Adding upstream version 4:24.2.0.upstream/4%24.2.0

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 310 insertions, 0 deletions

diff --git a/sc/source/ui/optdlg/tpcalc.cxx b/sc/source/ui/optdlg/tpcalc.cxx
new file mode 100644
index 0000000000..356fcd9bd1
--- /dev/null
+++ b/sc/source/ui/optdlg/tpcalc.cxx
@@ -0,0 +1,310 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+    #undef SC_DLLIMPLEMENTATION
+
+#include <vcl/svapp.hxx>
+#include <vcl/weld.hxx>
+#include <svl/numformat.hxx>
+
+#include <globstr.hrc>
+#include <scresid.hxx>
+#include <docoptio.hxx>
+#include <sc.hrc>
+#include <officecfg/Office/Calc.hxx>
+#include <svtools/restartdialog.hxx>
+
+#include <tpcalc.hxx>
+
+ScTpCalcOptions::ScTpCalcOptions(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rCoreAttrs)
+    : SfxTabPage(pPage, pController, "modules/scalc/ui/optcalculatepage.ui", "OptCalculatePage", &rCoreAttrs)
+    , pOldOptions(new ScDocOptions(
+        rCoreAttrs.Get(SID_SCDOCOPTIONS).GetDocOptions()))
+    , pLocalOptions(new ScDocOptions)
+    , m_xBtnIterate(m_xBuilder->weld_check_button("iterate"))
+    , m_xFtSteps(m_xBuilder->weld_label("stepsft"))
+    , m_xEdSteps(m_xBuilder->weld_spin_button("steps"))
+    , m_xFtEps(m_xBuilder->weld_label("minchangeft"))
+    , m_xEdEps(new ScDoubleField(m_xBuilder->weld_entry("minchange")))
+    , m_xBtnDateStd(m_xBuilder->weld_radio_button("datestd"))
+    , m_xBtnDateSc10(m_xBuilder->weld_radio_button("datesc10"))
+    , m_xBtnDate1904(m_xBuilder->weld_radio_button("date1904"))
+    , m_xBtnCase(m_xBuilder->weld_check_button("case"))
+    , m_xBtnCalc(m_xBuilder->weld_check_button("calc"))
+    , m_xBtnMatch(m_xBuilder->weld_check_button("match"))
+    , m_xBtnWildcards(m_xBuilder->weld_radio_button("formulawildcards"))
+    , m_xBtnRegex(m_xBuilder->weld_radio_button("formularegex"))
+    , m_xBtnLiteral(m_xBuilder->weld_radio_button("formulaliteral"))
+    , m_xBtnLookUp(m_xBuilder->weld_check_button("lookup"))
+    , m_xBtnGeneralPrec(m_xBuilder->weld_check_button("generalprec"))
+    , m_xFtPrec(m_xBuilder->weld_label("precft"))
+    , m_xEdPrec(m_xBuilder->weld_spin_button("prec"))
+    , m_xBtnThread(m_xBuilder->weld_check_button("threadingenabled"))
+{
+    Init();
+    SetExchangeSupport();
+}
+
+ScTpCalcOptions::~ScTpCalcOptions()
+{
+}
+
+void ScTpCalcOptions::Init()
+{
+    m_xBtnIterate->connect_toggled( LINK( this, ScTpCalcOptions, CheckClickHdl ) );
+    m_xBtnGeneralPrec->connect_toggled( LINK(this, ScTpCalcOptions, CheckClickHdl) );
+    m_xBtnDateStd->connect_toggled( LINK( this, ScTpCalcOptions, RadioClickHdl ) );
+    m_xBtnDateSc10->connect_toggled( LINK( this, ScTpCalcOptions, RadioClickHdl ) );
+    m_xBtnDate1904->connect_toggled( LINK( this, ScTpCalcOptions, RadioClickHdl ) );
+    m_xBtnThread->connect_toggled( LINK( this, ScTpCalcOptions, CheckClickHdl ) );
+}
+
+std::unique_ptr<SfxTabPage> ScTpCalcOptions::Create( weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rAttrSet )
+{
+    return std::make_unique<ScTpCalcOptions>( pPage, pController, *rAttrSet );
+}
+
+void ScTpCalcOptions::Reset(const SfxItemSet* rCoreAttrs)
+{
+    sal_uInt16  d,m;
+    sal_Int16   y;
+
+    pOldOptions.reset(new ScDocOptions(
+        rCoreAttrs->Get(SID_SCDOCOPTIONS).GetDocOptions()));
+
+    *pLocalOptions = *pOldOptions;
+
+    m_xBtnCase->set_active( !pLocalOptions->IsIgnoreCase() );
+    m_xBtnCase->set_sensitive( !officecfg::Office::Calc::Calculate::Other::CaseSensitive::isReadOnly() );
+    m_xBtnCalc->set_active( pLocalOptions->IsCalcAsShown() );
+    m_xBtnCalc->set_sensitive( !officecfg::Office::Calc::Calculate::Other::Precision::isReadOnly() );
+    m_xBtnMatch->set_active( pLocalOptions->IsMatchWholeCell() );
+    m_xBtnMatch->set_sensitive( !officecfg::Office::Calc::Calculate::Other::SearchCriteria::isReadOnly() );
+    bool bWildcards = pLocalOptions->IsFormulaWildcardsEnabled();
+    bool bRegex = pLocalOptions->IsFormulaRegexEnabled();
+    // If both, Wildcards and Regex, are set then Wildcards shall take
+    // precedence. This is also how other code calling Search handles it. Both
+    // simultaneously couldn't be set using UI but editing the configuration.
+    if (bWildcards && bRegex)
+        bRegex = false;
+    m_xBtnWildcards->set_active( bWildcards );
+    m_xBtnRegex->set_active( bRegex );
+    m_xBtnWildcards->set_sensitive( !officecfg::Office::Calc::Calculate::Other::Wildcards::isReadOnly() );
+    m_xBtnRegex->set_sensitive( !officecfg::Office::Calc::Calculate::Other::RegularExpressions::isReadOnly() );
+    m_xBtnLiteral->set_active( !bWildcards && !bRegex );
+    m_xBtnLiteral->set_sensitive( m_xBtnWildcards->get_sensitive() || m_xBtnRegex->get_sensitive() );
+    // if either regex or wildcards radio button is set and read-only, disable all three
+    if ( (!m_xBtnWildcards->get_sensitive() && bWildcards) || (!m_xBtnRegex->get_sensitive() && bRegex) )
+    {
+        m_xBtnWildcards->set_sensitive( false );
+        m_xBtnRegex->set_sensitive( false );
+        m_xBtnLiteral->set_sensitive( false );
+    }
+    m_xBtnLookUp->set_active( pLocalOptions->IsLookUpColRowNames() );
+    m_xBtnLookUp->set_sensitive( !officecfg::Office::Calc::Calculate::Other::FindLabel::isReadOnly() );
+    m_xBtnIterate->set_active( pLocalOptions->IsIter() );
+    m_xEdSteps->set_value( pLocalOptions->GetIterCount() );
+    m_xEdEps->SetValue( pLocalOptions->GetIterEps(), 6 );
+
+    pLocalOptions->GetDate( d, m, y );
+
+    switch ( y )
+    {
+        case 1899:
+            m_xBtnDateStd->set_active(true);
+            break;
+        case 1900:
+            m_xBtnDateSc10->set_active(true);
+            break;
+        case 1904:
+            m_xBtnDate1904->set_active(true);
+            break;
+    }
+
+    sal_uInt16 nPrec = pLocalOptions->GetStdPrecision();
+    if (nPrec == SvNumberFormatter::UNLIMITED_PRECISION)
+    {
+        m_xFtPrec->set_sensitive(false);
+        m_xEdPrec->set_sensitive(false);
+        m_xBtnGeneralPrec->set_active(false);
+        m_xEdPrec->set_value(0);
+    }
+    else
+    {
+        m_xBtnGeneralPrec->set_active(true);
+        m_xFtPrec->set_sensitive(true);
+        m_xEdPrec->set_sensitive(true);
+        m_xEdPrec->set_value(nPrec);
+    }
+
+    m_xBtnThread->set_sensitive( !officecfg::Office::Calc::Formula::Calculation::UseThreadedCalculationForFormulaGroups::isReadOnly() );
+    m_xBtnThread->set_active( officecfg::Office::Calc::Formula::Calculation::UseThreadedCalculationForFormulaGroups::get() );
+
+    CheckClickHdl(*m_xBtnIterate);
+}
+
+OUString ScTpCalcOptions::GetAllStrings()
+{
+    OUString sAllStrings;
+    OUString labels[]
+        = { "label5", "label1", "precft", "label2", "stepsft", "minchangeft", "label4", "label3" };
+
+    for (const auto& label : labels)
+    {
+        if (const auto& pString = m_xBuilder->weld_label(label))
+            sAllStrings += pString->get_label() + " ";
+    }
+
+    OUString checkButton[]
+        = { "case", "calc", "match", "lookup", "generalprec", "iterate", "threadingenabled" };
+
+    for (const auto& check : checkButton)
+    {
+        if (const auto& pString = m_xBuilder->weld_check_button(check))
+            sAllStrings += pString->get_label() + " ";
+    }
+
+    OUString radioButton[] = { "formulawildcards", "formularegex", "formulaliteral",
+                               "datestd",          "datesc10",     "date1904" };
+
+    for (const auto& radio : radioButton)
+    {
+        if (const auto& pString = m_xBuilder->weld_radio_button(radio))
+            sAllStrings += pString->get_label() + " ";
+    }
+
+    return sAllStrings.replaceAll("_", "");
+}
+
+bool ScTpCalcOptions::FillItemSet( SfxItemSet* rCoreAttrs )
+{
+    // every other options are updated in handlers
+    pLocalOptions->SetIterCount( static_cast<sal_uInt16>(m_xEdSteps->get_value()) );
+    pLocalOptions->SetIgnoreCase( !m_xBtnCase->get_active() );
+    pLocalOptions->SetCalcAsShown( m_xBtnCalc->get_active() );
+    pLocalOptions->SetMatchWholeCell( m_xBtnMatch->get_active() );
+    pLocalOptions->SetFormulaWildcardsEnabled( m_xBtnWildcards->get_active() );
+    pLocalOptions->SetFormulaRegexEnabled( m_xBtnRegex->get_active() );
+    pLocalOptions->SetLookUpColRowNames( m_xBtnLookUp->get_active() );
+
+    if (m_xBtnGeneralPrec->get_active())
+        pLocalOptions->SetStdPrecision(
+            static_cast<sal_uInt16>(m_xEdPrec->get_value()) );
+    else
+        pLocalOptions->SetStdPrecision( SvNumberFormatter::UNLIMITED_PRECISION );
+
+    bool bShouldEnableThreading = m_xBtnThread->get_active();
+    if (bShouldEnableThreading != officecfg::Office::Calc::Formula::Calculation::UseThreadedCalculationForFormulaGroups::get())
+    {
+        std::shared_ptr<comphelper::ConfigurationChanges> xBatch(comphelper::ConfigurationChanges::create());
+        officecfg::Office::Calc::Formula::Calculation::UseThreadedCalculationForFormulaGroups::set(bShouldEnableThreading, xBatch);
+        xBatch->commit();
+        SolarMutexGuard aGuard;
+        if (svtools::executeRestartDialog(
+                     comphelper::getProcessComponentContext(), GetFrameWeld(),
+                     svtools::RESTART_REASON_THREADING))
+            GetDialogController()->response(RET_OK);
+    }
+    if ( *pLocalOptions != *pOldOptions )
+    {
+        rCoreAttrs->Put( ScTpCalcItem( SID_SCDOCOPTIONS, *pLocalOptions ) );
+        return true;
+    }
+    else
+        return false;
+}
+
+DeactivateRC ScTpCalcOptions::DeactivatePage( SfxItemSet* pSetP )
+{
+    DeactivateRC nReturn = DeactivateRC::KeepPage;
+
+    double fEps;
+    if( m_xEdEps->GetValue( fEps ) && (fEps > 0.0) )
+    {
+        pLocalOptions->SetIterEps( fEps );
+        nReturn = DeactivateRC::LeavePage;
+    }
+
+    if ( nReturn == DeactivateRC::KeepPage )
+    {
+        std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(GetFrameWeld(), VclMessageType::Warning,
+                    VclButtonsType::Ok, ScResId(STR_INVALID_EPS)));
+        xBox->run();
+
+        m_xEdEps->grab_focus();
+    }
+    else if ( pSetP )
+        FillItemSet( pSetP );
+
+    return nReturn;
+}
+
+// Handler:
+
+IMPL_LINK( ScTpCalcOptions, RadioClickHdl, weld::Toggleable&, rBtn, void )
+{
+    if (!rBtn.get_active())
+        return;
+    if (m_xBtnDateStd->get_active())
+    {
+        pLocalOptions->SetDate( 30, 12, 1899 );
+    }
+    else if (m_xBtnDateSc10->get_active())
+    {
+        pLocalOptions->SetDate( 1, 1, 1900 );
+    }
+    else if (m_xBtnDate1904->get_active())
+    {
+        pLocalOptions->SetDate( 1, 1, 1904 );
+    }
+}
+
+IMPL_LINK(ScTpCalcOptions, CheckClickHdl, weld::Toggleable&, rBtn, void)
+{
+    if (&rBtn == m_xBtnGeneralPrec.get())
+    {
+        if (rBtn.get_active())
+        {
+            m_xEdPrec->set_sensitive(true);
+            m_xFtPrec->set_sensitive(true);
+        }
+        else
+        {
+            m_xEdPrec->set_sensitive(false);
+            m_xFtPrec->set_sensitive(false);
+        }
+    }
+    else if (&rBtn == m_xBtnIterate.get())
+    {
+        if (rBtn.get_active())
+        {
+            pLocalOptions->SetIter( true );
+            m_xFtSteps->set_sensitive(true);  m_xEdSteps->set_sensitive(true);
+            m_xFtEps->set_sensitive(true);  m_xEdEps->set_sensitive(true);
+        }
+        else
+        {
+            pLocalOptions->SetIter( false );
+            m_xFtSteps->set_sensitive(false); m_xEdSteps->set_sensitive(false);
+            m_xFtEps->set_sensitive(false); m_xEdEps->set_sensitive(false);
+        }
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */