/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DBG_UTIL #include #endif // GDI-Array #define EMR_HEADER 1 #define EMR_POLYBEZIER 2 #define EMR_POLYGON 3 #define EMR_POLYLINE 4 #define EMR_POLYBEZIERTO 5 #define EMR_POLYLINETO 6 #define EMR_POLYPOLYLINE 7 #define EMR_POLYPOLYGON 8 #define EMR_SETWINDOWEXTEX 9 #define EMR_SETWINDOWORGEX 10 #define EMR_SETVIEWPORTEXTEX 11 #define EMR_SETVIEWPORTORGEX 12 #define EMR_SETBRUSHORGEX 13 #define EMR_EOF 14 #define EMR_SETPIXELV 15 #define EMR_SETMAPPERFLAGS 16 #define EMR_SETMAPMODE 17 #define EMR_SETBKMODE 18 #define EMR_SETPOLYFILLMODE 19 #define EMR_SETROP2 20 #define EMR_SETSTRETCHBLTMODE 21 #define EMR_SETTEXTALIGN 22 #define EMR_SETCOLORADJUSTMENT 23 #define EMR_SETTEXTCOLOR 24 #define EMR_SETBKCOLOR 25 #define EMR_OFFSETCLIPRGN 26 #define EMR_MOVETOEX 27 #define EMR_SETMETARGN 28 #define EMR_EXCLUDECLIPRECT 29 #define EMR_INTERSECTCLIPRECT 30 #define EMR_SCALEVIEWPORTEXTEX 31 #define EMR_SCALEWINDOWEXTEX 32 #define EMR_SAVEDC 33 #define EMR_RESTOREDC 34 #define EMR_SETWORLDTRANSFORM 35 #define EMR_MODIFYWORLDTRANSFORM 36 #define EMR_SELECTOBJECT 37 #define EMR_CREATEPEN 38 #define EMR_CREATEBRUSHINDIRECT 39 #define EMR_DELETEOBJECT 40 #define EMR_ANGLEARC 41 #define EMR_ELLIPSE 42 #define EMR_RECTANGLE 43 #define EMR_ROUNDRECT 44 #define EMR_ARC 45 #define EMR_CHORD 46 #define EMR_PIE 47 #define EMR_SELECTPALETTE 48 #define EMR_CREATEPALETTE 49 #define EMR_SETPALETTEENTRIES 50 #define EMR_RESIZEPALETTE 51 #define EMR_REALIZEPALETTE 52 #define EMR_EXTFLOODFILL 53 #define EMR_LINETO 54 #define EMR_ARCTO 55 #define EMR_POLYDRAW 56 #define EMR_SETARCDIRECTION 57 #define EMR_SETMITERLIMIT 58 #define EMR_BEGINPATH 59 #define EMR_ENDPATH 60 #define EMR_CLOSEFIGURE 61 #define EMR_FILLPATH 62 #define EMR_STROKEANDFILLPATH 63 #define EMR_STROKEPATH 64 #define EMR_FLATTENPATH 65 #define EMR_WIDENPATH 66 #define EMR_SELECTCLIPPATH 67 #define EMR_ABORTPATH 68 #define EMR_COMMENT 70 // Contains arbitrary private data. // Comment Identifiers: #define EMR_COMMENT_EMFPLUS 0x2B464D45 // Contains embedded EMF+ records. #define EMR_COMMENT_EMFSPOOL 0x00000000 // Contains embedded EMFSPOOL records. #define EMR_COMMENT_PUBLIC 0x43494447 // Specify extensions to EMF processing. #define EMR_FILLRGN 71 #define EMR_FRAMERGN 72 #define EMR_INVERTRGN 73 #define EMR_PAINTRGN 74 #define EMR_EXTSELECTCLIPRGN 75 #define EMR_BITBLT 76 #define EMR_STRETCHBLT 77 #define EMR_MASKBLT 78 #define EMR_PLGBLT 79 #define EMR_SETDIBITSTODEVICE 80 #define EMR_STRETCHDIBITS 81 #define EMR_EXTCREATEFONTINDIRECTW 82 #define EMR_EXTTEXTOUTA 83 #define EMR_EXTTEXTOUTW 84 #define EMR_POLYBEZIER16 85 #define EMR_POLYGON16 86 #define EMR_POLYLINE16 87 #define EMR_POLYBEZIERTO16 88 #define EMR_POLYLINETO16 89 #define EMR_POLYPOLYLINE16 90 #define EMR_POLYPOLYGON16 91 #define EMR_POLYDRAW16 92 #define EMR_CREATEMONOBRUSH 93 #define EMR_CREATEDIBPATTERNBRUSHPT 94 #define EMR_EXTCREATEPEN 95 #define EMR_POLYTEXTOUTA 96 #define EMR_POLYTEXTOUTW 97 // WINDOWS VERSION >= 0x400 #define EMR_SETICMMODE 98 #define EMR_CREATECOLORSPACE 99 #define EMR_SETCOLORSPACE 100 #define EMR_DELETECOLORSPACE 101 #define EMR_GLSRECORD 102 #define EMR_GLSBOUNDEDRECORD 103 #define EMR_PIXELFORMAT 104 // WINDOWS VERSION >= 0x500 #define EMR_DRAWESCAPE 105 #define EMR_EXTESCAPE 106 #define EMR_STARTDOC 107 #define EMR_SMALLTEXTOUT 108 #define EMR_FORCEUFIMAPPING 109 #define EMR_NAMEDESCAPE 110 #define EMR_COLORCORRECTPALETTE 111 #define EMR_SETICMPROFILEA 112 #define EMR_SETICMPROFILEW 113 #define EMR_ALPHABLEND 114 #define EMR_ALPHADIBBLEND 115 #define EMR_TRANSPARENTBLT 116 #define EMR_TRANSPARENTDIB 117 #define EMR_GRADIENTFILL 118 #define EMR_SETLINKEDUFIS 119 #define EMR_SETTEXTJUSTIFICATION 120 #define PDF_SIGNATURE 0x50444620 // "PDF " /* [MS-EMF] - v20210625 - page 28 */ constexpr sal_Int32 ARCDIRECTION_CLOCKWISE = 0x00000002; namespace { /* [MS-EMF] - v20210625 - page 41 */ /* 2.1.26 Point Enumeration */ enum EMFPointTypes { PT_CLOSEFIGURE = 0x01, PT_LINETO = 0x02, PT_BEZIERTO = 0x04, PT_MOVETO = 0x06 }; const char * record_type_name(sal_uInt32 nRecType) { #ifndef SAL_LOG_INFO (void) nRecType; return ""; #else switch( nRecType ) { case EMR_HEADER: return "HEADER"; case EMR_POLYBEZIER: return "POLYBEZIER"; case EMR_POLYGON: return "POLYGON"; case EMR_POLYLINE: return "POLYLINE"; case EMR_POLYBEZIERTO: return "POLYBEZIERTO"; case EMR_POLYLINETO: return "POLYLINETO"; case EMR_POLYPOLYLINE: return "POLYPOLYLINE"; case EMR_POLYPOLYGON: return "POLYPOLYGON"; case EMR_SETWINDOWEXTEX: return "SETWINDOWEXTEX"; case EMR_SETWINDOWORGEX: return "SETWINDOWORGEX"; case EMR_SETVIEWPORTEXTEX: return "SETVIEWPORTEXTEX"; case EMR_SETVIEWPORTORGEX: return "SETVIEWPORTORGEX"; case EMR_SETBRUSHORGEX: return "SETBRUSHORGEX"; case EMR_EOF: return "EOF"; case EMR_SETPIXELV: return "SETPIXELV"; case EMR_SETMAPPERFLAGS: return "SETMAPPERFLAGS"; case EMR_SETMAPMODE: return "SETMAPMODE"; case EMR_SETBKMODE: return "SETBKMODE"; case EMR_SETPOLYFILLMODE: return "SETPOLYFILLMODE"; case EMR_SETROP2: return "SETROP2"; case EMR_SETSTRETCHBLTMODE: return "SETSTRETCHBLTMODE"; case EMR_SETTEXTALIGN: return "SETTEXTALIGN"; case EMR_SETCOLORADJUSTMENT: return "SETCOLORADJUSTMENT"; case EMR_SETTEXTCOLOR: return "SETTEXTCOLOR"; case EMR_SETBKCOLOR: return "SETBKCOLOR"; case EMR_OFFSETCLIPRGN: return "OFFSETCLIPRGN"; case EMR_MOVETOEX: return "MOVETOEX"; case EMR_SETMETARGN: return "SETMETARGN"; case EMR_EXCLUDECLIPRECT: return "EXCLUDECLIPRECT"; case EMR_INTERSECTCLIPRECT: return "INTERSECTCLIPRECT"; case EMR_SCALEVIEWPORTEXTEX: return "SCALEVIEWPORTEXTEX"; case EMR_SCALEWINDOWEXTEX: return "SCALEWINDOWEXTEX"; case EMR_SAVEDC: return "SAVEDC"; case EMR_RESTOREDC: return "RESTOREDC"; case EMR_SETWORLDTRANSFORM: return "SETWORLDTRANSFORM"; case EMR_MODIFYWORLDTRANSFORM: return "MODIFYWORLDTRANSFORM"; case EMR_SELECTOBJECT: return "SELECTOBJECT"; case EMR_CREATEPEN: return "CREATEPEN"; case EMR_CREATEBRUSHINDIRECT: return "CREATEBRUSHINDIRECT"; case EMR_DELETEOBJECT: return "DELETEOBJECT"; case EMR_ANGLEARC: return "ANGLEARC"; case EMR_ELLIPSE: return "ELLIPSE"; case EMR_RECTANGLE: return "RECTANGLE"; case EMR_ROUNDRECT: return "ROUNDRECT"; case EMR_ARC: return "ARC"; case EMR_CHORD: return "CHORD"; case EMR_PIE: return "PIE"; case EMR_SELECTPALETTE: return "SELECTPALETTE"; case EMR_CREATEPALETTE: return "CREATEPALETTE"; case EMR_SETPALETTEENTRIES: return "SETPALETTEENTRIES"; case EMR_RESIZEPALETTE: return "RESIZEPALETTE"; case EMR_REALIZEPALETTE: return "REALIZEPALETTE"; case EMR_EXTFLOODFILL: return "EXTFLOODFILL"; case EMR_LINETO: return "LINETO"; case EMR_ARCTO: return "ARCTO"; case EMR_POLYDRAW: return "POLYDRAW"; case EMR_SETARCDIRECTION: return "SETARCDIRECTION"; case EMR_SETMITERLIMIT: return "SETMITERLIMIT"; case EMR_BEGINPATH: return "BEGINPATH"; case EMR_ENDPATH: return "ENDPATH"; case EMR_CLOSEFIGURE: return "CLOSEFIGURE"; case EMR_FILLPATH: return "FILLPATH"; case EMR_STROKEANDFILLPATH: return "STROKEANDFILLPATH"; case EMR_STROKEPATH: return "STROKEPATH"; case EMR_FLATTENPATH: return "FLATTENPATH"; case EMR_WIDENPATH: return "WIDENPATH"; case EMR_SELECTCLIPPATH: return "SELECTCLIPPATH"; case EMR_ABORTPATH: return "ABORTPATH"; case EMR_COMMENT: return "COMMENT"; case EMR_FILLRGN: return "FILLRGN"; case EMR_FRAMERGN: return "FRAMERGN"; case EMR_INVERTRGN: return "INVERTRGN"; case EMR_PAINTRGN: return "PAINTRGN"; case EMR_EXTSELECTCLIPRGN: return "EXTSELECTCLIPRGN"; case EMR_BITBLT: return "BITBLT"; case EMR_STRETCHBLT: return "STRETCHBLT"; case EMR_MASKBLT: return "MASKBLT"; case EMR_PLGBLT: return "PLGBLT"; case EMR_SETDIBITSTODEVICE: return "SETDIBITSTODEVICE"; case EMR_STRETCHDIBITS: return "STRETCHDIBITS"; case EMR_EXTCREATEFONTINDIRECTW: return "EXTCREATEFONTINDIRECTW"; case EMR_EXTTEXTOUTA: return "EXTTEXTOUTA"; case EMR_EXTTEXTOUTW: return "EXTTEXTOUTW"; case EMR_POLYBEZIER16: return "POLYBEZIER16"; case EMR_POLYGON16: return "POLYGON16"; case EMR_POLYLINE16: return "POLYLINE16"; case EMR_POLYBEZIERTO16: return "POLYBEZIERTO16"; case EMR_POLYLINETO16: return "POLYLINETO16"; case EMR_POLYPOLYLINE16: return "POLYPOLYLINE16"; case EMR_POLYPOLYGON16: return "POLYPOLYGON16"; case EMR_POLYDRAW16: return "POLYDRAW16"; case EMR_CREATEMONOBRUSH: return "CREATEMONOBRUSH"; case EMR_CREATEDIBPATTERNBRUSHPT: return "CREATEDIBPATTERNBRUSHPT"; case EMR_EXTCREATEPEN: return "EXTCREATEPEN"; case EMR_POLYTEXTOUTA: return "POLYTEXTOUTA"; case EMR_POLYTEXTOUTW: return "POLYTEXTOUTW"; case EMR_SETICMMODE: return "SETICMMODE"; case EMR_CREATECOLORSPACE: return "CREATECOLORSPACE"; case EMR_SETCOLORSPACE: return "SETCOLORSPACE"; case EMR_DELETECOLORSPACE: return "DELETECOLORSPACE"; case EMR_GLSRECORD: return "GLSRECORD"; case EMR_GLSBOUNDEDRECORD: return "GLSBOUNDEDRECORD"; case EMR_PIXELFORMAT: return "PIXELFORMAT"; case EMR_DRAWESCAPE: return "DRAWESCAPE"; case EMR_EXTESCAPE: return "EXTESCAPE"; case EMR_STARTDOC: return "STARTDOC"; case EMR_SMALLTEXTOUT: return "SMALLTEXTOUT"; case EMR_FORCEUFIMAPPING: return "FORCEUFIMAPPING"; case EMR_NAMEDESCAPE: return "NAMEDESCAPE"; case EMR_COLORCORRECTPALETTE: return "COLORCORRECTPALETTE"; case EMR_SETICMPROFILEA: return "SETICMPROFILEA"; case EMR_SETICMPROFILEW: return "SETICMPROFILEW"; case EMR_ALPHABLEND: return "ALPHABLEND"; case EMR_ALPHADIBBLEND: return "ALPHADIBBLEND"; case EMR_TRANSPARENTBLT: return "TRANSPARENTBLT"; case EMR_TRANSPARENTDIB: return "TRANSPARENTDIB"; case EMR_GRADIENTFILL: return "GRADIENTFILL"; case EMR_SETLINKEDUFIS: return "SETLINKEDUFIS"; case EMR_SETTEXTJUSTIFICATION: return "SETTEXTJUSTIFICATION"; default: // Yes, return a pointer to a static buffer. This is a very // local debugging output function, so no big deal. static char buffer[11]; o3tl::sprintf(buffer, "0x%08" SAL_PRIxUINT32, nRecType); return buffer; } #endif } struct BLENDFUNCTION { unsigned char aBlendOperation; unsigned char aBlendFlags; unsigned char aSrcConstantAlpha; unsigned char aAlphaFormat; friend SvStream& operator>>(SvStream& rInStream, BLENDFUNCTION& rBlendFun); }; SvStream& operator>>(SvStream& rInStream, BLENDFUNCTION& rBlendFun) { rInStream.ReadUChar(rBlendFun.aBlendOperation); rInStream.ReadUChar(rBlendFun.aBlendFlags); rInStream.ReadUChar(rBlendFun.aSrcConstantAlpha); rInStream.ReadUChar(rBlendFun.aAlphaFormat); return rInStream; } bool ImplReadRegion( basegfx::B2DPolyPolygon& rPolyPoly, SvStream& rStream, sal_uInt32 nLen, Point aWinOrg ) { if (nLen < 32) // 32 bytes - Size of RegionDataHeader return false; sal_uInt32 nHdSize, nType, nCountRects, nRgnSize; rStream.ReadUInt32(nHdSize); rStream.ReadUInt32(nType); rStream.ReadUInt32(nCountRects); rStream.ReadUInt32(nRgnSize); sal_Int32 nLeft, nTop, nRight, nBottom; //bounds of the region rStream.ReadInt32(nLeft); rStream.ReadInt32(nTop); rStream.ReadInt32(nRight); rStream.ReadInt32(nBottom); if (!rStream.good() || nCountRects == 0 || nType != emfio::RDH_RECTANGLES) return false; SAL_INFO("emfio", "\t\tBounds Left: " << nLeft << ", top: " << nTop << ", right: " << nRight << ", bottom: " << nBottom); nLen -= 32; sal_uInt32 nSize; if (o3tl::checked_multiply(nCountRects, 16, nSize)) return false; if (nLen < nSize) return false; for (sal_uInt32 i = 0; i < nCountRects; ++i) { rStream.ReadInt32(nLeft); rStream.ReadInt32(nTop); rStream.ReadInt32(nRight); rStream.ReadInt32(nBottom); nLeft += aWinOrg.X(); nRight += aWinOrg.X(); nTop += aWinOrg.Y(); nBottom += aWinOrg.Y(); rPolyPoly.append( basegfx::utils::createPolygonFromRect( ::basegfx::B2DRectangle( nLeft, nTop, nRight, nBottom ) ) ); SAL_INFO("emfio", "\t\t" << i << " Left: " << nLeft << ", top: " << nTop << ", right: " << nRight << ", bottom: " << nBottom); } if (!utl::ConfigManager::IsFuzzing()) { rPolyPoly = basegfx::utils::solveCrossovers(rPolyPoly); rPolyPoly = basegfx::utils::stripNeutralPolygons(rPolyPoly); rPolyPoly = basegfx::utils::stripDispensablePolygons(rPolyPoly); } return true; } } // anonymous namespace namespace emfio { EmfReader::EmfReader(SvStream& rStream,GDIMetaFile& rGDIMetaFile) : MtfTools(rGDIMetaFile, rStream) , mnRecordCount(0) , mbRecordPath(false) , mbEMFPlus(false) , mbEMFPlusDualMode(false) { } EmfReader::~EmfReader() { } const sal_uInt32 EMR_COMMENT_BEGINGROUP = 0x00000002; const sal_uInt32 EMR_COMMENT_ENDGROUP = 0x00000003; const sal_uInt32 EMR_COMMENT_MULTIFORMATS = 0x40000004; const sal_uInt32 EMR_COMMENT_WINDOWS_METAFILE = 0x80000001; void EmfReader::ReadGDIComment(sal_uInt32 nCommentId) { sal_uInt32 nPublicCommentIdentifier(0); mpInputStream->ReadUInt32(nPublicCommentIdentifier); SAL_INFO("emfio", "\t\tEMR_COMMENT_PUBLIC, id: 0x" << std::hex << nCommentId << std::dec); switch (nPublicCommentIdentifier) { case EMR_COMMENT_BEGINGROUP: { SAL_INFO("emfio", "\t\t\tEMR_COMMENT_BEGINGROUP"); sal_uInt32 left, top, right, bottom; mpInputStream->ReadUInt32(left).ReadUInt32(top).ReadUInt32(right).ReadUInt32(bottom); SAL_INFO("emfio", "\t\t\t\tBounding rect"); SAL_INFO("emfio", "\t\t\t\t\tLeft: " << left); SAL_INFO("emfio", "\t\t\t\t\tTop: " << top); SAL_INFO("emfio", "\t\t\t\t\tRight: " << right); SAL_INFO("emfio", "\t\t\t\t\tBottom: " << bottom); sal_uInt32 nDescChars(0); mpInputStream->ReadUInt32(nDescChars); OUString aDesc; for (sal_uInt32 i=0; i < nDescChars; i++) { sal_uInt16 cChar(0); mpInputStream->ReadUInt16(cChar); if (cChar == '\0') break; sal_Unicode cUniChar = static_cast(cChar); aDesc = aDesc + OUStringChar(cUniChar); } SAL_INFO("emfio", "\t\tDescription: " << aDesc); } break; case EMR_COMMENT_ENDGROUP: SAL_INFO("emfio", "\t\t\tEMR_COMMENT_ENDGROUP"); break; case EMR_COMMENT_MULTIFORMATS: ReadMultiformatsComment(); break; case EMR_COMMENT_WINDOWS_METAFILE: SAL_WARN("emfio", "\t\tEMR_COMMENT_WINDOWS_METAFILE not implemented"); break; default: SAL_WARN("emfio", "\t\tEMR_COMMENT_PUBLIC not implemented, id: 0x" << std::hex << nCommentId << std::dec); break; } } void EmfReader::ReadMultiformatsComment() { tools::Rectangle aOutputRect = EmfReader::ReadRectangle(); sal_uInt32 nCountFormats(0); mpInputStream->ReadUInt32(nCountFormats); if (nCountFormats < 1) { return; } // Read the first EmrFormat. sal_uInt32 nSignature(0); mpInputStream->ReadUInt32(nSignature); if (nSignature != PDF_SIGNATURE) { return; } sal_uInt32 nVersion(0); mpInputStream->ReadUInt32(nVersion); if (nVersion != 1) { return; } sal_uInt32 nSizeData(0); mpInputStream->ReadUInt32(nSizeData); if (!nSizeData || nSizeData > mpInputStream->remainingSize()) { return; } sal_uInt32 nOffData(0); mpInputStream->ReadUInt32(nOffData); if (!nOffData) { return; } std::vector aPdfData(nSizeData); mpInputStream->ReadBytes(aPdfData.data(), aPdfData.size()); if (!mpInputStream->good()) { return; } SvMemoryStream aPdfStream; aPdfStream.WriteBytes(aPdfData.data(), aPdfData.size()); aPdfStream.Seek(0); Graphic aGraphic; if (!vcl::ImportPDF(aPdfStream, aGraphic)) { return; } // aGraphic will be the only output of the EMF parser, so its size hint can be the same as // ours. aGraphic.getVectorGraphicData()->setSizeHint(maSizeHint); maBmpSaveList.emplace_back( aGraphic.GetBitmapEx(), aOutputRect, SRCCOPY, /*bForceAlpha=*/true); const std::shared_ptr pVectorGraphicData = aGraphic.getVectorGraphicData(); if (!pVectorGraphicData) { return; } if (pVectorGraphicData->getType() != VectorGraphicDataType::Pdf) { return; } mbReadOtherGraphicFormat = true; } void EmfReader::ReadEMFPlusComment(sal_uInt32 length, bool& bHaveDC) { if (!mbEMFPlus) { PassEMFPlusHeaderInfo(); #if OSL_DEBUG_LEVEL > 1 // debug code - write the stream to debug file /tmp/emf-stream.emf sal_uInt64 const pos = mpInputStream->Tell(); mpInputStream->Seek(0); SvFileStream file( OUString( "/tmp/emf-stream.emf" ), StreamMode::WRITE | StreamMode::TRUNC ); mpInputStream->WriteStream(file); file.Flush(); file.Close(); mpInputStream->Seek( pos ); #endif } mbEMFPlus = true; sal_uInt64 const pos = mpInputStream->Tell(); auto buffer = std::make_unique( length ); PassEMFPlus( buffer.get(), mpInputStream->ReadBytes(buffer.get(), length) ); buffer.reset(); mpInputStream->Seek( pos ); bHaveDC = false; // skip in SeekRel if impossibly unavailable sal_uInt32 nRemainder = length; const size_t nRequiredHeaderSize = 12; while (nRemainder >= nRequiredHeaderSize) { sal_uInt16 type(0), flags(0); sal_uInt32 size(0), dataSize(0); mpInputStream->ReadUInt16( type ).ReadUInt16( flags ).ReadUInt32( size ).ReadUInt32( dataSize ); nRemainder -= nRequiredHeaderSize; SAL_INFO("emfio", "\t\tEMF+ record type: 0x" << std::hex << type << std::dec); // Get Device Context // TODO We should use EmfPlusRecordType::GetDC instead if( type == 0x4004 ) { bHaveDC = true; SAL_INFO("emfio", "\t\tEMF+ lock DC (device context)"); } // look for the "dual mode" in header // it indicates that either EMF or EMF+ records should be processed // 0x4001 = EMF+ header // flags & 1 = dual mode active if ( type == 0x4001 && flags & 1 ) { mbEMFPlusDualMode = true; SAL_INFO ("emfio", "\t\tEMF+ dual mode detected"); } // Get the length of the remaining data of this record based // on the alleged size sal_uInt32 nRemainingRecordData = size >= nRequiredHeaderSize ? size-nRequiredHeaderSize : 0; // clip to available size nRemainingRecordData = std::min(nRemainingRecordData, nRemainder); mpInputStream->SeekRel(nRemainingRecordData); nRemainder -= nRemainingRecordData; } mpInputStream->SeekRel(nRemainder); } // these are referenced from inside the templates static SvStream& operator >> (SvStream& rStream, sal_Int16 &n) { return rStream.ReadInt16(n); } static SvStream& operator >> (SvStream& rStream, sal_Int32 &n) { return rStream.ReadInt32(n); } /** * Reads polygons from the stream. * The \ parameter is for the type of the points (sal_uInt32 or sal_uInt16). * skipFirst: if the first point read is the 0th point or the 1st point in the array. * */ template tools::Polygon EmfReader::ReadPolygonWithSkip(const bool skipFirst, sal_uInt32 nNextPos) { sal_uInt32 nPoints(0), nStartIndex(0); mpInputStream->SeekRel( 16 ); mpInputStream->ReadUInt32( nPoints ); if (skipFirst) { nPoints ++; nStartIndex ++; } return ReadPolygon(nStartIndex, nPoints, nNextPos); } /** * Reads polygons from the stream. * The \ parameter is for the type of the points * nStartIndex: which is the starting index in the polygon of the first point read * nPoints: number of points * mpInputStream: the stream containing the polygons * */ template tools::Polygon EmfReader::ReadPolygon(sal_uInt32 nStartIndex, sal_uInt32 nPoints, sal_uInt32 nNextPos) { SAL_INFO ("emfio", "\t\tPolygon:"); bool bRecordOk = nPoints <= SAL_MAX_UINT16; SAL_WARN_IF(!bRecordOk, "emfio", "polygon record has more polygons than we can handle"); if (!bRecordOk || !nPoints) return tools::Polygon(); auto nRemainingSize = std::min(nNextPos - mpInputStream->Tell(), mpInputStream->remainingSize()); auto nMaxPossiblePoints = nRemainingSize / (sizeof(T) * 2); auto nPointCount = nPoints - nStartIndex; if (nPointCount > nMaxPossiblePoints) { SAL_WARN("emfio", "polygon claims more points than record can provide, truncating"); nPoints = nMaxPossiblePoints + nStartIndex; } tools::Polygon aPolygon(nPoints); for (sal_uInt32 i = nStartIndex ; i < nPoints && mpInputStream->good(); i++ ) { T nX, nY; *mpInputStream >> nX >> nY; SAL_INFO("emfio", "\t\t\tPoint " << i << " of " << nPoints - 1 << ": " << nX << ", " << nY); if (!mpInputStream->good()) { SAL_WARN("emfio", "short read on polygon, truncating"); aPolygon.SetSize(i); break; } aPolygon[ i ] = Point( nX, nY ); } return aPolygon; } /** * Reads a polyline from the WMF file and draws it * The \ parameter refers to the type of the points. (e.g. sal_uInt16 or sal_uInt32) * */ template void EmfReader::ReadAndDrawPolyLine(sal_uInt32 nNextPos) { SAL_INFO("emfio", "\t\tPolyline: "); mpInputStream->SeekRel( 0x10 ); // TODO Skipping Bounds. A 128-bit WMF RectL object (specifies the bounding rectangle in device units.) sal_uInt32 nNumberOfPolylines = 0; mpInputStream->ReadUInt32( nNumberOfPolylines ); SAL_INFO("emfio", "\t\t\tPolylines: " << nNumberOfPolylines); sal_uInt32 nCount = 0; mpInputStream->ReadUInt32( nCount ); // total number of points in all polylines SAL_INFO("emfio", "\t\t\tPoints: " << nCount); const auto nEndPos = std::min(nNextPos, mnEndPos); if (mpInputStream->Tell() >= nEndPos) return; // taking the amount of points of each polygon, retrieving the total number of points if ( !(mpInputStream->good() && ( nNumberOfPolylines < SAL_MAX_UINT32 / sizeof( sal_uInt16 ) ) && ( nNumberOfPolylines * sizeof( sal_uInt16 ) ) <= ( nEndPos - mpInputStream->Tell() )) ) return; std::unique_ptr< sal_uInt32[] > pnPolylinePointCount( new sal_uInt32[ nNumberOfPolylines ] ); for ( sal_uInt32 i = 0; i < nNumberOfPolylines && mpInputStream->good(); i++ ) { sal_uInt32 nPoints; mpInputStream->ReadUInt32( nPoints ); SAL_INFO("emfio", "\t\t\tPoint " << i << " of " << nNumberOfPolylines << ": " << nPoints); pnPolylinePointCount[ i ] = nPoints; } // Get polyline points: for ( sal_uInt32 i = 0; ( i < nNumberOfPolylines ) && mpInputStream->good(); i++ ) { tools::Polygon aPolygon = ReadPolygon(0, pnPolylinePointCount[i], nNextPos); DrawPolyLine(std::move(aPolygon), false, mbRecordPath); } } /** * Reads a poly polygon from the WMF file and draws it. * The \ parameter refers to the type of the points. (e.g. sal_uInt16 or sal_uInt32) * */ template void EmfReader::ReadAndDrawPolyPolygon(sal_uInt32 nNextPos) { SAL_INFO("emfio", "\t\tPolygon: "); mpInputStream->SeekRel( 0x10 ); // RectL bounds sal_uInt32 nPoly(0), nGesPoints(0), nReadPoints(0); // Number of polygons mpInputStream->ReadUInt32( nPoly ).ReadUInt32( nGesPoints ); SAL_INFO("emfio", "\t\t\tPolygons: " << nPoly); SAL_INFO("emfio", "\t\t\tPoints: " << nGesPoints); const auto nEndPos = std::min(nNextPos, mnEndPos); if (mpInputStream->Tell() >= nEndPos) return; if (!mpInputStream->good()) return; //check against numeric overflowing if (nGesPoints >= SAL_MAX_UINT32 / sizeof(Point)) return; if (nPoly >= SAL_MAX_UINT32 / sizeof(sal_uInt16)) return; if (nPoly * sizeof(sal_uInt16) > nEndPos - mpInputStream->Tell()) return; // Get number of points in each polygon std::vector aPoints(nPoly); for (sal_uInt32 i = 0; i < nPoly && mpInputStream->good(); ++i) { sal_uInt32 nPoints(0); mpInputStream->ReadUInt32( nPoints ); SAL_INFO("emfio", "\t\t\t\tPolygon " << i << " points: " << nPoints); aPoints[i] = static_cast(nPoints); } if ( mpInputStream->good() && ( nGesPoints * (sizeof(T)+sizeof(T)) ) <= ( nEndPos - mpInputStream->Tell() ) ) { // Get polygon points tools::PolyPolygon aPolyPoly(nPoly); for (sal_uInt32 i = 0; i < nPoly && mpInputStream->good(); ++i) { const sal_uInt16 nPointCount(aPoints[i]); std::vector aPtAry(nPointCount); for (sal_uInt16 j = 0; j < nPointCount && mpInputStream->good(); ++j) { T nX(0), nY(0); *mpInputStream >> nX >> nY; aPtAry[j] = Point( nX, nY ); ++nReadPoints; } aPolyPoly.Insert(tools::Polygon(aPtAry.size(), aPtAry.data())); } DrawPolyPolygon(aPolyPoly, mbRecordPath); } OSL_ENSURE(nReadPoints == nGesPoints, "The number Points processed from EMR_POLYPOLYGON is unequal imported number (!)"); } bool EmfReader::ReadEnhWMF() { sal_uInt32 nStretchBltMode = 0; sal_uInt32 nNextPos(0), nW(0), nH(0), nColor(0), nIndex(0), nDat32(0), nNom1(0), nDen1(0), nNom2(0), nDen2(0); sal_Int32 nX32(0), nY32(0), nx32(0), ny32(0); bool bStatus = ReadHeader(); bool bHaveDC = false; OUString aEMFPlusDisable; rtl::Bootstrap::get("EMF_PLUS_DISABLE", aEMFPlusDisable); bool bEnableEMFPlus = aEMFPlusDisable.isEmpty(); if (!mbEnableEMFPlus) { // EMF+ is enabled if neither the bootstrap variable, not the member variable disables // it. bEnableEMFPlus = mbEnableEMFPlus; } SAL_INFO("emfio", "EMF+ reading is " << (bEnableEMFPlus ? "enabled" : "disabled")); while (bStatus && mnRecordCount-- && mpInputStream->good() && !mbReadOtherGraphicFormat) { sal_uInt32 nRecType(0), nRecSize(0); mpInputStream->ReadUInt32(nRecType).ReadUInt32(nRecSize); if ( !mpInputStream->good() || ( nRecSize < 8 ) || ( nRecSize & 3 ) ) // Parameters are always divisible by 4 { bStatus = false; break; } auto nCurPos = mpInputStream->Tell(); if (mnEndPos < nCurPos - 8) { bStatus = false; break; } const sal_uInt32 nMaxPossibleRecSize = mnEndPos - (nCurPos - 8); if (nRecSize > nMaxPossibleRecSize) { bStatus = false; break; } nNextPos = nCurPos + (nRecSize - 8); if( !maBmpSaveList.empty() && ( nRecType != EMR_STRETCHBLT ) && ( nRecType != EMR_STRETCHDIBITS ) ) { ResolveBitmapActions( maBmpSaveList ); } bool bFlag = false; SAL_INFO("emfio", "0x" << std::hex << (nNextPos - nRecSize) << "-0x" << nNextPos << " " << record_type_name(nRecType) << " size: " << std::dec << nRecSize); if( bEnableEMFPlus && nRecType == EMR_COMMENT ) { sal_uInt32 length; mpInputStream->ReadUInt32( length ); SAL_INFO("emfio", "\tGDI comment, length: " << length); if( mpInputStream->good() && length >= 4 && length <= mpInputStream->remainingSize() ) { sal_uInt32 nCommentId; mpInputStream->ReadUInt32( nCommentId ); SAL_INFO("emfio", "\t\tbegin " << static_cast(nCommentId & 0xff) << static_cast((nCommentId & 0xff00) >> 8) << static_cast((nCommentId & 0xff0000) >> 16) << static_cast((nCommentId & 0xff000000) >> 24) << " id: 0x" << std::hex << nCommentId << std::dec); if( nCommentId == EMR_COMMENT_EMFPLUS && nRecSize >= 12 ) { // [MS-EMF] 2.3.3: DataSize includes both CommentIdentifier and CommentRecordParm fields. // We have already read 4-byte CommentIdentifier, so reduce length appropriately ReadEMFPlusComment( length-4, bHaveDC ); } else if( nCommentId == EMR_COMMENT_PUBLIC && nRecSize >= 12 ) { ReadGDIComment(nCommentId); } else if( nCommentId == EMR_COMMENT_EMFSPOOL && nRecSize >= 12 ) { SAL_WARN("emfio", "\t\tEMFSPOOL not implemented, id: 0x" << std::hex << nCommentId << std::dec); // TODO Implement reading EMFSPOOL comment } else { SAL_WARN("emfio", "\t\tunknown id: 0x" << std::hex << nCommentId << std::dec); } } } else if ( !bHaveDC && mbEMFPlusDualMode && nRecType != EMR_HEADER && nRecType != EMR_EOF ) { // skip content (EMF record) in dual mode // we process only EMR_COMMENT (see above) to access EMF+ data // with 2 exceptions, according to EMF+ specification: // EMR_HEADER and EMR_EOF // if a device context is given (bHaveDC) process the following EMF record, too. } else if( !mbEMFPlus || bHaveDC || nRecType == EMR_EOF ) { switch( nRecType ) { case EMR_POLYBEZIERTO : DrawPolyBezier(ReadPolygonWithSkip(true, nNextPos), true, mbRecordPath); break; case EMR_POLYBEZIER : DrawPolyBezier(ReadPolygonWithSkip(false, nNextPos), false, mbRecordPath); break; case EMR_POLYGON : DrawPolygon(ReadPolygonWithSkip(false, nNextPos), mbRecordPath); break; case EMR_POLYLINETO : DrawPolyLine(ReadPolygonWithSkip(true, nNextPos), true, mbRecordPath); break; case EMR_POLYDRAW: { sal_uInt32 nPointsCount(0), nBezierCount(0); std::vector aPoints; bool wrongFile = false; std::vector aPointTypes; mpInputStream->ReadInt32(nX32) .ReadInt32(nY32) .ReadInt32(nx32) .ReadInt32(ny32) .ReadUInt32(nPointsCount); aPoints.reserve(std::min(nPointsCount, mpInputStream->remainingSize() / (sizeof(sal_Int32) * 2))); for (sal_uInt32 i = 0; i < nPointsCount && mpInputStream->good(); i++) { sal_Int32 nX, nY; *mpInputStream >> nX >> nY; aPoints.push_back(Point(nX, nY)); } aPointTypes.reserve(std::min(nPointsCount, mpInputStream->remainingSize())); for (sal_uInt32 i = 0; i < nPointsCount && mpInputStream->good(); i++) { unsigned char nPointType(0); mpInputStream->ReadUChar(nPointType); aPointTypes.push_back(nPointType); } nPointsCount = std::min(aPoints.size(), aPointTypes.size()); for (sal_uInt32 i = 0; i < nPointsCount; i++) { SAL_INFO_IF(aPointTypes[i] == PT_MOVETO, "emfio", "\t\t" << i << "/" << nPointsCount - 1 << " PT_MOVETO, " << aPoints[i].getX() << ", " << aPoints[i].getY()); SAL_INFO_IF((aPointTypes[i] != PT_MOVETO) && (aPointTypes[i] & PT_LINETO), "emfio", "\t\t" << i << "/" << nPointsCount - 1 << " PT_LINETO, " << aPoints[i].getX() << ", " << aPoints[i].getY()); SAL_INFO_IF((aPointTypes[i] != PT_MOVETO) && (aPointTypes[i] & PT_CLOSEFIGURE), "emfio", "\t\t" << i << "/" << nPointsCount - 1 << " PT_CLOSEFIGURE, " << aPoints[i].getX() << ", " << aPoints[i].getY()); SAL_INFO_IF((aPointTypes[i] != PT_MOVETO) && (aPointTypes[i] & PT_BEZIERTO), "emfio", "\t\t" << i << "/" << nPointsCount - 1 << " PT_BEZIERTO, " << aPoints[i].getX() << ", " << aPoints[i].getY()); if ((aPointTypes[i] != PT_MOVETO) && (aPointTypes[i] & PT_BEZIERTO)) nBezierCount++; else if (nBezierCount % 3 == 0) nBezierCount = 0; else { SAL_WARN( "emfio", "EMF file error: Number of Bezier points is not set of three."); wrongFile = true; } } if (wrongFile) break; for (sal_uInt32 i = 0; i < nPointsCount; i++) { if (aPointTypes[i] == PT_MOVETO) MoveTo(aPoints[i], true); else if (aPointTypes[i] & PT_LINETO) { LineTo(aPoints[i], true); if (aPointTypes[i] & PT_CLOSEFIGURE) ClosePath(); } else if (aPointTypes[i] & PT_BEZIERTO) { if (nPointsCount - i < 3) { SAL_WARN("emfio", "EMF file error: Not enough Bezier points."); break; } tools::Polygon aPolygon(4); aPolygon[0] = maActPos; aPolygon[1] = aPoints[i++]; aPolygon[2] = aPoints[i++]; aPolygon[3] = aPoints[i]; DrawPolyBezier(std::move(aPolygon), true, true); if (aPointTypes[i] & PT_CLOSEFIGURE) ClosePath(); } } StrokeAndFillPath(true, false); } break; case EMR_POLYLINE : DrawPolyLine(ReadPolygonWithSkip(false, nNextPos), false, mbRecordPath); break; case EMR_POLYPOLYLINE : ReadAndDrawPolyLine(nNextPos); break; case EMR_POLYPOLYGON : ReadAndDrawPolyPolygon(nNextPos); break; case EMR_SETWINDOWEXTEX : { sal_Int32 w = 0, h = 0; mpInputStream->ReadInt32( w ).ReadInt32( h ); SAL_INFO("emfio", "\t\tWidth: " << w); SAL_INFO("emfio", "\t\tHeight: " << h); SetWinExt( Size( w, h ), true); } break; case EMR_SETWINDOWORGEX : { mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ); SAL_INFO("emfio", "\t\tPoint: (" << nX32 << ", " << nY32 << ")"); SetWinOrg( Point( nX32, nY32 ), true); } break; case EMR_SCALEWINDOWEXTEX : { mpInputStream->ReadUInt32( nNom1 ).ReadUInt32( nDen1 ).ReadUInt32( nNom2 ).ReadUInt32( nDen2 ); SAL_INFO("emfio", "\t\tHorizontal scale: " << nNom1 << " / " << nDen1); SAL_INFO("emfio", "\t\tVertical scale: " << nNom2 << " / " << nDen2); if (nDen1 != 0 && nDen2 != 0) ScaleWinExt( static_cast(nNom1) / nDen1, static_cast(nNom2) / nDen2 ); else SAL_WARN("vcl.emf", "ignoring bogus divide by zero"); } break; case EMR_SETVIEWPORTORGEX : { mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ); SAL_INFO("emfio", "\t\tPoint: (" << nX32 << ", " << nY32 << ")"); SetDevOrg( Point( nX32, nY32 ) ); } break; case EMR_SCALEVIEWPORTEXTEX : { mpInputStream->ReadUInt32( nNom1 ).ReadUInt32( nDen1 ).ReadUInt32( nNom2 ).ReadUInt32( nDen2 ); SAL_INFO("emfio", "\t\tHorizontal scale: " << nNom1 << " / " << nDen1); SAL_INFO("emfio", "\t\tVertical scale: " << nNom2 << " / " << nDen2); if (nDen1 != 0 && nDen2 != 0) ScaleDevExt( static_cast(nNom1) / nDen1, static_cast(nNom2) / nDen2 ); else SAL_WARN("vcl.emf", "ignoring bogus divide by zero"); } break; case EMR_SETVIEWPORTEXTEX : { sal_Int32 w = 0, h = 0; mpInputStream->ReadInt32( w ).ReadInt32( h ); SAL_INFO("emfio", "\t\tWidth: " << w); SAL_INFO("emfio", "\t\tHeight: " << h); SetDevExt( Size( w, h ) ); } break; case EMR_EOF : mnRecordCount = 0; break; case EMR_SETPIXELV : { mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ); SAL_INFO("emfio", "\t\tPoint: (" << nX32 << ", " << nY32 << ")"); DrawPixel( Point( nX32, nY32 ), ReadColor() ); } break; case EMR_SETMAPMODE : { sal_uInt32 nMapMode(0); mpInputStream->ReadUInt32( nMapMode ); SAL_INFO("emfio", "\t\tMapMode: 0x" << std::hex << nMapMode << std::dec); SetMapMode( static_cast(nMapMode) ); } break; case EMR_SETBKMODE : { mpInputStream->ReadUInt32( nDat32 ); SAL_INFO("emfio", "\t\tBkMode: 0x" << std::hex << nDat32 << std::dec); SetBkMode( static_cast(nDat32) ); } break; case EMR_SETPOLYFILLMODE : break; case EMR_SETROP2 : { mpInputStream->ReadUInt32( nDat32 ); SAL_INFO("emfio", "\t\tROP2: 0x" << std::hex << nDat32 << std::dec); SetRasterOp( static_cast(nDat32) ); } break; case EMR_SETSTRETCHBLTMODE : { mpInputStream->ReadUInt32( nStretchBltMode ); SAL_INFO("emfio", "\t\tStretchBltMode: 0x" << std::hex << nDat32 << std::dec); } break; case EMR_SETTEXTALIGN : { mpInputStream->ReadUInt32( nDat32 ); SAL_INFO("emfio", "\t\tTextAlign: 0x" << std::hex << nDat32 << std::dec); SetTextAlign( nDat32 ); } break; case EMR_SETTEXTCOLOR : { SetTextColor( ReadColor() ); } break; case EMR_SETARCDIRECTION: { mpInputStream->ReadUInt32(nIndex); SetArcDirection(nIndex == ARCDIRECTION_CLOCKWISE); } break; case EMR_SETBKCOLOR : { SetBkColor( ReadColor() ); } break; case EMR_OFFSETCLIPRGN : { mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ); SAL_INFO("emfio", "\t\tPoint: (" << nX32 << ", " << nY32 << ")"); MoveClipRegion( Size( nX32, nY32 ) ); } break; case EMR_MOVETOEX : { mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ); SAL_INFO("emfio", "\t\tPoint: (" << nX32 << ", " << nY32 << ")"); MoveTo( Point( nX32, nY32 ), mbRecordPath); } break; case EMR_INTERSECTCLIPRECT : { mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ).ReadInt32( nx32 ).ReadInt32( ny32 ); IntersectClipRect( ReadRectangle( nX32, nY32, nx32, ny32 ) ); SAL_INFO("emfio", "\t\tPoint: (" << nX32 << ", " << nY32 << ")"); SAL_INFO("emfio", "\t\tPoint: (" << nx32 << ", " << ny32 << ")"); } break; case EMR_SAVEDC : { Push(); } break; case EMR_RESTOREDC : { sal_Int32 nSavedDC(0); mpInputStream->ReadInt32( nSavedDC ); SAL_INFO( "emfio", "\t\t SavedDC Index: " << nSavedDC ); if ( nSavedDC < 0 ) Pop( nSavedDC ); else Pop( -1 ); // For RestoreDC values above -1, treat as get last element } break; case EMR_SETWORLDTRANSFORM : { XForm aTempXForm; *mpInputStream >> aTempXForm; SetWorldTransform( aTempXForm ); } break; case EMR_MODIFYWORLDTRANSFORM : { sal_uInt32 nMode(0); XForm aTempXForm; *mpInputStream >> aTempXForm; mpInputStream->ReadUInt32( nMode ); ModifyWorldTransform( aTempXForm, static_cast(nMode) ); } break; case EMR_SELECTOBJECT : { mpInputStream->ReadUInt32( nIndex ); SelectObject( nIndex ); } break; case EMR_CREATEPEN: { mpInputStream->ReadUInt32(nIndex); if ((nIndex & ENHMETA_STOCK_OBJECT) == 0) { sal_uInt32 nPenStyle(0); sal_Int32 nPenWidth(0), nIgnored; mpInputStream->ReadUInt32(nPenStyle).ReadInt32(nPenWidth).ReadInt32(nIgnored); SAL_INFO("emfio", "\t\tIndex: " << nIndex << " Style: 0x" << std::hex << nPenStyle << std::dec << " PenWidth: " << nPenWidth); if ((nPenStyle & PS_STYLE_MASK) > PS_INSIDEFRAME) nPenStyle = PS_COSMETIC; if ((nPenStyle & PS_GEOMETRIC) == 0) nPenWidth = 0; CreateObjectIndexed(nIndex, std::make_unique(ReadColor(), nPenStyle, nPenWidth)); } } break; case EMR_EXTCREATEPEN: { mpInputStream->ReadUInt32(nIndex); if ((nIndex & ENHMETA_STOCK_OBJECT) == 0) { sal_uInt32 offBmi, cbBmi, offBits, cbBits, nPenStyle, nWidth, nBrushStyle, elpNumEntries; sal_Int32 elpHatch; mpInputStream->ReadUInt32(offBmi).ReadUInt32(cbBmi).ReadUInt32(offBits).ReadUInt32(cbBits); mpInputStream->ReadUInt32(nPenStyle).ReadUInt32(nWidth).ReadUInt32(nBrushStyle); Color aColorRef = ReadColor(); mpInputStream->ReadInt32(elpHatch).ReadUInt32(elpNumEntries); if (!mpInputStream->good()) bStatus = false; else { SAL_INFO("emfio", "\t\tStyle: 0x" << std::hex << nPenStyle << std::dec); if ((nPenStyle & PS_STYLE_MASK) > PS_INSIDEFRAME) nPenStyle = PS_COSMETIC; if ((nPenStyle & PS_GEOMETRIC) == 0) nWidth = 0; SAL_INFO("emfio", "\t\tWidth: " << nWidth); CreateObjectIndexed(nIndex, std::make_unique(aColorRef, nPenStyle, nWidth)); } } } break; case EMR_CREATEBRUSHINDIRECT : { mpInputStream->ReadUInt32( nIndex ); if ( ( nIndex & ENHMETA_STOCK_OBJECT ) == 0 ) { sal_uInt32 nStyle; mpInputStream->ReadUInt32( nStyle ); BrushStyle eStyle = static_cast(nStyle); CreateObjectIndexed(nIndex, std::make_unique( ReadColor(), ( eStyle == BrushStyle::BS_HOLLOW ) )); } } break; case EMR_DELETEOBJECT : { mpInputStream->ReadUInt32( nIndex ); if ( ( nIndex & ENHMETA_STOCK_OBJECT ) == 0 ) DeleteObject( nIndex ); } break; case EMR_ELLIPSE : { mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ).ReadInt32( nx32 ).ReadInt32( ny32 ); SAL_INFO("emfio", "\t\t Rectangle, left: " << nX32 << ", top: " << nY32 << ", right: " << nx32 << ", bottom: " << ny32); sal_Int32 w(0), h(0); if (o3tl::checked_sub(nx32, nX32, w) || o3tl::checked_sub(ny32, nY32, h)) SAL_WARN("emfio", "broken ellipse"); else { tools::Long dw = w / 2; tools::Long dh = h / 2; Point aCenter( nX32 + dw, nY32 + dh ); tools::Polygon aPoly( aCenter, dw, dh ); DrawPolygon( std::move(aPoly), mbRecordPath ); } } break; case EMR_RECTANGLE : { mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ).ReadInt32( nx32 ).ReadInt32( ny32 ); SAL_INFO("emfio", "\t\t Rectangle, left: " << nX32 << ", top: " << nY32 << ", right: " << nx32 << ", bottom: " << ny32); Point aPoints[] { Point(nX32, nY32), Point(nx32, nY32), Point(nx32, ny32), Point(nX32, ny32) }; tools::Polygon aPoly(4, aPoints); aPoly.Optimize( PolyOptimizeFlags::CLOSE ); DrawPolygon( std::move(aPoly), mbRecordPath ); } break; case EMR_ROUNDRECT : { mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ).ReadInt32( nx32 ).ReadInt32( ny32 ).ReadUInt32( nW ).ReadUInt32( nH ); tools::Polygon aRoundRectPoly( ReadRectangle( nX32, nY32, nx32, ny32 ), nW, nH ); DrawPolygon( std::move(aRoundRectPoly), mbRecordPath ); } break; case EMR_ARC : case EMR_ARCTO : case EMR_CHORD : { sal_Int32 nStartX, nStartY, nEndX, nEndY; mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ).ReadInt32( nx32 ).ReadInt32( ny32 ).ReadInt32( nStartX ).ReadInt32( nStartY ).ReadInt32( nEndX ).ReadInt32( nEndY ); if (!mpInputStream->good()) bStatus = false; else { SAL_INFO( "emfio", "\t\t Bounds: " << nX32 << ":" << nY32 << ", " << nx32 << ":" << ny32 << ", Start: " << nStartX << ":" << nStartY << ", End: " << nEndX << ":" << nEndY ); tools::Polygon aPoly(ReadRectangle(nX32, nY32, nx32, ny32), Point(nStartX, nStartY), Point(nEndX, nEndY), PolyStyle::Arc, IsArcDirectionClockWise()); if ( nRecType == EMR_CHORD ) DrawPolygon( std::move(aPoly), mbRecordPath ); else DrawPolyLine( std::move(aPoly), nRecType == EMR_ARCTO, mbRecordPath ); } } break; case EMR_PIE : { sal_Int32 nStartX, nStartY, nEndX, nEndY; mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ).ReadInt32( nx32 ).ReadInt32( ny32 ).ReadInt32( nStartX ).ReadInt32( nStartY ).ReadInt32( nEndX ).ReadInt32( nEndY ); if (!mpInputStream->good()) bStatus = false; else { tools::Polygon aPoly(ReadRectangle(nX32, nY32, nx32, ny32), Point(nStartX, nStartY), Point(nEndX, nEndY), PolyStyle::Pie, IsArcDirectionClockWise()); DrawPolygon( std::move(aPoly), mbRecordPath ); } } break; case EMR_LINETO : { mpInputStream->ReadInt32( nX32 ).ReadInt32( nY32 ); LineTo( Point( nX32, nY32 ), mbRecordPath); } break; case EMR_BEGINPATH : { ClearPath(); mbRecordPath = true; } break; case EMR_ABORTPATH : ClearPath(); [[fallthrough]]; case EMR_ENDPATH : mbRecordPath = false; break; case EMR_CLOSEFIGURE : ClosePath(); break; case EMR_FILLPATH : StrokeAndFillPath( false, true ); break; case EMR_STROKEANDFILLPATH : StrokeAndFillPath( true, true ); break; case EMR_STROKEPATH : StrokeAndFillPath( true, false ); break; case EMR_SELECTCLIPPATH : { sal_Int32 nClippingMode(0); mpInputStream->ReadInt32(nClippingMode); SetClipPath(GetPathObj(), static_cast(nClippingMode), true); } break; case EMR_EXTSELECTCLIPRGN : { sal_uInt32 nRemainingRecSize = nRecSize - 8; if (nRemainingRecSize < 8) bStatus = false; else { sal_Int32 nClippingMode(0), cbRgnData(0); mpInputStream->ReadInt32(cbRgnData); mpInputStream->ReadInt32(nClippingMode); nRemainingRecSize -= 8; // This record's region data should be ignored if mode // is RGN_COPY - see EMF spec section 2.3.2.2 if (static_cast(nClippingMode) == RegionMode::RGN_COPY) { SetDefaultClipPath(); } else { basegfx::B2DPolyPolygon aPolyPoly; if (cbRgnData) ImplReadRegion(aPolyPoly, *mpInputStream, nRemainingRecSize, GetWinOrg()); const tools::PolyPolygon aPolyPolygon(aPolyPoly); SetClipPath(aPolyPolygon, static_cast(nClippingMode), false); } } } break; case EMR_ALPHABLEND: { sal_Int32 xDest(0), yDest(0), cxDest(0), cyDest(0); BLENDFUNCTION aFunc; sal_Int32 xSrc(0), ySrc(0), cxSrc(0), cySrc(0); XForm xformSrc; sal_uInt32 BkColorSrc(0), iUsageSrc(0), offBmiSrc(0); sal_uInt32 cbBmiSrc(0), offBitsSrc(0), cbBitsSrc(0); sal_uInt64 nStart = mpInputStream->Tell() - 8; mpInputStream->SeekRel( 0x10 ); mpInputStream->ReadInt32( xDest ).ReadInt32( yDest ).ReadInt32( cxDest ).ReadInt32( cyDest ); *mpInputStream >> aFunc; mpInputStream->ReadInt32( xSrc ).ReadInt32( ySrc ); *mpInputStream >> xformSrc; mpInputStream->ReadUInt32( BkColorSrc ).ReadUInt32( iUsageSrc ).ReadUInt32( offBmiSrc ).ReadUInt32( cbBmiSrc ) .ReadUInt32( offBitsSrc ).ReadUInt32( cbBitsSrc ).ReadInt32( cxSrc ).ReadInt32( cySrc ) ; if ( !mpInputStream->good() || (cbBitsSrc > (SAL_MAX_UINT32 - 14)) || ((SAL_MAX_UINT32 - 14) - cbBitsSrc < cbBmiSrc) || cxDest == SAL_MAX_INT32 || cyDest == SAL_MAX_INT32 ) { bStatus = false; } else { tools::Rectangle aRect(Point(xDest, yDest), Size(cxDest + 1, cyDest + 1)); const sal_uInt32 nSourceSize = cbBmiSrc + cbBitsSrc + 14; bool bSafeRead = nSourceSize <= (mnEndPos - mnStartPos); sal_uInt32 nDeltaToDIB5HeaderSize(0); const bool bReadAlpha(0x01 == aFunc.aAlphaFormat); if (bSafeRead && bReadAlpha) { // we need to read alpha channel data if AlphaFormat of BLENDFUNCTION is // AC_SRC_ALPHA (==0x01). To read it, create a temp DIB-File which is ready // for DIB-5 format const sal_uInt32 nHeaderSize = getDIBV5HeaderSize(); if (cbBmiSrc > nHeaderSize) bSafeRead = false; else nDeltaToDIB5HeaderSize = nHeaderSize - cbBmiSrc; } if (bSafeRead) { const sal_uInt32 nTargetSize(cbBmiSrc + nDeltaToDIB5HeaderSize + cbBitsSrc + 14); char* pBuf = new char[ nTargetSize ]; SvMemoryStream aTmp( pBuf, nTargetSize, StreamMode::READ | StreamMode::WRITE ); aTmp.ObjectOwnsMemory( true ); // write BM-Header (14 bytes) aTmp.WriteUChar( 'B' ) .WriteUChar( 'M' ) .WriteUInt32( cbBitsSrc ) .WriteUInt16( 0 ) .WriteUInt16( 0 ) .WriteUInt32( cbBmiSrc + nDeltaToDIB5HeaderSize + 14 ); // copy DIBInfoHeader from source (cbBmiSrc bytes) mpInputStream->Seek( nStart + offBmiSrc ); char* pWritePos = pBuf + 14; auto nRead = mpInputStream->ReadBytes(pWritePos, cbBmiSrc); if (nRead != cbBmiSrc) { // zero remainder if short read memset(pWritePos + nRead, 0, cbBmiSrc - nRead); } if (bReadAlpha) { // need to add values for all stuff that DIBV5Header is bigger // than DIBInfoHeader, all values are correctly initialized to zero, // so we can use memset here memset(pBuf + cbBmiSrc + 14, 0, nDeltaToDIB5HeaderSize); } // copy bitmap data from source (offBitsSrc bytes) mpInputStream->Seek( nStart + offBitsSrc ); pWritePos = pBuf + 14 + nDeltaToDIB5HeaderSize + cbBmiSrc; nRead = mpInputStream->ReadBytes(pWritePos, cbBitsSrc); if (nRead != cbBitsSrc) { // zero remainder if short read memset(pWritePos + nRead, 0, cbBitsSrc - nRead); } aTmp.Seek( 0 ); // prepare to read and fill BitmapEx BitmapEx aBitmapEx; if(bReadAlpha) { Bitmap aBitmap; AlphaMask aAlpha; if(ReadDIBV5(aBitmap, aAlpha, aTmp)) { aBitmapEx = BitmapEx(aBitmap, aAlpha); } } else { Bitmap aBitmap; if(ReadDIB(aBitmap, aTmp, true)) { if(0xff != aFunc.aSrcConstantAlpha) { // add const alpha channel aBitmapEx = BitmapEx( aBitmap, AlphaMask(aBitmap.GetSizePixel(), &aFunc.aSrcConstantAlpha)); } else { // just use Bitmap aBitmapEx = BitmapEx(aBitmap); } } } if(!aBitmapEx.IsEmpty()) { // test if it is sensible to crop if (cxSrc > 0 && cySrc > 0 && xSrc >= 0 && ySrc >= 0) { sal_Int32 xEndSrc; sal_Int32 yEndSrc; if (!o3tl::checked_add(xSrc, cxSrc, xEndSrc) && xEndSrc < aBitmapEx.GetSizePixel().Width() && !o3tl::checked_add(ySrc, cySrc, yEndSrc) && yEndSrc < aBitmapEx.GetSizePixel().Height()) { const tools::Rectangle aCropRect( Point( xSrc, ySrc ), Size( cxSrc, cySrc ) ); aBitmapEx.Crop( aCropRect ); } } #ifdef DBG_UTIL static bool bDoSaveForVisualControl(false); // loplugin:constvars:ignore if(bDoSaveForVisualControl) { // VCL_DUMP_BMP_PATH should be like C:/path/ or ~/path/ static const OUString sDumpPath(OUString::createFromAscii(std::getenv("VCL_DUMP_BMP_PATH"))); if(!sDumpPath.isEmpty()) { SvFileStream aNew(sDumpPath + "metafile_content.png", StreamMode::WRITE | StreamMode::TRUNC); vcl::PngImageWriter aPNGWriter(aNew); aPNGWriter.write(aBitmapEx); } } #endif maBmpSaveList.emplace_back(aBitmapEx, aRect, SRCAND|SRCINVERT); } } } } break; case EMR_BITBLT : // PASSTHROUGH INTENDED case EMR_STRETCHBLT : { sal_Int32 xDest, yDest, cxDest, cyDest, xSrc, ySrc, cxSrc, cySrc; sal_uInt32 dwRop, iUsageSrc, offBmiSrc, cbBmiSrc, offBitsSrc, cbBitsSrc; XForm xformSrc; sal_uInt64 nStart = mpInputStream->Tell() - 8; mpInputStream->SeekRel( 0x10 ); mpInputStream->ReadInt32( xDest ).ReadInt32( yDest ).ReadInt32( cxDest ).ReadInt32( cyDest ).ReadUInt32( dwRop ).ReadInt32( xSrc ).ReadInt32( ySrc ) >> xformSrc; mpInputStream->ReadUInt32( nColor ).ReadUInt32( iUsageSrc ).ReadUInt32( offBmiSrc ).ReadUInt32( cbBmiSrc ) .ReadUInt32( offBitsSrc ).ReadUInt32( cbBitsSrc ); if ( nRecType == EMR_STRETCHBLT ) mpInputStream->ReadInt32( cxSrc ).ReadInt32( cySrc ); else cxSrc = cySrc = 0; if (!mpInputStream->good() || (cbBitsSrc > (SAL_MAX_UINT32 - 14)) || ((SAL_MAX_UINT32 - 14) - cbBitsSrc < cbBmiSrc)) bStatus = false; else { Bitmap aBitmap; tools::Rectangle aRect(Point(xDest, yDest), Size(cxDest, cyDest)); sal_uInt32 nSize = cbBmiSrc + cbBitsSrc + 14; if ( nSize <= ( mnEndPos - mnStartPos ) ) { char* pBuf = new char[ nSize ]; SvMemoryStream aTmp( pBuf, nSize, StreamMode::READ | StreamMode::WRITE ); aTmp.ObjectOwnsMemory( true ); aTmp.WriteUChar( 'B' ) .WriteUChar( 'M' ) .WriteUInt32( cbBitsSrc ) .WriteUInt16( 0 ) .WriteUInt16( 0 ) .WriteUInt32( cbBmiSrc + 14 ); mpInputStream->Seek( nStart + offBmiSrc ); char* pWritePos = pBuf + 14; auto nRead = mpInputStream->ReadBytes(pWritePos, cbBmiSrc); if (nRead != cbBmiSrc) { // zero remainder if short read memset(pWritePos + nRead, 0, cbBmiSrc - nRead); } mpInputStream->Seek( nStart + offBitsSrc ); pWritePos = pBuf + 14 + cbBmiSrc; nRead = mpInputStream->ReadBytes(pWritePos, cbBitsSrc); if (nRead != cbBitsSrc) { // zero remainder if short read memset(pWritePos + nRead, 0, cbBitsSrc - nRead); } aTmp.Seek( 0 ); ReadDIB(aBitmap, aTmp, true); // test if it is sensible to crop if ( (cxSrc > 0) && (cySrc > 0) && (xSrc >= 0) && (ySrc >= 0) && (aBitmap.GetSizePixel().Width() >= cxSrc) && (xSrc <= aBitmap.GetSizePixel().Width() - cxSrc) && (aBitmap.GetSizePixel().Height() >= cySrc) && (ySrc <= aBitmap.GetSizePixel().Height() - cySrc) ) { tools::Rectangle aCropRect( Point( xSrc, ySrc ), Size( cxSrc, cySrc ) ); aBitmap.Crop( aCropRect ); } maBmpSaveList.emplace_back(aBitmap, aRect, dwRop); } } } break; case EMR_STRETCHDIBITS : { sal_Int32 xDest, yDest, xSrc, ySrc, cxSrc, cySrc, cxDest, cyDest; sal_uInt32 offBmiSrc, cbBmiSrc, offBitsSrc, cbBitsSrc, iUsageSrc, dwRop; sal_uInt64 nStart = mpInputStream->Tell() - 8; mpInputStream->SeekRel( 0x10 ); mpInputStream->ReadInt32( xDest ) .ReadInt32( yDest ) .ReadInt32( xSrc ) .ReadInt32( ySrc ) .ReadInt32( cxSrc ) .ReadInt32( cySrc ) .ReadUInt32( offBmiSrc ) .ReadUInt32( cbBmiSrc ) .ReadUInt32( offBitsSrc ) .ReadUInt32( cbBitsSrc ) .ReadUInt32( iUsageSrc ) .ReadUInt32( dwRop ) .ReadInt32( cxDest ) .ReadInt32( cyDest ); if (!mpInputStream->good() || ((SAL_MAX_UINT32 - 14) < cbBitsSrc) || ((SAL_MAX_UINT32 - 14) - cbBitsSrc < cbBmiSrc)) { bStatus = false; } else { Bitmap aBitmap; tools::Rectangle aRect(xDest, yDest); aRect.SaturatingSetSize(Size(cxDest, cyDest)); sal_uInt32 nSize = cbBmiSrc + cbBitsSrc + 14; if ( nSize <= ( mnEndPos - mnStartPos ) ) { char* pBuf = new char[ nSize ]; SvMemoryStream aTmp( pBuf, nSize, StreamMode::READ | StreamMode::WRITE ); aTmp.ObjectOwnsMemory( true ); aTmp.WriteUChar( 'B' ) .WriteUChar( 'M' ) .WriteUInt32( cbBitsSrc ) .WriteUInt16( 0 ) .WriteUInt16( 0 ) .WriteUInt32( cbBmiSrc + 14 ); mpInputStream->Seek( nStart + offBmiSrc ); char* pWritePos = pBuf + 14; auto nRead = mpInputStream->ReadBytes(pWritePos, cbBmiSrc); if (nRead != cbBmiSrc) { // zero remainder if short read memset(pWritePos + nRead, 0, cbBmiSrc - nRead); } mpInputStream->Seek( nStart + offBitsSrc ); pWritePos = pBuf + 14 + cbBmiSrc; nRead = mpInputStream->ReadBytes(pWritePos, cbBitsSrc); if (nRead != cbBitsSrc) { // zero remainder if short read memset(pWritePos + nRead, 0, cbBitsSrc - nRead); } aTmp.Seek( 0 ); ReadDIB(aBitmap, aTmp, true); const tools::Long nWidthDiff = aBitmap.GetSizePixel().Width() - cxSrc; const tools::Long nHeightDiff = aBitmap.GetSizePixel().Height() - cySrc; // test if it is sensible to crop if ( (cxSrc > 0) && (cySrc > 0) && (xSrc >= 0) && (ySrc >= 0) && (xSrc <= nWidthDiff) && (ySrc <= nHeightDiff) ) { tools::Rectangle aCropRect( Point( xSrc, ySrc ), Size( cxSrc, cySrc ) ); aBitmap.Crop( aCropRect ); } maBmpSaveList.emplace_back(aBitmap, aRect, dwRop); } } } break; case EMR_EXTCREATEFONTINDIRECTW : { mpInputStream->ReadUInt32( nIndex ); if ( ( nIndex & ENHMETA_STOCK_OBJECT ) == 0 ) { LOGFONTW aLogFont; mpInputStream->ReadInt32( aLogFont.lfHeight ) .ReadInt32( aLogFont.lfWidth ) .ReadInt32( aLogFont.lfEscapement ) .ReadInt32( aLogFont.lfOrientation ) .ReadInt32( aLogFont.lfWeight ) .ReadUChar( aLogFont.lfItalic ) .ReadUChar( aLogFont.lfUnderline ) .ReadUChar( aLogFont.lfStrikeOut ) .ReadUChar( aLogFont.lfCharSet ) .ReadUChar( aLogFont.lfOutPrecision ) .ReadUChar( aLogFont.lfClipPrecision ) .ReadUChar( aLogFont.lfQuality ) .ReadUChar( aLogFont.lfPitchAndFamily ); sal_Unicode lfFaceName[LF_FACESIZE+1]; lfFaceName[LF_FACESIZE] = 0; for (int i = 0; i < LF_FACESIZE; ++i) { sal_uInt16 nChar(0); mpInputStream->ReadUInt16(nChar); lfFaceName[i] = nChar; } aLogFont.alfFaceName = OUString( lfFaceName ); // #i123216# Not used in the test case of #121382# (always identity in XForm), also // no hints in ms docu if FontSize should be scaled with WT. Using with the example // from #i123216# creates errors, so removing. // // #i121382# Need to apply WorldTransform to FontHeight/Width; this should be completely // // changed to basegfx::B2DHomMatrix instead of 'struct XForm', but not now due to time // // constraints and dangers // const XForm& rXF = GetWorldTransform(); // const basegfx::B2DHomMatrix aWT(rXF.eM11, rXF.eM21, rXF.eDx, rXF.eM12, rXF.eM22, rXF.eDy); // const basegfx::B2DVector aTransVec(aWT * basegfx::B2DVector(aLogFont.lfWidth, aLogFont.lfHeight)); // aLogFont.lfWidth = aTransVec.getX(); // aLogFont.lfHeight = aTransVec.getY(); if (mpInputStream->good() && aLogFont.lfHeight != SAL_MIN_INT32 && aLogFont.lfWidth != SAL_MIN_INT32) { CreateObjectIndexed(nIndex, std::make_unique( aLogFont )); } } } break; case EMR_POLYTEXTOUTA : case EMR_EXTTEXTOUTA : bFlag = true; [[fallthrough]]; case EMR_POLYTEXTOUTW : case EMR_EXTTEXTOUTW : { sal_Int32 nLeft, nTop, nRight, nBottom; sal_uInt32 nGfxMode; float nXScale, nYScale; sal_uInt32 ncStrings( 1 ); sal_Int32 ptlReferenceX, ptlReferenceY; sal_uInt32 nLen, nOffString, nOptions, offDx; sal_Int32 nLeftRect, nTopRect, nRightRect, nBottomRect; nCurPos = mpInputStream->Tell() - 8; mpInputStream->ReadInt32( nLeft ).ReadInt32( nTop ).ReadInt32( nRight ).ReadInt32( nBottom ) .ReadUInt32( nGfxMode ).ReadFloat( nXScale ).ReadFloat( nYScale ); SAL_INFO("emfio", "\t\tBounds: " << nLeft << ", " << nTop << ", " << nRight << ", " << nBottom); SAL_INFO("emfio", "\t\tiGraphicsMode: 0x" << std::hex << nGfxMode << std::dec); SAL_INFO("emfio", "\t\t Scale: " << nXScale << " x " << nYScale); if ( ( nRecType == EMR_POLYTEXTOUTA ) || ( nRecType == EMR_POLYTEXTOUTW ) ) { mpInputStream->ReadUInt32( ncStrings ); SAL_INFO("emfio", "\t\t Number of Text objects: " << ncStrings); if ( ncStrings == 0 ) break; } mpInputStream->ReadInt32( ptlReferenceX ).ReadInt32( ptlReferenceY ).ReadUInt32( nLen ).ReadUInt32( nOffString ).ReadUInt32( nOptions ); SAL_INFO("emfio", "\t\tReference: (" << ptlReferenceX << ", " << ptlReferenceY << ")"); mpInputStream->ReadInt32( nLeftRect ).ReadInt32( nTopRect ).ReadInt32( nRightRect ).ReadInt32( nBottomRect ); mpInputStream->ReadUInt32( offDx ); if (!mpInputStream->good()) bStatus = false; else { const tools::Rectangle aRect( nLeftRect, nTopRect, nRightRect, nBottomRect ); const BackgroundMode mnBkModeBackup = mnBkMode; if ( nOptions & ETO_NO_RECT ) // Don't draw the background rectangle and text background mnBkMode = BackgroundMode::Transparent; else if ( nOptions & ETO_OPAQUE ) DrawRectWithBGColor( aRect ); // ETO_RTLREADING indicates that the characters are laid from right to left vcl::text::ComplexTextLayoutFlags nTextLayoutMode = vcl::text::ComplexTextLayoutFlags::Default; if ( nOptions & ETO_RTLREADING ) nTextLayoutMode = vcl::text::ComplexTextLayoutFlags::BiDiRtl | vcl::text::ComplexTextLayoutFlags::TextOriginLeft; SetTextLayoutMode( nTextLayoutMode ); SAL_WARN_IF( ( nOptions & ( ETO_PDY | ETO_GLYPH_INDEX ) ) != 0, "emfio", "SJ: ETO_PDY || ETO_GLYPH_INDEX in EMF" ); Point aPos( ptlReferenceX, ptlReferenceY ); bool bOffStringSane = nOffString <= mnEndPos - nCurPos; if ( bOffStringSane ) { mpInputStream->Seek( nCurPos + nOffString ); OUString aText; if ( bFlag ) { if ( nLen <= ( mnEndPos - mpInputStream->Tell() ) ) { std::vector pBuf( nLen ); mpInputStream->ReadBytes(pBuf.data(), nLen); aText = OUString(pBuf.data(), nLen, GetCharSet()); } } else { if ( ( nLen * sizeof(sal_Unicode) ) <= ( mnEndPos - mpInputStream->Tell() ) ) { aText = read_uInt16s_ToOUString(*mpInputStream, nLen); } } SAL_INFO("emfio", "\t\tText: " << aText); SAL_INFO("emfio", "\t\tDxBuffer:"); KernArray aDXAry; std::unique_ptr pDYAry; sal_Int32 nDxSize; sal_Int32 nBytesEach; // Reading OutputDx // ETO_PDY flag indicates that we should read twice values // compared to the number of characters in the output string. // Values are stored in an array of 32-bit unsigned integers // named OutputDx, so there will be either 8 bytes or 4 bytes // each depending on ETO_PDY is set or not. if (nOptions & ETO_PDY) nBytesEach = 8; else nBytesEach = 4; bool bOverflow = o3tl::checked_multiply(nLen, nBytesEach, nDxSize); if (!bOverflow && offDx && ((nCurPos + offDx + nDxSize) <= nNextPos ) && nNextPos <= mnEndPos) { mpInputStream->Seek( nCurPos + offDx ); aDXAry.resize(aText.getLength()); if (nOptions & ETO_PDY) { pDYAry.reset( new tools::Long[aText.getLength()] ); } for (sal_Int32 i = 0; i < aText.getLength(); ++i) { sal_Int32 nDxCount = 1; if ( static_cast( aText.getLength() ) != nLen ) { sal_Unicode cUniChar = aText[i]; OString aTmp(&cUniChar, 1, GetCharSet()); if (aTmp.getLength() > 1) { nDxCount = aTmp.getLength(); } } aDXAry.set(i, 0); if (nOptions & ETO_PDY) { pDYAry[i] = 0; } while (nDxCount--) { sal_Int32 nDxTmp = 0; mpInputStream->ReadInt32(nDxTmp); aDXAry.set(i, o3tl::saturating_add(aDXAry[i], nDxTmp)); if (nOptions & ETO_PDY) { sal_Int32 nDyTmp = 0; mpInputStream->ReadInt32(nDyTmp); pDYAry[i] += nDyTmp; } } SAL_INFO("emfio", "\t\t\tSpacing " << i << ": " << aDXAry[i]); } } if ( nOptions & ETO_CLIPPED ) { Push(); // Save the current clip. It will be restored after text drawing IntersectClipRect( aRect ); } DrawText(aPos, aText, aDXAry.empty() ? nullptr : &aDXAry, pDYAry.get(), mbRecordPath, static_cast(nGfxMode)); if ( nOptions & ETO_CLIPPED ) Pop(); } mnBkMode = mnBkModeBackup; } } break; case EMR_POLYBEZIERTO16 : DrawPolyBezier(ReadPolygonWithSkip(true, nNextPos), true, mbRecordPath); break; case EMR_POLYBEZIER16 : DrawPolyBezier(ReadPolygonWithSkip(false, nNextPos), false, mbRecordPath); break; case EMR_POLYGON16 : DrawPolygon(ReadPolygonWithSkip(false, nNextPos), mbRecordPath); break; case EMR_POLYLINETO16 : DrawPolyLine(ReadPolygonWithSkip(true, nNextPos), true, mbRecordPath); break; case EMR_POLYLINE16 : DrawPolyLine(ReadPolygonWithSkip(false, nNextPos), false, mbRecordPath); break; case EMR_POLYPOLYLINE16 : ReadAndDrawPolyLine(nNextPos); break; case EMR_POLYPOLYGON16 : ReadAndDrawPolyPolygon(nNextPos); break; case EMR_FILLRGN : { sal_uInt32 nRemainingRecSize = nRecSize - 8; if (nRemainingRecSize < 24) bStatus = false; else { sal_uInt32 nRgnDataSize; basegfx::B2DPolyPolygon aPolyPoly; mpInputStream->SeekRel(16); // RectL bounds mpInputStream->ReadUInt32( nRgnDataSize ).ReadUInt32( nIndex ); nRemainingRecSize -= 24; if (ImplReadRegion(aPolyPoly, *mpInputStream, nRemainingRecSize, GetWinOrg())) { Push(); SelectObject( nIndex ); tools::PolyPolygon aPolyPolygon(aPolyPoly); DrawPolyPolygon( aPolyPolygon ); Pop(); } } } break; case EMR_PAINTRGN : { sal_uInt32 nRemainingRecSize = nRecSize - 8; if (nRemainingRecSize < 20) bStatus = false; else { sal_uInt32 nRgnDataSize; basegfx::B2DPolyPolygon aPolyPoly; mpInputStream->SeekRel(16); // Skipping RectL bounds mpInputStream->ReadUInt32( nRgnDataSize ); nRemainingRecSize -= 20; if (ImplReadRegion(aPolyPoly, *mpInputStream, nRemainingRecSize, GetWinOrg())) { tools::PolyPolygon aPolyPolygon(aPolyPoly); DrawPolyPolygon( aPolyPolygon ); } } } break; case EMR_CREATEDIBPATTERNBRUSHPT : { sal_uInt64 nStart = mpInputStream->Tell() - 8; Bitmap aBitmap; mpInputStream->ReadUInt32( nIndex ); if ( ( nIndex & ENHMETA_STOCK_OBJECT ) == 0 ) { sal_uInt32 usage, offBmi, cbBmi, offBits, cbBits; mpInputStream->ReadUInt32( usage ); mpInputStream->ReadUInt32( offBmi ); mpInputStream->ReadUInt32( cbBmi ); mpInputStream->ReadUInt32( offBits ); mpInputStream->ReadUInt32( cbBits ); if ( !mpInputStream->good() || (cbBits > (SAL_MAX_UINT32 - 14)) || ((SAL_MAX_UINT32 - 14) - cbBits < cbBmi) ) bStatus = false; else if ( offBmi ) { sal_uInt32 nSize = cbBmi + cbBits + 14; if ( nSize <= ( mnEndPos - mnStartPos ) ) { char* pBuf = new char[ nSize ]; SvMemoryStream aTmp( pBuf, nSize, StreamMode::READ | StreamMode::WRITE ); aTmp.ObjectOwnsMemory( true ); aTmp.WriteUChar( 'B' ) .WriteUChar( 'M' ) .WriteUInt32( cbBits ) .WriteUInt16( 0 ) .WriteUInt16( 0 ) .WriteUInt32( cbBmi + 14 ); mpInputStream->Seek( nStart + offBmi ); char* pWritePos = pBuf + 14; auto nRead = mpInputStream->ReadBytes(pWritePos, cbBmi); if (nRead != cbBmi) { // zero remainder if short read memset(pWritePos + nRead, 0, cbBmi - nRead); } mpInputStream->Seek( nStart + offBits ); pWritePos = pBuf + 14 + cbBmi; nRead = mpInputStream->ReadBytes(pWritePos, cbBits); if (nRead != cbBits) { // zero remainder if short read memset(pWritePos + nRead, 0, cbBits - nRead); } aTmp.Seek( 0 ); ReadDIB(aBitmap, aTmp, true); } } } CreateObjectIndexed(nIndex, std::make_unique( aBitmap )); } break; case EMR_MASKBLT : case EMR_PLGBLT : case EMR_SETDIBITSTODEVICE : case EMR_FRAMERGN : case EMR_INVERTRGN : case EMR_FLATTENPATH : case EMR_WIDENPATH : case EMR_SETPALETTEENTRIES : case EMR_RESIZEPALETTE : case EMR_EXTFLOODFILL : case EMR_ANGLEARC : case EMR_SETCOLORADJUSTMENT : case EMR_POLYDRAW16 : case EMR_CREATECOLORSPACE : case EMR_SETCOLORSPACE : case EMR_DELETECOLORSPACE : case EMR_GLSRECORD : case EMR_GLSBOUNDEDRECORD : case EMR_PIXELFORMAT : case EMR_DRAWESCAPE : case EMR_EXTESCAPE : case EMR_STARTDOC : case EMR_SMALLTEXTOUT : case EMR_FORCEUFIMAPPING : case EMR_NAMEDESCAPE : case EMR_COLORCORRECTPALETTE : case EMR_SETICMPROFILEA : case EMR_SETICMPROFILEW : case EMR_TRANSPARENTBLT : case EMR_TRANSPARENTDIB : case EMR_GRADIENTFILL : case EMR_SETLINKEDUFIS : case EMR_SETMAPPERFLAGS : case EMR_SETICMMODE : case EMR_CREATEMONOBRUSH : case EMR_SETBRUSHORGEX : case EMR_SETMETARGN : case EMR_SETMITERLIMIT : case EMR_EXCLUDECLIPRECT : case EMR_REALIZEPALETTE : case EMR_SELECTPALETTE : case EMR_CREATEPALETTE : case EMR_ALPHADIBBLEND : case EMR_SETTEXTJUSTIFICATION : { SAL_WARN("emfio", "TODO: EMF record not implemented: " << record_type_name(nRecType)); } break; case EMR_COMMENT : case EMR_HEADER : // has already been read at ReadHeader() break; default : SAL_INFO("emfio", "Unknown Meta Action"); break; } } mpInputStream->Seek( nNextPos ); } // tdf#127471 maScaledFontHelper.applyAlternativeFontScale(); if( !maBmpSaveList.empty() ) ResolveBitmapActions( maBmpSaveList ); if ( bStatus ) mpInputStream->Seek(mnEndPos); return bStatus; }; bool EmfReader::ReadHeader() { // Spare me the METAFILEHEADER here // Reading the METAHEADER - EMR_HEADER ([MS-EMF] section 2.3.4.2 EMR_HEADER Record Types) sal_uInt32 nType(0), nHeaderSize(0); mpInputStream->ReadUInt32(nType).ReadUInt32(nHeaderSize); SAL_INFO ("emfio", "0x0-0x" << std::hex << nHeaderSize << " " << record_type_name(nType) << " size: " << std::dec << nHeaderSize); if (nType != 0x00000001) { // per [MS-EMF] 2.3.4.2 EMF Header Record Types, type MUST be 0x00000001 SAL_WARN("emfio", "EMF header type is not set to 0x00000001 - possibly corrupted file?"); return false; } // Start reading the EMR_HEADER Header object // bound size (RectL object, see [MS-WMF] section 2.2.2.19) SAL_INFO("emfio", "\tBounding rectangle"); tools::Rectangle rclBounds = ReadRectangle(); // rectangle in logical units // picture frame size (RectL object) SAL_INFO("emfio", "\tPicture frame"); tools::Rectangle rclFrame = ReadRectangle(); // rectangle in device units 1/100th mm sal_uInt32 nSignature(0); mpInputStream->ReadUInt32(nSignature); SAL_INFO("emfio", "\tSignature: 0x" << std::hex << nSignature << std::dec); // nSignature MUST be the ASCII characters "FME", see [WS-EMF] 2.2.9 Header Object // and 2.1.14 FormatSignature Enumeration if (nSignature != 0x464d4520) { SAL_WARN("emfio", "EMF\t\tSignature is not 0x464d4520 (\"FME\") - possibly corrupted file?"); return false; } sal_uInt32 nVersion(0); mpInputStream->ReadUInt32(nVersion); // according to [WS-EMF] 2.2.9, this SHOULD be 0x0001000, however // Microsoft note that not even Windows checks this... SAL_INFO("emfio", "\tVersion: 0x" << std::hex << nVersion << std::dec); if (nVersion != 0x00010000) { SAL_WARN("emfio", "EMF\t\tThis really should be 0x00010000, though not absolutely essential..."); } mpInputStream->ReadUInt32(mnEndPos); // size of metafile SAL_INFO("emfio", "\tMetafile size: " << mnEndPos); mnEndPos += mnStartPos; sal_uInt64 nStrmPos = mpInputStream->Tell(); // checking if mnEndPos is valid sal_uInt64 nActualFileSize = nStrmPos + mpInputStream->remainingSize(); if ( nActualFileSize < mnEndPos ) { SAL_WARN("emfio", "EMF\t\tEMF Header object records number of bytes as " << mnEndPos << ", however the file size is actually " << nActualFileSize << " bytes. Possible file corruption?"); mnEndPos = nActualFileSize; } mpInputStream->ReadUInt32(mnRecordCount); SAL_INFO("emfio", "\tRecords: " << mnRecordCount); // the number of "handles", or graphics objects used in the metafile sal_uInt16 nHandlesCount; mpInputStream->ReadUInt16(nHandlesCount); SAL_INFO("emfio", "\tGraphics: " << nHandlesCount); // the next 2 bytes are reserved, but according to [MS-EMF] section 2.2.9 // it MUST be 0x000 and MUST be ignored... the thing is, having such a specific // value is actually pretty useful in checking if there is possible corruption sal_uInt16 nReserved(0); mpInputStream->ReadUInt16(nReserved); SAL_INFO("emfio", "\tReserved: 0x" << std::hex << nReserved << std::dec); if ( nReserved != 0x0000 ) { SAL_WARN("emfio", "EMF\t\tEMF Header object's reserved field is NOT 0x0000... possible " "corruption?"); } // The next 4 bytes specifies the number of characters in the metafile description. // The 4 bytes after that specific the offset from this record that contains the // metafile description... zero means no description string. // For now, we ignore it. mpInputStream->SeekRel(0x8); sal_uInt32 nPalEntries(0); mpInputStream->ReadUInt32(nPalEntries); SAL_INFO("emfio", "\tPalette entries: " << nPalEntries); sal_Int32 nPixX(0), nPixY(0), nMillX(0), nMillY(0); mpInputStream->ReadInt32(nPixX); mpInputStream->ReadInt32(nPixY); SAL_INFO("emfio", "\tRef (pixels): " << nPixX << ", " << nPixY); mpInputStream->ReadInt32(nMillX); mpInputStream->ReadInt32(nMillY); SAL_INFO("emfio", "\tRef (mm): " << nMillX << ", " << nMillY); SetrclFrame(rclFrame); SetrclBounds(rclBounds); SetRefPix(Size( nPixX, nPixY ) ); SetRefMill(Size( nMillX, nMillY ) ); return checkSeek(*mpInputStream, mnStartPos + nHeaderSize); } tools::Rectangle EmfReader::ReadRectangle() { sal_Int32 nLeft(0), nTop(0), nRight(0), nBottom(0); mpInputStream->ReadInt32(nLeft); mpInputStream->ReadInt32(nTop); mpInputStream->ReadInt32(nRight); mpInputStream->ReadInt32(nBottom); SAL_INFO("emfio", "\t\tLeft: " << nLeft << ", top: " << nTop << ", right: " << nRight << ", bottom: " << nBottom); if (nLeft > nRight || nTop > nBottom) { SAL_WARN("emfio", "broken rectangle"); return tools::Rectangle::Normalize(Point(nLeft, nTop), Point(nRight, nBottom)); } return tools::Rectangle(nLeft, nTop, nRight, nBottom); } tools::Rectangle EmfReader::ReadRectangle( sal_Int32 x1, sal_Int32 y1, sal_Int32 x2, sal_Int32 y2 ) { Point aTL(x1, y1); Point aBR(o3tl::saturating_add(x2, -1), o3tl::saturating_add(y2, -1)); return tools::Rectangle(aTL, aBR); } } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */