diff options
Diffstat (limited to 'sw/source/ui/envelp/envprt.cxx')
| -rw-r--r-- | sw/source/ui/envelp/envprt.cxx | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/sw/source/ui/envelp/envprt.cxx b/sw/source/ui/envelp/envprt.cxx new file mode 100644 index 0000000000..d08f718e1f --- /dev/null +++ b/sw/source/ui/envelp/envprt.cxx @@ -0,0 +1,190 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <vcl/print.hxx> +#include <svtools/prnsetup.hxx> +#include <svtools/unitconv.hxx> + +#include <cmdid.h> +#include "envprt.hxx" +#include <envlop.hxx> +#include <uitool.hxx> + +SwEnvPrtPage::SwEnvPrtPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rSet) + : SfxTabPage(pPage, pController, "modules/swriter/ui/envprinterpage.ui", "EnvPrinterPage", &rSet) + , m_xUpper(m_xBuilder->weld_widget("upper")) + , m_xLower(m_xBuilder->weld_widget("lower")) + , m_xTopButton(m_xBuilder->weld_radio_button("top")) + , m_xBottomButton(m_xBuilder->weld_radio_button("bottom")) + , m_xRightField(m_xBuilder->weld_metric_spin_button("right", FieldUnit::CM)) + , m_xDownField(m_xBuilder->weld_metric_spin_button("down", FieldUnit::CM)) + , m_xPrinterInfo(m_xBuilder->weld_label("printername")) + , m_xPrtSetup(m_xBuilder->weld_button("setup")) + , m_aIdsL { m_xBuilder->weld_radio_button("horileftl"), + m_xBuilder->weld_radio_button("horicenterl"), + m_xBuilder->weld_radio_button("horirightl"), + m_xBuilder->weld_radio_button("vertleftl"), + m_xBuilder->weld_radio_button("vertcenterl"), + m_xBuilder->weld_radio_button("vertrightl") } + , m_aIdsU { m_xBuilder->weld_radio_button("horileftu"), + m_xBuilder->weld_radio_button("horicenteru"), + m_xBuilder->weld_radio_button("horirightu"), + m_xBuilder->weld_radio_button("vertleftu"), + m_xBuilder->weld_radio_button("vertcenteru"), + m_xBuilder->weld_radio_button("vertrightu") } +{ + SetExchangeSupport(); + + // Metrics + FieldUnit eUnit = ::GetDfltMetric(false); + ::SetFieldUnit(*m_xRightField, eUnit); + ::SetFieldUnit(*m_xDownField, eUnit); + + // Install handlers + m_xTopButton->connect_toggled(LINK(this, SwEnvPrtPage, ClickHdl)); + m_xBottomButton->connect_toggled(LINK(this, SwEnvPrtPage, ClickHdl)); + + m_xPrtSetup->connect_clicked(LINK(this, SwEnvPrtPage, ButtonHdl)); + + for (auto& a : m_aIdsL) + a->connect_toggled(LINK(this, SwEnvPrtPage, LowerHdl)); + for (auto& a : m_aIdsU) + a->connect_toggled(LINK(this, SwEnvPrtPage, UpperHdl)); + + // Bitmaps + ClickHdl(*m_xBottomButton); +} + +SwEnvPrtPage::~SwEnvPrtPage() +{ + m_xPrt.clear(); +} + +IMPL_LINK_NOARG(SwEnvPrtPage, ClickHdl, weld::Toggleable&, void) +{ + // Envelope from bottom, otherwise Envelope from top + const bool bLowerActive = m_xBottomButton->get_active(); + m_xUpper->set_visible(!bLowerActive); + m_xLower->set_visible(bLowerActive); +} + +IMPL_LINK(SwEnvPrtPage, LowerHdl, weld::Toggleable&, rButton, void) +{ + for (int i = ENV_HOR_LEFT; i <= ENV_VER_RGHT; ++i) + { + if (&rButton == m_aIdsL[i].get()) + { + m_aIdsU[i]->set_active(m_aIdsL[i]->get_active()); + break; + } + } +} + +IMPL_LINK(SwEnvPrtPage, UpperHdl, weld::Toggleable&, rButton, void) +{ + for (int i = ENV_HOR_LEFT; i <= ENV_VER_RGHT; ++i) + { + if (&rButton == m_aIdsU[i].get()) + { + m_aIdsL[i]->set_active(m_aIdsU[i]->get_active()); + break; + } + } +} + +IMPL_LINK(SwEnvPrtPage, ButtonHdl, weld::Button&, rBtn, void) +{ + if (&rBtn == m_xPrtSetup.get()) + { + // Call printer setup + if (m_xPrt) + { + PrinterSetupDialog aDlg(GetFrameWeld()); + aDlg.SetPrinter(m_xPrt); + aDlg.run(); + rBtn.grab_focus(); + m_xPrinterInfo->set_label(m_xPrt->GetName()); + } + } +} + +std::unique_ptr<SfxTabPage> SwEnvPrtPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rSet) +{ + return std::make_unique<SwEnvPrtPage>(pPage, pController, *rSet); +} + +void SwEnvPrtPage::ActivatePage(const SfxItemSet&) +{ + if (m_xPrt) + m_xPrinterInfo->set_label(m_xPrt->GetName()); +} + +DeactivateRC SwEnvPrtPage::DeactivatePage(SfxItemSet* _pSet) +{ + if( _pSet ) + FillItemSet(_pSet); + return DeactivateRC::LeavePage; +} + +void SwEnvPrtPage::FillItem(SwEnvItem& rItem) +{ + int nOrient = 0; + for (int i = ENV_HOR_LEFT; i <= ENV_VER_RGHT; ++i) + { + assert(m_aIdsL[i]->get_active() == m_aIdsU[i]->get_active()); + if (m_aIdsL[i]->get_active()) + { + nOrient = i; + break; + } + } + + rItem.m_eAlign = static_cast<SwEnvAlign>(nOrient); + rItem.m_bPrintFromAbove = m_xTopButton->get_active(); + rItem.m_nShiftRight = getfieldval(*m_xRightField); + rItem.m_nShiftDown = getfieldval(*m_xDownField); +} + +bool SwEnvPrtPage::FillItemSet(SfxItemSet* rSet) +{ + FillItem(GetParentSwEnvDlg()->m_aEnvItem); + rSet->Put(GetParentSwEnvDlg()->m_aEnvItem); + return true; +} + +void SwEnvPrtPage::Reset(const SfxItemSet* rSet) +{ + // Read item + const SwEnvItem& rItem = static_cast<const SwEnvItem&>( rSet->Get(FN_ENVELOP) ); + m_aIdsL[rItem.m_eAlign]->set_active(true); + m_aIdsU[rItem.m_eAlign]->set_active(true); + + if (rItem.m_bPrintFromAbove) + m_xTopButton->set_active(true); + else + m_xBottomButton->set_active(true); + + setfieldval(*m_xRightField, rItem.m_nShiftRight); + setfieldval(*m_xDownField , rItem.m_nShiftDown ); + + ActivatePage(*rSet); + ClickHdl(*m_xTopButton); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |