Adding upstream version 4:24.2.0.upstream/4%24.2.0

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 131 insertions, 0 deletions

diff --git a/chart2/source/controller/dialogs/ChartResourceGroupDlgs.cxx b/chart2/source/controller/dialogs/ChartResourceGroupDlgs.cxx
new file mode 100644
index 0000000000..91307afaad
--- /dev/null
+++ b/chart2/source/controller/dialogs/ChartResourceGroupDlgs.cxx
@@ -0,0 +1,131 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <ChartResourceGroupDlgs.hxx>
+#include <ChartTypeDialogController.hxx>
+
+#include <strings.hrc>
+#include <ResId.hxx>
+
+namespace chart
+{
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::chart2;
+
+const sal_uInt16 CUBIC_SPLINE_POS = 0;
+const sal_uInt16 B_SPLINE_POS = 1;
+
+SplinePropertiesDialog::SplinePropertiesDialog(weld::Window* pParent)
+    : GenericDialogController(pParent, "modules/schart/ui/smoothlinesdlg.ui", "SmoothLinesDialog")
+    , m_xLB_Spline_Type(m_xBuilder->weld_combo_box("SplineTypeComboBox"))
+    , m_xMF_SplineResolution(m_xBuilder->weld_spin_button("ResolutionSpinbutton"))
+    , m_xFT_SplineOrder(m_xBuilder->weld_label("PolynomialsLabel"))
+    , m_xMF_SplineOrder(m_xBuilder->weld_spin_button("PolynomialsSpinButton"))
+{
+    m_xDialog->set_title(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES));
+
+    m_xLB_Spline_Type->connect_changed(LINK(this, SplinePropertiesDialog, SplineTypeListBoxHdl));
+}
+
+void SplinePropertiesDialog::fillControls(const ChartTypeParameter& rParameter)
+{
+    switch (rParameter.eCurveStyle)
+    {
+        case CurveStyle_CUBIC_SPLINES:
+            m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS);
+            break;
+        case CurveStyle_B_SPLINES:
+            m_xLB_Spline_Type->set_active(B_SPLINE_POS);
+            break;
+        default:
+            m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS);
+            break;
+    }
+    m_xMF_SplineOrder->set_value(rParameter.nSplineOrder);
+    m_xMF_SplineResolution->set_value(rParameter.nCurveResolution);
+
+    //dis/enabling
+    m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
+    m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
+}
+
+void SplinePropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSmoothLines)
+{
+    if (!bSmoothLines)
+        rParameter.eCurveStyle = CurveStyle_LINES;
+    else if (m_xLB_Spline_Type->get_active() == CUBIC_SPLINE_POS)
+        rParameter.eCurveStyle = CurveStyle_CUBIC_SPLINES;
+    else if (m_xLB_Spline_Type->get_active() == B_SPLINE_POS)
+        rParameter.eCurveStyle = CurveStyle_B_SPLINES;
+
+    rParameter.nCurveResolution = m_xMF_SplineResolution->get_value();
+    rParameter.nSplineOrder = m_xMF_SplineOrder->get_value();
+}
+
+IMPL_LINK_NOARG(SplinePropertiesDialog, SplineTypeListBoxHdl, weld::ComboBox&, void)
+{
+    m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
+    m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
+}
+
+SteppedPropertiesDialog::SteppedPropertiesDialog(weld::Window* pParent)
+    : GenericDialogController(pParent, "modules/schart/ui/steppedlinesdlg.ui", "SteppedLinesDialog")
+    , m_xRB_Start(m_xBuilder->weld_radio_button("step_start_rb"))
+    , m_xRB_End(m_xBuilder->weld_radio_button("step_end_rb"))
+    , m_xRB_CenterX(m_xBuilder->weld_radio_button("step_center_x_rb"))
+    , m_xRB_CenterY(m_xBuilder->weld_radio_button("step_center_y_rb"))
+{
+    m_xDialog->set_title(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES));
+}
+
+void SteppedPropertiesDialog::fillControls(const ChartTypeParameter& rParameter)
+{
+    switch (rParameter.eCurveStyle)
+    {
+        case CurveStyle_STEP_END:
+            m_xRB_End->set_active(true);
+            break;
+        case CurveStyle_STEP_CENTER_X:
+            m_xRB_CenterX->set_active(true);
+            break;
+        case CurveStyle_STEP_CENTER_Y:
+            m_xRB_CenterY->set_active(true);
+            break;
+        default: // includes CurveStyle_STEP_START
+            m_xRB_Start->set_active(true);
+            break;
+    }
+}
+void SteppedPropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSteppedLines)
+{
+    if (!bSteppedLines)
+        rParameter.eCurveStyle = CurveStyle_LINES;
+    else if (m_xRB_CenterY->get_active())
+        rParameter.eCurveStyle = CurveStyle_STEP_CENTER_Y;
+    else if (m_xRB_Start->get_active())
+        rParameter.eCurveStyle = CurveStyle_STEP_START;
+    else if (m_xRB_End->get_active())
+        rParameter.eCurveStyle = CurveStyle_STEP_END;
+    else if (m_xRB_CenterX->get_active())
+        rParameter.eCurveStyle = CurveStyle_STEP_CENTER_X;
+}
+
+} //namespace chart
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */