From 267c6f2ac71f92999e969232431ba04678e7437e Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 15 Apr 2024 07:54:39 +0200 Subject: Adding upstream version 4:24.2.0. Signed-off-by: Daniel Baumann --- sd/source/ui/view/drviewse.cxx | 1719 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1719 insertions(+) create mode 100644 sd/source/ui/view/drviewse.cxx (limited to 'sd/source/ui/view/drviewse.cxx') diff --git a/sd/source/ui/view/drviewse.cxx b/sd/source/ui/view/drviewse.cxx new file mode 100644 index 0000000000..0b293773b0 --- /dev/null +++ b/sd/source/ui/view/drviewse.cxx @@ -0,0 +1,1719 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +using namespace ::com::sun::star; +using namespace ::com::sun::star::uno; +using namespace ::com::sun::star::presentation; +using namespace ::com::sun::star::beans; + +namespace sd { + +// Permanent Functions + +static void ImpAddPrintableCharactersToTextEdit(SfxRequest const & rReq, ::sd::View* pView) +{ + // evtl. feed characters to activated textedit + const SfxItemSet* pSet = rReq.GetArgs(); + + if(!pSet) + return; + + OUString aInputString; + + if(SfxItemState::SET == pSet->GetItemState(SID_ATTR_CHAR)) + aInputString = pSet->Get(SID_ATTR_CHAR).GetValue(); + + if(aInputString.isEmpty()) + return; + + OutlinerView* pOLV = pView->GetTextEditOutlinerView(); + + if(pOLV) + { + for(sal_Int32 a(0); a < aInputString.getLength(); a++) + { + vcl::KeyCode aKeyCode; + // tdf#38669 - create the key event using a Unicode character + KeyEvent aKeyEvent(aInputString[a], aKeyCode); + + // add actual character + pOLV->PostKeyEvent(aKeyEvent); + } + } +} + +void DrawViewShell::FuPermanent(SfxRequest& rReq) +{ + // We do not execute a thing during a native slide show + + if (SlideShow::IsRunning(GetViewShellBase())) + return; + + sal_uInt16 nSId = rReq.GetSlot(); + + if( HasCurrentFunction() && + ( nSId == SID_TEXTEDIT || nSId == SID_ATTR_CHAR || nSId == SID_TEXT_FITTOSIZE || + nSId == SID_ATTR_CHAR_VERTICAL || nSId == SID_TEXT_FITTOSIZE_VERTICAL ) ) + { + rtl::Reference xFunc( GetCurrentFunction() ); + + FuText* pFuText = dynamic_cast< FuText* >( xFunc.get() ); + + if( pFuText ) + { + pFuText->SetPermanent(true); + xFunc->ReceiveRequest( rReq ); + + Invalidate(); + + // evtl. feed characters to activated textedit + if(SID_ATTR_CHAR == nSId && GetView() && GetView()->IsTextEdit()) + ImpAddPrintableCharactersToTextEdit(rReq, GetView()); + + rReq.Done(); + return; + } + } + + CheckLineTo (rReq); + sal_uInt16 nOldSId = 0; + bool bPermanent = false; + + if( !mpDrawView ) + return; + + if(HasCurrentFunction()) + { + if( (nSId == SID_FORMATPAINTBRUSH) && (GetCurrentFunction()->GetSlotID() == SID_TEXTEDIT) ) + { + // save text edit mode for format paintbrush! + SetOldFunction( GetCurrentFunction() ); + } + else + { + if(GetOldFunction() == GetCurrentFunction()) + { + SetOldFunction(nullptr); + } + } + + if ( nSId != SID_TEXTEDIT && nSId != SID_ATTR_CHAR && nSId != SID_TEXT_FITTOSIZE && + nSId != SID_ATTR_CHAR_VERTICAL && nSId != SID_TEXT_FITTOSIZE_VERTICAL && + nSId != SID_FORMATPAINTBRUSH && + mpDrawView->IsTextEdit() ) + { + mpDrawView->SdrEndTextEdit(); + } + + if( HasCurrentFunction() ) + { + nOldSId = GetCurrentFunction()->GetSlotID(); + + if (nOldSId == nSId || + ((nOldSId == SID_TEXTEDIT || nOldSId == SID_ATTR_CHAR || nOldSId == SID_TEXT_FITTOSIZE || + nOldSId == SID_ATTR_CHAR_VERTICAL || nOldSId == SID_TEXT_FITTOSIZE_VERTICAL) && + (nSId == SID_TEXTEDIT || nSId == SID_ATTR_CHAR || nSId == SID_TEXT_FITTOSIZE || + nSId == SID_ATTR_CHAR_VERTICAL || nSId == SID_TEXT_FITTOSIZE_VERTICAL ))) + { + bPermanent = true; + } + + GetCurrentFunction()->Deactivate(); + } + + SetCurrentFunction(nullptr); + + SfxBindings& rBind = GetViewFrame()->GetBindings(); + rBind.Invalidate(nOldSId); + rBind.Update(nOldSId); + } + + // for LibreOfficeKit - choosing a shape should construct it directly + bool bCreateDirectly = false; + + switch ( nSId ) + { + case SID_TEXTEDIT: // BASIC ??? + case SID_ATTR_CHAR: + case SID_ATTR_CHAR_VERTICAL: + case SID_TEXT_FITTOSIZE: + case SID_TEXT_FITTOSIZE_VERTICAL: + { + SetCurrentFunction( FuText::Create(this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq) ); + GetCurrentFunction()->DoExecute(rReq); + + SfxBindings& rBindings = GetViewFrame()->GetBindings(); + rBindings.Invalidate( SID_ATTR_CHAR ); + rBindings.Invalidate( SID_ATTR_CHAR_VERTICAL ); + rBindings.Invalidate( SID_TEXT_FITTOSIZE ); + rBindings.Invalidate( SID_TEXT_FITTOSIZE_VERTICAL ); + + // evtl. feed characters to activated textedit + if(SID_ATTR_CHAR == nSId && GetView() && GetView()->IsTextEdit()) + ImpAddPrintableCharactersToTextEdit(rReq, GetView()); + + rReq.Done(); + + const SfxItemSet* pArgs = rReq.GetArgs(); + if (pArgs && pArgs->HasItem(FN_PARAM_1)) + bCreateDirectly = static_cast(pArgs->Get(FN_PARAM_1)).GetValue(); + } + break; + + case SID_FM_CREATE_CONTROL: + { + SetCurrentFunction( FuConstructUnoControl::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent ) ); + rReq.Done(); + } + break; + + case SID_FM_CREATE_FIELDCONTROL: + { + const SfxUnoAnyItem* pDescriptorItem = rReq.GetArg(SID_FM_DATACCESS_DESCRIPTOR); + DBG_ASSERT( pDescriptorItem, "DrawViewShell::FuPermanent(SID_FM_CREATE_FIELDCONTROL): invalid request args!" ); + + if(pDescriptorItem) + { + // get the form view + FmFormView* pFormView = mpDrawView.get(); + SdrPageView* pPageView = pFormView ? pFormView->GetSdrPageView() : nullptr; + + if(pPageView) + { + svx::ODataAccessDescriptor aDescriptor(pDescriptorItem->GetValue()); + rtl::Reference pNewDBField = pFormView->CreateFieldControl(aDescriptor); + + if(pNewDBField) + { + ::tools::Rectangle aVisArea = GetActiveWindow()->PixelToLogic(::tools::Rectangle(Point(0,0), GetActiveWindow()->GetOutputSizePixel())); + Point aObjPos(aVisArea.Center()); + Size aObjSize(pNewDBField->GetLogicRect().GetSize()); + aObjPos.AdjustX( -(aObjSize.Width() / 2) ); + aObjPos.AdjustY( -(aObjSize.Height() / 2) ); + ::tools::Rectangle aNewObjectRectangle(aObjPos, aObjSize); + + pNewDBField->SetLogicRect(aNewObjectRectangle); + + GetView()->InsertObjectAtView(pNewDBField.get(), *pPageView); + } + } + } + rReq.Done(); + } + break; + + case SID_OBJECT_SELECT: + case SID_OBJECT_ROTATE: + case SID_OBJECT_MIRROR: + case SID_OBJECT_CROP: + case SID_OBJECT_TRANSPARENCE: + case SID_OBJECT_GRADIENT: + case SID_OBJECT_SHEAR: + case SID_OBJECT_CROOK_ROTATE: + case SID_OBJECT_CROOK_SLANT: + case SID_OBJECT_CROOK_STRETCH: + case SID_CONVERT_TO_3D_LATHE: + { + sal_uInt16 nSlotId = rReq.GetSlot(); + + // toggle function + if( nOldSId == nSlotId ) + { + nSlotId = SID_OBJECT_SELECT; + rReq.SetSlot( nSlotId ); + } + + if (nSlotId == SID_OBJECT_CROOK_ROTATE || + nSlotId == SID_OBJECT_CROOK_SLANT || + nSlotId == SID_OBJECT_CROOK_STRETCH) + { + if ( mpDrawView->GetMarkedObjectList().GetMarkCount() > 0 && + !mpDrawView->IsCrookAllowed( mpDrawView->IsCrookNoContortion() ) ) + { + if ( mpDrawView->IsPresObjSelected() ) + { + std::unique_ptr xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + std::unique_ptr xQueryBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Question, VclButtonsType::YesNo, + SdResId(STR_ASK_FOR_CONVERT_TO_BEZIER))); + if (xQueryBox->run() == RET_YES ) + { + // implicit transformation into bezier + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->ConvertMarkedToPathObj(false); + } + } + } + } + else if (nSlotId == SID_OBJECT_SHEAR) + { + size_t i = 0; + const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList(); + const size_t nMarkCnt = rMarkList.GetMarkCount(); + bool b3DObjMarked = false; + + while (i < nMarkCnt && !b3DObjMarked) + { + if (DynCastE3dObject( rMarkList.GetMark(i)->GetMarkedSdrObj() )) + { + b3DObjMarked = true; + } + else + { + i++; + } + } + + if ( nMarkCnt > 0 && !b3DObjMarked && + (!mpDrawView->IsShearAllowed() || !mpDrawView->IsDistortAllowed()) ) + { + if ( mpDrawView->IsPresObjSelected() ) + { + std::unique_ptr xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + std::unique_ptr xQueryBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Question, VclButtonsType::YesNo, + SdResId(STR_ASK_FOR_CONVERT_TO_BEZIER))); + if (xQueryBox->run() == RET_YES) + { + // implicit transformation into bezier + weld::WaitObject aWait(GetFrameWeld()); + mpDrawView->ConvertMarkedToPathObj(false); + } + } + } + } + + SetCurrentFunction( FuSelection::Create(this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq) ); + rReq.Done(); + Invalidate( SID_OBJECT_SELECT ); + } + break; + + case SID_DRAW_LINE: + case SID_DRAW_XLINE: + case SID_DRAW_MEASURELINE: + case SID_LINE_ARROW_START: + case SID_LINE_ARROW_END: + case SID_LINE_ARROWS: + case SID_LINE_ARROW_CIRCLE: + case SID_LINE_CIRCLE_ARROW: + case SID_LINE_ARROW_SQUARE: + case SID_LINE_SQUARE_ARROW: + + case SID_DRAW_RECT: + case SID_DRAW_RECT_NOFILL: + case SID_DRAW_RECT_ROUND: + case SID_DRAW_RECT_ROUND_NOFILL: + case SID_DRAW_SQUARE: + case SID_DRAW_SQUARE_NOFILL: + case SID_DRAW_SQUARE_ROUND: + case SID_DRAW_SQUARE_ROUND_NOFILL: + case SID_DRAW_ELLIPSE: + case SID_DRAW_ELLIPSE_NOFILL: + case SID_DRAW_CIRCLE: + case SID_DRAW_CIRCLE_NOFILL: + case SID_DRAW_CAPTION: + case SID_DRAW_CAPTION_VERTICAL: + case SID_TOOL_CONNECTOR: + case SID_CONNECTOR_ARROW_START: + case SID_CONNECTOR_ARROW_END: + case SID_CONNECTOR_ARROWS: + case SID_CONNECTOR_CIRCLE_START: + case SID_CONNECTOR_CIRCLE_END: + case SID_CONNECTOR_CIRCLES: + case SID_CONNECTOR_LINE: + case SID_CONNECTOR_LINE_ARROW_START: + case SID_CONNECTOR_LINE_ARROW_END: + case SID_CONNECTOR_LINE_ARROWS: + case SID_CONNECTOR_LINE_CIRCLE_START: + case SID_CONNECTOR_LINE_CIRCLE_END: + case SID_CONNECTOR_LINE_CIRCLES: + case SID_CONNECTOR_CURVE: + case SID_CONNECTOR_CURVE_ARROW_START: + case SID_CONNECTOR_CURVE_ARROW_END: + case SID_CONNECTOR_CURVE_ARROWS: + case SID_CONNECTOR_CURVE_CIRCLE_START: + case SID_CONNECTOR_CURVE_CIRCLE_END: + case SID_CONNECTOR_CURVE_CIRCLES: + case SID_CONNECTOR_LINES: + case SID_CONNECTOR_LINES_ARROW_START: + case SID_CONNECTOR_LINES_ARROW_END: + case SID_CONNECTOR_LINES_ARROWS: + case SID_CONNECTOR_LINES_CIRCLE_START: + case SID_CONNECTOR_LINES_CIRCLE_END: + case SID_CONNECTOR_LINES_CIRCLES: + case SID_INSERT_SIGNATURELINE: + { + bCreateDirectly = comphelper::LibreOfficeKit::isActive(); + SetCurrentFunction( FuConstructRectangle::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent ) ); + rReq.Done(); + } + break; + case SID_DRAW_POLYGON: + case SID_DRAW_POLYGON_NOFILL: + case SID_DRAW_XPOLYGON: + case SID_DRAW_XPOLYGON_NOFILL: + case SID_DRAW_FREELINE: + case SID_DRAW_FREELINE_NOFILL: + case SID_DRAW_BEZIER_FILL: // BASIC + case SID_DRAW_BEZIER_NOFILL: // BASIC + { + SetCurrentFunction( FuConstructBezierPolygon::Create(this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent) ); + rReq.Done(); + } + break; + + case SID_GLUE_EDITMODE: + { + if (nOldSId != SID_GLUE_EDITMODE) + { + SetCurrentFunction( FuEditGluePoints::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent ) ); + } + else + { + GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON); + } + + rReq.Done(); + } + break; + + case SID_DRAW_ARC: + case SID_DRAW_CIRCLEARC: + case SID_DRAW_PIE: + case SID_DRAW_PIE_NOFILL: + case SID_DRAW_CIRCLEPIE: + case SID_DRAW_CIRCLEPIE_NOFILL: + case SID_DRAW_ELLIPSECUT: + case SID_DRAW_ELLIPSECUT_NOFILL: + case SID_DRAW_CIRCLECUT: + case SID_DRAW_CIRCLECUT_NOFILL: + { + SetCurrentFunction( FuConstructArc::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent) ); + rReq.Done(); + } + break; + + case SID_3D_CUBE: + case SID_3D_SHELL: + case SID_3D_SPHERE: + case SID_3D_TORUS: + case SID_3D_HALF_SPHERE: + case SID_3D_CYLINDER: + case SID_3D_CONE: + case SID_3D_PYRAMID: + { + SetCurrentFunction( FuConstruct3dObject::Create(this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent ) ); + rReq.Done(); + } + break; + + case SID_DRAWTBX_CS_BASIC : + case SID_DRAWTBX_CS_SYMBOL : + case SID_DRAWTBX_CS_ARROW : + case SID_DRAWTBX_CS_FLOWCHART : + case SID_DRAWTBX_CS_CALLOUT : + case SID_DRAWTBX_CS_STAR : + case SID_DRAW_CS_ID : + { + SetCurrentFunction( FuConstructCustomShape::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq, bPermanent ) ); + rReq.Done(); + + bCreateDirectly = comphelper::LibreOfficeKit::isActive(); + const SfxItemSet* pArgs = rReq.GetArgs(); + if (pArgs && pArgs->HasItem(FN_PARAM_1)) + { + bCreateDirectly = static_cast(pArgs->Get(FN_PARAM_1)).GetValue(); + } + + if ( nSId != SID_DRAW_CS_ID ) + { + SfxBindings& rBind = GetViewFrame()->GetBindings(); + rBind.Invalidate( nSId ); + rBind.Update( nSId ); + } + } + break; + + case SID_FORMATPAINTBRUSH: + { + SetCurrentFunction( FuFormatPaintBrush::Create( this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + rReq.Done(); + SfxBindings& rBind = GetViewFrame()->GetBindings(); + rBind.Invalidate( nSId ); + rBind.Update( nSId ); + break; + } + + case SID_ZOOM_MODE: + case SID_ZOOM_PANNING: + { + if (nOldSId != nSId) + { + mbZoomOnPage = false; + SetCurrentFunction( FuZoom::Create(this, GetActiveWindow(), mpDrawView.get(), GetDoc(), rReq ) ); + } + else + { + GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON); + } + rReq.Done(); + } + break; + + default: + break; + } + + if(HasOldFunction()) + { + sal_uInt16 nSlotId = GetOldFunction()->GetSlotID(); + + GetOldFunction()->Deactivate(); + SetOldFunction(nullptr); + + SfxBindings& rBind = GetViewFrame()->GetBindings(); + rBind.Invalidate( nSlotId ); + rBind.Update( nSlotId ); + } + + if(HasCurrentFunction()) + { + GetCurrentFunction()->Activate(); + SetOldFunction( GetCurrentFunction() ); + } + + // invalidate shell, is faster than every individually (says MI) + // now explicit the last slot incl. Update() + Invalidate(); + + // CTRL-SID_OBJECT_SELECT -> select first draw object if none is selected yet + if(SID_OBJECT_SELECT == nSId && HasCurrentFunction() && (rReq.GetModifier() & KEY_MOD1)) + { + if(!GetView()->AreObjectsMarked()) + { + // select first object + GetView()->UnmarkAllObj(); + GetView()->MarkNextObj(true); + + // ...and make it visible + if(GetView()->AreObjectsMarked()) + GetView()->MakeVisible(GetView()->GetAllMarkedRect(), *GetActiveWindow()); + } + } + + // with qualifier construct directly + if(!(HasCurrentFunction() && ((rReq.GetModifier() & KEY_MOD1) || bCreateDirectly))) + return; + + // disable interactive drawing for LOK + if (bCreateDirectly) + GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON); + + // get SdOptions + SdOptions* pOptions = SD_MOD()->GetSdOptions(GetDoc()->GetDocumentType()); + sal_uInt32 nDefaultObjectSizeWidth(pOptions->GetDefaultObjectSizeWidth()); + sal_uInt32 nDefaultObjectSizeHeight(pOptions->GetDefaultObjectSizeHeight()); + + // calc position and size + ::tools::Rectangle aVisArea = GetActiveWindow()->PixelToLogic(::tools::Rectangle(Point(0,0), GetActiveWindow()->GetOutputSizePixel())); + if (comphelper::LibreOfficeKit::isActive()) + { + // aVisArea is nonsensical in the LOK case, use the slide size + aVisArea = ::tools::Rectangle(Point(), getCurrentPage()->GetSize()); + } + + Point aPagePos = aVisArea.Center(); + aPagePos.AdjustX( -sal_Int32(nDefaultObjectSizeWidth / 2) ); + aPagePos.AdjustY( -sal_Int32(nDefaultObjectSizeHeight / 2) ); + ::tools::Rectangle aNewObjectRectangle(aPagePos, Size(nDefaultObjectSizeWidth, nDefaultObjectSizeHeight)); + SdrPageView* pPageView = mpDrawView->GetSdrPageView(); + + if(!pPageView) + return; + + // create the default object + rtl::Reference pObj = GetCurrentFunction()->CreateDefaultObject(nSId, aNewObjectRectangle); + + if(!pObj) + return; + + auto pObjTmp = pObj.get(); + // insert into page + GetView()->InsertObjectAtView(pObj.get(), *pPageView); + + // Now that pFuActual has done what it was created for we + // can switch on the edit mode for callout objects. + switch (nSId) + { + case SID_DRAW_CAPTION: + case SID_DRAW_CAPTION_VERTICAL: + { + // Make FuText the current function. + SfxUInt16Item aItem (SID_TEXTEDIT, 1); + GetViewFrame()->GetDispatcher()-> + ExecuteList(SID_TEXTEDIT, SfxCallMode::SYNCHRON | + SfxCallMode::RECORD, { &aItem }); + // Put text object into edit mode. + GetView()->SdrBeginTextEdit(static_cast(pObjTmp), pPageView); + break; + } + } +} + +void DrawViewShell::FuDeleteSelectedObjects() +{ + if( !mpDrawView ) + return; + + bool bConsumed = false; + + //if any placeholders are selected + if (mpDrawView->IsPresObjSelected(false)) + { + //If there are placeholders in the list which can be toggled + //off in edit->master->master elements then do that here, + std::vector aPresMarksToRemove; + const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList(); + for (size_t i=0; i < rMarkList.GetMarkCount(); ++i) + { + SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj(); + SdPage* pPage = static_cast(pObj->getSdrPageFromSdrObject()); + PresObjKind eKind = pPage->GetPresObjKind(pObj); + if (eKind == PresObjKind::Footer || eKind == PresObjKind::Header || + eKind == PresObjKind::DateTime || eKind == PresObjKind::SlideNumber) + { + aPresMarksToRemove.push_back(pObj); + } + } + + for (SdrObject* pObj : aPresMarksToRemove) + { + //Unmark object + mpDrawView->MarkObj(pObj, mpDrawView->GetSdrPageView(), true); + SdPage* pPage = static_cast(pObj->getSdrPageFromSdrObject()); + //remove placeholder from master page + pPage->DestroyDefaultPresObj(pPage->GetPresObjKind(pObj)); + } + + bConsumed = true; + } + + // placeholders which cannot be deleted selected + if (mpDrawView->IsPresObjSelected(false, true, false, true)) + { + std::unique_ptr xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + bConsumed = true; + } + + if (bConsumed) + return; + + vcl::KeyCode aKCode(KEY_DELETE); + KeyEvent aKEvt( 0, aKCode); + + bConsumed = mpDrawView->getSmartTags().KeyInput( aKEvt ); + + if (!bConsumed && HasCurrentFunction()) + bConsumed = GetCurrentFunction()->KeyInput(aKEvt); + + if (!bConsumed) + mpDrawView->DeleteMarked(); +} + +void DrawViewShell::FuSupport(SfxRequest& rReq) +{ + if( rReq.GetSlot() == SID_STYLE_FAMILY && rReq.GetArgs()) + GetDocSh()->SetStyleFamily(static_cast(rReq.GetArgs()->Get( SID_STYLE_FAMILY ).GetValue())); + + // We do not execute a thing during a native slide show + if(SlideShow::IsRunning(GetViewShellBase()) && + (rReq.GetSlot() != SID_PRESENTATION_END && + rReq.GetSlot() != SID_SIZE_PAGE)) + return; + + CheckLineTo (rReq); + + if( !mpDrawView ) + return; + + sal_uInt16 nSId = rReq.GetSlot(); + + switch ( nSId ) + { + case SID_CLEAR_UNDO_STACK: + { + GetDocSh()->ClearUndoBuffer(); + rReq.Ignore (); + } + break; + + case SID_PRESENTATION: + case SID_PRESENTATION_CURRENT_SLIDE: + case SID_REHEARSE_TIMINGS: + { + slideshowhelp::ShowSlideShow(rReq, *GetDoc()); + rReq.Ignore (); + } + break; + + case SID_PRESENTATION_END: + { + StopSlideShow(); + + rReq.Ignore (); + } + break; + + case SID_BEZIER_EDIT: + { + mpDrawView->SetFrameDragSingles(!mpDrawView->IsFrameDragSingles()); + + /****************************************************************** + * turn ObjectBar on + ******************************************************************/ + if( dynamic_cast< FuSelection* >( GetCurrentFunction().get() ) || dynamic_cast< FuConstructBezierPolygon* >( GetCurrentFunction().get() ) ) + { + // Tell the tool bar manager about the context change. + GetViewShellBase().GetToolBarManager()->SelectionHasChanged(*this,*mpDrawView); + } + + Invalidate(SID_BEZIER_EDIT); + rReq.Ignore(); + } + break; + + case SID_OBJECT_CLOSE: + { + const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList(); + if ( rMarkList.GetMark(0) && !mpDrawView->IsAction() ) + { + SdrPathObj* pPathObj = static_cast( rMarkList.GetMark(0)->GetMarkedSdrObj()); + const bool bUndo = mpDrawView->IsUndoEnabled(); + if( bUndo ) + mpDrawView->BegUndo(SdResId(STR_UNDO_BEZCLOSE)); + + mpDrawView->UnmarkAllPoints(); + + if( bUndo ) + mpDrawView->AddUndo(std::make_unique(*pPathObj)); + + pPathObj->ToggleClosed(); + + if( bUndo ) + mpDrawView->EndUndo(); + } + rReq.Done(); + } + break; + + case SID_CUT: + { + if ( mpDrawView->IsPresObjSelected(false, true, false, true) ) + { + std::unique_ptr xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + //tdf#126197: EndTextEdit in all views if current one is not in TextEdit + if ( !mpDrawView->IsTextEdit() ) + mpDrawView->EndTextEditAllViews(); + + if(HasCurrentFunction()) + { + GetCurrentFunction()->DoCut(); + } + else if(mpDrawView) + { + mpDrawView->DoCut(); + } + } + rReq.Ignore (); + } + break; + + case SID_COPY: + { + if ( mpDrawView->IsPresObjSelected(false, true, false, true) ) + { + std::unique_ptr xInfoBox(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Info, VclButtonsType::Ok, + SdResId(STR_ACTION_NOTPOSSIBLE))); + xInfoBox->run(); + } + else + { + if(HasCurrentFunction()) + { + GetCurrentFunction()->DoCopy(); + } + else if( mpDrawView ) + { + mpDrawView->DoCopy(); + } + } + rReq.Ignore (); + } + break; + + case SID_PASTE: + { + weld::WaitObject aWait(GetFrameWeld()); + + if(HasCurrentFunction()) + { + GetCurrentFunction()->DoPaste(); + } + else if(mpDrawView) + { + mpDrawView->DoPaste(); + } + + rReq.Ignore (); + } + break; + + case SID_UNICODE_NOTATION_TOGGLE: + { + if( mpDrawView->IsTextEdit() ) + { + OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView(); + if( pOLV ) + { + OUString sInput = pOLV->GetSurroundingText(); + ESelection aSel( pOLV->GetSelection() ); + if( aSel.nStartPos > aSel.nEndPos ) + aSel.nEndPos = aSel.nStartPos; + + //calculate a valid end-position by reading logical characters + sal_Int32 nUtf16Pos=0; + while( (nUtf16Pos < sInput.getLength()) && (nUtf16Pos < aSel.nEndPos) ) + { + sInput.iterateCodePoints(&nUtf16Pos); + //The mouse can set the cursor in the middle of a multi-unit character, + // so reset to the proper end of the logical characters + if( nUtf16Pos > aSel.nEndPos ) + aSel.nEndPos = nUtf16Pos; + } + + ToggleUnicodeCodepoint aToggle; + while( nUtf16Pos && aToggle.AllowMoreInput( sInput[nUtf16Pos-1]) ) + --nUtf16Pos; + OUString sReplacement = aToggle.ReplacementString(); + if( !sReplacement.isEmpty() ) + { + OUString sStringToReplace = aToggle.StringToReplace(); + mpDrawView->BegUndo(sStringToReplace +"->"+ sReplacement); + aSel.nStartPos = aSel.nEndPos - sStringToReplace.getLength(); + pOLV->SetSelection( aSel ); + pOLV->InsertText(sReplacement, true); + mpDrawView->EndUndo(); + } + } + } + } + break; + + case SID_PASTE_UNFORMATTED: + { + weld::WaitObject aWait(GetFrameWeld()); + + if(HasCurrentFunction()) + { + GetCurrentFunction()->DoPasteUnformatted(); + } + else if(mpDrawView) + { + TransferableDataHelper aDataHelper( TransferableDataHelper::CreateFromSystemClipboard( GetActiveWindow() ) ); + if (aDataHelper.GetTransferable().is()) + { + sal_Int8 nAction = DND_ACTION_COPY; + mpDrawView->InsertData( aDataHelper, + GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(), GetActiveWindow()->GetOutputSizePixel() ).Center() ), + nAction, false, SotClipboardFormatId::STRING); + } + } + + rReq.Ignore (); + } + break; + + case SID_CLIPBOARD_FORMAT_ITEMS: + { + weld::WaitObject aWait(GetFrameWeld()); + TransferableDataHelper aDataHelper( TransferableDataHelper::CreateFromSystemClipboard( GetActiveWindow() ) ); + const SfxItemSet* pReqArgs = rReq.GetArgs(); + SotClipboardFormatId nFormat = SotClipboardFormatId::NONE; + + if( pReqArgs ) + { + const SfxUInt32Item* pIsActive = rReq.GetArg(SID_CLIPBOARD_FORMAT_ITEMS); + nFormat = static_cast(pIsActive->GetValue()); + } + + if( nFormat != SotClipboardFormatId::NONE && aDataHelper.GetTransferable().is() ) + { + sal_Int8 nAction = DND_ACTION_COPY; + + if( !mpDrawView->InsertData( aDataHelper, + GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(), GetActiveWindow()->GetOutputSizePixel() ).Center() ), + nAction, false, nFormat ) ) + { + INetBookmark aINetBookmark( "", "" ); + + if( ( aDataHelper.HasFormat( SotClipboardFormatId::NETSCAPE_BOOKMARK ) && + aDataHelper.GetINetBookmark( SotClipboardFormatId::NETSCAPE_BOOKMARK, aINetBookmark ) ) || + ( aDataHelper.HasFormat( SotClipboardFormatId::FILEGRPDESCRIPTOR ) && + aDataHelper.GetINetBookmark( SotClipboardFormatId::FILEGRPDESCRIPTOR, aINetBookmark ) ) || + ( aDataHelper.HasFormat( SotClipboardFormatId::UNIFORMRESOURCELOCATOR ) && + aDataHelper.GetINetBookmark( SotClipboardFormatId::UNIFORMRESOURCELOCATOR, aINetBookmark ) ) ) + { + InsertURLField( aINetBookmark.GetURL(), aINetBookmark.GetDescription(), "" ); + } + } + } + } + break; + + case SID_DELETE: + { + if ( mpDrawView->IsTextEdit() ) + { + OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView(); + + if (pOLV) + { + vcl::KeyCode aKCode(KEY_DELETE); + KeyEvent aKEvt( 0, aKCode); + // We use SdrObjEditView to handle DEL for underflow handling + (void)mpDrawView->KeyInput(aKEvt, nullptr); + } + } + else + { + mpDrawView->EndTextEditAllViews(); + FuDeleteSelectedObjects(); + } + rReq.Ignore (); + } + break; + + case SID_NOTES_MODE: + case SID_SLIDE_MASTER_MODE: + case SID_NOTES_MASTER_MODE: + case SID_HANDOUT_MASTER_MODE: + + // AutoLayouts have to be ready. + GetDoc()->StopWorkStartupDelay(); + [[fallthrough]]; + + case SID_DRAWINGMODE: + case SID_SLIDE_SORTER_MODE: + case SID_OUTLINE_MODE: + // Let the sub-shell manager handle the slot handling. + framework::FrameworkHelper::Instance(GetViewShellBase())->HandleModeChangeSlot( + nSId, + rReq); + rReq.Ignore (); + break; + + case SID_MASTERPAGE: // BASIC + { + if (comphelper::LibreOfficeKit::isActive()) + GetViewShell()->libreOfficeKitViewCallback(LOK_CALLBACK_STATE_CHANGED, + ".uno:SlideMasterPage=true"_ostr); + + // AutoLayouts needs to be finished + GetDoc()->StopWorkStartupDelay(); + + const SfxItemSet* pReqArgs = rReq.GetArgs(); + + if ( pReqArgs ) + { + const SfxBoolItem* pIsActive = rReq.GetArg(SID_MASTERPAGE); + mbIsLayerModeActive = pIsActive->GetValue (); + } + + Broadcast ( + ViewShellHint(ViewShellHint::HINT_CHANGE_EDIT_MODE_START)); + + // turn on default layer of MasterPage + mpDrawView->SetActiveLayer(sUNO_LayerName_background_objects); + + ChangeEditMode(EditMode::MasterPage, mbIsLayerModeActive); + + if(HasCurrentFunction(SID_BEZIER_EDIT)) + GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON); + + Broadcast ( + ViewShellHint(ViewShellHint::HINT_CHANGE_EDIT_MODE_END)); + + InvalidateWindows(); + Invalidate(); + + rReq.Done(); + } + break; + + case SID_CLOSE_MASTER_VIEW: + { + // Notify of disabling master view, which is enabled in DrawViewShell::ChangeEditMode. + if (comphelper::LibreOfficeKit::isActive()) + GetViewShell()->libreOfficeKitViewCallback(LOK_CALLBACK_STATE_CHANGED, + ".uno:SlideMasterPage=false"_ostr); + + Broadcast ( + ViewShellHint(ViewShellHint::HINT_CHANGE_EDIT_MODE_START)); + + // Switch page back to the first one. Not doing so leads to a + // crash. This seems to be some bug in the edit mode switching + // and page switching methods. + SwitchPage (0); + ChangeEditMode(EditMode::Page, IsLayerModeActive()); + Broadcast ( + ViewShellHint(ViewShellHint::HINT_CHANGE_EDIT_MODE_END)); + + if(HasCurrentFunction(SID_BEZIER_EDIT)) + { + GetViewFrame()->GetDispatcher()->Execute( + SID_OBJECT_SELECT, + SfxCallMode::ASYNCHRON); + } + + rReq.Done(); + } + break; + + case SID_RULER: + { + const SfxItemSet* pReqArgs = rReq.GetArgs(); + + // Remember old ruler state + bool bOldHasRuler(HasRuler()); + + if ( pReqArgs ) + { + const SfxBoolItem* pIsActive = rReq.GetArg(SID_RULER); + SetRuler (pIsActive->GetValue ()); + } + else SetRuler (!HasRuler()); + + // Did ruler state change? Tell that to SdOptions, too. + bool bHasRuler(HasRuler()); + + if(bOldHasRuler != bHasRuler) + { + SdOptions* pOptions = SD_MOD()->GetSdOptions(GetDoc()->GetDocumentType()); + + if(pOptions && pOptions->IsRulerVisible() != bHasRuler) + { + pOptions->SetRulerVisible(bHasRuler); + } + } + + Invalidate (SID_RULER); + Resize(); + rReq.Done (); + } + break; + + case SID_SIZE_PAGE: + case SID_SIZE_PAGE_WIDTH: // BASIC + { + mbZoomOnPage = ( rReq.GetSlot() == SID_SIZE_PAGE ); + + SdrPageView* pPageView = mpDrawView->GetSdrPageView(); + + if ( pPageView ) + { + Point aPagePos(0, 0); // = pPageView->GetOffset(); + Size aPageSize = pPageView->GetPage()->GetSize(); + + aPagePos.AdjustX(aPageSize.Width() / 2 ); + aPageSize.setWidth( static_cast<::tools::Long>(aPageSize.Width() * 1.03) ); + + if( rReq.GetSlot() == SID_SIZE_PAGE ) + { + aPagePos.AdjustY(aPageSize.Height() / 2 ); + aPageSize.setHeight( static_cast<::tools::Long>(aPageSize.Height() * 1.03) ); + aPagePos.AdjustY( -(aPageSize.Height() / 2) ); + } + else + { + Point aPt = GetActiveWindow()->PixelToLogic( Point( 0, GetActiveWindow()->GetSizePixel().Height() / 2 ) ); + aPagePos.AdjustY(aPt.Y() ); + aPageSize.setHeight( 2 ); + } + + aPagePos.AdjustX( -(aPageSize.Width() / 2) ); + + SetZoomRect( ::tools::Rectangle( aPagePos, aPageSize ) ); + + ::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0), + GetActiveWindow()->GetOutputSizePixel()) ); + mpZoomList->InsertZoomRect(aVisAreaWin); + } + Invalidate( SID_ZOOM_IN ); + Invalidate( SID_ZOOM_OUT ); + Invalidate( SID_ZOOM_PANNING ); + rReq.Done (); + } + break; + + case SID_SIZE_REAL: // BASIC + { + mbZoomOnPage = false; + SetZoom( 100 ); + ::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0), + GetActiveWindow()->GetOutputSizePixel()) ); + mpZoomList->InsertZoomRect(aVisAreaWin); + Invalidate( SID_ZOOM_IN ); + Invalidate( SID_ZOOM_OUT ); + Invalidate( SID_ZOOM_PANNING ); + rReq.Done (); + } + break; + + case SID_ZOOM_OUT: // BASIC + { + const sal_uInt16 nOldZoom = GetActiveWindow()->GetZoom(); + const sal_uInt16 nNewZoom = basegfx::zoomtools::zoomOut(nOldZoom); + SetZoom(nNewZoom); + + mbZoomOnPage = false; + ::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0), + GetActiveWindow()->GetOutputSizePixel()) ); + mpZoomList->InsertZoomRect(aVisAreaWin); + Invalidate( SID_ZOOM_IN ); + Invalidate( SID_ZOOM_OUT ); + Invalidate( SID_ZOOM_PANNING ); + rReq.Done (); + } + break; + + case SID_ZOOM_IN: + { + const sal_uInt16 nOldZoom = GetActiveWindow()->GetZoom(); + const sal_uInt16 nNewZoom = basegfx::zoomtools::zoomIn(nOldZoom); + SetZoom(nNewZoom); + + mbZoomOnPage = false; + ::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0), + GetActiveWindow()->GetOutputSizePixel()) ); + mpZoomList->InsertZoomRect(aVisAreaWin); + Invalidate( SID_ZOOM_IN ); + Invalidate(SID_ZOOM_OUT); + Invalidate( SID_ZOOM_PANNING ); + rReq.Done (); + } + break; + + case SID_SIZE_VISAREA: + { + ::tools::Rectangle aVisArea = mpFrameView->GetVisArea(); + Size aVisAreaSize = aVisArea.GetSize(); + + if (!aVisAreaSize.IsEmpty()) + { + mbZoomOnPage = false; + SetZoomRect(aVisArea); + Invalidate( SID_ZOOM_IN ); + Invalidate( SID_ZOOM_OUT ); + Invalidate( SID_ZOOM_PANNING ); + } + rReq.Done (); + } + break; + + // name confusion: SID_SIZE_OPTIMAL -> Zoom onto selected objects + // --> Is offered as object zoom in program + case SID_SIZE_OPTIMAL: // BASIC + { + mbZoomOnPage = false; + if ( mpDrawView->AreObjectsMarked() ) + { + maMarkRect = mpDrawView->GetAllMarkedRect(); + ::tools::Long nW = static_cast<::tools::Long>(maMarkRect.GetWidth() * 1.03); + ::tools::Long nH = static_cast<::tools::Long>(maMarkRect.GetHeight() * 1.03); + Point aPos = maMarkRect.Center(); + aPos.AdjustX( -(nW / 2) ); + aPos.AdjustY( -(nH / 2) ); + if ( nW && nH ) + { + SetZoomRect(::tools::Rectangle(aPos, Size(nW, nH))); + + ::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0), + GetActiveWindow()->GetOutputSizePixel()) ); + mpZoomList->InsertZoomRect(aVisAreaWin); + } + } + Invalidate( SID_ZOOM_IN ); + Invalidate( SID_ZOOM_OUT ); + Invalidate( SID_ZOOM_PANNING ); + rReq.Done (); + } + break; + + // name confusion: SID_SIZE_ALL -> Zoom onto all objects + // --> Is offered as optimal in program + case SID_SIZE_ALL: // BASIC + { + mbZoomOnPage = false; + SdrPageView* pPageView = mpDrawView->GetSdrPageView(); + + if( pPageView ) + { + ::tools::Rectangle aBoundRect( pPageView->GetObjList()->GetAllObjBoundRect() ); + + ::tools::Long nW = static_cast<::tools::Long>(aBoundRect.GetWidth() * 1.03); + ::tools::Long nH = static_cast<::tools::Long>(aBoundRect.GetHeight() * 1.03); + Point aPos = aBoundRect.Center(); + aPos.AdjustX( -(nW / 2) ); + aPos.AdjustY( -(nH / 2) ); + if ( nW && nH ) + { + SetZoomRect( ::tools::Rectangle( aPos, Size( nW, nH ) ) ); + + ::tools::Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( ::tools::Rectangle( Point(0,0), + GetActiveWindow()->GetOutputSizePixel()) ); + mpZoomList->InsertZoomRect(aVisAreaWin); + } + + Invalidate( SID_ZOOM_IN ); + Invalidate( SID_ZOOM_OUT ); + Invalidate( SID_ZOOM_PANNING ); + } + rReq.Done (); + } + break; + + case SID_ZOOM_PREV: + { + if (mpDrawView->IsTextEdit()) + { + mpDrawView->SdrEndTextEdit(); + } + + if (mpZoomList->IsPreviousPossible()) + { + // set previous ZoomRect + SetZoomRect(mpZoomList->GetPreviousZoomRect()); + } + rReq.Done (); + } + break; + + case SID_ZOOM_NEXT: + { + if (mpDrawView->IsTextEdit()) + { + mpDrawView->SdrEndTextEdit(); + } + + if (mpZoomList->IsNextPossible()) + { + // set next ZoomRect + SetZoomRect(mpZoomList->GetNextZoomRect()); + } + rReq.Done (); + } + break; + + case SID_GLUE_INSERT_POINT: + case SID_GLUE_PERCENT: + case SID_GLUE_ESCDIR: + case SID_GLUE_ESCDIR_LEFT: + case SID_GLUE_ESCDIR_RIGHT: + case SID_GLUE_ESCDIR_TOP: + case SID_GLUE_ESCDIR_BOTTOM: + case SID_GLUE_HORZALIGN_CENTER: + case SID_GLUE_HORZALIGN_LEFT: + case SID_GLUE_HORZALIGN_RIGHT: + case SID_GLUE_VERTALIGN_CENTER: + case SID_GLUE_VERTALIGN_TOP: + case SID_GLUE_VERTALIGN_BOTTOM: + { + rtl::Reference xFunc( GetCurrentFunction() ); + FuEditGluePoints* pFunc = dynamic_cast< FuEditGluePoints* >( xFunc.get() ); + + if(pFunc) + pFunc->ReceiveRequest(rReq); + + rReq.Done(); + } + break; + + case SID_AUTOSPELL_CHECK: + { + bool bOnlineSpell; + const SfxPoolItem* pItem; + + if (rReq.GetArgs()->HasItem(FN_PARAM_1, &pItem)) + bOnlineSpell = static_cast(pItem)->GetValue(); + else // Toggle + bOnlineSpell = !GetDoc()->GetOnlineSpell(); + + GetDoc()->SetOnlineSpell(bOnlineSpell); + + ::Outliner* pOL = mpDrawView->GetTextEditOutliner(); + + if (pOL) + { + EEControlBits nCntrl = pOL->GetControlWord(); + + if (bOnlineSpell) + nCntrl |= EEControlBits::ONLINESPELLING; + else + nCntrl &= ~EEControlBits::ONLINESPELLING; + + pOL->SetControlWord(nCntrl); + } + + GetActiveWindow()->Invalidate(); + rReq.Done (); + } + break; + + case SID_TRANSLITERATE_SENTENCE_CASE: + case SID_TRANSLITERATE_TITLE_CASE: + case SID_TRANSLITERATE_TOGGLE_CASE: + case SID_TRANSLITERATE_UPPER: + case SID_TRANSLITERATE_LOWER: + case SID_TRANSLITERATE_HALFWIDTH: + case SID_TRANSLITERATE_FULLWIDTH: + case SID_TRANSLITERATE_HIRAGANA: + case SID_TRANSLITERATE_KATAKANA: + { + OutlinerView* pOLV = GetView()->GetTextEditOutlinerView(); + if( pOLV ) + { + TransliterationFlags nType = TransliterationFlags::NONE; + + switch( nSId ) + { + case SID_TRANSLITERATE_SENTENCE_CASE: + nType = TransliterationFlags::SENTENCE_CASE; + break; + case SID_TRANSLITERATE_TITLE_CASE: + nType = TransliterationFlags::TITLE_CASE; + break; + case SID_TRANSLITERATE_TOGGLE_CASE: + nType = TransliterationFlags::TOGGLE_CASE; + break; + case SID_TRANSLITERATE_UPPER: + nType = TransliterationFlags::LOWERCASE_UPPERCASE; + break; + case SID_TRANSLITERATE_LOWER: + nType = TransliterationFlags::UPPERCASE_LOWERCASE; + break; + case SID_TRANSLITERATE_HALFWIDTH: + nType = TransliterationFlags::FULLWIDTH_HALFWIDTH; + break; + case SID_TRANSLITERATE_FULLWIDTH: + nType = TransliterationFlags::HALFWIDTH_FULLWIDTH; + break; + case SID_TRANSLITERATE_HIRAGANA: + nType = TransliterationFlags::KATAKANA_HIRAGANA; + break; + case SID_TRANSLITERATE_KATAKANA: + nType = TransliterationFlags::HIRAGANA_KATAKANA; + break; + } + + pOLV->TransliterateText( nType ); + } + + rReq.Done(); + } + break; + + // #UndoRedo# + case SID_UNDO : + { + // moved implementation to BaseClass + ImpSidUndo(rReq); + } + break; + case SID_REDO : + { + // moved implementation to BaseClass + ImpSidRedo(rReq); + } + break; + + default: + break; + } +} + +void DrawViewShell::FuSupportRotate(SfxRequest const &rReq) +{ + if( rReq.GetSlot() != SID_TRANSLITERATE_ROTATE_CASE ) + return; + + ::sd::View* pView = GetView(); + + if (!pView) + return; + + OutlinerView* pOLV = pView->GetTextEditOutlinerView(); + + if (!pOLV) + return; + + pOLV->TransliterateText( m_aRotateCase.getNextMode() ); +} + +void DrawViewShell::InsertURLField(const OUString& rURL, const OUString& rText, + const OUString& rTarget) +{ + OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView(); + + if (pOLV) + { + ESelection aSel( pOLV->GetSelection() ); + SvxFieldItem aURLItem( SvxURLField( rURL, rText, SvxURLFormat::Repr ), EE_FEATURE_FIELD ); + pOLV->InsertField( aURLItem ); + if ( aSel.nStartPos <= aSel.nEndPos ) + aSel.nEndPos = aSel.nStartPos + 1; + else + aSel.nStartPos = aSel.nEndPos + 1; + pOLV->SetSelection( aSel ); + } + else + { + Outliner* pOutl = GetDoc()->GetInternalOutliner(); + pOutl->Init( OutlinerMode::TextObject ); + OutlinerMode nOutlMode = pOutl->GetOutlinerMode(); + + SvxURLField aURLField(rURL, rText, SvxURLFormat::Repr); + aURLField.SetTargetFrame(rTarget); + SvxFieldItem aURLItem(aURLField, EE_FEATURE_FIELD); + pOutl->QuickInsertField( aURLItem, ESelection() ); + std::optional pOutlParaObject = pOutl->CreateParaObject(); + + rtl::Reference pRectObj = new SdrRectObj( + GetView()->getSdrModelFromSdrView(), + SdrObjKind::Text); + + pOutl->UpdateFields(); + pOutl->SetUpdateLayout( true ); + Size aSize(pOutl->CalcTextSize()); + pOutl->SetUpdateLayout( false ); + + Point aPos; + ::tools::Rectangle aRect(aPos, GetActiveWindow()->GetOutputSizePixel() ); + aPos = aRect.Center(); + aPos = GetActiveWindow()->PixelToLogic(aPos); + + if (aPos.getX() - (aSize.Width() / 2) >= 0) + aPos.AdjustX( -(aSize.Width() / 2) ); + if (aPos.getY() - (aSize.Height() / 2) >= 0) + aPos.AdjustY( -(aSize.Height() / 2) ); + + ::tools::Rectangle aLogicRect(aPos, aSize); + pRectObj->SetLogicRect(aLogicRect); + pRectObj->SetOutlinerParaObject( std::move(pOutlParaObject) ); + mpDrawView->InsertObjectAtView(pRectObj.get(), *mpDrawView->GetSdrPageView()); + pOutl->Init( nOutlMode ); + } +} + +void DrawViewShell::InsertURLButton(const OUString& rURL, const OUString& rText, + const OUString& rTarget, const Point* pPos) +{ + bool bNewObj = true; + + const OUString sTargetURL( ::URIHelper::SmartRel2Abs( INetURLObject( GetDocSh()->GetMedium()->GetBaseURL() ), rURL, URIHelper::GetMaybeFileHdl(), true, false, + INetURLObject::EncodeMechanism::WasEncoded, + INetURLObject::DecodeMechanism::Unambiguous ) ); + if (mpDrawView->GetMarkedObjectList().GetMarkCount() > 0) + { + SdrObject* pMarkedObj = mpDrawView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj(); + if( pMarkedObj ) try + { + // change first marked object + if (SdrInventor::FmForm == pMarkedObj->GetObjInventor()) + { + SdrUnoObj* pUnoCtrl = static_cast< SdrUnoObj* >( pMarkedObj ); + + Reference< awt::XControlModel > xControlModel( pUnoCtrl->GetUnoControlModel(), UNO_SET_THROW ); + Reference< beans::XPropertySet > xPropSet( xControlModel, UNO_QUERY_THROW ); + + bool bIsButton = pMarkedObj->GetObjIdentifier() == SdrObjKind::FormButton; + if (!bIsButton && pMarkedObj->GetObjIdentifier() == SdrObjKind::UNO) + { + const Reference xInfo(xPropSet->getPropertySetInfo()); + bIsButton = xInfo.is() && xInfo->hasPropertyByName("ButtonType") + && xInfo->hasPropertyByName("Label") + && xInfo->hasPropertyByName("TargetURL"); + } + if (bIsButton) + { + bNewObj = false; + + xPropSet->setPropertyValue("Label", Any(rText)); + xPropSet->setPropertyValue("TargetURL", Any(sTargetURL)); + + if (!rTarget.isEmpty()) + xPropSet->setPropertyValue("TargetFrame", Any(rTarget)); + + xPropSet->setPropertyValue("ButtonType", Any(form::FormButtonType_URL)); +#if HAVE_FEATURE_AVMEDIA + if (::avmedia::MediaWindow::isMediaURL(rURL, ""/*TODO?*/)) + { + xPropSet->setPropertyValue("DispatchURLInternal", Any(true)); + } +#endif + } + } + if (bNewObj) + { + // add url as interaction for first selected shape + bNewObj = false; + + SdAnimationInfo* pInfo = SdDrawDocument::GetShapeUserData(*pMarkedObj, true); + pInfo->meClickAction = presentation::ClickAction_DOCUMENT; + pInfo->SetBookmark( sTargetURL ); + } + } + catch( uno::Exception& ) + { + } + } + + if (!bNewObj) + return; + + try + { + rtl::Reference pUnoCtrl = static_cast< SdrUnoObj* >( + SdrObjFactory::MakeNewObject( + GetView()->getSdrModelFromSdrView(), + SdrInventor::FmForm, + SdrObjKind::FormButton).get()); //, + //mpDrawView->GetSdrPageView()->GetPage())); + + Reference< awt::XControlModel > xControlModel( pUnoCtrl->GetUnoControlModel(), uno::UNO_SET_THROW ); + Reference< beans::XPropertySet > xPropSet( xControlModel, uno::UNO_QUERY_THROW ); + + xPropSet->setPropertyValue( "Label" , Any( rText ) ); + xPropSet->setPropertyValue( "TargetURL" , Any( sTargetURL ) ); + + if( !rTarget.isEmpty() ) + xPropSet->setPropertyValue( "TargetFrame" , Any( rTarget ) ); + + xPropSet->setPropertyValue( "ButtonType" , Any( form::FormButtonType_URL ) ); +#if HAVE_FEATURE_AVMEDIA + if ( ::avmedia::MediaWindow::isMediaURL( rURL, ""/*TODO?*/ ) ) + xPropSet->setPropertyValue( "DispatchURLInternal" , Any( true ) ); +#endif + + Point aPos; + + if (pPos) + { + aPos = *pPos; + } + else + { + aPos = ::tools::Rectangle(aPos, GetActiveWindow()->GetOutputSizePixel()).Center(); + aPos = GetActiveWindow()->PixelToLogic(aPos); + } + + Size aSize(4000, 1000); + aPos.AdjustX( -(aSize.Width() / 2) ); + aPos.AdjustY( -(aSize.Height() / 2) ); + pUnoCtrl->SetLogicRect(::tools::Rectangle(aPos, aSize)); + + SdrInsertFlags nOptions = SdrInsertFlags::SETDEFLAYER; + + OSL_ASSERT (GetViewShell()!=nullptr); + SfxInPlaceClient* pIpClient = GetViewShell()->GetIPClient(); + if (pIpClient!=nullptr && pIpClient->IsObjectInPlaceActive()) + { + nOptions |= SdrInsertFlags::DONTMARK; + } + + mpDrawView->InsertObjectAtView(pUnoCtrl.get(), *mpDrawView->GetSdrPageView(), nOptions); + } + catch( Exception& ) + { + } +} + +void DrawViewShell::ShowUIControls (bool bVisible) +{ + ViewShell::ShowUIControls (bVisible); + maTabControl->Show (bVisible); +} + +namespace slideshowhelp +{ + void ShowSlideShow(SfxRequest const & rReq, SdDrawDocument &rDoc) + { + Reference< XPresentation2 > xPresentation( rDoc.getPresentation() ); + if( !xPresentation.is() ) + return; + + sfx2::SfxNotebookBar::LockNotebookBar(); + if (SID_REHEARSE_TIMINGS == rReq.GetSlot()) + xPresentation->rehearseTimings(); + else if (rDoc.getPresentationSettings().mbCustomShow) + { + //fdo#69975 if a custom show has been set, then + //use it whether or not we've been asked to + //start from the current or first slide + xPresentation->start(); + + // if the custom show not set by default, only show it. + if (rDoc.getPresentationSettings().mbStartCustomShow) + rDoc.getPresentationSettings().mbCustomShow = false; + } + else if (SID_PRESENTATION_CURRENT_SLIDE == rReq.GetSlot()) + { + //If there is no custom show set, start will automatically + //start at the current page + xPresentation->start(); + } + else + { + //Start at page 0, this would blow away any custom + //show settings if any were set + Sequence< PropertyValue > aArguments{ comphelper::makePropertyValue("FirstPage", + OUString("0")) }; + xPresentation->startWithArguments( aArguments ); + } + sfx2::SfxNotebookBar::UnlockNotebookBar(); + } +} + +void DrawViewShell::StopSlideShow() +{ + Reference< XPresentation2 > xPresentation( GetDoc()->getPresentation() ); + if(xPresentation.is() && xPresentation->isRunning()) + { + if( mpDrawView->IsTextEdit() ) + mpDrawView->SdrEndTextEdit(); + + xPresentation->end(); + } +} + +} // end of namespace sd + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ -- cgit v1.2.3