/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #include using namespace ::com::sun::star; namespace { /// Covers ooox/source/export/ fixes. class Test : public UnoApiXmlTest { public: Test() : UnoApiXmlTest("/oox/qa/unit/data/") { } }; CPPUNIT_TEST_FIXTURE(Test, testPolylineConnectorPosition) { // Given a document with a group shape and therein a polyline and a connector. loadFromFile(u"tdf141786_PolylineConnectorInGroup.odt"); // When saving that to DOCX: save("Office Open XML Text"); // Then make sure polyline and connector have the correct position. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // For child elements of groups in Writer the position has to be adapted to be relative // to group instead of being relative to anchor. That was missing for polyline and // connector. // Polyline: Without fix it would have failed with expected: 0, actual: 1800360 assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[1]/wps:spPr/a:xfrm/a:off"_ostr, "x"_ostr, "0"); // ... failed with expected: 509400, actual: 1229400 assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[1]/wps:spPr/a:xfrm/a:off"_ostr, "y"_ostr, "509400"); // Connector: Without fix it would have failed with expected: 763200, actual: 2563560 assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[3]/wps:spPr/a:xfrm/a:off"_ostr, "x"_ostr, "763200"); // ... failed with expected: 0, actual: 720000 assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[3]/wps:spPr/a:xfrm/a:off"_ostr, "y"_ostr, "0"); // Polyline and connector were shifted 1800360EMU right, 720000EMU down. } CPPUNIT_TEST_FIXTURE(Test, testRotatedShapePosition) { // Given a document with a group shape and therein a rotated custom shape. loadFromFile(u"tdf141786_RotatedShapeInGroup.odt"); // FIXME: validation error in OOXML export: Errors: 3 skipValidation(); // When saving that to DOCX: save("Office Open XML Text"); // Then make sure the rotated child shape has the correct position. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // For a group itself and for shapes outside of groups, the position calculation is done in // DocxSdrExport. For child elements of groups it has to be done in // DrawingML::WriteShapeTransformation(), but was missing. // Without fix it would have failed with expected: 469440, actual: 92160 // The shape was about 1cm shifted up and partly outside its group. assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[1]/wps:spPr/a:xfrm/a:off"_ostr, "y"_ostr, "469440"); } CPPUNIT_TEST_FIXTURE(Test, testDmlGroupshapePolygon) { // Given a document with a group shape, containing a single polygon child shape: loadFromFile(u"dml-groupshape-polygon.docx"); // FIXME: validation error in OOXML export: Errors: 9 skipValidation(); // When saving that to DOCX: save("Office Open XML Text"); // Then make sure that the group shape, the group shape's child size and the child shape's size // match: xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); assertXPath(pXmlDoc, "//wpg:grpSpPr/a:xfrm/a:ext"_ostr, "cx"_ostr, "5328360"); // Without the accompanying fix in place, this test would have failed, the element was // not written. assertXPath(pXmlDoc, "//wpg:grpSpPr/a:xfrm/a:chExt"_ostr, "cx"_ostr, "5328360"); assertXPath(pXmlDoc, "//wps:spPr/a:xfrm/a:ext"_ostr, "cx"_ostr, "5328360"); } CPPUNIT_TEST_FIXTURE(Test, testCustomShapeArrowExport) { // Given a document with a few different kinds of arrow shapes in it: loadFromFile(u"tdf142602_CustomShapeArrows.odt"); // FIXME: validation error in OOXML export: Errors: 11 skipValidation(); // When saving that to DOCX: save("Office Open XML Text"); // Then the shapes should retain their correct control values. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // Without the fix the output OOXML would have no tags in it. // Right arrow assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[1]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom"_ostr, "prst"_ostr, "rightArrow"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[1]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]"_ostr, "fmla"_ostr, "val 50000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[1]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]"_ostr, "fmla"_ostr, "val 46321"); // Left arrow assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[2]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom"_ostr, "prst"_ostr, "leftArrow"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[2]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]"_ostr, "fmla"_ostr, "val 50000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[2]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]"_ostr, "fmla"_ostr, "val 52939"); // Down arrow assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[3]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom"_ostr, "prst"_ostr, "downArrow"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[3]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]"_ostr, "fmla"_ostr, "val 50000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[3]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]"_ostr, "fmla"_ostr, "val 59399"); // Up arrow assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[4]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom"_ostr, "prst"_ostr, "upArrow"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[4]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]"_ostr, "fmla"_ostr, "val 50000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[4]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]"_ostr, "fmla"_ostr, "val 63885"); // Left-right arrow assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[5]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom"_ostr, "prst"_ostr, "leftRightArrow"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[5]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]"_ostr, "fmla"_ostr, "val 50000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[5]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]"_ostr, "fmla"_ostr, "val 53522"); // Up-down arrow assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[6]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom"_ostr, "prst"_ostr, "upDownArrow"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[6]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]"_ostr, "fmla"_ostr, "val 50000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[6]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]"_ostr, "fmla"_ostr, "val 62743"); // Right arrow callout assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[7]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom"_ostr, "prst"_ostr, "rightArrowCallout"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[7]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]"_ostr, "fmla"_ostr, "val 25002"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[7]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]"_ostr, "fmla"_ostr, "val 25000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[7]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[3]"_ostr, "fmla"_ostr, "val 25052"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[7]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[4]"_ostr, "fmla"_ostr, "val 66667"); // Left arrow callout assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[8]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom"_ostr, "prst"_ostr, "leftArrowCallout"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[8]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]"_ostr, "fmla"_ostr, "val 25002"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[8]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]"_ostr, "fmla"_ostr, "val 25000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[8]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[3]"_ostr, "fmla"_ostr, "val 25057"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[8]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[4]"_ostr, "fmla"_ostr, "val 66673"); // Down arrow callout assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[9]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom"_ostr, "prst"_ostr, "downArrowCallout"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[9]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]"_ostr, "fmla"_ostr, "val 29415"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[9]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]"_ostr, "fmla"_ostr, "val 29413"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[9]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[3]"_ostr, "fmla"_ostr, "val 16667"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[9]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[4]"_ostr, "fmla"_ostr, "val 66667"); // Up arrow callout assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[10]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom"_ostr, "prst"_ostr, "upArrowCallout"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[10]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]"_ostr, "fmla"_ostr, "val 31033"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[10]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]"_ostr, "fmla"_ostr, "val 31030"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[10]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[3]"_ostr, "fmla"_ostr, "val 16667"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[10]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[4]"_ostr, "fmla"_ostr, "val 66660"); } CPPUNIT_TEST_FIXTURE(Test, testCameraRevolutionGrabBag) { // Given a PPTX file that contains camera revolution (rotation around z axis) applied shapes loadFromFile(u"camera-rotation-revolution-nonwps.pptx"); // When saving that document: save("Impress Office Open XML"); xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // Then make sure the revolution is exported without a problem: // First shape textbox: assertXPath(pXmlDoc, "//p:sp[1]/p:spPr/a:scene3d/a:camera/a:rot"_ostr, "rev"_ostr, "5400000"); // Second shape rectangle: assertXPath(pXmlDoc, "//p:sp[2]/p:spPr/a:scene3d/a:camera/a:rot"_ostr, "rev"_ostr, "18300000"); // Make sure Shape3DProperties don't leak under txBody // Without the accompanying fix in place, this test would have failed with: // - Expected: 0 // - Actual : 1 // - In <>, XPath '//p:sp[1]/p:txBody/a:bodyPr/a:scene3d/a:camera/a:rot' number of nodes is incorrect assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:bodyPr/a:scene3d/a:camera/a:rot"_ostr, 0); assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:bodyPr/a:scene3d/a:camera/a:rot"_ostr, 0); } CPPUNIT_TEST_FIXTURE(Test, testReferToTheme) { // Given a PPTX file that contains references to a theme: loadFromFile(u"refer-to-theme.pptx"); // When saving that document: save("Impress Office Open XML"); xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // Then make sure the shape text color is a scheme color: // Without the accompanying fix in place, this test would have failed with: // - Expected: 1 // - Actual : 0 // - XPath '//p:sp/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr' number of nodes is incorrect // i.e. the element was not written. assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr"_ostr, "val"_ostr, "accent1"); assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumMod"_ostr, 0); assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumOff"_ostr, 0); // Second shape: lighter color: // Without the accompanying fix in place, this test would have failed with: // - Expected: 1 // - Actual : 0 // - XPath '//p:sp[2]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr' number of nodes is incorrect // i.e. the effects case did not write scheme colors. assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr"_ostr, "val"_ostr, "accent1"); assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumMod"_ostr, "val"_ostr, "40000"); assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumOff"_ostr, "val"_ostr, "60000"); // Third shape, darker color: assertXPath(pXmlDoc, "//p:sp[3]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr"_ostr, "val"_ostr, "accent1"); assertXPath(pXmlDoc, "//p:sp[3]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumMod"_ostr, "val"_ostr, "75000"); assertXPath(pXmlDoc, "//p:sp[3]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumOff"_ostr, 0); } CPPUNIT_TEST_FIXTURE(Test, testThemeColor_ShapeFill) { // Given an ODP file that contains references to a theme for shape fill: loadFromFile(u"ReferenceShapeFill.fodp"); // When saving that document: save("Impress Office Open XML"); // Then make sure the shape fill color is a scheme color. // Note that this was already working from PPTX files via grab-bags, //so this test intentionally uses an ODP file as input. xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); assertXPath(pXmlDoc, "//p:sp[1]/p:spPr/a:solidFill/a:schemeClr"_ostr, "val"_ostr, "accent6"); assertXPath(pXmlDoc, "//p:sp[1]/p:spPr/a:solidFill/a:schemeClr/a:lumMod"_ostr, "val"_ostr, "75000"); } CPPUNIT_TEST_FIXTURE(Test, testTdf146690_endParagraphRunPropertiesNewLinesTextSize) { // Given a PPTX file that contains references to a theme: loadFromFile(u"endParaRPr-newline-textsize.pptx"); // When saving that document: save("Impress Office Open XML"); xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // Make sure the text size is exported correctly: // Without the accompanying fix in place, this test would have failed with: // - Expected: 500 // - Actual : 1800 // i.e. the endParaRPr 'size' wasn't exported correctly assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p[1]/a:endParaRPr"_ostr, "sz"_ostr, "500"); assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p[2]/a:endParaRPr"_ostr, "sz"_ostr, "500"); assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p[3]/a:endParaRPr"_ostr, "sz"_ostr, "500"); } CPPUNIT_TEST_FIXTURE(Test, testTdf147978_endsubpath) { // Given an odp file that contains a non-primitive custom shape with command N loadFromFile(u"tdf147978_endsubpath.odp"); // When saving that document: save("Impress Office Open XML"); xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // Then make sure the pathLst has two child elements, // Without the accompanying fix in place, only one element a:path was exported. assertXPathChildren(pXmlDoc, "//a:pathLst"_ostr, 2); // and make sure first path with no stroke, second with no fill assertXPath(pXmlDoc, "//a:pathLst/a:path[1]"_ostr, "stroke"_ostr, "0"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]"_ostr, "fill"_ostr, "none"); } CPPUNIT_TEST_FIXTURE(Test, testTdf147978_commandA) { // Given an odp file that contains a non-primitive custom shape with command N loadFromFile(u"tdf147978_enhancedPath_commandA.odp"); // When saving that document: save("Impress Office Open XML"); xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // Then make sure the path has a child element arcTo. Prior to the fix that part of the curve was // not exported at all. In odp it is a command A. Such does not exist in OOXML and is therefore // exported as a:lnTo followed by a:arcTo assertXPath(pXmlDoc, "//a:pathLst/a:path/a:lnTo"_ostr, 2); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo"_ostr, 1); // And assert its attribute values assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo"_ostr, "wR"_ostr, "7200"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo"_ostr, "hR"_ostr, "5400"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo"_ostr, "stAng"_ostr, "7719588"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo"_ostr, "swAng"_ostr, "-5799266"); } CPPUNIT_TEST_FIXTURE(Test, testTdf147978_commandT) { // The odp file contains a non-primitive custom shape with commands MTZ loadFromFile(u"tdf147978_enhancedPath_commandT.odp"); // Export to pptx had only exported the command M and has used a wrong path size save("Impress Office Open XML"); // Verify the markup: xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // File has draw:viewBox="0 0 216 216" assertXPath(pXmlDoc, "//a:pathLst/a:path"_ostr, "w"_ostr, "216"); assertXPath(pXmlDoc, "//a:pathLst/a:path"_ostr, "h"_ostr, "216"); // Command T is exported as lnTo followed by arcTo. assertXPath(pXmlDoc, "//a:pathLst/a:path/a:moveTo"_ostr, 1); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:lnTo"_ostr, 1); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo"_ostr, 1); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:close"_ostr, 1); // And assert its values assertXPath(pXmlDoc, "//a:pathLst/a:path/a:moveTo/a:pt"_ostr, "x"_ostr, "108"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:moveTo/a:pt"_ostr, "y"_ostr, "162"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:lnTo/a:pt"_ostr, "x"_ostr, "138"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:lnTo/a:pt"_ostr, "y"_ostr, "110"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo"_ostr, "wR"_ostr, "108"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo"_ostr, "hR"_ostr, "54"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo"_ostr, "stAng"_ostr, "18000000"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo"_ostr, "swAng"_ostr, "18000000"); } CPPUNIT_TEST_FIXTURE(Test, testTdf147978_commandXY) { // The odp file contains a non-primitive custom shapes with commands XY loadFromFile(u"tdf147978_enhancedPath_commandXY.odp"); // Export to pptx had dropped commands X and Y. save("Impress Office Open XML"); // Verify the markup: xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // File has draw:viewBox="0 0 10 10" assertXPath(pXmlDoc, "//a:pathLst/a:path[1]"_ostr, "w"_ostr, "10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]"_ostr, "h"_ostr, "10"); // Shape has M 0 5 Y 5 0 10 5 5 10 F Y 0 5 N M 10 10 X 0 0 assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:moveTo/a:pt"_ostr, "x"_ostr, "0"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:moveTo/a:pt"_ostr, "y"_ostr, "5"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[1]"_ostr, "wR"_ostr, "5"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[1]"_ostr, "hR"_ostr, "5"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[1]"_ostr, "stAng"_ostr, "10800000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[1]"_ostr, "swAng"_ostr, "5400000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[2]"_ostr, "stAng"_ostr, "16200000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[2]"_ostr, "swAng"_ostr, "5400000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[3]"_ostr, "stAng"_ostr, "0"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[3]"_ostr, "swAng"_ostr, "5400000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[4]"_ostr, "stAng"_ostr, "0"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[4]"_ostr, "swAng"_ostr, "-5400000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]/a:moveTo/a:pt"_ostr, "x"_ostr, "10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]/a:moveTo/a:pt"_ostr, "y"_ostr, "10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]/a:arcTo"_ostr, "wR"_ostr, "10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]/a:arcTo"_ostr, "hR"_ostr, "10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]/a:arcTo"_ostr, "stAng"_ostr, "5400000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]/a:arcTo"_ostr, "swAng"_ostr, "5400000"); } CPPUNIT_TEST_FIXTURE(Test, testTdf147978_commandHIJK) { // The odp file contains a non-primitive custom shapes with commands H,I,J,K loadFromFile(u"tdf147978_enhancedPath_commandHIJK.odp"); // Export to pptx had dropped commands X and Y. save("Impress Office Open XML"); // Verify the markup: xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // File has draw:viewBox="0 0 80 80" assertXPath(pXmlDoc, "//a:pathLst/a:path[1]"_ostr, "w"_ostr, "80"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]"_ostr, "h"_ostr, "80"); // File uses from back to front J (lighten), I (lightenLess), normal fill, K (darkenLess), // H (darken). New feature, old versions did not export these at all. assertXPath(pXmlDoc, "//a:pathLst/a:path[1]"_ostr, "fill"_ostr, "lighten"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]"_ostr, "fill"_ostr, "lightenLess"); assertXPathNoAttribute(pXmlDoc, "//a:pathLst/a:path[3]"_ostr, "fill"_ostr); assertXPath(pXmlDoc, "//a:pathLst/a:path[4]"_ostr, "fill"_ostr, "darkenLess"); assertXPath(pXmlDoc, "//a:pathLst/a:path[5]"_ostr, "fill"_ostr, "darken"); } CPPUNIT_TEST_FIXTURE(Test, testTdf147978_subpath) { // The odp file contains a non-primitive custom shapes with commands H,I,J,K loadFromFile(u"tdf147978_enhancedPath_subpath.pptx"); // Export to pptx had dropped the subpaths. save("Impress Office Open XML"); // Verify the markup: xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // File should have four subpaths with increasing path size assertXPath(pXmlDoc, "//a:pathLst/a:path[1]"_ostr, "w"_ostr, "10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]"_ostr, "h"_ostr, "10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]"_ostr, "w"_ostr, "20"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]"_ostr, "h"_ostr, "20"); assertXPath(pXmlDoc, "//a:pathLst/a:path[3]"_ostr, "w"_ostr, "40"); assertXPath(pXmlDoc, "//a:pathLst/a:path[3]"_ostr, "h"_ostr, "40"); assertXPath(pXmlDoc, "//a:pathLst/a:path[4]"_ostr, "w"_ostr, "80"); assertXPath(pXmlDoc, "//a:pathLst/a:path[4]"_ostr, "h"_ostr, "80"); } CPPUNIT_TEST_FIXTURE(Test, testTdf100391TextAreaRect) { // The document has a custom shape of type "non-primitive" to trigger the custGeom export loadFromFile(u"tdf100391_TextAreaRect.odp"); // When saving to PPTX the textarea rect was set to default instead of using the actual area save("Impress Office Open XML"); // Verify the markup. Without fix the values were l="l", t="t", r="r", b="b" xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); assertXPath(pXmlDoc, "//a:custGeom/a:rect"_ostr, "l"_ostr, "textAreaLeft"); assertXPath(pXmlDoc, "//a:custGeom/a:rect"_ostr, "t"_ostr, "textAreaTop"); assertXPath(pXmlDoc, "//a:custGeom/a:rect"_ostr, "r"_ostr, "textAreaRight"); assertXPath(pXmlDoc, "//a:custGeom/a:rect"_ostr, "b"_ostr, "textAreaBottom"); // The values are calculated in guides, for example assertXPath(pXmlDoc, "//a:custGeom/a:gdLst/a:gd[1]"_ostr, "name"_ostr, "textAreaLeft"); assertXPath(pXmlDoc, "//a:custGeom/a:gdLst/a:gd[1]"_ostr, "fmla"_ostr, "*/ 1440000 w 2880000"); // The test reflects the state of Apr 2022. It needs to be adapted when export of handles and // guides is implemented. } CPPUNIT_TEST_FIXTURE(Test, testTdf109169_OctagonBevel) { // The odp file contains an "Octagon Bevel" shape. Such has shading not in commands H,I,J,K // but shading is generated in ctor of EnhancedCustomShape2d from the Type value. loadFromFile(u"tdf109169_OctagonBevel.odt"); // FIXME: validation error in OOXML export: Errors: 1 skipValidation(); // Export to docx had not written a:fill or a:stroke attributes at all. save("Office Open XML Text"); // Verify the markup: xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // File should have six subpaths, one with stroke and five with fill assertXPath(pXmlDoc, "//a:pathLst/a:path[1]"_ostr, "stroke"_ostr, "0"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]"_ostr, "fill"_ostr, "darkenLess"); assertXPath(pXmlDoc, "//a:pathLst/a:path[3]"_ostr, "fill"_ostr, "darken"); assertXPath(pXmlDoc, "//a:pathLst/a:path[4]"_ostr, "fill"_ostr, "darken"); assertXPath(pXmlDoc, "//a:pathLst/a:path[5]"_ostr, "fill"_ostr, "lightenLess"); assertXPath(pXmlDoc, "//a:pathLst/a:path[6]"_ostr, "fill"_ostr, "lighten"); } CPPUNIT_TEST_FIXTURE(Test, testFaultyPathCommandsAWT) { // The odp file contains shapes whose path starts with command A, W, T or L. That is a faulty // path. LO is tolerant and renders it so that is makes a moveTo to the start point of the arc or // the end of the line respectively. Export to OOXML does the same now and writes a moveTo // instead of the normally used lnTo. If a lnTo is written, MS Office shows nothing of the shape. loadFromFile(u"FaultyPathStart.odp"); save("Impress Office Open XML"); // Verify the markup: xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // First child of a:path should be a moveTo in all four shapes. assertXPath(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo"_ostr); assertXPath(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo"_ostr); assertXPath(pXmlDoc, "//p:spTree/p:sp[3]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo"_ostr); assertXPath(pXmlDoc, "//p:spTree/p:sp[4]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo"_ostr); } CPPUNIT_TEST_FIXTURE(Test, testTdf148784StretchXY) { // The document has a custom shapes of type "non-primitive" to trigger the custGeom export. // They use formulas with 'right' and 'bottom'. // When saving to PPTX the attributes stretchpoint-x and stretchpoint-y were not considered. The // line at right and bottom edge were positioned inside as if the shape had a square size. loadFromFile(u"tdf148784_StretchXY.odp"); save("Impress Office Open XML"); // Verify the markup. xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // x-position of last segment should be same as path width. It was 21600 without fix. sal_Int32 nWidth = getXPathContent(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/@w"_ostr) .toInt32(); sal_Int32 nPosX = getXPathContent( pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo[4]/a:pt/@x"_ostr) .toInt32(); CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchX", nWidth, nPosX); // y-position of last segment should be same as path height. It was 21600 without fix. sal_Int32 nHeight = getXPathContent(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/@h"_ostr) .toInt32(); sal_Int32 nPosY = getXPathContent( pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo[4]/a:pt/@y"_ostr) .toInt32(); CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchY", nHeight, nPosY); // The test reflects the state of Apr 2022. It needs to be adapted when export of handles and // guides is implemented. } CPPUNIT_TEST_FIXTURE(Test, testTdf148784StretchCommandQ) { // The document has a custom shapes of type "non-primitive" to trigger the custGeom export. // They use formulas with 'right' and 'bottom'. // When saving to PPTX the attributes stretchpoint-x and stretchpoint-y were not considered. // That results in wrong arcs on the right or bottom side of the shape. loadFromFile(u"tdf148784_StretchCommandQ.odp"); save("Impress Office Open XML"); // Verify the markup. xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // x-position of second quadBezTo control should be same as path width. It was 21600 without fix. sal_Int32 nWidth = getXPathContent(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/@w"_ostr) .toInt32(); sal_Int32 nPosX = getXPathContent( pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/a:quadBezTo[2]/a:pt/@x"_ostr) .toInt32(); CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchX", nWidth, nPosX); // y-position of third quadBezTo control should be same as path height. It was 21600 without fix. sal_Int32 nHeight = getXPathContent(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/@h"_ostr) .toInt32(); sal_Int32 nPosY = getXPathContent( pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/a:quadBezTo[3]/a:pt/@y"_ostr) .toInt32(); CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchY", nHeight, nPosY); // The test reflects the state of Apr 2022. It needs to be adapted when export of handles and // guides is implemented. } CPPUNIT_TEST_FIXTURE(Test, testTdf148784StretchCommandVW) { // The document has a custom shapes of type "non-primitive" to trigger the custGeom export. // It should not need adaption when export of handles and guides is implemented because it // has only fixed values in the path. // When saving to PPTX the attributes stretchpoint-x and stretchpoint-y were not considered. // That results in circles instead of ellipses. loadFromFile(u"tdf148784_StretchCommandVW.odp"); save("Impress Office Open XML"); // Verify the markup. xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // wR of first ArcTo in first shape should be same as path width/2. It was 10800 without fix. sal_Int32 nHalfWidth = getXPathContent(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/@w"_ostr) .toInt32() / 2; sal_Int32 nWR = getXPathContent( pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/a:arcTo[1]/@wR"_ostr) .toInt32(); CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchX", nHalfWidth, nWR); // hR of first ArcTo in second shape should be same as path height /2. It was 10800 without fix. sal_Int32 nHalfHeight = getXPathContent(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/@h"_ostr) .toInt32() / 2; sal_Int32 nHR = getXPathContent( pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/a:arcTo[1]/@hR"_ostr) .toInt32(); CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchY", nHalfHeight, nHR); } CPPUNIT_TEST_FIXTURE(Test, testTdf149551VertPadding) { // The document has shape[1] with attribute vert="vert270" and shape[2] with vert="vert". The text // has paddings lIns="720000"=2cm, tIns="360000"=1cm, rIns="0" and bIns="0". // After load and save the paddings were rotated and a 90deg text rotation was added. loadFromFile(u"tdf149551_vert_and_padding.pptx"); save("Impress Office Open XML"); // Verify the markup. The values must be the same as in the original file. xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); for (sal_Int32 i = 1; i <= 2; i++) { OString sElement = "//p:spTree/p:sp[" + OString::number(i) + "]/p:txBody/a:bodyPr"; assertXPath(pXmlDoc, sElement, "lIns"_ostr, "720000"); assertXPath(pXmlDoc, sElement, "tIns"_ostr, "360000"); assertXPath(pXmlDoc, sElement, "rIns"_ostr, "0"); assertXPath(pXmlDoc, sElement, "bIns"_ostr, "0"); assertXPathNoAttribute(pXmlDoc, sElement, "rot"_ostr); } } CPPUNIT_TEST_FIXTURE(Test, testTdf149538upright) { // The document has a shape with attribute upright="1" in the bodyPr element. On import it is // emulated by rotating the text area rectangle. On export there should be an upright="1" // attribute but no 'rot' attribute. Without the fix the 'rot' attribute with values from // the emulation was written out. loadFromFile(u"tdf149538_upright.pptx"); save("Impress Office Open XML"); // Verify the markup. The values must be the same as in the original file. xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); assertXPath(pXmlDoc, "//p:spTree/p:sp/p:txBody/a:bodyPr"_ostr, "upright"_ostr, "1"); assertXPathNoAttribute(pXmlDoc, "//p:spTree/p:sp/p:txBody/a:bodyPr"_ostr, "rot"_ostr); } CPPUNIT_TEST_FIXTURE(Test, testTdf151008VertAnchor) { loadFromFile(u"tdf151008_eaVertAnchor.pptx"); save("Impress Office Open XML"); xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // The order of the shapes in the file is by name "Right", "Center", "Left", "RightMiddle", // "CenterMiddle" and "LeftMiddle". I access the shapes here by index, because the XPath is // easier then. // As of Sep 2022 LibreOffice does not write the default anchorCtr="0" // Right assertXPath(pXmlDoc, "//p:spTree/p:sp[1]/p:txBody/a:bodyPr"_ostr, "anchor"_ostr, "t"); assertXPathNoAttribute(pXmlDoc, "//p:spTree/p:sp[1]/p:txBody/a:bodyPr"_ostr, "anchorCtr"_ostr); // Center assertXPath(pXmlDoc, "//p:spTree/p:sp[2]/p:txBody/a:bodyPr"_ostr, "anchor"_ostr, "ctr"); assertXPathNoAttribute(pXmlDoc, "//p:spTree/p:sp[2]/p:txBody/a:bodyPr"_ostr, "anchorCtr"_ostr); // Left assertXPath(pXmlDoc, "//p:spTree/p:sp[3]/p:txBody/a:bodyPr"_ostr, "anchor"_ostr, "b"); assertXPathNoAttribute(pXmlDoc, "//p:spTree/p:sp[3]/p:txBody/a:bodyPr"_ostr, "anchorCtr"_ostr); // RightMiddle assertXPath(pXmlDoc, "//p:spTree/p:sp[4]/p:txBody/a:bodyPr"_ostr, "anchor"_ostr, "t"); assertXPath(pXmlDoc, "//p:spTree/p:sp[4]/p:txBody/a:bodyPr"_ostr, "anchorCtr"_ostr, "1"); // CenterMiddle assertXPath(pXmlDoc, "//p:spTree/p:sp[5]/p:txBody/a:bodyPr"_ostr, "anchor"_ostr, "ctr"); assertXPath(pXmlDoc, "//p:spTree/p:sp[5]/p:txBody/a:bodyPr"_ostr, "anchorCtr"_ostr, "1"); // LeftMiddle assertXPath(pXmlDoc, "//p:spTree/p:sp[6]/p:txBody/a:bodyPr"_ostr, "anchor"_ostr, "b"); assertXPath(pXmlDoc, "//p:spTree/p:sp[6]/p:txBody/a:bodyPr"_ostr, "anchorCtr"_ostr, "1"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkBitmapFill) { // The document has a Fontwork shape with bitmap fill. loadFromFile(u"tdf128568_FontworkBitmapFill.odt"); // FIXME: validation error in OOXML export: Errors: 1 // Attribute ID is not allowed in element v:shape skipValidation(); // Saving that to DOCX: save("Office Open XML Text"); // Make sure it is exported to VML and has no txbxContent but a textpath element. Without fix it // was exported as DML 'abc transform', but that is not able to use bitmap fill in Word. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); assertXPath(pXmlDoc, "//mc:alternateContent"_ostr, 0); assertXPath(pXmlDoc, "//v:shape/v:textbox/v:txbxContent"_ostr, 0); assertXPath(pXmlDoc, "//v:shape/v:textpath"_ostr, 1); // Without fix the bitmap was referenced by v:imagedata element. But that produces a picture // in Word not a WordArt shape. Instead a v:fill has to be used. assertXPath(pXmlDoc, "//v:shape/v:imagedata"_ostr, 0); assertXPath(pXmlDoc, "//v:shape/v:fill"_ostr, 1); assertXPath(pXmlDoc, "//v:shape/v:fill[@r:id]"_ostr, 1); // The fill is set to 'stretched' in LO, that is type="frame" in VML. That was not implemented // in VML export. assertXPath(pXmlDoc, "//v:shape/v:fill"_ostr, "type"_ostr, "frame"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkFontProperties) { // The document has five Fontwork shapes. They have bitmap fill and thus are exported to VML. // They differ in font properties e.g. font weight and character spacing. loadFromFile(u"tdf128568_FontworkFontProperties.odt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save("Office Open XML Text"); // Make sure the style attribute of the textpath element has the needed items. Without fix only // font-family and font-size were written. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); OUString sStyle; // bold sStyle = getXPath(pXmlDoc, "(//v:shape)[1]/v:textpath"_ostr, "style"_ostr); CPPUNIT_ASSERT(sStyle.indexOf("font-weight:bold") > -1); // italic sStyle = getXPath(pXmlDoc, "(//v:shape)[2]/v:textpath"_ostr, "style"_ostr); CPPUNIT_ASSERT(sStyle.indexOf("font-style:italic") > -1); // character spacing 'very loose', 150 * 655, see escherex.cxx sStyle = getXPath(pXmlDoc, "(//v:shape)[3]/v:textpath"_ostr, "style"_ostr); CPPUNIT_ASSERT(sStyle.indexOf("v-text-spacing:98250f") > -1); // character spacing 'tight', 90 * 655, see escherex.cxx sStyle = getXPath(pXmlDoc, "(//v:shape)[4]/v:textpath"_ostr, "style"_ostr); CPPUNIT_ASSERT(sStyle.indexOf("v-text-spacing:58950f") > -1); // same letter heights sStyle = getXPath(pXmlDoc, "(//v:shape)[5]/v:textpath"_ostr, "style"_ostr); CPPUNIT_ASSERT(sStyle.indexOf("v-same-letter-heights:t") > -1); } CPPUNIT_TEST_FIXTURE(Test, testVMLFontworkSlantUp) { // The document has a Fontwork shape type 'textSlantUp' (172). When exporting to docx, Word does // not recognize its markup as preset WordArt, because the used markup differs from what Word // expects for this type of shape. As a result Word saves the shape as having custom geometry // and such is not understand by LibreOffice. loadFromFile(u"tdf153296_VML_export_SlantUp.odt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save("Office Open XML Text"); // Examine the saved markup. I could identify the following two problems to hinder Word from // accepting the markup. There might exist more problems. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // Make sure a element exists and has an o:connecttype attribute assertXPath(pXmlDoc, "//v:shapetype/v:path"_ostr, 1); assertXPath(pXmlDoc, "//v:shapetype/v:path[@o:connecttype]"_ostr, 1); // Make sure the handle position is written without reference to a formula OUString sPosition = getXPath(pXmlDoc, "//v:h"_ostr, "position"_ostr); CPPUNIT_ASSERT_EQUAL(sal_Int32(-1), sPosition.indexOf("@")); CPPUNIT_ASSERT_EQUAL(OUString("topLeft,#0"), sPosition); } CPPUNIT_TEST_FIXTURE(Test, testVMLFontworkArchUp) { // The document has a Fontwork shape type 'textArchUp' (172). When exporting to docx, the shape // was not exported as VML Fontwork but as a rectangle. loadFromFile(u"tdf153296_VML_export_ArchUpCurve.odt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save("Office Open XML Text"); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // Make sure there is no element assertXPath(pXmlDoc, "//v:rect"_ostr, 0); // ..., but a element with subelement assertXPath(pXmlDoc, "//v:shapetype/v:textpath"_ostr, 1); } CPPUNIT_TEST_FIXTURE(Test, testVMLAdjustmentExport) { // The document has a Fontwork shape type 'textCirclePour' (150). When exporting to docx, the // adjustment values were not exported at all. loadFromFile(u"tdf153246_VML_export_Fontwork_Adjustment.odt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save("Office Open XML Text"); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // Make sure an "adj" attribute exists assertXPath(pXmlDoc, "//v:shape[@adj]"_ostr, 1); // ... and has the correct values OUString sAdjustments = getXPath(pXmlDoc, "//v:shape"_ostr, "adj"_ostr); sal_Int32 nTokenStart = 0; OUString sAngle = sAdjustments.getToken(0, ',', nTokenStart); CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(-7341733), sAngle.toInt32(), 2); OUString sRadius = sAdjustments.copy(nTokenStart); CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(5296), sRadius.toInt32(), 2); } CPPUNIT_TEST_FIXTURE(Test, testFontworkDirectColor) { // The document has a Fontwork shape with fill #2e8b57 plus 60% transparency and line color // #ff7f50 with 20% transparency. When exporting to docx, line color was not exported at all // and fill color was replaced with character color. loadFromFile(u"tdf51195_Fontwork_DirectColor.odt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save("Office Open XML Text"); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); static constexpr OString sElement = "//w:txbxContent/w:p/w:r/w:rPr/"_ostr; // Make sure the fallback in has correct value. assertXPath(pXmlDoc, sElement + "w:color", "val"_ostr, "2E8B57"); // ... and exists and has correct values. assertXPath(pXmlDoc, sElement + "w14:textOutline", 1); assertXPath(pXmlDoc, sElement + "w14:textOutline/w14:solidFill/w14:srgbClr", "val"_ostr, "ff7f50"); assertXPath(pXmlDoc, sElement + "w14:textOutline/w14:solidFill/w14:srgbClr/w14:alpha", "val"_ostr, "20000"); assertXPath(pXmlDoc, sElement + "w14:textOutline/w14:round", 1); // ... and w14:textFill exists and has correct values. assertXPath(pXmlDoc, sElement + "w14:textFill", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:srgbClr", "val"_ostr, "2e8b57"); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:srgbClr/w14:alpha", "val"_ostr, "60000"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkThemeColor) { // The document has a Fontwork shape with fill theme color 'lt2' and 50% darker, and a Fontwork // shape with theme color 'dk2' and 40% lighter. When exporting to docx, fill color was not // exported as theme color at all, and it was replaced with character color. loadFromFile(u"tdf51195_Fontwork_ThemeColor.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save("Office Open XML Text"); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // shape with 'darker' OString sElement = "/w:document/w:body/w:p[2]/w:r/mc:AlternateContent[1]/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure the fallback in has correct values assertXPath(pXmlDoc, sElement + "w:color", "val"_ostr, "948A54"); assertXPath(pXmlDoc, sElement + "w:color", "themeColor"_ostr, "light2"); assertXPath(pXmlDoc, sElement + "w:color", "themeShade"_ostr, "80"); // ... and w14:textFill exists and has correct values. assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr", "val"_ostr, "bg2"); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr/w14:lumMod", "val"_ostr, "50000"); // shape with 'lighter' sElement = "/w:document/w:body/w:p[2]/w:r/mc:AlternateContent[2]/mc:Choice/w:drawing/wp:anchor/" "a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/w:rPr/"_ostr; // Make sure the fallback in has correct values assertXPath(pXmlDoc, sElement + "w:color", "val"_ostr, "558ED5"); assertXPath(pXmlDoc, sElement + "w:color", "themeColor"_ostr, "dark2"); assertXPath(pXmlDoc, sElement + "w:color", "themeTint"_ostr, "99"); // ... and w14:textFill exists and has correct values. assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr", "val"_ostr, "tx2"); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr/w14:lumMod", "val"_ostr, "60000"); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr/w14:lumOff", "val"_ostr, "40000"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkDistance) { // LO ignores 'Spacing to Borders' of the 'Text Attributes' for Fontwork shapes. Word interprets // them. Make sure we force them to zero on export to docx, otherwise Word might wrap the text. loadFromFile(u"tdf51195_Fontwork_Distance.odt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save("Office Open XML Text"); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); assertXPathAttrs(pXmlDoc, "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:bodyPr"_ostr, { { "lIns", "0" }, { "rIns", "0" }, { "tIns", "0" }, { "bIns", "0" } }); } CPPUNIT_TEST_FIXTURE(Test, testFontworkLinGradientRGBColor) { // The document has a Fontwork shape with UI settings: linear gradient fill with angle 330deg, // start color #ffff00 (Yellow) with 'Intensity' 80%, end color #4682B4 (Steel Blue), Transition // Start 25% and solid transparency 30%. // Without fix the gradient was not exported at all. loadFromFile(u"tdf51195_Fontwork_linearGradient.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save("Office Open XML Text"); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // path to shape text run properties OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure w14:textFill and w14:gradFill elements exist with child elements assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); // 330deg gradient rotation = 120deg color transition direction assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:lin", "ang"_ostr, "7200000"); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:lin", "scaled"_ostr, "0"); // Make sure the color stops have correct position and color // The 'intensity' property in the UI has a different algorithm than the 'lumMod' attribute in // OOXML. Therefore it cannot be exported as 'lumMod' but need to be incorporated into the color. sElement += "w14:textFill/w14:gradFill/w14:gsLst/"; assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos"_ostr, "0"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr", "val"_ostr, "cccc00"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr/w14:alpha", "val"_ostr, "30000"); assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos"_ostr, "25000"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:srgbClr", "val"_ostr, "cccc00"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:srgbClr/w14:alpha", "val"_ostr, "30000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos"_ostr, "100000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr", "val"_ostr, "4682b4"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr/w14:alpha", "val"_ostr, "30000"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkAxialGradientTransparency) { // The document has a Fontwork shape with UI settings: solid fill theme color Accent3 25% darker, // Transparency gradient Type Axial with Angle 160deg, Transition start 40%, // Start value 5%, End value 90% // Without fix the gradient was not exported at all. loadFromFile(u"tdf51195_Fontwork_axialGradient.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save("Office Open XML Text"); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // path to shape text run properties OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure w14:textFill and w14:gradFill elements exist with child elements assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); // 160deg gradient rotation = 290deg (360deg-160deg+90deg) color transition direction assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:lin", "ang"_ostr, "17400000"); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:lin", "scaled"_ostr, "0"); // Make sure the color stops have correct position and color sElement += "w14:textFill/w14:gradFill/w14:gsLst/"; // gradient is in transparency, color is always the same. for (char ch = '1'; ch <= '3'; ++ch) { assertXPath(pXmlDoc, sElement + "w14:gs[" + OStringChar(ch) + "]/w14:schemeClr", "val"_ostr, "accent3"); assertXPath(pXmlDoc, sElement + "w14:gs[" + OStringChar(ch) + "]/w14:schemeClr/w14:lumMod", "val"_ostr, "75000"); } // transparency values are not exactly like in UI because converting through rgb-color. // border 40% in UI means 20% on each side. assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos"_ostr, "20000"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr/w14:alpha", "val"_ostr, "89800"); assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos"_ostr, "50000"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr/w14:alpha", "val"_ostr, "4710"); assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos"_ostr, "80000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:schemeClr/w14:alpha", "val"_ostr, "89800"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkRadialGradient) { // The document has a Fontwork shape with UI settings: gradient fill, Type radial, // From Color #40E0D0, To Color #FF0000, Center x|y 75%|20%, no transparency // Transition start 10% // Without fix the gradient was not exported at all. loadFromFile(u"tdf51195_Fontwork_radialGradient.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save("Office Open XML Text"); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // path to shape text run properties OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure w14:textFill and w14:gradFill elements exist with child elements assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path", "path"_ostr, "circle"); assertXPathAttrs(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path/w14:fillToRect", { { "l", "75000" }, { "t", "20000" }, { "r", "25000" }, { "b", "80000" } }); // Make sure the color stops have correct position and color // The first stop is duplicated to force Word to render the gradient same as LO. sElement += "w14:textFill/w14:gradFill/w14:gsLst/"; assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos"_ostr, "0"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr", "val"_ostr, "ff0000"); assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos"_ostr, "0"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:srgbClr", "val"_ostr, "ff0000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos"_ostr, "90000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr", "val"_ostr, "40e0d0"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkEllipticalGradient) { // The document has a Fontwork shape with UI settings: solid fill, Color #00008B (deep blue), // transparency gradient type Ellipsoid, Center x|y 50%|50%, Transition Start 50%, // Start 70%, End 0%. // Without fix the gradient was not exported at all. loadFromFile(u"tdf51195_Fontwork_ellipticalGradient.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save("Office Open XML Text"); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // path to shape text run properties OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure w14:textFill and w14:gradFill elements exist with child elements assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path", "path"_ostr, "circle"); assertXPathAttrs(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path/w14:fillToRect", { { "l", "50000" }, { "t", "50000" }, { "r", "50000" }, { "b", "50000" } }); // Make sure the color stops have correct position and color // transparency values are not exactly like in UI because converting through rgb-color. sElement += "w14:textFill/w14:gradFill/w14:gsLst/"; assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos"_ostr, "0"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr", "val"_ostr, "00008b"); // stop is duplicated to force Word to same rendering as LO does. assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos"_ostr, "0"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:srgbClr", "val"_ostr, "00008b"); assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos"_ostr, "50000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr", "val"_ostr, "00008b"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr/w14:alpha", "val"_ostr, "69800"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkSquareGradient) { // The document has a Fontwork shape with UI settings: gradient fill Type "Square (Quadratic)", // From Color #4963ef 40%, To Color #ffff6e 90%, Center x|y 100%|50%, // no transparency // Without fix the gradient was not exported at all. loadFromFile(u"tdf51195_Fontwork_squareGradient.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save("Office Open XML Text"); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // path to shape text run properties OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure w14:textFill and w14:gradFill elements exist with child elements assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path", "path"_ostr, "rect"); assertXPathAttrs(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path/w14:fillToRect", { { "l", "100000" }, { "t", "50000" }, { "r", "0" }, { "b", "50000" } }); // Make sure the color stops have correct position and color // The 'intensity' property in the UI has a different algorithm than the 'lumMod' attribute in // OOXML. Therefore it cannot be exported as 'lumMod' but need to be incorporated into the color. sElement += "w14:textFill/w14:gradFill/w14:gsLst/"; assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos"_ostr, "0"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr", "val"_ostr, "e6e663"); assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos"_ostr, "0"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:srgbClr", "val"_ostr, "e6e663"); assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos"_ostr, "100000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr", "val"_ostr, "1d4860"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkRectGradient) { // The document has a Fontwork shape with UI settings: solid color theme Accent 4 60% lighter, // transparency gradient Type "Rectangular", Center x|y 50%|50%, Transition start 10%, // Start value 70%, End value 5%. // Without fix the gradient was not exported at all. loadFromFile(u"tdf51195_Fontwork_rectGradient.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save("Office Open XML Text"); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport("word/document.xml"); // path to shape text run properties OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure w14:textFill and w14:gradFill elements exist with child elements assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path", "path"_ostr, "rect"); assertXPathAttrs(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path/w14:fillToRect", { { "l", "50000" }, { "t", "50000" }, { "r", "50000" }, { "b", "50000" } }); // Make sure the color stops have correct position and color // transparency values are not exactly like in UI because converting through rgb-color. sElement += "w14:textFill/w14:gradFill/w14:gsLst/"; assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos"_ostr, "0"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr", "val"_ostr, "accent4"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr/w14:lumMod", "val"_ostr, "40000"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr/w14:lumOff", "val"_ostr, "60000"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr/w14:alpha", "val"_ostr, "4710"); // The first stop is duplicated to force Word to render the gradient same as LO. assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos"_ostr, "0"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr", "val"_ostr, "accent4"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr/w14:lumMod", "val"_ostr, "40000"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr/w14:lumOff", "val"_ostr, "60000"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr/w14:alpha", "val"_ostr, "4710"); assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos"_ostr, "90000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:schemeClr", "val"_ostr, "accent4"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:schemeClr/w14:lumMod", "val"_ostr, "40000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:schemeClr/w14:lumOff", "val"_ostr, "60000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:schemeClr/w14:alpha", "val"_ostr, "69800"); } CPPUNIT_TEST_FIXTURE(Test, testThemeColorTransparency) { // The document has first a Fontwork shape with solid fill theme color with transparency and // outline transparency and second a textbox with character transparency. // Without fix the transparency was not written to file. loadFromFile(u"tdf139618_ThemeColorTransparency.pptx"); save("Impress Office Open XML"); xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); // Make sure a:alpha is written for line color and for fill color. // Make sure fill color is a schemeClr. OString sElement = "/p:sld/p:cSld/p:spTree/p:sp[1]/p:txBody/a:p/a:r/a:rPr/"_ostr; assertXPath(pXmlDoc, sElement + "a:ln/a:solidFill/a:srgbClr/a:alpha", "val"_ostr, "25000"); assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr", "val"_ostr, "accent1"); assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr/a:lumMod", "val"_ostr, "60000"); assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr/a:lumOff", "val"_ostr, "40000"); assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr/a:alpha", "val"_ostr, "35000"); // Make sure a:alpha is written for characters and fill color is a schemeClr. sElement = "/p:sld/p:cSld/p:spTree/p:sp[2]/p:txBody/a:p/a:r/a:rPr/"_ostr; assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr", "val"_ostr, "accent4"); assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr/a:lumMod", "val"_ostr, "75000"); assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr/a:alpha", "val"_ostr, "20000"); } CPPUNIT_TEST_FIXTURE(Test, testThemeFontTypeface) { // Saving the document had produced a file which PowerPoint wants to repair. The mandatory // attribute 'typeface' was missing in the elements. loadFromFile(u"tdf155412_typeface.pptx"); save("Impress Office Open XML"); xmlDocUniquePtr pXmlDoc = parseExport("ppt/theme/theme1.xml"); // Make sure typeface is written. OString sElement = "/a:theme/a:themeElements/a:fontScheme/"_ostr; assertXPath(pXmlDoc, sElement + "a:majorFont/a:ea", "typeface"_ostr, ""); assertXPath(pXmlDoc, sElement + "a:minorFont/a:ea", "typeface"_ostr, ""); } CPPUNIT_TEST_FIXTURE(Test, testTdf157289CircularArrowExport) { // The document has a custom shape of type "circular-arrow". Such uses a B command where // the ellipse bounding box is defined by bottom-right vertex first and then top-left vertex. // When saving to PPTX this had resulted in negative radii for the ellipse. loadFromFile(u"tdf157289_circularArrow_export.fodp"); save("Impress Office Open XML"); // Verify the markup. Both wR and hR must be positive. xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo[1]"_ostr, "wR"_ostr, "6750"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo[1]"_ostr, "hR"_ostr, "6750"); } CPPUNIT_TEST_FIXTURE(Test, testTdf134401_ExportAutoGrowToTextWordWrap) { // pptx doesn't have autoGrowWidth and autoGrowHeight, but it does have TextWordWrap // which is similar. If autoGrowWidth and autoGrowHeight are set in the document, // then they are exported to pptx as TextWordWrap = "none". loadFromFile(u"tdf134401_ExportAutoGrowToTextWordWrap.odp"); save("Impress Office Open XML"); // There are 2 shapes in the test file. // The 1. shape is without autoGrowWidth/Height. // The 2. shape is with autoGrowWidth/Height. // Check if wrap="none" is exported for shape 2, but no wrap is exported for shape 1. xmlDocUniquePtr pXmlDoc = parseExport("ppt/slides/slide1.xml"); assertXPathNoAttribute(pXmlDoc, "//p:sp[1]/p:txBody/a:bodyPr"_ostr, "wrap"_ostr); assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:bodyPr"_ostr, "wrap"_ostr, "none"); } } CPPUNIT_PLUGIN_IMPLEMENT(); /* vim:set shiftwidth=4 softtabstop=4 expandtab: */