diff options
Diffstat (limited to 'svx/source/svdraw/svdogrp.cxx')
| -rw-r--r-- | svx/source/svdraw/svdogrp.cxx | 794 |
1 files changed, 794 insertions, 0 deletions
diff --git a/svx/source/svdraw/svdogrp.cxx b/svx/source/svdraw/svdogrp.cxx new file mode 100644 index 0000000000..5878c8cd99 --- /dev/null +++ b/svx/source/svdraw/svdogrp.cxx @@ -0,0 +1,794 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <svx/svdogrp.hxx> + +#include <svx/svdmodel.hxx> +#include <svx/svdpage.hxx> +#include <svx/svdobj.hxx> +#include <svx/svdtrans.hxx> +#include <svx/dialmgr.hxx> +#include <svx/strings.hrc> + +#include <sdr/properties/groupproperties.hxx> +#include <sdr/contact/viewcontactofgroup.hxx> +#include <basegfx/range/b2drange.hxx> +#include <basegfx/polygon/b2dpolygontools.hxx> +#include <libxml/xmlwriter.h> +#include <vcl/canvastools.hxx> +#include <svx/diagram/IDiagramHelper.hxx> + +const std::shared_ptr< svx::diagram::IDiagramHelper >& SdrObjGroup::getDiagramHelper() const +{ + return mp_DiagramHelper; +} + +// BaseProperties section +std::unique_ptr<sdr::properties::BaseProperties> SdrObjGroup::CreateObjectSpecificProperties() +{ + return std::make_unique<sdr::properties::GroupProperties>(*this); +} + +// DrawContact section +std::unique_ptr<sdr::contact::ViewContact> SdrObjGroup::CreateObjectSpecificViewContact() +{ + return std::make_unique<sdr::contact::ViewContactOfGroup>(*this); +} + +SdrObjGroup::SdrObjGroup(SdrModel& rSdrModel) +: SdrObject(rSdrModel) +, SdrObjList() +, maRefPoint(0, 0) +, mp_DiagramHelper() +{ + m_bClosedObj=false; +} + +SdrObjGroup::SdrObjGroup(SdrModel& rSdrModel, SdrObjGroup const & rSource) +: SdrObject(rSdrModel, rSource) +, SdrObjList() +, maRefPoint(0, 0) +, mp_DiagramHelper() +{ + m_bClosedObj=false; + + // copy child SdrObjects + if(nullptr != rSource.GetSubList()) + { + // #i36404# Copy SubList, init model and page first + const SdrObjList& rSourceSubList(*rSource.GetSubList()); + + CopyObjects(rSourceSubList); + + // tdf#116979: needed here, we need bSnapRectDirty to be true + // which it is after using SdrObject::operator= (see above), + // but set to false again using CopyObjects + SetBoundAndSnapRectsDirty(); + } + + // copy local parameters + maRefPoint = rSource.maRefPoint; +} + +void SdrObjGroup::AddToHdlList(SdrHdlList& rHdlList) const +{ + // only for diagram, so do nothing for just groups + if(!isDiagram()) + return; + + svx::diagram::IDiagramHelper::AddAdditionalVisualization(*this, rHdlList); +} + +SdrObjGroup::~SdrObjGroup() +{ +} + +SdrPage* SdrObjGroup::getSdrPageFromSdrObjList() const +{ + return getSdrPageFromSdrObject(); +} + +SdrObject* SdrObjGroup::getSdrObjectFromSdrObjList() const +{ + return const_cast< SdrObjGroup* >(this); +} + +SdrObjList* SdrObjGroup::getChildrenOfSdrObject() const +{ + return const_cast< SdrObjGroup* >(this); +} + +void SdrObjGroup::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const +{ + rInfo.bNoContortion=false; + const size_t nObjCount(GetObjCount()); + for (const rtl::Reference<SdrObject>& pObj : *this) { + SdrObjTransformInfoRec aInfo; + pObj->TakeObjInfo(aInfo); + if (!aInfo.bMoveAllowed ) rInfo.bMoveAllowed =false; + if (!aInfo.bResizeFreeAllowed ) rInfo.bResizeFreeAllowed =false; + if (!aInfo.bResizePropAllowed ) rInfo.bResizePropAllowed =false; + if (!aInfo.bRotateFreeAllowed ) rInfo.bRotateFreeAllowed =false; + if (!aInfo.bRotate90Allowed ) rInfo.bRotate90Allowed =false; + if (!aInfo.bMirrorFreeAllowed ) rInfo.bMirrorFreeAllowed =false; + if (!aInfo.bMirror45Allowed ) rInfo.bMirror45Allowed =false; + if (!aInfo.bMirror90Allowed ) rInfo.bMirror90Allowed =false; + if (!aInfo.bShearAllowed ) rInfo.bShearAllowed =false; + if (!aInfo.bEdgeRadiusAllowed ) rInfo.bEdgeRadiusAllowed =false; + if (!aInfo.bNoOrthoDesired ) rInfo.bNoOrthoDesired =false; + if (aInfo.bNoContortion ) rInfo.bNoContortion =true; + if (!aInfo.bCanConvToPath ) rInfo.bCanConvToPath =false; + + if(!aInfo.bCanConvToContour) + rInfo.bCanConvToContour = false; + + if (!aInfo.bCanConvToPoly ) rInfo.bCanConvToPoly =false; + if (!aInfo.bCanConvToPathLineToArea) rInfo.bCanConvToPathLineToArea=false; + if (!aInfo.bCanConvToPolyLineToArea) rInfo.bCanConvToPolyLineToArea=false; + } + if (nObjCount==0) { + rInfo.bRotateFreeAllowed=false; + rInfo.bRotate90Allowed =false; + rInfo.bMirrorFreeAllowed=false; + rInfo.bMirror45Allowed =false; + rInfo.bMirror90Allowed =false; + rInfo.bTransparenceAllowed = false; + rInfo.bShearAllowed =false; + rInfo.bEdgeRadiusAllowed=false; + rInfo.bNoContortion =true; + } + if(nObjCount != 1) + { + // only allowed if single object selected + rInfo.bTransparenceAllowed = false; + } +} + +void SdrObjGroup::SetBoundRectDirty() +{ + // avoid resetting aOutRect which in case of this object is model data, + // not re-creatable view data +} + +SdrObjKind SdrObjGroup::GetObjIdentifier() const +{ + return SdrObjKind::Group; +} + +SdrLayerID SdrObjGroup::GetLayer() const +{ + SdrLayerID nLay = SdrObject::GetLayer(); + bool b1st = true; + for (const rtl::Reference<SdrObject>& pObject : *this) + { + SdrLayerID nLay1(pObject->GetLayer()); + if (b1st) { nLay=nLay1; b1st = false; } + else if (nLay1!=nLay) return SdrLayerID(0); + } + return nLay; +} + +void SdrObjGroup::NbcSetLayer(SdrLayerID nLayer) +{ + SdrObject::NbcSetLayer(nLayer); + for (const rtl::Reference<SdrObject>& pObj : *this) + pObj->NbcSetLayer(nLayer); +} + +void SdrObjGroup::handlePageChange(SdrPage* pOldPage, SdrPage* pNewPage) +{ + // call parent + SdrObject::handlePageChange(pOldPage, pNewPage); + + for (const rtl::Reference<SdrObject>& pObj : *this) + pObj->handlePageChange(pOldPage, pNewPage); +} + +SdrObjList* SdrObjGroup::GetSubList() const +{ + return const_cast< SdrObjGroup* >(this); +} + +static bool containsOOXData(const css::uno::Any& rVal) +{ + const css::uno::Sequence<css::beans::PropertyValue>& propList(rVal.get< css::uno::Sequence<css::beans::PropertyValue> >()); + for (const auto& rProp : std::as_const(propList)) + { + if(rProp.Name.startsWith("OOX")) + { + return true; + } + } + + return false; +} + +void SdrObjGroup::SetGrabBagItem(const css::uno::Any& rVal) +{ + // detect if the intention is to disable Diagram functionality + if(isDiagram() && !containsOOXData(rVal)) + { + css::uno::Any aOld; + GetGrabBagItem(aOld); + + if(containsOOXData(aOld)) + { + mp_DiagramHelper.reset(); + } + } + + // call parent + SdrObject::SetGrabBagItem(rVal); +} + +const tools::Rectangle& SdrObjGroup::GetCurrentBoundRect() const +{ + // <aOutRect> has to contain the bounding rectangle + if(0 != GetObjCount()) + { + setOutRectangleConst(GetAllObjBoundRect()); + } + + return getOutRectangle(); +} + +const tools::Rectangle& SdrObjGroup::GetSnapRect() const +{ + // <aOutRect> has to contain the bounding rectangle + if(0 != GetObjCount()) + { + return GetAllObjSnapRect(); + } + else + { + return getOutRectangle(); + } +} + +rtl::Reference<SdrObject> SdrObjGroup::CloneSdrObject(SdrModel& rTargetModel) const +{ + return new SdrObjGroup(rTargetModel, *this); +} + +OUString SdrObjGroup::TakeObjNameSingul() const +{ + OUString sName; + + if(0 == GetObjCount()) + { + sName = SvxResId(STR_ObjNameSingulGRUPEMPTY); + } + else + { + if(isDiagram()) + sName = SvxResId(STR_ObjNameSingulDIAGRAM); + else + sName = SvxResId(STR_ObjNameSingulGRUP); + } + + const OUString aName(GetName()); + + if (!aName.isEmpty()) + sName += " '" + aName + "'"; + + return sName; +} + + +OUString SdrObjGroup::TakeObjNamePlural() const +{ + if(0 == GetObjCount()) + return SvxResId(STR_ObjNamePluralGRUPEMPTY); + if(isDiagram()) + return SvxResId(RID_GALLERYSTR_THEME_DIAGRAMS); + return SvxResId(STR_ObjNamePluralGRUP); +} + + +void SdrObjGroup::RecalcSnapRect() +{ + // TODO: unnecessary, because we use the Rects from the SubList +} + +basegfx::B2DPolyPolygon SdrObjGroup::TakeXorPoly() const +{ + basegfx::B2DPolyPolygon aRetval; + + for (const rtl::Reference<SdrObject>& pObj : *this) + aRetval.append(pObj->TakeXorPoly()); + + if(!aRetval.count()) + { + const basegfx::B2DRange aRange = vcl::unotools::b2DRectangleFromRectangle(getOutRectangle()); + aRetval.append(basegfx::utils::createPolygonFromRect(aRange)); + } + + return aRetval; +} + +bool SdrObjGroup::beginSpecialDrag(SdrDragStat& /*rDrag*/) const +{ + return false; +} + + +bool SdrObjGroup::BegCreate(SdrDragStat& /*rStat*/) +{ + return false; +} + + +Degree100 SdrObjGroup::GetRotateAngle() const +{ + Degree100 nRetval(0); + + if(0 != GetObjCount()) + { + SdrObject* pObj(GetObj(0)); + + nRetval = pObj->GetRotateAngle(); + } + + return nRetval; +} + + +Degree100 SdrObjGroup::GetShearAngle(bool /*bVertical*/) const +{ + Degree100 nRetval(0); + + if(0 != GetObjCount()) + { + SdrObject* pObj(GetObj(0)); + + nRetval = pObj->GetShearAngle(); + } + + return nRetval; +} + + +void SdrObjGroup::NbcSetSnapRect(const tools::Rectangle& rRect) +{ + tools::Rectangle aOld(GetSnapRect()); + tools::Long nMulX=rRect.Right()-rRect.Left(); + tools::Long nDivX=aOld.Right()-aOld.Left(); + tools::Long nMulY=rRect.Bottom()-rRect.Top(); + tools::Long nDivY=aOld.Bottom()-aOld.Top(); + if (nDivX==0) { nMulX=1; nDivX=1; } + if (nDivY==0) { nMulY=1; nDivY=1; } + if (nMulX!=nDivX || nMulY!=nDivY) { + Fraction aX(nMulX,nDivX); + Fraction aY(nMulY,nDivY); + NbcResize(aOld.TopLeft(),aX,aY); + } + if (rRect.Left()!=aOld.Left() || rRect.Top()!=aOld.Top()) { + NbcMove(Size(rRect.Left()-aOld.Left(),rRect.Top()-aOld.Top())); + } +} + + +void SdrObjGroup::NbcSetLogicRect(const tools::Rectangle& rRect) +{ + NbcSetSnapRect(rRect); +} + + +void SdrObjGroup::NbcMove(const Size& rSize) +{ + maRefPoint.Move(rSize); + const size_t nObjCount(GetObjCount()); + + if(0 != nObjCount) + { + for (const rtl::Reference<SdrObject>& pObj : *this) + pObj->NbcMove(rSize); + } + else + { + moveOutRectangle(rSize.Width(), rSize.Height()); + SetBoundAndSnapRectsDirty(); + } +} + + +void SdrObjGroup::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact) +{ + bool bXMirr=(xFact.GetNumerator()<0) != (xFact.GetDenominator()<0); + bool bYMirr=(yFact.GetNumerator()<0) != (yFact.GetDenominator()<0); + if (bXMirr || bYMirr) { + Point aRef1(GetSnapRect().Center()); + if (bXMirr) { + Point aRef2(aRef1); + aRef2.AdjustY( 1 ); + NbcMirrorGluePoints(aRef1,aRef2); + } + if (bYMirr) { + Point aRef2(aRef1); + aRef2.AdjustX( 1 ); + NbcMirrorGluePoints(aRef1,aRef2); + } + } + + ResizePoint(maRefPoint, rRef, xFact, yFact); + + const size_t nObjCount(GetObjCount()); + if(0 != nObjCount) + { + for (const rtl::Reference<SdrObject>& pObj : *this) + pObj->NbcResize(rRef,xFact,yFact); + } + else + { + auto aRectangle = getOutRectangle(); + ResizeRect(aRectangle, rRef, xFact, yFact); + setOutRectangle(aRectangle); + + SetBoundAndSnapRectsDirty(); + } +} + + +void SdrObjGroup::NbcRotate(const Point& rRef, Degree100 nAngle, double sn, double cs) +{ + SetGlueReallyAbsolute(true); + RotatePoint(maRefPoint, rRef, sn, cs); + + for (const rtl::Reference<SdrObject>& pObj : *this) + pObj->NbcRotate(rRef,nAngle,sn,cs); + + NbcRotateGluePoints(rRef,nAngle,sn,cs); + SetGlueReallyAbsolute(false); +} + + +void SdrObjGroup::NbcMirror(const Point& rRef1, const Point& rRef2) +{ + SetGlueReallyAbsolute(true); + MirrorPoint(maRefPoint, rRef1, rRef2); // implementation missing in SvdEtc! + + for (const rtl::Reference<SdrObject>& pObj : *this) + pObj->NbcMirror(rRef1,rRef2); + + NbcMirrorGluePoints(rRef1,rRef2); + SetGlueReallyAbsolute(false); +} + + +void SdrObjGroup::NbcShear(const Point& rRef, Degree100 nAngle, double tn, bool bVShear) +{ + SetGlueReallyAbsolute(true); + ShearPoint(maRefPoint, rRef, tn); + + for (const rtl::Reference<SdrObject>& pObj : *this) + { + pObj->NbcShear(rRef,nAngle,tn,bVShear); + } + + NbcShearGluePoints(rRef,tn,bVShear); + SetGlueReallyAbsolute(false); +} + + +void SdrObjGroup::NbcSetAnchorPos(const Point& rPnt) +{ + m_aAnchor=rPnt; + Size aSiz(rPnt.X()-m_aAnchor.X(),rPnt.Y()-m_aAnchor.Y()); + maRefPoint.Move(aSiz); + + for (const rtl::Reference<SdrObject>& pObj : *this) + pObj->NbcSetAnchorPos(rPnt); +} + + +void SdrObjGroup::SetSnapRect(const tools::Rectangle& rRect) +{ + tools::Rectangle aBoundRect0; if (m_pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); + tools::Rectangle aOld(GetSnapRect()); + if (aOld.IsEmpty()) + { + Fraction aX(1,1); + Fraction aY(1,1); + Resize(aOld.TopLeft(),aX,aY); + } + else + { + tools::Long nMulX=rRect.Right()-rRect.Left(); + tools::Long nDivX=aOld.Right()-aOld.Left(); + tools::Long nMulY=rRect.Bottom()-rRect.Top(); + tools::Long nDivY=aOld.Bottom()-aOld.Top(); + if (nDivX==0) { nMulX=1; nDivX=1; } + if (nDivY==0) { nMulY=1; nDivY=1; } + if (nMulX!=nDivX || nMulY!=nDivY) { + Fraction aX(nMulX,nDivX); + Fraction aY(nMulY,nDivY); + Resize(aOld.TopLeft(),aX,aY); + } + } + if (rRect.Left()!=aOld.Left() || rRect.Top()!=aOld.Top()) { + Move(Size(rRect.Left()-aOld.Left(),rRect.Top()-aOld.Top())); + } + + SetChanged(); + BroadcastObjectChange(); + SendUserCall(SdrUserCallType::Resize,aBoundRect0); +} + + +void SdrObjGroup::SetLogicRect(const tools::Rectangle& rRect) +{ + SetSnapRect(rRect); +} + + +void SdrObjGroup::Move(const Size& rSiz) +{ + if (rSiz.Width()==0 && rSiz.Height()==0) + return; + + tools::Rectangle aBoundRect0; if (m_pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); + maRefPoint.Move(rSiz); + const size_t nObjCount(GetObjCount()); + + if(0 != nObjCount) + { + // first move the connectors, then everything else + for (const rtl::Reference<SdrObject>& pObj : *this) + { + if (pObj->IsEdgeObj()) + pObj->Move(rSiz); + } + + for (const rtl::Reference<SdrObject>& pObj : *this) + { + if (!pObj->IsEdgeObj()) + pObj->Move(rSiz); + } + } + else + { + moveOutRectangle(rSiz.Width(), rSiz.Height()); + SetBoundAndSnapRectsDirty(); + } + + SetChanged(); + BroadcastObjectChange(); + SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0); +} + + +void SdrObjGroup::Resize(const Point& rRef, const Fraction& xFact, const Fraction& yFact, bool bUnsetRelative) +{ + if (xFact.GetNumerator()==xFact.GetDenominator() && yFact.GetNumerator()==yFact.GetDenominator()) + return; + + bool bXMirr=(xFact.GetNumerator()<0) != (xFact.GetDenominator()<0); + bool bYMirr=(yFact.GetNumerator()<0) != (yFact.GetDenominator()<0); + if (bXMirr || bYMirr) { + Point aRef1(GetSnapRect().Center()); + if (bXMirr) { + Point aRef2(aRef1); + aRef2.AdjustY( 1 ); + NbcMirrorGluePoints(aRef1,aRef2); + } + if (bYMirr) { + Point aRef2(aRef1); + aRef2.AdjustX( 1 ); + NbcMirrorGluePoints(aRef1,aRef2); + } + } + tools::Rectangle aBoundRect0; if (m_pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); + ResizePoint(maRefPoint, rRef, xFact, yFact); + const size_t nObjCount(GetObjCount()); + + if(0 != nObjCount) + { + // move the connectors first, everything else afterwards + for (const rtl::Reference<SdrObject>& pObj : *this) + { + if (pObj->IsEdgeObj()) + pObj->Resize(rRef,xFact,yFact,bUnsetRelative); + } + + for (const rtl::Reference<SdrObject>& pObj : *this) + { + if (!pObj->IsEdgeObj()) + pObj->Resize(rRef,xFact,yFact,bUnsetRelative); + } + } + else + { + auto aRectangle = getOutRectangle(); + ResizeRect(aRectangle, rRef, xFact, yFact); + setOutRectangle(aRectangle); + + SetBoundAndSnapRectsDirty(); + } + + SetChanged(); + BroadcastObjectChange(); + SendUserCall(SdrUserCallType::Resize,aBoundRect0); +} + + +void SdrObjGroup::Rotate(const Point& rRef, Degree100 nAngle, double sn, double cs) +{ + if (nAngle==0_deg100) + return; + + SetGlueReallyAbsolute(true); + tools::Rectangle aBoundRect0; if (m_pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); + RotatePoint(maRefPoint, rRef, sn, cs); + // move the connectors first, everything else afterwards + + for (const rtl::Reference<SdrObject>& pObj : *this) + { + if (pObj->IsEdgeObj()) + pObj->Rotate(rRef,nAngle,sn,cs); + } + + for (const rtl::Reference<SdrObject>& pObj : *this) + { + if (!pObj->IsEdgeObj()) + pObj->Rotate(rRef,nAngle,sn,cs); + } + + NbcRotateGluePoints(rRef,nAngle,sn,cs); + SetGlueReallyAbsolute(false); + SetChanged(); + BroadcastObjectChange(); + SendUserCall(SdrUserCallType::Resize,aBoundRect0); +} + + +void SdrObjGroup::Mirror(const Point& rRef1, const Point& rRef2) +{ + SetGlueReallyAbsolute(true); + tools::Rectangle aBoundRect0; if (m_pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); + MirrorPoint(maRefPoint, rRef1, rRef2); // implementation missing in SvdEtc! + // move the connectors first, everything else afterwards + + for (const rtl::Reference<SdrObject>& pObj : *this) + { + if (pObj->IsEdgeObj()) + pObj->Mirror(rRef1,rRef2); + } + + for (const rtl::Reference<SdrObject>& pObj : *this) + { + if (!pObj->IsEdgeObj()) + pObj->Mirror(rRef1,rRef2); + } + + NbcMirrorGluePoints(rRef1,rRef2); + SetGlueReallyAbsolute(false); + SetChanged(); + BroadcastObjectChange(); + SendUserCall(SdrUserCallType::Resize,aBoundRect0); +} + + +void SdrObjGroup::Shear(const Point& rRef, Degree100 nAngle, double tn, bool bVShear) +{ + if (nAngle==0_deg100) + return; + + SetGlueReallyAbsolute(true); + tools::Rectangle aBoundRect0; if (m_pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); + ShearPoint(maRefPoint, rRef, tn); + // move the connectors first, everything else afterwards + + for (const rtl::Reference<SdrObject>& pObj : *this) + { + if (pObj->IsEdgeObj()) + pObj->Shear(rRef,nAngle,tn,bVShear); + } + + for (const rtl::Reference<SdrObject>& pObj : *this) + { + if (!pObj->IsEdgeObj()) + pObj->Shear(rRef,nAngle,tn,bVShear); + } + + NbcShearGluePoints(rRef,tn,bVShear); + SetGlueReallyAbsolute(false); + SetChanged(); + BroadcastObjectChange(); + SendUserCall(SdrUserCallType::Resize,aBoundRect0); + +} + + +void SdrObjGroup::SetAnchorPos(const Point& rPnt) +{ + tools::Rectangle aBoundRect0; if (m_pUserCall!=nullptr) aBoundRect0=GetLastBoundRect(); + bool bChg=m_aAnchor!=rPnt; + m_aAnchor=rPnt; + Size aSiz(rPnt.X()-m_aAnchor.X(),rPnt.Y()-m_aAnchor.Y()); + maRefPoint.Move(aSiz); + // move the connectors first, everything else afterwards + + for (const rtl::Reference<SdrObject>& pObj : *this) + { + if (pObj->IsEdgeObj()) + pObj->SetAnchorPos(rPnt); + } + + for (const rtl::Reference<SdrObject>& pObj : *this) + { + if (!pObj->IsEdgeObj()) + pObj->SetAnchorPos(rPnt); + } + + if (bChg) + { + SetChanged(); + BroadcastObjectChange(); + SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0); + } +} + + +void SdrObjGroup::NbcSetRelativePos(const Point& rPnt) +{ + Point aRelPos0(GetSnapRect().TopLeft()-m_aAnchor); + Size aSiz(rPnt.X()-aRelPos0.X(),rPnt.Y()-aRelPos0.Y()); + NbcMove(aSiz); // this also calls SetRectsDirty() +} + +void SdrObjGroup::SetRelativePos(const Point& rPnt) +{ + Point aRelPos0(GetSnapRect().TopLeft()-m_aAnchor); + Size aSiz(rPnt.X()-aRelPos0.X(),rPnt.Y()-aRelPos0.Y()); + if (aSiz.Width()!=0 || aSiz.Height()!=0) Move(aSiz); // this also calls SetRectsDirty() and Broadcast, ... +} + +void SdrObjGroup::NbcReformatText() +{ + NbcReformatAllTextObjects(); +} + +rtl::Reference<SdrObject> SdrObjGroup::DoConvertToPolyObj(bool bBezier, bool bAddText) const +{ + rtl::Reference<SdrObject> pGroup( new SdrObjGroup(getSdrModelFromSdrObject()) ); + + for (const rtl::Reference<SdrObject>& pIterObj : *this) + { + rtl::Reference<SdrObject> pResult(pIterObj->DoConvertToPolyObj(bBezier, bAddText)); + + // pResult can be NULL e.g. for empty objects + if( pResult ) + pGroup->GetSubList()->NbcInsertObject(pResult.get()); + } + + return pGroup; +} + +void SdrObjGroup::dumpAsXml(xmlTextWriterPtr pWriter) const +{ + (void)xmlTextWriterStartElement(pWriter, BAD_CAST("SdrObjGroup")); + (void)xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("ptr"), "%p", this); + + SdrObject::dumpAsXml(pWriter); + SdrObjList::dumpAsXml(pWriter); + + (void)xmlTextWriterEndElement(pWriter); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |