diff options
Diffstat (limited to 'sc/inc/refdata.hxx')
| -rw-r--r-- | sc/inc/refdata.hxx | 201 |
1 files changed, 201 insertions, 0 deletions
diff --git a/sc/inc/refdata.hxx b/sc/inc/refdata.hxx new file mode 100644 index 0000000000..d893248ba0 --- /dev/null +++ b/sc/inc/refdata.hxx @@ -0,0 +1,201 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#pragma once + +#include "address.hxx" +#include "scdllapi.h" +#include "calcmacros.hxx" + +struct ScSheetLimits; + +/// Single reference (one address) into the sheet +struct SC_DLLPUBLIC ScSingleRefData +{ +private: + SCCOL mnCol; + SCROW mnRow; + SCTAB mnTab; + + union + { + sal_uInt8 mnFlagValue; + struct + { + bool bColRel :1; + bool bColDeleted :1; + bool bRowRel :1; + bool bRowDeleted :1; + bool bTabRel :1; + bool bTabDeleted :1; + bool bFlag3D :1; ///< 3D-Ref + bool bRelName :1; ///< Reference derived from RangeName with relative values + } Flags; + }; + +public: + /// No default ctor, because used in ScRawToken union, set InitFlags! + void InitFlags() { mnFlagValue = 0; } ///< all FALSE + /// InitAddress: InitFlags and set address + void InitAddress( const ScAddress& rAdr ); + void InitAddress( SCCOL nCol, SCROW nRow, SCTAB nTab ); + /// InitAddressRel: InitFlags and set address, everything relative to rPos + void InitAddressRel( const ScDocument& rDoc, const ScAddress& rAdr, const ScAddress& rPos ); + /// InitFlags and set address, relative to rPos if rRef says so. + void InitFromRefAddress( const ScDocument& rDoc, const ScRefAddress& rRef, const ScAddress& rPos ); + sal_uInt8 FlagValue() const { return mnFlagValue;} + + void SetColRel( bool bVal ) { Flags.bColRel = bVal; } + bool IsColRel() const { return Flags.bColRel; } + void SetRowRel( bool bVal ) { Flags.bRowRel = bVal; } + bool IsRowRel() const { return Flags.bRowRel; } + void SetTabRel( bool bVal ) { Flags.bTabRel = bVal; } + bool IsTabRel() const { return Flags.bTabRel; } + + void SetAbsCol( SCCOL nVal ); + void SetRelCol( SCCOL nVal ); + void IncCol( SCCOL nInc ); + void SetAbsRow( SCROW nVal ); + void SetRelRow( SCROW nVal ); + void IncRow( SCROW nInc ); + void SetAbsTab( SCTAB nVal ); + void SetRelTab( SCTAB nVal ); + void IncTab( SCTAB nInc ); + + void SetColDeleted( bool bVal ); + bool IsColDeleted() const { return Flags.bColDeleted;} + void SetRowDeleted( bool bVal ); + bool IsRowDeleted() const { return Flags.bRowDeleted;} + void SetTabDeleted( bool bVal ); + bool IsTabDeleted() const { return Flags.bTabDeleted;} + bool IsDeleted() const; + + void SetFlag3D( bool bVal ) { Flags.bFlag3D = bVal; } + bool IsFlag3D() const { return Flags.bFlag3D; } + void SetRelName( bool bVal ) { Flags.bRelName = bVal; } + bool IsRelName() const { return Flags.bRelName; } + + bool Valid(const ScDocument& rDoc) const; + bool ColValid(const ScDocument& rDoc) const; + bool RowValid(const ScDocument& rDoc) const; + bool TabValid(const ScDocument& rDoc) const; + /** In external references nTab is -1 if the external document was not + loaded but the sheet was cached, or >=0 if the external document was + loaded. */ + bool ValidExternal(const ScDocument& rDoc) const; + + ScAddress toAbs( const ScSheetLimits& rLimits, const ScAddress& rPos ) const; + ScAddress toAbs( const ScDocument& rDoc, const ScAddress& rPos ) const; + void SetAddress( const ScSheetLimits& rLimits, const ScAddress& rAddr, const ScAddress& rPos ); + SCROW Row() const; + SCCOL Col() const; + SCTAB Tab() const; + + /** Adjust ordering (front-top-left/rear-bottom-right) to a new position. */ + static void PutInOrder( ScSingleRefData& rRef1, ScSingleRefData& rRef2, const ScAddress& rPos ); + + bool operator==( const ScSingleRefData& ) const; + bool operator!=( const ScSingleRefData& ) const; + +#if DEBUG_FORMULA_COMPILER + void Dump( int nIndent = 0 ) const; +#endif +}; + +/// Complex reference (a range) into the sheet +struct ScComplexRefData +{ + ScSingleRefData Ref1; + ScSingleRefData Ref2; + bool bTrimToData = false; + + void InitFlags() + { Ref1.InitFlags(); Ref2.InitFlags(); } + void InitRange( const ScRange& rRange ) + { + Ref1.InitAddress( rRange.aStart ); + Ref2.InitAddress( rRange.aEnd ); + } + void InitRangeRel( const ScDocument& rDoc, const ScRange& rRange, const ScAddress& rPos ) + { + Ref1.InitAddressRel( rDoc, rRange.aStart, rPos ); + Ref2.InitAddressRel( rDoc, rRange.aEnd, rPos ); + } + void InitRange( SCCOL nCol1, SCROW nRow1, SCTAB nTab1, + SCCOL nCol2, SCROW nRow2, SCTAB nTab2 ) + { + Ref1.InitAddress( nCol1, nRow1, nTab1 ); + Ref2.InitAddress( nCol2, nRow2, nTab2 ); + } + + /// InitFlags and set range, relative to rPos if rRef1 and rRef2 say so. + void InitFromRefAddresses( const ScDocument& rDoc, const ScRefAddress& rRef1, const ScRefAddress& rRef2, const ScAddress& rPos ); + + bool Valid(const ScDocument& rDoc) const; + + /** In external references nTab is -1 for the start tab and -1 for the end + tab if one sheet and the external document was not loaded but sheet was + cached, or >=0 also if more than one sheets. */ + bool ValidExternal(const ScDocument& rDoc) const; + + /** Whether this references entire columns, A:A */ + bool IsEntireCol( const ScSheetLimits& rLimits ) const; + + /** Whether this references entire rows, 1:1 */ + bool IsEntireRow( const ScSheetLimits& rLimits ) const; + + SC_DLLPUBLIC ScRange toAbs( const ScSheetLimits& rLimits, const ScAddress& rPos ) const; + SC_DLLPUBLIC ScRange toAbs( const ScDocument& rDoc, const ScAddress& rPos ) const; + + /** Set a new range, assuming that the ordering of the range matches the + ordering of the reference data flags already set. */ + void SetRange( const ScSheetLimits& rLimits, const ScRange& rRange, const ScAddress& rPos ); + + /** Adjust ordering (front-top-left/rear-bottom-right) to a new position. */ + void PutInOrder( const ScAddress& rPos ); + + bool operator==( const ScComplexRefData& r ) const + { return Ref1 == r.Ref1 && Ref2 == r.Ref2; } + /** Enlarge range if reference passed is not within existing range. + ScAddress position is used to calculate absolute references from + relative references. */ + ScComplexRefData& Extend( const ScSheetLimits& rLimits, const ScSingleRefData & rRef, const ScAddress & rPos ); + ScComplexRefData& Extend( const ScSheetLimits& rLimits, const ScComplexRefData & rRef, const ScAddress & rPos ); + + /** Increment or decrement end column unless or until sticky. + @see ScRange::IncEndColSticky() + @return TRUE if changed. */ + bool IncEndColSticky( const ScDocument& rDoc, SCCOL nDelta, const ScAddress& rPos ); + + /** Increment or decrement end row unless or until sticky. + @see ScRange::IncEndRowSticky() + @return TRUE if changed. */ + bool IncEndRowSticky( const ScDocument& rDoc, SCROW nDelta, const ScAddress& rPos ); + + bool IsDeleted() const; + + bool IsTrimToData() const { return bTrimToData; } + void SetTrimToData(bool bSet) { bTrimToData = bSet; } + +#if DEBUG_FORMULA_COMPILER + void Dump( int nIndent = 0 ) const; +#endif +}; + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |