Adding upstream version 4:24.2.0.upstream/4%24.2.0

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 330 insertions, 0 deletions

diff --git a/sw/source/uibase/shells/txtnum.cxx b/sw/source/uibase/shells/txtnum.cxx
new file mode 100644
index 0000000000..e769b7f463
--- /dev/null
+++ b/sw/source/uibase/shells/txtnum.cxx
@@ -0,0 +1,330 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <sfx2/request.hxx>
+#include <svl/eitem.hxx>
+#include <svl/stritem.hxx>
+#include <editeng/numitem.hxx>
+#include <editeng/brushitem.hxx>
+#include <osl/diagnose.h>
+#include <numrule.hxx>
+
+#include <cmdid.h>
+#include <wrtsh.hxx>
+#include <view.hxx>
+#include <viewopt.hxx>
+#include <wdocsh.hxx>
+#include <poolfmt.hxx>
+#include <textsh.hxx>
+#include <swabstdlg.hxx>
+#include <SwStyleNameMapper.hxx>
+#include <sfx2/tabdlg.hxx>
+#include <svx/nbdtmg.hxx>
+#include <svx/nbdtmgfact.hxx>
+#include <sfx2/viewfrm.hxx>
+#include <sfx2/bindings.hxx>
+#include <memory>
+
+void SwTextShell::ExecEnterNum(SfxRequest &rReq)
+{
+    //Because the record before any shell exchange.
+    switch(rReq.GetSlot())
+    {
+    case FN_NUM_NUMBERING_ON:
+    {
+        GetShell().StartAllAction();
+        const SfxBoolItem* pItem = rReq.GetArg<SfxBoolItem>(FN_PARAM_1);
+        bool bMode = !GetShell().SelectionHasNumber(); // #i29560#
+        if ( pItem )
+            bMode = pItem->GetValue();
+        else
+            rReq.AppendItem( SfxBoolItem( FN_PARAM_1, bMode ) );
+
+        if ( bMode != (GetShell().SelectionHasNumber()) ) // #i29560#
+        {
+            rReq.Done();
+            if( bMode )
+                GetShell().NumOn();
+            else
+                GetShell().NumOrBulletOff(); // #i29560#
+        }
+        bool bNewResult = GetShell().SelectionHasNumber();
+        if (bNewResult!=bMode) {
+            SfxBindings& rBindings = GetView().GetViewFrame().GetBindings();
+            SfxBoolItem aItem(FN_NUM_NUMBERING_ON,!bNewResult);
+            rBindings.SetState(aItem);
+            SfxBoolItem aNewItem(FN_NUM_NUMBERING_ON,bNewResult);
+            rBindings.SetState(aNewItem);
+        }
+        GetShell().EndAllAction();
+    }
+    break;
+    case FN_NUM_BULLET_ON:
+    {
+        GetShell().StartAllAction();
+        const SfxBoolItem* pItem = rReq.GetArg<SfxBoolItem>(FN_PARAM_1);
+        bool bMode = !GetShell().SelectionHasBullet(); // #i29560#
+        if ( pItem )
+            bMode = pItem->GetValue();
+        else
+            rReq.AppendItem( SfxBoolItem( FN_PARAM_1, bMode ) );
+
+        if ( bMode != (GetShell().SelectionHasBullet()) ) // #i29560#
+        {
+            rReq.Done();
+            if( bMode )
+                GetShell().BulletOn();
+            else
+                GetShell().NumOrBulletOff(); // #i29560#
+        }
+        bool bNewResult = GetShell().SelectionHasBullet();
+        if (bNewResult!=bMode) {
+            SfxBindings& rBindings = GetView().GetViewFrame().GetBindings();
+            SfxBoolItem aItem(FN_NUM_BULLET_ON,!bNewResult);
+            rBindings.SetState(aItem);
+            SfxBoolItem aNewItem(FN_NUM_BULLET_ON,bNewResult);
+            rBindings.SetState(aNewItem);
+        }
+        GetShell().EndAllAction();
+    }
+    break;
+
+    case FN_NUM_BULLET_OFF:
+    {
+        GetShell().StartAllAction();
+        SfxRequest aReq(GetView().GetViewFrame(), FN_NUM_BULLET_ON);
+        aReq.AppendItem(SfxBoolItem(FN_PARAM_1, false));
+        aReq.Done();
+        GetShell().NumOrBulletOff();
+        GetShell().DelNumRules();
+        GetShell().EndAllAction();
+    }
+    break;
+
+    case FN_NUMBER_BULLETS:
+    case SID_OUTLINE_BULLET:
+    {
+        SfxItemSetFixed<SID_HTML_MODE, SID_HTML_MODE,
+                     SID_ATTR_NUMBERING_RULE, SID_PARAM_CUR_NUM_LEVEL>  aSet( GetPool() );
+        SwDocShell* pDocSh = GetView().GetDocShell();
+        const bool bHtml = dynamic_cast<SwWebDocShell*>( pDocSh  ) !=  nullptr;
+        const SwNumRule* pNumRuleAtCurrentSelection = GetShell().GetNumRuleAtCurrentSelection();
+        if ( pNumRuleAtCurrentSelection != nullptr )
+        {
+            SvxNumRule aRule = pNumRuleAtCurrentSelection->MakeSvxNumRule();
+
+            //convert type of linked bitmaps from SVX_NUM_BITMAP to (SVX_NUM_BITMAP|LINK_TOKEN)
+            for ( sal_uInt16 i = 0; i < aRule.GetLevelCount(); i++ )
+            {
+                SvxNumberFormat aFormat( aRule.GetLevel( i ) );
+                if ( SVX_NUM_BITMAP == aFormat.GetNumberingType() )
+                {
+                    const SvxBrushItem* pBrush = aFormat.GetBrush();
+                    if(pBrush && !pBrush->GetGraphicLink().isEmpty())
+                        aFormat.SetNumberingType(SvxNumType(SVX_NUM_BITMAP|LINK_TOKEN));
+                    aRule.SetLevel(i, aFormat, aRule.Get(i) != nullptr);
+                }
+            }
+            if(bHtml)
+                aRule.SetFeatureFlag(SvxNumRuleFlags::ENABLE_EMBEDDED_BMP, false);
+
+            aSet.Put(SvxNumBulletItem(aRule));
+            OSL_ENSURE( GetShell().GetNumLevel() < MAXLEVEL,
+                    "<SwTextShell::ExecEnterNum()> - numbered node without valid list level. Serious defect." );
+            sal_uInt16 nLevel = GetShell().GetNumLevel();
+            if( nLevel < MAXLEVEL )
+            {
+                nLevel = 1 << nLevel;
+                aSet.Put( SfxUInt16Item( SID_PARAM_CUR_NUM_LEVEL, nLevel ) );
+            }
+        }
+        else
+        {
+            SwNumRule aRule( GetShell().GetUniqueNumRuleName(),
+                             // #i89178#
+                             numfunc::GetDefaultPositionAndSpaceMode() );
+            SvxNumRule aSvxRule = aRule.MakeSvxNumRule();
+            const bool bRightToLeft = GetShell().IsInRightToLeftText();
+
+            if ( bHtml || bRightToLeft )
+            {
+                for ( sal_uInt8 n = 0; n < MAXLEVEL; ++n )
+                {
+                    SvxNumberFormat aFormat( aSvxRule.GetLevel( n ) );
+                    if ( n && bHtml )
+                    {
+                        // 1/2" for HTML
+                        aFormat.SetAbsLSpace(n * 720);
+                    }
+                    // #i38904#  Default alignment for
+                    // numbering/bullet should be rtl in rtl paragraph:
+                    if ( bRightToLeft )
+                    {
+                        aFormat.SetNumAdjust( SvxAdjust::Right );
+                    }
+                    aSvxRule.SetLevel( n, aFormat, false );
+                }
+                aSvxRule.SetFeatureFlag(SvxNumRuleFlags::ENABLE_EMBEDDED_BMP, false);
+            }
+            aSet.Put( SvxNumBulletItem( std::move(aSvxRule) ) );
+        }
+
+        aSet.Put( SfxBoolItem( SID_PARAM_NUM_PRESET,false ));
+
+        // Before the dialogue of the HTML mode will be dropped at the Docshell.
+        pDocSh->PutItem(SfxUInt16Item(SID_HTML_MODE, ::GetHtmlMode(pDocSh)));
+
+        SwAbstractDialogFactory* pFact = SwAbstractDialogFactory::Create();
+        weld::Window *pParent = rReq.GetFrameWeld();
+        VclPtr<AbstractNumBulletDialog> pDlg(pFact->CreateSvxNumBulletTabDialog(pParent, aSet, GetShell()));
+        const SfxStringItem* pPageItem = rReq.GetArg<SfxStringItem>(FN_PARAM_1);
+        if ( pPageItem )
+            pDlg->SetCurPageId( pPageItem->GetValue() );
+
+        auto pRequest = std::make_shared<SfxRequest>(rReq);
+        rReq.Ignore(); // the 'old' request is not relevant any more
+
+        pDlg->StartExecuteAsync([pDlg, pNumRuleAtCurrentSelection, pRequest, this](sal_Int32 nResult){
+            if (RET_OK == nResult)
+            {
+                const SvxNumBulletItem* pBulletItem = pDlg->GetOutputItemSet()->GetItemIfSet(SID_ATTR_NUMBERING_RULE, false);
+                if (pBulletItem)
+                {
+                    pRequest->AppendItem(*pBulletItem);
+                    pRequest->Done();
+                    SvxNumRule& rSetRule = const_cast<SvxNumRule&>(pBulletItem->GetNumRule());
+                    rSetRule.UnLinkGraphics();
+                    SwNumRule aSetRule(pNumRuleAtCurrentSelection != nullptr
+                                       ? pNumRuleAtCurrentSelection->GetName()
+                                       : GetShell().GetUniqueNumRuleName(),
+                        numfunc::GetDefaultPositionAndSpaceMode());
+                    aSetRule.SetSvxRule(rSetRule, GetShell().GetDoc());
+                    aSetRule.SetAutoRule(true);
+                    // No start of new list, if an existing list style is edited.
+                    // Otherwise start a new list.
+                    const bool bCreateList = (pNumRuleAtCurrentSelection == nullptr);
+                    GetShell().SetCurNumRule(aSetRule, bCreateList);
+                }
+                // If the Dialog was leaved with OK but nothing was chosen then the
+                // numbering must be at least activated, if it is not already.
+                else if (pNumRuleAtCurrentSelection == nullptr
+                         && (pBulletItem = pDlg->GetInputItemSet()->GetItemIfSet(SID_ATTR_NUMBERING_RULE, false)))
+                {
+                    pRequest->AppendItem(*pBulletItem);
+                    pRequest->Done();
+                    const SvxNumRule& rSetRule = pBulletItem->GetNumRule();
+                    SwNumRule aSetRule(
+                        GetShell().GetUniqueNumRuleName(),
+                        numfunc::GetDefaultPositionAndSpaceMode());
+                    aSetRule.SetSvxRule(rSetRule, GetShell().GetDoc());
+                    aSetRule.SetAutoRule(true);
+                    // start new list
+                    GetShell().SetCurNumRule(aSetRule, true);
+                }
+            }
+            else if (RET_USER == nResult)
+                GetShell().DelNumRules();
+            pDlg->disposeOnce();
+        });
+    }
+    break;
+
+    default:
+        OSL_FAIL("wrong dispatcher");
+        return;
+    }
+}
+
+
+void SwTextShell::ExecSetNumber(SfxRequest const &rReq)
+{
+    const sal_uInt16 nSlot = rReq.GetSlot();
+    switch ( nSlot )
+    {
+    case FN_SVX_SET_NUMBER:
+    case FN_SVX_SET_BULLET:
+    case FN_SVX_SET_OUTLINE:
+        {
+            const SfxUInt16Item* pItem = rReq.GetArg<SfxUInt16Item>(nSlot);
+            if ( pItem != nullptr )
+            {
+                const sal_uInt16 nChosenItemIdx = pItem->GetValue();
+                svx::sidebar::NBOType nNBOType = svx::sidebar::NBOType::Bullets;
+                if ( nSlot == FN_SVX_SET_NUMBER )
+                    nNBOType = svx::sidebar::NBOType::Numbering;
+                else if ( nSlot == FN_SVX_SET_OUTLINE )
+                    nNBOType = svx::sidebar::NBOType::Outline;
+
+                svx::sidebar::NBOTypeMgrBase* pNBOTypeMgr = svx::sidebar::NBOutlineTypeMgrFact::CreateInstance( nNBOType );
+
+                if ( pNBOTypeMgr != nullptr )
+                {
+                    const SwNumRule* pNumRuleAtCurrentSelection = GetShell().GetNumRuleAtCurrentSelection();
+                    sal_uInt16 nActNumLvl = USHRT_MAX;
+                    if ( pNumRuleAtCurrentSelection != nullptr )
+                    {
+                        const sal_uInt16 nLevel = GetShell().GetNumLevel();
+                        if ( nLevel < MAXLEVEL )
+                        {
+                            nActNumLvl = 1 << nLevel;
+                        }
+                    }
+                    SwNumRule aNewNumRule(
+                        pNumRuleAtCurrentSelection != nullptr ? pNumRuleAtCurrentSelection->GetName() : GetShell().GetUniqueNumRuleName(),
+                        numfunc::GetDefaultPositionAndSpaceMode() );
+                    SvxNumRule aNewSvxNumRule = pNumRuleAtCurrentSelection != nullptr
+                                                    ? pNumRuleAtCurrentSelection->MakeSvxNumRule()
+                                                    : aNewNumRule.MakeSvxNumRule();
+
+                    OUString aNumCharFormat, aBulletCharFormat;
+                    SwStyleNameMapper::FillUIName( RES_POOLCHR_NUM_LEVEL, aNumCharFormat );
+                    SwStyleNameMapper::FillUIName( RES_POOLCHR_BULLET_LEVEL, aBulletCharFormat );
+
+                    SfxAllItemSet aSet( GetPool() );
+                    aSet.Put( SfxStringItem( SID_NUM_CHAR_FMT, aNumCharFormat ) );
+                    aSet.Put( SfxStringItem( SID_BULLET_CHAR_FMT, aBulletCharFormat ) );
+                    aSet.Put( SvxNumBulletItem( aNewSvxNumRule, SID_ATTR_NUMBERING_RULE ) );
+
+                    pNBOTypeMgr->SetItems( &aSet );
+                    pNBOTypeMgr->ApplyNumRule( aNewSvxNumRule, nChosenItemIdx - 1, nActNumLvl );
+
+                    aNewNumRule.SetSvxRule( aNewSvxNumRule, GetShell().GetDoc() );
+                    aNewNumRule.SetAutoRule( true );
+                    const bool bCreateNewList = ( pNumRuleAtCurrentSelection == nullptr );
+                    GetShell().SetCurNumRule( aNewNumRule, bCreateNewList );
+                }
+            }
+            else if (nSlot == FN_SVX_SET_OUTLINE)
+            {
+                // no outline provided: launch dialog to request a specific outline
+                SfxBindings& rBindings = GetView().GetViewFrame().GetBindings();
+                const SfxStringItem aPage(FN_PARAM_1, "outlinenum");
+                const SfxPoolItem* aItems[] = { &aPage, nullptr };
+                rBindings.Execute(SID_OUTLINE_BULLET, aItems);
+            }
+        }
+        break;
+
+    default:
+        OSL_ENSURE(false, "wrong Dispatcher");
+        return;
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */