summaryrefslogtreecommitdiffstats
path: root/cui/source/tabpages/tplnedef.cxx
diff options
context:
space:
mode:
Diffstat (limited to 'cui/source/tabpages/tplnedef.cxx')
-rw-r--r--cui/source/tabpages/tplnedef.cxx840
1 files changed, 840 insertions, 0 deletions
diff --git a/cui/source/tabpages/tplnedef.cxx b/cui/source/tabpages/tplnedef.cxx
new file mode 100644
index 0000000000..66fea1aba4
--- /dev/null
+++ b/cui/source/tabpages/tplnedef.cxx
@@ -0,0 +1,840 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ * Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements. See the NOTICE file distributed
+ * with this work for additional information regarding copyright
+ * ownership. The ASF licenses this file to you under the Apache
+ * License, Version 2.0 (the "License"); you may not use this file
+ * except in compliance with the License. You may obtain a copy of
+ * the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <tools/urlobj.hxx>
+#include <vcl/svapp.hxx>
+#include <vcl/weld.hxx>
+#include <unotools/pathoptions.hxx>
+#include <sfx2/filedlghelper.hxx>
+#include <com/sun/star/ui/dialogs/TemplateDescription.hpp>
+
+#include <strings.hrc>
+
+#include <svx/xlineit0.hxx>
+#include <svx/xlnwtit.hxx>
+#include <svx/xlndsit.hxx>
+#include <svx/xlnclit.hxx>
+#include <svx/xtable.hxx>
+
+#include <svx/dlgctrl.hxx>
+#include <cuitabline.hxx>
+#include <defdlgname.hxx>
+#include <svx/svxdlg.hxx>
+#include <dialmgr.hxx>
+#include <svx/dlgutil.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/strings.hrc>
+#include <svx/svxids.hrc>
+#include <cuitabarea.hxx>
+#include <svtools/unitconv.hxx>
+#include <osl/diagnose.h>
+
+#define XOUT_WIDTH 150
+
+using namespace com::sun::star;
+
+
+SvxLineDefTabPage::SvxLineDefTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs)
+ : SfxTabPage(pPage, pController, "cui/ui/linestyletabpage.ui", "LineStylePage", &rInAttrs)
+ , rOutAttrs(rInAttrs)
+ , aXLineAttr(rInAttrs.GetPool())
+ , rXLSet(aXLineAttr.GetItemSet())
+ , pnDashListState(nullptr)
+ , pPageType(nullptr)
+ , nDlgType(0)
+ , pPosDashLb(nullptr)
+ , m_xLbLineStyles(new SvxLineLB(m_xBuilder->weld_combo_box("LB_LINESTYLES")))
+ , m_xLbType1(m_xBuilder->weld_combo_box("LB_TYPE_1"))
+ , m_xLbType2(m_xBuilder->weld_combo_box("LB_TYPE_2"))
+ , m_xNumFldNumber1(m_xBuilder->weld_spin_button("NUM_FLD_1"))
+ , m_xNumFldNumber2(m_xBuilder->weld_spin_button("NUM_FLD_2"))
+ , m_xMtrLength1(m_xBuilder->weld_metric_spin_button("MTR_FLD_LENGTH_1", FieldUnit::CM))
+ , m_xMtrLength2(m_xBuilder->weld_metric_spin_button("MTR_FLD_LENGTH_2", FieldUnit::CM))
+ , m_xMtrDistance(m_xBuilder->weld_metric_spin_button("MTR_FLD_DISTANCE", FieldUnit::CM))
+ , m_xCbxSynchronize(m_xBuilder->weld_check_button("CBX_SYNCHRONIZE"))
+ , m_xBtnAdd(m_xBuilder->weld_button("BTN_ADD"))
+ , m_xBtnModify(m_xBuilder->weld_button("BTN_MODIFY"))
+ , m_xBtnDelete(m_xBuilder->weld_button("BTN_DELETE"))
+ , m_xBtnLoad(m_xBuilder->weld_button("BTN_LOAD"))
+ , m_xBtnSave(m_xBuilder->weld_button("BTN_SAVE"))
+ , m_xCtlPreview(new weld::CustomWeld(*m_xBuilder, "CTL_PREVIEW", m_aCtlPreview))
+{
+ // this page needs ExchangeSupport
+ SetExchangeSupport();
+
+ // adjust metric
+ eFUnit = GetModuleFieldUnit( rInAttrs );
+
+ switch ( eFUnit )
+ {
+ case FieldUnit::M:
+ case FieldUnit::KM:
+ eFUnit = FieldUnit::MM;
+ break;
+ default: ; //prevent warning
+ }
+ SetFieldUnit(*m_xMtrDistance, eFUnit);
+ SetFieldUnit(*m_xMtrLength1, eFUnit);
+ SetFieldUnit(*m_xMtrLength2, eFUnit);
+
+ // determine PoolUnit
+ SfxItemPool* pPool = rOutAttrs.GetPool();
+ DBG_ASSERT( pPool, "Where is the pool?" );
+ ePoolUnit = pPool->GetMetric( SID_ATTR_LINE_WIDTH );
+
+ rXLSet.Put( XLineStyleItem(drawing::LineStyle_DASH) );
+ rXLSet.Put( XLineWidthItem(XOUT_WIDTH) );
+ rXLSet.Put( XLineDashItem( OUString(), XDash( css::drawing::DashStyle_RECT, 3, 7, 2, 40, 15 ) ) );
+ rXLSet.Put( XLineColorItem(OUString(), COL_BLACK) );
+
+ // #i34740#
+ m_aCtlPreview.SetLineAttributes(aXLineAttr.GetItemSet());
+
+ m_xBtnAdd->connect_clicked(LINK(this, SvxLineDefTabPage, ClickAddHdl_Impl));
+ m_xBtnModify->connect_clicked(LINK(this, SvxLineDefTabPage, ClickModifyHdl_Impl));
+ m_xBtnDelete->connect_clicked(LINK(this, SvxLineDefTabPage, ClickDeleteHdl_Impl));
+ m_xBtnLoad->connect_clicked(LINK(this, SvxLineDefTabPage, ClickLoadHdl_Impl));
+ m_xBtnSave->connect_clicked(LINK(this, SvxLineDefTabPage, ClickSaveHdl_Impl));
+
+ m_xNumFldNumber1->connect_value_changed(LINK(this, SvxLineDefTabPage, ChangeNumber1Hdl_Impl));
+ m_xNumFldNumber2->connect_value_changed(LINK(this, SvxLineDefTabPage, ChangeNumber2Hdl_Impl));
+ m_xLbLineStyles->connect_changed(LINK(this, SvxLineDefTabPage, SelectLinestyleListBoxHdl_Impl));
+
+ // #i122042# switch off default adding of 'none' and 'solid' entries
+ // for this ListBox; we want to select only editable/dashed styles
+ m_xLbLineStyles->setAddStandardFields(false);
+
+ // absolute (in mm) or relative (in %)
+ m_xCbxSynchronize->connect_toggled(LINK(this, SvxLineDefTabPage, ChangeMetricHdl_Impl));
+
+ // preview must be updated when there's something changed
+ Link<weld::ComboBox&, void> aLink = LINK(this, SvxLineDefTabPage, SelectTypeListBoxHdl_Impl);
+ m_xLbType1->connect_changed(aLink);
+ m_xLbType2->connect_changed(aLink);
+ Link<weld::MetricSpinButton&,void> aLink2 = LINK( this, SvxLineDefTabPage, ChangePreviewHdl_Impl );
+ m_xMtrLength1->connect_value_changed(aLink2);
+ m_xMtrLength2->connect_value_changed(aLink2);
+ m_xMtrDistance->connect_value_changed(aLink2);
+
+ pDashList = nullptr;
+}
+
+SvxLineDefTabPage::~SvxLineDefTabPage()
+{
+ m_xCtlPreview.reset();
+ m_xLbLineStyles.reset();
+}
+
+void SvxLineDefTabPage::Construct()
+{
+ // Line style fill; do *not* add default fields here
+ m_xLbLineStyles->Fill( pDashList );
+}
+
+void SvxLineDefTabPage::ActivatePage( const SfxItemSet& )
+{
+ if( nDlgType != 0 ) // area dialog
+ return;
+
+ // ActivatePage() is called before the dialog receives PageCreated() !!!
+ if( !pDashList.is() )
+ return;
+
+ if (*pPageType == PageType::Gradient &&
+ *pPosDashLb != -1)
+ {
+ m_xLbLineStyles->set_active(*pPosDashLb);
+ }
+ // so that a possibly existing line style is discarded
+ SelectLinestyleHdl_Impl( nullptr );
+
+ // determining (and possibly cutting) the name
+ // and displaying it in the GroupBox
+// OUString aString( CuiResId( RID_CUISTR_TABLE ) );
+// aString += ": ";
+ INetURLObject aURL( pDashList->GetPath() );
+
+ aURL.Append( pDashList->GetName() );
+ DBG_ASSERT( aURL.GetProtocol() != INetProtocol::NotValid, "invalid URL" );
+
+ *pPageType = PageType::Area; // 2
+ *pPosDashLb = -1;
+}
+
+
+DeactivateRC SvxLineDefTabPage::DeactivatePage( SfxItemSet* _pSet )
+{
+ CheckChanges_Impl();
+
+ if( _pSet )
+ FillItemSet( _pSet );
+
+ return DeactivateRC::LeavePage;
+}
+
+void SvxLineDefTabPage::CheckChanges_Impl()
+{
+ // is here used to NOT lose changes
+ //css::drawing::DashStyle eXDS;
+
+ if( m_xNumFldNumber1->get_value_changed_from_saved() ||
+ m_xMtrLength1->get_value_changed_from_saved() ||
+ m_xLbType1->get_value_changed_from_saved() ||
+ m_xNumFldNumber2->get_value_changed_from_saved() ||
+ m_xMtrLength2->get_value_changed_from_saved() ||
+ m_xLbType2->get_value_changed_from_saved() ||
+ m_xMtrDistance->get_value_changed_from_saved() )
+ {
+ std::unique_ptr<weld::MessageDialog> xMessDlg(Application::CreateMessageDialog(GetFrameWeld(),
+ VclMessageType::Warning, VclButtonsType::Cancel,
+ CuiResId(RID_CUISTR_ASK_CHANGE_LINESTYLE)));
+ xMessDlg->set_title(SvxResId(RID_SVXSTR_LINESTYLE));
+ xMessDlg->add_button(CuiResId(RID_CUISTR_CHANGE), RET_BTN_1);
+ xMessDlg->add_button(CuiResId(RID_CUISTR_ADD), RET_BTN_2);
+
+ short nRet = xMessDlg->run();
+
+ switch( nRet )
+ {
+ case RET_BTN_1:
+ {
+ ClickModifyHdl_Impl(*m_xBtnModify);
+ }
+ break;
+
+ case RET_BTN_2:
+ {
+ ClickAddHdl_Impl(*m_xBtnAdd);
+ }
+ break;
+
+ case RET_CANCEL:
+ break;
+ }
+ }
+
+ int nPos = m_xLbLineStyles->get_active();
+ if (nPos != -1)
+ {
+ *pPosDashLb = nPos;
+ }
+}
+
+
+bool SvxLineDefTabPage::FillItemSet( SfxItemSet* rAttrs )
+{
+ if( nDlgType == 0 ) // line dialog
+ {
+ if( *pPageType == PageType::Hatch )
+ {
+ FillDash_Impl();
+
+ OUString aString(m_xLbLineStyles->get_active_text());
+ rAttrs->Put( XLineStyleItem( drawing::LineStyle_DASH ) );
+ rAttrs->Put( XLineDashItem( aString, aDash ) );
+ }
+ }
+ return true;
+}
+
+
+void SvxLineDefTabPage::Reset( const SfxItemSet* rAttrs )
+{
+ if( rAttrs->GetItemState( GetWhich( XATTR_LINESTYLE ) ) != SfxItemState::DONTCARE )
+ {
+ drawing::LineStyle eXLS = rAttrs->Get( GetWhich( XATTR_LINESTYLE ) ).GetValue();
+
+ switch( eXLS )
+ {
+ case drawing::LineStyle_NONE:
+ case drawing::LineStyle_SOLID:
+ m_xLbLineStyles->set_active(0);
+ break;
+ case drawing::LineStyle_DASH:
+ {
+ const XLineDashItem& rDashItem = rAttrs->Get( XATTR_LINEDASH );
+ aDash = rDashItem.GetDashValue();
+
+ m_xLbLineStyles->set_active(-1);
+ m_xLbLineStyles->set_active_text(rDashItem.GetName());
+ break;
+ }
+ default:
+ break;
+ }
+ }
+ SelectLinestyleHdl_Impl( nullptr );
+
+ // determine button state
+ if( pDashList->Count() )
+ {
+ m_xBtnModify->set_sensitive(true);
+ m_xBtnDelete->set_sensitive(true);
+ m_xBtnSave->set_sensitive(true);
+ }
+ else
+ {
+ m_xBtnModify->set_sensitive(false);
+ m_xBtnDelete->set_sensitive(false);
+ m_xBtnSave->set_sensitive(false);
+ }
+}
+
+std::unique_ptr<SfxTabPage> SvxLineDefTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rOutAttrs )
+{
+ return std::make_unique<SvxLineDefTabPage>(pPage, pController, *rOutAttrs);
+}
+
+IMPL_LINK(SvxLineDefTabPage, SelectLinestyleListBoxHdl_Impl, weld::ComboBox&, rListBox, void)
+{
+ SelectLinestyleHdl_Impl(&rListBox);
+}
+
+void SvxLineDefTabPage::SelectLinestyleHdl_Impl(const weld::ComboBox* p)
+{
+ if(!pDashList->Count())
+ return;
+
+ int nTmp = m_xLbLineStyles->get_active();
+ if (nTmp == -1)
+ {
+ OSL_ENSURE(false, "OOps, non-existent LineDash selected (!)");
+ nTmp = 1;
+ }
+
+ aDash = pDashList->GetDash( nTmp )->GetDash();
+
+ FillDialog_Impl();
+
+ rXLSet.Put( XLineDashItem( OUString(), aDash ) );
+
+ // #i34740#
+ m_aCtlPreview.SetLineAttributes(aXLineAttr.GetItemSet());
+ m_aCtlPreview.Invalidate();
+
+ // Is not set before, in order to take the new style
+ // only if there was an entry selected in the ListBox.
+ // If it was called via Reset(), then p is == NULL
+ if( p )
+ *pPageType = PageType::Hatch;
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ChangePreviewHdl_Impl, weld::MetricSpinButton&, void)
+{
+ FillDash_Impl();
+ m_aCtlPreview.Invalidate();
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ChangeNumber1Hdl_Impl, weld::SpinButton&, void)
+{
+ if (m_xNumFldNumber1->get_value() == 0)
+ {
+ m_xNumFldNumber2->set_min(1);
+ }
+ else
+ {
+ m_xNumFldNumber2->set_min(0);
+ }
+
+ ChangePreviewHdl_Impl(*m_xMtrLength1);
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ChangeNumber2Hdl_Impl, weld::SpinButton&, void)
+{
+ if (m_xNumFldNumber2->get_value() == 0)
+ {
+ m_xNumFldNumber1->set_min(1);
+ }
+ else
+ {
+ m_xNumFldNumber1->set_min(0);
+ }
+
+ ChangePreviewHdl_Impl(*m_xMtrLength1);
+}
+
+IMPL_LINK( SvxLineDefTabPage, ChangeMetricHdl_Impl, weld::Toggleable&, r, void)
+{
+ ChangeMetricHdl_Impl(&r);
+}
+
+void SvxLineDefTabPage::ChangeMetricHdl_Impl(const weld::Toggleable* p)
+{
+ if( !m_xCbxSynchronize->get_active() && m_xMtrLength1->get_unit() != eFUnit )
+ {
+ tools::Long nTmp1, nTmp2, nTmp3;
+
+ // was changed with Control
+ if( p )
+ {
+ nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit ) * XOUT_WIDTH / 100;
+ nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit ) * XOUT_WIDTH / 100;
+ nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit ) * XOUT_WIDTH / 100;
+ }
+ else
+ {
+ nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit );
+ nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit );
+ nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit );
+ }
+ m_xMtrLength1->set_digits(2);
+ m_xMtrLength2->set_digits(2);
+ m_xMtrDistance->set_digits(2);
+
+ // adjust metric
+ m_xMtrLength1->set_unit(eFUnit);
+ m_xMtrLength2->set_unit(eFUnit);
+ m_xMtrDistance->set_unit(eFUnit);
+
+ // tdf#126736 max 5cm
+ m_xMtrLength1->set_range(0, 500, FieldUnit::CM);
+ m_xMtrLength2->set_range(0, 500, FieldUnit::CM);
+ m_xMtrDistance->set_range(0, 500, FieldUnit::CM);
+
+ SetMetricValue( *m_xMtrLength1, nTmp1, ePoolUnit );
+ SetMetricValue( *m_xMtrLength2, nTmp2, ePoolUnit );
+ SetMetricValue( *m_xMtrDistance, nTmp3, ePoolUnit );
+ }
+ else if( m_xCbxSynchronize->get_active() && m_xMtrLength1->get_unit() != FieldUnit::PERCENT )
+ {
+ tools::Long nTmp1, nTmp2, nTmp3;
+
+ // was changed with Control
+ if( p )
+ {
+ nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit ) * 100 / XOUT_WIDTH;
+ nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit ) * 100 / XOUT_WIDTH;
+ nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit ) * 100 / XOUT_WIDTH;
+ }
+ else
+ {
+ nTmp1 = GetCoreValue( *m_xMtrLength1, ePoolUnit );
+ nTmp2 = GetCoreValue( *m_xMtrLength2, ePoolUnit );
+ nTmp3 = GetCoreValue( *m_xMtrDistance, ePoolUnit );
+ }
+
+ m_xMtrLength1->set_digits(0);
+ m_xMtrLength2->set_digits(0);
+ m_xMtrDistance->set_digits(0);
+
+ m_xMtrLength1->set_unit(FieldUnit::PERCENT);
+ m_xMtrLength2->set_unit(FieldUnit::PERCENT);
+ m_xMtrDistance->set_unit(FieldUnit::PERCENT);
+
+ // tdf#126736 800%
+ m_xMtrLength1->set_range(0, 800, FieldUnit::PERCENT);
+ m_xMtrLength2->set_range(0, 800, FieldUnit::PERCENT);
+ m_xMtrDistance->set_range(0, 800, FieldUnit::PERCENT);
+
+ m_xMtrLength1->set_value(nTmp1, FieldUnit::PERCENT);
+ m_xMtrLength2->set_value(nTmp2, FieldUnit::PERCENT);
+ m_xMtrDistance->set_value(nTmp3, FieldUnit::PERCENT);
+ }
+ SelectTypeHdl_Impl( nullptr );
+}
+
+IMPL_LINK( SvxLineDefTabPage, SelectTypeListBoxHdl_Impl, weld::ComboBox&, rListBox, void )
+{
+ SelectTypeHdl_Impl(&rListBox);
+}
+
+void SvxLineDefTabPage::SelectTypeHdl_Impl(const weld::ComboBox* p)
+{
+ if (p == m_xLbType1.get() || !p)
+ {
+ if (m_xLbType1->get_active() == 0)
+ {
+ m_xMtrLength1->set_sensitive(false);
+ m_xMtrLength1->set_text("");
+ }
+ else if (!m_xMtrLength1->get_sensitive())
+ {
+ m_xMtrLength1->set_sensitive(true);
+ m_xMtrLength1->reformat();
+ }
+ }
+
+ if (p == m_xLbType2.get() || !p)
+ {
+ if (m_xLbType2->get_active() == 0)
+ {
+ m_xMtrLength2->set_sensitive(false);
+ m_xMtrLength2->set_text("");
+ }
+ else if (!m_xMtrLength2->get_sensitive())
+ {
+ m_xMtrLength2->set_sensitive(true);
+ m_xMtrLength2->reformat();
+ }
+ }
+ ChangePreviewHdl_Impl(*m_xMtrLength1);
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ClickAddHdl_Impl, weld::Button&, void)
+{
+ OUString aNewName(SvxResId(RID_SVXSTR_LINESTYLE));
+ OUString aDesc(CuiResId(RID_CUISTR_DESC_LINESTYLE));
+ OUString aName;
+
+ tools::Long nCount = pDashList->Count();
+ tools::Long j = 1;
+ bool bDifferent = false;
+
+ while ( !bDifferent )
+ {
+ aName = aNewName + " " + OUString::number( j++ );
+ bDifferent = true;
+
+ for ( tools::Long i = 0; i < nCount && bDifferent; i++ )
+ if ( aName == pDashList->GetDash( i )->GetName() )
+ bDifferent = false;
+ }
+
+ SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
+ ScopedVclPtr<AbstractSvxNameDialog> pDlg(pFact->CreateSvxNameDialog(GetFrameWeld(), aName, aDesc));
+ bool bLoop = true;
+
+ while ( bLoop && pDlg->Execute() == RET_OK )
+ {
+ pDlg->GetName( aName );
+ bDifferent = true;
+
+ for( tools::Long i = 0; i < nCount && bDifferent; i++ )
+ {
+ if( aName == pDashList->GetDash( i )->GetName() )
+ bDifferent = false;
+ }
+
+ if( bDifferent )
+ {
+ bLoop = false;
+ FillDash_Impl();
+
+ tools::Long nDashCount = pDashList->Count();
+ pDashList->Insert( std::make_unique<XDashEntry>(aDash, aName), nDashCount );
+ m_xLbLineStyles->Append( *pDashList->GetDash(nDashCount), pDashList->GetUiBitmap(nDashCount) );
+
+ m_xLbLineStyles->set_active(m_xLbLineStyles->get_count() - 1);
+
+ *pnDashListState |= ChangeType::MODIFIED;
+
+ *pPageType = PageType::Hatch;
+
+ // save values for changes recognition (-> method)
+ m_xNumFldNumber1->save_value();
+ m_xMtrLength1->save_value();
+ m_xLbType1->save_value();
+ m_xNumFldNumber2->save_value();
+ m_xMtrLength2->save_value();
+ m_xLbType2->save_value();
+ m_xMtrDistance->save_value();
+ }
+ else
+ {
+ std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/queryduplicatedialog.ui"));
+ std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("DuplicateNameDialog"));
+ xBox->run();
+ }
+ }
+ pDlg.disposeAndClear();
+
+ // determine button state
+ if ( pDashList->Count() )
+ {
+ m_xBtnModify->set_sensitive(true);
+ m_xBtnDelete->set_sensitive(true);
+ m_xBtnSave->set_sensitive(true);
+ }
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ClickModifyHdl_Impl, weld::Button&, void)
+{
+ int nPos = m_xLbLineStyles->get_active();
+ if (nPos == -1)
+ return;
+
+ OUString aDesc(CuiResId(RID_CUISTR_DESC_LINESTYLE));
+ OUString aName( pDashList->GetDash( nPos )->GetName() );
+ OUString aOldName = aName;
+
+ SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
+ ScopedVclPtr<AbstractSvxNameDialog> pDlg(pFact->CreateSvxNameDialog(GetFrameWeld(), aName, aDesc));
+
+ tools::Long nCount = pDashList->Count();
+ bool bLoop = true;
+
+ while ( bLoop && pDlg->Execute() == RET_OK )
+ {
+ pDlg->GetName( aName );
+ bool bDifferent = true;
+
+ for( tools::Long i = 0; i < nCount && bDifferent; i++ )
+ {
+ if( aName == pDashList->GetDash( i )->GetName() &&
+ aName != aOldName )
+ bDifferent = false;
+ }
+
+ if ( bDifferent )
+ {
+ bLoop = false;
+ FillDash_Impl();
+
+ pDashList->Replace(std::make_unique<XDashEntry>(aDash, aName), nPos);
+ m_xLbLineStyles->Modify(*pDashList->GetDash(nPos), nPos, pDashList->GetUiBitmap(nPos));
+
+ m_xLbLineStyles->set_active(nPos);
+
+ *pnDashListState |= ChangeType::MODIFIED;
+
+ *pPageType = PageType::Hatch;
+
+ // save values for changes recognition (-> method)
+ m_xNumFldNumber1->save_value();
+ m_xMtrLength1->save_value();
+ m_xLbType1->save_value();
+ m_xNumFldNumber2->save_value();
+ m_xMtrLength2->save_value();
+ m_xLbType2->save_value();
+ m_xMtrDistance->save_value();
+ }
+ else
+ {
+ std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/queryduplicatedialog.ui"));
+ std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("DuplicateNameDialog"));
+ xBox->run();
+ }
+ }
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ClickDeleteHdl_Impl, weld::Button&, void)
+{
+ int nPos = m_xLbLineStyles->get_active();
+ if (nPos != -1)
+ {
+ std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/querydeletelinestyledialog.ui"));
+ std::unique_ptr<weld::MessageDialog> xQueryBox(xBuilder->weld_message_dialog("AskDelLineStyleDialog"));
+ if (xQueryBox->run() == RET_YES)
+ {
+ pDashList->Remove(nPos);
+ m_xLbLineStyles->remove(nPos);
+ m_xLbLineStyles->set_active(0);
+
+ SelectLinestyleHdl_Impl( nullptr );
+ *pPageType = PageType::Area; // style should not be taken
+
+ *pnDashListState |= ChangeType::MODIFIED;
+
+ ChangePreviewHdl_Impl( *m_xMtrLength1 );
+ }
+ }
+
+ // determine button state
+ if ( !pDashList->Count() )
+ {
+ m_xBtnModify->set_sensitive(false);
+ m_xBtnDelete->set_sensitive(false);
+ m_xBtnSave->set_sensitive(false);
+ }
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ClickLoadHdl_Impl, weld::Button&, void)
+{
+ sal_uInt16 nReturn = RET_YES;
+
+ if ( *pnDashListState & ChangeType::MODIFIED )
+ {
+ std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/querysavelistdialog.ui"));
+ std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("AskSaveList"));
+
+ nReturn = xBox->run();
+
+ if ( nReturn == RET_YES )
+ pDashList->Save();
+ }
+
+ if ( nReturn != RET_CANCEL )
+ {
+ ::sfx2::FileDialogHelper aDlg(css::ui::dialogs::TemplateDescription::FILEOPEN_SIMPLE,
+ FileDialogFlags::NONE, GetFrameWeld());
+ OUString aStrFilterType( "*.sod" );
+ aDlg.AddFilter( aStrFilterType, aStrFilterType );
+ OUString aPalettePath(SvtPathOptions().GetPalettePath());
+ OUString aLastDir;
+ sal_Int32 nIndex = 0;
+ do
+ {
+ aLastDir = aPalettePath.getToken(0, ';', nIndex);
+ }
+ while (nIndex >= 0);
+
+ INetURLObject aFile(aLastDir);
+ aDlg.SetDisplayDirectory( aFile.GetMainURL( INetURLObject::DecodeMechanism::NONE ) );
+
+ if( aDlg.Execute() == ERRCODE_NONE )
+ {
+ INetURLObject aURL( aDlg.GetPath() );
+ INetURLObject aPathURL( aURL );
+
+ aPathURL.removeSegment();
+ aPathURL.removeFinalSlash();
+
+ XDashListRef pDshLst = XPropertyList::AsDashList(XPropertyList::CreatePropertyList( XPropertyListType::Dash, aPathURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), "" ));
+ pDshLst->SetName( aURL.getName() );
+
+ if( pDshLst->Load() )
+ {
+ pDashList = pDshLst;
+ static_cast<SvxLineTabDialog*>(GetDialogController())->SetNewDashList( pDashList );
+
+ m_xLbLineStyles->clear();
+ m_xLbLineStyles->Fill( pDashList );
+ Reset( &rOutAttrs );
+
+ pDashList->SetName( aURL.getName() );
+
+ *pnDashListState |= ChangeType::CHANGED;
+ *pnDashListState &= ~ChangeType::MODIFIED;
+ }
+ else
+ {
+ std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/querynoloadedfiledialog.ui"));
+ std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("NoLoadedFileDialog"));
+ xBox->run();
+ }
+ }
+ }
+
+ // determine button state
+ if ( pDashList->Count() )
+ {
+ m_xBtnModify->set_sensitive(true);
+ m_xBtnDelete->set_sensitive(true);
+ m_xBtnSave->set_sensitive(true);
+ }
+ else
+ {
+ m_xBtnModify->set_sensitive(false);
+ m_xBtnDelete->set_sensitive(false);
+ m_xBtnSave->set_sensitive(false);
+ }
+}
+
+IMPL_LINK_NOARG(SvxLineDefTabPage, ClickSaveHdl_Impl, weld::Button&, void)
+{
+ ::sfx2::FileDialogHelper aDlg(css::ui::dialogs::TemplateDescription::FILESAVE_SIMPLE, FileDialogFlags::NONE, GetFrameWeld());
+ OUString aStrFilterType( "*.sod" );
+ aDlg.AddFilter( aStrFilterType, aStrFilterType );
+
+ OUString aPalettePath(SvtPathOptions().GetPalettePath());
+ OUString aLastDir;
+ sal_Int32 nIndex = 0;
+ do
+ {
+ aLastDir = aPalettePath.getToken(0, ';', nIndex);
+ }
+ while (nIndex >= 0);
+
+ INetURLObject aFile(aLastDir);
+ DBG_ASSERT( aFile.GetProtocol() != INetProtocol::NotValid, "invalid URL" );
+
+ if( !pDashList->GetName().isEmpty() )
+ {
+ aFile.Append( pDashList->GetName() );
+
+ if( aFile.getExtension().isEmpty() )
+ aFile.SetExtension( u"sod" );
+ }
+
+ aDlg.SetDisplayDirectory( aFile.GetMainURL( INetURLObject::DecodeMechanism::NONE ) );
+ if ( aDlg.Execute() != ERRCODE_NONE )
+ return;
+
+ INetURLObject aURL( aDlg.GetPath() );
+ INetURLObject aPathURL( aURL );
+
+ aPathURL.removeSegment();
+ aPathURL.removeFinalSlash();
+
+ pDashList->SetName( aURL.getName() );
+ pDashList->SetPath( aPathURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ) );
+
+ if( pDashList->Save() )
+ {
+ *pnDashListState &= ~ChangeType::MODIFIED;
+ }
+ else
+ {
+ std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(GetFrameWeld(), "cui/ui/querynosavefiledialog.ui"));
+ std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("NoSaveFileDialog"));
+ xBox->run();
+ }
+}
+
+void SvxLineDefTabPage::FillDash_Impl()
+{
+ css::drawing::DashStyle eXDS;
+
+ if (m_xCbxSynchronize->get_active())
+ eXDS = css::drawing::DashStyle_RECTRELATIVE;
+ else
+ eXDS = css::drawing::DashStyle_RECT;
+
+ aDash.SetDashStyle( eXDS );
+ aDash.SetDots( static_cast<sal_uInt8>(m_xNumFldNumber1->get_value()) );
+ aDash.SetDotLen( m_xLbType1->get_active() == 0 ? 0 : GetCoreValue( *m_xMtrLength1, ePoolUnit ) );
+ aDash.SetDashes( static_cast<sal_uInt8>(m_xNumFldNumber2->get_value()) );
+ aDash.SetDashLen( m_xLbType2->get_active() == 0 ? 0 : GetCoreValue( *m_xMtrLength2, ePoolUnit ) );
+ aDash.SetDistance( GetCoreValue( *m_xMtrDistance, ePoolUnit ) );
+
+ rXLSet.Put( XLineDashItem( OUString(), aDash ) );
+
+ // #i34740#
+ m_aCtlPreview.SetLineAttributes(aXLineAttr.GetItemSet());
+}
+
+void SvxLineDefTabPage::FillDialog_Impl()
+{
+ css::drawing::DashStyle eXDS = aDash.GetDashStyle(); // css::drawing::DashStyle_RECT, css::drawing::DashStyle_ROUND
+ if( eXDS == css::drawing::DashStyle_RECTRELATIVE )
+ m_xCbxSynchronize->set_active(true);
+ else
+ m_xCbxSynchronize->set_active(false);
+
+ m_xNumFldNumber1->set_value(aDash.GetDots());
+ SetMetricValue( *m_xMtrLength1, aDash.GetDotLen(), ePoolUnit );
+ m_xLbType1->set_active(aDash.GetDotLen() == 0 ? 0 : 1);
+ m_xNumFldNumber2->set_value(aDash.GetDashes());
+ SetMetricValue( *m_xMtrLength2, aDash.GetDashLen(), ePoolUnit );
+ m_xLbType2->set_active(aDash.GetDashLen() == 0 ? 0 : 1);
+ SetMetricValue( *m_xMtrDistance, aDash.GetDistance(), ePoolUnit );
+
+ ChangeMetricHdl_Impl(nullptr);
+
+ // save values for changes recognition (-> method)
+ m_xNumFldNumber1->save_value();
+ m_xMtrLength1->save_value();
+ m_xLbType1->save_value();
+ m_xNumFldNumber2->save_value();
+ m_xMtrLength2->save_value();
+ m_xLbType2->save_value();
+ m_xMtrDistance->save_value();
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */