/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */



 module com {  module sun {  module star {  module embed {

/** This is a service that allows to get access to a package using storage
    hierarchy.

    <p>
    A root storage should be retrieved by using StorageFactory
    service. Substorages are created through XStorage interface
    of a parent storage.
    </p>
 */
published service Storage
{
    /** This service describes the base functionality of storages.

        <p>
        Please see below the description of additional requirements for the
        package storage implementation.
        </p>

        <dl>
            <dt>interface com::sun::star::lang::XComponent
            </dt>
            <dd>
                <p>
                A root storage is created by StorageFactory
                and is controlled by refcounting. In case refcounting
                is decreased to zero the storage will be disposed
                automatically. It is still strongly recommended that
                a root storage is disposed explicitly since in garbage
                collector based languages the refcounting can be
                decreased too late and resources locked by the storage
                will not be freed until then.
                </p>

                <p>
                A substorage is created by XStorage
                interface of storage. Each time a substorage is opened
                it is locked ( in case it is opened in readonly mode
                it is locked for writing, in case it is opened in
                read-write mode it is locked for reading and writing )
                until it is disposed.  The lifetime of substorage is
                also controlled by refcounting but because of mentioned
                garbage collection specific it is strongly recommended
                to dispose substorages explicitly.
                </p>

                <p>
                In case a storage object is disposed all the elements
                ( substorages and substreams ) retrieved from the
                object are disposed. If the storage was opened in
                read-write mode all non-committed changes will be lost.
                </p>
            </dd>
            <dt>interface XStorage</dt>
            <dd>
                <dl>
                    <dt>XStorage::openStreamElement()</dt>
                    <dd>
                        <p>
                        This method returns StorageStream
                        service implementation.
                        </p>

                        <p>
                        If the child stream is an encrypted one a correct
                        common storage password should be set through
                        XEncryptionProtectedSource interface to
                        this storage or to a one of storages in parent
                        hierarchy. In case the password is not set or is a
                        wrong one an exception will be thrown.
                        </p>
                    </dd>

                    <dt>XStorage::openEncryptedStreamElement()</dt>
                    <dd>
                        This method allows to specify reading password for the
                        stream explicitly. The password will be used to read
                        the stream. It is possible to specify a new password
                        for stream storing through
                        XEncryptionProtectedSource interface. In
                        case a new password is not specified an old one will
                        be used for storing.
                    </dd>

                    <dt>XStorage::openStorageElement()</dt>
                    <dd>
                        This method returns Storage service
                        implementation.
                    </dd>

                    <dt>XStorage::cloneStreamElement()</dt>
                    <dd>
                        <p>
                        This method returns StorageStream service
                        implementation.
                        </p>

                        <p>
                        The latest flashed version of the stream will be used.
                        The stream can be flashed explicitly by
                        com::sun::star::io::XOutputStream::flush()
                        call.
                        </p>

                        <p>
                        A storage flashes on commit all the child streams it
                        owns. So in case after the stream is changed neither
                        the storage was committed nor the stream was flushed
                        explicitly, the changes will not appear in the new
                        created stream. This method allows to retrieve copy of
                        a child stream even in case it is already opened for
                        writing.
                        </p>

                        <p>
                        If the child stream is an encrypted one a correct
                        common storage password should be set through
                        XEncryptionProtectedSource interface to
                        this storage or to a one of storages in parent
                        hierarchy. In case the password is not set or is a
                        wrong one an exception will be thrown.
                        </p>
                    </dd>

                    <dt>XStorage::cloneEncryptedStreamElement()</dt>
                    <dd>
                        <p>
                        This method returns StorageStream service
                        implementation.
                        </p>

                        <p>
                        The latest flashed version of the stream will be used.
                        The stream can be flashed explicitly by
                        com::sun::star::io::XOutputStream::flush()
                        call.
                        </p>

                        <p>
                        A storage flashes on commit all the child streams it
                        owns. So in case after the stream is changed neither
                        the storage was committed nor the stream was flushed
                        explicitly, the changes will not appear in the new
                        created stream. This method allows to retrieve copy of
                        a child stream even in case it is already opened for
                        writing.
                        </p>
                    </dd>

                    <dt>XStorage::copyLastCommitTo()</dt>
                    <dd>
                        This method gets Storage service
                        implementation and fills it in with the latest
                        committed version of this storage. So in case the
                        storage was not committed after it was changed, the
                        changes will not appear in the new created storage.
                    </dd>

                    <dt>XStorage::copyStorageElementLastCommitTo()</dt>
                    <dd>
                        <p>
                        This method gets Storage service
                        implementation and fills it in with the contents of
                        the requested substorage. The latest committed version
                        of child storage will be used. So in case the child
                        storage was not committed after it was changed, the
                        changes will not appear in the new created storage.
                        </p>

                        <p>
                        This method allows to retrieve copy of a child storage
                        even in case it is already opened for writing.
                        </p>
                    </dd>

                    <dt>XStorage::removeStorageElement()</dt>
                    <dd>
                        If the element is opened the removing will fail.
                    </dd>
                </dl>
            </dd>
            <dt>property URL</dt>
            <dd>
                If the storage is created based on url this property allows
                to retrieve it.
            </dd>
        </dl>

     */
    service BaseStorage;

    /** allows to commit or revert changes that were done for the storage.

        <p>
        If a storage is committed all changes made to it will be integrated to
        its parent storage. This is recursive process, so the last committed
        storage should be the root one. For the package based storages commit
        of a root storage also means flashing to the related medium. If
        a storage is not committed, no changes for it or its child elements
        will be stored.
        </p>
     */
    interface ::com::sun::star::embed::XTransactedObject;

    /** allows to track storage's transaction state.
     */
    interface ::com::sun::star::embed::XTransactionBroadcaster;

    /** allows to set password to a root storage.

        <p>
        This interface can be supported by a storage to allow to set
        a common storage password. This password is used as default password
        to decrypt all encrypted streams and to encrypt streams that are
        marked to use common storage password on storing.
        Specifying of the password for a storage allows to use it for the
        whole subtree. Of course substorage can allow to overwrite the common
        storage password for own subtree.
        </p>
     */
    [optional]
    interface ::com::sun::star::embed::XEncryptionProtectedSource;

    /** allows to get and set the media type of the storage.
     */
    [property] string MediaType;

    /** allows to get and set the version of the format related to the
        MediaType.
     */
    [property,optional] string Version;

    /** allows to detect whether mediatype is detected by using fallback
        approach.

        <p>
        Can be set to true if the mediatype can not be detected in standard
        way, but there is a fallback solution allows to do it.
        </p>

        <p>
        Usually means that the document validity is questionable, although
        the package itself is not corrupted. The decision about document
        validity in this case is in application hands. It is up to user of
        the storage to decide whether he accepts the fallback approach for
        an implementation of this service, outputs a warning or an error.
        </p>
     */
    [property, readonly] boolean MediaTypeFallbackIsUsed;

    /** allows to detect whether the storage is a root one.
     */
    [property, readonly] boolean IsRoot;

    /** allows to detect whether storage is open in "repair package" mode or
        not.
     */
    [property, optional, readonly] boolean RepairPackage;

    /** allows to detect if the storage contains encrypted entries.

        <p>
        In case it is set to `TRUE` the storage itself and/or a tree of
        substorages contain encrypted streams. Usually in case this property
        is supported the implementation supports
        XEncryptionProtectedSource interface.
        </p>
     */
    [property, optional, readonly] boolean HasEncryptedEntries;

    /** allows to detect if the storage contains non-encrypted entries.

        <p>
        In case it is set to `TRUE` the storage itself and/or a tree of
        substorages contains non-encrypted streams. Usually in case this
        property is supported the implementation supports
        XEncryptionProtectedSource interface.
        </p>
     */
    [property, optional, readonly] boolean HasNonEncryptedEntries;
};


}; }; }; };

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */