1 files changed, 311 insertions, 0 deletions
diff --git a/include/git2/blob.h b/include/git2/blob.h
new file mode 100644
index 0000000..6db85f3
--- /dev/null
+++ b/include/git2/blob.h
@@ -0,0 +1,311 @@
+/*
+ * Copyright (C) the libgit2 contributors. All rights reserved.
+ *
+ * This file is part of libgit2, distributed under the GNU GPL v2 with
+ * a Linking Exception. For full terms see the included COPYING file.
+ */
+#ifndef INCLUDE_git_blob_h__
+#define INCLUDE_git_blob_h__
+
+#include "common.h"
+#include "types.h"
+#include "oid.h"
+#include "object.h"
+#include "buffer.h"
+
+/**
+ * @file git2/blob.h
+ * @brief Git blob load and write routines
+ * @defgroup git_blob Git blob load and write routines
+ * @ingroup Git
+ * @{
+ */
+GIT_BEGIN_DECL
+
+/**
+ * Lookup a blob object from a repository.
+ *
+ * @param blob pointer to the looked up blob
+ * @param repo the repo to use when locating the blob.
+ * @param id identity of the blob to locate.
+ * @return 0 or an error code
+ */
+GIT_EXTERN(int) git_blob_lookup(git_blob **blob, git_repository *repo, const git_oid *id);
+
+/**
+ * Lookup a blob object from a repository,
+ * given a prefix of its identifier (short id).
+ *
+ * @see git_object_lookup_prefix
+ *
+ * @param blob pointer to the looked up blob
+ * @param repo the repo to use when locating the blob.
+ * @param id identity of the blob to locate.
+ * @param len the length of the short identifier
+ * @return 0 or an error code
+ */
+GIT_EXTERN(int) git_blob_lookup_prefix(git_blob **blob, git_repository *repo, const git_oid *id, size_t len);
+
+/**
+ * Close an open blob
+ *
+ * This is a wrapper around git_object_free()
+ *
+ * IMPORTANT:
+ * It *is* necessary to call this method when you stop
+ * using a blob. Failure to do so will cause a memory leak.
+ *
+ * @param blob the blob to close
+ */
+GIT_EXTERN(void) git_blob_free(git_blob *blob);
+
+/**
+ * Get the id of a blob.
+ *
+ * @param blob a previously loaded blob.
+ * @return SHA1 hash for this blob.
+ */
+GIT_EXTERN(const git_oid *) git_blob_id(const git_blob *blob);
+
+/**
+ * Get the repository that contains the blob.
+ *
+ * @param blob A previously loaded blob.
+ * @return Repository that contains this blob.
+ */
+GIT_EXTERN(git_repository *) git_blob_owner(const git_blob *blob);
+
+/**
+ * Get a read-only buffer with the raw content of a blob.
+ *
+ * A pointer to the raw content of a blob is returned;
+ * this pointer is owned internally by the object and shall
+ * not be free'd. The pointer may be invalidated at a later
+ * time.
+ *
+ * @param blob pointer to the blob
+ * @return the pointer, or NULL on error
+ */
+GIT_EXTERN(const void *) git_blob_rawcontent(const git_blob *blob);
+
+/**
+ * Get the size in bytes of the contents of a blob
+ *
+ * @param blob pointer to the blob
+ * @return size on bytes
+ */
+GIT_EXTERN(git_object_size_t) git_blob_rawsize(const git_blob *blob);
+
+/**
+ * Flags to control the functionality of `git_blob_filter`.
+ */
+typedef enum {
+	/** When set, filters will not be applied to binary files. */
+	GIT_BLOB_FILTER_CHECK_FOR_BINARY = (1 << 0),
+
+	/**
+	 * When set, filters will not load configuration from the
+	 * system-wide `gitattributes` in `/etc` (or system equivalent).
+	 */
+	GIT_BLOB_FILTER_NO_SYSTEM_ATTRIBUTES = (1 << 1),
+
+	/**
+	 * When set, filters will be loaded from a `.gitattributes` file
+	 * in the HEAD commit.
+	 */
+	GIT_BLOB_FILTER_ATTRIBUTES_FROM_HEAD = (1 << 2),
+
+	/**
+	 * When set, filters will be loaded from a `.gitattributes` file
+	 * in the specified commit.
+	 */
+	GIT_BLOB_FILTER_ATTRIBUTES_FROM_COMMIT = (1 << 3)
+} git_blob_filter_flag_t;
+
+/**
+ * The options used when applying filter options to a file.
+ *
+ * Initialize with `GIT_BLOB_FILTER_OPTIONS_INIT`. Alternatively, you can
+ * use `git_blob_filter_options_init`.
+ *
+ */
+typedef struct {
+	int version;
+
+	/** Flags to control the filtering process, see `git_blob_filter_flag_t` above */
+	uint32_t flags;
+
+#ifdef GIT_DEPRECATE_HARD
+	void *reserved;
+#else
+	git_oid *commit_id;
+#endif
+
+	/**
+	 * The commit to load attributes from, when
+	 * `GIT_BLOB_FILTER_ATTRIBUTES_FROM_COMMIT` is specified.
+	 */
+	git_oid attr_commit_id;
+} git_blob_filter_options;
+
+#define GIT_BLOB_FILTER_OPTIONS_VERSION 1
+#define GIT_BLOB_FILTER_OPTIONS_INIT {GIT_BLOB_FILTER_OPTIONS_VERSION, GIT_BLOB_FILTER_CHECK_FOR_BINARY}
+
+/**
+ * Initialize git_blob_filter_options structure
+ *
+ * Initializes a `git_blob_filter_options` with default values. Equivalent
+ * to creating an instance with `GIT_BLOB_FILTER_OPTIONS_INIT`.
+ *
+ * @param opts The `git_blob_filter_options` struct to initialize.
+ * @param version The struct version; pass `GIT_BLOB_FILTER_OPTIONS_VERSION`.
+ * @return Zero on success; -1 on failure.
+ */
+GIT_EXTERN(int) git_blob_filter_options_init(git_blob_filter_options *opts, unsigned int version);
+
+/**
+ * Get a buffer with the filtered content of a blob.
+ *
+ * This applies filters as if the blob was being checked out to the
+ * working directory under the specified filename.  This may apply
+ * CRLF filtering or other types of changes depending on the file
+ * attributes set for the blob and the content detected in it.
+ *
+ * The output is written into a `git_buf` which the caller must free
+ * when done (via `git_buf_dispose`).
+ *
+ * If no filters need to be applied, then the `out` buffer will just
+ * be populated with a pointer to the raw content of the blob.  In
+ * that case, be careful to *not* free the blob until done with the
+ * buffer or copy it into memory you own.
+ *
+ * @param out The git_buf to be filled in
+ * @param blob Pointer to the blob
+ * @param as_path Path used for file attribute lookups, etc.
+ * @param opts Options to use for filtering the blob
+ * @return 0 on success or an error code
+ */
+GIT_EXTERN(int) git_blob_filter(
+	git_buf *out,
+	git_blob *blob,
+	const char *as_path,
+	git_blob_filter_options *opts);
+
+/**
+ * Read a file from the working folder of a repository
+ * and write it to the Object Database as a loose blob
+ *
+ * @param id return the id of the written blob
+ * @param repo repository where the blob will be written.
+ *	this repository cannot be bare
+ * @param relative_path file from which the blob will be created,
+ *	relative to the repository's working dir
+ * @return 0 or an error code
+ */
+GIT_EXTERN(int) git_blob_create_from_workdir(git_oid *id, git_repository *repo, const char *relative_path);
+
+/**
+ * Read a file from the filesystem and write its content
+ * to the Object Database as a loose blob
+ *
+ * @param id return the id of the written blob
+ * @param repo repository where the blob will be written.
+ *	this repository can be bare or not
+ * @param path file from which the blob will be created
+ * @return 0 or an error code
+ */
+GIT_EXTERN(int) git_blob_create_from_disk(git_oid *id, git_repository *repo, const char *path);
+
+/**
+ * Create a stream to write a new blob into the object db
+ *
+ * This function may need to buffer the data on disk and will in
+ * general not be the right choice if you know the size of the data
+ * to write. If you have data in memory, use
+ * `git_blob_create_from_buffer()`. If you do not, but know the size of
+ * the contents (and don't want/need to perform filtering), use
+ * `git_odb_open_wstream()`.
+ *
+ * Don't close this stream yourself but pass it to
+ * `git_blob_create_from_stream_commit()` to commit the write to the
+ * object db and get the object id.
+ *
+ * If the `hintpath` parameter is filled, it will be used to determine
+ * what git filters should be applied to the object before it is written
+ * to the object database.
+ *
+ * @param out the stream into which to write
+ * @param repo Repository where the blob will be written.
+ *        This repository can be bare or not.
+ * @param hintpath If not NULL, will be used to select data filters
+ *        to apply onto the content of the blob to be created.
+ * @return 0 or error code
+ */
+GIT_EXTERN(int) git_blob_create_from_stream(
+	git_writestream **out,
+	git_repository *repo,
+	const char *hintpath);
+
+/**
+ * Close the stream and write the blob to the object db
+ *
+ * The stream will be closed and freed.
+ *
+ * @param out the id of the new blob
+ * @param stream the stream to close
+ * @return 0 or an error code
+ */
+GIT_EXTERN(int) git_blob_create_from_stream_commit(
+	git_oid *out,
+	git_writestream *stream);
+
+/**
+ * Write an in-memory buffer to the ODB as a blob
+ *
+ * @param id return the id of the written blob
+ * @param repo repository where the blob will be written
+ * @param buffer data to be written into the blob
+ * @param len length of the data
+ * @return 0 or an error code
+ */
+GIT_EXTERN(int) git_blob_create_from_buffer(
+	git_oid *id, git_repository *repo, const void *buffer, size_t len);
+
+/**
+ * Determine if the blob content is most certainly binary or not.
+ *
+ * The heuristic used to guess if a file is binary is taken from core git:
+ * Searching for NUL bytes and looking for a reasonable ratio of printable
+ * to non-printable characters among the first 8000 bytes.
+ *
+ * @param blob The blob which content should be analyzed
+ * @return 1 if the content of the blob is detected
+ * as binary; 0 otherwise.
+ */
+GIT_EXTERN(int) git_blob_is_binary(const git_blob *blob);
+
+/**
+ * Determine if the given content is most certainly binary or not;
+ * this is the same mechanism used by `git_blob_is_binary` but only
+ * looking at raw data.
+ *
+ * @param data The blob data which content should be analyzed
+ * @param len The length of the data
+ * @return 1 if the content of the blob is detected
+ * as binary; 0 otherwise.
+ */
+GIT_EXTERN(int) git_blob_data_is_binary(const char *data, size_t len);
+
+/**
+ * Create an in-memory copy of a blob. The copy must be explicitly
+ * free'd or it will leak.
+ *
+ * @param out Pointer to store the copy of the object
+ * @param source Original object to copy
+ * @return 0.
+ */
+GIT_EXTERN(int) git_blob_dup(git_blob **out, git_blob *source);
+
+/** @} */
+GIT_END_DECL
+#endif