From 267c6f2ac71f92999e969232431ba04678e7437e Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Mon, 15 Apr 2024 07:54:39 +0200
Subject: Adding upstream version 4:24.2.0.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 offapi/com/sun/star/sdbc/XOutParameters.idl | 124 ++++++++++++++++++++++++++++
 1 file changed, 124 insertions(+)
 create mode 100644 offapi/com/sun/star/sdbc/XOutParameters.idl

(limited to 'offapi/com/sun/star/sdbc/XOutParameters.idl')

diff --git a/offapi/com/sun/star/sdbc/XOutParameters.idl b/offapi/com/sun/star/sdbc/XOutParameters.idl
new file mode 100644
index 0000000000..ac6c39c998
--- /dev/null
+++ b/offapi/com/sun/star/sdbc/XOutParameters.idl
@@ -0,0 +1,124 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+ module com {  module sun {  module star {  module sdbc {
+
+
+/** is used to register Out-Parameters for stored procedures.
+
+
+    <p>
+    SDBC provides a stored procedure SQL escape that allows stored procedures
+    to be called in a standard way for all RDBMSs. This escape syntax has one
+    form that includes a result parameter and one that does not. If used, the
+    result parameter must be registered as an OUT parameter. The other parameters
+    can be used for input, output, or both. Parameters are referred to sequentially,
+    by number. The first parameter is 1.
+    </p>
+ */
+published interface XOutParameters: com::sun::star::uno::XInterface
+{
+
+    /** registers the designated output parameter.  This version of
+        the method
+        com::sun::star::sdbc::XOutParameters::registerOutParameter()
+        should be used for a user-named or REF output parameter. Examples
+        of user-named types include: STRUCT, DISTINCT, OBJECT, and named array
+        types.
+
+        <p>
+        Before executing a stored procedure call, you must explicitly
+        call
+        com::sun::star::sdbc::XOutParameters::registerOutParameter()
+        to register the type from
+        com::sun::star::sdbc::DataType
+        for each OUT parameter.
+        <br/>
+        For a user-named parameter the fully-qualified SQL type name of the
+        parameter should also be given, while a REF parameter requires that the
+        fully-qualified type name of the referenced type be given.
+        An SDBC driver that does not need the type code and type name information
+        may ignore it. To be portable, however, applications should always provide
+        these values for user-named and REF parameters.
+        </p>
+        <p>Although it is intended for user-named and REF parameters,
+        this method may be used to register a parameter of any SDBC type.
+        If the parameter does not have a user-named or REF type, the
+        typeName parameter is ignored.
+        </p>
+        <p>
+        <b>Note:</b> When reading the value of an out parameter, you
+        must use the
+        <code>getXXX</code>
+        method whose type XXX corresponds to the
+        parameter's registered SQL type.
+        </p>
+        @param parameterIndex
+            the first parameter is 1, the second is 2, ...
+        @param sqlType
+            the type of the column to register
+        @param typeName
+            the name of the type
+        @throws SQLException
+            if a database access error occurs.
+     */
+    void registerOutParameter([in]long parameterIndex, [in]long sqlType,
+                              [in]string typeName)
+        raises (SQLException);
+
+    /** registers the OUT parameter in ordinal position
+        <code>parameterIndex</code>
+        to the SDBC type <code>sqlType</code>. All
+        OUT parameters must be registered before a stored procedure is executed.
+
+
+        <p>
+        The SDBC type specified by
+        <code>sqlType</code>
+        for an OUT parameter determines the type that must be used in the
+        <code>get</code>
+        method to read the value of that parameter.
+        This version of
+        com::sun::star::sdbc::XOutParameters::registerOutParameter()
+        should be
+        used when the parameter is of SDBC type
+        com::sun::star::sdbc::DataType::NUMERIC
+        or com::sun::star::sdbc::DataType::DECIMAL.
+        @param parameterIndex
+            the first parameter is 1, the second is 2, ...
+        @param sqlType
+            the type of the column to register
+        @param scale
+            the scale of the type
+        @throws SQLException
+            if a database access error occurs.
+        </p>
+     */
+    void registerNumericOutParameter([in]long parameterIndex, [in]long sqlType,
+                                       [in]long scale)
+        raises (SQLException);
+};
+
+
+}; }; }; };
+
+/*===========================================================================
+===========================================================================*/
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
-- 
cgit v1.2.3