/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */


module com { module sun { module star { module document {

/** describes properties of a document, regarding the relationship
    between the loaded document and the resource the document is
    loaded from / stored to.

    <p>
    This service may be represented by a com::sun::star::beans::PropertyValue[].
    Such descriptors will be passed to different functions, included into possible
    load/save processes. Every member of such process can use this descriptor
    and may change it if to actualize the information about the document.
    So this descriptor should be used as an in/out parameter.
    </p>

    <p>
    Note:<br>
    It's not allowed to hold member of this descriptor by references longer than they
    will be used (especially a possible stream). It's allowed to use it directly
    or by copying it only.
    </p>

    @see com::sun::star::beans::PropertyValue
 */
service MediaDescriptor
{
    /** May be set by filters or detection services if user has chosen to
        abort loading/saving, e.g. while entering a password.
     */
    [optional,property] boolean Aborted;

    /** document is a template

        <p>
        Loading a component of type "template" creates a new untitled document
        by default, but setting the "AsTemplate" property to `FALSE` loads the
        template document for editing. Setting "AsTemplate" to `TRUE` creates a
        new untitled document out of the loaded document, even if it has not
        a "template" type.
        </p>
     */
    [optional,property] boolean AsTemplate;

    /** the author of the document

        <p>
        Only for storing versions in components supporting versioning:
        author of version.
        </p>
     */
    [optional,property] string Author;

    /** identifier of used character set

        <p>
        Defines the character set for document formats that contain single
        byte characters (if necessary).
        </p>
     */
    [optional,property] string CharacterSet;

    /** description of document

        <p>
        Only for storing versions in components supporting versioning:
        comment (description) for stored version.
        </p>
     */
    [optional,property] string Comment;

    /** pack specific properties of caller

        <p>
        This is a parameter that can be used for any properties specific
        for a special component type. Format of that depends from real
        type of addressed component.
        </p>

        <p>
        For extensibility, it is recommended to use values of type
        sequence<com.sun.star.beans.NamedValue> with this property.
        </p>
     */
    [optional,property] any ComponentData;

    /** The base URL of the document to be used to resolve relative links.
     */
    [optional,property] string DocumentBaseURL;

    /** document title

        <p>
        This parameter can be used to specify a title for a document.
        </p>
     */
    [optional,property] string DocumentTitle;

    /** encryption information for encryption/decryption of documents

        <p>
        It contains the necessary information for encryption/decryption of
        a component (if necessary).
        If neither password nor encryption data is specified, loading of
        a password protected document will fail, storing will be done without
        encryption. If both are provided, the encryption data is used
        ( if the filter supports it ).
        </p>
        <p>
        The encryption data is generated based on the password.
        </p>
     */
    [optional,property] sequence< ::com::sun::star::beans::NamedValue > EncryptionData;

    /** same as MediaDescriptor::URL

        <p>
        It will be supported for compatibility reasons only.
        </p>

        @deprecated
     */
    [optional,property] string FileName;

    /** internal filter name

        <p>
        Name of a filter that should be used for loading or storing the component.
        Names must match the names of the TypeDetection configuration,
        invalid names are ignored. If a name is specified on loading,
        it still will be verified by a filter detection, but in case of doubt
        it will be preferred.

        See this page for a list of internal filter names: https://help.libreoffice.org/latest/en-US/text/shared/guide/convertfilters.html
        </p>
     */
    [optional,property] string FilterName;

    /** same as MediaDescriptor::FilterOptions

        <p>
        It will be supported for compatibility reasons only.
        </p>

        @deprecated
     */
    [optional,property] string FilterFlags;

    /** additional properties for filter

        <p>
        Some filters need additional parameters; use only together with property
        MediaDescriptor::FilterName. Details must be documented
        by the filter. This is an old format for some filters. If a string is not
        enough, filters can use the property MediaDescriptor::FilterData.
        </p>
     */
    [optional,property] string FilterOptions;

    /** additional properties for filter

        <p>
        This is a parameter that can be used for any properties specific
        for a special filter type. It should be used if
        MediaDescriptor::FilterOptions isn't enough.
        </p>
     */
    [optional,property] any FilterData;

    /** load document invisible

        <p>
        Defines if the loaded component is made visible. If this property is not
        specified, the component is made visible by default.
        </p>
     */
    [optional,property] boolean Hidden;

    /** The hierarchical path to the embedded document from topmost container.
     */
    [optional,property] string HierarchicalDocumentName;

    /** a stream to receive the document data.

        <p>
        If used when storing a document: writing must be done using this stream.
        If no stream is provided, the loader will create a stream by itself using
        the other properties. It is not allowed to keep a reference to this
        OutputStream after storing the component.
        </p>
     */
    [optional,property] com::sun::star::io::XOutputStream OutputStream;

    /** content of document

        <p>
        If used when loading a document: reading must be done using this stream.
        If no stream is provided, the loader will create a stream by itself using
        the other properties. It is not allowed to keep a reference to this
        InputStream after loading the component, and it would be useless, because
        in general an InputStream is usable for reading only once, except when it
        also implements the com::sun::star::io::XSeekable interface.
        </p>
     */
    [optional,property] com::sun::star::io::XInputStream InputStream;

    /** handle exceptional situations

        <p>
        Object implementing the com::sun::star::task::InteractionHandler
        service that is used to handle exceptional situations where proceeding with the task
        is impossible without additional information or impossible at all.
        The implemented API provides a default implementation for it that can handle many situations.
        If no InteractionHandler is set, a suitable exception is thrown.
        It is not allowed to keep a reference to this object, even not in the loaded
        or stored component's copy of the MediaDescriptor provided by its arguments attribute.
        </p>
     */
    [optional,property] com::sun::star::task::XInteractionHandler InteractionHandler;

    /** jump to a marked position after loading

        <p>
        This is the same as the text behind a "#" in a http URL. But
        this syntax with a "#" is not specified in most URL schemas.
        </p>
     */
    [optional,property] string JumpMark;

    /** specify mime type of content

        <p>
        Type of the medium to load, that must match to one of the types defined
        in the TypeDetection configuration (otherwise it's ignored).
        This bypasses the type detection of the com::sun::star::frame::Desktop environment,
        so passing a wrong MediaType will cause failure of loading.
        </p>
     */
    [optional,property] string MediaType;

    /** please use the corresponding parameters of this descriptor instead

        <p>
        String that summarizes some flags for loading. The string contains capital
        letters for the flags:<br>
        <table border=1>
            <tr>
                <td><strong>flag</strong></td>
                <td><strong>value</strong></td>
                <td><strong>replacement</strong></td>
            </tr>
            <tr>
                <td><em>ReadOnly</em></td>
                <td>R</td>
                <td>MediaDescriptor::ReadOnly</td>
            </tr>
            <tr>
                <td><em>Preview</em></td>
                <td>B</td>
                <td>MediaDescriptor::Preview</td>
            </tr>
            <tr>
                <td><em>AsTemplate</em></td>
                <td>T</td>
                <td>MediaDescriptor::AsTemplate</td>
            </tr>
            <tr>
                <td><em>Hidden</em></td>
                <td>H</td>
                <td>MediaDescriptor::Hidden</td>
            </tr>
        </table>
        </p>

        @deprecated
     */
    [optional,property] string OpenFlags;

    /** opens a new view for an already loaded document

        <p>
        Setting this to `TRUE` forces the component to create a new window on loading
        in any case. If the component supports multiple views, a second view is
        opened, if not, the component is loaded one more time. Otherwise the behavior
        depends on the default window handling of the com::sun::star::frame::Desktop environment.
        </p>
     */
    [optional,property] boolean OpenNewView;


    /** overwrite any existing file

        <p>
        For storing only: overwrite any existing file, default is `TRUE`.
        Setting this to `FALSE` raises an error, if the target file already exists.
        </p>
     */
    [optional,property] boolean Overwrite;

    /** password for loading or storing documents

        <p>
        It contains a password for loading or storing a component (if necessary).
        If neither password nor encryption data is specified, loading of
        a password protected document will fail, storing will be done without
        encryption. If both are provided, the encryption data is used
        ( if the filter supports it ).
        </p>
     */
    [optional,property] string Password;

    /** contains the data for HTTP post method as a sequence of bytes.

        <p>
        Data to send to a location described by the media descriptor to get
        a result in return that will be loaded as a component
        (usually in webforms). Default is: no PostData.
        </p>
     */
    [optional,property] sequence< byte > PostData;

    /** add loaded document to recent document list

        <p>
        Setting this to `FALSE` prevents the loaded document to be added to the recent documents list.
        Default is `TRUE`.
        </p>

        @since LibreOffice 5.1
     */
    [optional,property] boolean PickListEntry;

    /** use MediaDescriptor::PostData instead of this

        <p>
        Same as PostData, but the data is transferred as a string
        (just for compatibility).
        </p>

        @deprecated
     */
    [optional,property] string PostString;

    /** show preview

        <p>
        Setting this to `TRUE` tells the a loaded component that it is loaded as
        a preview, so it can optimize loading and viewing for this special purpose.
        Default is `FALSE`.
        </p>
     */
    [optional,property] boolean Preview;

    /** open document readonly

        <p>
        Tells whether a document should be loaded in a (logical) readonly or in
        read/write mode. If opening in the desired mode is impossible, an error occurs.
        By default the loaded content decides what to do: if its UCB content supports
        a "readonly" property, the logical open mode depends on that, otherwise
        it will be read/write. This is only a UI related property, opening a
        document in read only mode will not prevent the component from being
        modified by API calls, but all modifying functionality in the UI will
        be disabled or removed.
        </p>
     */
    [optional,property] boolean ReadOnly;

    /** start presentation from a document

        <p>
        Tells the component loading the document that a presentation that is in the
        document is to be started right away.
        </p>
    */
    [optional,property] boolean StartPresentation;

    /** name of document referrer

        <p>
        A URL describing the environment of the request; e.g. a referrer may be a
        URL of a document, if a hyperlink inside this document is clicked to load
        another document. The referrer may be evaluated by the addressed UCB content
        or the loaded document. Without a referrer the processing of URLs that
        needs security checks will be denied, e.g. "macro:" URLs.
        <br>
        Don't be confused about the wrong spelling; it is kept for compatibility reasons.
        </p>
     */
    [optional,property] string Referer;

    /** let the document be opened in repair mode

        <p>
        For loading of corrupted zip packages: Setting this to `TRUE` let the document
        be opened in repair mode, so as much as possible information will be retrieved.
        </p>

     @since OOo 1.1.2
     */
    [optional,property] boolean RepairPackage;

    /** can be used for status information

        <p>
        Object implementing the com::sun::star::task::XStatusIndicator
        interface that can be used to give status information (text or progress) for the task.
        The office provides a default implementation for it. It is not allowed to keep
        a reference to this object, even not in the loaded or stored component's
        copy of the MediaDescriptor provided by its arguments attribute.
        </p>
     */
    [optional,property] com::sun::star::task::XStatusIndicator StatusIndicator;

    /** allows to specify the URL that is used next time SaveAs dialog is opened

        <p>
        If the parameter is specified, the URL will be used by SaveAs dialog
        next time as target folder.
        </p>
     */
    [optional,property] string SuggestedSaveAsDir;

    /** allows to specify the suggested file name that is used next time SaveAs
        dialog is opened

        <p>
        If the parameter is specified, the file name will be suggested by
        SaveAs dialog next time.
        </p>
     */
    [optional,property] string SuggestedSaveAsName;

    /** name of the template instead of the URL

        <p>
        The logical name of a template to load. Together with the MediaDescriptor::TemplateRegion
        property it can be used instead of the URL of the template. Use always in conjunction with
        MediaDescriptor::TemplateRegionName.
        </p>
     */
    [optional,property] string TemplateName;

    /** name of the template instead of the URL

        <p>
        See MediaDescriptor::TemplateName. The template region names are the folder names you see
        in the templates dialog.
        </p>
     */
    [optional,property] string TemplateRegionName;

    /** regulate using of compressing

        <p>
        For storing: Setting this to `TRUE` means, don't use a zip file to save
        the document, use a folder instead (only usable for UCB contents, that
        support folders). Default is `FALSE`.
        </p>
     */
    [optional,property] boolean Unpacked;

    /** URL of the document

        <p>
        The location of the component in URL syntax. It must be a fully qualified URL.
        </p>
     */
    [optional,property] string URL;

    /** storage version

        <p>
        For components supporting versioning: the number of the version to be
        loaded or saved. Default is zero and means: no version is created or
        loaded, the "main" document is processed.
        </p>
     */
    [optional,property] short Version;

    /** set special view state
        <p>
        Data to set a special view state after loading. The type depends on
        the component and is usually retrieved from a com::sun::star::frame::Controller
        object by its com::sun::star::frame::XController
        interface. Default is: no view data.
        </p>
     */
    [optional,property] any ViewData;

    /** id of the initial view

        <p>
        For components supporting different views: a number to define the view
        that should be constructed after loading. Default is: zero, and this
        should be treated by the component as the default view.
        </p>
     */
    [optional,property] short ViewId;

    /** should the macro be executed.
        the value should be one from com::sun::star::document::MacroExecMode
        constant list.

        @since OOo 1.1.2
     */
    [optional,property] short MacroExecutionMode;

    /** can the document be updated depending from links.
        the value should be one from com::sun::star::document::UpdateDocMode
        constant list.

        @since OOo 1.1.2
     */
    [optional,property] short UpdateDocMode;

    /** specifies the name of the view controller to create when loading a document

        <p>If this property is used when loading a document into a frame, then it
        specifies the name of the view controller to create. That is, the property
        is passed to the document's com::sun::star::frame::XModel2::createViewController()
        method.<br/>
        If the loaded document does not support the <code>XModel2</code> interface,
        the property is ignored.</p>

        @see ::com::sun::star::frame::XModel2::createViewController
        @see ::com::sun::star::frame::XController2::ViewControllerName

        @since OOo 3.0
     */
    [optional,property] string ViewControllerName;

    /** specifies the frame containing the document. May be empty.
     */
    [optional,property] com::sun::star::frame::XFrame Frame;

    /** Setting this option will prevent copying/dragging any content anywhere.
        The commands 'Copy' and 'Cut' will be disabled; selection clipboard won't work,
        and dragging with mouse will also be disabled.

        @since LibreOffice 6.4
     */
    [optional,property] boolean LockContentExtraction;

    /** Setting this option will prevent exporting document content to any file.
        Export, Send, save as, etc will be disabled,
        as well as individual graphic/chart export and mail merge.

        @since LibreOffice 6.4
     */
    [optional,property] boolean LockExport;

    /** Setting this option will disable all print functions (including Printer setup)

        @since LibreOffice 6.4
     */
    [optional,property] boolean LockPrint;

    /** Setting this option will disable the save function.
     *
        @since LibreOffice 6.4
     */
    [optional,property] boolean LockSave;

    /** Setting this option will disable switching to edit mode from read-only mode.
     *
        @since LibreOffice 6.4
     */
    [optional,property] boolean LockEditDoc;

    /** Mark the document as replaceable / a placeholder

        <p>Normally a document is always opened in a new frame. If this property is
        set to true, this document just acts as a placeholder while it's unmodified.
        I.e. the next opened document from its frame will close and replace it.</p>

        <p>This defaults to false, except for the default template of a LibreOffice
        module, referenced as "private:factory/&lt;module&gt;".</p>

        @since LibreOffice 7.0
     */
    [optional,property] boolean Replaceable;
};


}; }; }; };

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */