/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #include #include #include "helper/qahelper.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include // defines of slot-IDs using namespace css; class ScShapeTest : public ScModelTestBase { public: ScShapeTest() : ScModelTestBase("sc/qa/unit/data") { } }; static SdrPage* lcl_getSdrPageWithAssert(ScDocument& rDoc) { ScDrawLayer* pDrawLayer = rDoc.GetDrawLayer(); CPPUNIT_ASSERT_MESSAGE("No ScDrawLayer", pDrawLayer); SdrPage* pPage = pDrawLayer->GetPage(0); CPPUNIT_ASSERT_MESSAGE("No draw page", pPage); return pPage; } static SdrObject* lcl_getSdrObjectWithAssert(ScDocument& rDoc, sal_uInt16 nObjNumber) { ScDrawLayer* pDrawLayer = rDoc.GetDrawLayer(); CPPUNIT_ASSERT_MESSAGE("No ScDrawLayer", pDrawLayer); const SdrPage* pPage = pDrawLayer->GetPage(0); CPPUNIT_ASSERT_MESSAGE("No draw page", pPage); SdrObject* pObj = pPage->GetObj(nObjNumber); OString sMsg = "no Object " + OString::number(nObjNumber); CPPUNIT_ASSERT_MESSAGE(sMsg.getStr(), pObj); return pObj; } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf144242_OpenBezier_noSwapWH) { // Shapes, which have rotation incorporated in their points, got erroneously width-height // swapped, because they report a rotation. (Rotation was introduced to align text with curve.) // Create a spreadsheet document with default row height and col width createScDoc(); // Insert default open Bezier curve ScTabViewShell* pTabViewShell = getViewShell(); SfxRequest aReq(pTabViewShell->GetViewFrame(), SID_DRAW_BEZIER_NOFILL); aReq.SetModifier(KEY_MOD1); // Ctrl pTabViewShell->ExecDraw(aReq); pTabViewShell->SetDrawShell(false); // Get document and newly created object ScDocument* pDoc = getScDoc(); SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Rotate object by 300deg pObj->Rotate(pObj->GetSnapRect().Center(), 30000_deg100, sin(toRadians(30000_deg100)), cos(toRadians(30000_deg100))); tools::Rectangle aExpectRect(pObj->GetSnapRect()); // Save, reload and compare saveAndReload("Calc Office Open XML"); pDoc = getScDoc(); pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); tools::Rectangle aSnapRect(pObj->GetSnapRect()); // Without fix in place width and height were swapped CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectRect, aSnapRect, 40); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf144242_Line_noSwapWH) { // Shapes, which have rotation incorporated in their points, got erroneously width-height // swapped, because they report a rotation. (Rotation was introduced to align text with line.) // Create a spreadsheet document with default row height and col width createScDoc(); // Insert default line ScTabViewShell* pTabViewShell = getViewShell(); SfxRequest aReq(pTabViewShell->GetViewFrame(), SID_DRAW_LINE); aReq.SetModifier(KEY_MOD1); // Ctrl pTabViewShell->ExecDraw(aReq); pTabViewShell->SetDrawShell(false); // Get document and newly created object ScDocument* pDoc = getScDoc(); SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Rotate object by 300deg pObj->Rotate(pObj->GetSnapRect().Center(), 30000_deg100, sin(toRadians(30000_deg100)), cos(toRadians(30000_deg100))); tools::Rectangle aExpectRect(pObj->GetSnapRect()); // Save, reload and compare saveAndReload("Calc Office Open XML"); pDoc = getScDoc(); pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); tools::Rectangle aSnapRect(pObj->GetSnapRect()); // Without fix in place width and height were swapped CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectRect, aSnapRect, 40); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf143619_validation_circle_pos) { // Load a document, which has validation circle around cell E6. createScDoc("ods/tdf143619_validationCirclePos.ods"); // Get document ScDocument* pDoc = getScDoc(); // Get shape. That is the validation circle. SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Error was, that deleting row and col before E6 does not move circle to D5, but to B3. // Delete first row and first column. goToCell("$A$1"); dispatchCommand(mxComponent, ".uno:DeleteRows", {}); goToCell("$A$1"); dispatchCommand(mxComponent, ".uno:DeleteColumns", {}); // Without fix in place the position was (2007, 833) Point aPos = pObj->GetSnapRect().TopLeft(); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(Point(6523, 1736), aPos, 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf140252_DragCreateFormControl) { // Error was, that drag-created form controls were initially not on layer 'controls' and thus // other shapes could be placed in front of form controls. // Load an empty document. createScDoc("ods/ManualColWidthRowHeight.ods"); // Get ScTabViewShell ScTabViewShell* pTabViewShell = getViewShell(); // drag-create a push button as example of form control SfxUInt16Item aIdentifierItem(SID_FM_CONTROL_IDENTIFIER, static_cast(SdrObjKind::FormButton)); SfxUInt32Item aInventorItem(SID_FM_CONTROL_INVENTOR, sal_uInt32(SdrInventor::FmForm)); const SfxPoolItem* pArgs[] = { &aIdentifierItem, &aInventorItem, nullptr }; pTabViewShell->GetViewData().GetDispatcher().Execute(SID_FM_CREATE_CONTROL, SfxCallMode::SYNCHRON, pArgs); // above includes creation of FuConstUnoControl and call of its Activate() method // get FuConstUnoControl ScTabView* pTabView = pTabViewShell->GetViewData().GetView(); CPPUNIT_ASSERT(pTabView); FuConstUnoControl* pFuConstUC = static_cast(pTabView->GetDrawFuncPtr()); CPPUNIT_ASSERT(pFuConstUC); // drag-create shape, points are in pixel MouseEvent aMouseEvent(Point(50, 100), 1, MouseEventModifiers::NONE, MOUSE_LEFT, 0); pFuConstUC->MouseButtonDown(aMouseEvent); aMouseEvent = MouseEvent(Point(200, 250), 1, MouseEventModifiers::DRAGMOVE, MOUSE_LEFT, 0); pFuConstUC->MouseMove(aMouseEvent); aMouseEvent = MouseEvent(Point(200, 250), 1, MouseEventModifiers::NONE, MOUSE_LEFT, 0); pFuConstUC->MouseButtonUp(aMouseEvent); pFuConstUC->Deactivate(); pTabViewShell->SetDrawShell(false); // Get document and newly created push button. ScDocument* pDoc = getScDoc(); SdrUnoObj* pObj = static_cast(lcl_getSdrObjectWithAssert(*pDoc, 0)); // Without the fix in place, the shape would be on layer SC_LAYER_FRONT (0) sal_Int16 nExpectedID = SC_LAYER_CONTROLS.get(); sal_Int16 nActualID = pObj->GetLayer().get(); CPPUNIT_ASSERT_EQUAL(nExpectedID, nActualID); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf134355_DragCreateCustomShape) { // Error was, that drag-created custom shapes were initially on layer "controls", although that // layer is exclusively for form controls. Effect was, that other shapes could not be brought in // front of custom shapes. // Load an empty document. createScDoc("ods/ManualColWidthRowHeight.ods"); // Get ScTabView ScTabViewShell* pTabViewShell = getViewShell(); ScTabView* pTabView = pTabViewShell->GetViewData().GetView(); // drag-create custom shape uno::Sequence aPropertyValues = { comphelper::makePropertyValue("SymbolShapes", OUString("smiley")), }; dispatchCommand(mxComponent, ".uno:SymbolShapes", aPropertyValues); // above includes creation of FuConstCustomShape and call of its Activate() method FuConstCustomShape* pFuConstCS = static_cast(pTabView->GetDrawFuncPtr()); CPPUNIT_ASSERT(pFuConstCS); // points are in pixel MouseEvent aMouseEvent(Point(50, 100), 1, MouseEventModifiers::NONE, MOUSE_LEFT, 0); pFuConstCS->MouseButtonDown(aMouseEvent); aMouseEvent = MouseEvent(Point(200, 250), 1, MouseEventModifiers::DRAGMOVE, MOUSE_LEFT, 0); pFuConstCS->MouseMove(aMouseEvent); aMouseEvent = MouseEvent(Point(200, 250), 1, MouseEventModifiers::NONE, MOUSE_LEFT, 0); pFuConstCS->MouseButtonUp(aMouseEvent); pFuConstCS->Deactivate(); pTabViewShell->SetDrawShell(false); // Get document and newly created custom shape. ScDocument* pDoc = getScDoc(); SdrObjCustomShape* pObj = static_cast(lcl_getSdrObjectWithAssert(*pDoc, 0)); // Without the fix in place, the shape would be on layer SC_LAYER_CONTROLS (3) sal_Int16 nExpectedID = SC_LAYER_FRONT.get(); sal_Int16 nActualID = pObj->GetLayer().get(); CPPUNIT_ASSERT_EQUAL(nExpectedID, nActualID); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf140252_LayerOfControl) { // Error was, that a newly inserted control shape was put on layer // "vorne" instead of layer "control". // Load an empty document. createScDoc("ods/ManualColWidthRowHeight.ods"); // Create default push button SfxUInt16Item aIdentifierItem(SID_FM_CONTROL_IDENTIFIER, static_cast(SdrObjKind::FormButton)); SfxUInt32Item aInventorItem(SID_FM_CONTROL_INVENTOR, sal_uInt32(SdrInventor::FmForm)); const SfxPoolItem* pArgs[] = { &aIdentifierItem, &aInventorItem, nullptr }; const SfxPoolItem* pInternalArgs[] = { nullptr }; ScTabViewShell* pTabViewShell = getViewShell(); pTabViewShell->GetViewData().GetDispatcher().Execute( SID_FM_CREATE_CONTROL, SfxCallMode::SYNCHRON, pArgs, KEY_MOD1, pInternalArgs); // Get document and newly created push button. ScDocument* pDoc = getScDoc(); SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Check LayerID of object. Without the fix in place it was 0. sal_Int16 nExpectedID = SC_LAYER_CONTROLS.get(); sal_Int16 nActualID = pObj->GetLayer().get(); CPPUNIT_ASSERT_EQUAL(nExpectedID, nActualID); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf137082_LTR_to_RTL) { // Before the fix for tdf137081 and tdf137082, when flipping sheet from LTR to RTL, page anchored // shapes were mirrored, but cell anchored shapes not. This was changed so, that shapes are always // mirrored. Graphics are still not mirrored but shifted. This test makes sure a shape is mirrored // and an image is not mirrored. createScDoc("ods/tdf137082_LTR_arrow_image.ods"); // Get document ScDocument* pDoc = getScDoc(); // Get objects and their transformation angles SdrObject* pObjCS = lcl_getSdrObjectWithAssert(*pDoc, 0); const Degree100 nRotateLTR = pObjCS->GetRotateAngle(); SdrObject* pObjImage = lcl_getSdrObjectWithAssert(*pDoc, 1); const Degree100 nShearLTR = pObjImage->GetShearAngle(); // Switch to RTL ScTabViewShell* pViewShell = getViewShell(); pViewShell->GetViewData().GetDispatcher().Execute(FID_TAB_RTL); // Check custom shape is mirrored, image not. const Degree100 nShearRTLActual = pObjImage->GetShearAngle(); CPPUNIT_ASSERT_EQUAL_MESSAGE("image should not be mirrored", nShearLTR.get(), nShearRTLActual.get()); const Degree100 nRotateRTLExpected = 36000_deg100 - nRotateLTR; const Degree100 nRotateRTLActual = pObjCS->GetRotateAngle(); CPPUNIT_ASSERT_EQUAL_MESSAGE("custom shape should be mirrored", nRotateRTLExpected.get(), nRotateRTLActual.get()); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf137082_RTL_cell_anchored) { // Error was, that cell anchored custom shapes wrote wrong offsets to file and thus were wrong on // reloading. The file contains one custom shape with "resize" and another one without. createScDoc("ods/tdf137082_RTL_cell_anchored.ods"); // Get document ScDocument* pDoc = getScDoc(); // Expected values. const Point aTopLeftA(-20500, 3500); // shape A without "resize" const Point aTopLeftB(-9500, 3500); // shape B with "resize" const Size aSize(2278, 5545); // both const tools::Rectangle aSnapRectA(aTopLeftA, aSize); const tools::Rectangle aSnapRectB(aTopLeftB, aSize); // Test reading was correct SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aSnapRectA, pObj->GetSnapRect(), 1); pObj = lcl_getSdrObjectWithAssert(*pDoc, 1); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aSnapRectB, pObj->GetSnapRect(), 1); // Save and reload. saveAndReload("calc8"); // Get document pDoc = getScDoc(); // And test again pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aSnapRectA, pObj->GetSnapRect(), 1); pObj = lcl_getSdrObjectWithAssert(*pDoc, 1); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aSnapRectB, pObj->GetSnapRect(), 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf137081_RTL_page_anchored) { // Error was, that page anchored lines and custom shapes were mirrored on opening. The document // contains measure line, polyline and transformed custom shape. createScDoc("ods/tdf137081_RTL_page_anchored.ods"); // Get document ScDocument* pDoc = getScDoc(); // Expected values. // Measure line const Point aStart(-3998, 2490); const Point aEnd(-8488, 5490); // Polyline const Point aFirst(-10010, 2500); const Point aSecond(-14032, 5543); const Point aThird(-14500, 3500); // Custom shape const Point aTopLeft(-20500, 4583); // Test reading was correct SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Measure line CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aStart, pObj->GetPoint(0), 1); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aEnd, pObj->GetPoint(1), 1); // Polyline pObj = lcl_getSdrObjectWithAssert(*pDoc, 1); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aFirst, pObj->GetPoint(0), 1); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aSecond, pObj->GetPoint(1), 1); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aThird, pObj->GetPoint(2), 1); //Custom shape SdrObjCustomShape* pObjCS = static_cast(lcl_getSdrObjectWithAssert(*pDoc, 2)); CPPUNIT_ASSERT(!pObjCS->IsMirroredX()); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aTopLeft, pObjCS->GetLogicRect().TopLeft(), 1); // Save and reload. saveAndReload("calc8"); // Get document pDoc = getScDoc(); // And test again pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Measure line CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aStart, pObj->GetPoint(0), 1); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aEnd, pObj->GetPoint(1), 1); // Polyline pObj = lcl_getSdrObjectWithAssert(*pDoc, 1); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aFirst, pObj->GetPoint(0), 1); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aSecond, pObj->GetPoint(1), 1); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aThird, pObj->GetPoint(2), 1); //Custom shape pObjCS = static_cast(lcl_getSdrObjectWithAssert(*pDoc, 2)); CPPUNIT_ASSERT(!pObjCS->IsMirroredX()); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aTopLeft, pObjCS->GetLogicRect().TopLeft(), 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf139583_Rotate180deg) { // Load an empty document. createScDoc("ods/ManualColWidthRowHeight.ods"); // Get document and draw page ScDocument* pDoc = getScDoc(); SdrPage* pPage = lcl_getSdrPageWithAssert(*pDoc); // Insert Shape const tools::Rectangle aRect(Point(3000, 4000), Size(5000, 2000)); ScDrawLayer* pDrawLayer = pDoc->GetDrawLayer(); CPPUNIT_ASSERT_MESSAGE("No ScDrawLayer", pDrawLayer); rtl::Reference pObj = new SdrRectObj(*pDrawLayer, aRect); CPPUNIT_ASSERT_MESSAGE("Could not create rectangle", pObj); pPage->InsertObject(pObj.get()); // Anchor "to cell (resize with cell)" and then rotate it by 180deg around center // The order is important here. ScDrawLayer::SetCellAnchoredFromPosition(*pObj, *pDoc, 0 /*SCTAB*/, true /*bResizeWithCell*/); pObj->Rotate(aRect.Center(), Degree100(18000), 0.0, -1.0); pObj.clear(); // Save and reload. saveAndReload("calc8"); // Get document and object pDoc = getScDoc(); pObj = static_cast(lcl_getSdrObjectWithAssert(*pDoc, 0)); // Without the fix in place, the shape would have nearly zero size. CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aRect, pObj->GetSnapRect(), 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf137033_FlipHori_Resize) { // Load a document, which has a rotated custom shape, which is horizontal flipped. Error was, that // if such shape was anchored "resize with cell", then after save and reload it was distorted. createScDoc("ods/tdf137033_FlipHoriRotCustomShape.ods"); // Get document and shape ScDocument* pDoc = getScDoc(); SdrObjCustomShape* pObj = static_cast(lcl_getSdrObjectWithAssert(*pDoc, 0)); // Verify shape is correctly loaded. Then set shape to "resize with cell". tools::Rectangle aSnapRect(pObj->GetSnapRect()); const tools::Rectangle aExpectRect(Point(4998, 7000), Size(9644, 6723)); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectRect, aSnapRect, 1); ScDrawLayer::SetCellAnchoredFromPosition(*pObj, *pDoc, 0 /*SCTAB*/, true /*bResizeWithCell*/); // Save and reload. saveAndReload("calc8"); // Get document and shape pDoc = getScDoc(); pObj = static_cast(lcl_getSdrObjectWithAssert(*pDoc, 0)); // Check shape has the original geometry, besides rounding and unit conversion errors aSnapRect = pObj->GetSnapRect(); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectRect, aSnapRect, 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf137033_RotShear_ResizeHide) { // For rotated or sheared shapes anchored "To Cell (resize with cell) hiding rows or columns will // not only change size but rotation and shear angle too. Error was, that not the original angles // of the full sized shape were written to file but the changed one. // Load a document, which has a rotated and sheared shape, anchored to cell with resize. createScDoc("ods/tdf137033_RotShearResizeAnchor.ods"); // Get document ScDocument* pDoc = getScDoc(); // Hide rows 4 and 5 (UI number), which are inside the shape and thus change shape geometry pDoc->SetRowHidden(3, 4, 0, true); pDoc->SetDrawPageSize(0); // trigger recalcpos, otherwise shapes are not changed // Get shape SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Verify hiding has changed shape geometry as expected tools::Rectangle aSnapRect(pObj->GetSnapRect()); Degree100 aRotateAngle(pObj->GetRotateAngle()); Degree100 aShearAngle(pObj->GetShearAngle()); // mathematical exact would be Point(3868, 4795), Size(9763, 1909) // current values as of LO 7.2 const tools::Rectangle aExpectRect(Point(3875, 4796), Size(9760, 1911)); const Degree100 aExpectRotateAngle(20925_deg100); const Degree100 aExpectShearAngle(-6570_deg100); CPPUNIT_ASSERT_MESSAGE("Hide rows, shear angle: ", abs(aShearAngle - aExpectShearAngle) <= 1_deg100); CPPUNIT_ASSERT_MESSAGE("Hide rows, rotate angle: ", abs(aRotateAngle - aExpectRotateAngle) <= 1_deg100); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectRect, aSnapRect, 1); // Save and reload. saveAndReload("calc8"); // Get document and shape pDoc = getScDoc(); pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Check shape has the original geometry, besides heavy rounding and unit conversion errors aSnapRect = pObj->GetSnapRect(); aRotateAngle = pObj->GetRotateAngle(); aShearAngle = pObj->GetShearAngle(); CPPUNIT_ASSERT_MESSAGE("Reload, shear angle: ", abs(aShearAngle - aExpectShearAngle) <= 3_deg100); CPPUNIT_ASSERT_MESSAGE("Reload, rotate angle: ", abs(aRotateAngle - aExpectRotateAngle) <= 3_deg100); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectRect, aSnapRect, 7); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf137033_RotShear_Hide) { // Hiding row or columns affect cell anchored shape based on their snap rectangle. The first // attempt to fix lost position has used the logic rect instead. For rotated or sheared shape it // makes a difference. // Load a document, which has a rotated and sheared shape, anchored to cell, without resize. createScDoc("ods/tdf137033_RotShearCellAnchor.ods"); // Get document ScDocument* pDoc = getScDoc(); // Hide column C, which is left from logic rect, but right from left edge of snap rect pDoc->SetColHidden(2, 2, 0, true); pDoc->SetDrawPageSize(0); // trigger recalcpos, otherwise shapes are not changed // Save and reload. saveAndReload("calc8"); // Get document and shape pDoc = getScDoc(); SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Check shape is visible. With the old version, the shape was moved to column C and // thus hidden on reload. CPPUNIT_ASSERT_MESSAGE("Reload: Shape has to be visible", pObj->IsVisible()); // Verify position and size are unchanged besides rounding and unit conversion errors // Values are manually taken from shape before hiding column C. const tools::Rectangle aExpectRect(Point(4500, 3500), Size(15143, 5187)); const tools::Rectangle aSnapRect = pObj->GetSnapRect(); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectRect, aSnapRect, 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf137576_LogicRectInDefaultMeasureline) { // Error was, that the empty logical rectangle of a default measure line (Ctrl+Click) // resulted in zeros in NonRotatedAnchor and a wrong position when reloading. // Load an empty document. createScDoc("ods/ManualColWidthRowHeight.ods"); // Create default measureline by SfxRequest that corresponds to Ctrl+Click ScTabViewShell* pTabViewShell = getViewShell(); SfxRequest aReq(pTabViewShell->GetViewFrame(), SID_DRAW_MEASURELINE); aReq.SetModifier(KEY_MOD1); // Ctrl pTabViewShell->ExecDraw(aReq); // Get document and newly created measure line. ScDocument* pDoc = getScDoc(); SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Anchor "to Cell (resize with cell)" ScDrawLayer::SetCellAnchoredFromPosition(*pObj, *pDoc, 0 /*SCTAB*/, true /*bResizeWithCell*/); // Deselect shape and switch to object selection type "Cell". pTabViewShell->SetDrawShell(false); // Hide column A. goToCell("$A$1"); dispatchCommand(mxComponent, ".uno:HideColumn", {}); // Get current position. I will not use absolute values for comparison, because document is loaded // in full screen mode of unknown size and default object is placed in center of window. Point aOldPos = pObj->GetRelativePos(); // Save and reload, get ScDocShell saveAndReload("calc8"); // Get document and object pDoc = getScDoc(); pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Assert object position is unchanged, besides Twips<->Hmm inaccuracy. Point aNewPos = pObj->GetRelativePos(); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aOldPos, aNewPos, 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf137576_LogicRectInNewMeasureline) { // Error was, that a new measure line had no logical rectangle. This resulted in zeros in // NonRotatedAnchor. As a result the position was wrong when reloading. // Load an empty document createScDoc("ods/ManualColWidthRowHeight.ods"); // Get document and draw page ScDocument* pDoc = getScDoc(); SdrPage* pPage = lcl_getSdrPageWithAssert(*pDoc); // Create a new measure line and insert it Point aStartPoint(5000, 5500); Point aEndPoint(13000, 8000); ScDrawLayer* pDrawLayer = pDoc->GetDrawLayer(); CPPUNIT_ASSERT_MESSAGE("No ScDrawLayer", pDrawLayer); rtl::Reference pObj = new SdrMeasureObj(*pDrawLayer, aStartPoint, aEndPoint); CPPUNIT_ASSERT_MESSAGE("Could not create measure line", pObj); pPage->InsertObject(pObj.get()); // Anchor "to cell (resize with cell)" and examine NonRotatedAnchor ScDrawLayer::SetCellAnchoredFromPosition(*pObj, *pDoc, 0 /*SCTAB*/, true /*bResizeWithCell*/); ScDrawObjData* pNData = ScDrawLayer::GetNonRotatedObjData(pObj.get()); CPPUNIT_ASSERT_MESSAGE("Failed to get NonRotatedAnchor", pNData); // Without the fix all four values would be zero. CPPUNIT_ASSERT_EQUAL(SCCOL(1), pNData->maStart.Col()); CPPUNIT_ASSERT_EQUAL(SCROW(2), pNData->maStart.Row()); CPPUNIT_ASSERT_EQUAL(SCCOL(7), pNData->maEnd.Col()); CPPUNIT_ASSERT_EQUAL(SCROW(2), pNData->maEnd.Row()); pObj.clear(); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testMeasurelineHideColSave) { // The document contains a SdrMeasureObj anchored "To Cell (resize with cell)" with start in cell // D11 and end in cell I5. Error was, that after hiding col A and saving, start and end point // position were lost. createScDoc("ods/measurelineHideColSave.ods"); // Get document and shape ScDocument* pDoc = getScDoc(); SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Make sure loading is correct Point aStartPoint(7500, 15000); // according UI Point aEndPoint(17500, 8000); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aStartPoint, pObj->GetPoint(0), 1); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aEndPoint, pObj->GetPoint(1), 1); // Hide column A pDoc->SetColHidden(0, 0, 0, true); pDoc->SetDrawPageSize(0); // trigger recalcpos, otherwise shapes are not changed // Shape should move by column width, here 3000 aStartPoint.Move(-3000, 0); aEndPoint.Move(-3000, 0); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aStartPoint, pObj->GetPoint(0), 1); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aEndPoint, pObj->GetPoint(1), 1); // save and reload saveAndReload("calc8"); // Get document and shape pDoc = getScDoc(); pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Check that start and end point are unchanged besides rounding and unit conversion errors CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aStartPoint, pObj->GetPoint(0), 2); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aEndPoint, pObj->GetPoint(1), 2); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testHideColsShow) { // The document contains a shape anchored "To Cell (resize with cell)" with starts in cell C3 and //ends in cell D5. Error was, that hiding cols C and D and then show them again extends the shape // to column E createScDoc("ods/hideColsShow.ods"); // Get document and shape ScDocument* pDoc = getScDoc(); SdrObjCustomShape* pObj = static_cast(lcl_getSdrObjectWithAssert(*pDoc, 0)); CPPUNIT_ASSERT_MESSAGE("Load: Object should be visible", pObj->IsVisible()); tools::Rectangle aSnapRectOrig(pObj->GetSnapRect()); // Hide cols C and D. goToCell("$C$1:$D$1"); ScTabViewShell* pViewShell = getViewShell(); pViewShell->GetViewData().GetDispatcher().Execute(FID_COL_HIDE); // Check object is invisible CPPUNIT_ASSERT_MESSAGE("Hide: Object should be invisible", !pObj->IsVisible()); // Show cols C and D goToCell("$C$1:$D$1"); pViewShell->GetViewData().GetDispatcher().Execute(FID_COL_SHOW); // Check object is visible and has old size CPPUNIT_ASSERT_MESSAGE("Show: Object should be visible", pObj->IsVisible()); tools::Rectangle aSnapRectShow(pObj->GetSnapRect()); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aSnapRectOrig, aSnapRectShow, 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testFormSizeWithHiddenCol) { // The document contains a form (Listbox) shape anchored "To Cell (resize with cell)" with starts in cell B5 and // ends in cell D5. The error was the form shape was resized if there was hidden col/row. createScDoc("ods/tdf154005.ods"); // Get document and shape ScDocument* pDoc = getScDoc(); SdrUnoObj* pObj = static_cast(lcl_getSdrObjectWithAssert(*pDoc, 0)); // Check Position and Size pDoc->SetDrawPageSize(0); // trigger recalcpos tools::Rectangle aRect(2432, 3981, 4932, 4631); // expected snap rect from values in file const tools::Rectangle& rShapeRect(pObj->GetSnapRect()); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aRect, rShapeRect, 1); // Check anchor ScDrawObjData* pData = ScDrawLayer::GetObjData(pObj); CPPUNIT_ASSERT_MESSAGE("expected object meta data", pData); const OUString sActual("start col " + OUString::number(pData->maStart.Col()) + " row " + OUString::number(pData->maStart.Row()) + " end col " + OUString::number(pData->maEnd.Col()) + " row " + OUString::number(pData->maEnd.Row())); CPPUNIT_ASSERT_EQUAL(OUString("start col 1 row 4 end col 3 row 4"), sActual); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf138138_MoveCellWithRotatedShape) { // The document contains a 90deg rotated, cell-anchored rectangle in column D. Insert 2 columns // after column B, save and reload. The shape was not correctly moved to column F. createScDoc("ods/tdf138138_MoveCellWithRotatedShape.ods"); // Get document and shape ScDocument* pDoc = getScDoc(); SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Check anchor and position of shape. The expected values are taken from UI. tools::Rectangle aSnapRect = pObj->GetSnapRect(); tools::Rectangle aExpectedRect(Point(10000, 3000), Size(1000, 7500)); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectedRect, aSnapRect, 1); // Insert two columns after column B goToCell("$A$1:$B$1"); ScTabViewShell* pViewShell = getViewShell(); pViewShell->GetViewData().GetDispatcher().Execute(FID_INS_COLUMNS_AFTER); aExpectedRect = tools::Rectangle(Point(16000, 3000), Size(1000, 7500)); // col width 3000 aSnapRect = pObj->GetSnapRect(); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectedRect, aSnapRect, 1); // Save and reload saveAndReload("calc8"); // Get document and shape pDoc = getScDoc(); pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Assert objects size is unchanged, position is shifted. aSnapRect = pObj->GetSnapRect(); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectedRect, aSnapRect, 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testLoadVerticalFlip) { // The document has a cell anchored custom shape with vertical flip. Error was, that the // flip was lost on loading. createScDoc("ods/loadVerticalFlip.ods"); // Get document and shape ScDocument* pDoc = getScDoc(); SdrObjCustomShape* pObj = static_cast(lcl_getSdrObjectWithAssert(*pDoc, 0)); // Check that shape is flipped CPPUNIT_ASSERT_MESSAGE("Load: Object should be vertically flipped", pObj->IsMirroredY()); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf117948_CollapseBeforeShape) { // The document contains a column group left from the image. The group is expanded. Collapse the // group, save and reload. The original error was, that the line was on wrong position after reload. // After the fix for 'resize with cell', the custom shape had wrong position and size too. createScDoc("ods/tdf117948_CollapseBeforeShape.ods"); // Get document and objects ScDocument* pDoc = getScDoc(); SdrObject* pObj0 = lcl_getSdrObjectWithAssert(*pDoc, 0); SdrObject* pObj1 = lcl_getSdrObjectWithAssert(*pDoc, 1); // Collapse the group ScTabViewShell* pViewShell = getViewShell(); pViewShell->GetViewData().SetCurX(1); pViewShell->GetViewData().SetCurY(0); pViewShell->GetViewData().GetDispatcher().Execute(SID_OUTLINE_HIDE); // Check anchor and position of shape. The expected values are taken from UI before saving. tools::Rectangle aSnapRect0Collapse = pObj0->GetSnapRect(); tools::Rectangle aExpectedRect0(Point(4672, 1334), Size(1787, 1723)); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectedRect0, aSnapRect0Collapse, 1); tools::Rectangle aSnapRect1Collapse = pObj1->GetSnapRect(); tools::Rectangle aExpectedRect1(Point(5647, 4172), Size(21, 3441)); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectedRect1, aSnapRect1Collapse, 1); // Save and reload saveAndReload("calc8"); // Get document and objects pDoc = getScDoc(); pObj0 = lcl_getSdrObjectWithAssert(*pDoc, 0); pObj1 = lcl_getSdrObjectWithAssert(*pDoc, 1); // Assert objects size and position are not changed. Actual values differ a little bit // because of cumulated Twips-Hmm conversion errors. tools::Rectangle aSnapRect0Reload = pObj0->GetSnapRect(); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectedRect0, aSnapRect0Reload, 2); tools::Rectangle aSnapRect1Reload = pObj1->GetSnapRect(); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectedRect1, aSnapRect1Reload, 2); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf137355_UndoHideRows) { // The document contains a shape anchored "To Cell" with start in cell C3 and end in cell D6. // Error was, that hiding rows 3 to 6 and undo that action "lost" the shape. // Actually it was not lost but hidden. createScDoc("ods/tdf137355_UndoHideRows.ods"); // Get document and shape ScDocument* pDoc = getScDoc(); SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); CPPUNIT_ASSERT_MESSAGE("Load: Object should be visible", pObj->IsVisible()); tools::Rectangle aSnapRectOrig(pObj->GetSnapRect()); // Hide rows 3 to 6 in UI. [Note: Simple pDoc->SetRowHidden(2,5,0,true) does not work, because it // does not produce the needed undo items.] goToCell("$A$3:$A$6"); ScTabViewShell* pViewShell = getViewShell(); pViewShell->GetViewData().GetDispatcher().Execute(FID_ROW_HIDE); // Check object is invisible CPPUNIT_ASSERT_MESSAGE("Hide: Object should be invisible", !pObj->IsVisible()); // Undo pViewShell->GetViewData().GetDispatcher().Execute(SID_UNDO); // Check object is visible and has old size CPPUNIT_ASSERT_MESSAGE("Undo: Object should exist", pObj); CPPUNIT_ASSERT_MESSAGE("Undo: Object should be visible", pObj->IsVisible()); tools::Rectangle aSnapRectUndo(pObj->GetSnapRect()); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aSnapRectOrig, aSnapRectUndo, 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf152081_UndoHideColsWithNotes) { createScDoc("ods/tdf152081_UndoHideColsWithNotes.ods"); // Get document and shape ScDocument* pDoc = getScDoc(); SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); CPPUNIT_ASSERT_MESSAGE("Load: Note object should be visible", pObj->IsVisible()); // Hide B column goToCell("$B$2:$B$2"); ScTabViewShell* pViewShell = getViewShell(); pViewShell->GetViewData().GetDispatcher().Execute(FID_COL_HIDE); // Check object is invisible CPPUNIT_ASSERT_MESSAGE("Hide: Note object should be invisible", !pObj->IsVisible()); // Undo pViewShell->GetViewData().GetDispatcher().Execute(SID_UNDO); // Check object is visible CPPUNIT_ASSERT_MESSAGE("Undo: Note object should exist", pObj); CPPUNIT_ASSERT_MESSAGE("Undo: Note object should be visible", pObj->IsVisible()); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf115655_HideDetail) { // The document contains an image inside a cell anchored "To Cell (resize with cell)". The cell // belongs to a group. On loading the group is expanded. // Error was, that after collapsing the group, save and reload, and expanding the group, the image // was "lost". Actually is was resized to zero height. createScDoc("ods/tdf115655_HideDetail.ods"); // Get document and image ScDocument* pDoc = getScDoc(); SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Get image size tools::Rectangle aSnapRectOrig = pObj->GetSnapRect(); // Collapse the group ScTabViewShell* pViewShell = getViewShell(); pViewShell->GetViewData().SetCurX(0); pViewShell->GetViewData().SetCurY(1); pViewShell->GetViewData().GetDispatcher().Execute(SID_OUTLINE_HIDE); CPPUNIT_ASSERT_MESSAGE("Collapse: Image should not be visible", !pObj->IsVisible()); // Save and reload saveAndReload("calc8"); // Get document and image pDoc = getScDoc(); pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Expand the group pViewShell = getViewShell(); pViewShell->GetViewData().SetCurX(0); pViewShell->GetViewData().SetCurY(1); pViewShell->GetViewData().GetDispatcher().Execute(SID_OUTLINE_SHOW); CPPUNIT_ASSERT_MESSAGE("Expand: Image should be visible", pObj->IsVisible()); // Assert image size is not changed tools::Rectangle aSnapRectReload = pObj->GetSnapRect(); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aSnapRectOrig, aSnapRectReload, 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testFitToCellSize) { // The document has a cell anchored custom shape. Applying // FitToCellSize should resize and position the shape so, // that it fits into its anchor cell. That did not happened. createScDoc("ods/tdf119191_FitToCellSize.ods"); // Get document and shape ScDocument* pDoc = getScDoc(); SdrObjCustomShape* pObj = dynamic_cast(lcl_getSdrObjectWithAssert(*pDoc, 0)); // Get the draw view of the document ScTabViewShell* pViewShell = getViewShell(); ScDrawView* pDrawView = pViewShell->GetViewData().GetScDrawView(); CPPUNIT_ASSERT(pDrawView); // Select the shape pDrawView->MarkNextObj(); CPPUNIT_ASSERT(pDrawView->AreObjectsMarked()); // Fit selected shape into cell pViewShell->GetViewData().GetDispatcher().Execute(SID_FITCELLSIZE); const tools::Rectangle& rShapeRect(pObj->GetSnapRect()); const tools::Rectangle aCellRect = pDoc->GetMMRect(1, 1, 1, 1, 0); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aCellRect, rShapeRect, 2); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testCustomShapeCellAnchoredRotatedShape) { // The example doc contains a cell anchored custom shape that is rotated // and sheared. Error was, that the shape lost position and size on // loading. createScDoc("ods/tdf119191_transformedShape.ods"); // Get document and shape ScDocument* pDoc = getScDoc(); SdrObjCustomShape* pObj = dynamic_cast(lcl_getSdrObjectWithAssert(*pDoc, 0)); // Check Position and Size pDoc->SetDrawPageSize(0); // trigger recalcpos tools::Rectangle aRect(2400, 751, 5772, 3694); // expected snap rect from values in file const tools::Rectangle& rShapeRect(pObj->GetSnapRect()); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aRect, rShapeRect, 1); // Check anchor ScDrawObjData* pData = ScDrawLayer::GetObjData(pObj); CPPUNIT_ASSERT_MESSAGE("expected object meta data", pData); const OUString sActual("start col " + OUString::number(pData->maStart.Col()) + " row " + OUString::number(pData->maStart.Row()) + " end col " + OUString::number(pData->maEnd.Col()) + " row " + OUString::number(pData->maEnd.Row())); CPPUNIT_ASSERT_EQUAL(OUString("start col 1 row 1 end col 2 row 8"), sActual); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testLargeAnchorOffset) { // The example doc contains a resize-with-cell-anchored measure line // with a large vertical offset that shifts the start point onto the // next cell below. createScDoc("ods/LargeAnchorOffset.ods"); ScDocument* pDoc = getScDoc(); SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); const Point aOldPos = pObj->GetRelativePos(); // Just to check that it imports correctly CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(Point(9504, 9089), aOldPos, 1); saveAndReload("calc8"); pDoc = getScDoc(); pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); // Without the fix, this would fail: // Test name: sc_apitest::ScShapeTest::testLargeAnchorOffset // assertion failed // - Expression: std::abs(rExpected.Y() - rActual.Y()) <= nTolerance // - after reload Y expected 9089 actual 9643 Tolerance 1 const Point aNewPos = pObj->GetRelativePos(); CPPUNIT_ASSERT_POINT_EQUAL_WITH_TOLERANCE(aOldPos, aNewPos, 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf139083_copy_without_resize) { // Load a document, which has a shape anchored to cell B2, but without 'resize with cell'. // When the range B2:B3 is copied and pasted to D5, then the copied shape should keep its size. createScDoc("ods/tdf139083_copy_without_resize.ods"); // Get document ScDocument* pDoc = getScDoc(); // Copy cells B2:B3. They have row height 2cm and column width 3cm. goToCell("$B$2:$B$3"); dispatchCommand(mxComponent, ".uno:Copy", {}); // Paste to D5. There are row height 0.5cm and column width 1cm. goToCell("$D$5"); dispatchCommand(mxComponent, ".uno:Paste", {}); // Make sure original and pasted shape have the same size. // Size of original shape is 2001x3002, without fix size of pasted shape was 668x750. SdrObject* pObjOrig = lcl_getSdrObjectWithAssert(*pDoc, 0); // original shape SdrObject* pObjPasted = lcl_getSdrObjectWithAssert(*pDoc, 1); // pasted shape CPPUNIT_ASSERT_DOUBLES_EQUAL(2001, pObjOrig->GetSnapRect().GetWidth(), 1); CPPUNIT_ASSERT_DOUBLES_EQUAL(3002, pObjOrig->GetSnapRect().GetHeight(), 1); CPPUNIT_ASSERT_DOUBLES_EQUAL(2001, pObjPasted->GetSnapRect().GetWidth(), 1); CPPUNIT_ASSERT_DOUBLES_EQUAL(3002, pObjPasted->GetSnapRect().GetHeight(), 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf155093_double_names) { // Load a document, which has a shape in range B6:C14 with name "myArrow". When the range was // copied and pasted, then the copied shape got the same name and thus was not accessible with // Navigator. createScDoc("ods/tdf155093_double_names.ods"); ScDocument* pDoc = getScDoc(); // Copy and paste goToCell("$B$6:$C$14"); dispatchCommand(mxComponent, ".uno:Copy", {}); goToCell("$D$16"); dispatchCommand(mxComponent, ".uno:Paste", {}); // Make sure original and pasted shape have different names. SdrObject* pObjOrig = lcl_getSdrObjectWithAssert(*pDoc, 0); // original shape SdrObject* pObjPasted = lcl_getSdrObjectWithAssert(*pDoc, 1); // pasted shape CPPUNIT_ASSERT(pObjOrig->GetName() != pObjPasted->GetName()); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf155095_shape_collapsed_group) { // Load a document, which has a shape in range C9:C16, anchored 'To cell (resize with cell)'. // The rows 11 to 14 are in a collapsed group. So the shape effectively spans 4 rows. When // copying the range B5:C19 and pasting it to B22, the group is expanded and the shape should // increase its height so that it spans 8 rows. createScDoc("ods/tdf155095_shape_over_collapsed_group.ods"); ScDocument* pDoc = getScDoc(); // Copy and paste goToCell("$B$5:$C$19"); dispatchCommand(mxComponent, ".uno:Copy", {}); goToCell("$B$22"); dispatchCommand(mxComponent, ".uno:Paste", {}); // Make sure the shape has the correct size and spans C26:C33 SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 1); // pasted shape // Without fix the shape had position(6708,11564) and size(407,2013). tools::Rectangle aExpectedRect(tools::Rectangle(Point(6708, 10743), Size(407, 3473))); tools::Rectangle aSnapRect(pObj->GetSnapRect()); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectedRect, aSnapRect, 1); // Without fix the shape spans C28:C32 ScDrawObjData* pObjData = ScDrawLayer::GetObjData(pObj); ScAddress aExpectedStart(SCCOL(2), SCROW(25), SCTAB(0)); // zero based ScAddress aExpectedEnd(SCCOL(2), SCROW(32), SCTAB(0)); CPPUNIT_ASSERT_EQUAL(aExpectedStart, (*pObjData).maStart); CPPUNIT_ASSERT_EQUAL(aExpectedEnd, (*pObjData).maEnd); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf155094_paste_transposed) { // Load a document, which has a page anchored shape "Red" in C4, a cell anchored shape "Green" in // D4 and a cell anchored shape "Blue" with 'resize with cell' in E4. The range C3:E5 is copied // and pasted with 'Transpose all' to cell K6. The pasted content had these errors: // Pasted shape "Red" was missing. // Pasted shape "Green" was resized although 'resize with cell' was not set. // Pasted shape "Blue" was in cell K5 instead of L8. // The behavior of paste transposed is changed since LO 7.6 so that no shape is resized. createScDoc("ods/tdf155094_paste_transposed.ods"); ScDocument* pDoc = getScDoc(); // Copy and paste goToCell("$C$3:$E$5"); dispatchCommand(mxComponent, ".uno:Copy", {}); goToCell("$K$6"); uno::Sequence aPropertyValues = { comphelper::makePropertyValue("Flags", OUString("A")), comphelper::makePropertyValue("FormulaCommand", sal_uInt16(0)), comphelper::makePropertyValue("SkipEmptyCells", false), comphelper::makePropertyValue("Transpose", true), comphelper::makePropertyValue("AsLink", false), comphelper::makePropertyValue("MoveMode", sal_uInt16(4)) }; dispatchCommand(mxComponent, ".uno:InsertContents", aPropertyValues); // Without fix there had been only 5 object. ScDrawLayer* pDrawLayer = pDoc->GetDrawLayer(); CPPUNIT_ASSERT_MESSAGE("No ScDrawLayer", pDrawLayer); const SdrPage* pPage = pDrawLayer->GetPage(0); CPPUNIT_ASSERT_MESSAGE("No draw page", pPage); CPPUNIT_ASSERT_EQUAL(size_t(6), pPage->GetObjCount()); // Without fix pasted object had position(7972, 8616) and size(1805×801). SdrObject* pObjGreen = lcl_getSdrObjectWithAssert(*pDoc, 4); // pasted shape "Green" tools::Rectangle aExpectedRect(tools::Rectangle(Point(12489, 12609), Size(800, 800))); tools::Rectangle aSnapRect(pObjGreen->GetSnapRect()); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectedRect, aSnapRect, 1); // Without fix the pasted object was at wrong position(10230,8616). // Since LO 7.6 the pasted object has the same size as the original shape "Blue". SdrObject* pObjBlue = lcl_getSdrObjectWithAssert(*pDoc, 5); aExpectedRect = tools::Rectangle(Point(12489, 14612), Size(800, 800)); aSnapRect = pObjBlue->GetSnapRect(); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpectedRect, aSnapRect, 1); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf155091_paste_duplicates) { // Load a document, which has a shape in range C6:C16, anchored 'To cell (resize with cell)'. // The rows 6 to 9 are filtered. When copying the range B5:C19 and paste it to B23, the // shape was pasted twice. createScDoc("ods/tdf155091_paste_duplicates.ods"); ScDocument* pDoc = getScDoc(); // Copy and paste goToCell("$B$5:$C$19"); dispatchCommand(mxComponent, ".uno:Copy", {}); goToCell("$B$23"); dispatchCommand(mxComponent, ".uno:Paste", {}); // Make sure there is no third object but only original and pasted one. ScDrawLayer* pDrawLayer = pDoc->GetDrawLayer(); CPPUNIT_ASSERT_MESSAGE("No ScDrawLayer", pDrawLayer); const SdrPage* pPage = pDrawLayer->GetPage(0); CPPUNIT_ASSERT_MESSAGE("No draw page", pPage); CPPUNIT_ASSERT_EQUAL(size_t(2), pPage->GetObjCount()); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf125938_anchor_after_copy_paste) { // Load a document, which has an image in cell $sheet1.$B$3, anchored to cell. When the range // A3:C3 was copied and pasted to D9:D11 in sheet2, the image was displayed in cell D10, but // its anchor was in B3. createScDoc("ods/tdf125938_anchor_after_copy_paste.ods"); ScDocument* pDoc = getScDoc(); // Copy and paste goToCell("$Sheet1.$A$3:$C$3"); dispatchCommand(mxComponent, ".uno:Copy", {}); goToCell("$Sheet2.$D$9"); dispatchCommand(mxComponent, ".uno:Paste", {}); // Get pasted shape ScDrawLayer* pDrawLayer = pDoc->GetDrawLayer(); const SdrPage* pPage = pDrawLayer->GetPage(1); SdrObject* pObj = pPage->GetObj(0); // Make sure object is anchored to E9 ScDrawObjData* pObjData = ScDrawLayer::GetObjData(pObj); ScAddress aExpectedAddress(SCCOL(4), SCROW(8), SCTAB(1)); // zero based CPPUNIT_ASSERT_EQUAL(aExpectedAddress, (*pObjData).maStart); } CPPUNIT_TEST_FIXTURE(ScShapeTest, testTdf154821_shape_in_group) { // The document contains a shape in A7, a group spanning rows 2 to 4 and a second group spanning // rows 6 to 10. Error was, that when the document was saved with collapsed groups, the shape // lost its position. createScDoc("ods/tdf154821_shape_in_group.ods"); // Get snap rectangle before collapse and save ScDocument* pDoc = getScDoc(); SdrObject* pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); tools::Rectangle aRectOrig = pObj->GetSnapRect(); // Collapse the lower group ScTabViewShell* pViewShell = getViewShell(); pViewShell->GetViewData().SetCurX(0); pViewShell->GetViewData().SetCurY(5); pViewShell->GetViewData().GetDispatcher().Execute(SID_OUTLINE_HIDE); // Collapse the upper group pViewShell->GetViewData().SetCurX(0); pViewShell->GetViewData().SetCurY(1); pViewShell->GetViewData().GetDispatcher().Execute(SID_OUTLINE_HIDE); saveAndReload("calc8"); // Expand the lower group pViewShell = getViewShell(); pViewShell->GetViewData().SetCurX(0); pViewShell->GetViewData().SetCurY(5); pViewShell->GetViewData().GetDispatcher().Execute(SID_OUTLINE_SHOW); // Expand the upper group pViewShell = getViewShell(); pViewShell->GetViewData().SetCurX(0); pViewShell->GetViewData().SetCurY(1); pViewShell->GetViewData().GetDispatcher().Execute(SID_OUTLINE_SHOW); // Verify shape position is not changed besides rounding errors from twips<->mm pDoc = getScDoc(); pObj = lcl_getSdrObjectWithAssert(*pDoc, 0); tools::Rectangle aRectReload = pObj->GetSnapRect(); CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aRectOrig, aRectReload, 1); } CPPUNIT_PLUGIN_IMPLEMENT(); /* vim:set shiftwidth=4 softtabstop=4 expandtab: */