From 267c6f2ac71f92999e969232431ba04678e7437e Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 15 Apr 2024 07:54:39 +0200 Subject: Adding upstream version 4:24.2.0. Signed-off-by: Daniel Baumann --- include/unotools/viewoptions.hxx | 223 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 223 insertions(+) create mode 100644 include/unotools/viewoptions.hxx (limited to 'include/unotools/viewoptions.hxx') diff --git a/include/unotools/viewoptions.hxx b/include/unotools/viewoptions.hxx new file mode 100644 index 0000000000..73c928efab --- /dev/null +++ b/include/unotools/viewoptions.hxx @@ -0,0 +1,223 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ +#ifndef INCLUDED_UNOTOOLS_VIEWOPTIONS_HXX +#define INCLUDED_UNOTOOLS_VIEWOPTIONS_HXX + +#include +#include +#include +#include + +namespace com::sun::star::beans { struct NamedValue; } +namespace com::sun::star::container { class XNameAccess; } + +/*-************************************************************************************************************ + @descr Use these enum values to specify right list in configuration in which your view data are saved. +*//*-*************************************************************************************************************/ + +enum class EViewType +{ + Dialog = 0, + TabDialog = 1, + TabPage = 2, + Window = 3 +}; + +/*-************************************************************************************************************ + @short collect information about view features + @descr We support different basetypes of views like dialogs, tab-dialogs, tab-pages and normal windows. + You must specify your basetype by using right enum value and must give us a valid name for your + subkey in registry! We support some fix features for some bastypes and user data as string for all! + see also configuration package "org.openoffice.Office.Views/..." for further information. + + template of configuration: + DialogType + /WindowState [string] + /UserData [set of any scalar types] + TabDialogType + /WindowState [string] + /UserData [set of any scalar types] + /PageID [int] + TabPageType + /WindowState [string] + /UserData [set of any scalar types] + WindowType + /WindowState [string] + /UserData [set of any scalar types] + /Visible [boolean] + + structure of configuration: + + org.openoffice.Office.Views [package] + /Dialogs [set] + /Dialog_FileOpen [DialogType] + /Dialog_ImportGraphics [DialogType] + ... + /Dialog_ [DialogType] + + /TabDialogs [set] + /TabDialog_001 [TabDialogType] + /TabDialog_Blubber [TabDialogType] + ... + /TabDialog_ [TabDialogType] + + /TabPages [set] + /TabPage_XXX [TabPageType] + /TabPage_Date [TabPageType] + ... + /TabPage_ [TabPageType] + + /Windows [set] + /Window_User [WindowType] + /Window_Options [WindowType] + ... + /Window_ [WindowType] + @devstatus ready to use +*//*-*************************************************************************************************************/ + +class SAL_WARN_UNUSED UNOTOOLS_DLLPUBLIC SvtViewOptions final +{ + + // public methods + + public: + + // constructor / destructor + + /*-**************************************************************************************************** + @short standard constructor and destructor + @descr This will de-/initialize an instance with default values. + You must give us the basic type of your view and a name which specify right entry + in dynamical configuration list. If entry not exist, we create a new one! + + @seealso enum EViewType + + @param "eType" specify type of your view and is used to use right data container! + @param "sViewName" specify the name of your view and is the key name in data list too. + @onerror An assertion is thrown in debug version. Otherwise we do nothing! + *//*-*****************************************************************************************************/ + + SvtViewOptions( EViewType eType, OUString sViewName ); + + // interface + + /*-**************************************************************************************************** + @short use it to get information about existing entries in configuration + @descr The methods to set/get the position or size will create a new entry automatically if + it not already exist and work with default values! + If this a problem for you - you MUST call these method before and + you must make up your own mind about that. + @onerror No error should occur. + *//*-*****************************************************************************************************/ + + bool Exists() const; + + /*-**************************************************************************************************** + @short use it to delete an entry of dynamic view set + @descr You can use this method to delete an existing node in configuration. + But if you call a Set- or Get- method again on this instance + the item is created again! If you do nothing after this call + your view will die relay in configuration... + + @seealso method Exist() + *//*-*****************************************************************************************************/ + + void Delete(); + + /*-**************************************************************************************************** + @short use it to set/get the window state of your view + @descr These value describe position/size and some other states of a window. + Use it with right vcl methods directly. Normally it's not necessary to + parse given string! + + @seealso vcl methods + *//*-*****************************************************************************************************/ + + OUString GetWindowState( ) const; + void SetWindowState( const OUString& sState ); + + /*-**************************************************************************************************** + @short use it to set/get the page number which was the last active one + @descr It's only supported for: - tab-dialogs + If you call it for other ones you will get an assertion in debug version. + In a product version we do nothing! + @onerror An assertion is thrown in debug version. Otherwise we do nothing! + *//*-*****************************************************************************************************/ + + OUString GetPageID() const; + void SetPageID(const OUString& rID); + + /*-**************************************************************************************************** + @short use it to set/get the visual state of a window + @descr It's only supported for: - windows + If you call it for other ones you will get an assertion in debug version. + In a product version we do nothing! + @onerror An assertion is thrown in debug version. Otherwise we do nothing! + *//*-*****************************************************************************************************/ + + bool IsVisible ( ) const; + void SetVisible( bool bState ); + + /** Return true if the "Visible" property actually has a non-nil value + + (IsVisible will somewhat arbitrarily return false if the property is + nil.) + */ + bool HasVisible() const; + + /*-**************************************************************************************************** + @short use it to set/get the extended user data (consisting of a set of named scalar values) + @descr It's supported for ALL types! + Every view can handle its own user defined data set. + @onerror In the non-product version, an assertion is made. In a product version, errors are silently ignored. + *//*-*****************************************************************************************************/ + css::uno::Sequence< css::beans::NamedValue > GetUserData( ) const; + void SetUserData( const css::uno::Sequence< css::beans::NamedValue >& lData ); + + /*-**************************************************************************************************** + @short use it to set/get ONE special user data item directly + @descr Normally you can work on full user data list by using "Set/GetUserData()". + With this function you have an access on special list entries directly without any + @onerror In the non-product version, an assertion is made. In a product version, errors are silently ignored. + *//*-*****************************************************************************************************/ + + css::uno::Any GetUserItem( const OUString& sName ) const; + void SetUserItem( const OUString& sName , + const css::uno::Any& aValue ); + + private: + enum State { STATE_NONE, STATE_FALSE, STATE_TRUE }; + + css::uno::Reference< css::uno::XInterface > impl_getSetNode( const OUString& sNode , + bool bCreateIfMissing) const; + State GetVisible() const; + + /// specify which list of views in configuration is used! This can't be a static value!!! + /// ... because we need this value to work with right static data container. + EViewType m_eViewType; + OUString m_sViewName; + + OUString m_sListName; + css::uno::Reference< css::container::XNameAccess > m_xRoot; + css::uno::Reference< css::container::XNameAccess > m_xSet; +}; // class SvtViewOptions + +#endif // INCLUDED_UNOTOOLS_VIEWOPTIONS_HXX + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ -- cgit v1.2.3