diff options
Diffstat (limited to 'oox/qa/unit/vml.cxx')
| -rw-r--r-- | oox/qa/unit/vml.cxx | 247 |
1 files changed, 247 insertions, 0 deletions
diff --git a/oox/qa/unit/vml.cxx b/oox/qa/unit/vml.cxx new file mode 100644 index 0000000000..c0918b2682 --- /dev/null +++ b/oox/qa/unit/vml.cxx @@ -0,0 +1,247 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + */ + +#include <sal/config.h> + +#include <test/unoapi_test.hxx> + +#include <com/sun/star/beans/XPropertySet.hpp> +#include <com/sun/star/drawing/LineStyle.hpp> +#include <com/sun/star/drawing/PointSequence.hpp> +#include <com/sun/star/drawing/PointSequenceSequence.hpp> +#include <com/sun/star/drawing/PolygonKind.hpp> +#include <com/sun/star/drawing/PolyPolygonBezierCoords.hpp> +#include <com/sun/star/drawing/XDrawPageSupplier.hpp> +#include <com/sun/star/drawing/XDrawPagesSupplier.hpp> +#include <com/sun/star/lang/XServiceInfo.hpp> +#include <com/sun/star/drawing/ColorMode.hpp> + +using namespace ::com::sun::star; + +/// oox vml tests. +class OoxVmlTest : public UnoApiTest +{ +public: + OoxVmlTest() + : UnoApiTest("/oox/qa/unit/data/") + { + } +}; + +CPPUNIT_TEST_FIXTURE(OoxVmlTest, tdf112450_vml_polyline) +{ + // Load a document with v:polyline shapes. Error was, that the size was set to zero and the + // points were zero because of missing decode from length with unit. + loadFromFile(u"tdf112450_vml_polyline.docx"); + uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY); + uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0), + uno::UNO_QUERY); + { + // This tests a polyline shape which is not closed. + uno::Reference<drawing::XShape> xShape(xDrawPage->getByIndex(0), uno::UNO_QUERY); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + // Without fix in place, Geometry had 2 points, both 0|0. + drawing::PointSequenceSequence aGeometry; + xShapeProps->getPropertyValue("Geometry") >>= aGeometry; + drawing::PointSequence aPolygon = aGeometry[0]; + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(6879), aPolygon[3].X, 1); + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(487), aPolygon[3].Y, 1); + // Without fix in place, width and height were zero + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(6879), xShape->getSize().Width, 1); + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(1926), xShape->getSize().Height, 1); + // After the fix the shape has still to be PolygonKind_PLIN + drawing::PolygonKind ePolygonKind; + xShapeProps->getPropertyValue("PolygonKind") >>= ePolygonKind; + CPPUNIT_ASSERT_EQUAL(drawing::PolygonKind_PLIN, ePolygonKind); + } + { + uno::Reference<drawing::XShape> xShape(xDrawPage->getByIndex(1), uno::UNO_QUERY); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + // Without fix in place, Geometry had 2 points, both 0|0. + drawing::PointSequenceSequence aGeometry; + xShapeProps->getPropertyValue("Geometry") >>= aGeometry; + drawing::PointSequence aPolygon = aGeometry[0]; + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(5062), aPolygon[2].X, 1); + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(2247), aPolygon[2].Y, 1); + // Without fix in place, width and height were zero + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(6163), xShape->getSize().Width, 1); + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(2247), xShape->getSize().Height, 1); + // Without fix in place the shape was not closed, it had PolygonKind_PLIN + drawing::PolygonKind ePolygonKind; + xShapeProps->getPropertyValue("PolygonKind") >>= ePolygonKind; + CPPUNIT_ASSERT_EQUAL(drawing::PolygonKind_POLY, ePolygonKind); + } + { + // This tests a filled shape where v:polyline does not have attribute coordsize + uno::Reference<drawing::XShape> xShape(xDrawPage->getByIndex(2), uno::UNO_QUERY); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + // Without fix in place, Geometry had 2 points, both 0|0. + drawing::PointSequenceSequence aGeometry; + xShapeProps->getPropertyValue("Geometry") >>= aGeometry; + drawing::PointSequence aPolygon = aGeometry[0]; + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(2095), aPolygon[3].X, 1); + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(608), aPolygon[3].Y, 1); + // Without fix in place, width and height were zero + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(5634), xShape->getSize().Width, 1); + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(2485), xShape->getSize().Height, 1); + // Without fix in place the shape was not closed, it had PolygonKind_PLIN + drawing::PolygonKind ePolygonKind; + xShapeProps->getPropertyValue("PolygonKind") >>= ePolygonKind; + CPPUNIT_ASSERT_EQUAL(drawing::PolygonKind_POLY, ePolygonKind); + } +} + +CPPUNIT_TEST_FIXTURE(OoxVmlTest, tdf137314_vml_rotation_unit_fd) +{ + // Load a document with a 30deg rotated arc on a drawing canvas. Rotation is given + // as 1966080fd. Error was, that the vml angle unit "fd" was not converted to Degree100. + loadFromFile(u"tdf137314_vml_rotation_unit_fd.docx"); + uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY); + uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0), + uno::UNO_QUERY); + uno::Reference<container::XIndexAccess> xGroup(xDrawPage->getByIndex(0), uno::UNO_QUERY); + uno::Reference<drawing::XShape> xShape(xGroup->getByIndex(1), uno::UNO_QUERY); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + drawing::PolyPolygonBezierCoords aPolyPolygonBezierCoords; + xShapeProps->getPropertyValue("PolyPolygonBezier") >>= aPolyPolygonBezierCoords; + drawing::PointSequence aPolygon = aPolyPolygonBezierCoords.Coordinates[1]; + // Without fix in place, the vector was -1441|1490. + // [1] and [2] are Bezier-curve control points. + sal_Int32 nDiffX = aPolygon[3].X - aPolygon[0].X; + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(1490), nDiffX, 1); + sal_Int32 nDiffY = aPolygon[3].Y - aPolygon[0].Y; + CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(1441), nDiffY, 1); +} + +CPPUNIT_TEST_FIXTURE(OoxVmlTest, testSpt202ShapeType) +{ + // Load a document with a groupshape, 2nd child is a <v:shape>, its type has o:spt set to 202 + // (TextBox). + loadFromFile(u"group-spt202.docx"); + uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY); + uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0), + uno::UNO_QUERY); + uno::Reference<container::XIndexAccess> xGroup(xDrawPage->getByIndex(0), uno::UNO_QUERY); + uno::Reference<drawing::XShape> xShape(xGroup->getByIndex(1), uno::UNO_QUERY); + + // Without the accompanying fix in place, this test would have failed with: + // - Expected: com.sun.star.drawing.TextShape + // - Actual : com.sun.star.drawing.CustomShape + // and then the size of the group shape was incorrect, e.g. its right edge was outside the page + // boundaries. + CPPUNIT_ASSERT_EQUAL(OUString("com.sun.star.drawing.TextShape"), xShape->getShapeType()); +} + +CPPUNIT_TEST_FIXTURE(OoxVmlTest, testShapeNonAutosizeWithText) +{ + // Load a document which has a group shape, containing a single child. + // 17.78 cm is the full group shape width, 19431/64008 is the child shape's relative width inside + // that, so 5.3975 cm should be the shape width. + loadFromFile(u"shape-non-autosize-with-text.docx"); + uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY); + uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0), + uno::UNO_QUERY); + uno::Reference<container::XIndexAccess> xGroup(xDrawPage->getByIndex(0), uno::UNO_QUERY); + uno::Reference<drawing::XShape> xShape(xGroup->getByIndex(0), uno::UNO_QUERY); + // Without the accompanying fix in place, this test would have failed with: + // - Actual : 1115 + // - Expected: 5398 + // because the width was determined using its text size, not using the explicit size. + CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(5398), xShape->getSize().Width); +} + +CPPUNIT_TEST_FIXTURE(OoxVmlTest, testGraphicStroke) +{ + loadFromFile(u"graphic-stroke.pptx"); + uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY); + uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0), + uno::UNO_QUERY); + + CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xDrawPage->getCount()); + + uno::Reference<beans::XPropertySet> xShape; + uno::Reference<lang::XServiceInfo> xInfo(xDrawPage->getByIndex(0), uno::UNO_QUERY); + if (xInfo->supportsService("com.sun.star.drawing.OLE2Shape")) + xShape.set(xInfo, uno::UNO_QUERY); + + CPPUNIT_ASSERT(xShape.is()); + + drawing::LineStyle eLineStyle{}; + xShape->getPropertyValue("LineStyle") >>= eLineStyle; + // Without the accompanying fix in place, this test would have failed with: + // - Expected: 1 + // - Actual : 0 + // i.e. line style was NONE, not SOLID. + CPPUNIT_ASSERT_EQUAL(drawing::LineStyle_SOLID, eLineStyle); +} + +CPPUNIT_TEST_FIXTURE(OoxVmlTest, testWatermark) +{ + // Given a document with a picture watermark, and the "washout" checkbox is ticked on the Word + // UI: + // When loading that document: + loadFromFile(u"watermark.docx"); + + // Then make sure the watermark effect is not lost on import: + uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY); + uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0), + uno::UNO_QUERY); + uno::Reference<beans::XPropertySet> xShape(xDrawPage->getByIndex(0), uno::UNO_QUERY); + drawing::ColorMode eMode{}; + xShape->getPropertyValue("GraphicColorMode") >>= eMode; + // Without the accompanying fix in place, this test would have failed with: + // - Expected: 3 + // - Actual : 0 + // i.e. the color mode was STANDARD, not WATERMARK. + CPPUNIT_ASSERT_EQUAL(drawing::ColorMode_WATERMARK, eMode); +} + +CPPUNIT_TEST_FIXTURE(OoxVmlTest, testWriterFontworkTrimTrue) +{ + // The document contains a shape, that will be exported as VML shape to docx. Error was that the + // attribute trim was not written out and thus import had treated it as the default 'false' and + // had reduced the shape height. + loadFromFile(u"tdf153260_VML_trim_export.odt"); + + // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 + // Attribute 'ID' is not allowed to appear in element 'v:shape'. + skipValidation(); + saveAndReload("Office Open XML Text"); + + uno::Reference<drawing::XDrawPageSupplier> xDrawPageSupplier(mxComponent, uno::UNO_QUERY); + uno::Reference<drawing::XShape> xShape(xDrawPageSupplier->getDrawPage()->getByIndex(0), + uno::UNO_QUERY); + + // Make sure the shape height is not changed. + // Without the fix the test would have failed with expected 4999 actual 1732. + awt::Size aSize = xShape->getSize(); + CPPUNIT_ASSERT_DOUBLES_EQUAL(4999, aSize.Height, 2); +} + +CPPUNIT_TEST_FIXTURE(OoxVmlTest, testVMLDetectWordArtOnImport) +{ + // The document contains a WordArt shape with type other than "fontwork-foo". Error was that + // WordArt was not detected and thus shrinking shape to text content was not prevented. + loadFromFile(u"tdf153258_VML_import_WordArt_detection.docx"); + + uno::Reference<drawing::XDrawPageSupplier> xDrawPageSupplier(mxComponent, uno::UNO_QUERY); + uno::Reference<drawing::XShape> xShape(xDrawPageSupplier->getDrawPage()->getByIndex(0), + uno::UNO_QUERY); + + // Make sure the shape width and height is not changed. + awt::Size aSize = xShape->getSize(); + // Without the fix the test would have failed with expected 7514 actual 1453. + CPPUNIT_ASSERT_DOUBLES_EQUAL(7514, aSize.Width, 2); + // Without the fix the test would have failed with expected 4540 actual 309. + CPPUNIT_ASSERT_DOUBLES_EQUAL(4540, aSize.Height, 2); +} + +CPPUNIT_PLUGIN_IMPLEMENT(); + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |