diff options
Diffstat (limited to 'oox/source/dump/dumperbase.ini')
| -rw-r--r-- | oox/source/dump/dumperbase.ini | 412 |
1 files changed, 412 insertions, 0 deletions
diff --git a/oox/source/dump/dumperbase.ini b/oox/source/dump/dumperbase.ini new file mode 100644 index 0000000000..efb42651f2 --- /dev/null +++ b/oox/source/dump/dumperbase.ini @@ -0,0 +1,412 @@ +# +# This file is part of the LibreOffice project. +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. +# +# This file incorporates work covered by the following license notice: +# +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed +# with this work for additional information regarding copyright +# ownership. The ASF licenses this file to you under the Apache +# License, Version 2.0 (the "License"); you may not use this file +# except in compliance with the License. You may obtain a copy of +# the License at http://www.apache.org/licenses/LICENSE-2.0 . +# + +# dumper settings ============================================================ +# +# Basic concepts +# +# - Character encoding of dumper ini files is UTF-8. +# - Whitespace characters are generally stripped, e.g. at start and end of +# lines, before/after equal signs, commas, etc. +# - Comments start with the hash (#) or semicolon (;) character. Leading +# whitespace characters are ignored. +# +# ---------------------------------------------------------------------------- + +# Enable entire dumper (default=off). This option does not affect the option +# 'enable-import'. +# 0=off, 1=on +enable-dumper=1 + +# Enable import after dumping (default=on). Disabling this option allows +# to dump a file without loading it. This option is independent from the +# 'enable-dumper' option. +# 0=off, 1=on +enable-import=1 + +# Maximum size of binary stream dumps (default=infinite). +max-binary-stream-size=65536 + +# Maximum size of binary data blocks in content dumps (default=infinite). +max-binary-data-size=128 + +# Shows unknown trailing data as binary dump (default=on). +# 0=off, 1=on +show-trailing-unknown=1 + +# Shows the absolute stream position of records in the record header field +# (default=on). +# 0=off, 1=on +show-record-position=0 + +# name lists ================================================================= +# +# Syntax descriptions +# +# - Optional items are enclosed in brackets []. +# - Optional items that may be repeated are marked with an ellipsis (...). +# - Items in a set to choose from are separated by vertical lines (|). +# - <LISTNAME> denotes the name of a list. List names may consist of any non- +# whitespace characters. +# - <value>, <firstvalue>, <bitfield>, <bitmask> etc. denote integer values. +# Decimal and hexadecimal notation is supported, using C/C++ notation. +# - <bool> denotes a boolean value. Possible values are 0|1|false|true. +# - <constname> denotes a literal name for a constant or bit. +# +# ---------------------------------------------------------------------------- +# +# constlist +# +# Defines names for a list of specific values. +# +# Syntax: +# +# constlist = <LISTNAME> +# default = <constname> +# include = <LISTNAME>[,<LISTNAME>...] +# exclude = <value>[,<value>...] +# quote-names = <bool> +# <value> = <constname> +# end +# +# - default (optional): Declares <constname> as a default name for values not +# specified in the name list. <constname> may be the empty string. If not +# set, the literal string '?err:no-name' (unquoted) is the default name. +# - include (optional): Includes the specified name list(s) into the own list. +# - exclude (optional): Removes values from the name lists, useful e.g. after +# a name list has been included. +# - quote-names (optional): Specifies whether to return the contained names +# enclosed in single quote (') characters. Default is false. +# +# The order of the declarations is important, later declarations may overwrite +# names generated from earlier declarations. +# +# Example: +# +# constlist = EXAMPLE-CONSTLIST +# 1 = my-value +# include = OTHER-LIST +# exclude = 2,3 +# 0x0004 = other-value +# end +# +# - Defines the name 'my-value' for the constant 1. +# - Includes 'OTHER-LIST' which may overwrite the name of the constant 1. +# - Excludes the names of constants 2 and 3, which may have been included from +# the name list 'OTHER-LIST'. +# - Defines the name 'other-value' for the constant 4, which may overwrite the +# name of this constant included from the name list 'OTHER-LIST'. +# +# ---------------------------------------------------------------------------- +# +# multilist +# +# Defines names for contiguous ranges of values. +# +# Syntax: +# +# multilist = <LISTNAME> +# default = <constname> +# include = <LISTNAME>[,<LISTNAME>...] +# exclude = <value>[,<value>...] +# ignore-empty = <bool> +# <firstvalue> = <constname>[,<constname>...] +# end +# +# - default (optional): See constlist above. +# - include (optional): See constlist above. +# - exclude (optional): See constlist above. +# - ignore-empty (optional): Specifies whether to skip empty names in a list. +# - True = skips an empty entry, the default name will be generated. +# - False = creates an empty string for the entry. +# Default is true (skip empty entries). +# +# Examples: +# +# multilist = EXAMPLE-MULTILIST +# 0 = value0,value1,,value3 +# 8 = value8 +# end +# +# - Defines the names 'value0' for the constant 0, 'value1' for the constant +# 1, 'value3' for the constant 3, and 'value8' for the constant 8. +# +# multilist = EXAMPLE-MULTILIST-2 +# include = EXAMPLE-MULTILIST +# ignore-empty = false +# default = other +# end +# +# - Same as example above (includes EXAMPLE-MULTILIST), but defines the empty +# string for the constant 2. Other constants (less than 0 or greater than 3 +# and not equal to 8) get the default name 'other'. +# +# ---------------------------------------------------------------------------- +# +# shortlist +# +# Defines names for a contiguous range of values. The entire list definition +# is given in a single text line. +# +# Syntax: +# +# shortlist = <LISTNAME>,<firstvalue>,<constname>[,<constname>...] +# +# Uses default settings of the multi-list (i.e. skips empty entries). +# +# ---------------------------------------------------------------------------- +# +# flagslist +# +# Defines names for single bits in a bit field. +# +# Syntax: +# +# flagslist = <LISTNAME> +# include = <LISTNAME>[,<LISTNAME>...] +# exclude = <bitfield>[,<bitfield>...] +# ignore = <bitfield> +# <bitmask> = <cname> | !<cname> | :<cname> | !<cname0>!<cname1> +# end +# +# - include (optional): See constlist above. +# - exclude (optional): See constlist above. +# - ignore (optional): Specifies bits to be ignored. Bits without an explicit +# name and not set in this declaration will be shown as unknown. Default is +# to not ignore a bit. +# - <bitmask>: The bit to be named. Must be a value with a single bit set. +# - <cname> - Sets a name for the bit that will be shown if the bit is set. +# Does not show anything if the bit is cleared. +# - !<cname> - Sets a name for the bit that will be shown if the bit is +# cleared. Does not show anything if the bit is set. +# - :<cname> - Sets a name for the bit that will always be shown together +# with the actual state of the bit, appended as ':on' or ':off'. +# - !<cname0>!<cname1> - Sets a name for both the cleared bit (cname0), and +# for the set bit (cname1). +# +# ---------------------------------------------------------------------------- +# +# combilist +# +# Defines names for single bits and for embedded values in a bit field. This +# is an extension of the flagslist described above. +# +# Syntax: +# +# combilist = <LISTNAME> +# include = <LISTNAME>[,<LISTNAME>...] +# exclude = <bitmask>[,<bitmask>...] +# ignore = <bitfield> +# <bitmask> = <cname> | !<cname> | :<cname> | !<cname0>!<cname1> +# <bitfield> = <datatype>,<dataformat>,<bitfieldname>[,<LISTNAME>[,options...]] +# end +# +# - include (optional): See constlist above. +# - exclude (optional): See constlist above. +# - ignore (optional): See flagslist above. +# - <bitmask>: See flagslist above. +# - <bitfield>: The mask of the embedded bitfield. Must be a value with +# exactly one sequence of at least 2 consecutive bits. +# - <datatype>: [u]int8 | [u]int16 | [u]int32 | [u]int64 | float | double +# - <dataformat>: dec | hex | shorthex | bin | fix | bool +# - <bitfieldname>: The name of the embedded bitfield. +# - <LISTAME>: Optional name list with names for the values of the embedded +# bitfield. +# - options: Additional options for this bitfield: +# - filter = <filterbitfield>~<filtervalue>: If set, the entire bitfield +# will only be written, if the complete data item currently dumped +# contains exactly the value specified in <filtervalue> in the bitfield +# specified in <filterbitfield>. Otherwise, nothing is written. It is +# possible to specify multiple filter rules for this bitfield. In that +# case, the bitfield will be written, if at least one filter rule +# applies for the current data item. +# - noshift = <bool>: If set to 'true', the extracted value will be +# shifted to the right (normalized). If set to 'false', the value will +# be written unshifted. Default is 'true'. +# +# ---------------------------------------------------------------------------- +# +# unitconverter +# +# Converts values and appends a unit name. +# +# Syntax: +# +# unitconverter = <LISTNAME>,[/]<factor>[,<unitname>] +# +# ---------------------------------------------------------------------------- + +unitconverter=CONV-DEC,1 +unitconverter=CONV-PERCENT,1,% +unitconverter=CONV-FLOAT-TO-PERC,100,% +unitconverter=CONV-DEG,1,° +unitconverter=CONV-HMM-TO-CM,/1000,cm +unitconverter=CONV-INCH-TO-CM,2.54,cm +unitconverter=CONV-PT-TO-CM,/28.346457,cm +unitconverter=CONV-PT1616-TO-CM,/1857713.4,cm +unitconverter=CONV-TWIP-TO-CM,/566.92913,cm +unitconverter=CONV-TWIP-TO-PT,/20,pt +unitconverter=CONV-EMU-TO-CM,/36000,cm + +constlist=BOOLEAN + 0=FALSE + default=TRUE +end + +combilist=RK-FLAGS + 0x00000001=div-100 + 0x00000002=integer + 0xFFFFFFFC=int32,hex,value +end + +constlist=CHARSET + 0=win-1252-latin-1 + 1=system-default + 2=symbol + 77=apple-roman + 128=win-932-japanese-shift-jis + 129=win-949-korean-hangul + 130=win-1361-korean-johab + 134=win-936-chinese-simplified-gbk + 136=win-950-chinese-traditional-big5 + 161=win-1253-greek + 162=win-1254-turkish + 163=win-1258-vietnamese + 177=win-1255-hebrew + 178=win-1256-arabic + 186=win-1257-baltic + 204=win-1251-cyrillic + 222=win-874-thai + 238=win-1250-latin-2-central-european + 255=ibm-850-latin-1 +end + +combilist=FONT-PITCHFAMILY + 0x0F=uint8,dec,pitch,FONT-PITCH + 0xF0=uint8,dec,family,FONT-FAMILY +end + +constlist=FONT-WEIGHT + 400=normal + 700=bold +end + +shortlist=FONT-PITCH,0,unknown,fixed,variable +shortlist=FONT-FAMILY,0,unknown,roman,swiss,modern,script,decorative + +constlist=CODEPAGES + 367=ascii + 437=ibm-437-us + 708=iso-8859-6 + 720=ibm-720-arabic + 737=ibm-737-greek + 775=ibm-775-baltic + 850=ibm-850-latin-1 + 852=ibm-852-latin-2-central-european + 855=ibm-855-cyrillic + 857=ibm-857-turkish + 858=ibm-858-multilingual-latin-1-with-euro + 860=ibm-860-portuguese + 861=ibm-861-icelandic + 862=ibm-862-hebrew + 863=ibm-863-canadian-french + 864=ibm-864-arabic + 865=ibm-865-nordic + 866=ibm-866-cyrillic-russian + 869=ibm-869-greek-modern + 874=win-874-thai + 932=win-932-japanese-shift-jis + 936=win-936-chinese-simplified-gbk + 949=win-949-korean-wansung + 950=win-950-chinese-traditional-big5 + 1200=utf-16 + 1250=win-1250-latin-2-central-european + 1251=win-1251-cyrillic + 1252=win-1252-latin-1 + 1253=win-1253-greek + 1254=win-1254-turkish + 1255=win-1255-hebrew + 1256=win-1256-arabic + 1257=win-1257-baltic + 1258=win-1258-vietnamese + 1361=win-1361-korean-johab + 10000=apple-roman + 10001=apple-japanese + 10002=apple-chinese-traditional + 10003=apple-korean + 10004=apple-arabic + 10005=apple-hebrew + 10006=apple-greek + 10007=apple-cyrillic + 10008=apple-chinese-simplified + 10010=apple-romanian + 10017=apple-ukrainian + 10029=apple-central-european-with-euro + 10079=apple-icelandic + 10081=apple-turkish + 10082=apple-croatian + 20127=ascii + 20866=koi8-r + 21866=koi8-u + 28591=iso-8859-1 + 28592=iso-8859-2 + 28593=iso-8859-3 + 28594=iso-8859-4 + 28595=iso-8859-5 + 28596=iso-8859-6 + 28597=iso-8859-7 + 28598=iso-8859-8 + 28599=iso-8859-9 + 28605=iso-8859-15 + 32768=apple-romanian + 32769=win-1252-latin-1 + 50220=iso-2022-jp + 50225=iso-2022-kr + 51932=euc-jp + 51936=euc-cn + 51949=euc-kr + 65000=utf-7 + 65001=utf-8 +end + +multilist=COUNTRY + 1=usa,canada,latin-america,,,,russia + 20=egypt + 30=greece,netherlands,belgium,france,spain,,hungary,,,italy + 40=,switzerland,,austria,uk,denmark,sweden,norway,poland,germany + 50=,,mexico,,,brazil + 60=,australia,,,new-zealand,,thailand + 80=,japan,korea,,vietnam,,china + 90=turkey + 210=,,,algeria,,,morocco,,libya + 350=,portugal,,,iceland,,,,finland + 420=czech + 880=,,,,,,taiwan + 960=,lebanon,jordan,syria,iraq,kuwait,saudi-arabia + 970=,uae,israel,,qatar + 980=,iran +end + +multilist=SYSTEMCOLOR + 0x00=scrollbar,desktop,active-title,inactive-title,menu,window-back,window-frame,menu-text + 0x08=window-text,active-title-text,active-border,inactive-border,app-workspace,highlight,highlight-text,button-face + 0x10=button-shadow,disabled-text,button-text,inactive-title-text,button-highlight,button-dark-shadow,button-light-shadow,tooltip-text + 0x18=tooltip-back,,hot-light,active-title-2,inactive-title-2,menu-highlight,menubar +end + +# ============================================================================ |