diff options
Diffstat (limited to 'sw/inc/swrect.hxx')
| -rw-r--r-- | sw/inc/swrect.hxx | 413 |
1 files changed, 413 insertions, 0 deletions
diff --git a/sw/inc/swrect.hxx b/sw/inc/swrect.hxx new file mode 100644 index 0000000000..eeb02df23c --- /dev/null +++ b/sw/inc/swrect.hxx @@ -0,0 +1,413 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ +#pragma once + +#include <ostream> + +#include <sal/log.hxx> +#include <tools/gen.hxx> +#include "swdllapi.h" + +class SvStream; +typedef struct _xmlTextWriter* xmlTextWriterPtr; + +/// *Of course* Writer needs its own rectangles. +/// This is half-open so m_Point.X() + m_Size.getWidth() is *not* included. +/// Note the tools Rectangle is (usually? sometimes?) closed so there's a +/// SVRect() to subtract 1 for the conversion. +class SAL_WARN_UNUSED SW_DLLPUBLIC SwRect +{ + Point m_Point; + Size m_Size; + +public: + inline SwRect(); + inline SwRect( const SwRect &rRect ) = default; + inline SwRect( const Point& rLT, const Size& rSize ); + inline SwRect( const Point& rLT, const Point& rRB ); + inline SwRect( tools::Long X, tools::Long Y, tools::Long Width, tools::Long Height ); + + //SV-SS e.g. SwRect( pWin->GetClipRect() ); + explicit SwRect( const tools::Rectangle &rRect ); + + //Set-Methods + inline void Chg( const Point& rNP, const Size &rNS ); + inline void Pos( const Point& rNew ); + inline void Pos( const tools::Long nNewX, const tools::Long nNewY ); + inline void SSize( const Size& rNew ); + inline void SSize( const tools::Long nHeight, const tools::Long nWidth ); + inline void Width( tools::Long nNew ); + inline void Height( tools::Long nNew ); + inline void Left( const tools::Long nLeft ); + inline void Right( const tools::Long nRight ); + inline void Top( const tools::Long nTop ); + inline void Bottom( const tools::Long nBottom ); + + //Get-Methods + inline const Point &Pos() const; + inline const Size &SSize() const; + inline tools::Long Width() const; + inline tools::Long Height() const; + inline tools::Long Left() const; + inline tools::Long Right() const; + inline tools::Long Top() const; + inline tools::Long Bottom() const; + + // In order to be able to access the members of Pos and SSize from the layout side. + inline Point &Pos(); + + Point Center() const; + + void Justify(); + + SwRect &Union( const SwRect& rRect ); + SwRect &Intersection( const SwRect& rRect ); + + SwRect GetUnion( const SwRect& rRect ) const; + SwRect GetIntersection( const SwRect& rRect ) const; + + // Same as Intersection, only assume that Rects are overlapping! + SwRect &Intersection_( const SwRect &rRect ); + + bool Contains( const Point& rPOINT ) const; + bool Contains( const SwRect& rRect ) const; + bool Overlaps( const SwRect& rRect ) const; + bool IsNear(const Point& rPoint, tools::Long nTolerance ) const; + inline bool HasArea() const; + inline bool IsEmpty() const; + inline void Clear(); + + SwRect &operator = ( const SwRect &rRect ) = default; + + inline bool operator == ( const SwRect& rRect ) const; + inline bool operator != ( const SwRect& rRect ) const; + + inline SwRect &operator+=( const Point &rPt ); + inline SwRect &operator-=( const Point &rPt ); + + //SV-SS e.g. pWin->DrawRect( aSwRect.SVRect() ); + inline tools::Rectangle SVRect() const; + + // Output operator for debugging. + friend SvStream& WriteSwRect( SvStream &rStream, const SwRect &rRect ); + void dumpAsXmlAttributes(xmlTextWriterPtr writer) const; + + void Top_( const tools::Long nTop ); + void Bottom_( const tools::Long nBottom ); + void Left_( const tools::Long nLeft ); + void Right_( const tools::Long nRight ); + void Width_( const tools::Long nNew ); + void Height_( const tools::Long nNew ); + tools::Long Top_() const; + tools::Long Bottom_() const; + tools::Long Left_() const; + tools::Long Right_() const; + tools::Long Width_() const; + tools::Long Height_() const; + void SubTop( const tools::Long nSub ); + void AddTop( const tools::Long nAdd ); + void AddBottom( const tools::Long nAdd ); + void AddLeft( const tools::Long nAdd ); + void SubLeft( const tools::Long nSub ); + void AddRight( const tools::Long nAdd ); + void AddWidth( const tools::Long nAdd ); + void AddHeight( const tools::Long nAdd ); + void SetPosX( const tools::Long nNew ); + void SetPosY( const tools::Long nNew ); + void SetLeftAndWidth( tools::Long nLeft, tools::Long nNew ); + void SetTopAndHeight( tools::Long nTop, tools::Long nNew ); + void SetRightAndWidth( tools::Long nRight, tools::Long nNew ); + void SetBottomAndHeight( tools::Long nBottom, tools::Long nNew ); + void SetUpperLeftCorner( const Point& rNew ); + void SetUpperRightCorner( const Point& rNew ); + void SetLowerLeftCorner( const Point& rNew ); + Size Size_() const; + Point TopLeft() const; + Point TopRight() const; + Point BottomLeft() const; + Point BottomRight() const; + Size SwappedSize() const; + tools::Long GetLeftDistance( tools::Long ) const; + tools::Long GetBottomDistance( tools::Long ) const; + tools::Long GetRightDistance( tools::Long ) const; + tools::Long GetTopDistance( tools::Long ) const; + bool OverStepLeft( tools::Long ) const; + bool OverStepBottom( tools::Long ) const; + bool OverStepTop( tools::Long ) const; + bool OverStepRight( tools::Long ) const; +}; + +typedef void (SwRect::*SwRectSet)( const tools::Long nNew ); +typedef tools::Long (SwRect::*SwRectGet)() const; +typedef Point (SwRect::*SwRectPoint)() const; +typedef Size (SwRect::*SwRectSize)() const; +typedef bool (SwRect::*SwRectMax)( tools::Long ) const; +typedef tools::Long (SwRect::*SwRectDist)( tools::Long ) const; +typedef void (SwRect::*SwRectSetTwice)( tools::Long, tools::Long ); +typedef void (SwRect::*SwRectSetPos)( const Point& ); + +// Set-Methods +inline void SwRect::Chg( const Point& rNP, const Size &rNS ) +{ + m_Point = rNP; + m_Size = rNS; +} +inline void SwRect::Pos( const Point& rNew ) +{ + m_Point = rNew; +} +inline void SwRect::Pos( const tools::Long nNewX, const tools::Long nNewY ) +{ + m_Point.setX(nNewX); + m_Point.setY(nNewY); +} +inline void SwRect::SSize( const Size& rNew ) +{ + m_Size = rNew; +} +inline void SwRect::SSize( const tools::Long nNewHeight, const tools::Long nNewWidth ) +{ + m_Size.setWidth(nNewWidth); + m_Size.setHeight(nNewHeight); +} +inline void SwRect::Width( tools::Long nNew ) +{ + m_Size.setWidth(nNew); +} +inline void SwRect::Height( tools::Long nNew ) +{ + m_Size.setHeight(nNew); +} +inline void SwRect::Left( const tools::Long nLeft ) +{ + m_Size.AdjustWidth( m_Point.getX() - nLeft ); + m_Point.setX(nLeft); +} +inline void SwRect::Right( const tools::Long nRight ) +{ + m_Size.setWidth(nRight - m_Point.getX() + 1); +} +inline void SwRect::Top( const tools::Long nTop ) +{ + m_Size.AdjustHeight( m_Point.getY() - nTop ); + m_Point.setY(nTop); +} +inline void SwRect::Bottom( const tools::Long nBottom ) +{ + m_Size.setHeight(nBottom - m_Point.getY() + 1); +} + +// Get-Methods +inline const Point &SwRect::Pos() const +{ + return m_Point; +} +inline Point &SwRect::Pos() +{ + return m_Point; +} +inline const Size &SwRect::SSize() const +{ + return m_Size; +} +inline tools::Long SwRect::Width() const +{ + return m_Size.Width(); +} +inline tools::Long SwRect::Height() const +{ + return m_Size.Height(); +} +inline tools::Long SwRect::Left() const +{ + return m_Point.X(); +} +inline tools::Long SwRect::Right() const +{ + return m_Size.getWidth() ? m_Point.getX() + m_Size.getWidth() - 1 : m_Point.getX(); +} +inline tools::Long SwRect::Top() const +{ + return m_Point.Y(); +} +inline tools::Long SwRect::Bottom() const +{ + return m_Size.getHeight() ? m_Point.getY() + m_Size.getHeight() - 1 : m_Point.getY(); +} + +inline Point SwRect::TopLeft() const +{ + return Point( Left(), Top()); +} +inline Point SwRect::TopRight() const +{ + return Point( Right(), Top()); +} +inline Point SwRect::BottomLeft() const +{ + return Point( Left(), Bottom()); +} +inline Point SwRect::BottomRight() const +{ + return Point( Right(), Bottom()); +} + +inline bool SwRect::operator == ( const SwRect& rRect ) const +{ + return (m_Point == rRect.m_Point && m_Size == rRect.m_Size); +} +inline bool SwRect::operator != ( const SwRect& rRect ) const +{ + return (m_Point != rRect.m_Point || m_Size != rRect.m_Size); +} + +inline SwRect &SwRect::operator+=( const Point &rPt ) +{ + m_Point += rPt; + return *this; +} +inline SwRect &SwRect::operator-=( const Point &rPt ) +{ + m_Point -= rPt; + return *this; +} + +// other +inline tools::Rectangle SwRect::SVRect() const +{ + SAL_INFO_IF( IsEmpty(), "sw.core", "SVRect() without Width or Height" ); + return tools::Rectangle( m_Point.getX(), m_Point.getY(), + m_Point.getX() + m_Size.getWidth() - 1, //Right() + m_Point.getY() + m_Size.getHeight() - 1 ); //Bottom() +} + +inline bool SwRect::HasArea() const +{ + return !IsEmpty(); +} +inline bool SwRect::IsEmpty() const +{ + return !(m_Size.getHeight() && m_Size.getWidth()); +} +inline void SwRect::Clear() +{ + m_Point.setX(0); + m_Point.setY(0); + m_Size.setWidth(0); + m_Size.setHeight(0); +} + +// constructors +inline SwRect::SwRect() : + m_Point( 0, 0 ), + m_Size( 0, 0 ) +{ +} +inline SwRect::SwRect( const Point& rLT, const Size& rSize ) : + m_Point( rLT ), + m_Size( rSize ) +{ +} +inline SwRect::SwRect( const Point& rLT, const Point& rRB ) : + m_Point( rLT ), + m_Size( rRB.X() - rLT.X() + 1, rRB.Y() - rLT.Y() + 1 ) +{ +} +inline SwRect::SwRect( tools::Long X, tools::Long Y, tools::Long W, tools::Long H ) : + m_Point( X, Y ), + m_Size( W, H ) +{ +} + +inline Point SwRect::Center() const +{ + return Point( Left() + Width() / 2, + Top() + Height() / 2 ); +} + +inline bool SwRect::Contains( const SwRect& rRect ) const +{ + const tools::Long nRight = Right(); + const tools::Long nBottom = Bottom(); + const tools::Long nrRight = rRect.Right(); + const tools::Long nrBottom= rRect.Bottom(); + return (Left() <= rRect.Left()) && (rRect.Left()<= nRight) && + (Left() <= nrRight) && (nrRight <= nRight) && + (Top() <= rRect.Top()) && (rRect.Top() <= nBottom) && + (Top() <= nrBottom) && (nrBottom <= nBottom); +} + +inline bool SwRect::Contains( const Point& rPoint ) const +{ + return (Left() <= rPoint.X()) && + (Top() <= rPoint.Y()) && + (Right() >= rPoint.X()) && + (Bottom()>= rPoint.Y()); +} + +// mouse moving of table borders +inline bool SwRect::IsNear( const Point& rPoint, tools::Long nTolerance ) const +{ + bool bIsNearby = (((Left() - nTolerance) <= rPoint.X()) && + ((Top() - nTolerance) <= rPoint.Y()) && + ((Right() + nTolerance) >= rPoint.X()) && + ((Bottom() + nTolerance) >= rPoint.Y())); + return Contains(rPoint) || bIsNearby; +} + +inline bool SwRect::Overlaps( const SwRect& rRect ) const +{ + return (Top() <= rRect.Bottom()) && + (Left() <= rRect.Right()) && + (Right() >= rRect.Left()) && + (Bottom()>= rRect.Top()); +} + +inline SwRect SwRect::GetUnion( const SwRect& rRect ) const +{ + return IsEmpty() ? rRect : rRect.IsEmpty() ? *this : SwRect( + Point( std::min( Left(), rRect.Left()), + std::min( Top(), rRect.Top())), + Point( std::max( Right(), rRect.Right()), + std::max( Bottom(), rRect.Bottom()))); +} + +inline SwRect SwRect::GetIntersection( const SwRect& rRect ) const +{ + return Overlaps( rRect ) + ? SwRect( + Point( std::max( Left(), rRect.Left()), + std::max( Top(), rRect.Top())), + Point( std::min( Right(), rRect.Right()), + std::min( Bottom(), rRect.Bottom()))) + : SwRect(); +} + + +template< typename charT, typename traits > +inline std::basic_ostream<charT, traits> & operator <<( + std::basic_ostream<charT, traits> & stream, const SwRect& rectangle ) +{ + if (rectangle.IsEmpty()) + stream << "EMPTY:"; + return stream << rectangle.SSize() + << "@(" << rectangle.Pos() << ")"; +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |