diff options
Diffstat (limited to '')
| -rw-r--r-- | cui/source/options/optlanguagetool.cxx | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/cui/source/options/optlanguagetool.cxx b/cui/source/options/optlanguagetool.cxx new file mode 100644 index 0000000000..8c56a40e72 --- /dev/null +++ b/cui/source/options/optlanguagetool.cxx @@ -0,0 +1,161 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include "optlanguagetool.hxx" +#include <officecfg/Office/Linguistic.hxx> +#include <sal/log.hxx> +#include <dialmgr.hxx> +#include <strings.hrc> + +using LanguageToolCfg = officecfg::Office::Linguistic::GrammarChecking::LanguageTool; +constexpr OUString LANGUAGETOOL_DEFAULT_URL = u"https://api.languagetool.org/v2"_ustr; + +OptLanguageToolTabPage::OptLanguageToolTabPage(weld::Container* pPage, + weld::DialogController* pController, + const SfxItemSet& rSet) + : SfxTabPage(pPage, pController, "cui/ui/langtoolconfigpage.ui", "OptLangToolPage", &rSet) + , m_xBaseURLED(m_xBuilder->weld_entry("baseurl")) + , m_xBaseURLImg(m_xBuilder->weld_widget("lockbaseurl")) + , m_xUsernameED(m_xBuilder->weld_entry("username")) + , m_xUsernameImg(m_xBuilder->weld_widget("lockusername")) + , m_xApiKeyED(m_xBuilder->weld_entry("apikey")) + , m_xApiKeyImg(m_xBuilder->weld_widget("lockapikey")) + , m_xRestProtocol(m_xBuilder->weld_entry("restprotocol")) + , m_xRestProtocolImg(m_xBuilder->weld_widget("lockrestprotocol")) + , m_xActivateBox(m_xBuilder->weld_check_button("activate")) + , m_xActivateBoxImg(m_xBuilder->weld_widget("lockactivate")) + , m_xSSLDisableVerificationBox(m_xBuilder->weld_check_button("verifyssl")) + , m_xSSLDisableVerificationBoxImg(m_xBuilder->weld_widget("lockverifyssl")) + , m_xApiSettingsFrame(m_xBuilder->weld_frame("apisettings")) +{ + m_xActivateBox->connect_toggled(LINK(this, OptLanguageToolTabPage, CheckHdl)); + EnableControls(LanguageToolCfg::IsEnabled::get()); + + // tdf#150494 Set default values as placeholder text + m_xBaseURLED->set_placeholder_text(CuiResId(RID_LANGUAGETOOL_LEAVE_EMPTY)); + m_xUsernameED->set_placeholder_text(CuiResId(RID_LANGUAGETOOL_LEAVE_EMPTY)); + m_xApiKeyED->set_placeholder_text(CuiResId(RID_LANGUAGETOOL_LEAVE_EMPTY)); + m_xRestProtocol->set_placeholder_text(CuiResId(RID_LANGUAGETOOL_REST_LEAVE_EMPTY)); +} + +OptLanguageToolTabPage::~OptLanguageToolTabPage() {} + +void OptLanguageToolTabPage::EnableControls(bool bEnable) +{ + if (bEnable != LanguageToolCfg::IsEnabled::get()) + { + auto batch(comphelper::ConfigurationChanges::create()); + LanguageToolCfg::IsEnabled::set(bEnable, batch); + batch->commit(); + } + m_xApiSettingsFrame->set_visible(bEnable); + m_xActivateBox->set_active(bEnable); + m_xActivateBox->set_sensitive(!LanguageToolCfg::IsEnabled::isReadOnly()); + m_xActivateBoxImg->set_visible(LanguageToolCfg::IsEnabled::isReadOnly()); + m_xSSLDisableVerificationBox->set_active(!LanguageToolCfg::SSLCertVerify::get()); + m_xSSLDisableVerificationBox->set_sensitive(!LanguageToolCfg::SSLCertVerify::isReadOnly()); + m_xSSLDisableVerificationBoxImg->set_visible(LanguageToolCfg::SSLCertVerify::isReadOnly()); +} + +IMPL_LINK_NOARG(OptLanguageToolTabPage, CheckHdl, weld::Toggleable&, void) +{ + EnableControls(m_xActivateBox->get_active()); +} + +void OptLanguageToolTabPage::Reset(const SfxItemSet*) +{ + // tdf#150494 If no URL has been set, use the default URL + OUString aBaseURL = LanguageToolCfg::BaseURL::get().value_or(""); + if (aBaseURL.isEmpty()) + m_xBaseURLED->set_text(LANGUAGETOOL_DEFAULT_URL); + else + m_xBaseURLED->set_text(aBaseURL); + + m_xBaseURLED->set_sensitive(!LanguageToolCfg::BaseURL::isReadOnly()); + m_xBaseURLImg->set_visible(LanguageToolCfg::BaseURL::isReadOnly()); + + m_xUsernameED->set_text(LanguageToolCfg::Username::get().value_or("")); + m_xUsernameED->set_sensitive(!LanguageToolCfg::Username::isReadOnly()); + m_xUsernameImg->set_visible(LanguageToolCfg::Username::isReadOnly()); + + m_xApiKeyED->set_text(LanguageToolCfg::ApiKey::get().value_or("")); + m_xApiKeyED->set_sensitive(!LanguageToolCfg::ApiKey::isReadOnly()); + m_xApiKeyImg->set_visible(LanguageToolCfg::ApiKey::isReadOnly()); + + m_xRestProtocol->set_text(LanguageToolCfg::RestProtocol::get().value_or("")); + m_xRestProtocol->set_sensitive(!LanguageToolCfg::RestProtocol::isReadOnly()); + m_xRestProtocolImg->set_visible(LanguageToolCfg::RestProtocol::isReadOnly()); + + m_xSSLDisableVerificationBox->set_active(!LanguageToolCfg::SSLCertVerify::get()); + m_xSSLDisableVerificationBox->set_sensitive(!LanguageToolCfg::SSLCertVerify::isReadOnly()); + m_xSSLDisableVerificationBoxImg->set_visible(LanguageToolCfg::SSLCertVerify::isReadOnly()); +} + +OUString OptLanguageToolTabPage::GetAllStrings() +{ + OUString sAllStrings; + OUString labels[] = { "langtoolsettings", "disclaimer", "apisettingsheader", "base", + "urldesc", "usernamelbl", "usernamedesc", "apikeylbl", + "apikeydesc", "restlbl", "restdesc" }; + + for (const auto& label : labels) + { + if (const auto& pString = m_xBuilder->weld_label(label)) + sAllStrings += pString->get_label() + " "; + } + + OUString checkButton[] = { "activate", "verifyssl" }; + + for (const auto& check : checkButton) + { + if (const auto& pString = m_xBuilder->weld_check_button(check)) + sAllStrings += pString->get_label() + " "; + } + + if (const auto& pString = m_xBuilder->weld_link_button("policy")) + sAllStrings += pString->get_label() + " "; + + return sAllStrings.replaceAll("_", ""); +} + +bool OptLanguageToolTabPage::FillItemSet(SfxItemSet*) +{ + auto batch(comphelper::ConfigurationChanges::create()); + + // tdf#150494 If no URL has been set, then save the default URL + OUString aBaseURL = m_xBaseURLED->get_text(); + if (aBaseURL.isEmpty()) + LanguageToolCfg::BaseURL::set(LANGUAGETOOL_DEFAULT_URL, batch); + else + LanguageToolCfg::BaseURL::set(aBaseURL, batch); + + LanguageToolCfg::Username::set(m_xUsernameED->get_text(), batch); + LanguageToolCfg::ApiKey::set(m_xApiKeyED->get_text(), batch); + LanguageToolCfg::RestProtocol::set(m_xRestProtocol->get_text(), batch); + LanguageToolCfg::SSLCertVerify::set(!m_xSSLDisableVerificationBox->get_active(), batch); + batch->commit(); + return false; +} + +std::unique_ptr<SfxTabPage> OptLanguageToolTabPage::Create(weld::Container* pPage, + weld::DialogController* pController, + const SfxItemSet* rAttrSet) +{ + return std::make_unique<OptLanguageToolTabPage>(pPage, pController, *rAttrSet); +} |