM_TEX_LRU_LOG_GRANULARITY             2
+#define I915_SETPARAM_ALLOW_BATCHBUFFER                   3
+#define I915_SETPARAM_NUM_USED_FENCES                     4
+/* Must be kept compact -- no holes */
+
+typedef struct drm_i915_setparam {
+	int param;
+	int value;
+} drm_i915_setparam_t;
+
+/* A memory manager for regions of shared memory:
+ */
+#define I915_MEM_REGION_AGP 1
+
+typedef struct drm_i915_mem_alloc {
+	int region;
+	int alignment;
+	int size;
+	int *region_offset;	/* offset from start of fb or agp */
+} drm_i915_mem_alloc_t;
+
+typedef struct drm_i915_mem_free {
+	int region;
+	int region_offset;
+} drm_i915_mem_free_t;
+
+typedef struct drm_i915_mem_init_heap {
+	int region;
+	int size;
+	int start;
+} drm_i915_mem_init_heap_t;
+
+/* Allow memory manager to be torn down and re-initialized (eg on
+ * rotate):
+ */
+typedef struct drm_i915_mem_destroy_heap {
+	int region;
+} drm_i915_mem_destroy_heap_t;
+
+/* Allow X server to configure which pipes to monitor for vblank signals
+ */
+#define	DRM_I915_VBLANK_PIPE_A	1
+#define	DRM_I915_VBLANK_PIPE_B	2
+
+typedef struct drm_i915_vblank_pipe {
+	int pipe;
+} drm_i915_vblank_pipe_t;
+
+/* Schedule buffer swap at given vertical blank:
+ */
+typedef struct drm_i915_vblank_swap {
+	drm_drawable_t drawable;
+	enum drm_vblank_seq_type seqtype;
+	unsigned int sequence;
+} drm_i915_vblank_swap_t;
+
+typedef struct drm_i915_hws_addr {
+	__u64 addr;
+} drm_i915_hws_addr_t;
+
+struct drm_i915_gem_init {
+	/**
+	 * Beginning offset in the GTT to be managed by the DRM memory
+	 * manager.
+	 */
+	__u64 gtt_start;
+	/**
+	 * Ending offset in the GTT to be managed by the DRM memory
+	 * manager.
+	 */
+	__u64 gtt_end;
+};
+
+struct drm_i915_gem_create {
+	/**
+	 * Requested size for the object.
+	 *
+	 * The (page-aligned) allocated size for the object will be returned.
+	 */
+	__u64 size;
+	/**
+	 * Returned handle for the object.
+	 *
+	 * Object handles are nonzero.
+	 */
+	__u32 handle;
+	__u32 pad;
+};
+
+struct drm_i915_gem_pread {
+	/** Handle for the object being read. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset into the object to read from */
+	__u64 offset;
+	/** Length of data to read */
+	__u64 size;
+	/**
+	 * Pointer to write the data into.
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 data_ptr;
+};
+
+struct drm_i915_gem_pwrite {
+	/** Handle for the object being written to. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset into the object to write to */
+	__u64 offset;
+	/** Length of data to write */
+	__u64 size;
+	/**
+	 * Pointer to read the data from.
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 data_ptr;
+};
+
+struct drm_i915_gem_mmap {
+	/** Handle for the object being mapped. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset in the object to map. */
+	__u64 offset;
+	/**
+	 * Length of data to map.
+	 *
+	 * The value will be page-aligned.
+	 */
+	__u64 size;
+	/**
+	 * Returned pointer the data was mapped at.
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 addr_ptr;
+
+	/**
+	 * Flags for extended behaviour.
+	 *
+	 * Added in version 2.
+	 */
+	__u64 flags;
+#define I915_MMAP_WC 0x1
+};
+
+struct drm_i915_gem_mmap_gtt {
+	/** Handle for the object being mapped. */
+	__u32 handle;
+	__u32 pad;
+	/**
+	 * Fake offset to use for subsequent mmap call
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 offset;
+};
+
+/**
+ * struct drm_i915_gem_mmap_offset - Retrieve an offset so we can mmap this buffer object.
+ *
+ * This struct is passed as argument to the `DRM_IOCTL_I915_GEM_MMAP_OFFSET` ioctl,
+ * and is used to retrieve the fake offset to mmap an object specified by &handle.
+ *
+ * The legacy way of using `DRM_IOCTL_I915_GEM_MMAP` is removed on gen12+.
+ * `DRM_IOCTL_I915_GEM_MMAP_GTT` is an older supported alias to this struct, but will behave
+ * as setting the &extensions to 0, and &flags to `I915_MMAP_OFFSET_GTT`.
+ */
+struct drm_i915_gem_mmap_offset {
+	/** @handle: Handle for the object being mapped. */
+	__u32 handle;
+	/** @pad: Must be zero */
+	__u32 pad;
+	/**
+	 * @offset: The fake offset to use for subsequent mmap call
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 offset;
+
+	/**
+	 * @flags: Flags for extended behaviour.
+	 *
+	 * It is mandatory that one of the `MMAP_OFFSET` types
+	 * should be included:
+	 *
+	 * - `I915_MMAP_OFFSET_GTT`: Use mmap with the object bound to GTT. (Write-Combined)
+	 * - `I915_MMAP_OFFSET_WC`: Use Write-Combined caching.
+	 * - `I915_MMAP_OFFSET_WB`: Use Write-Back caching.
+	 * - `I915_MMAP_OFFSET_FIXED`: Use object placement to determine caching.
+	 *
+	 * On devices with local memory `I915_MMAP_OFFSET_FIXED` is the only valid
+	 * type. On devices without local memory, this caching mode is invalid.
+	 *
+	 * As caching mode when specifying `I915_MMAP_OFFSET_FIXED`, WC or WB will
+	 * be used, depending on the object placement on creation. WB will be used
+	 * when the object can only exist in system memory, WC otherwise.
+	 */
+	__u64 flags;
+
+#define I915_MMAP_OFFSET_GTT	0
+#define I915_MMAP_OFFSET_WC	1
+#define I915_MMAP_OFFSET_WB	2
+#define I915_MMAP_OFFSET_UC	3
+#define I915_MMAP_OFFSET_FIXED	4
+
+	/**
+	 * @extensions: Zero-terminated chain of extensions.
+	 *
+	 * No current extensions defined; mbz.
+	 */
+	__u64 extensions;
+};
+
+/**
+ * struct drm_i915_gem_set_domain - Adjust the objects write or read domain, in
+ * preparation for accessing the pages via some CPU domain.
+ *
+ * Specifying a new write or read domain will flush the object out of the
+ * previous domain(if required), before then updating the objects domain
+ * tracking with the new domain.
+ *
+ * Note this might involve waiting for the object first if it is still active on
+ * the GPU.
+ *
+ * Supported values for @read_domains and @write_domain:
+ *
+ *	- I915_GEM_DOMAIN_WC: Uncached write-combined domain
+ *	- I915_GEM_DOMAIN_CPU: CPU cache domain
+ *	- I915_GEM_DOMAIN_GTT: Mappable aperture domain
+ *
+ * All other domains are rejected.
+ *
+ * Note that for discrete, starting from DG1, this is no longer supported, and
+ * is instead rejected. On such platforms the CPU domain is effectively static,
+ * where we also only support a single &drm_i915_gem_mmap_offset cache mode,
+ * which can't be set explicitly and instead depends on the object placements,
+ * as per the below.
+ *
+ * Implicit caching rules, starting from DG1:
+ *
+ *	- If any of the object placements (see &drm_i915_gem_create_ext_memory_regions)
+ *	  contain I915_MEMORY_CLASS_DEVICE then the object will be allocated and
+ *	  mapped as write-combined only.
+ *
+ *	- Everything else is always allocated and mapped as write-back, with the
+ *	  guarantee that everything is also coherent with the GPU.
+ *
+ * Note that this is likely to change in the future again, where we might need
+ * more flexibility on future devices, so making this all explicit as part of a
+ * new &drm_i915_gem_create_ext extension is probable.
+ */
+struct drm_i915_gem_set_domain {
+	/** @handle: Handle for the object. */
+	__u32 handle;
+
+	/** @read_domains: New read domains. */
+	__u32 read_domains;
+
+	/**
+	 * @write_domain: New write domain.
+	 *
+	 * Note that having something in the write domain implies it's in the
+	 * read domain, and only that read domain.
+	 */
+	__u32 write_domain;
+};
+
+struct drm_i915_gem_sw_finish {
+	/** Handle for the object */
+	__u32 handle;
+};
+
+struct drm_i915_gem_relocation_entry {
+	/**
+	 * Handle of the buffer being pointed to by this relocation entry.
+	 *
+	 * It's appealing to make this be an index into the mm_validate_entry
+	 * list to refer to the buffer, but this allows the driver to create
+	 * a relocation list for state buffers and not re-write it per
+	 * exec using the buffer.
+	 */
+	__u32 target_handle;
+
+	/**
+	 * Value to be added to the offset of the target buffer to make up
+	 * the relocation entry.
+	 */
+	__u32 delta;
+
+	/** Offset in the buffer the relocation entry will be written into */
+	__u64 offset;
+
+	/**
+	 * Offset value of the target buffer that the relocation entry was last
+	 * written as.
+	 *
+	 * If the buffer has the same offset as last time, we can skip syncing
+	 * and writing the relocation.  This value is written back out by
+	 * the execbuffer ioctl when the relocation is written.
+	 */
+	__u64 presumed_offset;
+
+	/**
+	 * Target memory domains read by this operation.
+	 */
+	__u32 read_domains;
+
+	/**
+	 * Target memory domains written by this operation.
+	 *
+	 * Note that only one domain may be written by the whole
+	 * execbuffer operation, so that where there are conflicts,
+	 * the application will get -EINVAL back.
+	 */
+	__u32 write_domain;
+};
+
+/** @{
+ * Intel memory domains
+ *
+ * Most of these just align with the various caches in
+ * the system and are used to flush and invalidate as
+ * objects end up cached in different domains.
+ */
+/** CPU cache */
+#define I915_GEM_DOMAIN_CPU		0x00000001
+/** Render cache, used by 2D and 3D drawing */
+#define I915_GEM_DOMAIN_RENDER		0x00000002
+/** Sampler cache, used by texture engine */
+#define I915_GEM_DOMAIN_SAMPLER		0x00000004
+/** Command queue, used to load batch buffers */
+#define I915_GEM_DOMAIN_COMMAND		0x00000008
+/** Instruction cache, used by shader programs */
+#define I915_GEM_DOMAIN_INSTRUCTION	0x00000010
+/** Vertex address cache */
+#define I915_GEM_DOMAIN_VERTEX		0x00000020
+/** GTT domain - aperture and scanout */
+#define I915_GEM_DOMAIN_GTT		0x00000040
+/** WC domain - uncached access */
+#define I915_GEM_DOMAIN_WC		0x00000080
+/** @} */
+
+struct drm_i915_gem_exec_object {
+	/**
+	 * User's handle for a buffer to be bound into the GTT for this
+	 * operation.
+	 */
+	__u32 handle;
+
+	/** Number of relocations to be performed on this buffer */
+	__u32 relocation_count;
+	/**
+	 * Pointer to array of struct drm_i915_gem_relocation_entry containing
+	 * the relocations to be performed in this buffer.
+	 */
+	__u64 relocs_ptr;
+
+	/** Required alignment in graphics aperture */
+	__u64 alignment;
+
+	/**
+	 * Returned value of the updated offset of the object, for future
+	 * presumed_offset writes.
+	 */
+	__u64 offset;
+};
+
+/* DRM_IOCTL_I915_GEM_EXECBUFFER was removed in Linux 5.13 */
+struct drm_i915_gem_execbuffer {
+	/**
+	 * List of buffers to be validated with their relocations to be
+	 * performend on them.
+	 *
+	 * This is a pointer to an array of struct drm_i915_gem_validate_entry.
+	 *
+	 * These buffers must be listed in an order such that all relocations
+	 * a buffer is performing refer to buffers that have already appeared
+	 * in the validate list.
+	 */
+	__u64 buffers_ptr;
+	__u32 buffer_count;
+
+	/** Offset in the batchbuffer to start execution from. */
+	__u32 batch_start_offset;
+	/** Bytes used in batchbuffer from batch_start_offset */
+	__u32 batch_len;
+	__u32 DR1;
+	__u32 DR4;
+	__u32 num_cliprects;
+	/** This is a struct drm_clip_rect *cliprects */
+	__u64 cliprects_ptr;
+};
+
+struct drm_i915_gem_exec_object2 {
+	/**
+	 * User's handle for a buffer to be bound into the GTT for this
+	 * operation.
+	 */
+	__u32 handle;
+
+	/** Number of relocations to be performed on this buffer */
+	__u32 relocation_count;
+	/**
+	 * Pointer to array of struct drm_i915_gem_relocation_entry containing
+	 * the relocations to be performed in this buffer.
+	 */
+	__u64 relocs_ptr;
+
+	/** Required alignment in graphics aperture */
+	__u64 alignment;
+
+	/**
+	 * When the EXEC_OBJECT_PINNED flag is specified this is populated by
+	 * the user with the GTT offset at which this object will be pinned.
+	 *
+	 * When the I915_EXEC_NO_RELOC flag is specified this must contain the
+	 * presumed_offset of the object.
+	 *
+	 * During execbuffer2 the kernel populates it with the value of the
+	 * current GTT offset of the object, for future presumed_offset writes.
+	 *
+	 * See struct drm_i915_gem_create_ext for the rules when dealing with
+	 * alignment restrictions with I915_MEMORY_CLASS_DEVICE, on devices with
+	 * minimum page sizes, like DG2.
+	 */
+	__u64 offset;
+
+#define EXEC_OBJECT_NEEDS_FENCE		 (1<<0)
+#define EXEC_OBJECT_NEEDS_GTT		 (1<<1)
+#define EXEC_OBJECT_WRITE		 (1<<2)
+#define EXEC_OBJECT_SUPPORTS_48B_ADDRESS (1<<3)
+#define EXEC_OBJECT_PINNED		 (1<<4)
+#define EXEC_OBJECT_PAD_TO_SIZE		 (1<<5)
+/* The kernel implicitly tracks GPU activity on all GEM objects, and
+ * synchronises operations with outstanding rendering. This includes
+ * rendering on other devices if exported via dma-buf. However, sometimes
+ * this tracking is too coarse and the user knows better. For example,
+ * if the object is split into non-overlapping ranges shared between different
+ * clients or engines (i.e. suballocating objects), the implicit tracking
+ * by kernel assumes that each operation affects the whole object rather
+ * than an individual range, causing needless synchronisation between clients.
+ * The kernel will also forgo any CPU cache flushes prior to rendering from
+ * the object as the client is expected to be also handling such domain
+ * tracking.
+ *
+ * The kernel maintains the implicit tracking in order to manage resources
+ * used by the GPU - this flag only disables the synchronisation prior to
+ * rendering with this object in this execbuf.
+ *
+ * Opting out of implicit synhronisation requires the user to do its own
+ * explicit tracking to avoid rendering corruption. See, for example,
+ * I915_PARAM_HAS_EXEC_FENCE to order execbufs and execute them asynchronously.
+ */
+#define EXEC_OBJECT_ASYNC		(1<<6)
+/* Request that the contents of this execobject be copied into the error
+ * state upon a GPU hang involving this batch for post-mortem debugging.
+ * These buffers are recorded in no particular order as "user" in
+ * /sys/class/drm/cardN/error. Query I915_PARAM_HAS_EXEC_CAPTURE to see
+ * if the kernel supports this flag.
+ */
+#define EXEC_OBJECT_CAPTURE		(1<<7)
+/* All remaining bits are MBZ and RESERVED FOR FUTURE USE */
+#define __EXEC_OBJECT_UNKNOWN_FLAGS -(EXEC_OBJECT_CAPTURE<<1)
+	__u64 flags;
+
+	union {
+		__u64 rsvd1;
+		__u64 pad_to_size;
+	};
+	__u64 rsvd2;
+};
+
+/**
+ * struct drm_i915_gem_exec_fence - An input or output fence for the execbuf
+ * ioctl.
+ *
+ * The request will wait for input fence to signal before submission.
+ *
+ * The returned output fence will be signaled after the completion of the
+ * request.
+ */
+struct drm_i915_gem_exec_fence {
+	/** @handle: User's handle for a drm_syncobj to wait on or signal. */
+	__u32 handle;
+
+	/**
+	 * @flags: Supported flags are:
+	 *
+	 * I915_EXEC_FENCE_WAIT:
+	 * Wait for the input fence before request submission.
+	 *
+	 * I915_EXEC_FENCE_SIGNAL:
+	 * Return request completion fence as output
+	 */
+	__u32 flags;
+#define I915_EXEC_FENCE_WAIT            (1<<0)
+#define I915_EXEC_FENCE_SIGNAL          (1<<1)
+#define __I915_EXEC_FENCE_UNKNOWN_FLAGS (-(I915_EXEC_FENCE_SIGNAL << 1))
+};
+
+/**
+ * struct drm_i915_gem_execbuffer_ext_timeline_fences - Timeline fences
+ * for execbuf ioctl.
+ *
+ * This structure describes an array of drm_syncobj and associated points for
+ * timeline variants of drm_syncobj. It is invalid to append this structure to
+ * the execbuf if I915_EXEC_FENCE_ARRAY is set.
+ */
+struct drm_i915_gem_execbuffer_ext_timeline_fences {
+#define DRM_I915_GEM_EXECBUFFER_EXT_TIMELINE_FENCES 0
+	/** @base: Extension link. See struct i915_user_extension. */
+	struct i915_user_extension base;
+
+	/**
+	 * @fence_count: Number of elements in the @handles_ptr & @value_ptr
+	 * arrays.
+	 */
+	__u64 fence_count;
+
+	/**
+	 * @handles_ptr: Pointer to an array of struct drm_i915_gem_exec_fence
+	 * of length @fence_count.
+	 */
+	__u64 handles_ptr;
+
+	/**
+	 * @values_ptr: Pointer to an array of u64 values of length
+	 * @fence_count.
+	 * Values must be 0 for a binary drm_syncobj. A Value of 0 for a
+	 * timeline drm_syncobj is invalid as it turns a drm_syncobj into a
+	 * binary one.
+	 */
+	__u64 values_ptr;
+};
+
+/**
+ * struct drm_i915_gem_execbuffer2 - Structure for DRM_I915_GEM_EXECBUFFER2
+ * ioctl.
+ */
+struct drm_i915_gem_execbuffer2 {
+	/** @buffers_ptr: Pointer to a list of gem_exec_object2 structs */
+	__u64 buffers_ptr;
+
+	/** @buffer_count: Number of elements in @buffers_ptr array */
+	__u32 buffer_count;
+
+	/**
+	 * @batch_start_offset: Offset in the batchbuffer to start execution
+	 * from.
+	 */
+	__u32 batch_start_offset;
+
+	/**
+	 * @batch_len: Length in bytes of the batch buffer, starting from the
+	 * @batch_start_offset. If 0, length is assumed to be the batch buffer
+	 * object size.
+	 */
+	__u32 batch_len;
+
+	/** @DR1: deprecated */
+	__u32 DR1;
+
+	/** @DR4: deprecated */
+	__u32 DR4;
+
+	/** @num_cliprects: See @cliprects_ptr */
+	__u32 num_cliprects;
+
+	/**
+	 * @cliprects_ptr: Kernel clipping was a DRI1 misfeature.
+	 *
+	 * It is invalid to use this field if I915_EXEC_FENCE_ARRAY or
+	 * I915_EXEC_USE_EXTENSIONS flags are not set.
+	 *
+	 * If I915_EXEC_FENCE_ARRAY is set, then this is a pointer to an array
+	 * of &drm_i915_gem_exec_fence and @num_cliprects is the length of the
+	 * array.
+	 *
+	 * If I915_EXEC_USE_EXTENSIONS is set, then this is a pointer to a
+	 * single &i915_user_extension and num_cliprects is 0.
+	 */
+	__u64 cliprects_ptr;
+
+	/** @flags: Execbuf flags */
+	__u64 flags;
+#define I915_EXEC_RING_MASK              (0x3f)
+#define I915_EXEC_DEFAULT                (0<<0)
+#define I915_EXEC_RENDER                 (1<<0)
+#define I915_EXEC_BSD                    (2<<0)
+#define I915_EXEC_BLT                    (3<<0)
+#define I915_EXEC_VEBOX                  (4<<0)
+
+/* Used for switching the constants addressing mode on gen4+ RENDER ring.
+ * Gen6+ only supports relative addressing to dynamic state (default) and
+ * absolute addressing.
+ *
+ * These flags are ignored for the BSD and BLT rings.
+ */
+#define I915_EXEC_CONSTANTS_MASK 	(3<<6)
+#define I915_EXEC_CONSTANTS_REL_GENERAL (0<<6) /* default */
+#define I915_EXEC_CONSTANTS_ABSOLUTE 	(1<<6)
+#define I915_EXEC_CONSTANTS_REL_SURFACE (2<<6) /* gen4/5 only */
+
+/** Resets the SO write offset registers for transform feedback on gen7. */
+#define I915_EXEC_GEN7_SOL_RESET	(1<<8)
+
+/** Request a privileged ("secure") batch buffer. Note only available for
+ * DRM_ROOT_ONLY | DRM_MASTER processes.
+ */
+#define I915_EXEC_SECURE		(1<<9)
+
+/** Inform the kernel that the batch is and will always be pinned. This
+ * negates the requirement for a workaround to be performed to avoid
+ * an incoherent CS (such as can be found on 830/845). If this flag is
+ * not passed, the kernel will endeavour to make sure the batch is
+ * coherent with the CS before execution. If this flag is passed,
+ * userspace assumes the responsibility for ensuring the same.
+ */
+#define I915_EXEC_IS_PINNED		(1<<10)
+
+/** Provide a hint to the kernel that the command stream and auxiliary
+ * state buffers already holds the correct presumed addresses and so the
+ * relocation process may be skipped if no buffers need to be moved in
+ * preparation for the execbuffer.
+ */
+#define I915_EXEC_NO_RELOC		(1<<11)
+
+/** Use the reloc.handle as an index into the exec object array rather
+ * than as the per-file handle.
+ */
+#define I915_EXEC_HANDLE_LUT		(1<<12)
+
+/** Used for switching BSD rings on the platforms with two BSD rings */
+#define I915_EXEC_BSD_SHIFT	 (13)
+#define I915_EXEC_BSD_MASK	 (3 << I915_EXEC_BSD_SHIFT)
+/* default ping-pong mode */
+#define I915_EXEC_BSD_DEFAULT	 (0 << I915_EXEC_BSD_SHIFT)
+#define I915_EXEC_BSD_RING1	 (1 << I915_EXEC_BSD_SHIFT)
+#define I915_EXEC_BSD_RING2	 (2 << I915_EXEC_BSD_SHIFT)
+
+/** Tell the kernel that the batchbuffer is processed by
+ *  the resource streamer.
+ */
+#define I915_EXEC_RESOURCE_STREAMER     (1<<15)
+
+/* Setting I915_EXEC_FENCE_IN implies that lower_32_bits(rsvd2) represent
+ * a sync_file fd to wait upon (in a nonblocking manner) prior to executing
+ * the batch.
+ *
+ * Returns -EINVAL if the sync_file fd cannot be found.
+ */
+#define I915_EXEC_FENCE_IN		(1<<16)
+
+/* Setting I915_EXEC_FENCE_OUT causes the ioctl to return a sync_file fd
+ * in the upper_32_bits(rsvd2) upon success. Ownership of the fd is given
+ * to the caller, and it should be close() after use. (The fd is a regular
+ * file descriptor and will be cleaned up on process termination. It holds
+ * a reference to the request, but nothing else.)
+ *
+ * The sync_file fd can be combined with other sync_file and passed either
+ * to execbuf using I915_EXEC_FENCE_IN, to atomic KMS ioctls (so that a flip
+ * will only occur after this request completes), or to other devices.
+ *
+ * Using I915_EXEC_FENCE_OUT requires use of
+ * DRM_IOCTL_I915_GEM_EXECBUFFER2_WR ioctl so that the result is written
+ * back to userspace. Failure to do so will cause the out-fence to always
+ * be reported as zero, and the real fence fd to be leaked.
+ */
+#define I915_EXEC_FENCE_OUT		(1<<17)
+
+/*
+ * Traditionally the execbuf ioctl has only considered the final element in
+ * the execobject[] to be the executable batch. Often though, the client
+ * will known the batch object prior to construction and being able to place
+ * it into the execobject[] array first can simplify the relocation tracking.
+ * Setting I915_EXEC_BATCH_FIRST tells execbuf to use element 0 of the
+ * execobject[] as the * batch instead (the default is to use the last
+ * element).
+ */
+#define I915_EXEC_BATCH_FIRST		(1<<18)
+
+/* Setting I915_FENCE_ARRAY implies that num_cliprects and cliprects_ptr
+ * define an array of i915_gem_exec_fence structures which specify a set of
+ * dma fences to wait upon or signal.
+ */
+#define I915_EXEC_FENCE_ARRAY   (1<<19)
+
+/*
+ * Setting I915_EXEC_FENCE_SUBMIT implies that lower_32_bits(rsvd2) represent
+ * a sync_file fd to wait upon (in a nonblocking manner) prior to executing
+ * the batch.
+ *
+ * Returns -EINVAL if the sync_file fd cannot be found.
+ */
+#define I915_EXEC_FENCE_SUBMIT		(1 << 20)
+
+/*
+ * Setting I915_EXEC_USE_EXTENSIONS implies that
+ * drm_i915_gem_execbuffer2.cliprects_ptr is treated as a pointer to an linked
+ * list of i915_user_extension. Each i915_user_extension node is the base of a
+ * larger structure. The list of supported structures are listed in the
+ * drm_i915_gem_execbuffer_ext enum.
+ */
+#define I915_EXEC_USE_EXTENSIONS	(1 << 21)
+#define __I915_EXEC_UNKNOWN_FLAGS (-(I915_EXEC_USE_EXTENSIONS << 1))
+
+	/** @rsvd1: Context id */
+	__u64 rsvd1;
+
+	/**
+	 * @rsvd2: in and out sync_file file descriptors.
+	 *
+	 * When I915_EXEC_FENCE_IN or I915_EXEC_FENCE_SUBMIT flag is set, the
+	 * lower 32 bits of this field will have the in sync_file fd (input).
+	 *
+	 * When I915_EXEC_FENCE_OUT flag is set, the upper 32 bits of this
+	 * field will have the out sync_file fd (output).
+	 */
+	__u64 rsvd2;
+};
+
+#define I915_EXEC_CONTEXT_ID_MASK	(0xffffffff)
+#define i915_execbuffer2_set_context_id(eb2, context) \
+	(eb2).rsvd1 = context & I915_EXEC_CONTEXT_ID_MASK
+#define i915_execbuffer2_get_context_id(eb2) \
+	((eb2).rsvd1 & I915_EXEC_CONTEXT_ID_MASK)
+
+struct drm_i915_gem_pin {
+	/** Handle of the buffer to be pinned. */
+	__u32 handle;
+	__u32 pad;
+
+	/** alignment required within the aperture */
+	__u64 alignment;
+
+	/** Returned GTT offset of the buffer. */
+	__u64 offset;
+};
+
+struct drm_i915_gem_unpin {
+	/** Handle of the buffer to be unpinned. */
+	__u32 handle;
+	__u32 pad;
+};
+
+struct drm_i915_gem_busy {
+	/** Handle of the buffer to check for busy */
+	__u32 handle;
+
+	/** Return busy status
+	 *
+	 * A return of 0 implies that the object is idle (after
+	 * having flushed any pending activity), and a non-zero return that
+	 * the object is still in-flight on the GPU. (The GPU has not yet
+	 * signaled completion for all pending requests that reference the
+	 * object.) An object is guaranteed to become idle eventually (so
+	 * long as no new GPU commands are executed upon it). Due to the
+	 * asynchronous nature of the hardware, an object reported
+	 * as busy may become idle before the ioctl is completed.
+	 *
+	 * Furthermore, if the object is busy, which engine is busy is only
+	 * provided as a guide and only indirectly by reporting its class
+	 * (there may be more than one engine in each class). There are race
+	 * conditions which prevent the report of which engines are busy from
+	 * being always accurate.  However, the converse is not true. If the
+	 * object is idle, the result of the ioctl, that all engines are idle,
+	 * is accurate.
+	 *
+	 * The returned dword is split into two fields to indicate both
+	 * the engine classess on which the object is being read, and the
+	 * engine class on which it is currently being written (if any).
+	 *
+	 * The low word (bits 0:15) indicate if the object is being written
+	 * to by any engine (there can only be one, as the GEM implicit
+	 * synchronisation rules force writes to be serialised). Only the
+	 * engine class (offset by 1, I915_ENGINE_CLASS_RENDER is reported as
+	 * 1 not 0 etc) for the last write is reported.
+	 *
+	 * The high word (bits 16:31) are a bitmask of which engines classes
+	 * are currently reading from the object. Multiple engines may be
+	 * reading from the object simultaneously.
+	 *
+	 * The value of each engine class is the same as specified in the
+	 * I915_CONTEXT_PARAM_ENGINES context parameter and via perf, i.e.
+	 * I915_ENGINE_CLASS_RENDER, I915_ENGINE_CLASS_COPY, etc.
+	 * Some hardware may have parallel execution engines, e.g. multiple
+	 * media engines, which are mapped to the same class identifier and so
+	 * are not separately reported for busyness.
+	 *
+	 * Caveat emptor:
+	 * Only the boolean result of this query is reliable; that is whether
+	 * the object is idle or busy. The report of which engines are busy
+	 * should be only used as a heuristic.
+	 */
+	__u32 busy;
+};
+
+/**
+ * struct drm_i915_gem_caching - Set or get the caching for given object
+ * handle.
+ *
+ * Allow userspace to control the GTT caching bits for a given object when the
+ * object is later mapped through the ppGTT(or GGTT on older platforms lacking
+ * ppGTT support, or if the object is used for scanout). Note that this might
+ * require unbinding the object from the GTT first, if its current caching value
+ * doesn't match.
+ *
+ * Note that this all changes on discrete platforms, starting from DG1, the
+ * set/get caching is no longer supported, and is now rejected.  Instead the CPU
+ * caching attributes(WB vs WC) will become an immutable creation time property
+ * for the object, along with the GTT caching level. For now we don't expose any
+ * new uAPI for this, instead on DG1 this is all implicit, although this largely
+ * shouldn't matter since DG1 is coherent by default(without any way of
+ * controlling it).
+ *
+ * Implicit caching rules, starting from DG1:
+ *
+ *     - If any of the object placements (see &drm_i915_gem_create_ext_memory_regions)
+ *       contain I915_MEMORY_CLASS_DEVICE then the object will be allocated and
+ *       mapped as write-combined only.
+ *
+ *     - Everything else is always allocated and mapped as write-back, with the
+ *       guarantee that everything is also coherent with the GPU.
+ *
+ * Note that this is likely to change in the future again, where we might need
+ * more flexibility on future devices, so making this all explicit as part of a
+ * new &drm_i915_gem_create_ext extension is probable.
+ *
+ * Side note: Part of the reason for this is that changing the at-allocation-time CPU
+ * caching attributes for the pages might be required(and is expensive) if we
+ * need to then CPU map the pages later with different caching attributes. This
+ * inconsistent caching behaviour, while supported on x86, is not universally
+ * supported on other architectures. So for simplicity we opt for setting
+ * everything at creation time, whilst also making it immutable, on discrete
+ * platforms.
+ */
+struct drm_i915_gem_caching {
+	/**
+	 * @handle: Handle of the buffer to set/get the caching level.
+	 */
+	__u32 handle;
+
+	/**
+	 * @caching: The GTT caching level to apply or possible return value.
+	 *
+	 * The supported @caching values:
+	 *
+	 * I915_CACHING_NONE:
+	 *
+	 * GPU access is not coherent with CPU caches.  Default for machines
+	 * without an LLC. This means manual flushing might be needed, if we
+	 * want GPU access to be coherent.
+	 *
+	 * I915_CACHING_CACHED:
+	 *
+	 * GPU access is coherent with CPU caches and furthermore the data is
+	 * cached in last-level caches shared between CPU cores and the GPU GT.
+	 *
+	 * I915_CACHING_DISPLAY:
+	 *
+	 * Special GPU caching mode which is coherent with the scanout engines.
+	 * Transparently falls back to I915_CACHING_NONE on platforms where no
+	 * special cache mode (like write-through or gfdt flushing) is
+	 * available. The kernel automatically sets this mode when using a
+	 * buffer as a scanout target.  Userspace can manually set this mode to
+	 * avoid a costly stall and clflush in the hotpath of drawing the first
+	 * frame.
+	 */
+#define I915_CACHING_NONE		0
+#define I915_CACHING_CACHED		1
+#define I915_CACHING_DISPLAY		2
+	__u32 caching;
+};
+
+#define I915_TILING_NONE	0
+#define I915_TILING_X		1
+#define I915_TILING_Y		2
+/*
+ * Do not add new tiling types here.  The I915_TILING_* values are for
+ * de-tiling fence registers that no longer exist on modern platforms.  Although
+ * the hardware may support new types of tiling in general (e.g., Tile4), we
+ * do not need to add them to the uapi that is specific to now-defunct ioctls.
+ */
+#define I915_TILING_LAST	I915_TILING_Y
+
+#define I915_BIT_6_SWIZZLE_NONE		0
+#define I915_BIT_6_SWIZZLE_9		1
+#define I915_BIT_6_SWIZZLE_9_10		2
+#define I915_BIT_6_SWIZZLE_9_11		3
+#define I915_BIT_6_SWIZZLE_9_10_11	4
+/* Not seen by userland */
+#define I915_BIT_6_SWIZZLE_UNKNOWN	5
+/* Seen by userland. */
+#define I915_BIT_6_SWIZZLE_9_17		6
+#define I915_BIT_6_SWIZZLE_9_10_17	7
+
+struct drm_i915_gem_set_tiling {
+	/** Handle of the buffer to have its tiling state updated */
+	__u32 handle;
+
+	/**
+	 * Tiling mode for the object (I915_TILING_NONE, I915_TILING_X,
+	 * I915_TILING_Y).
+	 *
+	 * This value is to be set on request, and will be updated by the
+	 * kernel on successful return with the actual chosen tiling layout.
+	 *
+	 * The tiling mode may be demoted to I915_TILING_NONE when the system
+	 * has bit 6 swizzling that can't be managed correctly by GEM.
+	 *
+	 * Buffer contents become undefined when changing tiling_mode.
+	 */
+	__u32 tiling_mode;
+
+	/**
+	 * Stride in bytes for the object when in I915_TILING_X or
+	 * I915_TILING_Y.
+	 */
+	__u32 stride;
+
+	/**
+	 * Returned address bit 6 swizzling required for CPU access through
+	 * mmap mapping.
+	 */
+	__u32 swizzle_mode;
+};
+
+struct drm_i915_gem_get_tiling {
+	/** Handle of the buffer to get tiling state for. */
+	__u32 handle;
+
+	/**
+	 * Current tiling mode for the object (I915_TILING_NONE, I915_TILING_X,
+	 * I915_TILING_Y).
+	 */
+	__u32 tiling_mode;
+
+	/**
+	 * Returned address bit 6 swizzling required for CPU access through
+	 * mmap mapping.
+	 */
+	__u32 swizzle_mode;
+
+	/**
+	 * Returned address bit 6 swizzling required for CPU access through
+	 * mmap mapping whilst bound.
+	 */
+	__u32 phys_swizzle_mode;
+};
+
+struct drm_i915_gem_get_aperture {
+	/** Total size of the aperture used by i915_gem_execbuffer, in bytes */
+	__u64 aper_size;
+
+	/**
+	 * Available space in the aperture used by i915_gem_execbuffer, in
+	 * bytes
+	 */
+	__u64 aper_available_size;
+};
+
+struct drm_i915_get_pipe_from_crtc_id {
+	/** ID of CRTC being requested **/
+	__u32 crtc_id;
+
+	/** pipe of requested CRTC **/
+	__u32 pipe;
+};
+
+#define I915_MADV_WILLNEED 0
+#define I915_MADV_DONTNEED 1
+#define __I915_MADV_PURGED 2 /* internal state */
+
+struct drm_i915_gem_madvise {
+	/** Handle of the buffer to change the backing store advice */
+	__u32 handle;
+
+	/* Advice: either the buffer will be needed again in the near future,
+	 *         or wont be and could be discarded under memory pressure.
+	 */
+	__u32 madv;
+
+	/** Whether the backing store still exists. */
+	__u32 retained;
+};
+
+/* flags */
+#define I915_OVERLAY_TYPE_MASK 		0xff
+#define I915_OVERLAY_YUV_PLANAR 	0x01
+#define I915_OVERLAY_YUV_PACKED 	0x02
+#define I915_OVERLAY_RGB		0x03
+
+#define I915_OVERLAY_DEPTH_MASK		0xff00
+#define I915_OVERLAY_RGB24		0x1000
+#define I915_OVERLAY_RGB16		0x2000
+#define I915_OVERLAY_RGB15		0x3000
+#define I915_OVERLAY_YUV422		0x0100
+#define I915_OVERLAY_YUV411		0x0200
+#define I915_OVERLAY_YUV420		0x0300
+#define I915_OVERLAY_YUV410		0x0400
+
+#define I915_OVERLAY_SWAP_MASK		0xff0000
+#define I915_OVERLAY_NO_SWAP		0x000000
+#define I915_OVERLAY_UV_SWAP		0x010000
+#define I915_OVERLAY_Y_SWAP		0x020000
+#define I915_OVERLAY_Y_AND_UV_SWAP	0x030000
+
+#define I915_OVERLAY_FLAGS_MASK		0xff000000
+#define I915_OVERLAY_ENABLE		0x01000000
+
+struct drm_intel_overlay_put_image {
+	/* various flags and src format description */
+	__u32 flags;
+	/* source picture description */
+	__u32 bo_handle;
+	/* stride values and offsets are in bytes, buffer relative */
+	__u16 stride_Y; /* stride for packed formats */
+	__u16 stride_UV;
+	__u32 offset_Y; /* offset for packet formats */
+	__u32 offset_U;
+	__u32 offset_V;
+	/* in pixels */
+	__u16 src_width;
+	__u16 src_height;
+	/* to compensate the scaling factors for partially covered surfaces */
+	__u16 src_scan_width;
+	__u16 src_scan_height;
+	/* output crtc description */
+	__u32 crtc_id;
+	__u16 dst_x;
+	__u16 dst_y;
+	__u16 dst_width;
+	__u16 dst_height;
+};
+
+/* flags */
+#define I915_OVERLAY_UPDATE_ATTRS	(1<<0)
+#define I915_OVERLAY_UPDATE_GAMMA	(1<<1)
+#define I915_OVERLAY_DISABLE_DEST_COLORKEY	(1<<2)
+struct drm_intel_overlay_attrs {
+	__u32 flags;
+	__u32 color_key;
+	__s32 brightness;
+	__u32 contrast;
+	__u32 saturation;
+	__u32 gamma0;
+	__u32 gamma1;
+	__u32 gamma2;
+	__u32 gamma3;
+	__u32 gamma4;
+	__u32 gamma5;
+};
+
+/*
+ * Intel sprite handling
+ *
+ * Color keying works with a min/mask/max tuple.  Both source and destination
+ * color keying is allowed.
+ *
+ * Source keying:
+ * Sprite pixels within the min & max values, masked against the color channels
+ * specified in the mask field, will be transparent.  All other pixels will
+ * be displayed on top of the primary plane.  For RGB surfaces, only the min
+ * and mask fields will be used; ranged compares are not allowed.
+ *
+ * Destination keying:
+ * Primary plane pixels that match the min value, masked against the color
+ * channels specified in the mask field, will be replaced by corresponding
+ * pixels from the sprite plane.
+ *
+ * Note that source & destination keying are exclusive; only one can be
+ * active on a given plane.
+ */
+
+#define I915_SET_COLORKEY_NONE		(1<<0) /* Deprecated. Instead set
+						* flags==0 to disable colorkeying.
+						*/
+#define I915_SET_COLORKEY_DESTINATION	(1<<1)
+#define I915_SET_COLORKEY_SOURCE	(1<<2)
+struct drm_intel_sprite_colorkey {
+	__u32 plane_id;
+	__u32 min_value;
+	__u32 channel_mask;
+	__u32 max_value;
+	__u32 flags;
+};
+
+struct drm_i915_gem_wait {
+	/** Handle of BO we shall wait on */
+	__u32 bo_handle;
+	__u32 flags;
+	/** Number of nanoseconds to wait, Returns time remaining. */
+	__s64 timeout_ns;
+};
+
+struct drm_i915_gem_context_create {
+	__u32 ctx_id; /* output: id of new context*/
+	__u32 pad;
+};
+
+/**
+ * struct drm_i915_gem_context_create_ext - Structure for creating contexts.
+ */
+struct drm_i915_gem_context_create_ext {
+	/** @ctx_id: Id of the created context (output) */
+	__u32 ctx_id;
+
+	/**
+	 * @flags: Supported flags are:
+	 *
+	 * I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS:
+	 *
+	 * Extensions may be appended to this structure and driver must check
+	 * for those. See @extensions.
+	 *
+	 * I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE
+	 *
+	 * Created context will have single timeline.
+	 */
+	__u32 flags;
+#define I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS	(1u << 0)
+#define I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE	(1u << 1)
+#define I915_CONTEXT_CREATE_FLAGS_UNKNOWN \
+	(-(I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE << 1))
+
+	/**
+	 * @extensions: Zero-terminated chain of extensions.
+	 *
+	 * I915_CONTEXT_CREATE_EXT_SETPARAM:
+	 * Context parameter to set or query during context creation.
+	 * See struct drm_i915_gem_context_create_ext_setparam.
+	 *
+	 * I915_CONTEXT_CREATE_EXT_CLONE:
+	 * This extension has been removed. On the off chance someone somewhere
+	 * has attempted to use it, never re-use this extension number.
+	 */
+	__u64 extensions;
+#define I915_CONTEXT_CREATE_EXT_SETPARAM 0
+#define I915_CONTEXT_CREATE_EXT_CLONE 1
+};
+
+/**
+ * struct drm_i915_gem_context_param - Context parameter to set or query.
+ */
+struct drm_i915_gem_context_param {
+	/** @ctx_id: Context id */
+	__u32 ctx_id;
+
+	/** @size: Size of the parameter @value */
+	__u32 size;
+
+	/** @param: Parameter to set or query */
+	__u64 param;
+#define I915_CONTEXT_PARAM_BAN_PERIOD	0x1
+/* I915_CONTEXT_PARAM_NO_ZEROMAP has been removed.  On the off chance
+ * someone somewhere has attempted to use it, never re-use this context
+ * param number.
+ */
+#define I915_CONTEXT_PARAM_NO_ZEROMAP	0x2
+#define I915_CONTEXT_PARAM_GTT_SIZE	0x3
+#define I915_CONTEXT_PARAM_NO_ERROR_CAPTURE	0x4
+#define I915_CONTEXT_PARAM_BANNABLE	0x5
+#define I915_CONTEXT_PARAM_PRIORITY	0x6
+#define   I915_CONTEXT_MAX_USER_PRIORITY	1023 /* inclusive */
+#define   I915_CONTEXT_DEFAULT_PRIORITY		0
+#define   I915_CONTEXT_MIN_USER_PRIORITY	-1023 /* inclusive */
+	/*
+	 * When using the following param, value should be a pointer to
+	 * drm_i915_gem_context_param_sseu.
+	 */
+#define I915_CONTEXT_PARAM_SSEU		0x7
+
+/*
+ * Not all clients may want to attempt automatic recover of a context after
+ * a hang (for example, some clients may only submit very small incremental
+ * batches relying on known logical state of previous batches which will never
+ * recover correctly and each attempt will hang), and so would prefer that
+ * the context is forever banned instead.
+ *
+ * If set to false (0), after a reset, subsequent (and in flight) rendering
+ * from this context is discarded, and the client will need to create a new
+ * context to use instead.
+ *
+ * If set to true (1), the kernel will automatically attempt to recover the
+ * context by skipping the hanging batch and executing the next batch starting
+ * from the default context state (discarding the incomplete logical context
+ * state lost due to the reset).
+ *
+ * On creation, all new contexts are marked as recoverable.
+ */
+#define I915_CONTEXT_PARAM_RECOVERABLE	0x8
+
+	/*
+	 * The id of the associated virtual memory address space (ppGTT) of
+	 * this context. Can be retrieved and passed to another context
+	 * (on the same fd) for both to use the same ppGTT and so share
+	 * address layouts, and avoid reloading the page tables on context
+	 * switches between themselves.
+	 *
+	 * See DRM_I915_GEM_VM_CREATE and DRM_I915_GEM_VM_DESTROY.
+	 */
+#define I915_CONTEXT_PARAM_VM		0x9
+
+/*
+ * I915_CONTEXT_PARAM_ENGINES:
+ *
+ * Bind this context to operate on this subset of available engines. Henceforth,
+ * the I915_EXEC_RING selector for DRM_IOCTL_I915_GEM_EXECBUFFER2 operates as
+ * an index into this array of engines; I915_EXEC_DEFAULT selecting engine[0]
+ * and upwards. Slots 0...N are filled in using the specified (class, instance).
+ * Use
+ *	engine_class: I915_ENGINE_CLASS_INVALID,
+ *	engine_instance: I915_ENGINE_CLASS_INVALID_NONE
+ * to specify a gap in the array that can be filled in later, e.g. by a
+ * virtual engine used for load balancing.
+ *
+ * Setting the number of engines bound to the context to 0, by passing a zero
+ * sized argument, will revert back to default settings.
+ *
+ * See struct i915_context_param_engines.
+ *
+ * Extensions:
+ *   i915_context_engines_load_balance (I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE)
+ *   i915_context_engines_bond (I915_CONTEXT_ENGINES_EXT_BOND)
+ *   i915_context_engines_parallel_submit (I915_CONTEXT_ENGINES_EXT_PARALLEL_SUBMIT)
+ */
+#define I915_CONTEXT_PARAM_ENGINES	0xa
+
+/*
+ * I915_CONTEXT_PARAM_PERSISTENCE:
+ *
+ * Allow the context and active rendering to survive the process until
+ * completion. Persistence allows fire-and-forget clients to queue up a
+ * bunch of work, hand the output over to a display server and then quit.
+ * If the context is marked as not persistent, upon closing (either via
+ * an explicit DRM_I915_GEM_CONTEXT_DESTROY or implicitly from file closure
+ * or process termination), the context and any outstanding requests will be
+ * cancelled (and exported fences for cancelled requests marked as -EIO).
+ *
+ * By default, new contexts allow persistence.
+ */
+#define I915_CONTEXT_PARAM_PERSISTENCE	0xb
+
+/* This API has been removed.  On the off chance someone somewhere has
+ * attempted to use it, never re-use this context param number.
+ */
+#define I915_CONTEXT_PARAM_RINGSIZE	0xc
+
+/*
+ * I915_CONTEXT_PARAM_PROTECTED_CONTENT:
+ *
+ * Mark that the context makes use of protected content, which will result
+ * in the context being invalidated when the protected content session is.
+ * Given that the protected content session is killed on suspend, the device
+ * is kept awake for the lifetime of a protected context, so the user should
+ * make sure to dispose of them once done.
+ * This flag can only be set at context creation time and, when set to true,
+ * must be preceded by an explicit setting of I915_CONTEXT_PARAM_RECOVERABLE
+ * to false. This flag can't be set to true in conjunction with setting the
+ * I915_CONTEXT_PARAM_BANNABLE flag to false. Creation example:
+ *
+ * .. code-block:: C
+ *
+ *	struct drm_i915_gem_context_create_ext_setparam p_protected = {
+ *		.base = {
+ *			.name = I915_CONTEXT_CREATE_EXT_SETPARAM,
+ *		},
+ *		.param = {
+ *			.param = I915_CONTEXT_PARAM_PROTECTED_CONTENT,
+ *			.value = 1,
+ *		}
+ *	};
+ *	struct drm_i915_gem_context_create_ext_setparam p_norecover = {
+ *		.base = {
+ *			.name = I915_CONTEXT_CREATE_EXT_SETPARAM,
+ *			.next_extension = to_user_pointer(&p_protected),
+ *		},
+ *		.param = {
+ *			.param = I915_CONTEXT_PARAM_RECOVERABLE,
+ *			.value = 0,
+ *		}
+ *	};
+ *	struct drm_i915_gem_context_create_ext create = {
+ *		.flags = I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS,
+ *		.extensions = to_user_pointer(&p_norecover);
+ *	};
+ *
+ *	ctx_id = gem_context_create_ext(drm_fd, &create);
+ *
+ * In addition to the normal failure cases, setting this flag during context
+ * creation can result in the following errors:
+ *
+ * -ENODEV: feature not available
+ * -EPERM: trying to mark a recoverable or not bannable context as protected
+ */
+#define I915_CONTEXT_PARAM_PROTECTED_CONTENT    0xd
+/* Must be kept compact -- no holes and well documented */
+
+	/** @value: Context parameter value to be set or queried */
+	__u64 value;
+};
+
+/*
+ * Context SSEU programming
+ *
+ * It may be necessary for either functional or performance reason to configure
+ * a context to run with a reduced number of SSEU (where SSEU stands for Slice/
+ * Sub-slice/EU).
+ *
+ * This is done by configuring SSEU configuration using the below
+ * @struct drm_i915_gem_context_param_sseu for every supported engine which
+ * userspace intends to use.
+ *
+ * Not all GPUs or engines support this functionality in which case an error
+ * code -ENODEV will be returned.
+ *
+ * Also, flexibility of possible SSEU configuration permutations varies between
+ * GPU generations and software imposed limitations. Requesting such a
+ * combination will return an error code of -EINVAL.
+ *
+ * NOTE: When perf/OA is active the context's SSEU configuration is ignored in
+ * favour of a single global setting.
+ */
+struct drm_i915_gem_context_param_sseu {
+	/*
+	 * Engine class & instance to be configured or queried.
+	 */
+	struct i915_engine_class_instance engine;
+
+	/*
+	 * Unknown flags must be cleared to zero.
+	 */
+	__u32 flags;
+#define I915_CONTEXT_SSEU_FLAG_ENGINE_INDEX (1u << 0)
+
+	/*
+	 * Mask of slices to enable for the context. Valid values are a subset
+	 * of the bitmask value returned for I915_PARAM_SLICE_MASK.
+	 */
+	__u64 slice_mask;
+
+	/*
+	 * Mask of subslices to enable for the context. Valid values are a
+	 * subset of the bitmask value return by I915_PARAM_SUBSLICE_MASK.
+	 */
+	__u64 subslice_mask;
+
+	/*
+	 * Minimum/Maximum number of EUs to enable per subslice for the
+	 * context. min_eus_per_subslice must be inferior or equal to
+	 * max_eus_per_subslice.
+	 */
+	__u16 min_eus_per_subslice;
+	__u16 max_eus_per_subslice;
+
+	/*
+	 * Unused for now. Must be cleared to zero.
+	 */
+	__u32 rsvd;
+};
+
+/**
+ * DOC: Virtual Engine uAPI
+ *
+ * Virtual engine is a concept where userspace is able to configure a set of
+ * physical engines, submit a batch buffer, and let the driver execute it on any
+ * engine from the set as it sees fit.
+ *
+ * This is primarily useful on parts which have multiple instances of a same
+ * class engine, like for example GT3+ Skylake parts with their two VCS engines.
+ *
+ * For instance userspace can enumerate all engines of a certain class using the
+ * previously described `Engine Discovery uAPI`_. After that userspace can
+ * create a GEM context with a placeholder slot for the virtual engine (using
+ * `I915_ENGINE_CLASS_INVALID` and `I915_ENGINE_CLASS_INVALID_NONE` for class
+ * and instance respectively) and finally using the
+ * `I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE` extension place a virtual engine in
+ * the same reserved slot.
+ *
+ * Example of creating a virtual engine and submitting a batch buffer to it:
+ *
+ * .. code-block:: C
+ *
+ * 	I915_DEFINE_CONTEXT_ENGINES_LOAD_BALANCE(virtual, 2) = {
+ * 		.base.name = I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE,
+ * 		.engine_index = 0, // Place this virtual engine into engine map slot 0
+ * 		.num_siblings = 2,
+ * 		.engines = { { I915_ENGINE_CLASS_VIDEO, 0 },
+ * 			     { I915_ENGINE_CLASS_VIDEO, 1 }, },
+ * 	};
+ * 	I915_DEFINE_CONTEXT_PARAM_ENGINES(engines, 1) = {
+ * 		.engines = { { I915_ENGINE_CLASS_INVALID,
+ * 			       I915_ENGINE_CLASS_INVALID_NONE } },
+ * 		.extensions = to_user_pointer(&virtual), // Chains after load_balance extension
+ * 	};
+ * 	struct drm_i915_gem_context_create_ext_setparam p_engines = {
+ * 		.base = {
+ * 			.name = I915_CONTEXT_CREATE_EXT_SETPARAM,
+ * 		},
+ * 		.param = {
+ * 			.param = I915_CONTEXT_PARAM_ENGINES,
+ * 			.value = to_user_pointer(&engines),
+ * 			.size = sizeof(engines),
+ * 		},
+ * 	};
+ * 	struct drm_i915_gem_context_create_ext create = {
+ * 		.flags = I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS,
+ * 		.extensions = to_user_pointer(&p_engines);
+ * 	};
+ *
+ * 	ctx_id = gem_context_create_ext(drm_fd, &create);
+ *
+ * 	// Now we have created a GEM context with its engine map containing a
+ * 	// single virtual engine. Submissions to this slot can go either to
+ * 	// vcs0 or vcs1, depending on the load balancing algorithm used inside
+ * 	// the driver. The load balancing is dynamic from one batch buffer to
+ * 	// another and transparent to userspace.
+ *
+ * 	...
+ * 	execbuf.rsvd1 = ctx_id;
+ * 	execbuf.flags = 0; // Submits to index 0 which is the virtual engine
+ * 	gem_execbuf(drm_fd, &execbuf);
+ */
+
+/*
+ * i915_context_engines_load_balance:
+ *
+ * Enable load balancing across this set of engines.
+ *
+ * Into the I915_EXEC_DEFAULT slot [0], a virtual engine is created that when
+ * used will proxy the execbuffer request onto one of the set of engines
+ * in such a way as to distribute the load evenly across the set.
+ *
+ * The set of engines must be compatible (e.g. the same HW class) as they
+ * will share the same logical GPU context and ring.
+ *
+ * To intermix rendering with the virtual engine and direct rendering onto
+ * the backing engines (bypassing the load balancing proxy), the context must
+ * be defined to use a single timeline for all engines.
+ */
+struct i915_context_engines_load_balance {
+	struct i915_user_extension base;
+
+	__u16 engine_index;
+	__u16 num_siblings;
+	__u32 flags; /* all undefined flags must be zero */
+
+	__u64 mbz64; /* reserved for future use; must be zero */
+
+	struct i915_engine_class_instance engines[];
+} __attribute__((packed));
+
+#define I915_DEFINE_CONTEXT_ENGINES_LOAD_BALANCE(name__, N__) struct { \
+	struct i915_user_extension base; \
+	__u16 engine_index; \
+	__u16 num_siblings; \
+	__u32 flags; \
+	__u64 mbz64; \
+	struct i915_engine_class_instance engines[N__]; \
+} __attribute__((packed)) name__
+
+/*
+ * i915_context_engines_bond:
+ *
+ * Constructed bonded pairs for execution within a virtual engine.
+ *
+ * All engines are equal, but some are more equal than others. Given
+ * the distribution of resources in the HW, it may be preferable to run
+ * a request on a given subset of engines in parallel to a request on a
+ * specific engine. We enable this selection of engines within a virtual
+ * engine by specifying bonding pairs, for any given master engine we will
+ * only execute on one of the corresponding siblings within the virtual engine.
+ *
+ * To execute a request in parallel on the master engine and a sibling requires
+ * coordination with a I915_EXEC_FENCE_SUBMIT.
+ */
+struct i915_context_engines_bond {
+	struct i915_user_extension base;
+
+	struct i915_engine_class_instance master;
+
+	__u16 virtual_index; /* index of virtual engine in ctx->engines[] */
+	__u16 num_bonds;
+
+	__u64 flags; /* all undefined flags must be zero */
+	__u64 mbz64[4]; /* reserved for future use; must be zero */
+
+	struct i915_engine_class_instance engines[];
+} __attribute__((packed));
+
+#define I915_DEFINE_CONTEXT_ENGINES_BOND(name__, N__) struct { \
+	struct i915_user_extension base; \
+	struct i915_engine_class_instance master; \
+	__u16 virtual_index; \
+	__u16 num_bonds; \
+	__u64 flags; \
+	__u64 mbz64[4]; \
+	struct i915_engine_class_instance engines[N__]; \
+} __attribute__((packed)) name__
+
+/**
+ * struct i915_context_engines_parallel_submit - Configure engine for
+ * parallel submission.
+ *
+ * Setup a slot in the context engine map to allow multiple BBs to be submitted
+ * in a single execbuf IOCTL. Those BBs will then be scheduled to run on the GPU
+ * in parallel. Multiple hardware contexts are created internally in the i915 to
+ * run these BBs. Once a slot is configured for N BBs only N BBs can be
+ * submitted in each execbuf IOCTL and this is implicit behavior e.g. The user
+ * doesn't tell the execbuf IOCTL there are N BBs, the execbuf IOCTL knows how
+ * many BBs there are based on the slot's configuration. The N BBs are the last
+ * N buffer objects or first N if I915_EXEC_BATCH_FIRST is set.
+ *
+ * The default placement behavior is to create implicit bonds between each
+ * context if each context maps to more than 1 physical engine (e.g. context is
+ * a virtual engine). Also we only allow contexts of same engine class and these
+ * contexts must be in logically contiguous order. Examples of the placement
+ * behavior are described below. Lastly, the default is to not allow BBs to be
+ * preempted mid-batch. Rather insert coordinated preemption points on all
+ * hardware contexts between each set of BBs. Flags could be added in the future
+ * to change both of these default behaviors.
+ *
+ * Returns -EINVAL if hardware context placement configuration is invalid or if
+ * the placement configuration isn't supported on the platform / submission
+ * interface.
+ * Returns -ENODEV if extension isn't supported on the platform / submission
+ * interface.
+ *
+ * .. code-block:: none
+ *
+ *	Examples syntax:
+ *	CS[X] = generic engine of same class, logical instance X
+ *	INVALID = I915_ENGINE_CLASS_INVALID, I915_ENGINE_CLASS_INVALID_NONE
+ *
+ *	Example 1 pseudo code:
+ *	set_engines(INVALID)
+ *	set_parallel(engine_index=0, width=2, num_siblings=1,
+ *		     engines=CS[0],CS[1])
+ *
+ *	Results in the following valid placement:
+ *	CS[0], CS[1]
+ *
+ *	Example 2 pseudo code:
+ *	set_engines(INVALID)
+ *	set_parallel(engine_index=0, width=2, num_siblings=2,
+ *		     engines=CS[0],CS[2],CS[1],CS[3])
+ *
+ *	Results in the following valid placements:
+ *	CS[0], CS[1]
+ *	CS[2], CS[3]
+ *
+ *	This can be thought of as two virtual engines, each containing two
+ *	engines thereby making a 2D array. However, there are bonds tying the
+ *	entries together and placing restrictions on how they can be scheduled.
+ *	Specifically, the scheduler can choose only vertical columns from the 2D
+ *	array. That is, CS[0] is bonded to CS[1] and CS[2] to CS[3]. So if the
+ *	scheduler wants to submit to CS[0], it must also choose CS[1] and vice
+ *	versa. Same for CS[2] requires also using CS[3].
+ *	VE[0] = CS[0], CS[2]
+ *	VE[1] = CS[1], CS[3]
+ *
+ *	Example 3 pseudo code:
+ *	set_engines(INVALID)
+ *	set_parallel(engine_index=0, width=2, num_siblings=2,
+ *		     engines=CS[0],CS[1],CS[1],CS[3])
+ *
+ *	Results in the following valid and invalid placements:
+ *	CS[0], CS[1]
+ *	CS[1], CS[3] - Not logically contiguous, return -EINVAL
+ */
+struct i915_context_engines_parallel_submit {
+	/**
+	 * @base: base user extension.
+	 */
+	struct i915_user_extension base;
+
+	/**
+	 * @engine_index: slot for parallel engine
+	 */
+	__u16 engine_index;
+
+	/**
+	 * @width: number of contexts per parallel engine or in other words the
+	 * number of batches in each submission
+	 */
+	__u16 width;
+
+	/**
+	 * @num_siblings: number of siblings per context or in other words the
+	 * number of possible placements for each submission
+	 */
+	__u16 num_siblings;
+
+	/**
+	 * @mbz16: reserved for future use; must be zero
+	 */
+	__u16 mbz16;
+
+	/**
+	 * @flags: all undefined flags must be zero, currently not defined flags
+	 */
+	__u64 flags;
+
+	/**
+	 * @mbz64: reserved for future use; must be zero
+	 */
+	__u64 mbz64[3];
+
+	/**
+	 * @engines: 2-d array of engine instances to configure parallel engine
+	 *
+	 * length = width (i) * num_siblings (j)
+	 * index = j + i * num_siblings
+	 */
+	struct i915_engine_class_instance engines[];
+
+} __attribute__((packed));
+
+#define I915_DEFINE_CONTEXT_ENGINES_PARALLEL_SUBMIT(name__, N__) struct { \
+	struct i915_user_extension base; \
+	__u16 engine_index; \
+	__u16 width; \
+	__u16 num_siblings; \
+	__u16 mbz16; \
+	__u64 flags; \
+	__u64 mbz64[3]; \
+	struct i915_engine_class_instance engines[N__]; \
+} __attribute__((packed)) name__
+
+/**
+ * DOC: Context Engine Map uAPI
+ *
+ * Context engine map is a new way of addressing engines when submitting batch-
+ * buffers, replacing the existing way of using identifiers like `I915_EXEC_BLT`
+ * inside the flags field of `struct drm_i915_gem_execbuffer2`.
+ *
+ * To use it created GEM contexts need to be configured with a list of engines
+ * the user is intending to submit to. This is accomplished using the
+ * `I915_CONTEXT_PARAM_ENGINES` parameter and `struct
+ * i915_context_param_engines`.
+ *
+ * For such contexts the `I915_EXEC_RING_MASK` field becomes an index into the
+ * configured map.
+ *
+ * Example of creating such context and submitting against it:
+ *
+ * .. code-block:: C
+ *
+ * 	I915_DEFINE_CONTEXT_PARAM_ENGINES(engines, 2) = {
+ * 		.engines = { { I915_ENGINE_CLASS_RENDER, 0 },
+ * 			     { I915_ENGINE_CLASS_COPY, 0 } }
+ * 	};
+ * 	struct drm_i915_gem_context_create_ext_setparam p_engines = {
+ * 		.base = {
+ * 			.name = I915_CONTEXT_CREATE_EXT_SETPARAM,
+ * 		},
+ * 		.param = {
+ * 			.param = I915_CONTEXT_PARAM_ENGINES,
+ * 			.value = to_user_pointer(&engines),
+ * 			.size = sizeof(engines),
+ * 		},
+ * 	};
+ * 	struct drm_i915_gem_context_create_ext create = {
+ * 		.flags = I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS,
+ * 		.extensions = to_user_pointer(&p_engines);
+ * 	};
+ *
+ * 	ctx_id = gem_context_create_ext(drm_fd, &create);
+ *
+ * 	// We have now created a GEM context with two engines in the map:
+ * 	// Index 0 points to rcs0 while index 1 points to bcs0. Other engines
+ * 	// will not be accessible from this context.
+ *
+ * 	...
+ * 	execbuf.rsvd1 = ctx_id;
+ * 	execbuf.flags = 0; // Submits to index 0, which is rcs0 for this context
+ * 	gem_execbuf(drm_fd, &execbuf);
+ *
+ * 	...
+ * 	execbuf.rsvd1 = ctx_id;
+ * 	execbuf.flags = 1; // Submits to index 0, which is bcs0 for this context
+ * 	gem_execbuf(drm_fd, &execbuf);
+ */
+
+struct i915_context_param_engines {
+	__u64 extensions; /* linked chain of extension blocks, 0 terminates */
+#define I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE 0 /* see i915_context_engines_load_balance */
+#define I915_CONTEXT_ENGINES_EXT_BOND 1 /* see i915_context_engines_bond */
+#define I915_CONTEXT_ENGINES_EXT_PARALLEL_SUBMIT 2 /* see i915_context_engines_parallel_submit */
+	struct i915_engine_class_instance engines[0];
+} __attribute__((packed));
+
+#define I915_DEFINE_CONTEXT_PARAM_ENGINES(name__, N__) struct { \
+	__u64 extensions; \
+	struct i915_engine_class_instance engines[N__]; \
+} __attribute__((packed)) name__
+
+/**
+ * struct drm_i915_gem_context_create_ext_setparam - Context parameter
+ * to set or query during context creation.
+ */
+struct drm_i915_gem_context_create_ext_setparam {
+	/** @base: Extension link. See struct i915_user_extension. */
+	struct i915_user_extension base;
+
+	/**
+	 * @param: Context parameter to set or query.
+	 * See struct drm_i915_gem_context_param.
+	 */
+	struct drm_i915_gem_context_param param;
+};
+
+struct drm_i915_gem_context_destroy {
+	__u32 ctx_id;
+	__u32 pad;
+};
+
+/**
+ * struct drm_i915_gem_vm_control - Structure to create or destroy VM.
+ *
+ * DRM_I915_GEM_VM_CREATE -
+ *
+ * Create a new virtual memory address space (ppGTT) for use within a context
+ * on the same file. Extensions can be provided to configure exactly how the
+ * address space is setup upon creation.
+ *
+ * The id of new VM (bound to the fd) for use with I915_CONTEXT_PARAM_VM is
+ * returned in the outparam @id.
+ *
+ * An extension chain maybe provided, starting with @extensions, and terminated
+ * by the @next_extension being 0. Currently, no extensions are defined.
+ *
+ * DRM_I915_GEM_VM_DESTROY -
+ *
+ * Destroys a previously created VM id, specified in @vm_id.
+ *
+ * No extensions or flags are allowed currently, and so must be zero.
+ */
+struct drm_i915_gem_vm_control {
+	/** @extensions: Zero-terminated chain of extensions. */
+	__u64 extensions;
+
+	/** @flags: reserved for future usage, currently MBZ */
+	__u32 flags;
+
+	/** @vm_id: Id of the VM created or to be destroyed */
+	__u32 vm_id;
+};
+
+struct drm_i915_reg_read {
+	/*
+	 * Register offset.
+	 * For 64bit wide registers where the upper 32bits don't immediately
+	 * follow the lower 32bits, the offset of the lower 32bits must
+	 * be specified
+	 */
+	__u64 offset;
+#define I915_REG_READ_8B_WA (1ul << 0)
+
+	__u64 val; /* Return value */
+};
+
+/* Known registers:
+ *
+ * Render engine timestamp - 0x2358 + 64bit - gen7+
+ * - Note this register returns an invalid value if using the default
+ *   single instruction 8byte read, in order to workaround that pass
+ *   flag I915_REG_READ_8B_WA in offset field.
+ *
+ */
+
+struct drm_i915_reset_stats {
+	__u32 ctx_id;
+	__u32 flags;
+
+	/* All resets since boot/module reload, for all contexts */
+	__u32 reset_count;
+
+	/* Number of batches lost when active in GPU, for this context */
+	__u32 batch_active;
+
+	/* Number of batches lost pending for execution, for this context */
+	__u32 batch_pending;
+
+	__u32 pad;
+};
+
+/**
+ * struct drm_i915_gem_userptr - Create GEM object from user allocated memory.
+ *
+ * Userptr objects have several restrictions on what ioctls can be used with the
+ * object handle.
+ */
+struct drm_i915_gem_userptr {
+	/**
+	 * @user_ptr: The pointer to the allocated memory.
+	 *
+	 * Needs to be aligned to PAGE_SIZE.
+	 */
+	__u64 user_ptr;
+
+	/**
+	 * @user_size:
+	 *
+	 * The size in bytes for the allocated memory. This will also become the
+	 * object size.
+	 *
+	 * Needs to be aligned to PAGE_SIZE, and should be at least PAGE_SIZE,
+	 * or larger.
+	 */
+	__u64 user_size;
+
+	/**
+	 * @flags:
+	 *
+	 * Supported flags:
+	 *
+	 * I915_USERPTR_READ_ONLY:
+	 *
+	 * Mark the object as readonly, this also means GPU access can only be
+	 * readonly. This is only supported on HW which supports readonly access
+	 * through the GTT. If the HW can't support readonly access, an error is
+	 * returned.
+	 *
+	 * I915_USERPTR_PROBE:
+	 *
+	 * Probe the provided @user_ptr range and validate that the @user_ptr is
+	 * indeed pointing to normal memory and that the range is also valid.
+	 * For example if some garbage address is given to the kernel, then this
+	 * should complain.
+	 *
+	 * Returns -EFAULT if the probe failed.
+	 *
+	 * Note that this doesn't populate the backing pages, and also doesn't
+	 * guarantee that the object will remain valid when the object is
+	 * eventually used.
+	 *
+	 * The kernel supports this feature if I915_PARAM_HAS_USERPTR_PROBE
+	 * returns a non-zero value.
+	 *
+	 * I915_USERPTR_UNSYNCHRONIZED:
+	 *
+	 * NOT USED. Setting this flag will result in an error.
+	 */
+	__u32 flags;
+#define I915_USERPTR_READ_ONLY 0x1
+#define I915_USERPTR_PROBE 0x2
+#define I915_USERPTR_UNSYNCHRONIZED 0x80000000
+	/**
+	 * @handle: Returned handle for the object.
+	 *
+	 * Object handles are nonzero.
+	 */
+	__u32 handle;
+};
+
+enum drm_i915_oa_format {
+	I915_OA_FORMAT_A13 = 1,	    /* HSW only */
+	I915_OA_FORMAT_A29,	    /* HSW only */
+	I915_OA_FORMAT_A13_B8_C8,   /* HSW only */
+	I915_OA_FORMAT_B4_C8,	    /* HSW only */
+	I915_OA_FORMAT_A45_B8_C8,   /* HSW only */
+	I915_OA_FORMAT_B4_C8_A16,   /* HSW only */
+	I915_OA_FORMAT_C4_B8,	    /* HSW+ */
+
+	/* Gen8+ */
+	I915_OA_FORMAT_A12,
+	I915_OA_FORMAT_A12_B8_C8,
+	I915_OA_FORMAT_A32u40_A4u32_B8_C8,
+
+	I915_OA_FORMAT_MAX	    /* non-ABI */
+};
+
+enum drm_i915_perf_property_id {
+	/**
+	 * Open the stream for a specific context handle (as used with
+	 * execbuffer2). A stream opened for a specific context this way
+	 * won't typically require root privileges.
+	 *
+	 * This property is available in perf revision 1.
+	 */
+	DRM_I915_PERF_PROP_CTX_HANDLE = 1,
+
+	/**
+	 * A value of 1 requests the inclusion of raw OA unit reports as
+	 * part of stream samples.
+	 *
+	 * This property is available in perf revision 1.
+	 */
+	DRM_I915_PERF_PROP_SAMPLE_OA,
+
+	/**
+	 * The value specifies which set of OA unit metrics should be
+	 * configured, defining the contents of any OA unit reports.
+	 *
+	 * This property is available in perf revision 1.
+	 */
+	DRM_I915_PERF_PROP_OA_METRICS_SET,
+
+	/**
+	 * The value specifies the size and layout of OA unit reports.
+	 *
+	 * This property is available in perf revision 1.
+	 */
+	DRM_I915_PERF_PROP_OA_FORMAT,
+
+	/**
+	 * Specifying this property implicitly requests periodic OA unit
+	 * sampling and (at least on Haswell) the sampling frequency is derived
+	 * from this exponent as follows:
+	 *
+	 *   80ns * 2^(period_exponent + 1)
+	 *
+	 * This property is available in perf revision 1.
+	 */
+	DRM_I915_PERF_PROP_OA_EXPONENT,
+
+	/**
+	 * Specifying this property is only valid when specify a context to
+	 * filter with DRM_I915_PERF_PROP_CTX_HANDLE. Specifying this property
+	 * will hold preemption of the particular context we want to gather
+	 * performance data about. The execbuf2 submissions must include a
+	 * drm_i915_gem_execbuffer_ext_perf parameter for this to apply.
+	 *
+	 * This property is available in perf revision 3.
+	 */
+	DRM_I915_PERF_PROP_HOLD_PREEMPTION,
+
+	/**
+	 * Specifying this pins all contexts to the specified SSEU power
+	 * configuration for the duration of the recording.
+	 *
+	 * This parameter's value is a pointer to a struct
+	 * drm_i915_gem_context_param_sseu.
+	 *
+	 * This property is available in perf revision 4.
+	 */
+	DRM_I915_PERF_PROP_GLOBAL_SSEU,
+
+	/**
+	 * This optional parameter specifies the timer interval in nanoseconds
+	 * at which the i915 driver will check the OA buffer for available data.
+	 * Minimum allowed value is 100 microseconds. A default value is used by
+	 * the driver if this parameter is not specified. Note that larger timer
+	 * values will reduce cpu consumption during OA perf captures. However,
+	 * excessively large values would potentially result in OA buffer
+	 * overwrites as captures reach end of the OA buffer.
+	 *
+	 * This property is available in perf revision 5.
+	 */
+	DRM_I915_PERF_PROP_POLL_OA_PERIOD,
+
+	DRM_I915_PERF_PROP_MAX /* non-ABI */
+};
+
+struct drm_i915_perf_open_param {
+	__u32 flags;
+#define I915_PERF_FLAG_FD_CLOEXEC	(1<<0)
+#define I915_PERF_FLAG_FD_NONBLOCK	(1<<1)
+#define I915_PERF_FLAG_DISABLED		(1<<2)
+
+	/** The number of u64 (id, value) pairs */
+	__u32 num_properties;
+
+	/**
+	 * Pointer to array of u64 (id, value) pairs configuring the stream
+	 * to open.
+	 */
+	__u64 properties_ptr;
+};
+
+/*
+ * Enable data capture for a stream that was either opened in a disabled state
+ * via I915_PERF_FLAG_DISABLED or was later disabled via
+ * I915_PERF_IOCTL_DISABLE.
+ *
+ * It is intended to be cheaper to disable and enable a stream than it may be
+ * to close and re-open a stream with the same configuration.
+ *
+ * It's undefined whether any pending data for the stream will be lost.
+ *
+ * This ioctl is available in perf revision 1.
+ */
+#define I915_PERF_IOCTL_ENABLE	_IO('i', 0x0)
+
+/*
+ * Disable data capture for a stream.
+ *
+ * It is an error to try and read a stream that is disabled.
+ *
+ * This ioctl is available in perf revision 1.
+ */
+#define I915_PERF_IOCTL_DISABLE	_IO('i', 0x1)
+
+/*
+ * Change metrics_set captured by a stream.
+ *
+ * If the stream is bound to a specific context, the configuration change
+ * will performed __inline__ with that context such that it takes effect before
+ * the next execbuf submission.
+ *
+ * Returns the previously bound metrics set id, or a negative error code.
+ *
+ * This ioctl is available in perf revision 2.
+ */
+#define I915_PERF_IOCTL_CONFIG	_IO('i', 0x2)
+
+/*
+ * Common to all i915 perf records
+ */
+struct drm_i915_perf_record_header {
+	__u32 type;
+	__u16 pad;
+	__u16 size;
+};
+
+enum drm_i915_perf_record_type {
+
+	/**
+	 * Samples are the work horse record type whose contents are extensible
+	 * and defined when opening an i915 perf stream based on the given
+	 * properties.
+	 *
+	 * Boolean properties following the naming convention
+	 * DRM_I915_PERF_SAMPLE_xyz_PROP request the inclusion of 'xyz' data in
+	 * every sample.
+	 *
+	 * The order of these sample properties given by userspace has no
+	 * affect on the ordering of data within a sample. The order is
+	 * documented here.
+	 *
+	 * struct {
+	 *     struct drm_i915_perf_record_header header;
+	 *
+	 *     { u32 oa_report[]; } && DRM_I915_PERF_PROP_SAMPLE_OA
+	 * };
+	 */
+	DRM_I915_PERF_RECORD_SAMPLE = 1,
+
+	/*
+	 * Indicates that one or more OA reports were not written by the
+	 * hardware. This can happen for example if an MI_REPORT_PERF_COUNT
+	 * command collides with periodic sampling - which would be more likely
+	 * at higher sampling frequencies.
+	 */
+	DRM_I915_PERF_RECORD_OA_REPORT_LOST = 2,
+
+	/**
+	 * An error occurred that resulted in all pending OA reports being lost.
+	 */
+	DRM_I915_PERF_RECORD_OA_BUFFER_LOST = 3,
+
+	DRM_I915_PERF_RECORD_MAX /* non-ABI */
+};
+
+/**
+ * struct drm_i915_perf_oa_config
+ *
+ * Structure to upload perf dynamic configuration into the kernel.
+ */
+struct drm_i915_perf_oa_config {
+	/**
+	 * @uuid:
+	 *
+	 * String formatted like "%\08x-%\04x-%\04x-%\04x-%\012x"
+	 */
+	char uuid[36];
+
+	/**
+	 * @n_mux_regs:
+	 *
+	 * Number of mux regs in &mux_regs_ptr.
+	 */
+	__u32 n_mux_regs;
+
+	/**
+	 * @n_boolean_regs:
+	 *
+	 * Number of boolean regs in &boolean_regs_ptr.
+	 */
+	__u32 n_boolean_regs;
+
+	/**
+	 * @n_flex_regs:
+	 *
+	 * Number of flex regs in &flex_regs_ptr.
+	 */
+	__u32 n_flex_regs;
+
+	/**
+	 * @mux_regs_ptr:
+	 *
+	 * Pointer to tuples of u32 values (register address, value) for mux
+	 * registers.  Expected length of buffer is (2 * sizeof(u32) *
+	 * &n_mux_regs).
+	 */
+	__u64 mux_regs_ptr;
+
+	/**
+	 * @boolean_regs_ptr:
+	 *
+	 * Pointer to tuples of u32 values (register address, value) for mux
+	 * registers.  Expected length of buffer is (2 * sizeof(u32) *
+	 * &n_boolean_regs).
+	 */
+	__u64 boolean_regs_ptr;
+
+	/**
+	 * @flex_regs_ptr:
+	 *
+	 * Pointer to tuples of u32 values (register address, value) for mux
+	 * registers.  Expected length of buffer is (2 * sizeof(u32) *
+	 * &n_flex_regs).
+	 */
+	__u64 flex_regs_ptr;
+};
+
+/**
+ * struct drm_i915_query_item - An individual query for the kernel to process.
+ *
+ * The behaviour is determined by the @query_id. Note that exactly what
+ * @data_ptr is also depends on the specific @query_id.
+ */
+struct drm_i915_query_item {
+	/**
+	 * @query_id:
+	 *
+	 * The id for this query.  Currently accepted query IDs are:
+	 *  - %DRM_I915_QUERY_TOPOLOGY_INFO (see struct drm_i915_query_topology_info)
+	 *  - %DRM_I915_QUERY_ENGINE_INFO (see struct drm_i915_engine_info)
+	 *  - %DRM_I915_QUERY_PERF_CONFIG (see struct drm_i915_query_perf_config)
+	 *  - %DRM_I915_QUERY_MEMORY_REGIONS (see struct drm_i915_query_memory_regions)
+	 *  - %DRM_I915_QUERY_HWCONFIG_BLOB (see `GuC HWCONFIG blob uAPI`)
+	 *  - %DRM_I915_QUERY_GEOMETRY_SUBSLICES (see struct drm_i915_query_topology_info)
+	 */
+	__u64 query_id;
+#define DRM_I915_QUERY_TOPOLOGY_INFO		1
+#define DRM_I915_QUERY_ENGINE_INFO		2
+#define DRM_I915_QUERY_PERF_CONFIG		3
+#define DRM_I915_QUERY_MEMORY_REGIONS		4
+#define DRM_I915_QUERY_HWCONFIG_BLOB		5
+#define DRM_I915_QUERY_GEOMETRY_SUBSLICES	6
+/* Must be kept compact -- no holes and well documented */
+
+	/**
+	 * @length:
+	 *
+	 * When set to zero by userspace, this is filled with the size of the
+	 * data to be written at the @data_ptr pointer. The kernel sets this
+	 * value to a negative value to signal an error on a particular query
+	 * item.
+	 */
+	__s32 length;
+
+	/**
+	 * @flags:
+	 *
+	 * When &query_id == %DRM_I915_QUERY_TOPOLOGY_INFO, must be 0.
+	 *
+	 * When &query_id == %DRM_I915_QUERY_PERF_CONFIG, must be one of the
+	 * following:
+	 *
+	 *	- %DRM_I915_QUERY_PERF_CONFIG_LIST
+	 *      - %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID
+	 *      - %DRM_I915_QUERY_PERF_CONFIG_FOR_UUID
+	 *
+	 * When &query_id == %DRM_I915_QUERY_GEOMETRY_SUBSLICES must contain
+	 * a struct i915_engine_class_instance that references a render engine.
+	 */
+	__u32 flags;
+#define DRM_I915_QUERY_PERF_CONFIG_LIST          1
+#define DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID 2
+#define DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID   3
+
+	/**
+	 * @data_ptr:
+	 *
+	 * Data will be written at the location pointed by @data_ptr when the
+	 * value of @length matches the length of the data to be written by the
+	 * kernel.
+	 */
+	__u64 data_ptr;
+};
+
+/**
+ * struct drm_i915_query - Supply an array of struct drm_i915_query_item for the
+ * kernel to fill out.
+ *
+ * Note that this is generally a two step process for each struct
+ * drm_i915_query_item in the array:
+ *
+ * 1. Call the DRM_IOCTL_I915_QUERY, giving it our array of struct
+ *    drm_i915_query_item, with &drm_i915_query_item.length set to zero. The
+ *    kernel will then fill in the size, in bytes, which tells userspace how
+ *    memory it needs to allocate for the blob(say for an array of properties).
+ *
+ * 2. Next we call DRM_IOCTL_I915_QUERY again, this time with the
+ *    &drm_i915_query_item.data_ptr equal to our newly allocated blob. Note that
+ *    the &drm_i915_query_item.length should still be the same as what the
+ *    kernel previously set. At this point the kernel can fill in the blob.
+ *
+ * Note that for some query items it can make sense for userspace to just pass
+ * in a buffer/blob equal to or larger than the required size. In this case only
+ * a single ioctl call is needed. For some smaller query items this can work
+ * quite well.
+ *
+ */
+struct drm_i915_query {
+	/** @num_items: The number of elements in the @items_ptr array */
+	__u32 num_items;
+
+	/**
+	 * @flags: Unused for now. Must be cleared to zero.
+	 */
+	__u32 flags;
+
+	/**
+	 * @items_ptr:
+	 *
+	 * Pointer to an array of struct drm_i915_query_item. The number of
+	 * array elements is @num_items.
+	 */
+	__u64 items_ptr;
+};
+
+/**
+ * struct drm_i915_query_topology_info
+ *
+ * Describes slice/subslice/EU information queried by
+ * %DRM_I915_QUERY_TOPOLOGY_INFO
+ */
+struct drm_i915_query_topology_info {
+	/**
+	 * @flags:
+	 *
+	 * Unused for now. Must be cleared to zero.
+	 */
+	__u16 flags;
+
+	/**
+	 * @max_slices:
+	 *
+	 * The number of bits used to express the slice mask.
+	 */
+	__u16 max_slices;
+
+	/**
+	 * @max_subslices:
+	 *
+	 * The number of bits used to express the subslice mask.
+	 */
+	__u16 max_subslices;
+
+	/**
+	 * @max_eus_per_subslice:
+	 *
+	 * The number of bits in the EU mask that correspond to a single
+	 * subslice's EUs.
+	 */
+	__u16 max_eus_per_subslice;
+
+	/**
+	 * @subslice_offset:
+	 *
+	 * Offset in data[] at which the subslice masks are stored.
+	 */
+	__u16 subslice_offset;
+
+	/**
+	 * @subslice_stride:
+	 *
+	 * Stride at which each of the subslice masks for each slice are
+	 * stored.
+	 */
+	__u16 subslice_stride;
+
+	/**
+	 * @eu_offset:
+	 *
+	 * Offset in data[] at which the EU masks are stored.
+	 */
+	__u16 eu_offset;
+
+	/**
+	 * @eu_stride:
+	 *
+	 * Stride at which each of the EU masks for each subslice are stored.
+	 */
+	__u16 eu_stride;
+
+	/**
+	 * @data:
+	 *
+	 * Contains 3 pieces of information :
+	 *
+	 * - The slice mask with one bit per slice telling whether a slice is
+	 *   available. The availability of slice X can be queried with the
+	 *   following formula :
+	 *
+	 *   .. code:: c
+	 *
+	 *      (data[X / 8] >> (X % 8)) & 1
+	 *
+	 *   Starting with Xe_HP platforms, Intel hardware no longer has
+	 *   traditional slices so i915 will always report a single slice
+	 *   (hardcoded slicemask = 0x1) which contains all of the platform's
+	 *   subslices.  I.e., the mask here does not reflect any of the newer
+	 *   hardware concepts such as "gslices" or "cslices" since userspace
+	 *   is capable of inferring those from the subslice mask.
+	 *
+	 * - The subslice mask for each slice with one bit per subslice telling
+	 *   whether a subslice is available.  Starting with Gen12 we use the
+	 *   term "subslice" to refer to what the hardware documentation
+	 *   describes as a "dual-subslices."  The availability of subslice Y
+	 *   in slice X can be queried with the following formula :
+	 *
+	 *   .. code:: c
+	 *
+	 *      (data[subslice_offset + X * subslice_stride + Y / 8] >> (Y % 8)) & 1
+	 *
+	 * - The EU mask for each subslice in each slice, with one bit per EU
+	 *   telling whether an EU is available. The availability of EU Z in
+	 *   subslice Y in slice X can be queried with the following formula :
+	 *
+	 *   .. code:: c
+	 *
+	 *      (data[eu_offset +
+	 *            (X * max_subslices + Y) * eu_stride +
+	 *            Z / 8
+	 *       ] >> (Z % 8)) & 1
+	 */
+	__u8 data[];
+};
+
+/**
+ * DOC: Engine Discovery uAPI
+ *
+ * Engine discovery uAPI is a way of enumerating physical engines present in a
+ * GPU associated with an open i915 DRM file descriptor. This supersedes the old
+ * way of using `DRM_IOCTL_I915_GETPARAM` and engine identifiers like
+ * `I915_PARAM_HAS_BLT`.
+ *
+ * The need for this interface came starting with Icelake and newer GPUs, which
+ * started to establish a pattern of having multiple engines of a same class,
+ * where not all instances were always completely functionally equivalent.
+ *
+ * Entry point for this uapi is `DRM_IOCTL_I915_QUERY` with the
+ * `DRM_I915_QUERY_ENGINE_INFO` as the queried item id.
+ *
+ * Example for getting the list of engines:
+ *
+ * .. code-block:: C
+ *
+ * 	struct drm_i915_query_engine_info *info;
+ * 	struct drm_i915_query_item item = {
+ * 		.query_id = DRM_I915_QUERY_ENGINE_INFO;
+ * 	};
+ * 	struct drm_i915_query query = {
+ * 		.num_items = 1,
+ * 		.items_ptr = (uintptr_t)&item,
+ * 	};
+ * 	int err, i;
+ *
+ * 	// First query the size of the blob we need, this needs to be large
+ * 	// enough to hold our array of engines. The kernel will fill out the
+ * 	// item.length for us, which is the number of bytes we need.
+ * 	//
+ * 	// Alternatively a large buffer can be allocated straight away enabling
+ * 	// querying in one pass, in which case item.length should contain the
+ * 	// length of the provided buffer.
+ * 	err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
+ * 	if (err) ...
+ *
+ * 	info = calloc(1, item.length);
+ * 	// Now that we allocated the required number of bytes, we call the ioctl
+ * 	// again, this time with the data_ptr pointing to our newly allocated
+ * 	// blob, which the kernel can then populate with info on all engines.
+ * 	item.data_ptr = (uintptr_t)&info,
+ *
+ * 	err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
+ * 	if (err) ...
+ *
+ * 	// We can now access each engine in the array
+ * 	for (i = 0; i < info->num_engines; i++) {
+ * 		struct drm_i915_engine_info einfo = info->engines[i];
+ * 		u16 class = einfo.engine.class;
+ * 		u16 instance = einfo.engine.instance;
+ * 		....
+ * 	}
+ *
+ * 	free(info);
+ *
+ * Each of the enumerated engines, apart from being defined by its class and
+ * instance (see `struct i915_engine_class_instance`), also can have flags and
+ * capabilities defined as documented in i915_drm.h.
+ *
+ * For instance video engines which support HEVC encoding will have the
+ * `I915_VIDEO_CLASS_CAPABILITY_HEVC` capability bit set.
+ *
+ * Engine discovery only fully comes to its own when combined with the new way
+ * of addressing engines when submitting batch buffers using contexts with
+ * engine maps configured.
+ */
+
+/**
+ * struct drm_i915_engine_info
+ *
+ * Describes one engine and it's capabilities as known to the driver.
+ */
+struct drm_i915_engine_info {
+	/** @engine: Engine class and instance. */
+	struct i915_engine_class_instance engine;
+
+	/** @rsvd0: Reserved field. */
+	__u32 rsvd0;
+
+	/** @flags: Engine flags. */
+	__u64 flags;
+#define I915_ENGINE_INFO_HAS_LOGICAL_INSTANCE		(1 << 0)
+
+	/** @capabilities: Capabilities of this engine. */
+	__u64 capabilities;
+#define I915_VIDEO_CLASS_CAPABILITY_HEVC		(1 << 0)
+#define I915_VIDEO_AND_ENHANCE_CLASS_CAPABILITY_SFC	(1 << 1)
+
+	/** @logical_instance: Logical instance of engine */
+	__u16 logical_instance;
+
+	/** @rsvd1: Reserved fields. */
+	__u16 rsvd1[3];
+	/** @rsvd2: Reserved fields. */
+	__u64 rsvd2[3];
+};
+
+/**
+ * struct drm_i915_query_engine_info
+ *
+ * Engine info query enumerates all engines known to the driver by filling in
+ * an array of struct drm_i915_engine_info structures.
+ */
+struct drm_i915_query_engine_info {
+	/** @num_engines: Number of struct drm_i915_engine_info structs following. */
+	__u32 num_engines;
+
+	/** @rsvd: MBZ */
+	__u32 rsvd[3];
+
+	/** @engines: Marker for drm_i915_engine_info structures. */
+	struct drm_i915_engine_info engines[];
+};
+
+/**
+ * struct drm_i915_query_perf_config
+ *
+ * Data written by the kernel with query %DRM_I915_QUERY_PERF_CONFIG and
+ * %DRM_I915_QUERY_GEOMETRY_SUBSLICES.
+ */
+struct drm_i915_query_perf_config {
+	union {
+		/**
+		 * @n_configs:
+		 *
+		 * When &drm_i915_query_item.flags ==
+		 * %DRM_I915_QUERY_PERF_CONFIG_LIST, i915 sets this fields to
+		 * the number of configurations available.
+		 */
+		__u64 n_configs;
+
+		/**
+		 * @config:
+		 *
+		 * When &drm_i915_query_item.flags ==
+		 * %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID, i915 will use the
+		 * value in this field as configuration identifier to decide
+		 * what data to write into config_ptr.
+		 */
+		__u64 config;
+
+		/**
+		 * @uuid:
+		 *
+		 * When &drm_i915_query_item.flags ==
+		 * %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID, i915 will use the
+		 * value in this field as configuration identifier to decide
+		 * what data to write into config_ptr.
+		 *
+		 * String formatted like "%08x-%04x-%04x-%04x-%012x"
+		 */
+		char uuid[36];
+	};
+
+	/**
+	 * @flags:
+	 *
+	 * Unused for now. Must be cleared to zero.
+	 */
+	__u32 flags;
+
+	/**
+	 * @data:
+	 *
+	 * When &drm_i915_query_item.flags == %DRM_I915_QUERY_PERF_CONFIG_LIST,
+	 * i915 will write an array of __u64 of configuration identifiers.
+	 *
+	 * When &drm_i915_query_item.flags == %DRM_I915_QUERY_PERF_CONFIG_DATA,
+	 * i915 will write a struct drm_i915_perf_oa_config. If the following
+	 * fields of struct drm_i915_perf_oa_config are not set to 0, i915 will
+	 * write into the associated pointers the values of submitted when the
+	 * configuration was created :
+	 *
+	 *  - &drm_i915_perf_oa_config.n_mux_regs
+	 *  - &drm_i915_perf_oa_config.n_boolean_regs
+	 *  - &drm_i915_perf_oa_config.n_flex_regs
+	 */
+	__u8 data[];
+};
+
+/**
+ * enum drm_i915_gem_memory_class - Supported memory classes
+ */
+enum drm_i915_gem_memory_class {
+	/** @I915_MEMORY_CLASS_SYSTEM: System memory */
+	I915_MEMORY_CLASS_SYSTEM = 0,
+	/** @I915_MEMORY_CLASS_DEVICE: Device local-memory */
+	I915_MEMORY_CLASS_DEVICE,
+};
+
+/**
+ * struct drm_i915_gem_memory_class_instance - Identify particular memory region
+ */
+struct drm_i915_gem_memory_class_instance {
+	/** @memory_class: See enum drm_i915_gem_memory_class */
+	__u16 memory_class;
+
+	/** @memory_instance: Which instance */
+	__u16 memory_instance;
+};
+
+/**
+ * struct drm_i915_memory_region_info - Describes one region as known to the
+ * driver.
+ *
+ * Note this is using both struct drm_i915_query_item and struct drm_i915_query.
+ * For this new query we are adding the new query id DRM_I915_QUERY_MEMORY_REGIONS
+ * at &drm_i915_query_item.query_id.
+ */
+struct drm_i915_memory_region_info {
+	/** @region: The class:instance pair encoding */
+	struct drm_i915_gem_memory_class_instance region;
+
+	/** @rsvd0: MBZ */
+	__u32 rsvd0;
+
+	/**
+	 * @probed_size: Memory probed by the driver
+	 *
+	 * Note that it should not be possible to ever encounter a zero value
+	 * here, also note that no current region type will ever return -1 here.
+	 * Although for future region types, this might be a possibility. The
+	 * same applies to the other size fields.
+	 */
+	__u64 probed_size;
+
+	/**
+	 * @unallocated_size: Estimate of memory remaining
+	 *
+	 * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable accounting.
+	 * Without this (or if this is an older kernel) the value here will
+	 * always equal the @probed_size. Note this is only currently tracked
+	 * for I915_MEMORY_CLASS_DEVICE regions (for other types the value here
+	 * will always equal the @probed_size).
+	 */
+	__u64 unallocated_size;
+
+	union {
+		/** @rsvd1: MBZ */
+		__u64 rsvd1[8];
+		struct {
+			/**
+			 * @probed_cpu_visible_size: Memory probed by the driver
+			 * that is CPU accessible.
+			 *
+			 * This will be always be <= @probed_size, and the
+			 * remainder (if there is any) will not be CPU
+			 * accessible.
+			 *
+			 * On systems without small BAR, the @probed_size will
+			 * always equal the @probed_cpu_visible_size, since all
+			 * of it will be CPU accessible.
+			 *
+			 * Note this is only tracked for
+			 * I915_MEMORY_CLASS_DEVICE regions (for other types the
+			 * value here will always equal the @probed_size).
+			 *
+			 * Note that if the value returned here is zero, then
+			 * this must be an old kernel which lacks the relevant
+			 * small-bar uAPI support (including
+			 * I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS), but on
+			 * such systems we should never actually end up with a
+			 * small BAR configuration, assuming we are able to load
+			 * the kernel module. Hence it should be safe to treat
+			 * this the same as when @probed_cpu_visible_size ==
+			 * @probed_size.
+			 */
+			__u64 probed_cpu_visible_size;
+
+			/**
+			 * @unallocated_cpu_visible_size: Estimate of CPU
+			 * visible memory remaining.
+			 *
+			 * Note this is only tracked for
+			 * I915_MEMORY_CLASS_DEVICE regions (for other types the
+			 * value here will always equal the
+			 * @probed_cpu_visible_size).
+			 *
+			 * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable
+			 * accounting.  Without this the value here will always
+			 * equal the @probed_cpu_visible_size. Note this is only
+			 * currently tracked for I915_MEMORY_CLASS_DEVICE
+			 * regions (for other types the value here will also
+			 * always equal the @probed_cpu_visible_size).
+			 *
+			 * If this is an older kernel the value here will be
+			 * zero, see also @probed_cpu_visible_size.
+			 */
+			__u64 unallocated_cpu_visible_size;
+		};
+	};
+};
+
+/**
+ * struct drm_i915_query_memory_regions
+ *
+ * The region info query enumerates all regions known to the driver by filling
+ * in an array of struct drm_i915_memory_region_info structures.
+ *
+ * Example for getting the list of supported regions:
+ *
+ * .. code-block:: C
+ *
+ *	struct drm_i915_query_memory_regions *info;
+ *	struct drm_i915_query_item item = {
+ *		.query_id = DRM_I915_QUERY_MEMORY_REGIONS;
+ *	};
+ *	struct drm_i915_query query = {
+ *		.num_items = 1,
+ *		.items_ptr = (uintptr_t)&item,
+ *	};
+ *	int err, i;
+ *
+ *	// First query the size of the blob we need, this needs to be large
+ *	// enough to hold our array of regions. The kernel will fill out the
+ *	// item.length for us, which is the number of bytes we need.
+ *	err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
+ *	if (err) ...
+ *
+ *	info = calloc(1, item.length);
+ *	// Now that we allocated the required number of bytes, we call the ioctl
+ *	// again, this time with the data_ptr pointing to our newly allocated
+ *	// blob, which the kernel can then populate with the all the region info.
+ *	item.data_ptr = (uintptr_t)&info,
+ *
+ *	err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
+ *	if (err) ...
+ *
+ *	// We can now access each region in the array
+ *	for (i = 0; i < info->num_regions; i++) {
+ *		struct drm_i915_memory_region_info mr = info->regions[i];
+ *		u16 class = mr.region.class;
+ *		u16 instance = mr.region.instance;
+ *
+ *		....
+ *	}
+ *
+ *	free(info);
+ */
+struct drm_i915_query_memory_regions {
+	/** @num_regions: Number of supported regions */
+	__u32 num_regions;
+
+	/** @rsvd: MBZ */
+	__u32 rsvd[3];
+
+	/** @regions: Info about each supported region */
+	struct drm_i915_memory_region_info regions[];
+};
+
+/**
+ * DOC: GuC HWCONFIG blob uAPI
+ *
+ * The GuC produces a blob with information about the current device.
+ * i915 reads this blob from GuC and makes it available via this uAPI.
+ *
+ * The format and meaning of the blob content are documented in the
+ * Programmer's Reference Manual.
+ */
+
+/**
+ * struct drm_i915_gem_create_ext - Existing gem_create behaviour, with added
+ * extension support using struct i915_user_extension.
+ *
+ * Note that new buffer flags should be added here, at least for the stuff that
+ * is immutable. Previously we would have two ioctls, one to create the object
+ * with gem_create, and another to apply various parameters, however this
+ * creates some ambiguity for the params which are considered immutable. Also in
+ * general we're phasing out the various SET/GET ioctls.
+ */
+struct drm_i915_gem_create_ext {
+	/**
+	 * @size: Requested size for the object.
+	 *
+	 * The (page-aligned) allocated size for the object will be returned.
+	 *
+	 * DG2 64K min page size implications:
+	 *
+	 * On discrete platforms, starting from DG2, we have to contend with GTT
+	 * page size restrictions when dealing with I915_MEMORY_CLASS_DEVICE
+	 * objects.  Specifically the hardware only supports 64K or larger GTT
+	 * page sizes for such memory. The kernel will already ensure that all
+	 * I915_MEMORY_CLASS_DEVICE memory is allocated using 64K or larger page
+	 * sizes underneath.
+	 *
+	 * Note that the returned size here will always reflect any required
+	 * rounding up done by the kernel, i.e 4K will now become 64K on devices
+	 * such as DG2. The kernel will always select the largest minimum
+	 * page-size for the set of possible placements as the value to use when
+	 * rounding up the @size.
+	 *
+	 * Special DG2 GTT address alignment requirement:
+	 *
+	 * The GTT alignment will also need to be at least 2M for such objects.
+	 *
+	 * Note that due to how the hardware implements 64K GTT page support, we
+	 * have some further complications:
+	 *
+	 *   1) The entire PDE (which covers a 2MB virtual address range), must
+	 *   contain only 64K PTEs, i.e mixing 4K and 64K PTEs in the same
+	 *   PDE is forbidden by the hardware.
+	 *
+	 *   2) We still need to support 4K PTEs for I915_MEMORY_CLASS_SYSTEM
+	 *   objects.
+	 *
+	 * To keep things simple for userland, we mandate that any GTT mappings
+	 * must be aligned to and rounded up to 2MB. The kernel will internally
+	 * pad them out to the next 2MB boundary. As this only wastes virtual
+	 * address space and avoids userland having to copy any needlessly
+	 * complicated PDE sharing scheme (coloring) and only affects DG2, this
+	 * is deemed to be a good compromise.
+	 */
+	__u64 size;
+
+	/**
+	 * @handle: Returned handle for the object.
+	 *
+	 * Object handles are nonzero.
+	 */
+	__u32 handle;
+
+	/**
+	 * @flags: Optional flags.
+	 *
+	 * Supported values:
+	 *
+	 * I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS - Signal to the kernel that
+	 * the object will need to be accessed via the CPU.
+	 *
+	 * Only valid when placing objects in I915_MEMORY_CLASS_DEVICE, and only
+	 * strictly required on configurations where some subset of the device
+	 * memory is directly visible/mappable through the CPU (which we also
+	 * call small BAR), like on some DG2+ systems. Note that this is quite
+	 * undesirable, but due to various factors like the client CPU, BIOS etc
+	 * it's something we can expect to see in the wild. See
+	 * &drm_i915_memory_region_info.probed_cpu_visible_size for how to
+	 * determine if this system applies.
+	 *
+	 * Note that one of the placements MUST be I915_MEMORY_CLASS_SYSTEM, to
+	 * ensure the kernel can always spill the allocation to system memory,
+	 * if the object can't be allocated in the mappable part of
+	 * I915_MEMORY_CLASS_DEVICE.
+	 *
+	 * Also note that since the kernel only supports flat-CCS on objects
+	 * that can *only* be placed in I915_MEMORY_CLASS_DEVICE, we therefore
+	 * don't support I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS together with
+	 * flat-CCS.
+	 *
+	 * Without this hint, the kernel will assume that non-mappable
+	 * I915_MEMORY_CLASS_DEVICE is preferred for this object. Note that the
+	 * kernel can still migrate the object to the mappable part, as a last
+	 * resort, if userspace ever CPU faults this object, but this might be
+	 * expensive, and so ideally should be avoided.
+	 *
+	 * On older kernels which lack the relevant small-bar uAPI support (see
+	 * also &drm_i915_memory_region_info.probed_cpu_visible_size),
+	 * usage of the flag will result in an error, but it should NEVER be
+	 * possible to end up with a small BAR configuration, assuming we can
+	 * also successfully load the i915 kernel module. In such cases the
+	 * entire I915_MEMORY_CLASS_DEVICE region will be CPU accessible, and as
+	 * such there are zero restrictions on where the object can be placed.
+	 */
+#define I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS (1 << 0)
+	__u32 flags;
+
+	/**
+	 * @extensions: The chain of extensions to apply to this object.
+	 *
+	 * This will be useful in the future when we need to support several
+	 * different extensions, and we need to apply more than one when
+	 * creating the object. See struct i915_user_extension.
+	 *
+	 * If we don't supply any extensions then we get the same old gem_create
+	 * behaviour.
+	 *
+	 * For I915_GEM_CREATE_EXT_MEMORY_REGIONS usage see
+	 * struct drm_i915_gem_create_ext_memory_regions.
+	 *
+	 * For I915_GEM_CREATE_EXT_PROTECTED_CONTENT usage see
+	 * struct drm_i915_gem_create_ext_protected_content.
+	 */
+#define I915_GEM_CREATE_EXT_MEMORY_REGIONS 0
+#define I915_GEM_CREATE_EXT_PROTECTED_CONTENT 1
+	__u64 extensions;
+};
+
+/**
+ * struct drm_i915_gem_create_ext_memory_regions - The
+ * I915_GEM_CREATE_EXT_MEMORY_REGIONS extension.
+ *
+ * Set the object with the desired set of placements/regions in priority
+ * order. Each entry must be unique and supported by the device.
+ *
+ * This is provided as an array of struct drm_i915_gem_memory_class_instance, or
+ * an equivalent layout of class:instance pair encodings. See struct
+ * drm_i915_query_memory_regions and DRM_I915_QUERY_MEMORY_REGIONS for how to
+ * query the supported regions for a device.
+ *
+ * As an example, on discrete devices, if we wish to set the placement as
+ * device local-memory we can do something like:
+ *
+ * .. code-block:: C
+ *
+ *	struct drm_i915_gem_memory_class_instance region_lmem = {
+ *              .memory_class = I915_MEMORY_CLASS_DEVICE,
+ *              .memory_instance = 0,
+ *      };
+ *      struct drm_i915_gem_create_ext_memory_regions regions = {
+ *              .base = { .name = I915_GEM_CREATE_EXT_MEMORY_REGIONS },
+ *              .regions = (uintptr_t)&region_lmem,
+ *              .num_regions = 1,
+ *      };
+ *      struct drm_i915_gem_create_ext create_ext = {
+ *              .size = 16 * PAGE_SIZE,
+ *              .extensions = (uintptr_t)&regions,
+ *      };
+ *
+ *      int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext);
+ *      if (err) ...
+ *
+ * At which point we get the object handle in &drm_i915_gem_create_ext.handle,
+ * along with the final object size in &drm_i915_gem_create_ext.size, which
+ * should account for any rounding up, if required.
+ *
+ * Note that userspace has no means of knowing the current backing region
+ * for objects where @num_regions is larger than one. The kernel will only
+ * ensure that the priority order of the @regions array is honoured, either
+ * when initially placing the object, or when moving memory around due to
+ * memory pressure
+ *
+ * On Flat-CCS capable HW, compression is supported for the objects residing
+ * in I915_MEMORY_CLASS_DEVICE. When such objects (compressed) have other
+ * memory class in @regions and migrated (by i915, due to memory
+ * constraints) to the non I915_MEMORY_CLASS_DEVICE region, then i915 needs to
+ * decompress the content. But i915 doesn't have the required information to
+ * decompress the userspace compressed objects.
+ *
+ * So i915 supports Flat-CCS, on the objects which can reside only on
+ * I915_MEMORY_CLASS_DEVICE regions.
+ */
+struct drm_i915_gem_create_ext_memory_regions {
+	/** @base: Extension link. See struct i915_user_extension. */
+	struct i915_user_extension base;
+
+	/** @pad: MBZ */
+	__u32 pad;
+	/** @num_regions: Number of elements in the @regions array. */
+	__u32 num_regions;
+	/**
+	 * @regions: The regions/placements array.
+	 *
+	 * An array of struct drm_i915_gem_memory_class_instance.
+	 */
+	__u64 regions;
+};
+
+/**
+ * struct drm_i915_gem_create_ext_protected_content - The
+ * I915_OBJECT_PARAM_PROTECTED_CONTENT extension.
+ *
+ * If this extension is provided, buffer contents are expected to be protected
+ * by PXP encryption and require decryption for scan out and processing. This
+ * is only possible on platforms that have PXP enabled, on all other scenarios
+ * using this extension will cause the ioctl to fail and return -ENODEV. The
+ * flags parameter is reserved for future expansion and must currently be set
+ * to zero.
+ *
+ * The buffer contents are considered invalid after a PXP session teardown.
+ *
+ * The encryption is guaranteed to be processed correctly only if the object
+ * is submitted with a context created using the
+ * I915_CONTEXT_PARAM_PROTECTED_CONTENT flag. This will also enable extra checks
+ * at submission time on the validity of the objects involved.
+ *
+ * Below is an example on how to create a protected object:
+ *
+ * .. code-block:: C
+ *
+ *      struct drm_i915_gem_create_ext_protected_content protected_ext = {
+ *              .base = { .name = I915_GEM_CREATE_EXT_PROTECTED_CONTENT },
+ *              .flags = 0,
+ *      };
+ *      struct drm_i915_gem_create_ext create_ext = {
+ *              .size = PAGE_SIZE,
+ *              .extensions = (uintptr_t)&protected_ext,
+ *      };
+ *
+ *      int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext);
+ *      if (err) ...
+ */
+struct drm_i915_gem_create_ext_protected_content {
+	/** @base: Extension link. See struct i915_user_extension. */
+	struct i915_user_extension base;
+	/** @flags: reserved for future usage, currently MBZ */
+	__u32 flags;
+};
+
+/* ID of the protected content session managed by i915 when PXP is active */
+#define I915_PROTECTED_CONTENT_DEFAULT_SESSION 0xf
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* _I915_DRM_H_ */
diff --git a/include/drm/mach64_drm.h b/include/drm/mach64_drm.h
new file mode 100644
index 0000000..1f5fd84
--- /dev/null
+++ b/include/drm/mach64_drm.h
@@ -0,0 +1,256 @@
+/* mach64_drm.h -- Public header for the mach64 driver -*- linux-c -*-
+ * Created: Thu Nov 30 20:04:32 2000 by gareth@valinux.com
+ */
+/*
+ * Copyright 2000 Gareth Hughes
+ * Copyright 2002 Frank C. Earl
+ * Copyright 2002-2003 Leif Delgass
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT OWNER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Gareth Hughes <gareth@valinux.com>
+ *    Frank C. Earl <fearl@airmail.net>
+ *    Leif Delgass <ldelgass@retinalburn.net>
+ */
+
+#ifndef __MACH64_DRM_H__
+#define __MACH64_DRM_H__
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (mach64_sarea.h)
+ */
+#ifndef __MACH64_SAREA_DEFINES__
+#define __MACH64_SAREA_DEFINES__
+
+/* What needs to be changed for the current vertex buffer?
+ * GH: We're going to be pedantic about this.  We want the card to do as
+ * little as possible, so let's avoid having it fetch a whole bunch of
+ * register values that don't change all that often, if at all.
+ */
+#define MACH64_UPLOAD_DST_OFF_PITCH	0x0001
+#define MACH64_UPLOAD_Z_OFF_PITCH	0x0002
+#define MACH64_UPLOAD_Z_ALPHA_CNTL	0x0004
+#define MACH64_UPLOAD_SCALE_3D_CNTL	0x0008
+#define MACH64_UPLOAD_DP_FOG_CLR	0x0010
+#define MACH64_UPLOAD_DP_WRITE_MASK	0x0020
+#define MACH64_UPLOAD_DP_PIX_WIDTH	0x0040
+#define MACH64_UPLOAD_SETUP_CNTL	0x0080
+#define MACH64_UPLOAD_MISC		0x0100
+#define MACH64_UPLOAD_TEXTURE		0x0200
+#define MACH64_UPLOAD_TEX0IMAGE		0x0400
+#define MACH64_UPLOAD_TEX1IMAGE		0x0800
+#define MACH64_UPLOAD_CLIPRECTS		0x1000	/* handled client-side */
+#define MACH64_UPLOAD_CONTEXT		0x00ff
+#define MACH64_UPLOAD_ALL		0x1fff
+
+/* DMA buffer size
+ */
+#define MACH64_BUFFER_SIZE		16384
+
+/* Max number of swaps allowed on the ring
+ * before the client must wait
+ */
+#define MACH64_MAX_QUEUED_FRAMES        3U
+
+/* Byte offsets for host blit buffer data
+ */
+#define MACH64_HOSTDATA_BLIT_OFFSET	104
+
+/* Keep these small for testing.
+ */
+#define MACH64_NR_SAREA_CLIPRECTS	8
+
+#define MACH64_CARD_HEAP		0
+#define MACH64_AGP_HEAP			1
+#define MACH64_NR_TEX_HEAPS		2
+#define MACH64_NR_TEX_REGIONS		64
+#define MACH64_LOG_TEX_GRANULARITY	16
+
+#define MACH64_TEX_MAXLEVELS		1
+
+#define MACH64_NR_CONTEXT_REGS		15
+#define MACH64_NR_TEXTURE_REGS		4
+
+#endif				/* __MACH64_SAREA_DEFINES__ */
+
+typedef struct {
+	unsigned int dst_off_pitch;
+
+	unsigned int z_off_pitch;
+	unsigned int z_cntl;
+	unsigned int alpha_tst_cntl;
+
+	unsigned int scale_3d_cntl;
+
+	unsigned int sc_left_right;
+	unsigned int sc_top_bottom;
+
+	unsigned int dp_fog_clr;
+	unsigned int dp_write_mask;
+	unsigned int dp_pix_width;
+	unsigned int dp_mix;
+	unsigned int dp_src;
+
+	unsigned int clr_cmp_cntl;
+	unsigned int gui_traj_cntl;
+
+	unsigned int setup_cntl;
+
+	unsigned int tex_size_pitch;
+	unsigned int tex_cntl;
+	unsigned int secondary_tex_off;
+	unsigned int tex_offset;
+} drm_mach64_context_regs_t;
+
+typedef struct drm_mach64_sarea {
+	/* The channel for communication of state information to the kernel
+	 * on firing a vertex dma buffer.
+	 */
+	drm_mach64_context_regs_t context_state;
+	unsigned int dirty;
+	unsigned int vertsize;
+
+	/* The current cliprects, or a subset thereof.
+	 */
+	struct drm_clip_rect boxes[MACH64_NR_SAREA_CLIPRECTS];
+	unsigned int nbox;
+
+	/* Counters for client-side throttling of rendering clients.
+	 */
+	unsigned int frames_queued;
+
+	/* Texture memory LRU.
+	 */
+	struct drm_tex_region tex_list[MACH64_NR_TEX_HEAPS][MACH64_NR_TEX_REGIONS +
+						       1];
+	unsigned int tex_age[MACH64_NR_TEX_HEAPS];
+	int ctx_owner;
+} drm_mach64_sarea_t;
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (mach64_common.h)
+ */
+
+/* Mach64 specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+
+#define DRM_MACH64_INIT           0x00
+#define DRM_MACH64_IDLE           0x01
+#define DRM_MACH64_RESET          0x02
+#define DRM_MACH64_SWAP           0x03
+#define DRM_MACH64_CLEAR          0x04
+#define DRM_MACH64_VERTEX         0x05
+#define DRM_MACH64_BLIT           0x06
+#define DRM_MACH64_FLUSH          0x07
+#define DRM_MACH64_GETPARAM       0x08
+
+#define DRM_IOCTL_MACH64_INIT           DRM_IOW( DRM_COMMAND_BASE + DRM_MACH64_INIT, drm_mach64_init_t)
+#define DRM_IOCTL_MACH64_IDLE           DRM_IO(  DRM_COMMAND_BASE + DRM_MACH64_IDLE )
+#define DRM_IOCTL_MACH64_RESET          DRM_IO(  DRM_COMMAND_BASE + DRM_MACH64_RESET )
+#define DRM_IOCTL_MACH64_SWAP           DRM_IO(  DRM_COMMAND_BASE + DRM_MACH64_SWAP )
+#define DRM_IOCTL_MACH64_CLEAR          DRM_IOW( DRM_COMMAND_BASE + DRM_MACH64_CLEAR, drm_mach64_clear_t)
+#define DRM_IOCTL_MACH64_VERTEX         DRM_IOW( DRM_COMMAND_BASE + DRM_MACH64_VERTEX, drm_mach64_vertex_t)
+#define DRM_IOCTL_MACH64_BLIT           DRM_IOW( DRM_COMMAND_BASE + DRM_MACH64_BLIT, drm_mach64_blit_t)
+#define DRM_IOCTL_MACH64_FLUSH          DRM_IO(  DRM_COMMAND_BASE + DRM_MACH64_FLUSH )
+#define DRM_IOCTL_MACH64_GETPARAM       DRM_IOWR( DRM_COMMAND_BASE + DRM_MACH64_GETPARAM, drm_mach64_getparam_t)
+
+/* Buffer flags for clears
+ */
+#define MACH64_FRONT			0x1
+#define MACH64_BACK			0x2
+#define MACH64_DEPTH			0x4
+
+/* Primitive types for vertex buffers
+ */
+#define MACH64_PRIM_POINTS		0x00000000
+#define MACH64_PRIM_LINES		0x00000001
+#define MACH64_PRIM_LINE_LOOP		0x00000002
+#define MACH64_PRIM_LINE_STRIP		0x00000003
+#define MACH64_PRIM_TRIANGLES		0x00000004
+#define MACH64_PRIM_TRIANGLE_STRIP	0x00000005
+#define MACH64_PRIM_TRIANGLE_FAN	0x00000006
+#define MACH64_PRIM_QUADS		0x00000007
+#define MACH64_PRIM_QUAD_STRIP		0x00000008
+#define MACH64_PRIM_POLYGON		0x00000009
+
+typedef enum _drm_mach64_dma_mode_t {
+	MACH64_MODE_DMA_ASYNC,
+	MACH64_MODE_DMA_SYNC,
+	MACH64_MODE_MMIO
+} drm_mach64_dma_mode_t;
+
+typedef struct drm_mach64_init {
+	enum {
+		DRM_MACH64_INIT_DMA = 0x01,
+		DRM_MACH64_CLEANUP_DMA = 0x02
+	} func;
+
+	unsigned long sarea_priv_offset;
+	int is_pci;
+	drm_mach64_dma_mode_t dma_mode;
+
+	unsigned int fb_bpp;
+	unsigned int front_offset, front_pitch;
+	unsigned int back_offset, back_pitch;
+
+	unsigned int depth_bpp;
+	unsigned int depth_offset, depth_pitch;
+
+	unsigned long fb_offset;
+	unsigned long mmio_offset;
+	unsigned long ring_offset;
+	unsigned long buffers_offset;
+	unsigned long agp_textures_offset;
+} drm_mach64_init_t;
+
+typedef struct drm_mach64_clear {
+	unsigned int flags;
+	int x, y, w, h;
+	unsigned int clear_color;
+	unsigned int clear_depth;
+} drm_mach64_clear_t;
+
+typedef struct drm_mach64_vertex {
+	int prim;
+	void *buf;		/* Address of vertex buffer */
+	unsigned long used;	/* Number of bytes in buffer */
+	int discard;		/* Client finished with buffer? */
+} drm_mach64_vertex_t;
+
+typedef struct drm_mach64_blit {
+	void *buf;
+	int pitch;
+	int offset;
+	int format;
+	unsigned short x, y;
+	unsigned short width, height;
+} drm_mach64_blit_t;
+
+typedef struct drm_mach64_getparam {
+	enum {
+		MACH64_PARAM_FRAMES_QUEUED = 0x01,
+		MACH64_PARAM_IRQ_NR = 0x02
+	} param;
+	void *value;
+} drm_mach64_getparam_t;
+
+#endif
diff --git a/include/drm/mga_drm.h b/include/drm/mga_drm.h
new file mode 100644
index 0000000..7930011
--- /dev/null
+++ b/include/drm/mga_drm.h
@@ -0,0 +1,427 @@
+/* mga_drm.h -- Public header for the Matrox g200/g400 driver -*- linux-c -*-
+ * Created: Tue Jan 25 01:50:01 1999 by jhartmann@precisioninsight.com
+ *
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Jeff Hartmann <jhartmann@valinux.com>
+ *    Keith Whitwell <keith@tungstengraphics.com>
+ *
+ * Rewritten by:
+ *    Gareth Hughes <gareth@valinux.com>
+ */
+
+#ifndef __MGA_DRM_H__
+#define __MGA_DRM_H__
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (mga_sarea.h)
+ */
+
+#ifndef __MGA_SAREA_DEFINES__
+#define __MGA_SAREA_DEFINES__
+
+/* WARP pipe flags
+ */
+#define MGA_F			0x1	/* fog */
+#define MGA_A			0x2	/* alpha */
+#define MGA_S			0x4	/* specular */
+#define MGA_T2			0x8	/* multitexture */
+
+#define MGA_WARP_TGZ		0
+#define MGA_WARP_TGZF		(MGA_F)
+#define MGA_WARP_TGZA		(MGA_A)
+#define MGA_WARP_TGZAF		(MGA_F|MGA_A)
+#define MGA_WARP_TGZS		(MGA_S)
+#define MGA_WARP_TGZSF		(MGA_S|MGA_F)
+#define MGA_WARP_TGZSA		(MGA_S|MGA_A)
+#define MGA_WARP_TGZSAF		(MGA_S|MGA_F|MGA_A)
+#define MGA_WARP_T2GZ		(MGA_T2)
+#define MGA_WARP_T2GZF		(MGA_T2|MGA_F)
+#define MGA_WARP_T2GZA		(MGA_T2|MGA_A)
+#define MGA_WARP_T2GZAF		(MGA_T2|MGA_A|MGA_F)
+#define MGA_WARP_T2GZS		(MGA_T2|MGA_S)
+#define MGA_WARP_T2GZSF		(MGA_T2|MGA_S|MGA_F)
+#define MGA_WARP_T2GZSA		(MGA_T2|MGA_S|MGA_A)
+#define MGA_WARP_T2GZSAF	(MGA_T2|MGA_S|MGA_F|MGA_A)
+
+#define MGA_MAX_G200_PIPES	8	/* no multitex */
+#define MGA_MAX_G400_PIPES	16
+#define MGA_MAX_WARP_PIPES	MGA_MAX_G400_PIPES
+#define MGA_WARP_UCODE_SIZE	32768	/* in bytes */
+
+#define MGA_CARD_TYPE_G200	1
+#define MGA_CARD_TYPE_G400	2
+#define MGA_CARD_TYPE_G450	3	/* not currently used */
+#define MGA_CARD_TYPE_G550	4
+
+#define MGA_FRONT		0x1
+#define MGA_BACK		0x2
+#define MGA_DEPTH		0x4
+
+/* What needs to be changed for the current vertex dma buffer?
+ */
+#define MGA_UPLOAD_CONTEXT	0x1
+#define MGA_UPLOAD_TEX0		0x2
+#define MGA_UPLOAD_TEX1		0x4
+#define MGA_UPLOAD_PIPE		0x8
+#define MGA_UPLOAD_TEX0IMAGE	0x10	/* handled client-side */
+#define MGA_UPLOAD_TEX1IMAGE	0x20	/* handled client-side */
+#define MGA_UPLOAD_2D		0x40
+#define MGA_WAIT_AGE		0x80	/* handled client-side */
+#define MGA_UPLOAD_CLIPRECTS	0x100	/* handled client-side */
+#if 0
+#define MGA_DMA_FLUSH		0x200	/* set when someone gets the lock
+					   quiescent */
+#endif
+
+/* 32 buffers of 64k each, total 2 meg.
+ */
+#define MGA_BUFFER_SIZE		(1 << 16)
+#define MGA_NUM_BUFFERS		128
+
+/* Keep these small for testing.
+ */
+#define MGA_NR_SAREA_CLIPRECTS	8
+
+/* 2 heaps (1 for card, 1 for agp), each divided into up to 128
+ * regions, subject to a minimum region size of (1<<16) == 64k.
+ *
+ * Clients may subdivide regions internally, but when sharing between
+ * clients, the region size is the minimum granularity.
+ */
+
+#define MGA_CARD_HEAP			0
+#define MGA_AGP_HEAP			1
+#define MGA_NR_TEX_HEAPS		2
+#define MGA_NR_TEX_REGIONS		16
+#define MGA_LOG_MIN_TEX_REGION_SIZE	16
+
+#define  DRM_MGA_IDLE_RETRY          2048
+
+#endif				/* __MGA_SAREA_DEFINES__ */
+
+/* Setup registers for 3D context
+ */
+typedef struct {
+	unsigned int dstorg;
+	unsigned int maccess;
+	unsigned int plnwt;
+	unsigned int dwgctl;
+	unsigned int alphactrl;
+	unsigned int fogcolor;
+	unsigned int wflag;
+	unsigned int tdualstage0;
+	unsigned int tdualstage1;
+	unsigned int fcol;
+	unsigned int stencil;
+	unsigned int stencilctl;
+} drm_mga_context_regs_t;
+
+/* Setup registers for 2D, X server
+ */
+typedef struct {
+	unsigned int pitch;
+} drm_mga_server_regs_t;
+
+/* Setup registers for each texture unit
+ */
+typedef struct {
+	unsigned int texctl;
+	unsigned int texctl2;
+	unsigned int texfilter;
+	unsigned int texbordercol;
+	unsigned int texorg;
+	unsigned int texwidth;
+	unsigned int texheight;
+	unsigned int texorg1;
+	unsigned int texorg2;
+	unsigned int texorg3;
+	unsigned int texorg4;
+} drm_mga_texture_regs_t;
+
+/* General aging mechanism
+ */
+typedef struct {
+	unsigned int head;	/* Position of head pointer          */
+	unsigned int wrap;	/* Primary DMA wrap count            */
+} drm_mga_age_t;
+
+typedef struct _drm_mga_sarea {
+	/* The channel for communication of state information to the kernel
+	 * on firing a vertex dma buffer.
+	 */
+	drm_mga_context_regs_t context_state;
+	drm_mga_server_regs_t server_state;
+	drm_mga_texture_regs_t tex_state[2];
+	unsigned int warp_pipe;
+	unsigned int dirty;
+	unsigned int vertsize;
+
+	/* The current cliprects, or a subset thereof.
+	 */
+	struct drm_clip_rect boxes[MGA_NR_SAREA_CLIPRECTS];
+	unsigned int nbox;
+
+	/* Information about the most recently used 3d drawable.  The
+	 * client fills in the req_* fields, the server fills in the
+	 * exported_ fields and puts the cliprects into boxes, above.
+	 *
+	 * The client clears the exported_drawable field before
+	 * clobbering the boxes data.
+	 */
+	unsigned int req_drawable;	/* the X drawable id */
+	unsigned int req_draw_buffer;	/* MGA_FRONT or MGA_BACK */
+
+	unsigned int exported_drawable;
+	unsigned int exported_index;
+	unsigned int exported_stamp;
+	unsigned int exported_buffers;
+	unsigned int exported_nfront;
+	unsigned int exported_nback;
+	int exported_back_x, exported_front_x, exported_w;
+	int exported_back_y, exported_front_y, exported_h;
+	struct drm_clip_rect exported_boxes[MGA_NR_SAREA_CLIPRECTS];
+
+	/* Counters for aging textures and for client-side throttling.
+	 */
+	unsigned int status[4];
+	unsigned int last_wrap;
+
+	drm_mga_age_t last_frame;
+	unsigned int last_enqueue;	/* last time a buffer was enqueued */
+	unsigned int last_dispatch;	/* age of the most recently dispatched buffer */
+	unsigned int last_quiescent;	/*  */
+
+	/* LRU lists for texture memory in agp space and on the card.
+	 */
+	struct drm_tex_region texList[MGA_NR_TEX_HEAPS][MGA_NR_TEX_REGIONS + 1];
+	unsigned int texAge[MGA_NR_TEX_HEAPS];
+
+	/* Mechanism to validate card state.
+	 */
+	int ctxOwner;
+} drm_mga_sarea_t;
+
+/* MGA specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_MGA_INIT     0x00
+#define DRM_MGA_FLUSH    0x01
+#define DRM_MGA_RESET    0x02
+#define DRM_MGA_SWAP     0x03
+#define DRM_MGA_CLEAR    0x04
+#define DRM_MGA_VERTEX   0x05
+#define DRM_MGA_INDICES  0x06
+#define DRM_MGA_ILOAD    0x07
+#define DRM_MGA_BLIT     0x08
+#define DRM_MGA_GETPARAM 0x09
+
+/* 3.2:
+ * ioctls for operating on fences.
+ */
+#define DRM_MGA_SET_FENCE      0x0a
+#define DRM_MGA_WAIT_FENCE     0x0b
+#define DRM_MGA_DMA_BOOTSTRAP  0x0c
+
+#define DRM_IOCTL_MGA_INIT     DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_INIT, drm_mga_init_t)
+#define DRM_IOCTL_MGA_FLUSH    DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_FLUSH, struct drm_lock)
+#define DRM_IOCTL_MGA_RESET    DRM_IO(  DRM_COMMAND_BASE + DRM_MGA_RESET)
+#define DRM_IOCTL_MGA_SWAP     DRM_IO(  DRM_COMMAND_BASE + DRM_MGA_SWAP)
+#define DRM_IOCTL_MGA_CLEAR    DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_CLEAR, drm_mga_clear_t)
+#define DRM_IOCTL_MGA_VERTEX   DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_VERTEX, drm_mga_vertex_t)
+#define DRM_IOCTL_MGA_INDICES  DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_INDICES, drm_mga_indices_t)
+#define DRM_IOCTL_MGA_ILOAD    DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_ILOAD, drm_mga_iload_t)
+#define DRM_IOCTL_MGA_BLIT     DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_BLIT, drm_mga_blit_t)
+#define DRM_IOCTL_MGA_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_GETPARAM, drm_mga_getparam_t)
+#define DRM_IOCTL_MGA_SET_FENCE     DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_SET_FENCE, __u32)
+#define DRM_IOCTL_MGA_WAIT_FENCE    DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_WAIT_FENCE, __u32)
+#define DRM_IOCTL_MGA_DMA_BOOTSTRAP DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_DMA_BOOTSTRAP, drm_mga_dma_bootstrap_t)
+
+typedef struct _drm_mga_warp_index {
+	int installed;
+	unsigned long phys_addr;
+	int size;
+} drm_mga_warp_index_t;
+
+typedef struct drm_mga_init {
+	enum {
+		MGA_INIT_DMA = 0x01,
+		MGA_CLEANUP_DMA = 0x02
+	} func;
+
+	unsigned long sarea_priv_offset;
+
+	int chipset;
+	int sgram;
+
+	unsigned int maccess;
+
+	unsigned int fb_cpp;
+	unsigned int front_offset, front_pitch;
+	unsigned int back_offset, back_pitch;
+
+	unsigned int depth_cpp;
+	unsigned int depth_offset, depth_pitch;
+
+	unsigned int texture_offset[MGA_NR_TEX_HEAPS];
+	unsigned int texture_size[MGA_NR_TEX_HEAPS];
+
+	unsigned long fb_offset;
+	unsigned long mmio_offset;
+	unsigned long status_offset;
+	unsigned long warp_offset;
+	unsigned long primary_offset;
+	unsigned long buffers_offset;
+} drm_mga_init_t;
+
+typedef struct drm_mga_dma_bootstrap {
+	/**
+	 * \name AGP texture region
+	 *
+	 * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, these fields will
+	 * be filled in with the actual AGP texture settings.
+	 *
+	 * \warning
+	 * If these fields are non-zero, but dma_mga_dma_bootstrap::agp_mode
+	 * is zero, it means that PCI memory (most likely through the use of
+	 * an IOMMU) is being used for "AGP" textures.
+	 */
+	/*@{ */
+	unsigned long texture_handle; /**< Handle used to map AGP textures. */
+	__u32 texture_size;	      /**< Size of the AGP texture region. */
+	/*@} */
+
+	/**
+	 * Requested size of the primary DMA region.
+	 *
+	 * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+	 * filled in with the actual AGP mode.  If AGP was not available
+	 */
+	__u32 primary_size;
+
+	/**
+	 * Requested number of secondary DMA buffers.
+	 *
+	 * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+	 * filled in with the actual number of secondary DMA buffers
+	 * allocated.  Particularly when PCI DMA is used, this may be
+	 * (subtantially) less than the number requested.
+	 */
+	__u32 secondary_bin_count;
+
+	/**
+	 * Requested size of each secondary DMA buffer.
+	 *
+	 * While the kernel \b is free to reduce
+	 * dma_mga_dma_bootstrap::secondary_bin_count, it is \b not allowed
+	 * to reduce dma_mga_dma_bootstrap::secondary_bin_size.
+	 */
+	__u32 secondary_bin_size;
+
+	/**
+	 * Bit-wise mask of AGPSTAT2_* values.  Currently only \c AGPSTAT2_1X,
+	 * \c AGPSTAT2_2X, and \c AGPSTAT2_4X are supported.  If this value is
+	 * zero, it means that PCI DMA should be used, even if AGP is
+	 * possible.
+	 *
+	 * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+	 * filled in with the actual AGP mode.  If AGP was not available
+	 * (i.e., PCI DMA was used), this value will be zero.
+	 */
+	__u32 agp_mode;
+
+	/**
+	 * Desired AGP GART size, measured in megabytes.
+	 */
+	__u8 agp_size;
+} drm_mga_dma_bootstrap_t;
+
+typedef struct drm_mga_clear {
+	unsigned int flags;
+	unsigned int clear_color;
+	unsigned int clear_depth;
+	unsigned int color_mask;
+	unsigned int depth_mask;
+} drm_mga_clear_t;
+
+typedef struct drm_mga_vertex {
+	int idx;		/* buffer to queue */
+	int used;		/* bytes in use */
+	int discard;		/* client finished with buffer?  */
+} drm_mga_vertex_t;
+
+typedef struct drm_mga_indices {
+	int idx;		/* buffer to queue */
+	unsigned int start;
+	unsigned int end;
+	int discard;		/* client finished with buffer?  */
+} drm_mga_indices_t;
+
+typedef struct drm_mga_iload {
+	int idx;
+	unsigned int dstorg;
+	unsigned int length;
+} drm_mga_iload_t;
+
+typedef struct _drm_mga_blit {
+	unsigned int planemask;
+	unsigned int srcorg;
+	unsigned int dstorg;
+	int src_pitch, dst_pitch;
+	int delta_sx, delta_sy;
+	int delta_dx, delta_dy;
+	int height, ydir;	/* flip image vertically */
+	int source_pitch, dest_pitch;
+} drm_mga_blit_t;
+
+/* 3.1: An ioctl to get parameters that aren't available to the 3d
+ * client any other way.
+ */
+#define MGA_PARAM_IRQ_NR            1
+
+/* 3.2: Query the actual card type.  The DDX only distinguishes between
+ * G200 chips and non-G200 chips, which it calls G400.  It turns out that
+ * there are some very sublte differences between the G4x0 chips and the G550
+ * chips.  Using this parameter query, a client-side driver can detect the
+ * difference between a G4x0 and a G550.
+ */
+#define MGA_PARAM_CARD_TYPE         2
+
+typedef struct drm_mga_getparam {
+	int param;
+	void *value;
+} drm_mga_getparam_t;
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
diff --git a/include/drm/msm_drm.h b/include/drm/msm_drm.h
new file mode 100644
index 0000000..c06d0a5
--- /dev/null
+++ b/include/drm/msm_drm.h
@@ -0,0 +1,308 @@
+/*
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __MSM_DRM_H__
+#define __MSM_DRM_H__
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* Please note that modifications to all structs defined here are
+ * subject to backwards-compatibility constraints:
+ *  1) Do not use pointers, use __u64 instead for 32 bit / 64 bit
+ *     user/kernel compatibility
+ *  2) Keep fields aligned to their size
+ *  3) Because of how drm_ioctl() works, we can add new fields at
+ *     the end of an ioctl if some care is taken: drm_ioctl() will
+ *     zero out the new fields at the tail of the ioctl, so a zero
+ *     value should have a backwards compatible meaning.  And for
+ *     output params, userspace won't see the newly added output
+ *     fields.. so that has to be somehow ok.
+ */
+
+#define MSM_PIPE_NONE        0x00
+#define MSM_PIPE_2D0         0x01
+#define MSM_PIPE_2D1         0x02
+#define MSM_PIPE_3D0         0x10
+
+/* The pipe-id just uses the lower bits, so can be OR'd with flags in
+ * the upper 16 bits (which could be extended further, if needed, maybe
+ * we extend/overload the pipe-id some day to deal with multiple rings,
+ * but even then I don't think we need the full lower 16 bits).
+ */
+#define MSM_PIPE_ID_MASK     0xffff
+#define MSM_PIPE_ID(x)       ((x) & MSM_PIPE_ID_MASK)
+#define MSM_PIPE_FLAGS(x)    ((x) & ~MSM_PIPE_ID_MASK)
+
+/* timeouts are specified in clock-monotonic absolute times (to simplify
+ * restarting interrupted ioctls).  The following struct is logically the
+ * same as 'struct timespec' but 32/64b ABI safe.
+ */
+struct drm_msm_timespec {
+	__s64 tv_sec;          /* seconds */
+	__s64 tv_nsec;         /* nanoseconds */
+};
+
+#define MSM_PARAM_GPU_ID     0x01
+#define MSM_PARAM_GMEM_SIZE  0x02
+#define MSM_PARAM_CHIP_ID    0x03
+#define MSM_PARAM_MAX_FREQ   0x04
+#define MSM_PARAM_TIMESTAMP  0x05
+#define MSM_PARAM_GMEM_BASE  0x06
+#define MSM_PARAM_NR_RINGS   0x07
+
+struct drm_msm_param {
+	__u32 pipe;           /* in, MSM_PIPE_x */
+	__u32 param;          /* in, MSM_PARAM_x */
+	__u64 value;          /* out (get_param) or in (set_param) */
+};
+
+/*
+ * GEM buffers:
+ */
+
+#define MSM_BO_SCANOUT       0x00000001     /* scanout capable */
+#define MSM_BO_GPU_READONLY  0x00000002
+#define MSM_BO_CACHE_MASK    0x000f0000
+/* cache modes */
+#define MSM_BO_CACHED        0x00010000
+#define MSM_BO_WC            0x00020000
+#define MSM_BO_UNCACHED      0x00040000
+
+#define MSM_BO_FLAGS         (MSM_BO_SCANOUT | \
+                              MSM_BO_GPU_READONLY | \
+                              MSM_BO_CACHED | \
+                              MSM_BO_WC | \
+                              MSM_BO_UNCACHED)
+
+struct drm_msm_gem_new {
+	__u64 size;           /* in */
+	__u32 flags;          /* in, mask of MSM_BO_x */
+	__u32 handle;         /* out */
+};
+
+#define MSM_INFO_IOVA	0x01
+
+#define MSM_INFO_FLAGS (MSM_INFO_IOVA)
+
+struct drm_msm_gem_info {
+	__u32 handle;         /* in */
+	__u32 flags;	      /* in - combination of MSM_INFO_* flags */
+	__u64 offset;         /* out, mmap() offset or iova */
+};
+
+#define MSM_PREP_READ        0x01
+#define MSM_PREP_WRITE       0x02
+#define MSM_PREP_NOSYNC      0x04
+
+#define MSM_PREP_FLAGS       (MSM_PREP_READ | MSM_PREP_WRITE | MSM_PREP_NOSYNC)
+
+struct drm_msm_gem_cpu_prep {
+	__u32 handle;         /* in */
+	__u32 op;             /* in, mask of MSM_PREP_x */
+	struct drm_msm_timespec timeout;   /* in */
+};
+
+struct drm_msm_gem_cpu_fini {
+	__u32 handle;         /* in */
+};
+
+/*
+ * Cmdstream Submission:
+ */
+
+/* The value written into the cmdstream is logically:
+ *
+ *   ((relocbuf->gpuaddr + reloc_offset) << shift) | or
+ *
+ * When we have GPU's w/ >32bit ptrs, it should be possible to deal
+ * with this by emit'ing two reloc entries with appropriate shift
+ * values.  Or a new MSM_SUBMIT_CMD_x type would also be an option.
+ *
+ * NOTE that reloc's must be sorted by order of increasing submit_offset,
+ * otherwise EINVAL.
+ */
+struct drm_msm_gem_submit_reloc {
+	__u32 submit_offset;  /* in, offset from submit_bo */
+	__u32 or;             /* in, value OR'd with result */
+	__s32 shift;          /* in, amount of left shift (can be negative) */
+	__u32 reloc_idx;      /* in, index of reloc_bo buffer */
+	__u64 reloc_offset;   /* in, offset from start of reloc_bo */
+};
+
+/* submit-types:
+ *   BUF - this cmd buffer is executed normally.
+ *   IB_TARGET_BUF - this cmd buffer is an IB target.  Reloc's are
+ *      processed normally, but the kernel does not setup an IB to
+ *      this buffer in the first-level ringbuffer
+ *   CTX_RESTORE_BUF - only executed if there has been a GPU context
+ *      switch since the last SUBMIT ioctl
+ */
+#define MSM_SUBMIT_CMD_BUF             0x0001
+#define MSM_SUBMIT_CMD_IB_TARGET_BUF   0x0002
+#define MSM_SUBMIT_CMD_CTX_RESTORE_BUF 0x0003
+struct drm_msm_gem_submit_cmd {
+	__u32 type;           /* in, one of MSM_SUBMIT_CMD_x */
+	__u32 submit_idx;     /* in, index of submit_bo cmdstream buffer */
+	__u32 submit_offset;  /* in, offset into submit_bo */
+	__u32 size;           /* in, cmdstream size */
+	__u32 pad;
+	__u32 nr_relocs;      /* in, number of submit_reloc's */
+	__u64 relocs;         /* in, ptr to array of submit_reloc's */
+};
+
+/* Each buffer referenced elsewhere in the cmdstream submit (ie. the
+ * cmdstream buffer(s) themselves or reloc entries) has one (and only
+ * one) entry in the submit->bos[] table.
+ *
+ * As a optimization, the current buffer (gpu virtual address) can be
+ * passed back through the 'presumed' field.  If on a subsequent reloc,
+ * userspace passes back a 'presumed' address that is still valid,
+ * then patching the cmdstream for this entry is skipped.  This can
+ * avoid kernel needing to map/access the cmdstream bo in the common
+ * case.
+ */
+#define MSM_SUBMIT_BO_READ             0x0001
+#define MSM_SUBMIT_BO_WRITE            0x0002
+
+#define MSM_SUBMIT_BO_FLAGS            (MSM_SUBMIT_BO_READ | MSM_SUBMIT_BO_WRITE)
+
+struct drm_msm_gem_submit_bo {
+	__u32 flags;          /* in, mask of MSM_SUBMIT_BO_x */
+	__u32 handle;         /* in, GEM handle */
+	__u64 presumed;       /* in/out, presumed buffer address */
+};
+
+/* Valid submit ioctl flags: */
+#define MSM_SUBMIT_NO_IMPLICIT   0x80000000 /* disable implicit sync */
+#define MSM_SUBMIT_FENCE_FD_IN   0x40000000 /* enable input fence_fd */
+#define MSM_SUBMIT_FENCE_FD_OUT  0x20000000 /* enable output fence_fd */
+#define MSM_SUBMIT_SUDO          0x10000000 /* run submitted cmds from RB */
+#define MSM_SUBMIT_FLAGS                ( \
+		MSM_SUBMIT_NO_IMPLICIT   | \
+		MSM_SUBMIT_FENCE_FD_IN   | \
+		MSM_SUBMIT_FENCE_FD_OUT  | \
+		MSM_SUBMIT_SUDO          | \
+		0)
+
+/* Each cmdstream submit consists of a table of buffers involved, and
+ * one or more cmdstream buffers.  This allows for conditional execution
+ * (context-restore), and IB buffers needed for per tile/bin draw cmds.
+ */
+struct drm_msm_gem_submit {
+	__u32 flags;          /* MSM_PIPE_x | MSM_SUBMIT_x */
+	__u32 fence;          /* out */
+	__u32 nr_bos;         /* in, number of submit_bo's */
+	__u32 nr_cmds;        /* in, number of submit_cmd's */
+	__u64 bos;            /* in, ptr to array of submit_bo's */
+	__u64 cmds;           /* in, ptr to array of submit_cmd's */
+	__s32 fence_fd;       /* in/out fence fd (see MSM_SUBMIT_FENCE_FD_IN/OUT) */
+	__u32 queueid;         /* in, submitqueue id */
+};
+
+/* The normal way to synchronize with the GPU is just to CPU_PREP on
+ * a buffer if you need to access it from the CPU (other cmdstream
+ * submission from same or other contexts, PAGE_FLIP ioctl, etc, all
+ * handle the required synchronization under the hood).  This ioctl
+ * mainly just exists as a way to implement the gallium pipe_fence
+ * APIs without requiring a dummy bo to synchronize on.
+ */
+struct drm_msm_wait_fence {
+	__u32 fence;          /* in */
+	__u32 pad;
+	struct drm_msm_timespec timeout;   /* in */
+	__u32 queueid;         /* in, submitqueue id */
+};
+
+/* madvise provides a way to tell the kernel in case a buffers contents
+ * can be discarded under memory pressure, which is useful for userspace
+ * bo cache where we want to optimistically hold on to buffer allocate
+ * and potential mmap, but allow the pages to be discarded under memory
+ * pressure.
+ *
+ * Typical usage would involve madvise(DONTNEED) when buffer enters BO
+ * cache, and madvise(WILLNEED) if trying to recycle buffer from BO cache.
+ * In the WILLNEED case, 'retained' indicates to userspace whether the
+ * backing pages still exist.
+ */
+#define MSM_MADV_WILLNEED 0       /* backing pages are needed, status returned in 'retained' */
+#define MSM_MADV_DONTNEED 1       /* backing pages not needed */
+#define __MSM_MADV_PURGED 2       /* internal state */
+
+struct drm_msm_gem_madvise {
+	__u32 handle;         /* in, GEM handle */
+	__u32 madv;           /* in, MSM_MADV_x */
+	__u32 retained;       /* out, whether backing store still exists */
+};
+
+/*
+ * Draw queues allow the user to set specific submission parameter. Command
+ * submissions specify a specific submitqueue to use.  ID 0 is reserved for
+ * backwards compatibility as a "default" submitqueue
+ */
+
+#define MSM_SUBMITQUEUE_FLAGS (0)
+
+struct drm_msm_submitqueue {
+	__u32 flags;   /* in, MSM_SUBMITQUEUE_x */
+	__u32 prio;    /* in, Priority level */
+	__u32 id;      /* out, identifier */
+};
+
+#define DRM_MSM_GET_PARAM              0x00
+/* placeholder:
+#define DRM_MSM_SET_PARAM              0x01
+ */
+#define DRM_MSM_GEM_NEW                0x02
+#define DRM_MSM_GEM_INFO               0x03
+#define DRM_MSM_GEM_CPU_PREP           0x04
+#define DRM_MSM_GEM_CPU_FINI           0x05
+#define DRM_MSM_GEM_SUBMIT             0x06
+#define DRM_MSM_WAIT_FENCE             0x07
+#define DRM_MSM_GEM_MADVISE            0x08
+/* placeholder:
+#define DRM_MSM_GEM_SVM_NEW            0x09
+ */
+#define DRM_MSM_SUBMITQUEUE_NEW        0x0A
+#define DRM_MSM_SUBMITQUEUE_CLOSE      0x0B
+
+#define DRM_IOCTL_MSM_GET_PARAM        DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GET_PARAM, struct drm_msm_param)
+#define DRM_IOCTL_MSM_GEM_NEW          DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_NEW, struct drm_msm_gem_new)
+#define DRM_IOCTL_MSM_GEM_INFO         DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_INFO, struct drm_msm_gem_info)
+#define DRM_IOCTL_MSM_GEM_CPU_PREP     DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_GEM_CPU_PREP, struct drm_msm_gem_cpu_prep)
+#define DRM_IOCTL_MSM_GEM_CPU_FINI     DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_GEM_CPU_FINI, struct drm_msm_gem_cpu_fini)
+#define DRM_IOCTL_MSM_GEM_SUBMIT       DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_SUBMIT, struct drm_msm_gem_submit)
+#define DRM_IOCTL_MSM_WAIT_FENCE       DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_WAIT_FENCE, struct drm_msm_wait_fence)
+#define DRM_IOCTL_MSM_GEM_MADVISE      DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_MADVISE, struct drm_msm_gem_madvise)
+#define DRM_IOCTL_MSM_SUBMITQUEUE_NEW    DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_SUBMITQUEUE_NEW, struct drm_msm_submitqueue)
+#define DRM_IOCTL_MSM_SUBMITQUEUE_CLOSE  DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_SUBMITQUEUE_CLOSE, __u32)
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __MSM_DRM_H__ */
diff --git a/include/drm/nouveau_drm.h b/include/drm/nouveau_drm.h
new file mode 100644
index 0000000..4f94148
--- /dev/null
+++ b/include/drm/nouveau_drm.h
@@ -0,0 +1,256 @@
+/*
+ * Copyright 2005 Stephane Marchesin.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __NOUVEAU_DRM_H__
+#define __NOUVEAU_DRM_H__
+
+#define NOUVEAU_DRM_HEADER_PATCHLEVEL 16
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+struct drm_nouveau_channel_alloc {
+	uint32_t     fb_ctxdma_handle;
+	uint32_t     tt_ctxdma_handle;
+
+	int          channel;
+	uint32_t     pushbuf_domains;
+
+	/* Notifier memory */
+	uint32_t     notifier_handle;
+
+	/* DRM-enforced subchannel assignments */
+	struct {
+		uint32_t handle;
+		uint32_t grclass;
+	} subchan[8];
+	uint32_t nr_subchan;
+};
+
+struct drm_nouveau_channel_free {
+	int channel;
+};
+
+struct drm_nouveau_grobj_alloc {
+	int      channel;
+	uint32_t handle;
+	int      class;
+};
+
+struct drm_nouveau_notifierobj_alloc {
+	uint32_t channel;
+	uint32_t handle;
+	uint32_t size;
+	uint32_t offset;
+};
+
+struct drm_nouveau_gpuobj_free {
+	int      channel;
+	uint32_t handle;
+};
+
+#define NOUVEAU_GETPARAM_PCI_VENDOR      3
+#define NOUVEAU_GETPARAM_PCI_DEVICE      4
+#define NOUVEAU_GETPARAM_BUS_TYPE        5
+#define NOUVEAU_GETPARAM_FB_SIZE         8
+#define NOUVEAU_GETPARAM_AGP_SIZE        9
+#define NOUVEAU_GETPARAM_CHIPSET_ID      11
+#define NOUVEAU_GETPARAM_VM_VRAM_BASE    12
+#define NOUVEAU_GETPARAM_GRAPH_UNITS     13
+#define NOUVEAU_GETPARAM_PTIMER_TIME     14
+#define NOUVEAU_GETPARAM_HAS_BO_USAGE    15
+#define NOUVEAU_GETPARAM_HAS_PAGEFLIP    16
+struct drm_nouveau_getparam {
+	uint64_t param;
+	uint64_t value;
+};
+
+struct drm_nouveau_setparam {
+	uint64_t param;
+	uint64_t value;
+};
+
+#define NOUVEAU_GEM_DOMAIN_CPU       (1 << 0)
+#define NOUVEAU_GEM_DOMAIN_VRAM      (1 << 1)
+#define NOUVEAU_GEM_DOMAIN_GART      (1 << 2)
+#define NOUVEAU_GEM_DOMAIN_MAPPABLE  (1 << 3)
+#define NOUVEAU_GEM_DOMAIN_COHERENT  (1 << 4)
+
+#define NOUVEAU_GEM_TILE_COMP        0x00030000 /* nv50-only */
+#define NOUVEAU_GEM_TILE_LAYOUT_MASK 0x0000ff00
+#define NOUVEAU_GEM_TILE_16BPP       0x00000001
+#define NOUVEAU_GEM_TILE_32BPP       0x00000002
+#define NOUVEAU_GEM_TILE_ZETA        0x00000004
+#define NOUVEAU_GEM_TILE_NONCONTIG   0x00000008
+
+struct drm_nouveau_gem_info {
+	__u32 handle;
+	__u32 domain;
+	__u64 size;
+	__u64 offset;
+	__u64 map_handle;
+	__u32 tile_mode;
+	__u32 tile_flags;
+};
+
+struct drm_nouveau_gem_new {
+	struct drm_nouveau_gem_info info;
+	__u32 channel_hint;
+	__u32 align;
+};
+
+#define NOUVEAU_GEM_MAX_BUFFERS 1024
+struct drm_nouveau_gem_pushbuf_bo_presumed {
+	__u32 valid;
+	__u32 domain;
+	__u64 offset;
+};
+
+struct drm_nouveau_gem_pushbuf_bo {
+	__u64 user_priv;
+	__u32 handle;
+	__u32 read_domains;
+	__u32 write_domains;
+	__u32 valid_domains;
+	struct drm_nouveau_gem_pushbuf_bo_presumed presumed;
+};
+
+#define NOUVEAU_GEM_RELOC_LOW  (1 << 0)
+#define NOUVEAU_GEM_RELOC_HIGH (1 << 1)
+#define NOUVEAU_GEM_RELOC_OR   (1 << 2)
+#define NOUVEAU_GEM_MAX_RELOCS 1024
+struct drm_nouveau_gem_pushbuf_reloc {
+	__u32 reloc_bo_index;
+	__u32 reloc_bo_offset;
+	__u32 bo_index;
+	__u32 flags;
+	__u32 data;
+	__u32 vor;
+	__u32 tor;
+};
+
+#define NOUVEAU_GEM_MAX_PUSH 512
+struct drm_nouveau_gem_pushbuf_push {
+	__u32 bo_index;
+	__u32 pad;
+	__u64 offset;
+	__u64 length;
+};
+
+struct drm_nouveau_gem_pushbuf {
+	__u32 channel;
+	__u32 nr_buffers;
+	__u64 buffers;
+	__u32 nr_relocs;
+	__u32 nr_push;
+	__u64 relocs;
+	__u64 push;
+	__u32 suffix0;
+	__u32 suffix1;
+#define NOUVEAU_GEM_PUSHBUF_SYNC                                    (1ULL << 0)
+	__u64 vram_available;
+	__u64 gart_available;
+};
+
+#define NOUVEAU_GEM_CPU_PREP_NOWAIT                                  0x00000001
+#define NOUVEAU_GEM_CPU_PREP_WRITE                                   0x00000004
+struct drm_nouveau_gem_cpu_prep {
+	__u32 handle;
+	__u32 flags;
+};
+
+struct drm_nouveau_gem_cpu_fini {
+	__u32 handle;
+};
+
+#define DRM_NOUVEAU_GETPARAM           0x00 /* deprecated */
+#define DRM_NOUVEAU_SETPARAM           0x01 /* deprecated */
+#define DRM_NOUVEAU_CHANNEL_ALLOC      0x02 /* deprecated */
+#define DRM_NOUVEAU_CHANNEL_FREE       0x03 /* deprecated */
+#define DRM_NOUVEAU_GROBJ_ALLOC        0x04 /* deprecated */
+#define DRM_NOUVEAU_NOTIFIEROBJ_ALLOC  0x05 /* deprecated */
+#define DRM_NOUVEAU_GPUOBJ_FREE        0x06 /* deprecated */
+#define DRM_NOUVEAU_NVIF               0x07
+#define DRM_NOUVEAU_SVM_INIT           0x08
+#define DRM_NOUVEAU_SVM_BIND           0x09
+#define DRM_NOUVEAU_GEM_NEW            0x40
+#define DRM_NOUVEAU_GEM_PUSHBUF        0x41
+#define DRM_NOUVEAU_GEM_CPU_PREP       0x42
+#define DRM_NOUVEAU_GEM_CPU_FINI       0x43
+#define DRM_NOUVEAU_GEM_INFO           0x44
+
+struct drm_nouveau_svm_init {
+	__u64 unmanaged_addr;
+	__u64 unmanaged_size;
+};
+
+struct drm_nouveau_svm_bind {
+	__u64 header;
+	__u64 va_start;
+	__u64 va_end;
+	__u64 npages;
+	__u64 stride;
+	__u64 result;
+	__u64 reserved0;
+	__u64 reserved1;
+};
+
+#define NOUVEAU_SVM_BIND_COMMAND_SHIFT          0
+#define NOUVEAU_SVM_BIND_COMMAND_BITS           8
+#define NOUVEAU_SVM_BIND_COMMAND_MASK           ((1 << 8) - 1)
+#define NOUVEAU_SVM_BIND_PRIORITY_SHIFT         8
+#define NOUVEAU_SVM_BIND_PRIORITY_BITS          8
+#define NOUVEAU_SVM_BIND_PRIORITY_MASK          ((1 << 8) - 1)
+#define NOUVEAU_SVM_BIND_TARGET_SHIFT           16
+#define NOUVEAU_SVM_BIND_TARGET_BITS            32
+#define NOUVEAU_SVM_BIND_TARGET_MASK            0xffffffff
+
+/*
+ * Below is use to validate ioctl argument, userspace can also use it to make
+ * sure that no bit are set beyond known fields for a given kernel version.
+ */
+#define NOUVEAU_SVM_BIND_VALID_BITS     48
+#define NOUVEAU_SVM_BIND_VALID_MASK     ((1ULL << NOUVEAU_SVM_BIND_VALID_BITS) - 1)
+
+
+/*
+ * NOUVEAU_BIND_COMMAND__MIGRATE: synchronous migrate to target memory.
+ * result: number of page successfuly migrate to the target memory.
+ */
+#define NOUVEAU_SVM_BIND_COMMAND__MIGRATE               0
+
+/*
+ * NOUVEAU_SVM_BIND_HEADER_TARGET__GPU_VRAM: target the GPU VRAM memory.
+ */
+#define NOUVEAU_SVM_BIND_TARGET__GPU_VRAM               (1UL << 31)
+
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __NOUVEAU_DRM_H__ */
diff --git a/include/drm/qxl_drm.h b/include/drm/qxl_drm.h
new file mode 100644
index 0000000..880999d
--- /dev/null
+++ b/include/drm/qxl_drm.h
@@ -0,0 +1,158 @@
+/*
+ * Copyright 2013 Red Hat
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#ifndef QXL_DRM_H
+#define QXL_DRM_H
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* Please note that modifications to all structs defined here are
+ * subject to backwards-compatibility constraints.
+ *
+ * Do not use pointers, use __u64 instead for 32 bit / 64 bit user/kernel
+ * compatibility Keep fields aligned to their size
+ */
+
+#define QXL_GEM_DOMAIN_CPU 0
+#define QXL_GEM_DOMAIN_VRAM 1
+#define QXL_GEM_DOMAIN_SURFACE 2
+
+#define DRM_QXL_ALLOC       0x00
+#define DRM_QXL_MAP         0x01
+#define DRM_QXL_EXECBUFFER  0x02
+#define DRM_QXL_UPDATE_AREA 0x03
+#define DRM_QXL_GETPARAM    0x04
+#define DRM_QXL_CLIENTCAP   0x05
+
+#define DRM_QXL_ALLOC_SURF  0x06
+
+struct drm_qxl_alloc {
+	__u32 size;
+	__u32 handle; /* 0 is an invalid handle */
+};
+
+struct drm_qxl_map {
+	__u64 offset; /* use for mmap system call */
+	__u32 handle;
+	__u32 pad;
+};
+
+/*
+ * dest is the bo we are writing the relocation into
+ * src is bo we are relocating.
+ * *(dest_handle.base_addr + dest_offset) = physical_address(src_handle.addr +
+ * src_offset)
+ */
+#define QXL_RELOC_TYPE_BO 1
+#define QXL_RELOC_TYPE_SURF 2
+
+struct drm_qxl_reloc {
+	__u64 src_offset; /* offset into src_handle or src buffer */
+	__u64 dst_offset; /* offset in dest handle */
+	__u32 src_handle; /* dest handle to compute address from */
+	__u32 dst_handle; /* 0 if to command buffer */
+	__u32 reloc_type;
+	__u32 pad;
+};
+
+struct drm_qxl_command {
+	__u64		command; /* void* */
+	__u64		relocs; /* struct drm_qxl_reloc* */
+	__u32		type;
+	__u32		command_size;
+	__u32		relocs_num;
+	__u32                pad;
+};
+
+struct drm_qxl_execbuffer {
+	__u32		flags;		/* for future use */
+	__u32		commands_num;
+	__u64		commands;	/* struct drm_qxl_command* */
+};
+
+struct drm_qxl_update_area {
+	__u32 handle;
+	__u32 top;
+	__u32 left;
+	__u32 bottom;
+	__u32 right;
+	__u32 pad;
+};
+
+#define QXL_PARAM_NUM_SURFACES 1 /* rom->n_surfaces */
+#define QXL_PARAM_MAX_RELOCS 2
+struct drm_qxl_getparam {
+	__u64 param;
+	__u64 value;
+};
+
+/* these are one bit values */
+struct drm_qxl_clientcap {
+	__u32 index;
+	__u32 pad;
+};
+
+struct drm_qxl_alloc_surf {
+	__u32 format;
+	__u32 width;
+	__u32 height;
+	__s32 stride;
+	__u32 handle;
+	__u32 pad;
+};
+
+#define DRM_IOCTL_QXL_ALLOC \
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_QXL_ALLOC, struct drm_qxl_alloc)
+
+#define DRM_IOCTL_QXL_MAP \
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_QXL_MAP, struct drm_qxl_map)
+
+#define DRM_IOCTL_QXL_EXECBUFFER \
+	DRM_IOW(DRM_COMMAND_BASE + DRM_QXL_EXECBUFFER,\
+		struct drm_qxl_execbuffer)
+
+#define DRM_IOCTL_QXL_UPDATE_AREA \
+	DRM_IOW(DRM_COMMAND_BASE + DRM_QXL_UPDATE_AREA,\
+		struct drm_qxl_update_area)
+
+#define DRM_IOCTL_QXL_GETPARAM \
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_QXL_GETPARAM,\
+		struct drm_qxl_getparam)
+
+#define DRM_IOCTL_QXL_CLIENTCAP \
+	DRM_IOW(DRM_COMMAND_BASE + DRM_QXL_CLIENTCAP,\
+		struct drm_qxl_clientcap)
+
+#define DRM_IOCTL_QXL_ALLOC_SURF \
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_QXL_ALLOC_SURF,\
+		struct drm_qxl_alloc_surf)
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
diff --git a/include/drm/r128_drm.h b/include/drm/r128_drm.h
new file mode 100644
index 0000000..bf431a0
--- /dev/null
+++ b/include/drm/r128_drm.h
@@ -0,0 +1,336 @@
+/* r128_drm.h -- Public header for the r128 driver -*- linux-c -*-
+ * Created: Wed Apr  5 19:24:19 2000 by kevin@precisioninsight.com
+ */
+/*
+ * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Gareth Hughes <gareth@valinux.com>
+ *    Kevin E. Martin <martin@valinux.com>
+ */
+
+#ifndef __R128_DRM_H__
+#define __R128_DRM_H__
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the X server file (r128_sarea.h)
+ */
+#ifndef __R128_SAREA_DEFINES__
+#define __R128_SAREA_DEFINES__
+
+/* What needs to be changed for the current vertex buffer?
+ */
+#define R128_UPLOAD_CONTEXT		0x001
+#define R128_UPLOAD_SETUP		0x002
+#define R128_UPLOAD_TEX0		0x004
+#define R128_UPLOAD_TEX1		0x008
+#define R128_UPLOAD_TEX0IMAGES		0x010
+#define R128_UPLOAD_TEX1IMAGES		0x020
+#define R128_UPLOAD_CORE		0x040
+#define R128_UPLOAD_MASKS		0x080
+#define R128_UPLOAD_WINDOW		0x100
+#define R128_UPLOAD_CLIPRECTS		0x200	/* handled client-side */
+#define R128_REQUIRE_QUIESCENCE		0x400
+#define R128_UPLOAD_ALL			0x7ff
+
+#define R128_FRONT			0x1
+#define R128_BACK			0x2
+#define R128_DEPTH			0x4
+
+/* Primitive types
+ */
+#define R128_POINTS			0x1
+#define R128_LINES			0x2
+#define R128_LINE_STRIP			0x3
+#define R128_TRIANGLES			0x4
+#define R128_TRIANGLE_FAN		0x5
+#define R128_TRIANGLE_STRIP		0x6
+
+/* Vertex/indirect buffer size
+ */
+#define R128_BUFFER_SIZE		16384
+
+/* Byte offsets for indirect buffer data
+ */
+#define R128_INDEX_PRIM_OFFSET		20
+#define R128_HOSTDATA_BLIT_OFFSET	32
+
+/* Keep these small for testing.
+ */
+#define R128_NR_SAREA_CLIPRECTS		12
+
+/* There are 2 heaps (local/AGP).  Each region within a heap is a
+ *  minimum of 64k, and there are at most 64 of them per heap.
+ */
+#define R128_LOCAL_TEX_HEAP		0
+#define R128_AGP_TEX_HEAP		1
+#define R128_NR_TEX_HEAPS		2
+#define R128_NR_TEX_REGIONS		64
+#define R128_LOG_TEX_GRANULARITY	16
+
+#define R128_NR_CONTEXT_REGS		12
+
+#define R128_MAX_TEXTURE_LEVELS		11
+#define R128_MAX_TEXTURE_UNITS		2
+
+#endif				/* __R128_SAREA_DEFINES__ */
+
+typedef struct {
+	/* Context state - can be written in one large chunk */
+	unsigned int dst_pitch_offset_c;
+	unsigned int dp_gui_master_cntl_c;
+	unsigned int sc_top_left_c;
+	unsigned int sc_bottom_right_c;
+	unsigned int z_offset_c;
+	unsigned int z_pitch_c;
+	unsigned int z_sten_cntl_c;
+	unsigned int tex_cntl_c;
+	unsigned int misc_3d_state_cntl_reg;
+	unsigned int texture_clr_cmp_clr_c;
+	unsigned int texture_clr_cmp_msk_c;
+	unsigned int fog_color_c;
+
+	/* Texture state */
+	unsigned int tex_size_pitch_c;
+	unsigned int constant_color_c;
+
+	/* Setup state */
+	unsigned int pm4_vc_fpu_setup;
+	unsigned int setup_cntl;
+
+	/* Mask state */
+	unsigned int dp_write_mask;
+	unsigned int sten_ref_mask_c;
+	unsigned int plane_3d_mask_c;
+
+	/* Window state */
+	unsigned int window_xy_offset;
+
+	/* Core state */
+	unsigned int scale_3d_cntl;
+} drm_r128_context_regs_t;
+
+/* Setup registers for each texture unit
+ */
+typedef struct {
+	unsigned int tex_cntl;
+	unsigned int tex_combine_cntl;
+	unsigned int tex_size_pitch;
+	unsigned int tex_offset[R128_MAX_TEXTURE_LEVELS];
+	unsigned int tex_border_color;
+} drm_r128_texture_regs_t;
+
+typedef struct drm_r128_sarea {
+	/* The channel for communication of state information to the kernel
+	 * on firing a vertex buffer.
+	 */
+	drm_r128_context_regs_t context_state;
+	drm_r128_texture_regs_t tex_state[R128_MAX_TEXTURE_UNITS];
+	unsigned int dirty;
+	unsigned int vertsize;
+	unsigned int vc_format;
+
+	/* The current cliprects, or a subset thereof.
+	 */
+	struct drm_clip_rect boxes[R128_NR_SAREA_CLIPRECTS];
+	unsigned int nbox;
+
+	/* Counters for client-side throttling of rendering clients.
+	 */
+	unsigned int last_frame;
+	unsigned int last_dispatch;
+
+	struct drm_tex_region tex_list[R128_NR_TEX_HEAPS][R128_NR_TEX_REGIONS + 1];
+	unsigned int tex_age[R128_NR_TEX_HEAPS];
+	int ctx_owner;
+	int pfAllowPageFlip;	/* number of 3d windows (0,1,2 or more) */
+	int pfCurrentPage;	/* which buffer is being displayed? */
+} drm_r128_sarea_t;
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (xf86drmR128.h)
+ */
+
+/* Rage 128 specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_R128_INIT       0x00
+#define DRM_R128_CCE_START  0x01
+#define DRM_R128_CCE_STOP   0x02
+#define DRM_R128_CCE_RESET  0x03
+#define DRM_R128_CCE_IDLE   0x04
+/* 0x05 not used */
+#define DRM_R128_RESET      0x06
+#define DRM_R128_SWAP       0x07
+#define DRM_R128_CLEAR      0x08
+#define DRM_R128_VERTEX     0x09
+#define DRM_R128_INDICES    0x0a
+#define DRM_R128_BLIT       0x0b
+#define DRM_R128_DEPTH      0x0c
+#define DRM_R128_STIPPLE    0x0d
+/* 0x0e not used */
+#define DRM_R128_INDIRECT   0x0f
+#define DRM_R128_FULLSCREEN 0x10
+#define DRM_R128_CLEAR2     0x11
+#define DRM_R128_GETPARAM   0x12
+#define DRM_R128_FLIP       0x13
+
+#define DRM_IOCTL_R128_INIT       DRM_IOW( DRM_COMMAND_BASE + DRM_R128_INIT, drm_r128_init_t)
+#define DRM_IOCTL_R128_CCE_START  DRM_IO(  DRM_COMMAND_BASE + DRM_R128_CCE_START)
+#define DRM_IOCTL_R128_CCE_STOP   DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CCE_STOP, drm_r128_cce_stop_t)
+#define DRM_IOCTL_R128_CCE_RESET  DRM_IO(  DRM_COMMAND_BASE + DRM_R128_CCE_RESET)
+#define DRM_IOCTL_R128_CCE_IDLE   DRM_IO(  DRM_COMMAND_BASE + DRM_R128_CCE_IDLE)
+/* 0x05 not used */
+#define DRM_IOCTL_R128_RESET      DRM_IO(  DRM_COMMAND_BASE + DRM_R128_RESET)
+#define DRM_IOCTL_R128_SWAP       DRM_IO(  DRM_COMMAND_BASE + DRM_R128_SWAP)
+#define DRM_IOCTL_R128_CLEAR      DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CLEAR, drm_r128_clear_t)
+#define DRM_IOCTL_R128_VERTEX     DRM_IOW( DRM_COMMAND_BASE + DRM_R128_VERTEX, drm_r128_vertex_t)
+#define DRM_IOCTL_R128_INDICES    DRM_IOW( DRM_COMMAND_BASE + DRM_R128_INDICES, drm_r128_indices_t)
+#define DRM_IOCTL_R128_BLIT       DRM_IOW( DRM_COMMAND_BASE + DRM_R128_BLIT, drm_r128_blit_t)
+#define DRM_IOCTL_R128_DEPTH      DRM_IOW( DRM_COMMAND_BASE + DRM_R128_DEPTH, drm_r128_depth_t)
+#define DRM_IOCTL_R128_STIPPLE    DRM_IOW( DRM_COMMAND_BASE + DRM_R128_STIPPLE, drm_r128_stipple_t)
+/* 0x0e not used */
+#define DRM_IOCTL_R128_INDIRECT   DRM_IOWR(DRM_COMMAND_BASE + DRM_R128_INDIRECT, drm_r128_indirect_t)
+#define DRM_IOCTL_R128_FULLSCREEN DRM_IOW( DRM_COMMAND_BASE + DRM_R128_FULLSCREEN, drm_r128_fullscreen_t)
+#define DRM_IOCTL_R128_CLEAR2     DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CLEAR2, drm_r128_clear2_t)
+#define DRM_IOCTL_R128_GETPARAM   DRM_IOWR( DRM_COMMAND_BASE + DRM_R128_GETPARAM, drm_r128_getparam_t)
+#define DRM_IOCTL_R128_FLIP       DRM_IO(  DRM_COMMAND_BASE + DRM_R128_FLIP)
+
+typedef struct drm_r128_init {
+	enum {
+		R128_INIT_CCE = 0x01,
+		R128_CLEANUP_CCE = 0x02
+	} func;
+	unsigned long sarea_priv_offset;
+	int is_pci;
+	int cce_mode;
+	int cce_secure;
+	int ring_size;
+	int usec_timeout;
+
+	unsigned int fb_bpp;
+	unsigned int front_offset, front_pitch;
+	unsigned int back_offset, back_pitch;
+	unsigned int depth_bpp;
+	unsigned int depth_offset, depth_pitch;
+	unsigned int span_offset;
+
+	unsigned long fb_offset;
+	unsigned long mmio_offset;
+	unsigned long ring_offset;
+	unsigned long ring_rptr_offset;
+	unsigned long buffers_offset;
+	unsigned long agp_textures_offset;
+} drm_r128_init_t;
+
+typedef struct drm_r128_cce_stop {
+	int flush;
+	int idle;
+} drm_r128_cce_stop_t;
+
+typedef struct drm_r128_clear {
+	unsigned int flags;
+	unsigned int clear_color;
+	unsigned int clear_depth;
+	unsigned int color_mask;
+	unsigned int depth_mask;
+} drm_r128_clear_t;
+
+typedef struct drm_r128_vertex {
+	int prim;
+	int idx;		/* Index of vertex buffer */
+	int count;		/* Number of vertices in buffer */
+	int discard;		/* Client finished with buffer? */
+} drm_r128_vertex_t;
+
+typedef struct drm_r128_indices {
+	int prim;
+	int idx;
+	int start;
+	int end;
+	int discard;		/* Client finished with buffer? */
+} drm_r128_indices_t;
+
+typedef struct drm_r128_blit {
+	int idx;
+	int pitch;
+	int offset;
+	int format;
+	unsigned short x, y;
+	unsigned short width, height;
+} drm_r128_blit_t;
+
+typedef struct drm_r128_depth {
+	enum {
+		R128_WRITE_SPAN = 0x01,
+		R128_WRITE_PIXELS = 0x02,
+		R128_READ_SPAN = 0x03,
+		R128_READ_PIXELS = 0x04
+	} func;
+	int n;
+	int *x;
+	int *y;
+	unsigned int *buffer;
+	unsigned char *mask;
+} drm_r128_depth_t;
+
+typedef struct drm_r128_stipple {
+	unsigned int *mask;
+} drm_r128_stipple_t;
+
+typedef struct drm_r128_indirect {
+	int idx;
+	int start;
+	int end;
+	int discard;
+} drm_r128_indirect_t;
+
+typedef struct drm_r128_fullscreen {
+	enum {
+		R128_INIT_FULLSCREEN = 0x01,
+		R128_CLEANUP_FULLSCREEN = 0x02
+	} func;
+} drm_r128_fullscreen_t;
+
+/* 2.3: An ioctl to get parameters that aren't available to the 3d
+ * client any other way.
+ */
+#define R128_PARAM_IRQ_NR            1
+
+typedef struct drm_r128_getparam {
+	int param;
+	void *value;
+} drm_r128_getparam_t;
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
new file mode 100644
index 0000000..a1e385d
--- /dev/null
+++ b/include/drm/radeon_drm.h
@@ -0,0 +1,1079 @@
+/* radeon_drm.h -- Public header for the radeon driver -*- linux-c -*-
+ *
+ * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Fremont, California.
+ * Copyright 2002 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Kevin E. Martin <martin@valinux.com>
+ *    Gareth Hughes <gareth@valinux.com>
+ *    Keith Whitwell <keith@tungstengraphics.com>
+ */
+
+#ifndef __RADEON_DRM_H__
+#define __RADEON_DRM_H__
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the X server file (radeon_sarea.h)
+ */
+#ifndef __RADEON_SAREA_DEFINES__
+#define __RADEON_SAREA_DEFINES__
+
+/* Old style state flags, required for sarea interface (1.1 and 1.2
+ * clears) and 1.2 drm_vertex2 ioctl.
+ */
+#define RADEON_UPLOAD_CONTEXT		0x00000001
+#define RADEON_UPLOAD_VERTFMT		0x00000002
+#define RADEON_UPLOAD_LINE		0x00000004
+#define RADEON_UPLOAD_BUMPMAP		0x00000008
+#define RADEON_UPLOAD_MASKS		0x00000010
+#define RADEON_UPLOAD_VIEWPORT		0x00000020
+#define RADEON_UPLOAD_SETUP		0x00000040
+#define RADEON_UPLOAD_TCL		0x00000080
+#define RADEON_UPLOAD_MISC		0x00000100
+#define RADEON_UPLOAD_TEX0		0x00000200
+#define RADEON_UPLOAD_TEX1		0x00000400
+#define RADEON_UPLOAD_TEX2		0x00000800
+#define RADEON_UPLOAD_TEX0IMAGES	0x00001000
+#define RADEON_UPLOAD_TEX1IMAGES	0x00002000
+#define RADEON_UPLOAD_TEX2IMAGES	0x00004000
+#define RADEON_UPLOAD_CLIPRECTS		0x00008000	/* handled client-side */
+#define RADEON_REQUIRE_QUIESCENCE	0x00010000
+#define RADEON_UPLOAD_ZBIAS		0x00020000	/* version 1.2 and newer */
+#define RADEON_UPLOAD_ALL		0x003effff
+#define RADEON_UPLOAD_CONTEXT_ALL       0x003e01ff
+
+/* New style per-packet identifiers for use in cmd_buffer ioctl with
+ * the RADEON_EMIT_PACKET command.  Comments relate new packets to old
+ * state bits and the packet size:
+ */
+#define RADEON_EMIT_PP_MISC                         0	/* context/7 */
+#define RADEON_EMIT_PP_CNTL                         1	/* context/3 */
+#define RADEON_EMIT_RB3D_COLORPITCH                 2	/* context/1 */
+#define RADEON_EMIT_RE_LINE_PATTERN                 3	/* line/2 */
+#define RADEON_EMIT_SE_LINE_WIDTH                   4	/* line/1 */
+#define RADEON_EMIT_PP_LUM_MATRIX                   5	/* bumpmap/1 */
+#define RADEON_EMIT_PP_ROT_MATRIX_0                 6	/* bumpmap/2 */
+#define RADEON_EMIT_RB3D_STENCILREFMASK             7	/* masks/3 */
+#define RADEON_EMIT_SE_VPORT_XSCALE                 8	/* viewport/6 */
+#define RADEON_EMIT_SE_CNTL                         9	/* setup/2 */
+#define RADEON_EMIT_SE_CNTL_STATUS                  10	/* setup/1 */
+#define RADEON_EMIT_RE_MISC                         11	/* misc/1 */
+#define RADEON_EMIT_PP_TXFILTER_0                   12	/* tex0/6 */
+#define RADEON_EMIT_PP_BORDER_COLOR_0               13	/* tex0/1 */
+#define RADEON_EMIT_PP_TXFILTER_1                   14	/* tex1/6 */
+#define RADEON_EMIT_PP_BORDER_COLOR_1               15	/* tex1/1 */
+#define RADEON_EMIT_PP_TXFILTER_2                   16	/* tex2/6 */
+#define RADEON_EMIT_PP_BORDER_COLOR_2               17	/* tex2/1 */
+#define RADEON_EMIT_SE_ZBIAS_FACTOR                 18	/* zbias/2 */
+#define RADEON_EMIT_SE_TCL_OUTPUT_VTX_FMT           19	/* tcl/11 */
+#define RADEON_EMIT_SE_TCL_MATERIAL_EMMISSIVE_RED   20	/* material/17 */
+#define R200_EMIT_PP_TXCBLEND_0                     21	/* tex0/4 */
+#define R200_EMIT_PP_TXCBLEND_1                     22	/* tex1/4 */
+#define R200_EMIT_PP_TXCBLEND_2                     23	/* tex2/4 */
+#define R200_EMIT_PP_TXCBLEND_3                     24	/* tex3/4 */
+#define R200_EMIT_PP_TXCBLEND_4                     25	/* tex4/4 */
+#define R200_EMIT_PP_TXCBLEND_5                     26	/* tex5/4 */
+#define R200_EMIT_PP_TXCBLEND_6                     27	/* /4 */
+#define R200_EMIT_PP_TXCBLEND_7                     28	/* /4 */
+#define R200_EMIT_TCL_LIGHT_MODEL_CTL_0             29	/* tcl/7 */
+#define R200_EMIT_TFACTOR_0                         30	/* tf/7 */
+#define R200_EMIT_VTX_FMT_0                         31	/* vtx/5 */
+#define R200_EMIT_VAP_CTL                           32	/* vap/1 */
+#define R200_EMIT_MATRIX_SELECT_0                   33	/* msl/5 */
+#define R200_EMIT_TEX_PROC_CTL_2                    34	/* tcg/5 */
+#define R200_EMIT_TCL_UCP_VERT_BLEND_CTL            35	/* tcl/1 */
+#define R200_EMIT_PP_TXFILTER_0                     36	/* tex0/6 */
+#define R200_EMIT_PP_TXFILTER_1                     37	/* tex1/6 */
+#define R200_EMIT_PP_TXFILTER_2                     38	/* tex2/6 */
+#define R200_EMIT_PP_TXFILTER_3                     39	/* tex3/6 */
+#define R200_EMIT_PP_TXFILTER_4                     40	/* tex4/6 */
+#define R200_EMIT_PP_TXFILTER_5                     41	/* tex5/6 */
+#define R200_EMIT_PP_TXOFFSET_0                     42	/* tex0/1 */
+#define R200_EMIT_PP_TXOFFSET_1                     43	/* tex1/1 */
+#define R200_EMIT_PP_TXOFFSET_2                     44	/* tex2/1 */
+#define R200_EMIT_PP_TXOFFSET_3                     45	/* tex3/1 */
+#define R200_EMIT_PP_TXOFFSET_4                     46	/* tex4/1 */
+#define R200_EMIT_PP_TXOFFSET_5                     47	/* tex5/1 */
+#define R200_EMIT_VTE_CNTL                          48	/* vte/1 */
+#define R200_EMIT_OUTPUT_VTX_COMP_SEL               49	/* vtx/1 */
+#define R200_EMIT_PP_TAM_DEBUG3                     50	/* tam/1 */
+#define R200_EMIT_PP_CNTL_X                         51	/* cst/1 */
+#define R200_EMIT_RB3D_DEPTHXY_OFFSET               52	/* cst/1 */
+#define R200_EMIT_RE_AUX_SCISSOR_CNTL               53	/* cst/1 */
+#define R200_EMIT_RE_SCISSOR_TL_0                   54	/* cst/2 */
+#define R200_EMIT_RE_SCISSOR_TL_1                   55	/* cst/2 */
+#define R200_EMIT_RE_SCISSOR_TL_2                   56	/* cst/2 */
+#define R200_EMIT_SE_VAP_CNTL_STATUS                57	/* cst/1 */
+#define R200_EMIT_SE_VTX_STATE_CNTL                 58	/* cst/1 */
+#define R200_EMIT_RE_POINTSIZE                      59	/* cst/1 */
+#define R200_EMIT_TCL_INPUT_VTX_VECTOR_ADDR_0       60	/* cst/4 */
+#define R200_EMIT_PP_CUBIC_FACES_0                  61
+#define R200_EMIT_PP_CUBIC_OFFSETS_0                62
+#define R200_EMIT_PP_CUBIC_FACES_1                  63
+#define R200_EMIT_PP_CUBIC_OFFSETS_1                64
+#define R200_EMIT_PP_CUBIC_FACES_2                  65
+#define R200_EMIT_PP_CUBIC_OFFSETS_2                66
+#define R200_EMIT_PP_CUBIC_FACES_3                  67
+#define R200_EMIT_PP_CUBIC_OFFSETS_3                68
+#define R200_EMIT_PP_CUBIC_FACES_4                  69
+#define R200_EMIT_PP_CUBIC_OFFSETS_4                70
+#define R200_EMIT_PP_CUBIC_FACES_5                  71
+#define R200_EMIT_PP_CUBIC_OFFSETS_5                72
+#define RADEON_EMIT_PP_TEX_SIZE_0                   73
+#define RADEON_EMIT_PP_TEX_SIZE_1                   74
+#define RADEON_EMIT_PP_TEX_SIZE_2                   75
+#define R200_EMIT_RB3D_BLENDCOLOR                   76
+#define R200_EMIT_TCL_POINT_SPRITE_CNTL             77
+#define RADEON_EMIT_PP_CUBIC_FACES_0                78
+#define RADEON_EMIT_PP_CUBIC_OFFSETS_T0             79
+#define RADEON_EMIT_PP_CUBIC_FACES_1                80
+#define RADEON_EMIT_PP_CUBIC_OFFSETS_T1             81
+#define RADEON_EMIT_PP_CUBIC_FACES_2                82
+#define RADEON_EMIT_PP_CUBIC_OFFSETS_T2             83
+#define R200_EMIT_PP_TRI_PERF_CNTL                  84
+#define R200_EMIT_PP_AFS_0                          85
+#define R200_EMIT_PP_AFS_1                          86
+#define R200_EMIT_ATF_TFACTOR                       87
+#define R200_EMIT_PP_TXCTLALL_0                     88
+#define R200_EMIT_PP_TXCTLALL_1                     89
+#define R200_EMIT_PP_TXCTLALL_2                     90
+#define R200_EMIT_PP_TXCTLALL_3                     91
+#define R200_EMIT_PP_TXCTLALL_4                     92
+#define R200_EMIT_PP_TXCTLALL_5                     93
+#define R200_EMIT_VAP_PVS_CNTL                      94
+#define RADEON_MAX_STATE_PACKETS                    95
+
+/* Commands understood by cmd_buffer ioctl.  More can be added but
+ * obviously these can't be removed or changed:
+ */
+#define RADEON_CMD_PACKET      1	/* emit one of the register packets above */
+#define RADEON_CMD_SCALARS     2	/* emit scalar data */
+#define RADEON_CMD_VECTORS     3	/* emit vector data */
+#define RADEON_CMD_DMA_DISCARD 4	/* discard current dma buf */
+#define RADEON_CMD_PACKET3     5	/* emit hw packet */
+#define RADEON_CMD_PACKET3_CLIP 6	/* emit hw packet wrapped in cliprects */
+#define RADEON_CMD_SCALARS2     7	/* r200 stopgap */
+#define RADEON_CMD_WAIT         8	/* emit hw wait commands -- note:
+					 *  doesn't make the cpu wait, just
+					 *  the graphics hardware */
+#define RADEON_CMD_VECLINEAR	9       /* another r200 stopgap */
+
+typedef union {
+	int i;
+	struct {
+		unsigned char cmd_type, pad0, pad1, pad2;
+	} header;
+	struct {
+		unsigned char cmd_type, packet_id, pad0, pad1;
+	} packet;
+	struct {
+		unsigned char cmd_type, offset, stride, count;
+	} scalars;
+	struct {
+		unsigned char cmd_type, offset, stride, count;
+	} vectors;
+	struct {
+		unsigned char cmd_type, addr_lo, addr_hi, count;
+	} veclinear;
+	struct {
+		unsigned char cmd_type, buf_idx, pad0, pad1;
+	} dma;
+	struct {
+		unsigned char cmd_type, flags, pad0, pad1;
+	} wait;
+} drm_radeon_cmd_header_t;
+
+#define RADEON_WAIT_2D  0x1
+#define RADEON_WAIT_3D  0x2
+
+/* Allowed parameters for R300_CMD_PACKET3
+ */
+#define R300_CMD_PACKET3_CLEAR		0
+#define R300_CMD_PACKET3_RAW		1
+
+/* Commands understood by cmd_buffer ioctl for R300.
+ * The interface has not been stabilized, so some of these may be removed
+ * and eventually reordered before stabilization.
+ */
+#define R300_CMD_PACKET0		1
+#define R300_CMD_VPU			2	/* emit vertex program upload */
+#define R300_CMD_PACKET3		3	/* emit a packet3 */
+#define R300_CMD_END3D			4	/* emit sequence ending 3d rendering */
+#define R300_CMD_CP_DELAY		5
+#define R300_CMD_DMA_DISCARD		6
+#define R300_CMD_WAIT			7
+#	define R300_WAIT_2D		0x1
+#	define R300_WAIT_3D		0x2
+/* these two defines are DOING IT WRONG - however
+ * we have userspace which relies on using these.
+ * The wait interface is backwards compat new 
+ * code should use the NEW_WAIT defines below
+ * THESE ARE NOT BIT FIELDS
+ */
+#	define R300_WAIT_2D_CLEAN	0x3
+#	define R300_WAIT_3D_CLEAN	0x4
+
+#	define R300_NEW_WAIT_2D_3D	0x3
+#	define R300_NEW_WAIT_2D_2D_CLEAN	0x4
+#	define R300_NEW_WAIT_3D_3D_CLEAN	0x6
+#	define R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN	0x8
+
+#define R300_CMD_SCRATCH		8
+#define R300_CMD_R500FP                 9
+
+typedef union {
+	unsigned int u;
+	struct {
+		unsigned char cmd_type, pad0, pad1, pad2;
+	} header;
+	struct {
+		unsigned char cmd_type, count, reglo, reghi;
+	} packet0;
+	struct {
+		unsigned char cmd_type, count, adrlo, adrhi;
+	} vpu;
+	struct {
+		unsigned char cmd_type, packet, pad0, pad1;
+	} packet3;
+	struct {
+		unsigned char cmd_type, packet;
+		unsigned short count;	/* amount of packet2 to emit */
+	} delay;
+	struct {
+		unsigned char cmd_type, buf_idx, pad0, pad1;
+	} dma;
+	struct {
+		unsigned char cmd_type, flags, pad0, pad1;
+	} wait;
+	struct {
+		unsigned char cmd_type, reg, n_bufs, flags;
+	} scratch;
+	struct {
+		unsigned char cmd_type, count, adrlo, adrhi_flags;
+	} r500fp;
+} drm_r300_cmd_header_t;
+
+#define RADEON_FRONT			0x1
+#define RADEON_BACK			0x2
+#define RADEON_DEPTH			0x4
+#define RADEON_STENCIL			0x8
+#define RADEON_CLEAR_FASTZ		0x80000000
+#define RADEON_USE_HIERZ		0x40000000
+#define RADEON_USE_COMP_ZBUF		0x20000000
+
+#define R500FP_CONSTANT_TYPE  (1 << 1)
+#define R500FP_CONSTANT_CLAMP (1 << 2)
+
+/* Primitive types
+ */
+#define RADEON_POINTS			0x1
+#define RADEON_LINES			0x2
+#define RADEON_LINE_STRIP		0x3
+#define RADEON_TRIANGLES		0x4
+#define RADEON_TRIANGLE_FAN		0x5
+#define RADEON_TRIANGLE_STRIP		0x6
+
+/* Vertex/indirect buffer size
+ */
+#define RADEON_BUFFER_SIZE		65536
+
+/* Byte offsets for indirect buffer data
+ */
+#define RADEON_INDEX_PRIM_OFFSET	20
+
+#define RADEON_SCRATCH_REG_OFFSET	32
+
+#define R600_SCRATCH_REG_OFFSET         256
+
+#define RADEON_NR_SAREA_CLIPRECTS	12
+
+/* There are 2 heaps (local/GART).  Each region within a heap is a
+ * minimum of 64k, and there are at most 64 of them per heap.
+ */
+#define RADEON_LOCAL_TEX_HEAP		0
+#define RADEON_GART_TEX_HEAP		1
+#define RADEON_NR_TEX_HEAPS		2
+#define RADEON_NR_TEX_REGIONS		64
+#define RADEON_LOG_TEX_GRANULARITY	16
+
+#define RADEON_MAX_TEXTURE_LEVELS	12
+#define RADEON_MAX_TEXTURE_UNITS	3
+
+#define RADEON_MAX_SURFACES		8
+
+/* Blits have strict offset rules.  All blit offset must be aligned on
+ * a 1K-byte boundary.
+ */
+#define RADEON_OFFSET_SHIFT             10
+#define RADEON_OFFSET_ALIGN             (1 << RADEON_OFFSET_SHIFT)
+#define RADEON_OFFSET_MASK              (RADEON_OFFSET_ALIGN - 1)
+
+#endif				/* __RADEON_SAREA_DEFINES__ */
+
+typedef struct {
+	unsigned int red;
+	unsigned int green;
+	unsigned int blue;
+	unsigned int alpha;
+} radeon_color_regs_t;
+
+typedef struct {
+	/* Context state */
+	unsigned int pp_misc;	/* 0x1c14 */
+	unsigned int pp_fog_color;
+	unsigned int re_solid_color;
+	unsigned int rb3d_blendcntl;
+	unsigned int rb3d_depthoffset;
+	unsigned int rb3d_depthpitch;
+	unsigned int rb3d_zstencilcntl;
+
+	unsigned int pp_cntl;	/* 0x1c38 */
+	unsigned int rb3d_cntl;
+	unsigned int rb3d_coloroffset;
+	unsigned int re_width_height;
+	unsigned int rb3d_colorpitch;
+	unsigned int se_cntl;
+
+	/* Vertex format state */
+	unsigned int se_coord_fmt;	/* 0x1c50 */
+
+	/* Line state */
+	unsigned int re_line_pattern;	/* 0x1cd0 */
+	unsigned int re_line_state;
+
+	unsigned int se_line_width;	/* 0x1db8 */
+
+	/* Bumpmap state */
+	unsigned int pp_lum_matrix;	/* 0x1d00 */
+
+	unsigned int pp_rot_matrix_0;	/* 0x1d58 */
+	unsigned int pp_rot_matrix_1;
+
+	/* Mask state */
+	unsigned int rb3d_stencilrefmask;	/* 0x1d7c */
+	unsigned int rb3d_ropcntl;
+	unsigned int rb3d_planemask;
+
+	/* Viewport state */
+	unsigned int se_vport_xscale;	/* 0x1d98 */
+	unsigned int se_vport_xoffset;
+	unsigned int se_vport_yscale;
+	unsigned int se_vport_yoffset;
+	unsigned int se_vport_zscale;
+	unsigned int se_vport_zoffset;
+
+	/* Setup state */
+	unsigned int se_cntl_status;	/* 0x2140 */
+
+	/* Misc state */
+	unsigned int re_top_left;	/* 0x26c0 */
+	unsigned int re_misc;
+} drm_radeon_context_regs_t;
+
+typedef struct {
+	/* Zbias state */
+	unsigned int se_zbias_factor;	/* 0x1dac */
+	unsigned int se_zbias_constant;
+} drm_radeon_context2_regs_t;
+
+/* Setup registers for each texture unit
+ */
+typedef struct {
+	unsigned int pp_txfilter;
+	unsigned int pp_txformat;
+	unsigned int pp_txoffset;
+	unsigned int pp_txcblend;
+	unsigned int pp_txablend;
+	unsigned int pp_tfactor;
+	unsigned int pp_border_color;
+} drm_radeon_texture_regs_t;
+
+typedef struct {
+	unsigned int start;
+	unsigned int finish;
+	unsigned int prim:8;
+	unsigned int stateidx:8;
+	unsigned int numverts:16;	/* overloaded as offset/64 for elt prims */
+	unsigned int vc_format;	/* vertex format */
+} drm_radeon_prim_t;
+
+typedef struct {
+	drm_radeon_context_regs_t context;
+	drm_radeon_texture_regs_t tex[RADEON_MAX_TEXTURE_UNITS];
+	drm_radeon_context2_regs_t context2;
+	unsigned int dirty;
+} drm_radeon_state_t;
+
+typedef struct {
+	/* The channel for communication of state information to the
+	 * kernel on firing a vertex buffer with either of the
+	 * obsoleted vertex/index ioctls.
+	 */
+	drm_radeon_context_regs_t context_state;
+	drm_radeon_texture_regs_t tex_state[RADEON_MAX_TEXTURE_UNITS];
+	unsigned int dirty;
+	unsigned int vertsize;
+	unsigned int vc_format;
+
+	/* The current cliprects, or a subset thereof.
+	 */
+	struct drm_clip_rect boxes[RADEON_NR_SAREA_CLIPRECTS];
+	unsigned int nbox;
+
+	/* Counters for client-side throttling of rendering clients.
+	 */
+	unsigned int last_frame;
+	unsigned int last_dispatch;
+	unsigned int last_clear;
+
+	struct drm_tex_region tex_list[RADEON_NR_TEX_HEAPS][RADEON_NR_TEX_REGIONS +
+						       1];
+	unsigned int tex_age[RADEON_NR_TEX_HEAPS];
+	int ctx_owner;
+	int pfState;		/* number of 3d windows (0,1,2ormore) */
+	int pfCurrentPage;	/* which buffer is being displayed? */
+	int crtc2_base;		/* CRTC2 frame offset */
+	int tiling_enabled;	/* set by drm, read by 2d + 3d clients */
+} drm_radeon_sarea_t;
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (xf86drmRadeon.h)
+ *
+ * KW: actually it's illegal to change any of this (backwards compatibility).
+ */
+
+/* Radeon specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_RADEON_CP_INIT    0x00
+#define DRM_RADEON_CP_START   0x01
+#define DRM_RADEON_CP_STOP    0x02
+#define DRM_RADEON_CP_RESET   0x03
+#define DRM_RADEON_CP_IDLE    0x04
+#define DRM_RADEON_RESET      0x05
+#define DRM_RADEON_FULLSCREEN 0x06
+#define DRM_RADEON_SWAP       0x07
+#define DRM_RADEON_CLEAR      0x08
+#define DRM_RADEON_VERTEX     0x09
+#define DRM_RADEON_INDICES    0x0A
+#define DRM_RADEON_NOT_USED
+#define DRM_RADEON_STIPPLE    0x0C
+#define DRM_RADEON_INDIRECT   0x0D
+#define DRM_RADEON_TEXTURE    0x0E
+#define DRM_RADEON_VERTEX2    0x0F
+#define DRM_RADEON_CMDBUF     0x10
+#define DRM_RADEON_GETPARAM   0x11
+#define DRM_RADEON_FLIP       0x12
+#define DRM_RADEON_ALLOC      0x13
+#define DRM_RADEON_FREE       0x14
+#define DRM_RADEON_INIT_HEAP  0x15
+#define DRM_RADEON_IRQ_EMIT   0x16
+#define DRM_RADEON_IRQ_WAIT   0x17
+#define DRM_RADEON_CP_RESUME  0x18
+#define DRM_RADEON_SETPARAM   0x19
+#define DRM_RADEON_SURF_ALLOC 0x1a
+#define DRM_RADEON_SURF_FREE  0x1b
+/* KMS ioctl */
+#define DRM_RADEON_GEM_INFO		0x1c
+#define DRM_RADEON_GEM_CREATE		0x1d
+#define DRM_RADEON_GEM_MMAP		0x1e
+#define DRM_RADEON_GEM_PREAD		0x21
+#define DRM_RADEON_GEM_PWRITE		0x22
+#define DRM_RADEON_GEM_SET_DOMAIN	0x23
+#define DRM_RADEON_GEM_WAIT_IDLE	0x24
+#define DRM_RADEON_CS			0x26
+#define DRM_RADEON_INFO			0x27
+#define DRM_RADEON_GEM_SET_TILING	0x28
+#define DRM_RADEON_GEM_GET_TILING	0x29
+#define DRM_RADEON_GEM_BUSY		0x2a
+#define DRM_RADEON_GEM_VA		0x2b
+#define DRM_RADEON_GEM_OP		0x2c
+#define DRM_RADEON_GEM_USERPTR		0x2d
+
+#define DRM_IOCTL_RADEON_CP_INIT    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_INIT, drm_radeon_init_t)
+#define DRM_IOCTL_RADEON_CP_START   DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_CP_START)
+#define DRM_IOCTL_RADEON_CP_STOP    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_STOP, drm_radeon_cp_stop_t)
+#define DRM_IOCTL_RADEON_CP_RESET   DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_CP_RESET)
+#define DRM_IOCTL_RADEON_CP_IDLE    DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_CP_IDLE)
+#define DRM_IOCTL_RADEON_RESET      DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_RESET)
+#define DRM_IOCTL_RADEON_FULLSCREEN DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_FULLSCREEN, drm_radeon_fullscreen_t)
+#define DRM_IOCTL_RADEON_SWAP       DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_SWAP)
+#define DRM_IOCTL_RADEON_CLEAR      DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CLEAR, drm_radeon_clear_t)
+#define DRM_IOCTL_RADEON_VERTEX     DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_VERTEX, drm_radeon_vertex_t)
+#define DRM_IOCTL_RADEON_INDICES    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_INDICES, drm_radeon_indices_t)
+#define DRM_IOCTL_RADEON_STIPPLE    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_STIPPLE, drm_radeon_stipple_t)
+#define DRM_IOCTL_RADEON_INDIRECT   DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INDIRECT, drm_radeon_indirect_t)
+#define DRM_IOCTL_RADEON_TEXTURE    DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_TEXTURE, drm_radeon_texture_t)
+#define DRM_IOCTL_RADEON_VERTEX2    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_VERTEX2, drm_radeon_vertex2_t)
+#define DRM_IOCTL_RADEON_CMDBUF     DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CMDBUF, drm_radeon_cmd_buffer_t)
+#define DRM_IOCTL_RADEON_GETPARAM   DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GETPARAM, drm_radeon_getparam_t)
+#define DRM_IOCTL_RADEON_FLIP       DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_FLIP)
+#define DRM_IOCTL_RADEON_ALLOC      DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_ALLOC, drm_radeon_mem_alloc_t)
+#define DRM_IOCTL_RADEON_FREE       DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_FREE, drm_radeon_mem_free_t)
+#define DRM_IOCTL_RADEON_INIT_HEAP  DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_INIT_HEAP, drm_radeon_mem_init_heap_t)
+#define DRM_IOCTL_RADEON_IRQ_EMIT   DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_IRQ_EMIT, drm_radeon_irq_emit_t)
+#define DRM_IOCTL_RADEON_IRQ_WAIT   DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_IRQ_WAIT, drm_radeon_irq_wait_t)
+#define DRM_IOCTL_RADEON_CP_RESUME  DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_CP_RESUME)
+#define DRM_IOCTL_RADEON_SETPARAM   DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_SETPARAM, drm_radeon_setparam_t)
+#define DRM_IOCTL_RADEON_SURF_ALLOC DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_SURF_ALLOC, drm_radeon_surface_alloc_t)
+#define DRM_IOCTL_RADEON_SURF_FREE  DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_SURF_FREE, drm_radeon_surface_free_t)
+/* KMS */
+#define DRM_IOCTL_RADEON_GEM_INFO	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_INFO, struct drm_radeon_gem_info)
+#define DRM_IOCTL_RADEON_GEM_CREATE	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_CREATE, struct drm_radeon_gem_create)
+#define DRM_IOCTL_RADEON_GEM_MMAP	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_MMAP, struct drm_radeon_gem_mmap)
+#define DRM_IOCTL_RADEON_GEM_PREAD	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_PREAD, struct drm_radeon_gem_pread)
+#define DRM_IOCTL_RADEON_GEM_PWRITE	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_PWRITE, struct drm_radeon_gem_pwrite)
+#define DRM_IOCTL_RADEON_GEM_SET_DOMAIN	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_SET_DOMAIN, struct drm_radeon_gem_set_domain)
+#define DRM_IOCTL_RADEON_GEM_WAIT_IDLE	DRM_IOW(DRM_COMMAND_BASE + DRM_RADEON_GEM_WAIT_IDLE, struct drm_radeon_gem_wait_idle)
+#define DRM_IOCTL_RADEON_CS		DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_CS, struct drm_radeon_cs)
+#define DRM_IOCTL_RADEON_INFO		DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INFO, struct drm_radeon_info)
+#define DRM_IOCTL_RADEON_GEM_SET_TILING	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_SET_TILING, struct drm_radeon_gem_set_tiling)
+#define DRM_IOCTL_RADEON_GEM_GET_TILING	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_GET_TILING, struct drm_radeon_gem_get_tiling)
+#define DRM_IOCTL_RADEON_GEM_BUSY	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_BUSY, struct drm_radeon_gem_busy)
+#define DRM_IOCTL_RADEON_GEM_VA		DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_VA, struct drm_radeon_gem_va)
+#define DRM_IOCTL_RADEON_GEM_OP		DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_OP, struct drm_radeon_gem_op)
+#define DRM_IOCTL_RADEON_GEM_USERPTR	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_USERPTR, struct drm_radeon_gem_userptr)
+
+typedef struct drm_radeon_init {
+	enum {
+		RADEON_INIT_CP = 0x01,
+		RADEON_CLEANUP_CP = 0x02,
+		RADEON_INIT_R200_CP = 0x03,
+		RADEON_INIT_R300_CP = 0x04,
+		RADEON_INIT_R600_CP = 0x05
+	} func;
+	unsigned long sarea_priv_offset;
+	int is_pci;
+	int cp_mode;
+	int gart_size;
+	int ring_size;
+	int usec_timeout;
+
+	unsigned int fb_bpp;
+	unsigned int front_offset, front_pitch;
+	unsigned int back_offset, back_pitch;
+	unsigned int depth_bpp;
+	unsigned int depth_offset, depth_pitch;
+
+	unsigned long fb_offset;
+	unsigned long mmio_offset;
+	unsigned long ring_offset;
+	unsigned long ring_rptr_offset;
+	unsigned long buffers_offset;
+	unsigned long gart_textures_offset;
+} drm_radeon_init_t;
+
+typedef struct drm_radeon_cp_stop {
+	int flush;
+	int idle;
+} drm_radeon_cp_stop_t;
+
+typedef struct drm_radeon_fullscreen {
+	enum {
+		RADEON_INIT_FULLSCREEN = 0x01,
+		RADEON_CLEANUP_FULLSCREEN = 0x02
+	} func;
+} drm_radeon_fullscreen_t;
+
+#define CLEAR_X1	0
+#define CLEAR_Y1	1
+#define CLEAR_X2	2
+#define CLEAR_Y2	3
+#define CLEAR_DEPTH	4
+
+typedef union drm_radeon_clear_rect {
+	float f[5];
+	unsigned int ui[5];
+} drm_radeon_clear_rect_t;
+
+typedef struct drm_radeon_clear {
+	unsigned int flags;
+	unsigned int clear_color;
+	unsigned int clear_depth;
+	unsigned int color_mask;
+	unsigned int depth_mask;	/* misnamed field:  should be stencil */
+	drm_radeon_clear_rect_t *depth_boxes;
+} drm_radeon_clear_t;
+
+typedef struct drm_radeon_vertex {
+	int prim;
+	int idx;		/* Index of vertex buffer */
+	int count;		/* Number of vertices in buffer */
+	int discard;		/* Client finished with buffer? */
+} drm_radeon_vertex_t;
+
+typedef struct drm_radeon_indices {
+	int prim;
+	int idx;
+	int start;
+	int end;
+	int discard;		/* Client finished with buffer? */
+} drm_radeon_indices_t;
+
+/* v1.2 - obsoletes drm_radeon_vertex and drm_radeon_indices
+ *      - allows multiple primitives and state changes in a single ioctl
+ *      - supports driver change to emit native primitives
+ */
+typedef struct drm_radeon_vertex2 {
+	int idx;		/* Index of vertex buffer */
+	int discard;		/* Client finished with buffer? */
+	int nr_states;
+	drm_radeon_state_t *state;
+	int nr_prims;
+	drm_radeon_prim_t *prim;
+} drm_radeon_vertex2_t;
+
+/* v1.3 - obsoletes drm_radeon_vertex2
+ *      - allows arbitrarily large cliprect list
+ *      - allows updating of tcl packet, vector and scalar state
+ *      - allows memory-efficient description of state updates
+ *      - allows state to be emitted without a primitive
+ *           (for clears, ctx switches)
+ *      - allows more than one dma buffer to be referenced per ioctl
+ *      - supports tcl driver
+ *      - may be extended in future versions with new cmd types, packets
+ */
+typedef struct drm_radeon_cmd_buffer {
+	int bufsz;
+	char *buf;
+	int nbox;
+	struct drm_clip_rect *boxes;
+} drm_radeon_cmd_buffer_t;
+
+typedef struct drm_radeon_tex_image {
+	unsigned int x, y;	/* Blit coordinates */
+	unsigned int width, height;
+	const void *data;
+} drm_radeon_tex_image_t;
+
+typedef struct drm_radeon_texture {
+	unsigned int offset;
+	int pitch;
+	int format;
+	int width;		/* Texture image coordinates */
+	int height;
+	drm_radeon_tex_image_t *image;
+} drm_radeon_texture_t;
+
+typedef struct drm_radeon_stipple {
+	unsigned int *mask;
+} drm_radeon_stipple_t;
+
+typedef struct drm_radeon_indirect {
+	int idx;
+	int start;
+	int end;
+	int discard;
+} drm_radeon_indirect_t;
+
+/* enum for card type parameters */
+#define RADEON_CARD_PCI 0
+#define RADEON_CARD_AGP 1
+#define RADEON_CARD_PCIE 2
+
+/* 1.3: An ioctl to get parameters that aren't available to the 3d
+ * client any other way.
+ */
+#define RADEON_PARAM_GART_BUFFER_OFFSET    1	/* card offset of 1st GART buffer */
+#define RADEON_PARAM_LAST_FRAME            2
+#define RADEON_PARAM_LAST_DISPATCH         3
+#define RADEON_PARAM_LAST_CLEAR            4
+/* Added with DRM version 1.6. */
+#define RADEON_PARAM_IRQ_NR                5
+#define RADEON_PARAM_GART_BASE             6	/* card offset of GART base */
+/* Added with DRM version 1.8. */
+#define RADEON_PARAM_REGISTER_HANDLE       7	/* for drmMap() */
+#define RADEON_PARAM_STATUS_HANDLE         8
+#define RADEON_PARAM_SAREA_HANDLE          9
+#define RADEON_PARAM_GART_TEX_HANDLE       10
+#define RADEON_PARAM_SCRATCH_OFFSET        11
+#define RADEON_PARAM_CARD_TYPE             12
+#define RADEON_PARAM_VBLANK_CRTC           13   /* VBLANK CRTC */
+#define RADEON_PARAM_FB_LOCATION           14   /* FB location */
+#define RADEON_PARAM_NUM_GB_PIPES          15   /* num GB pipes */
+#define RADEON_PARAM_DEVICE_ID             16
+#define RADEON_PARAM_NUM_Z_PIPES           17   /* num Z pipes */
+
+typedef struct drm_radeon_getparam {
+	int param;
+	void *value;
+} drm_radeon_getparam_t;
+
+/* 1.6: Set up a memory manager for regions of shared memory:
+ */
+#define RADEON_MEM_REGION_GART 1
+#define RADEON_MEM_REGION_FB   2
+
+typedef struct drm_radeon_mem_alloc {
+	int region;
+	int alignment;
+	int size;
+	int *region_offset;	/* offset from start of fb or GART */
+} drm_radeon_mem_alloc_t;
+
+typedef struct drm_radeon_mem_free {
+	int region;
+	int region_offset;
+} drm_radeon_mem_free_t;
+
+typedef struct drm_radeon_mem_init_heap {
+	int region;
+	int size;
+	int start;
+} drm_radeon_mem_init_heap_t;
+
+/* 1.6: Userspace can request & wait on irq's:
+ */
+typedef struct drm_radeon_irq_emit {
+	int *irq_seq;
+} drm_radeon_irq_emit_t;
+
+typedef struct drm_radeon_irq_wait {
+	int irq_seq;
+} drm_radeon_irq_wait_t;
+
+/* 1.10: Clients tell the DRM where they think the framebuffer is located in
+ * the card's address space, via a new generic ioctl to set parameters
+ */
+
+typedef struct drm_radeon_setparam {
+	unsigned int param;
+	__s64 value;
+} drm_radeon_setparam_t;
+
+#define RADEON_SETPARAM_FB_LOCATION    1	/* determined framebuffer location */
+#define RADEON_SETPARAM_SWITCH_TILING  2	/* enable/disable color tiling */
+#define RADEON_SETPARAM_PCIGART_LOCATION 3	/* PCI Gart Location */
+#define RADEON_SETPARAM_NEW_MEMMAP 4		/* Use new memory map */
+#define RADEON_SETPARAM_PCIGART_TABLE_SIZE 5    /* PCI GART Table Size */
+#define RADEON_SETPARAM_VBLANK_CRTC 6           /* VBLANK CRTC */
+/* 1.14: Clients can allocate/free a surface
+ */
+typedef struct drm_radeon_surface_alloc {
+	unsigned int address;
+	unsigned int size;
+	unsigned int flags;
+} drm_radeon_surface_alloc_t;
+
+typedef struct drm_radeon_surface_free {
+	unsigned int address;
+} drm_radeon_surface_free_t;
+
+#define	DRM_RADEON_VBLANK_CRTC1		1
+#define	DRM_RADEON_VBLANK_CRTC2		2
+
+/*
+ * Kernel modesetting world below.
+ */
+#define RADEON_GEM_DOMAIN_CPU		0x1
+#define RADEON_GEM_DOMAIN_GTT		0x2
+#define RADEON_GEM_DOMAIN_VRAM		0x4
+
+struct drm_radeon_gem_info {
+	__u64	gart_size;
+	__u64	vram_size;
+	__u64	vram_visible;
+};
+
+#define RADEON_GEM_NO_BACKING_STORE	(1 << 0)
+#define RADEON_GEM_GTT_UC		(1 << 1)
+#define RADEON_GEM_GTT_WC		(1 << 2)
+/* BO is expected to be accessed by the CPU */
+#define RADEON_GEM_CPU_ACCESS		(1 << 3)
+/* CPU access is not expected to work for this BO */
+#define RADEON_GEM_NO_CPU_ACCESS	(1 << 4)
+
+struct drm_radeon_gem_create {
+	__u64	size;
+	__u64	alignment;
+	__u32	handle;
+	__u32	initial_domain;
+	__u32	flags;
+};
+
+/*
+ * This is not a reliable API and you should expect it to fail for any
+ * number of reasons and have fallback path that do not use userptr to
+ * perform any operation.
+ */
+#define RADEON_GEM_USERPTR_READONLY	(1 << 0)
+#define RADEON_GEM_USERPTR_ANONONLY	(1 << 1)
+#define RADEON_GEM_USERPTR_VALIDATE	(1 << 2)
+#define RADEON_GEM_USERPTR_REGISTER	(1 << 3)
+
+struct drm_radeon_gem_userptr {
+	__u64		addr;
+	__u64		size;
+	__u32		flags;
+	__u32		handle;
+};
+
+#define RADEON_TILING_MACRO				0x1
+#define RADEON_TILING_MICRO				0x2
+#define RADEON_TILING_SWAP_16BIT			0x4
+#define RADEON_TILING_R600_NO_SCANOUT                   RADEON_TILING_SWAP_16BIT
+#define RADEON_TILING_SWAP_32BIT			0x8
+/* this object requires a surface when mapped - i.e. front buffer */
+#define RADEON_TILING_SURFACE				0x10
+#define RADEON_TILING_MICRO_SQUARE			0x20
+#define RADEON_TILING_EG_BANKW_SHIFT			8
+#define RADEON_TILING_EG_BANKW_MASK			0xf
+#define RADEON_TILING_EG_BANKH_SHIFT			12
+#define RADEON_TILING_EG_BANKH_MASK			0xf
+#define RADEON_TILING_EG_MACRO_TILE_ASPECT_SHIFT	16
+#define RADEON_TILING_EG_MACRO_TILE_ASPECT_MASK		0xf
+#define RADEON_TILING_EG_TILE_SPLIT_SHIFT		24
+#define RADEON_TILING_EG_TILE_SPLIT_MASK		0xf
+#define RADEON_TILING_EG_STENCIL_TILE_SPLIT_SHIFT	28
+#define RADEON_TILING_EG_STENCIL_TILE_SPLIT_MASK	0xf
+
+struct drm_radeon_gem_set_tiling {
+	__u32	handle;
+	__u32	tiling_flags;
+	__u32	pitch;
+};
+
+struct drm_radeon_gem_get_tiling {
+	__u32	handle;
+	__u32	tiling_flags;
+	__u32	pitch;
+};
+
+struct drm_radeon_gem_mmap {
+	__u32	handle;
+	__u32	pad;
+	__u64	offset;
+	__u64	size;
+	__u64	addr_ptr;
+};
+
+struct drm_radeon_gem_set_domain {
+	__u32	handle;
+	__u32	read_domains;
+	__u32	write_domain;
+};
+
+struct drm_radeon_gem_wait_idle {
+	__u32	handle;
+	__u32	pad;
+};
+
+struct drm_radeon_gem_busy {
+	__u32	handle;
+	__u32        domain;
+};
+
+struct drm_radeon_gem_pread {
+	/** Handle for the object being read. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset into the object to read from */
+	__u64 offset;
+	/** Length of data to read */
+	__u64 size;
+	/** Pointer to write the data into. */
+	/* void *, but pointers are not 32/64 compatible */
+	__u64 data_ptr;
+};
+
+struct drm_radeon_gem_pwrite {
+	/** Handle for the object being written to. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset into the object to write to */
+	__u64 offset;
+	/** Length of data to write */
+	__u64 size;
+	/** Pointer to read the data from. */
+	/* void *, but pointers are not 32/64 compatible */
+	__u64 data_ptr;
+};
+
+/* Sets or returns a value associated with a buffer. */
+struct drm_radeon_gem_op {
+	__u32	handle; /* buffer */
+	__u32	op;     /* RADEON_GEM_OP_* */
+	__u64	value;  /* input or return value */
+};
+
+#define RADEON_GEM_OP_GET_INITIAL_DOMAIN	0
+#define RADEON_GEM_OP_SET_INITIAL_DOMAIN	1
+
+#define RADEON_VA_MAP			1
+#define RADEON_VA_UNMAP			2
+
+#define RADEON_VA_RESULT_OK		0
+#define RADEON_VA_RESULT_ERROR		1
+#define RADEON_VA_RESULT_VA_EXIST	2
+
+#define RADEON_VM_PAGE_VALID		(1 << 0)
+#define RADEON_VM_PAGE_READABLE		(1 << 1)
+#define RADEON_VM_PAGE_WRITEABLE	(1 << 2)
+#define RADEON_VM_PAGE_SYSTEM		(1 << 3)
+#define RADEON_VM_PAGE_SNOOPED		(1 << 4)
+
+struct drm_radeon_gem_va {
+	__u32		handle;
+	__u32		operation;
+	__u32		vm_id;
+	__u32		flags;
+	__u64		offset;
+};
+
+#define RADEON_CHUNK_ID_RELOCS	0x01
+#define RADEON_CHUNK_ID_IB	0x02
+#define RADEON_CHUNK_ID_FLAGS	0x03
+#define RADEON_CHUNK_ID_CONST_IB	0x04
+
+/* The first dword of RADEON_CHUNK_ID_FLAGS is a uint32 of these flags: */
+#define RADEON_CS_KEEP_TILING_FLAGS 0x01
+#define RADEON_CS_USE_VM            0x02
+#define RADEON_CS_END_OF_FRAME      0x04 /* a hint from userspace which CS is the last one */
+/* The second dword of RADEON_CHUNK_ID_FLAGS is a uint32 that sets the ring type */
+#define RADEON_CS_RING_GFX          0
+#define RADEON_CS_RING_COMPUTE      1
+#define RADEON_CS_RING_DMA          2
+#define RADEON_CS_RING_UVD          3
+#define RADEON_CS_RING_VCE          4
+/* The third dword of RADEON_CHUNK_ID_FLAGS is a sint32 that sets the priority */
+/* 0 = normal, + = higher priority, - = lower priority */
+
+struct drm_radeon_cs_chunk {
+	__u32		chunk_id;
+	__u32		length_dw;
+	__u64		chunk_data;
+};
+
+/* drm_radeon_cs_reloc.flags */
+#define RADEON_RELOC_PRIO_MASK		(0xf << 0)
+
+struct drm_radeon_cs_reloc {
+	__u32		handle;
+	__u32		read_domains;
+	__u32		write_domain;
+	__u32		flags;
+};
+
+struct drm_radeon_cs {
+	__u32		num_chunks;
+	__u32		cs_id;
+	/* this points to __u64 * which point to cs chunks */
+	__u64		chunks;
+	/* updates to the limits after this CS ioctl */
+	__u64		gart_limit;
+	__u64		vram_limit;
+};
+
+#define RADEON_INFO_DEVICE_ID		0x00
+#define RADEON_INFO_NUM_GB_PIPES	0x01
+#define RADEON_INFO_NUM_Z_PIPES 	0x02
+#define RADEON_INFO_ACCEL_WORKING	0x03
+#define RADEON_INFO_CRTC_FROM_ID	0x04
+#define RADEON_INFO_ACCEL_WORKING2	0x05
+#define RADEON_INFO_TILING_CONFIG	0x06
+#define RADEON_INFO_WANT_HYPERZ		0x07
+#define RADEON_INFO_WANT_CMASK		0x08 /* get access to CMASK on r300 */
+#define RADEON_INFO_CLOCK_CRYSTAL_FREQ	0x09 /* clock crystal frequency */
+#define RADEON_INFO_NUM_BACKENDS	0x0a /* DB/backends for r600+ - need for OQ */
+#define RADEON_INFO_NUM_TILE_PIPES	0x0b /* tile pipes for r600+ */
+#define RADEON_INFO_FUSION_GART_WORKING	0x0c /* fusion writes to GTT were broken before this */
+#define RADEON_INFO_BACKEND_MAP		0x0d /* pipe to backend map, needed by mesa */
+/* virtual address start, va < start are reserved by the kernel */
+#define RADEON_INFO_VA_START		0x0e
+/* maximum size of ib using the virtual memory cs */
+#define RADEON_INFO_IB_VM_MAX_SIZE	0x0f
+/* max pipes - needed for compute shaders */
+#define RADEON_INFO_MAX_PIPES		0x10
+/* timestamp for GL_ARB_timer_query (OpenGL), returns the current GPU clock */
+#define RADEON_INFO_TIMESTAMP		0x11
+/* max shader engines (SE) - needed for geometry shaders, etc. */
+#define RADEON_INFO_MAX_SE		0x12
+/* max SH per SE */
+#define RADEON_INFO_MAX_SH_PER_SE	0x13
+/* fast fb access is enabled */
+#define RADEON_INFO_FASTFB_WORKING	0x14
+/* query if a RADEON_CS_RING_* submission is supported */
+#define RADEON_INFO_RING_WORKING	0x15
+/* SI tile mode array */
+#define RADEON_INFO_SI_TILE_MODE_ARRAY	0x16
+/* query if CP DMA is supported on the compute ring */
+#define RADEON_INFO_SI_CP_DMA_COMPUTE	0x17
+/* CIK macrotile mode array */
+#define RADEON_INFO_CIK_MACROTILE_MODE_ARRAY	0x18
+/* query the number of render backends */
+#define RADEON_INFO_SI_BACKEND_ENABLED_MASK	0x19
+/* max engine clock - needed for OpenCL */
+#define RADEON_INFO_MAX_SCLK		0x1a
+/* version of VCE firmware */
+#define RADEON_INFO_VCE_FW_VERSION	0x1b
+/* version of VCE feedback */
+#define RADEON_INFO_VCE_FB_VERSION	0x1c
+#define RADEON_INFO_NUM_BYTES_MOVED	0x1d
+#define RADEON_INFO_VRAM_USAGE		0x1e
+#define RADEON_INFO_GTT_USAGE		0x1f
+#define RADEON_INFO_ACTIVE_CU_COUNT	0x20
+#define RADEON_INFO_CURRENT_GPU_TEMP	0x21
+#define RADEON_INFO_CURRENT_GPU_SCLK	0x22
+#define RADEON_INFO_CURRENT_GPU_MCLK	0x23
+#define RADEON_INFO_READ_REG		0x24
+#define RADEON_INFO_VA_UNMAP_WORKING	0x25
+#define RADEON_INFO_GPU_RESET_COUNTER	0x26
+
+struct drm_radeon_info {
+	__u32		request;
+	__u32		pad;
+	__u64		value;
+};
+
+/* Those correspond to the tile index to use, this is to explicitly state
+ * the API that is implicitly defined by the tile mode array.
+ */
+#define SI_TILE_MODE_COLOR_LINEAR_ALIGNED	8
+#define SI_TILE_MODE_COLOR_1D			13
+#define SI_TILE_MODE_COLOR_1D_SCANOUT		9
+#define SI_TILE_MODE_COLOR_2D_8BPP		14
+#define SI_TILE_MODE_COLOR_2D_16BPP		15
+#define SI_TILE_MODE_COLOR_2D_32BPP		16
+#define SI_TILE_MODE_COLOR_2D_64BPP		17
+#define SI_TILE_MODE_COLOR_2D_SCANOUT_16BPP	11
+#define SI_TILE_MODE_COLOR_2D_SCANOUT_32BPP	12
+#define SI_TILE_MODE_DEPTH_STENCIL_1D		4
+#define SI_TILE_MODE_DEPTH_STENCIL_2D		0
+#define SI_TILE_MODE_DEPTH_STENCIL_2D_2AA	3
+#define SI_TILE_MODE_DEPTH_STENCIL_2D_4AA	3
+#define SI_TILE_MODE_DEPTH_STENCIL_2D_8AA	2
+
+#define CIK_TILE_MODE_DEPTH_STENCIL_1D		5
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
diff --git a/include/drm/savage_drm.h b/include/drm/savage_drm.h
new file mode 100644
index 0000000..1a91234
--- /dev/null
+++ b/include/drm/savage_drm.h
@@ -0,0 +1,220 @@
+/* savage_drm.h -- Public header for the savage driver
+ *
+ * Copyright 2004  Felix Kuehling
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __SAVAGE_DRM_H__
+#define __SAVAGE_DRM_H__
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#ifndef __SAVAGE_SAREA_DEFINES__
+#define __SAVAGE_SAREA_DEFINES__
+
+/* 2 heaps (1 for card, 1 for agp), each divided into up to 128
+ * regions, subject to a minimum region size of (1<<16) == 64k.
+ *
+ * Clients may subdivide regions internally, but when sharing between
+ * clients, the region size is the minimum granularity.
+ */
+
+#define SAVAGE_CARD_HEAP		0
+#define SAVAGE_AGP_HEAP			1
+#define SAVAGE_NR_TEX_HEAPS		2
+#define SAVAGE_NR_TEX_REGIONS		16
+#define SAVAGE_LOG_MIN_TEX_REGION_SIZE	16
+
+#endif				/* __SAVAGE_SAREA_DEFINES__ */
+
+typedef struct _drm_savage_sarea {
+	/* LRU lists for texture memory in agp space and on the card.
+	 */
+	struct drm_tex_region texList[SAVAGE_NR_TEX_HEAPS][SAVAGE_NR_TEX_REGIONS +
+						      1];
+	unsigned int texAge[SAVAGE_NR_TEX_HEAPS];
+
+	/* Mechanism to validate card state.
+	 */
+	int ctxOwner;
+} drm_savage_sarea_t, *drm_savage_sarea_ptr;
+
+/* Savage-specific ioctls
+ */
+#define DRM_SAVAGE_BCI_INIT		0x00
+#define DRM_SAVAGE_BCI_CMDBUF           0x01
+#define DRM_SAVAGE_BCI_EVENT_EMIT	0x02
+#define DRM_SAVAGE_BCI_EVENT_WAIT	0x03
+
+#define DRM_IOCTL_SAVAGE_BCI_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_INIT, drm_savage_init_t)
+#define DRM_IOCTL_SAVAGE_BCI_CMDBUF		DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_CMDBUF, drm_savage_cmdbuf_t)
+#define DRM_IOCTL_SAVAGE_BCI_EVENT_EMIT	DRM_IOWR(DRM_COMMAND_BASE + DRM_SAVAGE_BCI_EVENT_EMIT, drm_savage_event_emit_t)
+#define DRM_IOCTL_SAVAGE_BCI_EVENT_WAIT	DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_EVENT_WAIT, drm_savage_event_wait_t)
+
+#define SAVAGE_DMA_PCI	1
+#define SAVAGE_DMA_AGP	3
+typedef struct drm_savage_init {
+	enum {
+		SAVAGE_INIT_BCI = 1,
+		SAVAGE_CLEANUP_BCI = 2
+	} func;
+	unsigned int sarea_priv_offset;
+
+	/* some parameters */
+	unsigned int cob_size;
+	unsigned int bci_threshold_lo, bci_threshold_hi;
+	unsigned int dma_type;
+
+	/* frame buffer layout */
+	unsigned int fb_bpp;
+	unsigned int front_offset, front_pitch;
+	unsigned int back_offset, back_pitch;
+	unsigned int depth_bpp;
+	unsigned int depth_offset, depth_pitch;
+
+	/* local textures */
+	unsigned int texture_offset;
+	unsigned int texture_size;
+
+	/* physical locations of non-permanent maps */
+	unsigned long status_offset;
+	unsigned long buffers_offset;
+	unsigned long agp_textures_offset;
+	unsigned long cmd_dma_offset;
+} drm_savage_init_t;
+
+typedef union drm_savage_cmd_header drm_savage_cmd_header_t;
+typedef struct drm_savage_cmdbuf {
+	/* command buffer in client's address space */
+	drm_savage_cmd_header_t *cmd_addr;
+	unsigned int size;	/* size of the command buffer in 64bit units */
+
+	unsigned int dma_idx;	/* DMA buffer index to use */
+	int discard;		/* discard DMA buffer when done */
+	/* vertex buffer in client's address space */
+	unsigned int *vb_addr;
+	unsigned int vb_size;	/* size of client vertex buffer in bytes */
+	unsigned int vb_stride;	/* stride of vertices in 32bit words */
+	/* boxes in client's address space */
+	struct drm_clip_rect *box_addr;
+	unsigned int nbox;	/* number of clipping boxes */
+} drm_savage_cmdbuf_t;
+
+#define SAVAGE_WAIT_2D  0x1	/* wait for 2D idle before updating event tag */
+#define SAVAGE_WAIT_3D  0x2	/* wait for 3D idle before updating event tag */
+#define SAVAGE_WAIT_IRQ 0x4	/* emit or wait for IRQ, not implemented yet */
+typedef struct drm_savage_event {
+	unsigned int count;
+	unsigned int flags;
+} drm_savage_event_emit_t, drm_savage_event_wait_t;
+
+/* Commands for the cmdbuf ioctl
+ */
+#define SAVAGE_CMD_STATE	0	/* a range of state registers */
+#define SAVAGE_CMD_DMA_PRIM	1	/* vertices from DMA buffer */
+#define SAVAGE_CMD_VB_PRIM	2	/* vertices from client vertex buffer */
+#define SAVAGE_CMD_DMA_IDX	3	/* indexed vertices from DMA buffer */
+#define SAVAGE_CMD_VB_IDX	4	/* indexed vertices client vertex buffer */
+#define SAVAGE_CMD_CLEAR	5	/* clear buffers */
+#define SAVAGE_CMD_SWAP		6	/* swap buffers */
+
+/* Primitive types
+*/
+#define SAVAGE_PRIM_TRILIST	0	/* triangle list */
+#define SAVAGE_PRIM_TRISTRIP	1	/* triangle strip */
+#define SAVAGE_PRIM_TRIFAN	2	/* triangle fan */
+#define SAVAGE_PRIM_TRILIST_201	3	/* reorder verts for correct flat
+					 * shading on s3d */
+
+/* Skip flags (vertex format)
+ */
+#define SAVAGE_SKIP_Z		0x01
+#define SAVAGE_SKIP_W		0x02
+#define SAVAGE_SKIP_C0		0x04
+#define SAVAGE_SKIP_C1		0x08
+#define SAVAGE_SKIP_S0		0x10
+#define SAVAGE_SKIP_T0		0x20
+#define SAVAGE_SKIP_ST0		0x30
+#define SAVAGE_SKIP_S1		0x40
+#define SAVAGE_SKIP_T1		0x80
+#define SAVAGE_SKIP_ST1		0xc0
+#define SAVAGE_SKIP_ALL_S3D	0x3f
+#define SAVAGE_SKIP_ALL_S4	0xff
+
+/* Buffer names for clear command
+ */
+#define SAVAGE_FRONT		0x1
+#define SAVAGE_BACK		0x2
+#define SAVAGE_DEPTH		0x4
+
+/* 64-bit command header
+ */
+union drm_savage_cmd_header {
+	struct {
+		unsigned char cmd;	/* command */
+		unsigned char pad0;
+		unsigned short pad1;
+		unsigned short pad2;
+		unsigned short pad3;
+	} cmd;			/* generic */
+	struct {
+		unsigned char cmd;
+		unsigned char global;	/* need idle engine? */
+		unsigned short count;	/* number of consecutive registers */
+		unsigned short start;	/* first register */
+		unsigned short pad3;
+	} state;		/* SAVAGE_CMD_STATE */
+	struct {
+		unsigned char cmd;
+		unsigned char prim;	/* primitive type */
+		unsigned short skip;	/* vertex format (skip flags) */
+		unsigned short count;	/* number of vertices */
+		unsigned short start;	/* first vertex in DMA/vertex buffer */
+	} prim;			/* SAVAGE_CMD_DMA_PRIM, SAVAGE_CMD_VB_PRIM */
+	struct {
+		unsigned char cmd;
+		unsigned char prim;
+		unsigned short skip;
+		unsigned short count;	/* number of indices that follow */
+		unsigned short pad3;
+	} idx;			/* SAVAGE_CMD_DMA_IDX, SAVAGE_CMD_VB_IDX */
+	struct {
+		unsigned char cmd;
+		unsigned char pad0;
+		unsigned short pad1;
+		unsigned int flags;
+	} clear0;		/* SAVAGE_CMD_CLEAR */
+	struct {
+		unsigned int mask;
+		unsigned int value;
+	} clear1;		/* SAVAGE_CMD_CLEAR data */
+};
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
diff --git a/include/drm/sis_drm.h b/include/drm/sis_drm.h
new file mode 100644
index 0000000..8e51bb9
--- /dev/null
+++ b/include/drm/sis_drm.h
@@ -0,0 +1,77 @@
+/* sis_drv.h -- Private header for sis driver -*- linux-c -*- */
+/*
+ * Copyright 2005 Eric Anholt
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#ifndef __SIS_DRM_H__
+#define __SIS_DRM_H__
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* SiS specific ioctls */
+#define NOT_USED_0_3
+#define DRM_SIS_FB_ALLOC	0x04
+#define DRM_SIS_FB_FREE	        0x05
+#define NOT_USED_6_12
+#define DRM_SIS_AGP_INIT	0x13
+#define DRM_SIS_AGP_ALLOC	0x14
+#define DRM_SIS_AGP_FREE	0x15
+#define DRM_SIS_FB_INIT	        0x16
+
+#define DRM_IOCTL_SIS_FB_ALLOC		DRM_IOWR(DRM_COMMAND_BASE + DRM_SIS_FB_ALLOC, drm_sis_mem_t)
+#define DRM_IOCTL_SIS_FB_FREE		DRM_IOW( DRM_COMMAND_BASE + DRM_SIS_FB_FREE, drm_sis_mem_t)
+#define DRM_IOCTL_SIS_AGP_INIT		DRM_IOWR(DRM_COMMAND_BASE + DRM_SIS_AGP_INIT, drm_sis_agp_t)
+#define DRM_IOCTL_SIS_AGP_ALLOC		DRM_IOWR(DRM_COMMAND_BASE + DRM_SIS_AGP_ALLOC, drm_sis_mem_t)
+#define DRM_IOCTL_SIS_AGP_FREE		DRM_IOW( DRM_COMMAND_BASE + DRM_SIS_AGP_FREE, drm_sis_mem_t)
+#define DRM_IOCTL_SIS_FB_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_SIS_FB_INIT, drm_sis_fb_t)
+/*
+#define DRM_IOCTL_SIS_FLIP		DRM_IOW( 0x48, drm_sis_flip_t)
+#define DRM_IOCTL_SIS_FLIP_INIT		DRM_IO(  0x49)
+#define DRM_IOCTL_SIS_FLIP_FINAL	DRM_IO(  0x50)
+*/
+
+typedef struct {
+	int context;
+	unsigned int offset;
+	unsigned int size;
+	unsigned long free;
+} drm_sis_mem_t;
+
+typedef struct {
+	unsigned int offset, size;
+} drm_sis_agp_t;
+
+typedef struct {
+	unsigned int offset, size;
+} drm_sis_fb_t;
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif				/* __SIS_DRM_H__ */
diff --git a/include/drm/tegra_drm.h b/include/drm/tegra_drm.h
new file mode 100644
index 0000000..94cfc30
--- /dev/null
+++ b/include/drm/tegra_drm.h
@@ -0,0 +1,1060 @@
+/* SPDX-License-Identifier: MIT */
+/* Copyright (c) 2012-2020 NVIDIA Corporation */
+
+#ifndef _UAPI_TEGRA_DRM_H_
+#define _UAPI_TEGRA_DRM_H_
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* Tegra DRM legacy UAPI. Only enabled with STAGING */
+
+#define DRM_TEGRA_GEM_CREATE_TILED     (1 << 0)
+#define DRM_TEGRA_GEM_CREATE_BOTTOM_UP (1 << 1)
+
+/**
+ * struct drm_tegra_gem_create - parameters for the GEM object creation IOCTL
+ */
+struct drm_tegra_gem_create {
+	/**
+	 * @size:
+	 *
+	 * The size, in bytes, of the buffer object to be created.
+	 */
+	__u64 size;
+
+	/**
+	 * @flags:
+	 *
+	 * A bitmask of flags that influence the creation of GEM objects:
+	 *
+	 * DRM_TEGRA_GEM_CREATE_TILED
+	 *   Use the 16x16 tiling format for this buffer.
+	 *
+	 * DRM_TEGRA_GEM_CREATE_BOTTOM_UP
+	 *   The buffer has a bottom-up layout.
+	 */
+	__u32 flags;
+
+	/**
+	 * @handle:
+	 *
+	 * The handle of the created GEM object. Set by the kernel upon
+	 * successful completion of the IOCTL.
+	 */
+	__u32 handle;
+};
+
+/**
+ * struct drm_tegra_gem_mmap - parameters for the GEM mmap IOCTL
+ */
+struct drm_tegra_gem_mmap {
+	/**
+	 * @handle:
+	 *
+	 * Handle of the GEM object to obtain an mmap offset for.
+	 */
+	__u32 handle;
+
+	/**
+	 * @pad:
+	 *
+	 * Structure padding that may be used in the future. Must be 0.
+	 */
+	__u32 pad;
+
+	/**
+	 * @offset:
+	 *
+	 * The mmap offset for the given GEM object. Set by the kernel upon
+	 * successful completion of the IOCTL.
+	 */
+	__u64 offset;
+};
+
+/**
+ * struct drm_tegra_syncpt_read - parameters for the read syncpoint IOCTL
+ */
+struct drm_tegra_syncpt_read {
+	/**
+	 * @id:
+	 *
+	 * ID of the syncpoint to read the current value from.
+	 */
+	__u32 id;
+
+	/**
+	 * @value:
+	 *
+	 * The current syncpoint value. Set by the kernel upon successful
+	 * completion of the IOCTL.
+	 */
+	__u32 value;
+};
+
+/**
+ * struct drm_tegra_syncpt_incr - parameters for the increment syncpoint IOCTL
+ */
+struct drm_tegra_syncpt_incr {
+	/**
+	 * @id:
+	 *
+	 * ID of the syncpoint to increment.
+	 */
+	__u32 id;
+
+	/**
+	 * @pad:
+	 *
+	 * Structure padding that may be used in the future. Must be 0.
+	 */
+	__u32 pad;
+};
+
+/**
+ * struct drm_tegra_syncpt_wait - parameters for the wait syncpoint IOCTL
+ */
+struct drm_tegra_syncpt_wait {
+	/**
+	 * @id:
+	 *
+	 * ID of the syncpoint to wait on.
+	 */
+	__u32 id;
+
+	/**
+	 * @thresh:
+	 *
+	 * Threshold value for which to wait.
+	 */
+	__u32 thresh;
+
+	/**
+	 * @timeout:
+	 *
+	 * Timeout, in milliseconds, to wait.
+	 */
+	__u32 timeout;
+
+	/**
+	 * @value:
+	 *
+	 * The new syncpoint value after the wait. Set by the kernel upon
+	 * successful completion of the IOCTL.
+	 */
+	__u32 value;
+};
+
+#define DRM_TEGRA_NO_TIMEOUT	(0xffffffff)
+
+/**
+ * struct drm_tegra_open_channel - parameters for the open channel IOCTL
+ */
+struct drm_tegra_open_channel {
+	/**
+	 * @client:
+	 *
+	 * The client ID for this channel.
+	 */
+	__u32 client;
+
+	/**
+	 * @pad:
+	 *
+	 * Structure padding that may be used in the future. Must be 0.
+	 */
+	__u32 pad;
+
+	/**
+	 * @context:
+	 *
+	 * The application context of this channel. Set by the kernel upon
+	 * successful completion of the IOCTL. This context needs to be passed
+	 * to the DRM_TEGRA_CHANNEL_CLOSE or the DRM_TEGRA_SUBMIT IOCTLs.
+	 */
+	__u64 context;
+};
+
+/**
+ * struct drm_tegra_close_channel - parameters for the close channel IOCTL
+ */
+struct drm_tegra_close_channel {
+	/**
+	 * @context:
+	 *
+	 * The application context of this channel. This is obtained from the
+	 * DRM_TEGRA_OPEN_CHANNEL IOCTL.
+	 */
+	__u64 context;
+};
+
+/**
+ * struct drm_tegra_get_syncpt - parameters for the get syncpoint IOCTL
+ */
+struct drm_tegra_get_syncpt {
+	/**
+	 * @context:
+	 *
+	 * The application context identifying the channel for which to obtain
+	 * the syncpoint ID.
+	 */
+	__u64 context;
+
+	/**
+	 * @index:
+	 *
+	 * Index of the client syncpoint for which to obtain the ID.
+	 */
+	__u32 index;
+
+	/**
+	 * @id:
+	 *
+	 * The ID of the given syncpoint. Set by the kernel upon successful
+	 * completion of the IOCTL.
+	 */
+	__u32 id;
+};
+
+/**
+ * struct drm_tegra_get_syncpt_base - parameters for the get wait base IOCTL
+ */
+struct drm_tegra_get_syncpt_base {
+	/**
+	 * @context:
+	 *
+	 * The application context identifying for which channel to obtain the
+	 * wait base.
+	 */
+	__u64 context;
+
+	/**
+	 * @syncpt:
+	 *
+	 * ID of the syncpoint for which to obtain the wait base.
+	 */
+	__u32 syncpt;
+
+	/**
+	 * @id:
+	 *
+	 * The ID of the wait base corresponding to the client syncpoint. Set
+	 * by the kernel upon successful completion of the IOCTL.
+	 */
+	__u32 id;
+};
+
+/**
+ * struct drm_tegra_syncpt - syncpoint increment operation
+ */
+struct drm_tegra_syncpt {
+	/**
+	 * @id:
+	 *
+	 * ID of the syncpoint to operate on.
+	 */
+	__u32 id;
+
+	/**
+	 * @incrs:
+	 *
+	 * Number of increments to perform for the syncpoint.
+	 */
+	__u32 incrs;
+};
+
+/**
+ * struct drm_tegra_cmdbuf - structure describing a command buffer
+ */
+struct drm_tegra_cmdbuf {
+	/**
+	 * @handle:
+	 *
+	 * Handle to a GEM object containing the command buffer.
+	 */
+	__u32 handle;
+
+	/**
+	 * @offset:
+	 *
+	 * Offset, in bytes, into the GEM object identified by @handle at
+	 * which the command buffer starts.
+	 */
+	__u32 offset;
+
+	/**
+	 * @words:
+	 *
+	 * Number of 32-bit words in this command buffer.
+	 */
+	__u32 words;
+
+	/**
+	 * @pad:
+	 *
+	 * Structure padding that may be used in the future. Must be 0.
+	 */
+	__u32 pad;
+};
+
+/**
+ * struct drm_tegra_reloc - GEM object relocation structure
+ */
+struct drm_tegra_reloc {
+	struct {
+		/**
+		 * @cmdbuf.handle:
+		 *
+		 * Handle to the GEM object containing the command buffer for
+		 * which to perform this GEM object relocation.
+		 */
+		__u32 handle;
+
+		/**
+		 * @cmdbuf.offset:
+		 *
+		 * Offset, in bytes, into the command buffer at which to
+		 * insert the relocated address.
+		 */
+		__u32 offset;
+	} cmdbuf;
+	struct {
+		/**
+		 * @target.handle:
+		 *
+		 * Handle to the GEM object to be relocated.
+		 */
+		__u32 handle;
+
+		/**
+		 * @target.offset:
+		 *
+		 * Offset, in bytes, into the target GEM object at which the
+		 * relocated data starts.
+		 */
+		__u32 offset;
+	} target;
+
+	/**
+	 * @shift:
+	 *
+	 * The number of bits by which to shift relocated addresses.
+	 */
+	__u32 shift;
+
+	/**
+	 * @pad:
+	 *
+	 * Structure padding that may be used in the future. Must be 0.
+	 */
+	__u32 pad;
+};
+
+/**
+ * struct drm_tegra_waitchk - wait check structure
+ */
+struct drm_tegra_waitchk {
+	/**
+	 * @handle:
+	 *
+	 * Handle to the GEM object containing a command stream on which to
+	 * perform the wait check.
+	 */
+	__u32 handle;
+
+	/**
+	 * @offset:
+	 *
+	 * Offset, in bytes, of the location in the command stream to perform
+	 * the wait check on.
+	 */
+	__u32 offset;
+
+	/**
+	 * @syncpt:
+	 *
+	 * ID of the syncpoint to wait check.
+	 */
+	__u32 syncpt;
+
+	/**
+	 * @thresh:
+	 *
+	 * Threshold value for which to check.
+	 */
+	__u32 thresh;
+};
+
+/**
+ * struct drm_tegra_submit - job submission structure
+ */
+struct drm_tegra_submit {
+	/**
+	 * @context:
+	 *
+	 * The application context identifying the channel to use for the
+	 * execution of this job.
+	 */
+	__u64 context;
+
+	/**
+	 * @num_syncpts:
+	 *
+	 * The number of syncpoints operated on by this job. This defines the
+	 * length of the array pointed to by @syncpts.
+	 */
+	__u32 num_syncpts;
+
+	/**
+	 * @num_cmdbufs:
+	 *
+	 * The number of command buffers to execute as part of this job. This
+	 * defines the length of the array pointed to by @cmdbufs.
+	 */
+	__u32 num_cmdbufs;
+
+	/**
+	 * @num_relocs:
+	 *
+	 * The number of relocations to perform before executing this job.
+	 * This defines the length of the array pointed to by @relocs.
+	 */
+	__u32 num_relocs;
+
+	/**
+	 * @num_waitchks:
+	 *
+	 * The number of wait checks to perform as part of this job. This
+	 * defines the length of the array pointed to by @waitchks.
+	 */
+	__u32 num_waitchks;
+
+	/**
+	 * @waitchk_mask:
+	 *
+	 * Bitmask of valid wait checks.
+	 */
+	__u32 waitchk_mask;
+
+	/**
+	 * @timeout:
+	 *
+	 * Timeout, in milliseconds, before this job is cancelled.
+	 */
+	__u32 timeout;
+
+	/**
+	 * @syncpts:
+	 *
+	 * A pointer to an array of &struct drm_tegra_syncpt structures that
+	 * specify the syncpoint operations performed as part of this job.
+	 * The number of elements in the array must be equal to the value
+	 * given by @num_syncpts.
+	 */
+	__u64 syncpts;
+
+	/**
+	 * @cmdbufs:
+	 *
+	 * A pointer to an array of &struct drm_tegra_cmdbuf structures that
+	 * define the command buffers to execute as part of this job. The
+	 * number of elements in the array must be equal to the value given
+	 * by @num_syncpts.
+	 */
+	__u64 cmdbufs;
+
+	/**
+	 * @relocs:
+	 *
+	 * A pointer to an array of &struct drm_tegra_reloc structures that
+	 * specify the relocations that need to be performed before executing
+	 * this job. The number of elements in the array must be equal to the
+	 * value given by @num_relocs.
+	 */
+	__u64 relocs;
+
+	/**
+	 * @waitchks:
+	 *
+	 * A pointer to an array of &struct drm_tegra_waitchk structures that
+	 * specify the wait checks to be performed while executing this job.
+	 * The number of elements in the array must be equal to the value
+	 * given by @num_waitchks.
+	 */
+	__u64 waitchks;
+
+	/**
+	 * @fence:
+	 *
+	 * The threshold of the syncpoint associated with this job after it
+	 * has been completed. Set by the kernel upon successful completion of
+	 * the IOCTL. This can be used with the DRM_TEGRA_SYNCPT_WAIT IOCTL to
+	 * wait for this job to be finished.
+	 */
+	__u32 fence;
+
+	/**
+	 * @reserved:
+	 *
+	 * This field is reserved for future use. Must be 0.
+	 */
+	__u32 reserved[5];
+};
+
+#define DRM_TEGRA_GEM_TILING_MODE_PITCH 0
+#define DRM_TEGRA_GEM_TILING_MODE_TILED 1
+#define DRM_TEGRA_GEM_TILING_MODE_BLOCK 2
+
+/**
+ * struct drm_tegra_gem_set_tiling - parameters for the set tiling IOCTL
+ */
+struct drm_tegra_gem_set_tiling {
+	/**
+	 * @handle:
+	 *
+	 * Handle to the GEM object for which to set the tiling parameters.
+	 */
+	__u32 handle;
+
+	/**
+	 * @mode:
+	 *
+	 * The tiling mode to set. Must be one of:
+	 *
+	 * DRM_TEGRA_GEM_TILING_MODE_PITCH
+	 *   pitch linear format
+	 *
+	 * DRM_TEGRA_GEM_TILING_MODE_TILED
+	 *   16x16 tiling format
+	 *
+	 * DRM_TEGRA_GEM_TILING_MODE_BLOCK
+	 *   16Bx2 tiling format
+	 */
+	__u32 mode;
+
+	/**
+	 * @value:
+	 *
+	 * The value to set for the tiling mode parameter.
+	 */
+	__u32 value;
+
+	/**
+	 * @pad:
+	 *
+	 * Structure padding that may be used in the future. Must be 0.
+	 */
+	__u32 pad;
+};
+
+/**
+ * struct drm_tegra_gem_get_tiling - parameters for the get tiling IOCTL
+ */
+struct drm_tegra_gem_get_tiling {
+	/**
+	 * @handle:
+	 *
+	 * Handle to the GEM object for which to query the tiling parameters.
+	 */
+	__u32 handle;
+
+	/**
+	 * @mode:
+	 *
+	 * The tiling mode currently associated with the GEM object. Set by
+	 * the kernel upon successful completion of the IOCTL.
+	 */
+	__u32 mode;
+
+	/**
+	 * @value:
+	 *
+	 * The tiling mode parameter currently associated with the GEM object.
+	 * Set by the kernel upon successful completion of the IOCTL.
+	 */
+	__u32 value;
+
+	/**
+	 * @pad:
+	 *
+	 * Structure padding that may be used in the future. Must be 0.
+	 */
+	__u32 pad;
+};
+
+#define DRM_TEGRA_GEM_BOTTOM_UP		(1 << 0)
+#define DRM_TEGRA_GEM_FLAGS		(DRM_TEGRA_GEM_BOTTOM_UP)
+
+/**
+ * struct drm_tegra_gem_set_flags - parameters for the set flags IOCTL
+ */
+struct drm_tegra_gem_set_flags {
+	/**
+	 * @handle:
+	 *
+	 * Handle to the GEM object for which to set the flags.
+	 */
+	__u32 handle;
+
+	/**
+	 * @flags:
+	 *
+	 * The flags to set for the GEM object.
+	 */
+	__u32 flags;
+};
+
+/**
+ * struct drm_tegra_gem_get_flags - parameters for the get flags IOCTL
+ */
+struct drm_tegra_gem_get_flags {
+	/**
+	 * @handle:
+	 *
+	 * Handle to the GEM object for which to query the flags.
+	 */
+	__u32 handle;
+
+	/**
+	 * @flags:
+	 *
+	 * The flags currently associated with the GEM object. Set by the
+	 * kernel upon successful completion of the IOCTL.
+	 */
+	__u32 flags;
+};
+
+#define DRM_TEGRA_GEM_CREATE		0x00
+#define DRM_TEGRA_GEM_MMAP		0x01
+#define DRM_TEGRA_SYNCPT_READ		0x02
+#define DRM_TEGRA_SYNCPT_INCR		0x03
+#define DRM_TEGRA_SYNCPT_WAIT		0x04
+#define DRM_TEGRA_OPEN_CHANNEL	        0x05
+#define DRM_TEGRA_CLOSE_CHANNEL	        0x06
+#define DRM_TEGRA_GET_SYNCPT		0x07
+#define DRM_TEGRA_SUBMIT		0x08
+#define DRM_TEGRA_GET_SYNCPT_BASE	0x09
+#define DRM_TEGRA_GEM_SET_TILING	0x0a
+#define DRM_TEGRA_GEM_GET_TILING	0x0b
+#define DRM_TEGRA_GEM_SET_FLAGS		0x0c
+#define DRM_TEGRA_GEM_GET_FLAGS		0x0d
+
+#define DRM_IOCTL_TEGRA_GEM_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_GEM_CREATE, struct drm_tegra_gem_create)
+#define DRM_IOCTL_TEGRA_GEM_MMAP DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_GEM_MMAP, struct drm_tegra_gem_mmap)
+#define DRM_IOCTL_TEGRA_SYNCPT_READ DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_SYNCPT_READ, struct drm_tegra_syncpt_read)
+#define DRM_IOCTL_TEGRA_SYNCPT_INCR DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_SYNCPT_INCR, struct drm_tegra_syncpt_incr)
+#define DRM_IOCTL_TEGRA_SYNCPT_WAIT DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_SYNCPT_WAIT, struct drm_tegra_syncpt_wait)
+#define DRM_IOCTL_TEGRA_OPEN_CHANNEL DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_OPEN_CHANNEL, struct drm_tegra_open_channel)
+#define DRM_IOCTL_TEGRA_CLOSE_CHANNEL DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_CLOSE_CHANNEL, struct drm_tegra_close_channel)
+#define DRM_IOCTL_TEGRA_GET_SYNCPT DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_GET_SYNCPT, struct drm_tegra_get_syncpt)
+#define DRM_IOCTL_TEGRA_SUBMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_SUBMIT, struct drm_tegra_submit)
+#define DRM_IOCTL_TEGRA_GET_SYNCPT_BASE DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_GET_SYNCPT_BASE, struct drm_tegra_get_syncpt_base)
+#define DRM_IOCTL_TEGRA_GEM_SET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_GEM_SET_TILING, struct drm_tegra_gem_set_tiling)
+#define DRM_IOCTL_TEGRA_GEM_GET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_GEM_GET_TILING, struct drm_tegra_gem_get_tiling)
+#define DRM_IOCTL_TEGRA_GEM_SET_FLAGS DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_GEM_SET_FLAGS, struct drm_tegra_gem_set_flags)
+#define DRM_IOCTL_TEGRA_GEM_GET_FLAGS DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_GEM_GET_FLAGS, struct drm_tegra_gem_get_flags)
+
+/* New Tegra DRM UAPI */
+
+/*
+ * Reported by the driver in the `capabilities` field.
+ *
+ * DRM_TEGRA_CHANNEL_CAP_CACHE_COHERENT: If set, the engine is cache coherent
+ * with regard to the system memory.
+ */
+#define DRM_TEGRA_CHANNEL_CAP_CACHE_COHERENT (1 << 0)
+
+struct drm_tegra_channel_open {
+	/**
+	 * @host1x_class: [in]
+	 *
+	 * Host1x class of the engine that will be programmed using this
+	 * channel.
+	 */
+	__u32 host1x_class;
+
+	/**
+	 * @flags: [in]
+	 *
+	 * Flags.
+	 */
+	__u32 flags;
+
+	/**
+	 * @context: [out]
+	 *
+	 * Opaque identifier corresponding to the opened channel.
+	 */
+	__u32 context;
+
+	/**
+	 * @version: [out]
+	 *
+	 * Version of the engine hardware. This can be used by userspace
+	 * to determine how the engine needs to be programmed.
+	 */
+	__u32 version;
+
+	/**
+	 * @capabilities: [out]
+	 *
+	 * Flags describing the hardware capabilities.
+	 */
+	__u32 capabilities;
+	__u32 padding;
+};
+
+struct drm_tegra_channel_close {
+	/**
+	 * @context: [in]
+	 *
+	 * Identifier of the channel to close.
+	 */
+	__u32 context;
+	__u32 padding;
+};
+
+/*
+ * Mapping flags that can be used to influence how the mapping is created.
+ *
+ * DRM_TEGRA_CHANNEL_MAP_READ: create mapping that allows HW read access
+ * DRM_TEGRA_CHANNEL_MAP_WRITE: create mapping that allows HW write access
+ */
+#define DRM_TEGRA_CHANNEL_MAP_READ  (1 << 0)
+#define DRM_TEGRA_CHANNEL_MAP_WRITE (1 << 1)
+#define DRM_TEGRA_CHANNEL_MAP_READ_WRITE (DRM_TEGRA_CHANNEL_MAP_READ | \
+					  DRM_TEGRA_CHANNEL_MAP_WRITE)
+
+struct drm_tegra_channel_map {
+	/**
+	 * @context: [in]
+	 *
+	 * Identifier of the channel to which make memory available for.
+	 */
+	__u32 context;
+
+	/**
+	 * @handle: [in]
+	 *
+	 * GEM handle of the memory to map.
+	 */
+	__u32 handle;
+
+	/**
+	 * @flags: [in]
+	 *
+	 * Flags.
+	 */
+	__u32 flags;
+
+	/**
+	 * @mapping: [out]
+	 *
+	 * Identifier corresponding to the mapping, to be used for
+	 * relocations or unmapping later.
+	 */
+	__u32 mapping;
+};
+
+struct drm_tegra_channel_unmap {
+	/**
+	 * @context: [in]
+	 *
+	 * Channel identifier of the channel to unmap memory from.
+	 */
+	__u32 context;
+
+	/**
+	 * @mapping: [in]
+	 *
+	 * Mapping identifier of the memory mapping to unmap.
+	 */
+	__u32 mapping;
+};
+
+/* Submission */
+
+/**
+ * Specify that bit 39 of the patched-in address should be set to switch
+ * swizzling between Tegra and non-Tegra sector layout on systems that store
+ * surfaces in system memory in non-Tegra sector layout.
+ */
+#define DRM_TEGRA_SUBMIT_RELOC_SECTOR_LAYOUT (1 << 0)
+
+struct drm_tegra_submit_buf {
+	/**
+	 * @mapping: [in]
+	 *
+	 * Identifier of the mapping to use in the submission.
+	 */
+	__u32 mapping;
+
+	/**
+	 * @flags: [in]
+	 *
+	 * Flags.
+	 */
+	__u32 flags;
+
+	/**
+	 * Information for relocation patching.
+	 */
+	struct {
+		/**
+		 * @target_offset: [in]
+		 *
+		 * Offset from the start of the mapping of the data whose
+		 * address is to be patched into the gather.
+		 */
+		__u64 target_offset;
+
+		/**
+		 * @gather_offset_words: [in]
+		 *
+		 * Offset in words from the start of the gather data to
+		 * where the address should be patched into.
+		 */
+		__u32 gather_offset_words;
+
+		/**
+		 * @shift: [in]
+		 *
+		 * Number of bits the address should be shifted right before
+		 * patching in.
+		 */
+		__u32 shift;
+	} reloc;
+};
+
+/**
+ * Execute `words` words of Host1x opcodes specified in the `gather_data_ptr`
+ * buffer. Each GATHER_UPTR command uses successive words from the buffer.
+ */
+#define DRM_TEGRA_SUBMIT_CMD_GATHER_UPTR		0
+/**
+ * Wait for a syncpoint to reach a value before continuing with further
+ * commands.
+ */
+#define DRM_TEGRA_SUBMIT_CMD_WAIT_SYNCPT		1
+/**
+ * Wait for a syncpoint to reach a value before continuing with further
+ * commands. The threshold is calculated relative to the start of the job.
+ */
+#define DRM_TEGRA_SUBMIT_CMD_WAIT_SYNCPT_RELATIVE	2
+
+struct drm_tegra_submit_cmd_gather_uptr {
+	__u32 words;
+	__u32 reserved[3];
+};
+
+struct drm_tegra_submit_cmd_wait_syncpt {
+	__u32 id;
+	__u32 value;
+	__u32 reserved[2];
+};
+
+struct drm_tegra_submit_cmd {
+	/**
+	 * @type: [in]
+	 *
+	 * Command type to execute. One of the DRM_TEGRA_SUBMIT_CMD*
+	 * defines.
+	 */
+	__u32 type;
+
+	/**
+	 * @flags: [in]
+	 *
+	 * Flags.
+	 */
+	__u32 flags;
+
+	union {
+		struct drm_tegra_submit_cmd_gather_uptr gather_uptr;
+		struct drm_tegra_submit_cmd_wait_syncpt wait_syncpt;
+		__u32 reserved[4];
+	};
+};
+
+struct drm_tegra_submit_syncpt {
+	/**
+	 * @id: [in]
+	 *
+	 * ID of the syncpoint that the job will increment.
+	 */
+	__u32 id;
+
+	/**
+	 * @flags: [in]
+	 *
+	 * Flags.
+	 */
+	__u32 flags;
+
+	/**
+	 * @increments: [in]
+	 *
+	 * Number of times the job will increment this syncpoint.
+	 */
+	__u32 increments;
+
+	/**
+	 * @value: [out]
+	 *
+	 * Value the syncpoint will have once the job has completed all
+	 * its specified syncpoint increments.
+	 *
+	 * Note that the kernel may increment the syncpoint before or after
+	 * the job. These increments are not reflected in this field.
+	 *
+	 * If the job hangs or times out, not all of the increments may
+	 * get executed.
+	 */
+	__u32 value;
+};
+
+struct drm_tegra_channel_submit {
+	/**
+	 * @context: [in]
+	 *
+	 * Identifier of the channel to submit this job to.
+	 */
+	__u32 context;
+
+	/**
+	 * @num_bufs: [in]
+	 *
+	 * Number of elements in the `bufs_ptr` array.
+	 */
+	__u32 num_bufs;
+
+	/**
+	 * @num_cmds: [in]
+	 *
+	 * Number of elements in the `cmds_ptr` array.
+	 */
+	__u32 num_cmds;
+
+	/**
+	 * @gather_data_words: [in]
+	 *
+	 * Number of 32-bit words in the `gather_data_ptr` array.
+	 */
+	__u32 gather_data_words;
+
+	/**
+	 * @bufs_ptr: [in]
+	 *
+	 * Pointer to an array of drm_tegra_submit_buf structures.
+	 */
+	__u64 bufs_ptr;
+
+	/**
+	 * @cmds_ptr: [in]
+	 *
+	 * Pointer to an array of drm_tegra_submit_cmd structures.
+	 */
+	__u64 cmds_ptr;
+
+	/**
+	 * @gather_data_ptr: [in]
+	 *
+	 * Pointer to an array of Host1x opcodes to be used by GATHER_UPTR
+	 * commands.
+	 */
+	__u64 gather_data_ptr;
+
+	/**
+	 * @syncobj_in: [in]
+	 *
+	 * Handle for DRM syncobj that will be waited before submission.
+	 * Ignored if zero.
+	 */
+	__u32 syncobj_in;
+
+	/**
+	 * @syncobj_out: [in]
+	 *
+	 * Handle for DRM syncobj that will have its fence replaced with
+	 * the job's completion fence. Ignored if zero.
+	 */
+	__u32 syncobj_out;
+
+	/**
+	 * @syncpt_incr: [in,out]
+	 *
+	 * Information about the syncpoint the job will increment.
+	 */
+	struct drm_tegra_submit_syncpt syncpt;
+};
+
+struct drm_tegra_syncpoint_allocate {
+	/**
+	 * @id: [out]
+	 *
+	 * ID of allocated syncpoint.
+	 */
+	__u32 id;
+	__u32 padding;
+};
+
+struct drm_tegra_syncpoint_free {
+	/**
+	 * @id: [in]
+	 *
+	 * ID of syncpoint to free.
+	 */
+	__u32 id;
+	__u32 padding;
+};
+
+struct drm_tegra_syncpoint_wait {
+	/**
+	 * @timeout: [in]
+	 *
+	 * Absolute timestamp at which the wait will time out.
+	 */
+	__s64 timeout_ns;
+
+	/**
+	 * @id: [in]
+	 *
+	 * ID of syncpoint to wait on.
+	 */
+	__u32 id;
+
+	/**
+	 * @threshold: [in]
+	 *
+	 * Threshold to wait for.
+	 */
+	__u32 threshold;
+
+	/**
+	 * @value: [out]
+	 *
+	 * Value of the syncpoint upon wait completion.
+	 */
+	__u32 value;
+
+	__u32 padding;
+};
+
+#define DRM_IOCTL_TEGRA_CHANNEL_OPEN DRM_IOWR(DRM_COMMAND_BASE + 0x10, struct drm_tegra_channel_open)
+#define DRM_IOCTL_TEGRA_CHANNEL_CLOSE DRM_IOWR(DRM_COMMAND_BASE + 0x11, struct drm_tegra_channel_close)
+#define DRM_IOCTL_TEGRA_CHANNEL_MAP DRM_IOWR(DRM_COMMAND_BASE + 0x12, struct drm_tegra_channel_map)
+#define DRM_IOCTL_TEGRA_CHANNEL_UNMAP DRM_IOWR(DRM_COMMAND_BASE + 0x13, struct drm_tegra_channel_unmap)
+#define DRM_IOCTL_TEGRA_CHANNEL_SUBMIT DRM_IOWR(DRM_COMMAND_BASE + 0x14, struct drm_tegra_channel_submit)
+
+#define DRM_IOCTL_TEGRA_SYNCPOINT_ALLOCATE DRM_IOWR(DRM_COMMAND_BASE + 0x20, struct drm_tegra_syncpoint_allocate)
+#define DRM_IOCTL_TEGRA_SYNCPOINT_FREE DRM_IOWR(DRM_COMMAND_BASE + 0x21, struct drm_tegra_syncpoint_free)
+#define DRM_IOCTL_TEGRA_SYNCPOINT_WAIT DRM_IOWR(DRM_COMMAND_BASE + 0x22, struct drm_tegra_syncpoint_wait)
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
diff --git a/include/drm/vc4_drm.h b/include/drm/vc4_drm.h
new file mode 100644
index 0000000..31f50de
--- /dev/null
+++ b/include/drm/vc4_drm.h
@@ -0,0 +1,442 @@
+/*
+ * Copyright © 2014-2015 Broadcom
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _VC4_DRM_H_
+#define _VC4_DRM_H_
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#define DRM_VC4_SUBMIT_CL                         0x00
+#define DRM_VC4_WAIT_SEQNO                        0x01
+#define DRM_VC4_WAIT_BO                           0x02
+#define DRM_VC4_CREATE_BO                         0x03
+#define DRM_VC4_MMAP_BO                           0x04
+#define DRM_VC4_CREATE_SHADER_BO                  0x05
+#define DRM_VC4_GET_HANG_STATE                    0x06
+#define DRM_VC4_GET_PARAM                         0x07
+#define DRM_VC4_SET_TILING                        0x08
+#define DRM_VC4_GET_TILING                        0x09
+#define DRM_VC4_LABEL_BO                          0x0a
+#define DRM_VC4_GEM_MADVISE                       0x0b
+#define DRM_VC4_PERFMON_CREATE                    0x0c
+#define DRM_VC4_PERFMON_DESTROY                   0x0d
+#define DRM_VC4_PERFMON_GET_VALUES                0x0e
+
+#define DRM_IOCTL_VC4_SUBMIT_CL           DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_SUBMIT_CL, struct drm_vc4_submit_cl)
+#define DRM_IOCTL_VC4_WAIT_SEQNO          DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_WAIT_SEQNO, struct drm_vc4_wait_seqno)
+#define DRM_IOCTL_VC4_WAIT_BO             DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_WAIT_BO, struct drm_vc4_wait_bo)
+#define DRM_IOCTL_VC4_CREATE_BO           DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_CREATE_BO, struct drm_vc4_create_bo)
+#define DRM_IOCTL_VC4_MMAP_BO             DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_MMAP_BO, struct drm_vc4_mmap_bo)
+#define DRM_IOCTL_VC4_CREATE_SHADER_BO    DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_CREATE_SHADER_BO, struct drm_vc4_create_shader_bo)
+#define DRM_IOCTL_VC4_GET_HANG_STATE      DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_GET_HANG_STATE, struct drm_vc4_get_hang_state)
+#define DRM_IOCTL_VC4_GET_PARAM           DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_GET_PARAM, struct drm_vc4_get_param)
+#define DRM_IOCTL_VC4_SET_TILING          DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_SET_TILING, struct drm_vc4_set_tiling)
+#define DRM_IOCTL_VC4_GET_TILING          DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_GET_TILING, struct drm_vc4_get_tiling)
+#define DRM_IOCTL_VC4_LABEL_BO            DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_LABEL_BO, struct drm_vc4_label_bo)
+#define DRM_IOCTL_VC4_GEM_MADVISE         DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_GEM_MADVISE, struct drm_vc4_gem_madvise)
+#define DRM_IOCTL_VC4_PERFMON_CREATE      DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_PERFMON_CREATE, struct drm_vc4_perfmon_create)
+#define DRM_IOCTL_VC4_PERFMON_DESTROY     DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_PERFMON_DESTROY, struct drm_vc4_perfmon_destroy)
+#define DRM_IOCTL_VC4_PERFMON_GET_VALUES  DRM_IOWR(DRM_COMMAND_BASE + DRM_VC4_PERFMON_GET_VALUES, struct drm_vc4_perfmon_get_values)
+
+struct drm_vc4_submit_rcl_surface {
+	__u32 hindex; /* Handle index, or ~0 if not present. */
+	__u32 offset; /* Offset to start of buffer. */
+	/*
+	 * Bits for either render config (color_write) or load/store packet.
+	 * Bits should all be 0 for MSAA load/stores.
+	 */
+	__u16 bits;
+
+#define VC4_SUBMIT_RCL_SURFACE_READ_IS_FULL_RES		(1 << 0)
+	__u16 flags;
+};
+
+/**
+ * struct drm_vc4_submit_cl - ioctl argument for submitting commands to the 3D
+ * engine.
+ *
+ * Drivers typically use GPU BOs to store batchbuffers / command lists and
+ * their associated state.  However, because the VC4 lacks an MMU, we have to
+ * do validation of memory accesses by the GPU commands.  If we were to store
+ * our commands in BOs, we'd need to do uncached readback from them to do the
+ * validation process, which is too expensive.  Instead, userspace accumulates
+ * commands and associated state in plain memory, then the kernel copies the
+ * data to its own address space, and then validates and stores it in a GPU
+ * BO.
+ */
+struct drm_vc4_submit_cl {
+	/* Pointer to the binner command list.
+	 *
+	 * This is the first set of commands executed, which runs the
+	 * coordinate shader to determine where primitives land on the screen,
+	 * then writes out the state updates and draw calls necessary per tile
+	 * to the tile allocation BO.
+	 */
+	__u64 bin_cl;
+
+	/* Pointer to the shader records.
+	 *
+	 * Shader records are the structures read by the hardware that contain
+	 * pointers to uniforms, shaders, and vertex attributes.  The
+	 * reference to the shader record has enough information to determine
+	 * how many pointers are necessary (fixed number for shaders/uniforms,
+	 * and an attribute count), so those BO indices into bo_handles are
+	 * just stored as __u32s before each shader record passed in.
+	 */
+	__u64 shader_rec;
+
+	/* Pointer to uniform data and texture handles for the textures
+	 * referenced by the shader.
+	 *
+	 * For each shader state record, there is a set of uniform data in the
+	 * order referenced by the record (FS, VS, then CS).  Each set of
+	 * uniform data has a __u32 index into bo_handles per texture
+	 * sample operation, in the order the QPU_W_TMUn_S writes appear in
+	 * the program.  Following the texture BO handle indices is the actual
+	 * uniform data.
+	 *
+	 * The individual uniform state blocks don't have sizes passed in,
+	 * because the kernel has to determine the sizes anyway during shader
+	 * code validation.
+	 */
+	__u64 uniforms;
+	__u64 bo_handles;
+
+	/* Size in bytes of the binner command list. */
+	__u32 bin_cl_size;
+	/* Size in bytes of the set of shader records. */
+	__u32 shader_rec_size;
+	/* Number of shader records.
+	 *
+	 * This could just be computed from the contents of shader_records and
+	 * the address bits of references to them from the bin CL, but it
+	 * keeps the kernel from having to resize some allocations it makes.
+	 */
+	__u32 shader_rec_count;
+	/* Size in bytes of the uniform state. */
+	__u32 uniforms_size;
+
+	/* Number of BO handles passed in (size is that times 4). */
+	__u32 bo_handle_count;
+
+	/* RCL setup: */
+	__u16 width;
+	__u16 height;
+	__u8 min_x_tile;
+	__u8 min_y_tile;
+	__u8 max_x_tile;
+	__u8 max_y_tile;
+	struct drm_vc4_submit_rcl_surface color_read;
+	struct drm_vc4_submit_rcl_surface color_write;
+	struct drm_vc4_submit_rcl_surface zs_read;
+	struct drm_vc4_submit_rcl_surface zs_write;
+	struct drm_vc4_submit_rcl_surface msaa_color_write;
+	struct drm_vc4_submit_rcl_surface msaa_zs_write;
+	__u32 clear_color[2];
+	__u32 clear_z;
+	__u8 clear_s;
+
+	__u32 pad:24;
+
+#define VC4_SUBMIT_CL_USE_CLEAR_COLOR			(1 << 0)
+/* By default, the kernel gets to choose the order that the tiles are
+ * rendered in.  If this is set, then the tiles will be rendered in a
+ * raster order, with the right-to-left vs left-to-right and
+ * top-to-bottom vs bottom-to-top dictated by
+ * VC4_SUBMIT_CL_RCL_ORDER_INCREASING_*.  This allows overlapping
+ * blits to be implemented using the 3D engine.
+ */
+#define VC4_SUBMIT_CL_FIXED_RCL_ORDER			(1 << 1)
+#define VC4_SUBMIT_CL_RCL_ORDER_INCREASING_X		(1 << 2)
+#define VC4_SUBMIT_CL_RCL_ORDER_INCREASING_Y		(1 << 3)
+	__u32 flags;
+
+	/* Returned value of the seqno of this render job (for the
+	 * wait ioctl).
+	 */
+	__u64 seqno;
+
+	/* ID of the perfmon to attach to this job. 0 means no perfmon. */
+	__u32 perfmonid;
+
+	/* Syncobj handle to wait on. If set, processing of this render job
+	 * will not start until the syncobj is signaled. 0 means ignore.
+	 */
+	__u32 in_sync;
+
+	/* Syncobj handle to export fence to. If set, the fence in the syncobj
+	 * will be replaced with a fence that signals upon completion of this
+	 * render job. 0 means ignore.
+	 */
+	__u32 out_sync;
+
+	__u32 pad2;
+};
+
+/**
+ * struct drm_vc4_wait_seqno - ioctl argument for waiting for
+ * DRM_VC4_SUBMIT_CL completion using its returned seqno.
+ *
+ * timeout_ns is the timeout in nanoseconds, where "0" means "don't
+ * block, just return the status."
+ */
+struct drm_vc4_wait_seqno {
+	__u64 seqno;
+	__u64 timeout_ns;
+};
+
+/**
+ * struct drm_vc4_wait_bo - ioctl argument for waiting for
+ * completion of the last DRM_VC4_SUBMIT_CL on a BO.
+ *
+ * This is useful for cases where multiple processes might be
+ * rendering to a BO and you want to wait for all rendering to be
+ * completed.
+ */
+struct drm_vc4_wait_bo {
+	__u32 handle;
+	__u32 pad;
+	__u64 timeout_ns;
+};
+
+/**
+ * struct drm_vc4_create_bo - ioctl argument for creating VC4 BOs.
+ *
+ * There are currently no values for the flags argument, but it may be
+ * used in a future extension.
+ */
+struct drm_vc4_create_bo {
+	__u32 size;
+	__u32 flags;
+	/** Returned GEM handle for the BO. */
+	__u32 handle;
+	__u32 pad;
+};
+
+/**
+ * struct drm_vc4_mmap_bo - ioctl argument for mapping VC4 BOs.
+ *
+ * This doesn't actually perform an mmap.  Instead, it returns the
+ * offset you need to use in an mmap on the DRM device node.  This
+ * means that tools like valgrind end up knowing about the mapped
+ * memory.
+ *
+ * There are currently no values for the flags argument, but it may be
+ * used in a future extension.
+ */
+struct drm_vc4_mmap_bo {
+	/** Handle for the object being mapped. */
+	__u32 handle;
+	__u32 flags;
+	/** offset into the drm node to use for subsequent mmap call. */
+	__u64 offset;
+};
+
+/**
+ * struct drm_vc4_create_shader_bo - ioctl argument for creating VC4
+ * shader BOs.
+ *
+ * Since allowing a shader to be overwritten while it's also being
+ * executed from would allow privlege escalation, shaders must be
+ * created using this ioctl, and they can't be mmapped later.
+ */
+struct drm_vc4_create_shader_bo {
+	/* Size of the data argument. */
+	__u32 size;
+	/* Flags, currently must be 0. */
+	__u32 flags;
+
+	/* Pointer to the data. */
+	__u64 data;
+
+	/** Returned GEM handle for the BO. */
+	__u32 handle;
+	/* Pad, must be 0. */
+	__u32 pad;
+};
+
+struct drm_vc4_get_hang_state_bo {
+	__u32 handle;
+	__u32 paddr;
+	__u32 size;
+	__u32 pad;
+};
+
+/**
+ * struct drm_vc4_hang_state - ioctl argument for collecting state
+ * from a GPU hang for analysis.
+*/
+struct drm_vc4_get_hang_state {
+	/** Pointer to array of struct drm_vc4_get_hang_state_bo. */
+	__u64 bo;
+	/**
+	 * On input, the size of the bo array.  Output is the number
+	 * of bos to be returned.
+	 */
+	__u32 bo_count;
+
+	__u32 start_bin, start_render;
+
+	__u32 ct0ca, ct0ea;
+	__u32 ct1ca, ct1ea;
+	__u32 ct0cs, ct1cs;
+	__u32 ct0ra0, ct1ra0;
+
+	__u32 bpca, bpcs;
+	__u32 bpoa, bpos;
+
+	__u32 vpmbase;
+
+	__u32 dbge;
+	__u32 fdbgo;
+	__u32 fdbgb;
+	__u32 fdbgr;
+	__u32 fdbgs;
+	__u32 errstat;
+
+	/* Pad that we may save more registers into in the future. */
+	__u32 pad[16];
+};
+
+#define DRM_VC4_PARAM_V3D_IDENT0		0
+#define DRM_VC4_PARAM_V3D_IDENT1		1
+#define DRM_VC4_PARAM_V3D_IDENT2		2
+#define DRM_VC4_PARAM_SUPPORTS_BRANCHES		3
+#define DRM_VC4_PARAM_SUPPORTS_ETC1		4
+#define DRM_VC4_PARAM_SUPPORTS_THREADED_FS	5
+#define DRM_VC4_PARAM_SUPPORTS_FIXED_RCL_ORDER	6
+#define DRM_VC4_PARAM_SUPPORTS_MADVISE		7
+#define DRM_VC4_PARAM_SUPPORTS_PERFMON		8
+
+struct drm_vc4_get_param {
+	__u32 param;
+	__u32 pad;
+	__u64 value;
+};
+
+struct drm_vc4_get_tiling {
+	__u32 handle;
+	__u32 flags;
+	__u64 modifier;
+};
+
+struct drm_vc4_set_tiling {
+	__u32 handle;
+	__u32 flags;
+	__u64 modifier;
+};
+
+/**
+ * struct drm_vc4_label_bo - Attach a name to a BO for debug purposes.
+ */
+struct drm_vc4_label_bo {
+	__u32 handle;
+	__u32 len;
+	__u64 name;
+};
+
+/*
+ * States prefixed with '__' are internal states and cannot be passed to the
+ * DRM_IOCTL_VC4_GEM_MADVISE ioctl.
+ */
+#define VC4_MADV_WILLNEED			0
+#define VC4_MADV_DONTNEED			1
+#define __VC4_MADV_PURGED			2
+#define __VC4_MADV_NOTSUPP			3
+
+struct drm_vc4_gem_madvise {
+	__u32 handle;
+	__u32 madv;
+	__u32 retained;
+	__u32 pad;
+};
+
+enum {
+	VC4_PERFCNT_FEP_VALID_PRIMS_NO_RENDER,
+	VC4_PERFCNT_FEP_VALID_PRIMS_RENDER,
+	VC4_PERFCNT_FEP_CLIPPED_QUADS,
+	VC4_PERFCNT_FEP_VALID_QUADS,
+	VC4_PERFCNT_TLB_QUADS_NOT_PASSING_STENCIL,
+	VC4_PERFCNT_TLB_QUADS_NOT_PASSING_Z_AND_STENCIL,
+	VC4_PERFCNT_TLB_QUADS_PASSING_Z_AND_STENCIL,
+	VC4_PERFCNT_TLB_QUADS_ZERO_COVERAGE,
+	VC4_PERFCNT_TLB_QUADS_NON_ZERO_COVERAGE,
+	VC4_PERFCNT_TLB_QUADS_WRITTEN_TO_COLOR_BUF,
+	VC4_PERFCNT_PLB_PRIMS_OUTSIDE_VIEWPORT,
+	VC4_PERFCNT_PLB_PRIMS_NEED_CLIPPING,
+	VC4_PERFCNT_PSE_PRIMS_REVERSED,
+	VC4_PERFCNT_QPU_TOTAL_IDLE_CYCLES,
+	VC4_PERFCNT_QPU_TOTAL_CLK_CYCLES_VERTEX_COORD_SHADING,
+	VC4_PERFCNT_QPU_TOTAL_CLK_CYCLES_FRAGMENT_SHADING,
+	VC4_PERFCNT_QPU_TOTAL_CLK_CYCLES_EXEC_VALID_INST,
+	VC4_PERFCNT_QPU_TOTAL_CLK_CYCLES_WAITING_TMUS,
+	VC4_PERFCNT_QPU_TOTAL_CLK_CYCLES_WAITING_SCOREBOARD,
+	VC4_PERFCNT_QPU_TOTAL_CLK_CYCLES_WAITING_VARYINGS,
+	VC4_PERFCNT_QPU_TOTAL_INST_CACHE_HIT,
+	VC4_PERFCNT_QPU_TOTAL_INST_CACHE_MISS,
+	VC4_PERFCNT_QPU_TOTAL_UNIFORM_CACHE_HIT,
+	VC4_PERFCNT_QPU_TOTAL_UNIFORM_CACHE_MISS,
+	VC4_PERFCNT_TMU_TOTAL_TEXT_QUADS_PROCESSED,
+	VC4_PERFCNT_TMU_TOTAL_TEXT_CACHE_MISS,
+	VC4_PERFCNT_VPM_TOTAL_CLK_CYCLES_VDW_STALLED,
+	VC4_PERFCNT_VPM_TOTAL_CLK_CYCLES_VCD_STALLED,
+	VC4_PERFCNT_L2C_TOTAL_L2_CACHE_HIT,
+	VC4_PERFCNT_L2C_TOTAL_L2_CACHE_MISS,
+	VC4_PERFCNT_NUM_EVENTS,
+};
+
+#define DRM_VC4_MAX_PERF_COUNTERS	16
+
+struct drm_vc4_perfmon_create {
+	__u32 id;
+	__u32 ncounters;
+	__u8 events[DRM_VC4_MAX_PERF_COUNTERS];
+};
+
+struct drm_vc4_perfmon_destroy {
+	__u32 id;
+};
+
+/*
+ * Returns the values of the performance counters tracked by this
+ * perfmon (as an array of ncounters u64 values).
+ *
+ * No implicit synchronization is performed, so the user has to
+ * guarantee that any jobs using this perfmon have already been
+ * completed  (probably by blocking on the seqno returned by the
+ * last exec that used the perfmon).
+ */
+struct drm_vc4_perfmon_get_values {
+	__u32 id;
+	__u64 values_ptr;
+};
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* _VC4_DRM_H_ */
diff --git a/include/drm/via_drm.h b/include/drm/via_drm.h
new file mode 100644
index 0000000..8b69e81
--- /dev/null
+++ b/include/drm/via_drm.h
@@ -0,0 +1,283 @@
+/*
+ * Copyright 1998-2003 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2003 S3 Graphics, Inc. All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * VIA, S3 GRAPHICS, AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+#ifndef _VIA_DRM_H_
+#define _VIA_DRM_H_
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* WARNING: These defines must be the same as what the Xserver uses.
+ * if you change them, you must change the defines in the Xserver.
+ */
+
+#ifndef _VIA_DEFINES_
+#define _VIA_DEFINES_
+
+#include "via_drmclient.h"
+
+#define VIA_NR_SAREA_CLIPRECTS		8
+#define VIA_NR_XVMC_PORTS               10
+#define VIA_NR_XVMC_LOCKS               5
+#define VIA_MAX_CACHELINE_SIZE          64
+#define XVMCLOCKPTR(saPriv,lockNo)					\
+	((__volatile__ struct drm_hw_lock *)(((((unsigned long) (saPriv)->XvMCLockArea) + \
+				      (VIA_MAX_CACHELINE_SIZE - 1)) &	\
+				     ~(VIA_MAX_CACHELINE_SIZE - 1)) +	\
+				    VIA_MAX_CACHELINE_SIZE*(lockNo)))
+
+/* Each region is a minimum of 64k, and there are at most 64 of them.
+ */
+#define VIA_NR_TEX_REGIONS 64
+#define VIA_LOG_MIN_TEX_REGION_SIZE 16
+#endif
+
+#define VIA_UPLOAD_TEX0IMAGE  0x1	/* handled clientside */
+#define VIA_UPLOAD_TEX1IMAGE  0x2	/* handled clientside */
+#define VIA_UPLOAD_CTX        0x4
+#define VIA_UPLOAD_BUFFERS    0x8
+#define VIA_UPLOAD_TEX0       0x10
+#define VIA_UPLOAD_TEX1       0x20
+#define VIA_UPLOAD_CLIPRECTS  0x40
+#define VIA_UPLOAD_ALL        0xff
+
+/* VIA specific ioctls */
+#define DRM_VIA_ALLOCMEM	0x00
+#define DRM_VIA_FREEMEM	        0x01
+#define DRM_VIA_AGP_INIT	0x02
+#define DRM_VIA_FB_INIT	        0x03
+#define DRM_VIA_MAP_INIT	0x04
+#define DRM_VIA_DEC_FUTEX       0x05
+#define NOT_USED
+#define DRM_VIA_DMA_INIT	0x07
+#define DRM_VIA_CMDBUFFER	0x08
+#define DRM_VIA_FLUSH	        0x09
+#define DRM_VIA_PCICMD	        0x0a
+#define DRM_VIA_CMDBUF_SIZE	0x0b
+#define NOT_USED
+#define DRM_VIA_WAIT_IRQ        0x0d
+#define DRM_VIA_DMA_BLIT        0x0e
+#define DRM_VIA_BLIT_SYNC       0x0f
+
+#define DRM_IOCTL_VIA_ALLOCMEM	  DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_ALLOCMEM, drm_via_mem_t)
+#define DRM_IOCTL_VIA_FREEMEM	  DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_FREEMEM, drm_via_mem_t)
+#define DRM_IOCTL_VIA_AGP_INIT	  DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_AGP_INIT, drm_via_agp_t)
+#define DRM_IOCTL_VIA_FB_INIT	  DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_FB_INIT, drm_via_fb_t)
+#define DRM_IOCTL_VIA_MAP_INIT	  DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_MAP_INIT, drm_via_init_t)
+#define DRM_IOCTL_VIA_DEC_FUTEX   DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_DEC_FUTEX, drm_via_futex_t)
+#define DRM_IOCTL_VIA_DMA_INIT	  DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_DMA_INIT, drm_via_dma_init_t)
+#define DRM_IOCTL_VIA_CMDBUFFER	  DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_CMDBUFFER, drm_via_cmdbuffer_t)
+#define DRM_IOCTL_VIA_FLUSH	  DRM_IO(  DRM_COMMAND_BASE + DRM_VIA_FLUSH)
+#define DRM_IOCTL_VIA_PCICMD	  DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_PCICMD, drm_via_cmdbuffer_t)
+#define DRM_IOCTL_VIA_CMDBUF_SIZE DRM_IOWR( DRM_COMMAND_BASE + DRM_VIA_CMDBUF_SIZE, \
+					    drm_via_cmdbuf_size_t)
+#define DRM_IOCTL_VIA_WAIT_IRQ    DRM_IOWR( DRM_COMMAND_BASE + DRM_VIA_WAIT_IRQ, drm_via_irqwait_t)
+#define DRM_IOCTL_VIA_DMA_BLIT    DRM_IOW(DRM_COMMAND_BASE + DRM_VIA_DMA_BLIT, drm_via_dmablit_t)
+#define DRM_IOCTL_VIA_BLIT_SYNC   DRM_IOW(DRM_COMMAND_BASE + DRM_VIA_BLIT_SYNC, drm_via_blitsync_t)
+
+/* Indices into buf.Setup where various bits of state are mirrored per
+ * context and per buffer.  These can be fired at the card as a unit,
+ * or in a piecewise fashion as required.
+ */
+
+#define VIA_TEX_SETUP_SIZE 8
+
+/* Flags for clear ioctl
+ */
+#define VIA_FRONT   0x1
+#define VIA_BACK    0x2
+#define VIA_DEPTH   0x4
+#define VIA_STENCIL 0x8
+#define VIA_MEM_VIDEO   0	/* matches drm constant */
+#define VIA_MEM_AGP     1	/* matches drm constant */
+#define VIA_MEM_SYSTEM  2
+#define VIA_MEM_MIXED   3
+#define VIA_MEM_UNKNOWN 4
+
+typedef struct {
+	__u32 offset;
+	__u32 size;
+} drm_via_agp_t;
+
+typedef struct {
+	__u32 offset;
+	__u32 size;
+} drm_via_fb_t;
+
+typedef struct {
+	__u32 context;
+	__u32 type;
+	__u32 size;
+	unsigned long index;
+	unsigned long offset;
+} drm_via_mem_t;
+
+typedef struct _drm_via_init {
+	enum {
+		VIA_INIT_MAP = 0x01,
+		VIA_CLEANUP_MAP = 0x02
+	} func;
+
+	unsigned long sarea_priv_offset;
+	unsigned long fb_offset;
+	unsigned long mmio_offset;
+	unsigned long agpAddr;
+} drm_via_init_t;
+
+typedef struct _drm_via_futex {
+	enum {
+		VIA_FUTEX_WAIT = 0x00,
+		VIA_FUTEX_WAKE = 0X01
+	} func;
+	__u32 ms;
+	__u32 lock;
+	__u32 val;
+} drm_via_futex_t;
+
+typedef struct _drm_via_dma_init {
+	enum {
+		VIA_INIT_DMA = 0x01,
+		VIA_CLEANUP_DMA = 0x02,
+		VIA_DMA_INITIALIZED = 0x03
+	} func;
+
+	unsigned long offset;
+	unsigned long size;
+	unsigned long reg_pause_addr;
+} drm_via_dma_init_t;
+
+typedef struct _drm_via_cmdbuffer {
+	char *buf;
+	unsigned long size;
+} drm_via_cmdbuffer_t;
+
+/* Warning: If you change the SAREA structure you must change the Xserver
+ * structure as well */
+
+typedef struct _drm_via_tex_region {
+	unsigned char next, prev;	/* indices to form a circular LRU  */
+	unsigned char inUse;	/* owned by a client, or free? */
+	int age;		/* tracked by clients to update local LRU's */
+} drm_via_tex_region_t;
+
+typedef struct _drm_via_sarea {
+	unsigned int dirty;
+	unsigned int nbox;
+	struct drm_clip_rect boxes[VIA_NR_SAREA_CLIPRECTS];
+	drm_via_tex_region_t texList[VIA_NR_TEX_REGIONS + 1];
+	int texAge;		/* last time texture was uploaded */
+	int ctxOwner;		/* last context to upload state */
+	int vertexPrim;
+
+	/*
+	 * Below is for XvMC.
+	 * We want the lock integers alone on, and aligned to, a cache line.
+	 * Therefore this somewhat strange construct.
+	 */
+
+	char XvMCLockArea[VIA_MAX_CACHELINE_SIZE * (VIA_NR_XVMC_LOCKS + 1)];
+
+	unsigned int XvMCDisplaying[VIA_NR_XVMC_PORTS];
+	unsigned int XvMCSubPicOn[VIA_NR_XVMC_PORTS];
+	unsigned int XvMCCtxNoGrabbed;	/* Last context to hold decoder */
+
+	/* Used by the 3d driver only at this point, for pageflipping:
+	 */
+	unsigned int pfCurrentOffset;
+} drm_via_sarea_t;
+
+typedef struct _drm_via_cmdbuf_size {
+	enum {
+		VIA_CMDBUF_SPACE = 0x01,
+		VIA_CMDBUF_LAG = 0x02
+	} func;
+	int wait;
+	__u32 size;
+} drm_via_cmdbuf_size_t;
+
+typedef enum {
+	VIA_IRQ_ABSOLUTE = 0x0,
+	VIA_IRQ_RELATIVE = 0x1,
+	VIA_IRQ_SIGNAL = 0x10000000,
+	VIA_IRQ_FORCE_SEQUENCE = 0x20000000
+} via_irq_seq_type_t;
+
+#define VIA_IRQ_FLAGS_MASK 0xF0000000
+
+enum drm_via_irqs {
+	drm_via_irq_hqv0 = 0,
+	drm_via_irq_hqv1,
+	drm_via_irq_dma0_dd,
+	drm_via_irq_dma0_td,
+	drm_via_irq_dma1_dd,
+	drm_via_irq_dma1_td,
+	drm_via_irq_num
+};
+
+struct drm_via_wait_irq_request {
+	unsigned irq;
+	via_irq_seq_type_t type;
+	__u32 sequence;
+	__u32 signal;
+};
+
+typedef union drm_via_irqwait {
+	struct drm_via_wait_irq_request request;
+	struct drm_wait_vblank_reply reply;
+} drm_via_irqwait_t;
+
+typedef struct drm_via_blitsync {
+	__u32 sync_handle;
+	unsigned engine;
+} drm_via_blitsync_t;
+
+/* - * Below,"flags" is currently unused but will be used for possible future
+ * extensions like kernel space bounce buffers for bad alignments and
+ * blit engine busy-wait polling for better latency in the absence of
+ * interrupts.
+ */
+
+typedef struct drm_via_dmablit {
+	__u32 num_lines;
+	__u32 line_length;
+
+	__u32 fb_addr;
+	__u32 fb_stride;
+
+	unsigned char *mem_addr;
+	__u32 mem_stride;
+
+	__u32 flags;
+	int to_fb;
+
+	drm_via_blitsync_t sync;
+} drm_via_dmablit_t;
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif				/* _VIA_DRM_H_ */
diff --git a/include/drm/virtgpu_drm.h b/include/drm/virtgpu_drm.h
new file mode 100644
index 0000000..f06a789
--- /dev/null
+++ b/include/drm/virtgpu_drm.h
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2013 Red Hat
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#ifndef VIRTGPU_DRM_H
+#define VIRTGPU_DRM_H
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* Please note that modifications to all structs defined here are
+ * subject to backwards-compatibility constraints.
+ *
+ * Do not use pointers, use __u64 instead for 32 bit / 64 bit user/kernel
+ * compatibility Keep fields aligned to their size
+ */
+
+#define DRM_VIRTGPU_MAP         0x01
+#define DRM_VIRTGPU_EXECBUFFER  0x02
+#define DRM_VIRTGPU_GETPARAM    0x03
+#define DRM_VIRTGPU_RESOURCE_CREATE 0x04
+#define DRM_VIRTGPU_RESOURCE_INFO     0x05
+#define DRM_VIRTGPU_TRANSFER_FROM_HOST 0x06
+#define DRM_VIRTGPU_TRANSFER_TO_HOST 0x07
+#define DRM_VIRTGPU_WAIT     0x08
+#define DRM_VIRTGPU_GET_CAPS  0x09
+
+#define VIRTGPU_EXECBUF_FENCE_FD_IN	0x01
+#define VIRTGPU_EXECBUF_FENCE_FD_OUT	0x02
+#define VIRTGPU_EXECBUF_FLAGS  (\
+		VIRTGPU_EXECBUF_FENCE_FD_IN |\
+		VIRTGPU_EXECBUF_FENCE_FD_OUT |\
+		0)
+
+struct drm_virtgpu_map {
+	__u64 offset; /* use for mmap system call */
+	__u32 handle;
+	__u32 pad;
+};
+
+struct drm_virtgpu_execbuffer {
+	__u32 flags;
+	__u32 size;
+	__u64 command; /* void* */
+	__u64 bo_handles;
+	__u32 num_bo_handles;
+	__s32 fence_fd; /* in/out fence fd (see VIRTGPU_EXECBUF_FENCE_FD_IN/OUT) */
+};
+
+#define VIRTGPU_PARAM_3D_FEATURES 1 /* do we have 3D features in the hw */
+#define VIRTGPU_PARAM_CAPSET_QUERY_FIX 2 /* do we have the capset fix */
+
+struct drm_virtgpu_getparam {
+	__u64 param;
+	__u64 value;
+};
+
+/* NO_BO flags? NO resource flag? */
+/* resource flag for y_0_top */
+struct drm_virtgpu_resource_create {
+	__u32 target;
+	__u32 format;
+	__u32 bind;
+	__u32 width;
+	__u32 height;
+	__u32 depth;
+	__u32 array_size;
+	__u32 last_level;
+	__u32 nr_samples;
+	__u32 flags;
+	__u32 bo_handle; /* if this is set - recreate a new resource attached to this bo ? */
+	__u32 res_handle;  /* returned by kernel */
+	__u32 size;        /* validate transfer in the host */
+	__u32 stride;      /* validate transfer in the host */
+};
+
+struct drm_virtgpu_resource_info {
+	__u32 bo_handle;
+	__u32 res_handle;
+	__u32 size;
+	__u32 stride;
+};
+
+struct drm_virtgpu_3d_box {
+	__u32 x;
+	__u32 y;
+	__u32 z;
+	__u32 w;
+	__u32 h;
+	__u32 d;
+};
+
+struct drm_virtgpu_3d_transfer_to_host {
+	__u32 bo_handle;
+	struct drm_virtgpu_3d_box box;
+	__u32 level;
+	__u32 offset;
+};
+
+struct drm_virtgpu_3d_transfer_from_host {
+	__u32 bo_handle;
+	struct drm_virtgpu_3d_box box;
+	__u32 level;
+	__u32 offset;
+};
+
+#define VIRTGPU_WAIT_NOWAIT 1 /* like it */
+struct drm_virtgpu_3d_wait {
+	__u32 handle; /* 0 is an invalid handle */
+	__u32 flags;
+};
+
+struct drm_virtgpu_get_caps {
+	__u32 cap_set_id;
+	__u32 cap_set_ver;
+	__u64 addr;
+	__u32 size;
+	__u32 pad;
+};
+
+#define DRM_IOCTL_VIRTGPU_MAP \
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_MAP, struct drm_virtgpu_map)
+
+#define DRM_IOCTL_VIRTGPU_EXECBUFFER \
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_EXECBUFFER,\
+		struct drm_virtgpu_execbuffer)
+
+#define DRM_IOCTL_VIRTGPU_GETPARAM \
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_GETPARAM,\
+		struct drm_virtgpu_getparam)
+
+#define DRM_IOCTL_VIRTGPU_RESOURCE_CREATE			\
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_RESOURCE_CREATE,	\
+		struct drm_virtgpu_resource_create)
+
+#define DRM_IOCTL_VIRTGPU_RESOURCE_INFO \
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_RESOURCE_INFO, \
+		 struct drm_virtgpu_resource_info)
+
+#define DRM_IOCTL_VIRTGPU_TRANSFER_FROM_HOST \
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_TRANSFER_FROM_HOST,	\
+		struct drm_virtgpu_3d_transfer_from_host)
+
+#define DRM_IOCTL_VIRTGPU_TRANSFER_TO_HOST \
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_TRANSFER_TO_HOST,	\
+		struct drm_virtgpu_3d_transfer_to_host)
+
+#define DRM_IOCTL_VIRTGPU_WAIT				\
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_WAIT,	\
+		struct drm_virtgpu_3d_wait)
+
+#define DRM_IOCTL_VIRTGPU_GET_CAPS \
+	DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_GET_CAPS, \
+	struct drm_virtgpu_get_caps)
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
diff --git a/include/drm/vmwgfx_drm.h b/include/drm/vmwgfx_drm.h
new file mode 100644
index 0000000..2b8d47e
--- /dev/null
+++ b/include/drm/vmwgfx_drm.h
@@ -0,0 +1,1128 @@
+/**************************************************************************
+ *
+ * Copyright © 2009-2015 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+
+#ifndef __VMWGFX_DRM_H__
+#define __VMWGFX_DRM_H__
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#define DRM_VMW_MAX_SURFACE_FACES 6
+#define DRM_VMW_MAX_MIP_LEVELS 24
+
+
+#define DRM_VMW_GET_PARAM            0
+#define DRM_VMW_ALLOC_DMABUF         1
+#define DRM_VMW_UNREF_DMABUF         2
+#define DRM_VMW_HANDLE_CLOSE         2
+#define DRM_VMW_CURSOR_BYPASS        3
+/* guarded by DRM_VMW_PARAM_NUM_STREAMS != 0*/
+#define DRM_VMW_CONTROL_STREAM       4
+#define DRM_VMW_CLAIM_STREAM         5
+#define DRM_VMW_UNREF_STREAM         6
+/* guarded by DRM_VMW_PARAM_3D == 1 */
+#define DRM_VMW_CREATE_CONTEXT       7
+#define DRM_VMW_UNREF_CONTEXT        8
+#define DRM_VMW_CREATE_SURFACE       9
+#define DRM_VMW_UNREF_SURFACE        10
+#define DRM_VMW_REF_SURFACE          11
+#define DRM_VMW_EXECBUF              12
+#define DRM_VMW_GET_3D_CAP           13
+#define DRM_VMW_FENCE_WAIT           14
+#define DRM_VMW_FENCE_SIGNALED       15
+#define DRM_VMW_FENCE_UNREF          16
+#define DRM_VMW_FENCE_EVENT          17
+#define DRM_VMW_PRESENT              18
+#define DRM_VMW_PRESENT_READBACK     19
+#define DRM_VMW_UPDATE_LAYOUT        20
+#define DRM_VMW_CREATE_SHADER        21
+#define DRM_VMW_UNREF_SHADER         22
+#define DRM_VMW_GB_SURFACE_CREATE    23
+#define DRM_VMW_GB_SURFACE_REF       24
+#define DRM_VMW_SYNCCPU              25
+#define DRM_VMW_CREATE_EXTENDED_CONTEXT 26
+
+/*************************************************************************/
+/**
+ * DRM_VMW_GET_PARAM - get device information.
+ *
+ * DRM_VMW_PARAM_FIFO_OFFSET:
+ * Offset to use to map the first page of the FIFO read-only.
+ * The fifo is mapped using the mmap() system call on the drm device.
+ *
+ * DRM_VMW_PARAM_OVERLAY_IOCTL:
+ * Does the driver support the overlay ioctl.
+ */
+
+#define DRM_VMW_PARAM_NUM_STREAMS      0
+#define DRM_VMW_PARAM_NUM_FREE_STREAMS 1
+#define DRM_VMW_PARAM_3D               2
+#define DRM_VMW_PARAM_HW_CAPS          3
+#define DRM_VMW_PARAM_FIFO_CAPS        4
+#define DRM_VMW_PARAM_MAX_FB_SIZE      5
+#define DRM_VMW_PARAM_FIFO_HW_VERSION  6
+#define DRM_VMW_PARAM_MAX_SURF_MEMORY  7
+#define DRM_VMW_PARAM_3D_CAPS_SIZE     8
+#define DRM_VMW_PARAM_MAX_MOB_MEMORY   9
+#define DRM_VMW_PARAM_MAX_MOB_SIZE     10
+#define DRM_VMW_PARAM_SCREEN_TARGET    11
+#define DRM_VMW_PARAM_DX               12
+
+/**
+ * enum drm_vmw_handle_type - handle type for ref ioctls
+ *
+ */
+enum drm_vmw_handle_type {
+	DRM_VMW_HANDLE_LEGACY = 0,
+	DRM_VMW_HANDLE_PRIME = 1
+};
+
+/**
+ * struct drm_vmw_getparam_arg
+ *
+ * @value: Returned value. //Out
+ * @param: Parameter to query. //In.
+ *
+ * Argument to the DRM_VMW_GET_PARAM Ioctl.
+ */
+
+struct drm_vmw_getparam_arg {
+	__u64 value;
+	__u32 param;
+	__u32 pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_CREATE_CONTEXT - Create a host context.
+ *
+ * Allocates a device unique context id, and queues a create context command
+ * for the host. Does not wait for host completion.
+ */
+
+/**
+ * struct drm_vmw_context_arg
+ *
+ * @cid: Device unique context ID.
+ *
+ * Output argument to the DRM_VMW_CREATE_CONTEXT Ioctl.
+ * Input argument to the DRM_VMW_UNREF_CONTEXT Ioctl.
+ */
+
+struct drm_vmw_context_arg {
+	__s32 cid;
+	__u32 pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UNREF_CONTEXT - Create a host context.
+ *
+ * Frees a global context id, and queues a destroy host command for the host.
+ * Does not wait for host completion. The context ID can be used directly
+ * in the command stream and shows up as the same context ID on the host.
+ */
+
+/*************************************************************************/
+/**
+ * DRM_VMW_CREATE_SURFACE - Create a host suface.
+ *
+ * Allocates a device unique surface id, and queues a create surface command
+ * for the host. Does not wait for host completion. The surface ID can be
+ * used directly in the command stream and shows up as the same surface
+ * ID on the host.
+ */
+
+/**
+ * struct drm_wmv_surface_create_req
+ *
+ * @flags: Surface flags as understood by the host.
+ * @format: Surface format as understood by the host.
+ * @mip_levels: Number of mip levels for each face.
+ * An unused face should have 0 encoded.
+ * @size_addr: Address of a user-space array of sruct drm_vmw_size
+ * cast to an __u64 for 32-64 bit compatibility.
+ * The size of the array should equal the total number of mipmap levels.
+ * @shareable: Boolean whether other clients (as identified by file descriptors)
+ * may reference this surface.
+ * @scanout: Boolean whether the surface is intended to be used as a
+ * scanout.
+ *
+ * Input data to the DRM_VMW_CREATE_SURFACE Ioctl.
+ * Output data from the DRM_VMW_REF_SURFACE Ioctl.
+ */
+
+struct drm_vmw_surface_create_req {
+	__u32 flags;
+	__u32 format;
+	__u32 mip_levels[DRM_VMW_MAX_SURFACE_FACES];
+	__u64 size_addr;
+	__s32 shareable;
+	__s32 scanout;
+};
+
+/**
+ * struct drm_wmv_surface_arg
+ *
+ * @sid: Surface id of created surface or surface to destroy or reference.
+ * @handle_type: Handle type for DRM_VMW_REF_SURFACE Ioctl.
+ *
+ * Output data from the DRM_VMW_CREATE_SURFACE Ioctl.
+ * Input argument to the DRM_VMW_UNREF_SURFACE Ioctl.
+ * Input argument to the DRM_VMW_REF_SURFACE Ioctl.
+ */
+
+struct drm_vmw_surface_arg {
+	__s32 sid;
+	enum drm_vmw_handle_type handle_type;
+};
+
+/**
+ * struct drm_vmw_size ioctl.
+ *
+ * @width - mip level width
+ * @height - mip level height
+ * @depth - mip level depth
+ *
+ * Description of a mip level.
+ * Input data to the DRM_WMW_CREATE_SURFACE Ioctl.
+ */
+
+struct drm_vmw_size {
+	__u32 width;
+	__u32 height;
+	__u32 depth;
+	__u32 pad64;
+};
+
+/**
+ * union drm_vmw_surface_create_arg
+ *
+ * @rep: Output data as described above.
+ * @req: Input data as described above.
+ *
+ * Argument to the DRM_VMW_CREATE_SURFACE Ioctl.
+ */
+
+union drm_vmw_surface_create_arg {
+	struct drm_vmw_surface_arg rep;
+	struct drm_vmw_surface_create_req req;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_REF_SURFACE - Reference a host surface.
+ *
+ * Puts a reference on a host surface with a give sid, as previously
+ * returned by the DRM_VMW_CREATE_SURFACE ioctl.
+ * A reference will make sure the surface isn't destroyed while we hold
+ * it and will allow the calling client to use the surface ID in the command
+ * stream.
+ *
+ * On successful return, the Ioctl returns the surface information given
+ * in the DRM_VMW_CREATE_SURFACE ioctl.
+ */
+
+/**
+ * union drm_vmw_surface_reference_arg
+ *
+ * @rep: Output data as described above.
+ * @req: Input data as described above.
+ *
+ * Argument to the DRM_VMW_REF_SURFACE Ioctl.
+ */
+
+union drm_vmw_surface_reference_arg {
+	struct drm_vmw_surface_create_req rep;
+	struct drm_vmw_surface_arg req;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UNREF_SURFACE - Unreference a host surface.
+ *
+ * Clear a reference previously put on a host surface.
+ * When all references are gone, including the one implicitly placed
+ * on creation,
+ * a destroy surface command will be queued for the host.
+ * Does not wait for completion.
+ */
+
+/*************************************************************************/
+/**
+ * DRM_VMW_EXECBUF
+ *
+ * Submit a command buffer for execution on the host, and return a
+ * fence seqno that when signaled, indicates that the command buffer has
+ * executed.
+ */
+
+/**
+ * struct drm_vmw_execbuf_arg
+ *
+ * @commands: User-space address of a command buffer cast to an __u64.
+ * @command-size: Size in bytes of the command buffer.
+ * @throttle-us: Sleep until software is less than @throttle_us
+ * microseconds ahead of hardware. The driver may round this value
+ * to the nearest kernel tick.
+ * @fence_rep: User-space address of a struct drm_vmw_fence_rep cast to an
+ * __u64.
+ * @version: Allows expanding the execbuf ioctl parameters without breaking
+ * backwards compatibility, since user-space will always tell the kernel
+ * which version it uses.
+ * @flags: Execbuf flags.
+ * @imported_fence_fd:  FD for a fence imported from another device
+ *
+ * Argument to the DRM_VMW_EXECBUF Ioctl.
+ */
+
+#define DRM_VMW_EXECBUF_VERSION 2
+
+#define DRM_VMW_EXECBUF_FLAG_IMPORT_FENCE_FD (1 << 0)
+#define DRM_VMW_EXECBUF_FLAG_EXPORT_FENCE_FD (1 << 1)
+
+struct drm_vmw_execbuf_arg {
+	__u64 commands;
+	__u32 command_size;
+	__u32 throttle_us;
+	__u64 fence_rep;
+	__u32 version;
+	__u32 flags;
+	__u32 context_handle;
+	__s32 imported_fence_fd;
+};
+
+/**
+ * struct drm_vmw_fence_rep
+ *
+ * @handle: Fence object handle for fence associated with a command submission.
+ * @mask: Fence flags relevant for this fence object.
+ * @seqno: Fence sequence number in fifo. A fence object with a lower
+ * seqno will signal the EXEC flag before a fence object with a higher
+ * seqno. This can be used by user-space to avoid kernel calls to determine
+ * whether a fence has signaled the EXEC flag. Note that @seqno will
+ * wrap at 32-bit.
+ * @passed_seqno: The highest seqno number processed by the hardware
+ * so far. This can be used to mark user-space fence objects as signaled, and
+ * to determine whether a fence seqno might be stale.
+ * @fd: FD associated with the fence, -1 if not exported
+ * @error: This member should've been set to -EFAULT on submission.
+ * The following actions should be take on completion:
+ * error == -EFAULT: Fence communication failed. The host is synchronized.
+ * Use the last fence id read from the FIFO fence register.
+ * error != 0 && error != -EFAULT:
+ * Fence submission failed. The host is synchronized. Use the fence_seq member.
+ * error == 0: All is OK, The host may not be synchronized.
+ * Use the fence_seq member.
+ *
+ * Input / Output data to the DRM_VMW_EXECBUF Ioctl.
+ */
+
+struct drm_vmw_fence_rep {
+	__u32 handle;
+	__u32 mask;
+	__u32 seqno;
+	__u32 passed_seqno;
+	__s32 fd;
+	__s32 error;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_ALLOC_DMABUF
+ *
+ * Allocate a DMA buffer that is visible also to the host.
+ * NOTE: The buffer is
+ * identified by a handle and an offset, which are private to the guest, but
+ * usable in the command stream. The guest kernel may translate these
+ * and patch up the command stream accordingly. In the future, the offset may
+ * be zero at all times, or it may disappear from the interface before it is
+ * fixed.
+ *
+ * The DMA buffer may stay user-space mapped in the guest at all times,
+ * and is thus suitable for sub-allocation.
+ *
+ * DMA buffers are mapped using the mmap() syscall on the drm device.
+ */
+
+/**
+ * struct drm_vmw_alloc_dmabuf_req
+ *
+ * @size: Required minimum size of the buffer.
+ *
+ * Input data to the DRM_VMW_ALLOC_DMABUF Ioctl.
+ */
+
+struct drm_vmw_alloc_dmabuf_req {
+	__u32 size;
+	__u32 pad64;
+};
+
+/**
+ * struct drm_vmw_dmabuf_rep
+ *
+ * @map_handle: Offset to use in the mmap() call used to map the buffer.
+ * @handle: Handle unique to this buffer. Used for unreferencing.
+ * @cur_gmr_id: GMR id to use in the command stream when this buffer is
+ * referenced. See not above.
+ * @cur_gmr_offset: Offset to use in the command stream when this buffer is
+ * referenced. See note above.
+ *
+ * Output data from the DRM_VMW_ALLOC_DMABUF Ioctl.
+ */
+
+struct drm_vmw_dmabuf_rep {
+	__u64 map_handle;
+	__u32 handle;
+	__u32 cur_gmr_id;
+	__u32 cur_gmr_offset;
+	__u32 pad64;
+};
+
+/**
+ * union drm_vmw_dmabuf_arg
+ *
+ * @req: Input data as described above.
+ * @rep: Output data as described above.
+ *
+ * Argument to the DRM_VMW_ALLOC_DMABUF Ioctl.
+ */
+
+union drm_vmw_alloc_dmabuf_arg {
+	struct drm_vmw_alloc_dmabuf_req req;
+	struct drm_vmw_dmabuf_rep rep;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UNREF_DMABUF - Free a DMA buffer.
+ *
+ */
+
+/**
+ * struct drm_vmw_unref_dmabuf_arg
+ *
+ * @handle: Handle indicating what buffer to free. Obtained from the
+ * DRM_VMW_ALLOC_DMABUF Ioctl.
+ *
+ * Argument to the DRM_VMW_UNREF_DMABUF Ioctl.
+ */
+
+struct drm_vmw_unref_dmabuf_arg {
+	__u32 handle;
+	__u32 pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_CONTROL_STREAM - Control overlays, aka streams.
+ *
+ * This IOCTL controls the overlay units of the svga device.
+ * The SVGA overlay units does not work like regular hardware units in
+ * that they do not automatically read back the contents of the given dma
+ * buffer. But instead only read back for each call to this ioctl, and
+ * at any point between this call being made and a following call that
+ * either changes the buffer or disables the stream.
+ */
+
+/**
+ * struct drm_vmw_rect
+ *
+ * Defines a rectangle. Used in the overlay ioctl to define
+ * source and destination rectangle.
+ */
+
+struct drm_vmw_rect {
+	__s32 x;
+	__s32 y;
+	__u32 w;
+	__u32 h;
+};
+
+/**
+ * struct drm_vmw_control_stream_arg
+ *
+ * @stream_id: Stearm to control
+ * @enabled: If false all following arguments are ignored.
+ * @handle: Handle to buffer for getting data from.
+ * @format: Format of the overlay as understood by the host.
+ * @width: Width of the overlay.
+ * @height: Height of the overlay.
+ * @size: Size of the overlay in bytes.
+ * @pitch: Array of pitches, the two last are only used for YUV12 formats.
+ * @offset: Offset from start of dma buffer to overlay.
+ * @src: Source rect, must be within the defined area above.
+ * @dst: Destination rect, x and y may be negative.
+ *
+ * Argument to the DRM_VMW_CONTROL_STREAM Ioctl.
+ */
+
+struct drm_vmw_control_stream_arg {
+	__u32 stream_id;
+	__u32 enabled;
+
+	__u32 flags;
+	__u32 color_key;
+
+	__u32 handle;
+	__u32 offset;
+	__s32 format;
+	__u32 size;
+	__u32 width;
+	__u32 height;
+	__u32 pitch[3];
+
+	__u32 pad64;
+	struct drm_vmw_rect src;
+	struct drm_vmw_rect dst;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_CURSOR_BYPASS - Give extra information about cursor bypass.
+ *
+ */
+
+#define DRM_VMW_CURSOR_BYPASS_ALL    (1 << 0)
+#define DRM_VMW_CURSOR_BYPASS_FLAGS       (1)
+
+/**
+ * struct drm_vmw_cursor_bypass_arg
+ *
+ * @flags: Flags.
+ * @crtc_id: Crtc id, only used if DMR_CURSOR_BYPASS_ALL isn't passed.
+ * @xpos: X position of cursor.
+ * @ypos: Y position of cursor.
+ * @xhot: X hotspot.
+ * @yhot: Y hotspot.
+ *
+ * Argument to the DRM_VMW_CURSOR_BYPASS Ioctl.
+ */
+
+struct drm_vmw_cursor_bypass_arg {
+	__u32 flags;
+	__u32 crtc_id;
+	__s32 xpos;
+	__s32 ypos;
+	__s32 xhot;
+	__s32 yhot;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_CLAIM_STREAM - Claim a single stream.
+ */
+
+/**
+ * struct drm_vmw_context_arg
+ *
+ * @stream_id: Device unique context ID.
+ *
+ * Output argument to the DRM_VMW_CREATE_CONTEXT Ioctl.
+ * Input argument to the DRM_VMW_UNREF_CONTEXT Ioctl.
+ */
+
+struct drm_vmw_stream_arg {
+	__u32 stream_id;
+	__u32 pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UNREF_STREAM - Unclaim a stream.
+ *
+ * Return a single stream that was claimed by this process. Also makes
+ * sure that the stream has been stopped.
+ */
+
+/*************************************************************************/
+/**
+ * DRM_VMW_GET_3D_CAP
+ *
+ * Read 3D capabilities from the FIFO
+ *
+ */
+
+/**
+ * struct drm_vmw_get_3d_cap_arg
+ *
+ * @buffer: Pointer to a buffer for capability data, cast to an __u64
+ * @size: Max size to copy
+ *
+ * Input argument to the DRM_VMW_GET_3D_CAP_IOCTL
+ * ioctls.
+ */
+
+struct drm_vmw_get_3d_cap_arg {
+	__u64 buffer;
+	__u32 max_size;
+	__u32 pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_FENCE_WAIT
+ *
+ * Waits for a fence object to signal. The wait is interruptible, so that
+ * signals may be delivered during the interrupt. The wait may timeout,
+ * in which case the calls returns -EBUSY. If the wait is restarted,
+ * that is restarting without resetting @cookie_valid to zero,
+ * the timeout is computed from the first call.
+ *
+ * The flags argument to the DRM_VMW_FENCE_WAIT ioctl indicates what to wait
+ * on:
+ * DRM_VMW_FENCE_FLAG_EXEC: All commands ahead of the fence in the command
+ * stream
+ * have executed.
+ * DRM_VMW_FENCE_FLAG_QUERY: All query results resulting from query finish
+ * commands
+ * in the buffer given to the EXECBUF ioctl returning the fence object handle
+ * are available to user-space.
+ *
+ * DRM_VMW_WAIT_OPTION_UNREF: If this wait option is given, and the
+ * fenc wait ioctl returns 0, the fence object has been unreferenced after
+ * the wait.
+ */
+
+#define DRM_VMW_FENCE_FLAG_EXEC   (1 << 0)
+#define DRM_VMW_FENCE_FLAG_QUERY  (1 << 1)
+
+#define DRM_VMW_WAIT_OPTION_UNREF (1 << 0)
+
+/**
+ * struct drm_vmw_fence_wait_arg
+ *
+ * @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl.
+ * @cookie_valid: Must be reset to 0 on first call. Left alone on restart.
+ * @kernel_cookie: Set to 0 on first call. Left alone on restart.
+ * @timeout_us: Wait timeout in microseconds. 0 for indefinite timeout.
+ * @lazy: Set to 1 if timing is not critical. Allow more than a kernel tick
+ * before returning.
+ * @flags: Fence flags to wait on.
+ * @wait_options: Options that control the behaviour of the wait ioctl.
+ *
+ * Input argument to the DRM_VMW_FENCE_WAIT ioctl.
+ */
+
+struct drm_vmw_fence_wait_arg {
+	__u32 handle;
+	__s32  cookie_valid;
+	__u64 kernel_cookie;
+	__u64 timeout_us;
+	__s32 lazy;
+	__s32 flags;
+	__s32 wait_options;
+	__s32 pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_FENCE_SIGNALED
+ *
+ * Checks if a fence object is signaled..
+ */
+
+/**
+ * struct drm_vmw_fence_signaled_arg
+ *
+ * @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl.
+ * @flags: Fence object flags input to DRM_VMW_FENCE_SIGNALED ioctl
+ * @signaled: Out: Flags signaled.
+ * @sequence: Out: Highest sequence passed so far. Can be used to signal the
+ * EXEC flag of user-space fence objects.
+ *
+ * Input/Output argument to the DRM_VMW_FENCE_SIGNALED and DRM_VMW_FENCE_UNREF
+ * ioctls.
+ */
+
+struct drm_vmw_fence_signaled_arg {
+	 __u32 handle;
+	 __u32 flags;
+	 __s32 signaled;
+	 __u32 passed_seqno;
+	 __u32 signaled_flags;
+	 __u32 pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_FENCE_UNREF
+ *
+ * Unreferences a fence object, and causes it to be destroyed if there are no
+ * other references to it.
+ *
+ */
+
+/**
+ * struct drm_vmw_fence_arg
+ *
+ * @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl.
+ *
+ * Input/Output argument to the DRM_VMW_FENCE_UNREF ioctl..
+ */
+
+struct drm_vmw_fence_arg {
+	 __u32 handle;
+	 __u32 pad64;
+};
+
+
+/*************************************************************************/
+/**
+ * DRM_VMW_FENCE_EVENT
+ *
+ * Queues an event on a fence to be delivered on the drm character device
+ * when the fence has signaled the DRM_VMW_FENCE_FLAG_EXEC flag.
+ * Optionally the approximate time when the fence signaled is
+ * given by the event.
+ */
+
+/*
+ * The event type
+ */
+#define DRM_VMW_EVENT_FENCE_SIGNALED 0x80000000
+
+struct drm_vmw_event_fence {
+	struct drm_event base;
+	__u64 user_data;
+	__u32 tv_sec;
+	__u32 tv_usec;
+};
+
+/*
+ * Flags that may be given to the command.
+ */
+/* Request fence signaled time on the event. */
+#define DRM_VMW_FE_FLAG_REQ_TIME (1 << 0)
+
+/**
+ * struct drm_vmw_fence_event_arg
+ *
+ * @fence_rep: Pointer to fence_rep structure cast to __u64 or 0 if
+ * the fence is not supposed to be referenced by user-space.
+ * @user_info: Info to be delivered with the event.
+ * @handle: Attach the event to this fence only.
+ * @flags: A set of flags as defined above.
+ */
+struct drm_vmw_fence_event_arg {
+	__u64 fence_rep;
+	__u64 user_data;
+	__u32 handle;
+	__u32 flags;
+};
+
+
+/*************************************************************************/
+/**
+ * DRM_VMW_PRESENT
+ *
+ * Executes an SVGA present on a given fb for a given surface. The surface
+ * is placed on the framebuffer. Cliprects are given relative to the given
+ * point (the point disignated by dest_{x|y}).
+ *
+ */
+
+/**
+ * struct drm_vmw_present_arg
+ * @fb_id: framebuffer id to present / read back from.
+ * @sid: Surface id to present from.
+ * @dest_x: X placement coordinate for surface.
+ * @dest_y: Y placement coordinate for surface.
+ * @clips_ptr: Pointer to an array of clip rects cast to an __u64.
+ * @num_clips: Number of cliprects given relative to the framebuffer origin,
+ * in the same coordinate space as the frame buffer.
+ * @pad64: Unused 64-bit padding.
+ *
+ * Input argument to the DRM_VMW_PRESENT ioctl.
+ */
+
+struct drm_vmw_present_arg {
+	__u32 fb_id;
+	__u32 sid;
+	__s32 dest_x;
+	__s32 dest_y;
+	__u64 clips_ptr;
+	__u32 num_clips;
+	__u32 pad64;
+};
+
+
+/*************************************************************************/
+/**
+ * DRM_VMW_PRESENT_READBACK
+ *
+ * Executes an SVGA present readback from a given fb to the dma buffer
+ * currently bound as the fb. If there is no dma buffer bound to the fb,
+ * an error will be returned.
+ *
+ */
+
+/**
+ * struct drm_vmw_present_arg
+ * @fb_id: fb_id to present / read back from.
+ * @num_clips: Number of cliprects.
+ * @clips_ptr: Pointer to an array of clip rects cast to an __u64.
+ * @fence_rep: Pointer to a struct drm_vmw_fence_rep, cast to an __u64.
+ * If this member is NULL, then the ioctl should not return a fence.
+ */
+
+struct drm_vmw_present_readback_arg {
+	 __u32 fb_id;
+	 __u32 num_clips;
+	 __u64 clips_ptr;
+	 __u64 fence_rep;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UPDATE_LAYOUT - Update layout
+ *
+ * Updates the preferred modes and connection status for connectors. The
+ * command consists of one drm_vmw_update_layout_arg pointing to an array
+ * of num_outputs drm_vmw_rect's.
+ */
+
+/**
+ * struct drm_vmw_update_layout_arg
+ *
+ * @num_outputs: number of active connectors
+ * @rects: pointer to array of drm_vmw_rect cast to an __u64
+ *
+ * Input argument to the DRM_VMW_UPDATE_LAYOUT Ioctl.
+ */
+struct drm_vmw_update_layout_arg {
+	__u32 num_outputs;
+	__u32 pad64;
+	__u64 rects;
+};
+
+
+/*************************************************************************/
+/**
+ * DRM_VMW_CREATE_SHADER - Create shader
+ *
+ * Creates a shader and optionally binds it to a dma buffer containing
+ * the shader byte-code.
+ */
+
+/**
+ * enum drm_vmw_shader_type - Shader types
+ */
+enum drm_vmw_shader_type {
+	drm_vmw_shader_type_vs = 0,
+	drm_vmw_shader_type_ps,
+};
+
+
+/**
+ * struct drm_vmw_shader_create_arg
+ *
+ * @shader_type: Shader type of the shader to create.
+ * @size: Size of the byte-code in bytes.
+ * where the shader byte-code starts
+ * @buffer_handle: Buffer handle identifying the buffer containing the
+ * shader byte-code
+ * @shader_handle: On successful completion contains a handle that
+ * can be used to subsequently identify the shader.
+ * @offset: Offset in bytes into the buffer given by @buffer_handle,
+ *
+ * Input / Output argument to the DRM_VMW_CREATE_SHADER Ioctl.
+ */
+struct drm_vmw_shader_create_arg {
+	enum drm_vmw_shader_type shader_type;
+	__u32 size;
+	__u32 buffer_handle;
+	__u32 shader_handle;
+	__u64 offset;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UNREF_SHADER - Unreferences a shader
+ *
+ * Destroys a user-space reference to a shader, optionally destroying
+ * it.
+ */
+
+/**
+ * struct drm_vmw_shader_arg
+ *
+ * @handle: Handle identifying the shader to destroy.
+ *
+ * Input argument to the DRM_VMW_UNREF_SHADER ioctl.
+ */
+struct drm_vmw_shader_arg {
+	__u32 handle;
+	__u32 pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_GB_SURFACE_CREATE - Create a host guest-backed surface.
+ *
+ * Allocates a surface handle and queues a create surface command
+ * for the host on the first use of the surface. The surface ID can
+ * be used as the surface ID in commands referencing the surface.
+ */
+
+/**
+ * enum drm_vmw_surface_flags
+ *
+ * @drm_vmw_surface_flag_shareable:     Whether the surface is shareable
+ * @drm_vmw_surface_flag_scanout:       Whether the surface is a scanout
+ *                                      surface.
+ * @drm_vmw_surface_flag_create_buffer: Create a backup buffer if none is
+ *                                      given.
+ */
+enum drm_vmw_surface_flags {
+	drm_vmw_surface_flag_shareable = (1 << 0),
+	drm_vmw_surface_flag_scanout = (1 << 1),
+	drm_vmw_surface_flag_create_buffer = (1 << 2)
+};
+
+/**
+ * struct drm_vmw_gb_surface_create_req
+ *
+ * @svga3d_flags:     SVGA3d surface flags for the device.
+ * @format:           SVGA3d format.
+ * @mip_level:        Number of mip levels for all faces.
+ * @drm_surface_flags Flags as described above.
+ * @multisample_count Future use. Set to 0.
+ * @autogen_filter    Future use. Set to 0.
+ * @buffer_handle     Buffer handle of backup buffer. SVGA3D_INVALID_ID
+ *                    if none.
+ * @base_size         Size of the base mip level for all faces.
+ * @array_size        Must be zero for non-DX hardware, and if non-zero
+ *                    svga3d_flags must have proper bind flags setup.
+ *
+ * Input argument to the  DRM_VMW_GB_SURFACE_CREATE Ioctl.
+ * Part of output argument for the DRM_VMW_GB_SURFACE_REF Ioctl.
+ */
+struct drm_vmw_gb_surface_create_req {
+	__u32 svga3d_flags;
+	__u32 format;
+	__u32 mip_levels;
+	enum drm_vmw_surface_flags drm_surface_flags;
+	__u32 multisample_count;
+	__u32 autogen_filter;
+	__u32 buffer_handle;
+	__u32 array_size;
+	struct drm_vmw_size base_size;
+};
+
+/**
+ * struct drm_vmw_gb_surface_create_rep
+ *
+ * @handle:            Surface handle.
+ * @backup_size:       Size of backup buffers for this surface.
+ * @buffer_handle:     Handle of backup buffer. SVGA3D_INVALID_ID if none.
+ * @buffer_size:       Actual size of the buffer identified by
+ *                     @buffer_handle
+ * @buffer_map_handle: Offset into device address space for the buffer
+ *                     identified by @buffer_handle.
+ *
+ * Part of output argument for the DRM_VMW_GB_SURFACE_REF ioctl.
+ * Output argument for the DRM_VMW_GB_SURFACE_CREATE ioctl.
+ */
+struct drm_vmw_gb_surface_create_rep {
+	__u32 handle;
+	__u32 backup_size;
+	__u32 buffer_handle;
+	__u32 buffer_size;
+	__u64 buffer_map_handle;
+};
+
+/**
+ * union drm_vmw_gb_surface_create_arg
+ *
+ * @req: Input argument as described above.
+ * @rep: Output argument as described above.
+ *
+ * Argument to the DRM_VMW_GB_SURFACE_CREATE ioctl.
+ */
+union drm_vmw_gb_surface_create_arg {
+	struct drm_vmw_gb_surface_create_rep rep;
+	struct drm_vmw_gb_surface_create_req req;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_GB_SURFACE_REF - Reference a host surface.
+ *
+ * Puts a reference on a host surface with a given handle, as previously
+ * returned by the DRM_VMW_GB_SURFACE_CREATE ioctl.
+ * A reference will make sure the surface isn't destroyed while we hold
+ * it and will allow the calling client to use the surface handle in
+ * the command stream.
+ *
+ * On successful return, the Ioctl returns the surface information given
+ * to and returned from the DRM_VMW_GB_SURFACE_CREATE ioctl.
+ */
+
+/**
+ * struct drm_vmw_gb_surface_reference_arg
+ *
+ * @creq: The data used as input when the surface was created, as described
+ *        above at "struct drm_vmw_gb_surface_create_req"
+ * @crep: Additional data output when the surface was created, as described
+ *        above at "struct drm_vmw_gb_surface_create_rep"
+ *
+ * Output Argument to the DRM_VMW_GB_SURFACE_REF ioctl.
+ */
+struct drm_vmw_gb_surface_ref_rep {
+	struct drm_vmw_gb_surface_create_req creq;
+	struct drm_vmw_gb_surface_create_rep crep;
+};
+
+/**
+ * union drm_vmw_gb_surface_reference_arg
+ *
+ * @req: Input data as described above at "struct drm_vmw_surface_arg"
+ * @rep: Output data as described above at "struct drm_vmw_gb_surface_ref_rep"
+ *
+ * Argument to the DRM_VMW_GB_SURFACE_REF Ioctl.
+ */
+union drm_vmw_gb_surface_reference_arg {
+	struct drm_vmw_gb_surface_ref_rep rep;
+	struct drm_vmw_surface_arg req;
+};
+
+
+/*************************************************************************/
+/**
+ * DRM_VMW_SYNCCPU - Sync a DMA buffer / MOB for CPU access.
+ *
+ * Idles any previously submitted GPU operations on the buffer and
+ * by default blocks command submissions that reference the buffer.
+ * If the file descriptor used to grab a blocking CPU sync is closed, the
+ * cpu sync is released.
+ * The flags argument indicates how the grab / release operation should be
+ * performed:
+ */
+
+/**
+ * enum drm_vmw_synccpu_flags - Synccpu flags:
+ *
+ * @drm_vmw_synccpu_read: Sync for read. If sync is done for read only, it's a
+ * hint to the kernel to allow command submissions that references the buffer
+ * for read-only.
+ * @drm_vmw_synccpu_write: Sync for write. Block all command submissions
+ * referencing this buffer.
+ * @drm_vmw_synccpu_dontblock: Don't wait for GPU idle, but rather return
+ * -EBUSY should the buffer be busy.
+ * @drm_vmw_synccpu_allow_cs: Allow command submission that touches the buffer
+ * while the buffer is synced for CPU. This is similar to the GEM bo idle
+ * behavior.
+ */
+enum drm_vmw_synccpu_flags {
+	drm_vmw_synccpu_read = (1 << 0),
+	drm_vmw_synccpu_write = (1 << 1),
+	drm_vmw_synccpu_dontblock = (1 << 2),
+	drm_vmw_synccpu_allow_cs = (1 << 3)
+};
+
+/**
+ * enum drm_vmw_synccpu_op - Synccpu operations:
+ *
+ * @drm_vmw_synccpu_grab:    Grab the buffer for CPU operations
+ * @drm_vmw_synccpu_release: Release a previous grab.
+ */
+enum drm_vmw_synccpu_op {
+	drm_vmw_synccpu_grab,
+	drm_vmw_synccpu_release
+};
+
+/**
+ * struct drm_vmw_synccpu_arg
+ *
+ * @op:			     The synccpu operation as described above.
+ * @handle:		     Handle identifying the buffer object.
+ * @flags:		     Flags as described above.
+ */
+struct drm_vmw_synccpu_arg {
+	enum drm_vmw_synccpu_op op;
+	enum drm_vmw_synccpu_flags flags;
+	__u32 handle;
+	__u32 pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_CREATE_EXTENDED_CONTEXT - Create a host context.
+ *
+ * Allocates a device unique context id, and queues a create context command
+ * for the host. Does not wait for host completion.
+ */
+enum drm_vmw_extended_context {
+	drm_vmw_context_legacy,
+	drm_vmw_context_dx
+};
+
+/**
+ * union drm_vmw_extended_context_arg
+ *
+ * @req: Context type.
+ * @rep: Context identifier.
+ *
+ * Argument to the DRM_VMW_CREATE_EXTENDED_CONTEXT Ioctl.
+ */
+union drm_vmw_extended_context_arg {
+	enum drm_vmw_extended_context req;
+	struct drm_vmw_context_arg rep;
+};
+
+/*************************************************************************/
+/*
+ * DRM_VMW_HANDLE_CLOSE - Close a user-space handle and release its
+ * underlying resource.
+ *
+ * Note that this ioctl is overlaid on the DRM_VMW_UNREF_DMABUF Ioctl.
+ * The ioctl arguments therefore need to be identical in layout.
+ *
+ */
+
+/**
+ * struct drm_vmw_handle_close_arg
+ *
+ * @handle: Handle to close.
+ *
+ * Argument to the DRM_VMW_HANDLE_CLOSE Ioctl.
+ */
+struct drm_vmw_handle_close_arg {
+	__u32 handle;
+	__u32 pad64;
+};
+
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif