summaryrefslogtreecommitdiffstats
path: root/tests/modules/yang
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 04:20:26 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 04:20:26 +0000
commit044203039cebe3c05161f8f104a039d4744ca6d0 (patch)
tree1073c2308492e6aea4c66cb7436ee92db2abfd42 /tests/modules/yang
parentInitial commit. (diff)
downloadlibyang2-044203039cebe3c05161f8f104a039d4744ca6d0.tar.xz
libyang2-044203039cebe3c05161f8f104a039d4744ca6d0.zip
Adding upstream version 2.1.30.upstream/2.1.30
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'tests/modules/yang')
-rw-r--r--tests/modules/yang/iana-if-type@2014-05-08.yang1547
-rw-r--r--tests/modules/yang/ietf-interfaces@2014-05-08.yang725
-rw-r--r--tests/modules/yang/ietf-ip@2014-06-16.yang758
-rw-r--r--tests/modules/yang/ietf-netconf-acm@2018-02-14.yang464
-rw-r--r--tests/modules/yang/ietf-netconf-nmda@2019-01-07.yang385
-rw-r--r--tests/modules/yang/ietf-netconf-with-defaults@2011-06-01.yang140
-rw-r--r--tests/modules/yang/ietf-netconf@2011-06-01.yang934
-rw-r--r--tests/modules/yang/ietf-origin@2018-02-14.yang147
-rw-r--r--tests/modules/yang/ietf-restconf@2017-01-26.yang278
-rw-r--r--tests/modules/yang/notifications@2008-07-14.yang95
-rw-r--r--tests/modules/yang/sm-extension.yang17
-rw-r--r--tests/modules/yang/sm-mod.yang9
-rw-r--r--tests/modules/yang/sm-modp.yang24
-rw-r--r--tests/modules/yang/sm-rpcnotif.yang25
-rw-r--r--tests/modules/yang/sm.yang39
15 files changed, 5587 insertions, 0 deletions
diff --git a/tests/modules/yang/iana-if-type@2014-05-08.yang b/tests/modules/yang/iana-if-type@2014-05-08.yang
new file mode 100644
index 0000000..5dd8219
--- /dev/null
+++ b/tests/modules/yang/iana-if-type@2014-05-08.yang
@@ -0,0 +1,1547 @@
+module iana-if-type {
+ namespace "urn:ietf:params:xml:ns:yang:iana-if-type";
+ prefix ianaift;
+
+ import ietf-interfaces {
+ prefix if;
+ }
+
+ organization "IANA";
+ contact
+ " Internet Assigned Numbers Authority
+
+ Postal: ICANN
+ 4676 Admiralty Way, Suite 330
+ Marina del Rey, CA 90292
+
+ Tel: +1 310 823 9358
+ <mailto:iana@iana.org>";
+ description
+ "This YANG module defines YANG identities for IANA-registered
+ interface types.
+
+ This YANG module is maintained by IANA and reflects the
+ 'ifType definitions' registry.
+
+ The latest revision of this YANG module can be obtained from
+ the IANA web site.
+
+ Requests for new values should be made to IANA via
+ email (iana@iana.org).
+
+ Copyright (c) 2014 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject
+ to the license terms contained in, the Simplified BSD License
+ set forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (http://trustee.ietf.org/license-info).
+
+ The initial version of this YANG module is part of RFC 7224;
+ see the RFC itself for full legal notices.";
+ reference
+ "IANA 'ifType definitions' registry.
+ <http://www.iana.org/assignments/smi-numbers>";
+
+ revision 2014-05-08 {
+ description
+ "Initial revision.";
+ reference
+ "RFC 7224: IANA Interface Type YANG Module";
+ }
+
+ identity iana-interface-type {
+ base if:interface-type;
+ description
+ "This identity is used as a base for all interface types
+ defined in the 'ifType definitions' registry.";
+ }
+
+
+
+
+
+
+ identity other {
+ base iana-interface-type;
+ }
+ identity regular1822 {
+ base iana-interface-type;
+ }
+ identity hdh1822 {
+ base iana-interface-type;
+ }
+ identity ddnX25 {
+ base iana-interface-type;
+ }
+ identity rfc877x25 {
+ base iana-interface-type;
+ reference
+ "RFC 1382 - SNMP MIB Extension for the X.25 Packet Layer";
+ }
+ identity ethernetCsmacd {
+ base iana-interface-type;
+ description
+ "For all Ethernet-like interfaces, regardless of speed,
+ as per RFC 3635.";
+ reference
+ "RFC 3635 - Definitions of Managed Objects for the
+ Ethernet-like Interface Types";
+ }
+ identity iso88023Csmacd {
+ base iana-interface-type;
+ status deprecated;
+ description
+ "Deprecated via RFC 3635.
+ Use ethernetCsmacd(6) instead.";
+ reference
+ "RFC 3635 - Definitions of Managed Objects for the
+ Ethernet-like Interface Types";
+ }
+ identity iso88024TokenBus {
+ base iana-interface-type;
+ }
+ identity iso88025TokenRing {
+ base iana-interface-type;
+ }
+ identity iso88026Man {
+ base iana-interface-type;
+ }
+ identity starLan {
+ base iana-interface-type;
+ status deprecated;
+ description
+ "Deprecated via RFC 3635.
+ Use ethernetCsmacd(6) instead.";
+ reference
+ "RFC 3635 - Definitions of Managed Objects for the
+ Ethernet-like Interface Types";
+ }
+ identity proteon10Mbit {
+ base iana-interface-type;
+ }
+ identity proteon80Mbit {
+ base iana-interface-type;
+ }
+ identity hyperchannel {
+ base iana-interface-type;
+ }
+ identity fddi {
+ base iana-interface-type;
+ reference
+ "RFC 1512 - FDDI Management Information Base";
+ }
+ identity lapb {
+ base iana-interface-type;
+ reference
+ "RFC 1381 - SNMP MIB Extension for X.25 LAPB";
+ }
+ identity sdlc {
+ base iana-interface-type;
+ }
+ identity ds1 {
+ base iana-interface-type;
+ description
+ "DS1-MIB.";
+ reference
+ "RFC 4805 - Definitions of Managed Objects for the
+ DS1, J1, E1, DS2, and E2 Interface Types";
+ }
+ identity e1 {
+ base iana-interface-type;
+ status obsolete;
+ description
+ "Obsolete; see DS1-MIB.";
+ reference
+ "RFC 4805 - Definitions of Managed Objects for the
+ DS1, J1, E1, DS2, and E2 Interface Types";
+ }
+
+
+ identity basicISDN {
+ base iana-interface-type;
+ description
+ "No longer used. See also RFC 2127.";
+ }
+ identity primaryISDN {
+ base iana-interface-type;
+ description
+ "No longer used. See also RFC 2127.";
+ }
+ identity propPointToPointSerial {
+ base iana-interface-type;
+ description
+ "Proprietary serial.";
+ }
+ identity ppp {
+ base iana-interface-type;
+ }
+ identity softwareLoopback {
+ base iana-interface-type;
+ }
+ identity eon {
+ base iana-interface-type;
+ description
+ "CLNP over IP.";
+ }
+ identity ethernet3Mbit {
+ base iana-interface-type;
+ }
+ identity nsip {
+ base iana-interface-type;
+ description
+ "XNS over IP.";
+ }
+ identity slip {
+ base iana-interface-type;
+ description
+ "Generic SLIP.";
+ }
+ identity ultra {
+ base iana-interface-type;
+ description
+ "Ultra Technologies.";
+ }
+ identity ds3 {
+ base iana-interface-type;
+ description
+ "DS3-MIB.";
+ reference
+ "RFC 3896 - Definitions of Managed Objects for the
+ DS3/E3 Interface Type";
+ }
+ identity sip {
+ base iana-interface-type;
+ description
+ "SMDS, coffee.";
+ reference
+ "RFC 1694 - Definitions of Managed Objects for SMDS
+ Interfaces using SMIv2";
+ }
+ identity frameRelay {
+ base iana-interface-type;
+ description
+ "DTE only.";
+ reference
+ "RFC 2115 - Management Information Base for Frame Relay
+ DTEs Using SMIv2";
+ }
+ identity rs232 {
+ base iana-interface-type;
+ reference
+ "RFC 1659 - Definitions of Managed Objects for RS-232-like
+ Hardware Devices using SMIv2";
+ }
+ identity para {
+ base iana-interface-type;
+ description
+ "Parallel-port.";
+ reference
+ "RFC 1660 - Definitions of Managed Objects for
+ Parallel-printer-like Hardware Devices using
+ SMIv2";
+ }
+ identity arcnet {
+ base iana-interface-type;
+ description
+ "ARCnet.";
+ }
+ identity arcnetPlus {
+ base iana-interface-type;
+ description
+ "ARCnet Plus.";
+ }
+
+
+
+ identity atm {
+ base iana-interface-type;
+ description
+ "ATM cells.";
+ }
+ identity miox25 {
+ base iana-interface-type;
+ reference
+ "RFC 1461 - SNMP MIB extension for Multiprotocol
+ Interconnect over X.25";
+ }
+ identity sonet {
+ base iana-interface-type;
+ description
+ "SONET or SDH.";
+ }
+ identity x25ple {
+ base iana-interface-type;
+ reference
+ "RFC 2127 - ISDN Management Information Base using SMIv2";
+ }
+ identity iso88022llc {
+ base iana-interface-type;
+ }
+ identity localTalk {
+ base iana-interface-type;
+ }
+ identity smdsDxi {
+ base iana-interface-type;
+ }
+ identity frameRelayService {
+ base iana-interface-type;
+ description
+ "FRNETSERV-MIB.";
+ reference
+ "RFC 2954 - Definitions of Managed Objects for Frame
+ Relay Service";
+ }
+ identity v35 {
+ base iana-interface-type;
+ }
+ identity hssi {
+ base iana-interface-type;
+ }
+ identity hippi {
+ base iana-interface-type;
+ }
+
+ identity modem {
+ base iana-interface-type;
+ description
+ "Generic modem.";
+ }
+ identity aal5 {
+ base iana-interface-type;
+ description
+ "AAL5 over ATM.";
+ }
+ identity sonetPath {
+ base iana-interface-type;
+ }
+ identity sonetVT {
+ base iana-interface-type;
+ }
+ identity smdsIcip {
+ base iana-interface-type;
+ description
+ "SMDS InterCarrier Interface.";
+ }
+ identity propVirtual {
+ base iana-interface-type;
+ description
+ "Proprietary virtual/internal.";
+ reference
+ "RFC 2863 - The Interfaces Group MIB";
+ }
+ identity propMultiplexor {
+ base iana-interface-type;
+ description
+ "Proprietary multiplexing.";
+ reference
+ "RFC 2863 - The Interfaces Group MIB";
+ }
+ identity ieee80212 {
+ base iana-interface-type;
+ description
+ "100BaseVG.";
+ }
+ identity fibreChannel {
+ base iana-interface-type;
+ description
+ "Fibre Channel.";
+ }
+
+
+
+ identity hippiInterface {
+ base iana-interface-type;
+ description
+ "HIPPI interfaces.";
+ }
+ identity frameRelayInterconnect {
+ base iana-interface-type;
+ status obsolete;
+ description
+ "Obsolete; use either
+ frameRelay(32) or frameRelayService(44).";
+ }
+ identity aflane8023 {
+ base iana-interface-type;
+ description
+ "ATM Emulated LAN for 802.3.";
+ }
+ identity aflane8025 {
+ base iana-interface-type;
+ description
+ "ATM Emulated LAN for 802.5.";
+ }
+ identity cctEmul {
+ base iana-interface-type;
+ description
+ "ATM Emulated circuit.";
+ }
+ identity fastEther {
+ base iana-interface-type;
+ status deprecated;
+ description
+ "Obsoleted via RFC 3635.
+ ethernetCsmacd(6) should be used instead.";
+ reference
+ "RFC 3635 - Definitions of Managed Objects for the
+ Ethernet-like Interface Types";
+ }
+ identity isdn {
+ base iana-interface-type;
+ description
+ "ISDN and X.25.";
+ reference
+ "RFC 1356 - Multiprotocol Interconnect on X.25 and ISDN
+ in the Packet Mode";
+ }
+
+
+
+ identity v11 {
+ base iana-interface-type;
+ description
+ "CCITT V.11/X.21.";
+ }
+ identity v36 {
+ base iana-interface-type;
+ description
+ "CCITT V.36.";
+ }
+ identity g703at64k {
+ base iana-interface-type;
+ description
+ "CCITT G703 at 64Kbps.";
+ }
+ identity g703at2mb {
+ base iana-interface-type;
+ status obsolete;
+ description
+ "Obsolete; see DS1-MIB.";
+ }
+ identity qllc {
+ base iana-interface-type;
+ description
+ "SNA QLLC.";
+ }
+ identity fastEtherFX {
+ base iana-interface-type;
+ status deprecated;
+ description
+ "Obsoleted via RFC 3635.
+ ethernetCsmacd(6) should be used instead.";
+ reference
+ "RFC 3635 - Definitions of Managed Objects for the
+ Ethernet-like Interface Types";
+ }
+ identity channel {
+ base iana-interface-type;
+ description
+ "Channel.";
+ }
+ identity ieee80211 {
+ base iana-interface-type;
+ description
+ "Radio spread spectrum.";
+ }
+ identity ibm370parChan {
+ base iana-interface-type;
+ description
+ "IBM System 360/370 OEMI Channel.";
+ }
+ identity escon {
+ base iana-interface-type;
+ description
+ "IBM Enterprise Systems Connection.";
+ }
+ identity dlsw {
+ base iana-interface-type;
+ description
+ "Data Link Switching.";
+ }
+ identity isdns {
+ base iana-interface-type;
+ description
+ "ISDN S/T interface.";
+ }
+ identity isdnu {
+ base iana-interface-type;
+ description
+ "ISDN U interface.";
+ }
+ identity lapd {
+ base iana-interface-type;
+ description
+ "Link Access Protocol D.";
+ }
+ identity ipSwitch {
+ base iana-interface-type;
+ description
+ "IP Switching Objects.";
+ }
+ identity rsrb {
+ base iana-interface-type;
+ description
+ "Remote Source Route Bridging.";
+ }
+ identity atmLogical {
+ base iana-interface-type;
+ description
+ "ATM Logical Port.";
+ reference
+ "RFC 3606 - Definitions of Supplemental Managed Objects
+ for ATM Interface";
+ }
+ identity ds0 {
+ base iana-interface-type;
+ description
+ "Digital Signal Level 0.";
+ reference
+ "RFC 2494 - Definitions of Managed Objects for the DS0
+ and DS0 Bundle Interface Type";
+ }
+ identity ds0Bundle {
+ base iana-interface-type;
+ description
+ "Group of ds0s on the same ds1.";
+ reference
+ "RFC 2494 - Definitions of Managed Objects for the DS0
+ and DS0 Bundle Interface Type";
+ }
+ identity bsc {
+ base iana-interface-type;
+ description
+ "Bisynchronous Protocol.";
+ }
+ identity async {
+ base iana-interface-type;
+ description
+ "Asynchronous Protocol.";
+ }
+ identity cnr {
+ base iana-interface-type;
+ description
+ "Combat Net Radio.";
+ }
+ identity iso88025Dtr {
+ base iana-interface-type;
+ description
+ "ISO 802.5r DTR.";
+ }
+ identity eplrs {
+ base iana-interface-type;
+ description
+ "Ext Pos Loc Report Sys.";
+ }
+ identity arap {
+ base iana-interface-type;
+ description
+ "Appletalk Remote Access Protocol.";
+ }
+ identity propCnls {
+ base iana-interface-type;
+ description
+ "Proprietary Connectionless Protocol.";
+ }
+ identity hostPad {
+ base iana-interface-type;
+ description
+ "CCITT-ITU X.29 PAD Protocol.";
+ }
+ identity termPad {
+ base iana-interface-type;
+ description
+ "CCITT-ITU X.3 PAD Facility.";
+ }
+ identity frameRelayMPI {
+ base iana-interface-type;
+ description
+ "Multiproto Interconnect over FR.";
+ }
+ identity x213 {
+ base iana-interface-type;
+ description
+ "CCITT-ITU X213.";
+ }
+ identity adsl {
+ base iana-interface-type;
+ description
+ "Asymmetric Digital Subscriber Loop.";
+ }
+ identity radsl {
+ base iana-interface-type;
+ description
+ "Rate-Adapt. Digital Subscriber Loop.";
+ }
+ identity sdsl {
+ base iana-interface-type;
+ description
+ "Symmetric Digital Subscriber Loop.";
+ }
+ identity vdsl {
+ base iana-interface-type;
+ description
+ "Very H-Speed Digital Subscrib. Loop.";
+ }
+ identity iso88025CRFPInt {
+ base iana-interface-type;
+ description
+ "ISO 802.5 CRFP.";
+ }
+ identity myrinet {
+ base iana-interface-type;
+ description
+ "Myricom Myrinet.";
+ }
+ identity voiceEM {
+ base iana-interface-type;
+ description
+ "Voice recEive and transMit.";
+ }
+ identity voiceFXO {
+ base iana-interface-type;
+ description
+ "Voice Foreign Exchange Office.";
+ }
+ identity voiceFXS {
+ base iana-interface-type;
+ description
+ "Voice Foreign Exchange Station.";
+ }
+ identity voiceEncap {
+ base iana-interface-type;
+ description
+ "Voice encapsulation.";
+ }
+ identity voiceOverIp {
+ base iana-interface-type;
+ description
+ "Voice over IP encapsulation.";
+ }
+ identity atmDxi {
+ base iana-interface-type;
+ description
+ "ATM DXI.";
+ }
+ identity atmFuni {
+ base iana-interface-type;
+ description
+ "ATM FUNI.";
+ }
+ identity atmIma {
+ base iana-interface-type;
+ description
+ "ATM IMA.";
+ }
+ identity pppMultilinkBundle {
+ base iana-interface-type;
+ description
+ "PPP Multilink Bundle.";
+ }
+ identity ipOverCdlc {
+ base iana-interface-type;
+ description
+ "IBM ipOverCdlc.";
+ }
+ identity ipOverClaw {
+ base iana-interface-type;
+ description
+ "IBM Common Link Access to Workstn.";
+ }
+ identity stackToStack {
+ base iana-interface-type;
+ description
+ "IBM stackToStack.";
+ }
+ identity virtualIpAddress {
+ base iana-interface-type;
+ description
+ "IBM VIPA.";
+ }
+ identity mpc {
+ base iana-interface-type;
+ description
+ "IBM multi-protocol channel support.";
+ }
+ identity ipOverAtm {
+ base iana-interface-type;
+ description
+ "IBM ipOverAtm.";
+ reference
+ "RFC 2320 - Definitions of Managed Objects for Classical IP
+ and ARP Over ATM Using SMIv2 (IPOA-MIB)";
+ }
+ identity iso88025Fiber {
+ base iana-interface-type;
+ description
+ "ISO 802.5j Fiber Token Ring.";
+ }
+ identity tdlc {
+ base iana-interface-type;
+ description
+ "IBM twinaxial data link control.";
+ }
+ identity gigabitEthernet {
+ base iana-interface-type;
+ status deprecated;
+
+
+ description
+ "Obsoleted via RFC 3635.
+ ethernetCsmacd(6) should be used instead.";
+ reference
+ "RFC 3635 - Definitions of Managed Objects for the
+ Ethernet-like Interface Types";
+ }
+ identity hdlc {
+ base iana-interface-type;
+ description
+ "HDLC.";
+ }
+ identity lapf {
+ base iana-interface-type;
+ description
+ "LAP F.";
+ }
+ identity v37 {
+ base iana-interface-type;
+ description
+ "V.37.";
+ }
+ identity x25mlp {
+ base iana-interface-type;
+ description
+ "Multi-Link Protocol.";
+ }
+ identity x25huntGroup {
+ base iana-interface-type;
+ description
+ "X25 Hunt Group.";
+ }
+ identity transpHdlc {
+ base iana-interface-type;
+ description
+ "Transp HDLC.";
+ }
+ identity interleave {
+ base iana-interface-type;
+ description
+ "Interleave channel.";
+ }
+ identity fast {
+ base iana-interface-type;
+ description
+ "Fast channel.";
+ }
+
+ identity ip {
+ base iana-interface-type;
+ description
+ "IP (for APPN HPR in IP networks).";
+ }
+ identity docsCableMaclayer {
+ base iana-interface-type;
+ description
+ "CATV Mac Layer.";
+ }
+ identity docsCableDownstream {
+ base iana-interface-type;
+ description
+ "CATV Downstream interface.";
+ }
+ identity docsCableUpstream {
+ base iana-interface-type;
+ description
+ "CATV Upstream interface.";
+ }
+ identity a12MppSwitch {
+ base iana-interface-type;
+ description
+ "Avalon Parallel Processor.";
+ }
+ identity tunnel {
+ base iana-interface-type;
+ description
+ "Encapsulation interface.";
+ }
+ identity coffee {
+ base iana-interface-type;
+ description
+ "Coffee pot.";
+ reference
+ "RFC 2325 - Coffee MIB";
+ }
+ identity ces {
+ base iana-interface-type;
+ description
+ "Circuit Emulation Service.";
+ }
+ identity atmSubInterface {
+ base iana-interface-type;
+ description
+ "ATM Sub Interface.";
+ }
+
+ identity l2vlan {
+ base iana-interface-type;
+ description
+ "Layer 2 Virtual LAN using 802.1Q.";
+ }
+ identity l3ipvlan {
+ base iana-interface-type;
+ description
+ "Layer 3 Virtual LAN using IP.";
+ }
+ identity l3ipxvlan {
+ base iana-interface-type;
+ description
+ "Layer 3 Virtual LAN using IPX.";
+ }
+ identity digitalPowerline {
+ base iana-interface-type;
+ description
+ "IP over Power Lines.";
+ }
+ identity mediaMailOverIp {
+ base iana-interface-type;
+ description
+ "Multimedia Mail over IP.";
+ }
+ identity dtm {
+ base iana-interface-type;
+ description
+ "Dynamic synchronous Transfer Mode.";
+ }
+ identity dcn {
+ base iana-interface-type;
+ description
+ "Data Communications Network.";
+ }
+ identity ipForward {
+ base iana-interface-type;
+ description
+ "IP Forwarding Interface.";
+ }
+ identity msdsl {
+ base iana-interface-type;
+ description
+ "Multi-rate Symmetric DSL.";
+ }
+ identity ieee1394 {
+ base iana-interface-type;
+
+ description
+ "IEEE1394 High Performance Serial Bus.";
+ }
+ identity if-gsn {
+ base iana-interface-type;
+ description
+ "HIPPI-6400.";
+ }
+ identity dvbRccMacLayer {
+ base iana-interface-type;
+ description
+ "DVB-RCC MAC Layer.";
+ }
+ identity dvbRccDownstream {
+ base iana-interface-type;
+ description
+ "DVB-RCC Downstream Channel.";
+ }
+ identity dvbRccUpstream {
+ base iana-interface-type;
+ description
+ "DVB-RCC Upstream Channel.";
+ }
+ identity atmVirtual {
+ base iana-interface-type;
+ description
+ "ATM Virtual Interface.";
+ }
+ identity mplsTunnel {
+ base iana-interface-type;
+ description
+ "MPLS Tunnel Virtual Interface.";
+ }
+ identity srp {
+ base iana-interface-type;
+ description
+ "Spatial Reuse Protocol.";
+ }
+ identity voiceOverAtm {
+ base iana-interface-type;
+ description
+ "Voice over ATM.";
+ }
+ identity voiceOverFrameRelay {
+ base iana-interface-type;
+ description
+ "Voice Over Frame Relay.";
+ }
+ identity idsl {
+ base iana-interface-type;
+ description
+ "Digital Subscriber Loop over ISDN.";
+ }
+ identity compositeLink {
+ base iana-interface-type;
+ description
+ "Avici Composite Link Interface.";
+ }
+ identity ss7SigLink {
+ base iana-interface-type;
+ description
+ "SS7 Signaling Link.";
+ }
+ identity propWirelessP2P {
+ base iana-interface-type;
+ description
+ "Prop. P2P wireless interface.";
+ }
+ identity frForward {
+ base iana-interface-type;
+ description
+ "Frame Forward Interface.";
+ }
+ identity rfc1483 {
+ base iana-interface-type;
+ description
+ "Multiprotocol over ATM AAL5.";
+ reference
+ "RFC 1483 - Multiprotocol Encapsulation over ATM
+ Adaptation Layer 5";
+ }
+ identity usb {
+ base iana-interface-type;
+ description
+ "USB Interface.";
+ }
+ identity ieee8023adLag {
+ base iana-interface-type;
+ description
+ "IEEE 802.3ad Link Aggregate.";
+ }
+ identity bgppolicyaccounting {
+ base iana-interface-type;
+ description
+ "BGP Policy Accounting.";
+ }
+ identity frf16MfrBundle {
+ base iana-interface-type;
+ description
+ "FRF.16 Multilink Frame Relay.";
+ }
+ identity h323Gatekeeper {
+ base iana-interface-type;
+ description
+ "H323 Gatekeeper.";
+ }
+ identity h323Proxy {
+ base iana-interface-type;
+ description
+ "H323 Voice and Video Proxy.";
+ }
+ identity mpls {
+ base iana-interface-type;
+ description
+ "MPLS.";
+ }
+ identity mfSigLink {
+ base iana-interface-type;
+ description
+ "Multi-frequency signaling link.";
+ }
+ identity hdsl2 {
+ base iana-interface-type;
+ description
+ "High Bit-Rate DSL - 2nd generation.";
+ }
+ identity shdsl {
+ base iana-interface-type;
+ description
+ "Multirate HDSL2.";
+ }
+ identity ds1FDL {
+ base iana-interface-type;
+ description
+ "Facility Data Link (4Kbps) on a DS1.";
+ }
+ identity pos {
+ base iana-interface-type;
+ description
+ "Packet over SONET/SDH Interface.";
+ }
+
+
+
+ identity dvbAsiIn {
+ base iana-interface-type;
+ description
+ "DVB-ASI Input.";
+ }
+ identity dvbAsiOut {
+ base iana-interface-type;
+ description
+ "DVB-ASI Output.";
+ }
+ identity plc {
+ base iana-interface-type;
+ description
+ "Power Line Communications.";
+ }
+ identity nfas {
+ base iana-interface-type;
+ description
+ "Non-Facility Associated Signaling.";
+ }
+ identity tr008 {
+ base iana-interface-type;
+ description
+ "TR008.";
+ }
+ identity gr303RDT {
+ base iana-interface-type;
+ description
+ "Remote Digital Terminal.";
+ }
+ identity gr303IDT {
+ base iana-interface-type;
+ description
+ "Integrated Digital Terminal.";
+ }
+ identity isup {
+ base iana-interface-type;
+ description
+ "ISUP.";
+ }
+ identity propDocsWirelessMaclayer {
+ base iana-interface-type;
+ description
+ "Cisco proprietary Maclayer.";
+ }
+
+
+
+ identity propDocsWirelessDownstream {
+ base iana-interface-type;
+ description
+ "Cisco proprietary Downstream.";
+ }
+ identity propDocsWirelessUpstream {
+ base iana-interface-type;
+ description
+ "Cisco proprietary Upstream.";
+ }
+ identity hiperlan2 {
+ base iana-interface-type;
+ description
+ "HIPERLAN Type 2 Radio Interface.";
+ }
+ identity propBWAp2Mp {
+ base iana-interface-type;
+ description
+ "PropBroadbandWirelessAccesspt2Multipt (use of this value
+ for IEEE 802.16 WMAN interfaces as per IEEE Std 802.16f
+ is deprecated, and ieee80216WMAN(237) should be used
+ instead).";
+ }
+ identity sonetOverheadChannel {
+ base iana-interface-type;
+ description
+ "SONET Overhead Channel.";
+ }
+ identity digitalWrapperOverheadChannel {
+ base iana-interface-type;
+ description
+ "Digital Wrapper.";
+ }
+ identity aal2 {
+ base iana-interface-type;
+ description
+ "ATM adaptation layer 2.";
+ }
+ identity radioMAC {
+ base iana-interface-type;
+ description
+ "MAC layer over radio links.";
+ }
+ identity atmRadio {
+ base iana-interface-type;
+ description
+ "ATM over radio links.";
+ }
+ identity imt {
+ base iana-interface-type;
+ description
+ "Inter-Machine Trunks.";
+ }
+ identity mvl {
+ base iana-interface-type;
+ description
+ "Multiple Virtual Lines DSL.";
+ }
+ identity reachDSL {
+ base iana-interface-type;
+ description
+ "Long Reach DSL.";
+ }
+ identity frDlciEndPt {
+ base iana-interface-type;
+ description
+ "Frame Relay DLCI End Point.";
+ }
+ identity atmVciEndPt {
+ base iana-interface-type;
+ description
+ "ATM VCI End Point.";
+ }
+ identity opticalChannel {
+ base iana-interface-type;
+ description
+ "Optical Channel.";
+ }
+ identity opticalTransport {
+ base iana-interface-type;
+ description
+ "Optical Transport.";
+ }
+ identity propAtm {
+ base iana-interface-type;
+ description
+ "Proprietary ATM.";
+ }
+ identity voiceOverCable {
+ base iana-interface-type;
+ description
+ "Voice Over Cable Interface.";
+ }
+
+
+
+ identity infiniband {
+ base iana-interface-type;
+ description
+ "Infiniband.";
+ }
+ identity teLink {
+ base iana-interface-type;
+ description
+ "TE Link.";
+ }
+ identity q2931 {
+ base iana-interface-type;
+ description
+ "Q.2931.";
+ }
+ identity virtualTg {
+ base iana-interface-type;
+ description
+ "Virtual Trunk Group.";
+ }
+ identity sipTg {
+ base iana-interface-type;
+ description
+ "SIP Trunk Group.";
+ }
+ identity sipSig {
+ base iana-interface-type;
+ description
+ "SIP Signaling.";
+ }
+ identity docsCableUpstreamChannel {
+ base iana-interface-type;
+ description
+ "CATV Upstream Channel.";
+ }
+ identity econet {
+ base iana-interface-type;
+ description
+ "Acorn Econet.";
+ }
+ identity pon155 {
+ base iana-interface-type;
+ description
+ "FSAN 155Mb Symetrical PON interface.";
+ }
+
+
+
+ identity pon622 {
+ base iana-interface-type;
+ description
+ "FSAN 622Mb Symetrical PON interface.";
+ }
+ identity bridge {
+ base iana-interface-type;
+ description
+ "Transparent bridge interface.";
+ }
+ identity linegroup {
+ base iana-interface-type;
+ description
+ "Interface common to multiple lines.";
+ }
+ identity voiceEMFGD {
+ base iana-interface-type;
+ description
+ "Voice E&M Feature Group D.";
+ }
+ identity voiceFGDEANA {
+ base iana-interface-type;
+ description
+ "Voice FGD Exchange Access North American.";
+ }
+ identity voiceDID {
+ base iana-interface-type;
+ description
+ "Voice Direct Inward Dialing.";
+ }
+ identity mpegTransport {
+ base iana-interface-type;
+ description
+ "MPEG transport interface.";
+ }
+ identity sixToFour {
+ base iana-interface-type;
+ status deprecated;
+ description
+ "6to4 interface (DEPRECATED).";
+ reference
+ "RFC 4087 - IP Tunnel MIB";
+ }
+ identity gtp {
+ base iana-interface-type;
+ description
+ "GTP (GPRS Tunneling Protocol).";
+ }
+ identity pdnEtherLoop1 {
+ base iana-interface-type;
+ description
+ "Paradyne EtherLoop 1.";
+ }
+ identity pdnEtherLoop2 {
+ base iana-interface-type;
+ description
+ "Paradyne EtherLoop 2.";
+ }
+ identity opticalChannelGroup {
+ base iana-interface-type;
+ description
+ "Optical Channel Group.";
+ }
+ identity homepna {
+ base iana-interface-type;
+ description
+ "HomePNA ITU-T G.989.";
+ }
+ identity gfp {
+ base iana-interface-type;
+ description
+ "Generic Framing Procedure (GFP).";
+ }
+ identity ciscoISLvlan {
+ base iana-interface-type;
+ description
+ "Layer 2 Virtual LAN using Cisco ISL.";
+ }
+ identity actelisMetaLOOP {
+ base iana-interface-type;
+ description
+ "Acteleis proprietary MetaLOOP High Speed Link.";
+ }
+ identity fcipLink {
+ base iana-interface-type;
+ description
+ "FCIP Link.";
+ }
+ identity rpr {
+ base iana-interface-type;
+ description
+ "Resilient Packet Ring Interface Type.";
+ }
+
+
+
+ identity qam {
+ base iana-interface-type;
+ description
+ "RF Qam Interface.";
+ }
+ identity lmp {
+ base iana-interface-type;
+ description
+ "Link Management Protocol.";
+ reference
+ "RFC 4327 - Link Management Protocol (LMP) Management
+ Information Base (MIB)";
+ }
+ identity cblVectaStar {
+ base iana-interface-type;
+ description
+ "Cambridge Broadband Networks Limited VectaStar.";
+ }
+ identity docsCableMCmtsDownstream {
+ base iana-interface-type;
+ description
+ "CATV Modular CMTS Downstream Interface.";
+ }
+ identity adsl2 {
+ base iana-interface-type;
+ status deprecated;
+ description
+ "Asymmetric Digital Subscriber Loop Version 2
+ (DEPRECATED/OBSOLETED - please use adsl2plus(238)
+ instead).";
+ reference
+ "RFC 4706 - Definitions of Managed Objects for Asymmetric
+ Digital Subscriber Line 2 (ADSL2)";
+ }
+ identity macSecControlledIF {
+ base iana-interface-type;
+ description
+ "MACSecControlled.";
+ }
+ identity macSecUncontrolledIF {
+ base iana-interface-type;
+ description
+ "MACSecUncontrolled.";
+ }
+ identity aviciOpticalEther {
+ base iana-interface-type;
+ description
+ "Avici Optical Ethernet Aggregate.";
+ }
+ identity atmbond {
+ base iana-interface-type;
+ description
+ "atmbond.";
+ }
+ identity voiceFGDOS {
+ base iana-interface-type;
+ description
+ "Voice FGD Operator Services.";
+ }
+ identity mocaVersion1 {
+ base iana-interface-type;
+ description
+ "MultiMedia over Coax Alliance (MoCA) Interface
+ as documented in information provided privately to IANA.";
+ }
+ identity ieee80216WMAN {
+ base iana-interface-type;
+ description
+ "IEEE 802.16 WMAN interface.";
+ }
+ identity adsl2plus {
+ base iana-interface-type;
+ description
+ "Asymmetric Digital Subscriber Loop Version 2 -
+ Version 2 Plus and all variants.";
+ }
+ identity dvbRcsMacLayer {
+ base iana-interface-type;
+ description
+ "DVB-RCS MAC Layer.";
+ reference
+ "RFC 5728 - The SatLabs Group DVB-RCS MIB";
+ }
+ identity dvbTdm {
+ base iana-interface-type;
+ description
+ "DVB Satellite TDM.";
+ reference
+ "RFC 5728 - The SatLabs Group DVB-RCS MIB";
+ }
+ identity dvbRcsTdma {
+ base iana-interface-type;
+ description
+ "DVB-RCS TDMA.";
+ reference
+ "RFC 5728 - The SatLabs Group DVB-RCS MIB";
+ }
+ identity x86Laps {
+ base iana-interface-type;
+ description
+ "LAPS based on ITU-T X.86/Y.1323.";
+ }
+ identity wwanPP {
+ base iana-interface-type;
+ description
+ "3GPP WWAN.";
+ }
+ identity wwanPP2 {
+ base iana-interface-type;
+ description
+ "3GPP2 WWAN.";
+ }
+ identity voiceEBS {
+ base iana-interface-type;
+ description
+ "Voice P-phone EBS physical interface.";
+ }
+ identity ifPwType {
+ base iana-interface-type;
+ description
+ "Pseudowire interface type.";
+ reference
+ "RFC 5601 - Pseudowire (PW) Management Information Base (MIB)";
+ }
+ identity ilan {
+ base iana-interface-type;
+ description
+ "Internal LAN on a bridge per IEEE 802.1ap.";
+ }
+ identity pip {
+ base iana-interface-type;
+ description
+ "Provider Instance Port on a bridge per IEEE 802.1ah PBB.";
+ }
+ identity aluELP {
+ base iana-interface-type;
+ description
+ "Alcatel-Lucent Ethernet Link Protection.";
+ }
+ identity gpon {
+ base iana-interface-type;
+ description
+ "Gigabit-capable passive optical networks (G-PON) as per
+ ITU-T G.948.";
+ }
+ identity vdsl2 {
+ base iana-interface-type;
+ description
+ "Very high speed digital subscriber line Version 2
+ (as per ITU-T Recommendation G.993.2).";
+ reference
+ "RFC 5650 - Definitions of Managed Objects for Very High
+ Speed Digital Subscriber Line 2 (VDSL2)";
+ }
+ identity capwapDot11Profile {
+ base iana-interface-type;
+ description
+ "WLAN Profile Interface.";
+ reference
+ "RFC 5834 - Control and Provisioning of Wireless Access
+ Points (CAPWAP) Protocol Binding MIB for
+ IEEE 802.11";
+ }
+ identity capwapDot11Bss {
+ base iana-interface-type;
+ description
+ "WLAN BSS Interface.";
+ reference
+ "RFC 5834 - Control and Provisioning of Wireless Access
+ Points (CAPWAP) Protocol Binding MIB for
+ IEEE 802.11";
+ }
+ identity capwapWtpVirtualRadio {
+ base iana-interface-type;
+ description
+ "WTP Virtual Radio Interface.";
+ reference
+ "RFC 5833 - Control and Provisioning of Wireless Access
+ Points (CAPWAP) Protocol Base MIB";
+ }
+ identity bits {
+ base iana-interface-type;
+ description
+ "bitsport.";
+ }
+ identity docsCableUpstreamRfPort {
+ base iana-interface-type;
+ description
+ "DOCSIS CATV Upstream RF Port.";
+ }
+
+
+ identity cableDownstreamRfPort {
+ base iana-interface-type;
+ description
+ "CATV downstream RF Port.";
+ }
+ identity vmwareVirtualNic {
+ base iana-interface-type;
+ description
+ "VMware Virtual Network Interface.";
+ }
+ identity ieee802154 {
+ base iana-interface-type;
+ description
+ "IEEE 802.15.4 WPAN interface.";
+ reference
+ "IEEE 802.15.4-2006";
+ }
+ identity otnOdu {
+ base iana-interface-type;
+ description
+ "OTN Optical Data Unit.";
+ }
+ identity otnOtu {
+ base iana-interface-type;
+ description
+ "OTN Optical channel Transport Unit.";
+ }
+ identity ifVfiType {
+ base iana-interface-type;
+ description
+ "VPLS Forwarding Instance Interface Type.";
+ }
+ identity g9981 {
+ base iana-interface-type;
+ description
+ "G.998.1 bonded interface.";
+ }
+ identity g9982 {
+ base iana-interface-type;
+ description
+ "G.998.2 bonded interface.";
+ }
+ identity g9983 {
+ base iana-interface-type;
+ description
+ "G.998.3 bonded interface.";
+ }
+
+ identity aluEpon {
+ base iana-interface-type;
+ description
+ "Ethernet Passive Optical Networks (E-PON).";
+ }
+ identity aluEponOnu {
+ base iana-interface-type;
+ description
+ "EPON Optical Network Unit.";
+ }
+ identity aluEponPhysicalUni {
+ base iana-interface-type;
+ description
+ "EPON physical User to Network interface.";
+ }
+ identity aluEponLogicalLink {
+ base iana-interface-type;
+ description
+ "The emulation of a point-to-point link over the EPON
+ layer.";
+ }
+ identity aluGponOnu {
+ base iana-interface-type;
+ description
+ "GPON Optical Network Unit.";
+ reference
+ "ITU-T G.984.2";
+ }
+ identity aluGponPhysicalUni {
+ base iana-interface-type;
+ description
+ "GPON physical User to Network interface.";
+ reference
+ "ITU-T G.984.2";
+ }
+ identity vmwareNicTeam {
+ base iana-interface-type;
+ description
+ "VMware NIC Team.";
+ }
+}
diff --git a/tests/modules/yang/ietf-interfaces@2014-05-08.yang b/tests/modules/yang/ietf-interfaces@2014-05-08.yang
new file mode 100644
index 0000000..ad64425
--- /dev/null
+++ b/tests/modules/yang/ietf-interfaces@2014-05-08.yang
@@ -0,0 +1,725 @@
+module ietf-interfaces {
+
+ namespace "urn:ietf:params:xml:ns:yang:ietf-interfaces";
+ prefix if;
+
+ import ietf-yang-types {
+ prefix yang;
+ }
+
+ organization
+ "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+ contact
+ "WG Web: <http://tools.ietf.org/wg/netmod/>
+ WG List: <mailto:netmod@ietf.org>
+
+ WG Chair: Thomas Nadeau
+ <mailto:tnadeau@lucidvision.com>
+
+ WG Chair: Juergen Schoenwaelder
+ <mailto:j.schoenwaelder@jacobs-university.de>
+
+ Editor: Martin Bjorklund
+ <mailto:mbj@tail-f.com>";
+
+ description
+ "This module contains a collection of YANG definitions for
+ managing network interfaces.
+
+ Copyright (c) 2014 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject
+ to the license terms contained in, the Simplified BSD License
+ set forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (http://trustee.ietf.org/license-info).
+
+ This version of this YANG module is part of RFC 7223; see
+ the RFC itself for full legal notices.";
+
+ revision 2014-05-08 {
+ description
+ "Initial revision.";
+ reference
+ "RFC 7223: A YANG Data Model for Interface Management";
+ }
+
+ /*
+ * Typedefs
+ */
+
+ typedef interface-ref {
+ type leafref {
+ path "/if:interfaces/if:interface/if:name";
+ }
+ description
+ "This type is used by data models that need to reference
+ configured interfaces.";
+ }
+
+ typedef interface-state-ref {
+ type leafref {
+ path "/if:interfaces-state/if:interface/if:name";
+ }
+ description
+ "This type is used by data models that need to reference
+ the operationally present interfaces.";
+ }
+
+ /*
+ * Identities
+ */
+
+ identity interface-type {
+ description
+ "Base identity from which specific interface types are
+ derived.";
+ }
+
+ /*
+ * Features
+ */
+
+ feature arbitrary-names {
+ description
+ "This feature indicates that the device allows user-controlled
+ interfaces to be named arbitrarily.";
+ }
+ feature pre-provisioning {
+ description
+ "This feature indicates that the device supports
+ pre-provisioning of interface configuration, i.e., it is
+ possible to configure an interface whose physical interface
+ hardware is not present on the device.";
+ }
+
+ feature if-mib {
+ description
+ "This feature indicates that the device implements
+ the IF-MIB.";
+ reference
+ "RFC 2863: The Interfaces Group MIB";
+ }
+
+ /*
+ * Configuration data nodes
+ */
+
+ container interfaces {
+ description
+ "Interface configuration parameters.";
+
+ list interface {
+ key "name";
+
+ description
+ "The list of configured interfaces on the device.
+
+ The operational state of an interface is available in the
+ /interfaces-state/interface list. If the configuration of a
+ system-controlled interface cannot be used by the system
+ (e.g., the interface hardware present does not match the
+ interface type), then the configuration is not applied to
+ the system-controlled interface shown in the
+ /interfaces-state/interface list. If the configuration
+ of a user-controlled interface cannot be used by the system,
+ the configured interface is not instantiated in the
+ /interfaces-state/interface list.";
+
+ leaf name {
+ type string;
+ description
+ "The name of the interface.
+
+ A device MAY restrict the allowed values for this leaf,
+ possibly depending on the type of the interface.
+ For system-controlled interfaces, this leaf is the
+ device-specific name of the interface. The 'config false'
+ list /interfaces-state/interface contains the currently
+ existing interfaces on the device.
+
+ If a client tries to create configuration for a
+ system-controlled interface that is not present in the
+ /interfaces-state/interface list, the server MAY reject
+ the request if the implementation does not support
+ pre-provisioning of interfaces or if the name refers to
+ an interface that can never exist in the system. A
+ NETCONF server MUST reply with an rpc-error with the
+ error-tag 'invalid-value' in this case.
+
+ If the device supports pre-provisioning of interface
+ configuration, the 'pre-provisioning' feature is
+ advertised.
+
+ If the device allows arbitrarily named user-controlled
+ interfaces, the 'arbitrary-names' feature is advertised.
+
+ When a configured user-controlled interface is created by
+ the system, it is instantiated with the same name in the
+ /interface-state/interface list.";
+ }
+
+ leaf description {
+ type string;
+ description
+ "A textual description of the interface.
+
+ A server implementation MAY map this leaf to the ifAlias
+ MIB object. Such an implementation needs to use some
+ mechanism to handle the differences in size and characters
+ allowed between this leaf and ifAlias. The definition of
+ such a mechanism is outside the scope of this document.
+
+ Since ifAlias is defined to be stored in non-volatile
+ storage, the MIB implementation MUST map ifAlias to the
+ value of 'description' in the persistently stored
+ datastore.
+
+ Specifically, if the device supports ':startup', when
+ ifAlias is read the device MUST return the value of
+ 'description' in the 'startup' datastore, and when it is
+ written, it MUST be written to the 'running' and 'startup'
+ datastores. Note that it is up to the implementation to
+
+ decide whether to modify this single leaf in 'startup' or
+ perform an implicit copy-config from 'running' to
+ 'startup'.
+
+ If the device does not support ':startup', ifAlias MUST
+ be mapped to the 'description' leaf in the 'running'
+ datastore.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifAlias";
+ }
+
+ leaf type {
+ type identityref {
+ base interface-type;
+ }
+ mandatory true;
+ description
+ "The type of the interface.
+
+ When an interface entry is created, a server MAY
+ initialize the type leaf with a valid value, e.g., if it
+ is possible to derive the type from the name of the
+ interface.
+
+ If a client tries to set the type of an interface to a
+ value that can never be used by the system, e.g., if the
+ type is not supported or if the type does not match the
+ name of the interface, the server MUST reject the request.
+ A NETCONF server MUST reply with an rpc-error with the
+ error-tag 'invalid-value' in this case.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifType";
+ }
+
+ leaf enabled {
+ type boolean;
+ default "true";
+ description
+ "This leaf contains the configured, desired state of the
+ interface.
+
+ Systems that implement the IF-MIB use the value of this
+ leaf in the 'running' datastore to set
+ IF-MIB.ifAdminStatus to 'up' or 'down' after an ifEntry
+ has been initialized, as described in RFC 2863.
+
+
+
+ Changes in this leaf in the 'running' datastore are
+ reflected in ifAdminStatus, but if ifAdminStatus is
+ changed over SNMP, this leaf is not affected.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifAdminStatus";
+ }
+
+ leaf link-up-down-trap-enable {
+ if-feature if-mib;
+ type enumeration {
+ enum enabled {
+ value 1;
+ }
+ enum disabled {
+ value 2;
+ }
+ }
+ description
+ "Controls whether linkUp/linkDown SNMP notifications
+ should be generated for this interface.
+
+ If this node is not configured, the value 'enabled' is
+ operationally used by the server for interfaces that do
+ not operate on top of any other interface (i.e., there are
+ no 'lower-layer-if' entries), and 'disabled' otherwise.";
+ reference
+ "RFC 2863: The Interfaces Group MIB -
+ ifLinkUpDownTrapEnable";
+ }
+ }
+ }
+
+ /*
+ * Operational state data nodes
+ */
+
+ container interfaces-state {
+ config false;
+ description
+ "Data nodes for the operational state of interfaces.";
+
+ list interface {
+ key "name";
+
+
+
+
+
+ description
+ "The list of interfaces on the device.
+
+ System-controlled interfaces created by the system are
+ always present in this list, whether they are configured or
+ not.";
+
+ leaf name {
+ type string;
+ description
+ "The name of the interface.
+
+ A server implementation MAY map this leaf to the ifName
+ MIB object. Such an implementation needs to use some
+ mechanism to handle the differences in size and characters
+ allowed between this leaf and ifName. The definition of
+ such a mechanism is outside the scope of this document.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifName";
+ }
+
+ leaf type {
+ type identityref {
+ base interface-type;
+ }
+ mandatory true;
+ description
+ "The type of the interface.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifType";
+ }
+
+ leaf admin-status {
+ if-feature if-mib;
+ type enumeration {
+ enum up {
+ value 1;
+ description
+ "Ready to pass packets.";
+ }
+ enum down {
+ value 2;
+ description
+ "Not ready to pass packets and not in some test mode.";
+ }
+
+
+
+ enum testing {
+ value 3;
+ description
+ "In some test mode.";
+ }
+ }
+ mandatory true;
+ description
+ "The desired state of the interface.
+
+ This leaf has the same read semantics as ifAdminStatus.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifAdminStatus";
+ }
+
+ leaf oper-status {
+ type enumeration {
+ enum up {
+ value 1;
+ description
+ "Ready to pass packets.";
+ }
+ enum down {
+ value 2;
+ description
+ "The interface does not pass any packets.";
+ }
+ enum testing {
+ value 3;
+ description
+ "In some test mode. No operational packets can
+ be passed.";
+ }
+ enum unknown {
+ value 4;
+ description
+ "Status cannot be determined for some reason.";
+ }
+ enum dormant {
+ value 5;
+ description
+ "Waiting for some external event.";
+ }
+ enum not-present {
+ value 6;
+ description
+ "Some component (typically hardware) is missing.";
+ }
+ enum lower-layer-down {
+ value 7;
+ description
+ "Down due to state of lower-layer interface(s).";
+ }
+ }
+ mandatory true;
+ description
+ "The current operational state of the interface.
+
+ This leaf has the same semantics as ifOperStatus.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifOperStatus";
+ }
+
+ leaf last-change {
+ type yang:date-and-time;
+ description
+ "The time the interface entered its current operational
+ state. If the current state was entered prior to the
+ last re-initialization of the local network management
+ subsystem, then this node is not present.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifLastChange";
+ }
+
+ leaf if-index {
+ if-feature if-mib;
+ type int32 {
+ range "1..2147483647";
+ }
+ mandatory true;
+ description
+ "The ifIndex value for the ifEntry represented by this
+ interface.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifIndex";
+ }
+
+ leaf phys-address {
+ type yang:phys-address;
+ description
+ "The interface's address at its protocol sub-layer. For
+ example, for an 802.x interface, this object normally
+ contains a Media Access Control (MAC) address. The
+ interface's media-specific modules must define the bit
+
+
+ and byte ordering and the format of the value of this
+ object. For interfaces that do not have such an address
+ (e.g., a serial line), this node is not present.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifPhysAddress";
+ }
+
+ leaf-list higher-layer-if {
+ type interface-state-ref;
+ description
+ "A list of references to interfaces layered on top of this
+ interface.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifStackTable";
+ }
+
+ leaf-list lower-layer-if {
+ type interface-state-ref;
+ description
+ "A list of references to interfaces layered underneath this
+ interface.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifStackTable";
+ }
+
+ leaf speed {
+ type yang:gauge64;
+ units "bits/second";
+ description
+ "An estimate of the interface's current bandwidth in bits
+ per second. For interfaces that do not vary in
+ bandwidth or for those where no accurate estimation can
+ be made, this node should contain the nominal bandwidth.
+ For interfaces that have no concept of bandwidth, this
+ node is not present.";
+ reference
+ "RFC 2863: The Interfaces Group MIB -
+ ifSpeed, ifHighSpeed";
+ }
+
+
+
+
+
+
+
+
+
+ container statistics {
+ description
+ "A collection of interface-related statistics objects.";
+
+ leaf discontinuity-time {
+ type yang:date-and-time;
+ mandatory true;
+ description
+ "The time on the most recent occasion at which any one or
+ more of this interface's counters suffered a
+ discontinuity. If no such discontinuities have occurred
+ since the last re-initialization of the local management
+ subsystem, then this node contains the time the local
+ management subsystem re-initialized itself.";
+ }
+
+ leaf in-octets {
+ type yang:counter64;
+ description
+ "The total number of octets received on the interface,
+ including framing characters.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifHCInOctets";
+ }
+
+ leaf in-unicast-pkts {
+ type yang:counter64;
+ description
+ "The number of packets, delivered by this sub-layer to a
+ higher (sub-)layer, that were not addressed to a
+ multicast or broadcast address at this sub-layer.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifHCInUcastPkts";
+ }
+
+
+
+
+ leaf in-broadcast-pkts {
+ type yang:counter64;
+ description
+ "The number of packets, delivered by this sub-layer to a
+ higher (sub-)layer, that were addressed to a broadcast
+ address at this sub-layer.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB -
+ ifHCInBroadcastPkts";
+ }
+
+ leaf in-multicast-pkts {
+ type yang:counter64;
+ description
+ "The number of packets, delivered by this sub-layer to a
+ higher (sub-)layer, that were addressed to a multicast
+ address at this sub-layer. For a MAC-layer protocol,
+ this includes both Group and Functional addresses.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB -
+ ifHCInMulticastPkts";
+ }
+
+ leaf in-discards {
+ type yang:counter32;
+ description
+ "The number of inbound packets that were chosen to be
+ discarded even though no errors had been detected to
+ prevent their being deliverable to a higher-layer
+ protocol. One possible reason for discarding such a
+ packet could be to free up buffer space.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+
+
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifInDiscards";
+ }
+
+ leaf in-errors {
+ type yang:counter32;
+ description
+ "For packet-oriented interfaces, the number of inbound
+ packets that contained errors preventing them from being
+ deliverable to a higher-layer protocol. For character-
+ oriented or fixed-length interfaces, the number of
+ inbound transmission units that contained errors
+ preventing them from being deliverable to a higher-layer
+ protocol.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifInErrors";
+ }
+
+ leaf in-unknown-protos {
+ type yang:counter32;
+ description
+ "For packet-oriented interfaces, the number of packets
+ received via the interface that were discarded because
+ of an unknown or unsupported protocol. For
+ character-oriented or fixed-length interfaces that
+ support protocol multiplexing, the number of
+ transmission units received via the interface that were
+ discarded because of an unknown or unsupported protocol.
+ For any interface that does not support protocol
+ multiplexing, this counter is not present.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos";
+ }
+
+
+
+
+
+ leaf out-octets {
+ type yang:counter64;
+ description
+ "The total number of octets transmitted out of the
+ interface, including framing characters.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifHCOutOctets";
+ }
+
+ leaf out-unicast-pkts {
+ type yang:counter64;
+ description
+ "The total number of packets that higher-level protocols
+ requested be transmitted, and that were not addressed
+ to a multicast or broadcast address at this sub-layer,
+ including those that were discarded or not sent.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifHCOutUcastPkts";
+ }
+
+ leaf out-broadcast-pkts {
+ type yang:counter64;
+ description
+ "The total number of packets that higher-level protocols
+ requested be transmitted, and that were addressed to a
+ broadcast address at this sub-layer, including those
+ that were discarded or not sent.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB -
+ ifHCOutBroadcastPkts";
+ }
+
+
+ leaf out-multicast-pkts {
+ type yang:counter64;
+ description
+ "The total number of packets that higher-level protocols
+ requested be transmitted, and that were addressed to a
+ multicast address at this sub-layer, including those
+ that were discarded or not sent. For a MAC-layer
+ protocol, this includes both Group and Functional
+ addresses.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB -
+ ifHCOutMulticastPkts";
+ }
+
+ leaf out-discards {
+ type yang:counter32;
+ description
+ "The number of outbound packets that were chosen to be
+ discarded even though no errors had been detected to
+ prevent their being transmitted. One possible reason
+ for discarding such a packet could be to free up buffer
+ space.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifOutDiscards";
+ }
+
+ leaf out-errors {
+ type yang:counter32;
+ description
+ "For packet-oriented interfaces, the number of outbound
+ packets that could not be transmitted because of errors.
+ For character-oriented or fixed-length interfaces, the
+ number of outbound transmission units that could not be
+ transmitted because of errors.
+
+
+
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at
+ other times as indicated by the value of
+ 'discontinuity-time'.";
+ reference
+ "RFC 2863: The Interfaces Group MIB - ifOutErrors";
+ }
+ }
+ }
+ }
+}
diff --git a/tests/modules/yang/ietf-ip@2014-06-16.yang b/tests/modules/yang/ietf-ip@2014-06-16.yang
new file mode 100644
index 0000000..1499120
--- /dev/null
+++ b/tests/modules/yang/ietf-ip@2014-06-16.yang
@@ -0,0 +1,758 @@
+module ietf-ip {
+
+ namespace "urn:ietf:params:xml:ns:yang:ietf-ip";
+ prefix ip;
+
+ import ietf-interfaces {
+ prefix if;
+ }
+ import ietf-inet-types {
+ prefix inet;
+ }
+ import ietf-yang-types {
+ prefix yang;
+ }
+
+ organization
+ "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+ contact
+ "WG Web: <http://tools.ietf.org/wg/netmod/>
+ WG List: <mailto:netmod@ietf.org>
+
+ WG Chair: Thomas Nadeau
+ <mailto:tnadeau@lucidvision.com>
+
+ WG Chair: Juergen Schoenwaelder
+ <mailto:j.schoenwaelder@jacobs-university.de>
+
+ Editor: Martin Bjorklund
+ <mailto:mbj@tail-f.com>";
+
+
+
+
+
+
+
+
+
+
+ description
+ "This module contains a collection of YANG definitions for
+ configuring IP implementations.
+
+ Copyright (c) 2014 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject
+ to the license terms contained in, the Simplified BSD License
+ set forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (http://trustee.ietf.org/license-info).
+
+ This version of this YANG module is part of RFC 7277; see
+ the RFC itself for full legal notices.";
+
+ revision 2014-06-16 {
+ description
+ "Initial revision.";
+ reference
+ "RFC 7277: A YANG Data Model for IP Management";
+ }
+
+ /*
+
+ * Features
+ */
+
+ feature ipv4-non-contiguous-netmasks {
+ description
+ "Indicates support for configuring non-contiguous
+ subnet masks.";
+ }
+
+ feature ipv6-privacy-autoconf {
+ description
+ "Indicates support for Privacy Extensions for Stateless Address
+ Autoconfiguration in IPv6.";
+ reference
+ "RFC 4941: Privacy Extensions for Stateless Address
+ Autoconfiguration in IPv6";
+ }
+
+
+
+
+
+ /*
+ * Typedefs
+ */
+
+ typedef ip-address-origin {
+ type enumeration {
+ enum other {
+ description
+ "None of the following.";
+ }
+ enum static {
+ description
+ "Indicates that the address has been statically
+ configured - for example, using NETCONF or a Command Line
+ Interface.";
+ }
+ enum dhcp {
+ description
+ "Indicates an address that has been assigned to this
+ system by a DHCP server.";
+ }
+ enum link-layer {
+ description
+ "Indicates an address created by IPv6 stateless
+ autoconfiguration that embeds a link-layer address in its
+ interface identifier.";
+ }
+ enum random {
+ description
+ "Indicates an address chosen by the system at
+
+ random, e.g., an IPv4 address within 169.254/16, an
+ RFC 4941 temporary address, or an RFC 7217 semantically
+ opaque address.";
+ reference
+ "RFC 4941: Privacy Extensions for Stateless Address
+ Autoconfiguration in IPv6
+ RFC 7217: A Method for Generating Semantically Opaque
+ Interface Identifiers with IPv6 Stateless
+ Address Autoconfiguration (SLAAC)";
+ }
+ }
+ description
+ "The origin of an address.";
+ }
+
+
+
+ typedef neighbor-origin {
+ type enumeration {
+ enum other {
+ description
+ "None of the following.";
+ }
+ enum static {
+ description
+ "Indicates that the mapping has been statically
+ configured - for example, using NETCONF or a Command Line
+ Interface.";
+ }
+ enum dynamic {
+ description
+ "Indicates that the mapping has been dynamically resolved
+ using, e.g., IPv4 ARP or the IPv6 Neighbor Discovery
+ protocol.";
+ }
+ }
+ description
+ "The origin of a neighbor entry.";
+ }
+
+ /*
+ * Configuration data nodes
+ */
+
+ augment "/if:interfaces/if:interface" {
+ description
+ "Parameters for configuring IP on interfaces.
+
+ If an interface is not capable of running IP, the server
+ must not allow the client to configure these parameters.";
+
+ container ipv4 {
+ presence
+ "Enables IPv4 unless the 'enabled' leaf
+ (which defaults to 'true') is set to 'false'";
+ description
+ "Parameters for the IPv4 address family.";
+
+
+
+
+
+
+
+
+ leaf enabled {
+ type boolean;
+ default true;
+ description
+ "Controls whether IPv4 is enabled or disabled on this
+ interface. When IPv4 is enabled, this interface is
+ connected to an IPv4 stack, and the interface can send
+ and receive IPv4 packets.";
+ }
+ leaf forwarding {
+ type boolean;
+ default false;
+ description
+ "Controls IPv4 packet forwarding of datagrams received by,
+ but not addressed to, this interface. IPv4 routers
+ forward datagrams. IPv4 hosts do not (except those
+ source-routed via the host).";
+ }
+ leaf mtu {
+ type uint16 {
+ range "68..max";
+ }
+ units octets;
+ description
+ "The size, in octets, of the largest IPv4 packet that the
+ interface will send and receive.
+
+ The server may restrict the allowed values for this leaf,
+ depending on the interface's type.
+
+ If this leaf is not configured, the operationally used MTU
+ depends on the interface's type.";
+ reference
+ "RFC 791: Internet Protocol";
+ }
+ list address {
+ key "ip";
+ description
+ "The list of configured IPv4 addresses on the interface.";
+
+ leaf ip {
+ type inet:ipv4-address-no-zone;
+ description
+ "The IPv4 address on the interface.";
+ }
+
+
+
+ choice subnet {
+ mandatory true;
+ description
+ "The subnet can be specified as a prefix-length, or,
+ if the server supports non-contiguous netmasks, as
+ a netmask.";
+ leaf prefix-length {
+ type uint8 {
+ range "0..32";
+ }
+ description
+ "The length of the subnet prefix.";
+ }
+ leaf netmask {
+ if-feature ipv4-non-contiguous-netmasks;
+ type yang:dotted-quad;
+ description
+ "The subnet specified as a netmask.";
+ }
+ }
+ }
+ list neighbor {
+ key "ip";
+ description
+ "A list of mappings from IPv4 addresses to
+ link-layer addresses.
+
+ Entries in this list are used as static entries in the
+ ARP Cache.";
+ reference
+ "RFC 826: An Ethernet Address Resolution Protocol";
+
+ leaf ip {
+ type inet:ipv4-address-no-zone;
+ description
+ "The IPv4 address of the neighbor node.";
+ }
+ leaf link-layer-address {
+ type yang:phys-address;
+ mandatory true;
+ description
+ "The link-layer address of the neighbor node.";
+ }
+ }
+
+ }
+
+
+ container ipv6 {
+ presence
+ "Enables IPv6 unless the 'enabled' leaf
+ (which defaults to 'true') is set to 'false'";
+ description
+ "Parameters for the IPv6 address family.";
+
+ leaf enabled {
+ type boolean;
+ default true;
+ description
+ "Controls whether IPv6 is enabled or disabled on this
+ interface. When IPv6 is enabled, this interface is
+ connected to an IPv6 stack, and the interface can send
+ and receive IPv6 packets.";
+ }
+ leaf forwarding {
+ type boolean;
+ default false;
+ description
+ "Controls IPv6 packet forwarding of datagrams received by,
+ but not addressed to, this interface. IPv6 routers
+ forward datagrams. IPv6 hosts do not (except those
+ source-routed via the host).";
+ reference
+ "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)
+ Section 6.2.1, IsRouter";
+ }
+ leaf mtu {
+ type uint32 {
+ range "1280..max";
+ }
+ units octets;
+ description
+ "The size, in octets, of the largest IPv6 packet that the
+ interface will send and receive.
+
+ The server may restrict the allowed values for this leaf,
+ depending on the interface's type.
+
+ If this leaf is not configured, the operationally used MTU
+ depends on the interface's type.";
+ reference
+ "RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
+ Section 5";
+ }
+
+
+ list address {
+ key "ip";
+ description
+ "The list of configured IPv6 addresses on the interface.";
+
+ leaf ip {
+ type inet:ipv6-address-no-zone;
+ description
+ "The IPv6 address on the interface.";
+ }
+ leaf prefix-length {
+ type uint8 {
+ range "0..128";
+ }
+ mandatory true;
+ description
+ "The length of the subnet prefix.";
+ }
+ }
+ list neighbor {
+ key "ip";
+ description
+ "A list of mappings from IPv6 addresses to
+ link-layer addresses.
+
+ Entries in this list are used as static entries in the
+ Neighbor Cache.";
+ reference
+ "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)";
+
+ leaf ip {
+ type inet:ipv6-address-no-zone;
+ description
+ "The IPv6 address of the neighbor node.";
+ }
+ leaf link-layer-address {
+ type yang:phys-address;
+ mandatory true;
+ description
+ "The link-layer address of the neighbor node.";
+ }
+ }
+
+
+
+
+
+
+ leaf dup-addr-detect-transmits {
+ type uint32;
+ default 1;
+ description
+ "The number of consecutive Neighbor Solicitation messages
+ sent while performing Duplicate Address Detection on a
+ tentative address. A value of zero indicates that
+ Duplicate Address Detection is not performed on
+ tentative addresses. A value of one indicates a single
+ transmission with no follow-up retransmissions.";
+ reference
+ "RFC 4862: IPv6 Stateless Address Autoconfiguration";
+ }
+ container autoconf {
+ description
+ "Parameters to control the autoconfiguration of IPv6
+ addresses, as described in RFC 4862.";
+ reference
+ "RFC 4862: IPv6 Stateless Address Autoconfiguration";
+
+ leaf create-global-addresses {
+ type boolean;
+ default true;
+ description
+ "If enabled, the host creates global addresses as
+ described in RFC 4862.";
+ reference
+ "RFC 4862: IPv6 Stateless Address Autoconfiguration
+ Section 5.5";
+ }
+ leaf create-temporary-addresses {
+ if-feature ipv6-privacy-autoconf;
+ type boolean;
+ default false;
+ description
+ "If enabled, the host creates temporary addresses as
+ described in RFC 4941.";
+ reference
+ "RFC 4941: Privacy Extensions for Stateless Address
+ Autoconfiguration in IPv6";
+ }
+
+
+
+
+
+
+
+ leaf temporary-valid-lifetime {
+ if-feature ipv6-privacy-autoconf;
+ type uint32;
+ units "seconds";
+ default 604800;
+ description
+ "The time period during which the temporary address
+ is valid.";
+ reference
+ "RFC 4941: Privacy Extensions for Stateless Address
+ Autoconfiguration in IPv6
+ - TEMP_VALID_LIFETIME";
+ }
+ leaf temporary-preferred-lifetime {
+ if-feature ipv6-privacy-autoconf;
+ type uint32;
+ units "seconds";
+ default 86400;
+ description
+ "The time period during which the temporary address is
+ preferred.";
+ reference
+ "RFC 4941: Privacy Extensions for Stateless Address
+ Autoconfiguration in IPv6
+ - TEMP_PREFERRED_LIFETIME";
+ }
+ }
+ }
+ }
+
+ /*
+ * Operational state data nodes
+ */
+
+ augment "/if:interfaces-state/if:interface" {
+ description
+ "Data nodes for the operational state of IP on interfaces.";
+
+ container ipv4 {
+ presence "Present if IPv4 is enabled on this interface";
+ config false;
+ description
+ "Interface-specific parameters for the IPv4 address family.";
+
+
+
+
+
+ leaf forwarding {
+ type boolean;
+ description
+ "Indicates whether IPv4 packet forwarding is enabled or
+ disabled on this interface.";
+ }
+ leaf mtu {
+ type uint16 {
+ range "68..max";
+ }
+ units octets;
+ description
+ "The size, in octets, of the largest IPv4 packet that the
+ interface will send and receive.";
+ reference
+ "RFC 791: Internet Protocol";
+ }
+ list address {
+ key "ip";
+ description
+ "The list of IPv4 addresses on the interface.";
+
+ leaf ip {
+ type inet:ipv4-address-no-zone;
+ description
+ "The IPv4 address on the interface.";
+ }
+ choice subnet {
+ description
+ "The subnet can be specified as a prefix-length, or,
+ if the server supports non-contiguous netmasks, as
+ a netmask.";
+ leaf prefix-length {
+ type uint8 {
+ range "0..32";
+ }
+ description
+ "The length of the subnet prefix.";
+ }
+ leaf netmask {
+ if-feature ipv4-non-contiguous-netmasks;
+ type yang:dotted-quad;
+ description
+ "The subnet specified as a netmask.";
+ }
+ }
+
+
+ leaf origin {
+ type ip-address-origin;
+ description
+ "The origin of this address.";
+ }
+ }
+ list neighbor {
+ key "ip";
+ description
+ "A list of mappings from IPv4 addresses to
+ link-layer addresses.
+
+ This list represents the ARP Cache.";
+ reference
+ "RFC 826: An Ethernet Address Resolution Protocol";
+
+ leaf ip {
+ type inet:ipv4-address-no-zone;
+ description
+ "The IPv4 address of the neighbor node.";
+ }
+ leaf link-layer-address {
+ type yang:phys-address;
+ description
+ "The link-layer address of the neighbor node.";
+ }
+ leaf origin {
+ type neighbor-origin;
+ description
+ "The origin of this neighbor entry.";
+ }
+ }
+
+ }
+
+ container ipv6 {
+ presence "Present if IPv6 is enabled on this interface";
+ config false;
+ description
+ "Parameters for the IPv6 address family.";
+
+
+
+
+
+
+
+
+ leaf forwarding {
+ type boolean;
+ default false;
+ description
+ "Indicates whether IPv6 packet forwarding is enabled or
+ disabled on this interface.";
+ reference
+ "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)
+ Section 6.2.1, IsRouter";
+ }
+ leaf mtu {
+ type uint32 {
+ range "1280..max";
+ }
+ units octets;
+ description
+ "The size, in octets, of the largest IPv6 packet that the
+ interface will send and receive.";
+ reference
+ "RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
+ Section 5";
+ }
+ list address {
+ key "ip";
+ description
+ "The list of IPv6 addresses on the interface.";
+
+ leaf ip {
+ type inet:ipv6-address-no-zone;
+ description
+ "The IPv6 address on the interface.";
+ }
+ leaf prefix-length {
+ type uint8 {
+ range "0..128";
+ }
+ mandatory true;
+ description
+ "The length of the subnet prefix.";
+ }
+ leaf origin {
+ type ip-address-origin;
+ description
+ "The origin of this address.";
+ }
+
+
+
+ leaf status {
+ type enumeration {
+ enum preferred {
+ description
+ "This is a valid address that can appear as the
+ destination or source address of a packet.";
+ }
+ enum deprecated {
+ description
+ "This is a valid but deprecated address that should
+ no longer be used as a source address in new
+ communications, but packets addressed to such an
+ address are processed as expected.";
+ }
+ enum invalid {
+ description
+ "This isn't a valid address, and it shouldn't appear
+ as the destination or source address of a packet.";
+ }
+ enum inaccessible {
+ description
+ "The address is not accessible because the interface
+ to which this address is assigned is not
+ operational.";
+ }
+ enum unknown {
+ description
+ "The status cannot be determined for some reason.";
+ }
+ enum tentative {
+ description
+ "The uniqueness of the address on the link is being
+ verified. Addresses in this state should not be
+ used for general communication and should only be
+ used to determine the uniqueness of the address.";
+ }
+ enum duplicate {
+ description
+ "The address has been determined to be non-unique on
+ the link and so must not be used.";
+ }
+
+
+
+
+
+
+
+ enum optimistic {
+ description
+ "The address is available for use, subject to
+ restrictions, while its uniqueness on a link is
+ being verified.";
+ }
+ }
+ description
+ "The status of an address. Most of the states correspond
+ to states from the IPv6 Stateless Address
+ Autoconfiguration protocol.";
+ reference
+ "RFC 4293: Management Information Base for the
+ Internet Protocol (IP)
+ - IpAddressStatusTC
+ RFC 4862: IPv6 Stateless Address Autoconfiguration";
+ }
+ }
+ list neighbor {
+ key "ip";
+ description
+ "A list of mappings from IPv6 addresses to
+ link-layer addresses.
+
+ This list represents the Neighbor Cache.";
+ reference
+ "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)";
+
+ leaf ip {
+ type inet:ipv6-address-no-zone;
+ description
+ "The IPv6 address of the neighbor node.";
+ }
+ leaf link-layer-address {
+ type yang:phys-address;
+ description
+ "The link-layer address of the neighbor node.";
+ }
+ leaf origin {
+ type neighbor-origin;
+ description
+ "The origin of this neighbor entry.";
+ }
+ leaf is-router {
+ type empty;
+ description
+ "Indicates that the neighbor node acts as a router.";
+ }
+ leaf state {
+ type enumeration {
+ enum incomplete {
+ description
+ "Address resolution is in progress, and the link-layer
+ address of the neighbor has not yet been
+ determined.";
+ }
+ enum reachable {
+ description
+ "Roughly speaking, the neighbor is known to have been
+ reachable recently (within tens of seconds ago).";
+ }
+ enum stale {
+ description
+ "The neighbor is no longer known to be reachable, but
+ until traffic is sent to the neighbor no attempt
+ should be made to verify its reachability.";
+ }
+ enum delay {
+ description
+ "The neighbor is no longer known to be reachable, and
+ traffic has recently been sent to the neighbor.
+ Rather than probe the neighbor immediately, however,
+ delay sending probes for a short while in order to
+ give upper-layer protocols a chance to provide
+ reachability confirmation.";
+ }
+ enum probe {
+ description
+ "The neighbor is no longer known to be reachable, and
+ unicast Neighbor Solicitation probes are being sent
+ to verify reachability.";
+ }
+ }
+ description
+ "The Neighbor Unreachability Detection state of this
+ entry.";
+ reference
+ "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)
+ Section 7.3.2";
+ }
+ }
+ }
+ }
+}
diff --git a/tests/modules/yang/ietf-netconf-acm@2018-02-14.yang b/tests/modules/yang/ietf-netconf-acm@2018-02-14.yang
new file mode 100644
index 0000000..bf4855f
--- /dev/null
+++ b/tests/modules/yang/ietf-netconf-acm@2018-02-14.yang
@@ -0,0 +1,464 @@
+module ietf-netconf-acm {
+
+ namespace "urn:ietf:params:xml:ns:yang:ietf-netconf-acm";
+
+ prefix nacm;
+
+ import ietf-yang-types {
+ prefix yang;
+ }
+
+ organization
+ "IETF NETCONF (Network Configuration) Working Group";
+
+ contact
+ "WG Web: <https://datatracker.ietf.org/wg/netconf/>
+ WG List: <mailto:netconf@ietf.org>
+
+ Author: Andy Bierman
+ <mailto:andy@yumaworks.com>
+
+ Author: Martin Bjorklund
+ <mailto:mbj@tail-f.com>";
+
+ description
+ "Network Configuration Access Control Model.
+
+ Copyright (c) 2012 - 2018 IETF Trust and the persons
+ identified as authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject
+ to the license terms contained in, the Simplified BSD
+ License set forth in Section 4.c of the IETF Trust's
+ Legal Provisions Relating to IETF Documents
+ (https://trustee.ietf.org/license-info).
+
+ This version of this YANG module is part of RFC 8341; see
+ the RFC itself for full legal notices.";
+
+ revision "2018-02-14" {
+ description
+ "Added support for YANG 1.1 actions and notifications tied to
+ data nodes. Clarified how NACM extensions can be used by
+ other data models.";
+ reference
+ "RFC 8341: Network Configuration Access Control Model";
+ }
+
+ revision "2012-02-22" {
+ description
+ "Initial version.";
+ reference
+ "RFC 6536: Network Configuration Protocol (NETCONF)
+ Access Control Model";
+ }
+
+ /*
+ * Extension statements
+ */
+
+ extension default-deny-write {
+ description
+ "Used to indicate that the data model node
+ represents a sensitive security system parameter.
+
+ If present, the NETCONF server will only allow the designated
+ 'recovery session' to have write access to the node. An
+ explicit access control rule is required for all other users.
+
+ If the NACM module is used, then it must be enabled (i.e.,
+ /nacm/enable-nacm object equals 'true'), or this extension
+ is ignored.
+
+ The 'default-deny-write' extension MAY appear within a data
+ definition statement. It is ignored otherwise.";
+ }
+
+ extension default-deny-all {
+ description
+ "Used to indicate that the data model node
+ controls a very sensitive security system parameter.
+
+ If present, the NETCONF server will only allow the designated
+ 'recovery session' to have read, write, or execute access to
+ the node. An explicit access control rule is required for all
+ other users.
+
+ If the NACM module is used, then it must be enabled (i.e.,
+ /nacm/enable-nacm object equals 'true'), or this extension
+ is ignored.
+
+ The 'default-deny-all' extension MAY appear within a data
+ definition statement, 'rpc' statement, or 'notification'
+ statement. It is ignored otherwise.";
+ }
+
+ /*
+ * Derived types
+ */
+
+ typedef user-name-type {
+ type string {
+ length "1..max";
+ }
+ description
+ "General-purpose username string.";
+ }
+
+ typedef matchall-string-type {
+ type string {
+ pattern '\*';
+ }
+ description
+ "The string containing a single asterisk '*' is used
+ to conceptually represent all possible values
+ for the particular leaf using this data type.";
+ }
+
+ typedef access-operations-type {
+ type bits {
+ bit create {
+ description
+ "Any protocol operation that creates a
+ new data node.";
+ }
+ bit read {
+ description
+ "Any protocol operation or notification that
+ returns the value of a data node.";
+ }
+ bit update {
+ description
+ "Any protocol operation that alters an existing
+ data node.";
+ }
+ bit delete {
+ description
+ "Any protocol operation that removes a data node.";
+ }
+ bit exec {
+ description
+ "Execution access to the specified protocol operation.";
+ }
+ }
+ description
+ "Access operation.";
+ }
+
+ typedef group-name-type {
+ type string {
+ length "1..max";
+ pattern '[^\*].*';
+ }
+ description
+ "Name of administrative group to which
+ users can be assigned.";
+ }
+
+ typedef action-type {
+ type enumeration {
+ enum permit {
+ description
+ "Requested action is permitted.";
+ }
+ enum deny {
+ description
+ "Requested action is denied.";
+ }
+ }
+ description
+ "Action taken by the server when a particular
+ rule matches.";
+ }
+
+ typedef node-instance-identifier {
+ type yang:xpath1.0;
+ description
+ "Path expression used to represent a special
+ data node, action, or notification instance-identifier
+ string.
+
+ A node-instance-identifier value is an
+ unrestricted YANG instance-identifier expression.
+ All the same rules as an instance-identifier apply,
+ except that predicates for keys are optional. If a key
+ predicate is missing, then the node-instance-identifier
+ represents all possible server instances for that key.
+
+ This XML Path Language (XPath) expression is evaluated in the
+ following context:
+
+ o The set of namespace declarations are those in scope on
+ the leaf element where this type is used.
+
+ o The set of variable bindings contains one variable,
+ 'USER', which contains the name of the user of the
+ current session.
+
+ o The function library is the core function library, but
+ note that due to the syntax restrictions of an
+ instance-identifier, no functions are allowed.
+
+ o The context node is the root node in the data tree.
+
+ The accessible tree includes actions and notifications tied
+ to data nodes.";
+ }
+
+ /*
+ * Data definition statements
+ */
+
+ container nacm {
+ nacm:default-deny-all;
+
+ description
+ "Parameters for NETCONF access control model.";
+
+ leaf enable-nacm {
+ type boolean;
+ default "true";
+ description
+ "Enables or disables all NETCONF access control
+ enforcement. If 'true', then enforcement
+ is enabled. If 'false', then enforcement
+ is disabled.";
+ }
+
+ leaf read-default {
+ type action-type;
+ default "permit";
+ description
+ "Controls whether read access is granted if
+ no appropriate rule is found for a
+ particular read request.";
+ }
+
+ leaf write-default {
+ type action-type;
+ default "deny";
+ description
+ "Controls whether create, update, or delete access
+ is granted if no appropriate rule is found for a
+ particular write request.";
+ }
+
+ leaf exec-default {
+ type action-type;
+ default "permit";
+ description
+ "Controls whether exec access is granted if no appropriate
+ rule is found for a particular protocol operation request.";
+ }
+
+ leaf enable-external-groups {
+ type boolean;
+ default "true";
+ description
+ "Controls whether the server uses the groups reported by the
+ NETCONF transport layer when it assigns the user to a set of
+ NACM groups. If this leaf has the value 'false', any group
+ names reported by the transport layer are ignored by the
+ server.";
+ }
+
+ leaf denied-operations {
+ type yang:zero-based-counter32;
+ config false;
+ mandatory true;
+ description
+ "Number of times since the server last restarted that a
+ protocol operation request was denied.";
+ }
+
+ leaf denied-data-writes {
+ type yang:zero-based-counter32;
+ config false;
+ mandatory true;
+ description
+ "Number of times since the server last restarted that a
+ protocol operation request to alter
+ a configuration datastore was denied.";
+ }
+
+ leaf denied-notifications {
+ type yang:zero-based-counter32;
+ config false;
+ mandatory true;
+ description
+ "Number of times since the server last restarted that
+ a notification was dropped for a subscription because
+ access to the event type was denied.";
+ }
+
+ container groups {
+ description
+ "NETCONF access control groups.";
+
+ list group {
+ key name;
+
+ description
+ "One NACM group entry. This list will only contain
+ configured entries, not any entries learned from
+ any transport protocols.";
+
+ leaf name {
+ type group-name-type;
+ description
+ "Group name associated with this entry.";
+ }
+
+ leaf-list user-name {
+ type user-name-type;
+ description
+ "Each entry identifies the username of
+ a member of the group associated with
+ this entry.";
+ }
+ }
+ }
+
+ list rule-list {
+ key name;
+ ordered-by user;
+ description
+ "An ordered collection of access control rules.";
+
+ leaf name {
+ type string {
+ length "1..max";
+ }
+ description
+ "Arbitrary name assigned to the rule-list.";
+ }
+ leaf-list group {
+ type union {
+ type matchall-string-type;
+ type group-name-type;
+ }
+ description
+ "List of administrative groups that will be
+ assigned the associated access rights
+ defined by the 'rule' list.
+
+ The string '*' indicates that all groups apply to the
+ entry.";
+ }
+
+ list rule {
+ key name;
+ ordered-by user;
+ description
+ "One access control rule.
+
+ Rules are processed in user-defined order until a match is
+ found. A rule matches if 'module-name', 'rule-type', and
+ 'access-operations' match the request. If a rule
+ matches, the 'action' leaf determines whether or not
+ access is granted.";
+
+ leaf name {
+ type string {
+ length "1..max";
+ }
+ description
+ "Arbitrary name assigned to the rule.";
+ }
+
+ leaf module-name {
+ type union {
+ type matchall-string-type;
+ type string;
+ }
+ default "*";
+ description
+ "Name of the module associated with this rule.
+
+ This leaf matches if it has the value '*' or if the
+ object being accessed is defined in the module with the
+ specified module name.";
+ }
+ choice rule-type {
+ description
+ "This choice matches if all leafs present in the rule
+ match the request. If no leafs are present, the
+ choice matches all requests.";
+ case protocol-operation {
+ leaf rpc-name {
+ type union {
+ type matchall-string-type;
+ type string;
+ }
+ description
+ "This leaf matches if it has the value '*' or if
+ its value equals the requested protocol operation
+ name.";
+ }
+ }
+ case notification {
+ leaf notification-name {
+ type union {
+ type matchall-string-type;
+ type string;
+ }
+ description
+ "This leaf matches if it has the value '*' or if its
+ value equals the requested notification name.";
+ }
+ }
+
+ case data-node {
+ leaf path {
+ type node-instance-identifier;
+ mandatory true;
+ description
+ "Data node instance-identifier associated with the
+ data node, action, or notification controlled by
+ this rule.
+
+ Configuration data or state data
+ instance-identifiers start with a top-level
+ data node. A complete instance-identifier is
+ required for this type of path value.
+
+ The special value '/' refers to all possible
+ datastore contents.";
+ }
+ }
+ }
+
+ leaf access-operations {
+ type union {
+ type matchall-string-type;
+ type access-operations-type;
+ }
+ default "*";
+ description
+ "Access operations associated with this rule.
+
+ This leaf matches if it has the value '*' or if the
+ bit corresponding to the requested operation is set.";
+ }
+
+ leaf action {
+ type action-type;
+ mandatory true;
+ description
+ "The access control action associated with the
+ rule. If a rule has been determined to match a
+ particular request, then this object is used
+ to determine whether to permit or deny the
+ request.";
+ }
+
+ leaf comment {
+ type string;
+ description
+ "A textual description of the access rule.";
+ }
+ }
+ }
+ }
+}
diff --git a/tests/modules/yang/ietf-netconf-nmda@2019-01-07.yang b/tests/modules/yang/ietf-netconf-nmda@2019-01-07.yang
new file mode 100644
index 0000000..31dce50
--- /dev/null
+++ b/tests/modules/yang/ietf-netconf-nmda@2019-01-07.yang
@@ -0,0 +1,385 @@
+ module ietf-netconf-nmda {
+ yang-version 1.1;
+ namespace "urn:ietf:params:xml:ns:yang:ietf-netconf-nmda";
+ prefix ncds;
+
+ import ietf-yang-types {
+ prefix yang;
+ reference
+ "RFC 6991: Common YANG Data Types";
+ }
+ import ietf-inet-types {
+ prefix inet;
+ reference
+ "RFC 6991: Common YANG Data Types";
+ }
+ import ietf-datastores {
+ prefix ds;
+ reference
+ "RFC 8342: Network Management Datastore Architecture
+ (NMDA)";
+ }
+ import ietf-origin {
+ prefix or;
+ reference
+ "RFC 8342: Network Management Datastore Architecture
+ (NMDA)";
+ }
+ import ietf-netconf {
+ prefix nc;
+ reference
+ "RFC 6241: Network Configuration Protocol (NETCONF)";
+ }
+ import ietf-netconf-with-defaults {
+ prefix ncwd;
+ reference
+ "RFC 6243: With-defaults Capability for NETCONF";
+ }
+
+ organization
+ "IETF NETCONF Working Group";
+
+ contact
+ "WG Web: <https://datatracker.ietf.org/wg/netconf/>
+
+ WG List: <mailto:netconf@ietf.org>
+
+ Author: Martin Bjorklund
+ <mailto:mbj@tail-f.com>
+
+ Author: Juergen Schoenwaelder
+ <mailto:j.schoenwaelder@jacobs-university.de>
+
+ Author: Phil Shafer
+ <mailto:phil@juniper.net>
+
+ Author: Kent Watsen
+ <mailto:kent+ietf@watsen.net>
+
+ Author: Robert Wilton
+ <mailto:rwilton@cisco.com>";
+ description
+ "This YANG module defines a set of NETCONF operations to support
+ the Network Management Datastore Architecture (NMDA).
+
+ The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL
+ NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED',
+ 'MAY', and 'OPTIONAL' in this document are to be interpreted as
+ described in BCP 14 (RFC 2119) (RFC 8174) when, and only when,
+ they appear in all capitals, as shown here.
+
+ Copyright (c) 2019 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject to
+ the license terms contained in, the Simplified BSD License set
+ forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (https://trustee.ietf.org/license-info).
+
+ This version of this YANG module is part of RFC 8526; see
+ the RFC itself for full legal notices.";
+
+ revision 2019-01-07 {
+ description
+ "Initial revision.";
+ reference
+ "RFC 8526: NETCONF Extensions to Support the Network Management
+ Datastore Architecture";
+ }
+
+ feature origin {
+ description
+ "Indicates that the server supports the 'origin' annotation.";
+ reference
+ "RFC 8342: Network Management Datastore Architecture (NMDA)";
+ }
+
+ feature with-defaults {
+ description
+ "NETCONF :with-defaults capability. If the server advertises
+ the :with-defaults capability for a session, then this
+ feature must also be enabled for that session. Otherwise,
+ this feature must not be enabled.";
+ reference
+ "RFC 6243: With-defaults Capability for NETCONF, Section 4; and
+ RFC 8526: NETCONF Extensions to Support the Network Management
+ Datastore Architecture, Section 3.1.1.2";
+ }
+
+ rpc get-data {
+ description
+ "Retrieve data from an NMDA datastore. The content returned
+ by get-data must satisfy all filters, i.e., the filter
+ criteria are logically ANDed.
+
+ Any ancestor nodes (including list keys) of nodes selected by
+ the filters are included in the response.
+
+ The 'with-origin' parameter is only valid for an operational
+ datastore. If 'with-origin' is used with an invalid
+ datastore, then the server MUST return an <rpc-error> element
+ with an <error-tag> value of 'invalid-value'.
+
+ The 'with-defaults' parameter only applies to the operational
+ datastore if the NETCONF :with-defaults and
+ :with-operational-defaults capabilities are both advertised.
+ If the 'with-defaults' parameter is present in a request for
+ which it is not supported, then the server MUST return an
+ <rpc-error> element with an <error-tag> value of
+ 'invalid-value'.";
+ input {
+ leaf datastore {
+ type ds:datastore-ref;
+ mandatory true;
+ description
+ "Datastore from which to retrieve data.
+
+ If the datastore is not supported by the server, then the
+ server MUST return an <rpc-error> element with an
+ <error-tag> value of 'invalid-value'.";
+ }
+ choice filter-spec {
+ description
+ "The content filter specification for this request.";
+ anydata subtree-filter {
+ description
+ "This parameter identifies the portions of the
+ target datastore to retrieve.";
+ reference
+ "RFC 6241: Network Configuration Protocol (NETCONF),
+ Section 6";
+ }
+ leaf xpath-filter {
+ if-feature "nc:xpath";
+ type yang:xpath1.0;
+ description
+ "This parameter contains an XPath expression identifying
+ the portions of the target datastore to retrieve.
+
+ If the expression returns a node-set, all nodes in the
+ node-set are selected by the filter. Otherwise, if the
+ expression does not return a node-set, then the
+ <get-data> operation fails.
+
+ The expression is evaluated in the following XPath
+ context:
+
+ o The set of namespace declarations are those in
+ scope on the 'xpath-filter' leaf element.
+
+ o The set of variable bindings is empty.
+
+ o The function library is the core function library,
+ and the XPath functions are defined in Section 10
+ of RFC 7950.
+
+ o The context node is the root node of the target
+ datastore.";
+ }
+ }
+ leaf config-filter {
+ type boolean;
+ description
+ "Filter for nodes with the given value for their 'config'
+ property. When this leaf is set to 'true', only 'config
+ true' nodes are selected, and when set to 'false', only
+ 'config false' nodes are selected. If this leaf is not
+ present, no nodes are filtered.";
+ }
+ choice origin-filters {
+ when 'derived-from-or-self(datastore, "ds:operational")';
+ if-feature "origin";
+ description
+ "Filters configuration nodes based on the 'origin'
+ annotation. Configuration nodes that do not have an
+ 'origin' annotation are treated as if they have the
+ 'origin' annotation 'or:unknown'.
+
+ System state nodes are not affected by origin-filters and
+ thus not filtered. Note that system state nodes can be
+ filtered with the 'config-filter' leaf.";
+
+ leaf-list origin-filter {
+ type or:origin-ref;
+ description
+ "Filter based on the 'origin' annotation. A
+ configuration node matches the filter if its 'origin'
+ annotation is derived from or equal to any of the given
+ filter values.";
+ }
+ leaf-list negated-origin-filter {
+ type or:origin-ref;
+ description
+ "Filter based on the 'origin' annotation. A
+ configuration node matches the filter if its 'origin'
+ annotation is neither derived from nor equal to any of
+ the given filter values.";
+ }
+ }
+ leaf max-depth {
+ type union {
+ type uint16 {
+ range "1..65535";
+ }
+ type enumeration {
+ enum unbounded {
+ description
+ "All descendant nodes are included.";
+ }
+ }
+ }
+ default "unbounded";
+ description
+ "For each node selected by the filters, this parameter
+ selects how many conceptual subtree levels should be
+ returned in the reply. If the depth is 1, the reply
+ includes just the selected nodes but no children. If the
+ depth is 'unbounded', all descendant nodes are included.";
+ }
+ leaf with-origin {
+ when 'derived-from-or-self(../datastore, "ds:operational")';
+ if-feature "origin";
+ type empty;
+ description
+ "If this parameter is present, the server will return
+ the 'origin' annotation for the nodes that have one.";
+ }
+ uses ncwd:with-defaults-parameters {
+ if-feature "with-defaults";
+ }
+ }
+ output {
+ anydata data {
+ description
+ "Copy of the source datastore subset that matched
+ the filter criteria (if any). An empty data
+ container indicates that the request did not
+ produce any results.";
+ }
+ }
+ }
+
+ rpc edit-data {
+ description
+ "Edit data in an NMDA datastore.
+
+ If an error condition occurs such that an error severity
+ <rpc-error> element is generated, the server will stop
+ processing the <edit-data> operation and restore the
+ specified configuration to its complete state at
+ the start of this <edit-data> operation.";
+ input {
+ leaf datastore {
+ type ds:datastore-ref;
+ mandatory true;
+ description
+ "Datastore that is the target of the <edit-data> operation.
+
+ If the target datastore is not writable, or is not
+ supported by the server, then the server MUST return an
+ <rpc-error> element with an <error-tag> value of
+ 'invalid-value'.";
+ }
+ leaf default-operation {
+ type enumeration {
+ enum merge {
+ description
+ "The default operation is merge.";
+ }
+ enum replace {
+ description
+ "The default operation is replace.";
+ }
+ enum none {
+ description
+ "There is no default operation.";
+ }
+ }
+ default "merge";
+ description
+ "The default operation to use.";
+ }
+ choice edit-content {
+ mandatory true;
+ description
+ "The content for the edit operation.";
+ anydata config {
+ description
+ "Inline config content.";
+ }
+ leaf url {
+ if-feature "nc:url";
+ type inet:uri;
+ description
+ "URL-based config content.";
+ }
+ }
+ }
+ }
+
+ /*
+ * Augment the <lock> and <unlock> operations with a
+ * "datastore" parameter.
+ */
+
+ augment "/nc:lock/nc:input/nc:target/nc:config-target" {
+ description
+ "Add NMDA datastore as target.";
+ leaf datastore {
+ type ds:datastore-ref;
+ description
+ "Datastore to lock.
+
+ The <lock> operation is only supported on writable
+ datastores.
+
+ If the <lock> operation is not supported by the server on
+ the specified target datastore, then the server MUST return
+ an <rpc-error> element with an <error-tag> value of
+ 'invalid-value'.";
+ }
+ }
+
+ augment "/nc:unlock/nc:input/nc:target/nc:config-target" {
+ description
+ "Add NMDA datastore as target.";
+ leaf datastore {
+ type ds:datastore-ref;
+ description
+ "Datastore to unlock.
+
+ The <unlock> operation is only supported on writable
+ datastores.
+
+ If the <unlock> operation is not supported by the server on
+ the specified target datastore, then the server MUST return
+ an <rpc-error> element with an <error-tag> value of
+ 'invalid-value'.";
+ }
+ }
+
+ /*
+ * Augment the <validate> operation with a
+ * "datastore" parameter.
+ */
+
+ augment "/nc:validate/nc:input/nc:source/nc:config-source" {
+ description
+ "Add NMDA datastore as source.";
+ leaf datastore {
+ type ds:datastore-ref;
+ description
+ "Datastore to validate.
+
+ The <validate> operation is supported only on configuration
+ datastores.
+
+ If the <validate> operation is not supported by the server
+ on the specified target datastore, then the server MUST
+ return an <rpc-error> element with an <error-tag> value of
+ 'invalid-value'.";
+ }
+ }
+ }
diff --git a/tests/modules/yang/ietf-netconf-with-defaults@2011-06-01.yang b/tests/modules/yang/ietf-netconf-with-defaults@2011-06-01.yang
new file mode 100644
index 0000000..e19d2b3
--- /dev/null
+++ b/tests/modules/yang/ietf-netconf-with-defaults@2011-06-01.yang
@@ -0,0 +1,140 @@
+module ietf-netconf-with-defaults {
+
+ namespace "urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults";
+
+ prefix ncwd;
+
+ import ietf-netconf { prefix nc; }
+
+ organization
+ "IETF NETCONF (Network Configuration Protocol) Working Group";
+
+ contact
+ "WG Web: <http://tools.ietf.org/wg/netconf/>
+
+ WG List: <netconf@ietf.org>
+
+ WG Chair: Bert Wijnen
+ <bertietf@bwijnen.net>
+
+ WG Chair: Mehmet Ersue
+ <mehmet.ersue@nsn.com>
+
+ Editor: Andy Bierman
+ <andy.bierman@brocade.com>
+
+ Editor: Balazs Lengyel
+ <balazs.lengyel@ericsson.com>";
+
+ description
+ "This module defines an extension to the NETCONF protocol
+ that allows the NETCONF client to control how default
+ values are handled by the server in particular NETCONF
+ operations.
+
+ Copyright (c) 2011 IETF Trust and the persons identified as
+ the document authors. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject
+ to the license terms contained in, the Simplified BSD License
+ set forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (http://trustee.ietf.org/license-info).
+
+ This version of this YANG module is part of RFC 6243; see
+ the RFC itself for full legal notices.";
+
+ revision 2011-06-01 {
+ description
+ "Initial version.";
+ reference
+ "RFC 6243: With-defaults Capability for NETCONF";
+ }
+
+ typedef with-defaults-mode {
+ description
+ "Possible modes to report default data.";
+ reference
+ "RFC 6243; Section 3.";
+ type enumeration {
+ enum report-all {
+ description
+ "All default data is reported.";
+ reference
+ "RFC 6243; Section 3.1";
+ }
+ enum report-all-tagged {
+ description
+ "All default data is reported.
+ Any nodes considered to be default data
+ will contain a 'default' XML attribute,
+ set to 'true' or '1'.";
+ reference
+ "RFC 6243; Section 3.4";
+ }
+ enum trim {
+ description
+ "Values are not reported if they contain the default.";
+ reference
+ "RFC 6243; Section 3.2";
+ }
+ enum explicit {
+ description
+ "Report values that contain the definition of
+ explicitly set data.";
+ reference
+ "RFC 6243; Section 3.3";
+ }
+ }
+ }
+
+ grouping with-defaults-parameters {
+ description
+ "Contains the <with-defaults> parameter for control
+ of defaults in NETCONF retrieval operations.";
+
+ leaf with-defaults {
+ description
+ "The explicit defaults processing mode requested.";
+ reference
+ "RFC 6243; Section 4.5.1";
+
+ type with-defaults-mode;
+ }
+ }
+
+ // extending the get-config operation
+ augment /nc:get-config/nc:input {
+ description
+ "Adds the <with-defaults> parameter to the
+ input of the NETCONF <get-config> operation.";
+ reference
+ "RFC 6243; Section 4.5.1";
+
+ uses with-defaults-parameters;
+ }
+
+ // extending the get operation
+ augment /nc:get/nc:input {
+ description
+ "Adds the <with-defaults> parameter to
+ the input of the NETCONF <get> operation.";
+ reference
+ "RFC 6243; Section 4.5.1";
+
+ uses with-defaults-parameters;
+ }
+
+ // extending the copy-config operation
+ augment /nc:copy-config/nc:input {
+ description
+ "Adds the <with-defaults> parameter to
+ the input of the NETCONF <copy-config> operation.";
+ reference
+ "RFC 6243; Section 4.5.1";
+
+ uses with-defaults-parameters;
+ }
+
+}
diff --git a/tests/modules/yang/ietf-netconf@2011-06-01.yang b/tests/modules/yang/ietf-netconf@2011-06-01.yang
new file mode 100644
index 0000000..6449421
--- /dev/null
+++ b/tests/modules/yang/ietf-netconf@2011-06-01.yang
@@ -0,0 +1,934 @@
+module ietf-netconf {
+
+ // the namespace for NETCONF XML definitions is unchanged
+ // from RFC 4741, which this document replaces
+ namespace "urn:ietf:params:xml:ns:netconf:base:1.0";
+
+ prefix nc;
+
+ import ietf-inet-types {
+ prefix inet;
+ }
+
+ import ietf-netconf-acm { prefix nacm; }
+
+ organization
+ "IETF NETCONF (Network Configuration) Working Group";
+
+ contact
+ "WG Web: <http://tools.ietf.org/wg/netconf/>
+ WG List: <netconf@ietf.org>
+
+ WG Chair: Bert Wijnen
+ <bertietf@bwijnen.net>
+
+ WG Chair: Mehmet Ersue
+ <mehmet.ersue@nsn.com>
+
+ Editor: Martin Bjorklund
+ <mbj@tail-f.com>
+
+ Editor: Juergen Schoenwaelder
+ <j.schoenwaelder@jacobs-university.de>
+
+ Editor: Andy Bierman
+ <andy.bierman@brocade.com>";
+ description
+ "NETCONF Protocol Data Types and Protocol Operations.
+
+ Copyright (c) 2011 IETF Trust and the persons identified as
+ the document authors. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject
+ to the license terms contained in, the Simplified BSD License
+ set forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (http://trustee.ietf.org/license-info).
+
+ This version of this YANG module is part of RFC 6241; see
+ the RFC itself for full legal notices.";
+
+ revision 2011-06-01 {
+ description
+ "Initial revision;
+ 2013-09-29: Updated to include NACM attributes,
+ as specified in RFC 6536: sec 3.2.5 and 3.2.8";
+ reference
+ "RFC 6241: Network Configuration Protocol";
+ }
+
+ extension get-filter-element-attributes {
+ description
+ "If this extension is present within an 'anyxml'
+ statement named 'filter', which must be conceptually
+ defined within the RPC input section for the <get>
+ and <get-config> protocol operations, then the
+ following unqualified XML attribute is supported
+ within the <filter> element, within a <get> or
+ <get-config> protocol operation:
+
+ type : optional attribute with allowed
+ value strings 'subtree' and 'xpath'.
+ If missing, the default value is 'subtree'.
+
+ If the 'xpath' feature is supported, then the
+ following unqualified XML attribute is
+ also supported:
+
+ select: optional attribute containing a
+ string representing an XPath expression.
+ The 'type' attribute must be equal to 'xpath'
+ if this attribute is present.";
+ }
+
+ // NETCONF capabilities defined as features
+ feature writable-running {
+ description
+ "NETCONF :writable-running capability;
+ If the server advertises the :writable-running
+ capability for a session, then this feature must
+ also be enabled for that session. Otherwise,
+ this feature must not be enabled.";
+ reference "RFC 6241, Section 8.2";
+ }
+
+ feature candidate {
+ description
+ "NETCONF :candidate capability;
+ If the server advertises the :candidate
+ capability for a session, then this feature must
+ also be enabled for that session. Otherwise,
+ this feature must not be enabled.";
+ reference "RFC 6241, Section 8.3";
+ }
+
+ feature confirmed-commit {
+ if-feature candidate;
+ description
+ "NETCONF :confirmed-commit:1.1 capability;
+ If the server advertises the :confirmed-commit:1.1
+ capability for a session, then this feature must
+ also be enabled for that session. Otherwise,
+ this feature must not be enabled.";
+
+ reference "RFC 6241, Section 8.4";
+ }
+
+ feature rollback-on-error {
+ description
+ "NETCONF :rollback-on-error capability;
+ If the server advertises the :rollback-on-error
+ capability for a session, then this feature must
+ also be enabled for that session. Otherwise,
+ this feature must not be enabled.";
+ reference "RFC 6241, Section 8.5";
+ }
+
+ feature validate {
+ description
+ "NETCONF :validate:1.1 capability;
+ If the server advertises the :validate:1.1
+ capability for a session, then this feature must
+ also be enabled for that session. Otherwise,
+ this feature must not be enabled.";
+ reference "RFC 6241, Section 8.6";
+ }
+
+ feature startup {
+ description
+ "NETCONF :startup capability;
+ If the server advertises the :startup
+ capability for a session, then this feature must
+ also be enabled for that session. Otherwise,
+ this feature must not be enabled.";
+ reference "RFC 6241, Section 8.7";
+ }
+
+ feature url {
+ description
+ "NETCONF :url capability;
+ If the server advertises the :url
+ capability for a session, then this feature must
+ also be enabled for that session. Otherwise,
+ this feature must not be enabled.";
+ reference "RFC 6241, Section 8.8";
+ }
+
+ feature xpath {
+ description
+ "NETCONF :xpath capability;
+ If the server advertises the :xpath
+ capability for a session, then this feature must
+ also be enabled for that session. Otherwise,
+ this feature must not be enabled.";
+ reference "RFC 6241, Section 8.9";
+ }
+
+ // NETCONF Simple Types
+
+ typedef session-id-type {
+ type uint32 {
+ range "1..max";
+ }
+ description
+ "NETCONF Session Id";
+ }
+
+ typedef session-id-or-zero-type {
+ type uint32;
+ description
+ "NETCONF Session Id or Zero to indicate none";
+ }
+ typedef error-tag-type {
+ type enumeration {
+ enum in-use {
+ description
+ "The request requires a resource that
+ already is in use.";
+ }
+ enum invalid-value {
+ description
+ "The request specifies an unacceptable value for one
+ or more parameters.";
+ }
+ enum too-big {
+ description
+ "The request or response (that would be generated) is
+ too large for the implementation to handle.";
+ }
+ enum missing-attribute {
+ description
+ "An expected attribute is missing.";
+ }
+ enum bad-attribute {
+ description
+ "An attribute value is not correct; e.g., wrong type,
+ out of range, pattern mismatch.";
+ }
+ enum unknown-attribute {
+ description
+ "An unexpected attribute is present.";
+ }
+ enum missing-element {
+ description
+ "An expected element is missing.";
+ }
+ enum bad-element {
+ description
+ "An element value is not correct; e.g., wrong type,
+ out of range, pattern mismatch.";
+ }
+ enum unknown-element {
+ description
+ "An unexpected element is present.";
+ }
+ enum unknown-namespace {
+ description
+ "An unexpected namespace is present.";
+ }
+ enum access-denied {
+ description
+ "Access to the requested protocol operation or
+ data model is denied because authorization failed.";
+ }
+ enum lock-denied {
+ description
+ "Access to the requested lock is denied because the
+ lock is currently held by another entity.";
+ }
+ enum resource-denied {
+ description
+ "Request could not be completed because of
+ insufficient resources.";
+ }
+ enum rollback-failed {
+ description
+ "Request to roll back some configuration change (via
+ rollback-on-error or <discard-changes> operations)
+ was not completed for some reason.";
+
+ }
+ enum data-exists {
+ description
+ "Request could not be completed because the relevant
+ data model content already exists. For example,
+ a 'create' operation was attempted on data that
+ already exists.";
+ }
+ enum data-missing {
+ description
+ "Request could not be completed because the relevant
+ data model content does not exist. For example,
+ a 'delete' operation was attempted on
+ data that does not exist.";
+ }
+ enum operation-not-supported {
+ description
+ "Request could not be completed because the requested
+ operation is not supported by this implementation.";
+ }
+ enum operation-failed {
+ description
+ "Request could not be completed because the requested
+ operation failed for some reason not covered by
+ any other error condition.";
+ }
+ enum partial-operation {
+ description
+ "This error-tag is obsolete, and SHOULD NOT be sent
+ by servers conforming to this document.";
+ }
+ enum malformed-message {
+ description
+ "A message could not be handled because it failed to
+ be parsed correctly. For example, the message is not
+ well-formed XML or it uses an invalid character set.";
+ }
+ }
+ description "NETCONF Error Tag";
+ reference "RFC 6241, Appendix A";
+ }
+
+ typedef error-severity-type {
+ type enumeration {
+ enum error {
+ description "Error severity";
+ }
+ enum warning {
+ description "Warning severity";
+ }
+ }
+ description "NETCONF Error Severity";
+ reference "RFC 6241, Section 4.3";
+ }
+
+ typedef edit-operation-type {
+ type enumeration {
+ enum merge {
+ description
+ "The configuration data identified by the
+ element containing this attribute is merged
+ with the configuration at the corresponding
+ level in the configuration datastore identified
+ by the target parameter.";
+ }
+ enum replace {
+ description
+ "The configuration data identified by the element
+ containing this attribute replaces any related
+ configuration in the configuration datastore
+ identified by the target parameter. If no such
+ configuration data exists in the configuration
+ datastore, it is created. Unlike a
+ <copy-config> operation, which replaces the
+ entire target configuration, only the configuration
+ actually present in the config parameter is affected.";
+ }
+ enum create {
+ description
+ "The configuration data identified by the element
+ containing this attribute is added to the
+ configuration if and only if the configuration
+ data does not already exist in the configuration
+ datastore. If the configuration data exists, an
+ <rpc-error> element is returned with an
+ <error-tag> value of 'data-exists'.";
+ }
+ enum delete {
+ description
+ "The configuration data identified by the element
+ containing this attribute is deleted from the
+ configuration if and only if the configuration
+ data currently exists in the configuration
+ datastore. If the configuration data does not
+ exist, an <rpc-error> element is returned with
+ an <error-tag> value of 'data-missing'.";
+ }
+ enum remove {
+ description
+ "The configuration data identified by the element
+ containing this attribute is deleted from the
+ configuration if the configuration
+ data currently exists in the configuration
+ datastore. If the configuration data does not
+ exist, the 'remove' operation is silently ignored
+ by the server.";
+ }
+ }
+ default "merge";
+ description "NETCONF 'operation' attribute values";
+ reference "RFC 6241, Section 7.2";
+ }
+
+ // NETCONF Standard Protocol Operations
+
+ rpc get-config {
+ description
+ "Retrieve all or part of a specified configuration.";
+
+ reference "RFC 6241, Section 7.1";
+
+ input {
+ container source {
+ description
+ "Particular configuration to retrieve.";
+
+ choice config-source {
+ mandatory true;
+ description
+ "The configuration to retrieve.";
+ leaf candidate {
+ if-feature candidate;
+ type empty;
+ description
+ "The candidate configuration is the config source.";
+ }
+ leaf running {
+ type empty;
+ description
+ "The running configuration is the config source.";
+ }
+ leaf startup {
+ if-feature startup;
+ type empty;
+ description
+ "The startup configuration is the config source.
+ This is optional-to-implement on the server because
+ not all servers will support filtering for this
+ datastore.";
+ }
+ }
+ }
+
+ anyxml filter {
+ description
+ "Subtree or XPath filter to use.";
+ nc:get-filter-element-attributes;
+ }
+ }
+
+ output {
+ anyxml data {
+ description
+ "Copy of the source datastore subset that matched
+ the filter criteria (if any). An empty data container
+ indicates that the request did not produce any results.";
+ }
+ }
+ }
+
+ rpc edit-config {
+ description
+ "The <edit-config> operation loads all or part of a specified
+ configuration to the specified target configuration.";
+
+ reference "RFC 6241, Section 7.2";
+
+ input {
+ container target {
+ description
+ "Particular configuration to edit.";
+
+ choice config-target {
+ mandatory true;
+ description
+ "The configuration target.";
+
+ leaf candidate {
+ if-feature candidate;
+ type empty;
+ description
+ "The candidate configuration is the config target.";
+ }
+ leaf running {
+ if-feature writable-running;
+ type empty;
+ description
+ "The running configuration is the config source.";
+ }
+ }
+ }
+
+ leaf default-operation {
+ type enumeration {
+ enum merge {
+ description
+ "The default operation is merge.";
+ }
+ enum replace {
+ description
+ "The default operation is replace.";
+ }
+ enum none {
+ description
+ "There is no default operation.";
+ }
+ }
+ default "merge";
+ description
+ "The default operation to use.";
+ }
+
+ leaf test-option {
+ if-feature validate;
+ type enumeration {
+ enum test-then-set {
+ description
+ "The server will test and then set if no errors.";
+ }
+ enum set {
+ description
+ "The server will set without a test first.";
+ }
+
+ enum test-only {
+ description
+ "The server will only test and not set, even
+ if there are no errors.";
+ }
+ }
+ default "test-then-set";
+ description
+ "The test option to use.";
+ }
+
+ leaf error-option {
+ type enumeration {
+ enum stop-on-error {
+ description
+ "The server will stop on errors.";
+ }
+ enum continue-on-error {
+ description
+ "The server may continue on errors.";
+ }
+ enum rollback-on-error {
+ description
+ "The server will roll back on errors.
+ This value can only be used if the 'rollback-on-error'
+ feature is supported.";
+ }
+ }
+ default "stop-on-error";
+ description
+ "The error option to use.";
+ }
+
+ choice edit-content {
+ mandatory true;
+ description
+ "The content for the edit operation.";
+
+ anyxml config {
+ description
+ "Inline Config content.";
+ }
+ leaf url {
+ if-feature url;
+ type inet:uri;
+ description
+ "URL-based config content.";
+ }
+ }
+ }
+ }
+
+ rpc copy-config {
+ description
+ "Create or replace an entire configuration datastore with the
+ contents of another complete configuration datastore.";
+
+ reference "RFC 6241, Section 7.3";
+
+ input {
+ container target {
+ description
+ "Particular configuration to copy to.";
+
+ choice config-target {
+ mandatory true;
+ description
+ "The configuration target of the copy operation.";
+
+ leaf candidate {
+ if-feature candidate;
+ type empty;
+ description
+ "The candidate configuration is the config target.";
+ }
+ leaf running {
+ if-feature writable-running;
+ type empty;
+ description
+ "The running configuration is the config target.
+ This is optional-to-implement on the server.";
+ }
+ leaf startup {
+ if-feature startup;
+ type empty;
+ description
+ "The startup configuration is the config target.";
+ }
+ leaf url {
+ if-feature url;
+ type inet:uri;
+ description
+ "The URL-based configuration is the config target.";
+ }
+ }
+ }
+
+ container source {
+ description
+ "Particular configuration to copy from.";
+
+ choice config-source {
+ mandatory true;
+ description
+ "The configuration source for the copy operation.";
+
+ leaf candidate {
+ if-feature candidate;
+ type empty;
+ description
+ "The candidate configuration is the config source.";
+ }
+ leaf running {
+ type empty;
+ description
+ "The running configuration is the config source.";
+ }
+ leaf startup {
+ if-feature startup;
+ type empty;
+ description
+ "The startup configuration is the config source.";
+ }
+ leaf url {
+ if-feature url;
+ type inet:uri;
+ description
+ "The URL-based configuration is the config source.";
+ }
+ anyxml config {
+ description
+ "Inline Config content: <config> element. Represents
+ an entire configuration datastore, not
+ a subset of the running datastore.";
+ }
+ }
+ }
+ }
+ }
+
+ rpc delete-config {
+ nacm:default-deny-all;
+ description
+ "Delete a configuration datastore.";
+
+ reference "RFC 6241, Section 7.4";
+
+ input {
+ container target {
+ description
+ "Particular configuration to delete.";
+
+ choice config-target {
+ mandatory true;
+ description
+ "The configuration target to delete.";
+
+ leaf startup {
+ if-feature startup;
+ type empty;
+ description
+ "The startup configuration is the config target.";
+ }
+ leaf url {
+ if-feature url;
+ type inet:uri;
+ description
+ "The URL-based configuration is the config target.";
+ }
+ }
+ }
+ }
+ }
+
+ rpc lock {
+ description
+ "The lock operation allows the client to lock the configuration
+ system of a device.";
+
+ reference "RFC 6241, Section 7.5";
+
+ input {
+ container target {
+ description
+ "Particular configuration to lock.";
+
+ choice config-target {
+ mandatory true;
+ description
+ "The configuration target to lock.";
+
+ leaf candidate {
+ if-feature candidate;
+ type empty;
+ description
+ "The candidate configuration is the config target.";
+ }
+ leaf running {
+ type empty;
+ description
+ "The running configuration is the config target.";
+ }
+ leaf startup {
+ if-feature startup;
+ type empty;
+ description
+ "The startup configuration is the config target.";
+ }
+ }
+ }
+ }
+ }
+
+ rpc unlock {
+ description
+ "The unlock operation is used to release a configuration lock,
+ previously obtained with the 'lock' operation.";
+
+ reference "RFC 6241, Section 7.6";
+
+ input {
+ container target {
+ description
+ "Particular configuration to unlock.";
+
+ choice config-target {
+ mandatory true;
+ description
+ "The configuration target to unlock.";
+
+ leaf candidate {
+ if-feature candidate;
+ type empty;
+ description
+ "The candidate configuration is the config target.";
+ }
+ leaf running {
+ type empty;
+ description
+ "The running configuration is the config target.";
+ }
+ leaf startup {
+ if-feature startup;
+ type empty;
+ description
+ "The startup configuration is the config target.";
+ }
+ }
+ }
+ }
+ }
+
+ rpc get {
+ description
+ "Retrieve running configuration and device state information.";
+
+ reference "RFC 6241, Section 7.7";
+
+ input {
+ anyxml filter {
+ description
+ "This parameter specifies the portion of the system
+ configuration and state data to retrieve.";
+ nc:get-filter-element-attributes;
+ }
+ }
+
+ output {
+ anyxml data {
+ description
+ "Copy of the running datastore subset and/or state
+ data that matched the filter criteria (if any).
+ An empty data container indicates that the request did not
+ produce any results.";
+ }
+ }
+ }
+
+ rpc close-session {
+ description
+ "Request graceful termination of a NETCONF session.";
+
+ reference "RFC 6241, Section 7.8";
+ }
+
+ rpc kill-session {
+ nacm:default-deny-all;
+ description
+ "Force the termination of a NETCONF session.";
+
+ reference "RFC 6241, Section 7.9";
+
+ input {
+ leaf session-id {
+ type session-id-type;
+ mandatory true;
+ description
+ "Particular session to kill.";
+ }
+ }
+ }
+
+ rpc commit {
+ if-feature candidate;
+
+ description
+ "Commit the candidate configuration as the device's new
+ current configuration.";
+
+ reference "RFC 6241, Section 8.3.4.1";
+
+ input {
+ leaf confirmed {
+ if-feature confirmed-commit;
+ type empty;
+ description
+ "Requests a confirmed commit.";
+ reference "RFC 6241, Section 8.3.4.1";
+ }
+
+ leaf confirm-timeout {
+ if-feature confirmed-commit;
+ type uint32 {
+ range "1..max";
+ }
+ units "seconds";
+ default "600"; // 10 minutes
+ description
+ "The timeout interval for a confirmed commit.";
+ reference "RFC 6241, Section 8.3.4.1";
+ }
+
+ leaf persist {
+ if-feature confirmed-commit;
+ type string;
+ description
+ "This parameter is used to make a confirmed commit
+ persistent. A persistent confirmed commit is not aborted
+ if the NETCONF session terminates. The only way to abort
+ a persistent confirmed commit is to let the timer expire,
+ or to use the <cancel-commit> operation.
+
+ The value of this parameter is a token that must be given
+ in the 'persist-id' parameter of <commit> or
+ <cancel-commit> operations in order to confirm or cancel
+ the persistent confirmed commit.
+
+ The token should be a random string.";
+ reference "RFC 6241, Section 8.3.4.1";
+ }
+
+ leaf persist-id {
+ if-feature confirmed-commit;
+ type string;
+ description
+ "This parameter is given in order to commit a persistent
+ confirmed commit. The value must be equal to the value
+ given in the 'persist' parameter to the <commit> operation.
+ If it does not match, the operation fails with an
+ 'invalid-value' error.";
+ reference "RFC 6241, Section 8.3.4.1";
+ }
+
+ }
+ }
+
+ rpc discard-changes {
+ if-feature candidate;
+
+ description
+ "Revert the candidate configuration to the current
+ running configuration.";
+ reference "RFC 6241, Section 8.3.4.2";
+ }
+
+ rpc cancel-commit {
+ if-feature confirmed-commit;
+ description
+ "This operation is used to cancel an ongoing confirmed commit.
+ If the confirmed commit is persistent, the parameter
+ 'persist-id' must be given, and it must match the value of the
+ 'persist' parameter.";
+ reference "RFC 6241, Section 8.4.4.1";
+
+ input {
+ leaf persist-id {
+ type string;
+ description
+ "This parameter is given in order to cancel a persistent
+ confirmed commit. The value must be equal to the value
+ given in the 'persist' parameter to the <commit> operation.
+ If it does not match, the operation fails with an
+ 'invalid-value' error.";
+ }
+ }
+ }
+
+ rpc validate {
+ if-feature validate;
+
+ description
+ "Validates the contents of the specified configuration.";
+
+ reference "RFC 6241, Section 8.6.4.1";
+
+ input {
+ container source {
+ description
+ "Particular configuration to validate.";
+
+ choice config-source {
+ mandatory true;
+ description
+ "The configuration source to validate.";
+
+ leaf candidate {
+ if-feature candidate;
+ type empty;
+ description
+ "The candidate configuration is the config source.";
+ }
+ leaf running {
+ type empty;
+ description
+ "The running configuration is the config source.";
+ }
+ leaf startup {
+ if-feature startup;
+ type empty;
+ description
+ "The startup configuration is the config source.";
+ }
+ leaf url {
+ if-feature url;
+ type inet:uri;
+ description
+ "The URL-based configuration is the config source.";
+ }
+ anyxml config {
+ description
+ "Inline Config content: <config> element. Represents
+ an entire configuration datastore, not
+ a subset of the running datastore.";
+ }
+ }
+ }
+ }
+ }
+
+}
diff --git a/tests/modules/yang/ietf-origin@2018-02-14.yang b/tests/modules/yang/ietf-origin@2018-02-14.yang
new file mode 100644
index 0000000..3080c91
--- /dev/null
+++ b/tests/modules/yang/ietf-origin@2018-02-14.yang
@@ -0,0 +1,147 @@
+module ietf-origin {
+ yang-version 1.1;
+ namespace "urn:ietf:params:xml:ns:yang:ietf-origin";
+ prefix or;
+
+ import ietf-yang-metadata {
+ prefix md;
+ }
+
+ organization
+ "IETF Network Modeling (NETMOD) Working Group";
+
+ contact
+ "WG Web: <https://datatracker.ietf.org/wg/netmod/>
+
+ WG List: <mailto:netmod@ietf.org>
+
+ Author: Martin Bjorklund
+ <mailto:mbj@tail-f.com>
+
+ Author: Juergen Schoenwaelder
+ <mailto:j.schoenwaelder@jacobs-university.de>
+
+ Author: Phil Shafer
+ <mailto:phil@juniper.net>
+
+ Author: Kent Watsen
+ <mailto:kwatsen@juniper.net>
+
+ Author: Rob Wilton
+ <rwilton@cisco.com>";
+
+ description
+ "This YANG module defines an 'origin' metadata annotation and a
+ set of identities for the origin value.
+
+ Copyright (c) 2018 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject to
+ the license terms contained in, the Simplified BSD License set
+ forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (https://trustee.ietf.org/license-info).
+
+ This version of this YANG module is part of RFC 8342
+ (https://www.rfc-editor.org/info/rfc8342); see the RFC itself
+ for full legal notices.";
+
+ revision 2018-02-14 {
+ description
+ "Initial revision.";
+ reference
+ "RFC 8342: Network Management Datastore Architecture (NMDA)";
+ }
+
+ /*
+ * Identities
+ */
+
+ identity origin {
+ description
+ "Abstract base identity for the origin annotation.";
+ }
+
+ identity intended {
+ base origin;
+ description
+ "Denotes configuration from the intended configuration
+ datastore.";
+ }
+
+ identity dynamic {
+ base origin;
+ description
+ "Denotes configuration from a dynamic configuration
+ datastore.";
+ }
+
+ identity system {
+ base origin;
+ description
+ "Denotes configuration originated by the system itself.
+
+ Examples of system configuration include applied configuration
+ for an always-existing loopback interface, or interface
+ configuration that is auto-created due to the hardware
+ currently present in the device.";
+ }
+
+ identity learned {
+ base origin;
+ description
+ "Denotes configuration learned from protocol interactions with
+ other devices, instead of via either the intended
+ configuration datastore or any dynamic configuration
+ datastore.
+
+ Examples of protocols that provide learned configuration
+ include link-layer negotiations, routing protocols, and
+ DHCP.";
+ }
+
+ identity default {
+ base origin;
+ description
+ "Denotes configuration that does not have a configured or
+ learned value but has a default value in use. Covers both
+ values defined in a 'default' statement and values defined
+ via an explanation in a 'description' statement.";
+ }
+
+ identity unknown {
+ base origin;
+ description
+ "Denotes configuration for which the system cannot identify the
+ origin.";
+ }
+
+ /*
+ * Type definitions
+ */
+
+ typedef origin-ref {
+ type identityref {
+ base origin;
+ }
+ description
+ "An origin identity reference.";
+ }
+
+ /*
+ * Metadata annotations
+ */
+
+ md:annotation origin {
+ type origin-ref;
+ description
+ "The 'origin' annotation can be present on any configuration
+ data node in the operational state datastore. It specifies
+ from where the node originated. If not specified for a given
+ configuration data node, then the origin is the same as the
+ origin of its parent node in the data tree. The origin for
+ any top-level configuration data nodes must be specified.";
+ }
+}
diff --git a/tests/modules/yang/ietf-restconf@2017-01-26.yang b/tests/modules/yang/ietf-restconf@2017-01-26.yang
new file mode 100644
index 0000000..b47455b
--- /dev/null
+++ b/tests/modules/yang/ietf-restconf@2017-01-26.yang
@@ -0,0 +1,278 @@
+module ietf-restconf {
+ yang-version 1.1;
+ namespace "urn:ietf:params:xml:ns:yang:ietf-restconf";
+ prefix "rc";
+
+ organization
+ "IETF NETCONF (Network Configuration) Working Group";
+
+ contact
+ "WG Web: <https://datatracker.ietf.org/wg/netconf/>
+ WG List: <mailto:netconf@ietf.org>
+
+ Author: Andy Bierman
+ <mailto:andy@yumaworks.com>
+
+ Author: Martin Bjorklund
+ <mailto:mbj@tail-f.com>
+
+ Author: Kent Watsen
+ <mailto:kwatsen@juniper.net>";
+
+ description
+ "This module contains conceptual YANG specifications
+ for basic RESTCONF media type definitions used in
+ RESTCONF protocol messages.
+
+ Note that the YANG definitions within this module do not
+ represent configuration data of any kind.
+ The 'restconf-media-type' YANG extension statement
+ provides a normative syntax for XML and JSON
+ message-encoding purposes.
+
+ Copyright (c) 2017 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or
+ without modification, is permitted pursuant to, and subject
+ to the license terms contained in, the Simplified BSD License
+ set forth in Section 4.c of the IETF Trust's Legal Provisions
+ Relating to IETF Documents
+ (http://trustee.ietf.org/license-info).
+
+ This version of this YANG module is part of RFC 8040; see
+ the RFC itself for full legal notices.";
+
+ revision 2017-01-26 {
+ description
+ "Initial revision.";
+ reference
+ "RFC 8040: RESTCONF Protocol.";
+ }
+
+ extension yang-data {
+ argument name {
+ yin-element true;
+ }
+ description
+ "This extension is used to specify a YANG data template that
+ represents conceptual data defined in YANG. It is
+ intended to describe hierarchical data independent of
+ protocol context or specific message-encoding format.
+ Data definition statements within a yang-data extension
+ specify the generic syntax for the specific YANG data
+ template, whose name is the argument of the 'yang-data'
+ extension statement.
+
+ Note that this extension does not define a media type.
+ A specification using this extension MUST specify the
+ message-encoding rules, including the content media type.
+
+ The mandatory 'name' parameter value identifies the YANG
+ data template that is being defined. It contains the
+ template name.
+
+ This extension is ignored unless it appears as a top-level
+ statement. It MUST contain data definition statements
+ that result in exactly one container data node definition.
+ An instance of a YANG data template can thus be translated
+ into an XML instance document, whose top-level element
+ corresponds to the top-level container.
+ The module name and namespace values for the YANG module using
+ the extension statement are assigned to instance document data
+ conforming to the data definition statements within
+ this extension.
+
+ The substatements of this extension MUST follow the
+ 'data-def-stmt' rule in the YANG ABNF.
+
+ The XPath document root is the extension statement itself,
+ such that the child nodes of the document root are
+ represented by the data-def-stmt substatements within
+ this extension. This conceptual document is the context
+ for the following YANG statements:
+
+ - must-stmt
+ - when-stmt
+ - path-stmt
+ - min-elements-stmt
+ - max-elements-stmt
+ - mandatory-stmt
+ - unique-stmt
+ - ordered-by
+ - instance-identifier data type
+
+ The following data-def-stmt substatements are constrained
+ when used within a 'yang-data' extension statement.
+
+ - The list-stmt is not required to have a key-stmt defined.
+ - The if-feature-stmt is ignored if present.
+ - The config-stmt is ignored if present.
+ - The available identity values for any 'identityref'
+ leaf or leaf-list nodes are limited to the module
+ containing this extension statement and the modules
+ imported into that module.
+ ";
+ }
+
+ rc:yang-data yang-errors {
+ uses errors;
+ }
+
+ rc:yang-data yang-api {
+ uses restconf;
+ }
+
+ grouping errors {
+ description
+ "A grouping that contains a YANG container
+ representing the syntax and semantics of a
+ YANG Patch error report within a response message.";
+
+ container errors {
+ description
+ "Represents an error report returned by the server if
+ a request results in an error.";
+
+ list error {
+ description
+ "An entry containing information about one
+ specific error that occurred while processing
+ a RESTCONF request.";
+ reference
+ "RFC 6241, Section 4.3.";
+
+ leaf error-type {
+ type enumeration {
+ enum transport {
+ description
+ "The transport layer.";
+ }
+ enum rpc {
+ description
+ "The rpc or notification layer.";
+ }
+ enum protocol {
+ description
+ "The protocol operation layer.";
+ }
+ enum application {
+ description
+ "The server application layer.";
+ }
+ }
+ mandatory true;
+ description
+ "The protocol layer where the error occurred.";
+ }
+
+ leaf error-tag {
+ type string;
+ mandatory true;
+ description
+ "The enumerated error-tag.";
+ }
+
+ leaf error-app-tag {
+ type string;
+ description
+ "The application-specific error-tag.";
+ }
+
+ leaf error-path {
+ type instance-identifier;
+ description
+ "The YANG instance identifier associated
+ with the error node.";
+ }
+
+ leaf error-message {
+ type string;
+ description
+ "A message describing the error.";
+ }
+
+ anydata error-info {
+ description
+ "This anydata value MUST represent a container with
+ zero or more data nodes representing additional
+ error information.";
+ }
+ }
+ }
+ }
+
+ grouping restconf {
+ description
+ "Conceptual grouping representing the RESTCONF
+ root resource.";
+
+ container restconf {
+ description
+ "Conceptual container representing the RESTCONF
+ root resource.";
+
+ container data {
+ description
+ "Container representing the datastore resource.
+ Represents the conceptual root of all state data
+ and configuration data supported by the server.
+ The child nodes of this container can be any data
+ resources that are defined as top-level data nodes
+ from the YANG modules advertised by the server in
+ the 'ietf-yang-library' module.";
+ }
+
+ container operations {
+ description
+ "Container for all operation resources.
+
+ Each resource is represented as an empty leaf with the
+ name of the RPC operation from the YANG 'rpc' statement.
+
+ For example, the 'system-restart' RPC operation defined
+ in the 'ietf-system' module would be represented as
+ an empty leaf in the 'ietf-system' namespace. This is
+ a conceptual leaf and will not actually be found in
+ the module:
+
+ module ietf-system {
+ leaf system-reset {
+ type empty;
+ }
+ }
+
+ To invoke the 'system-restart' RPC operation:
+
+ POST /restconf/operations/ietf-system:system-restart
+
+ To discover the RPC operations supported by the server:
+
+ GET /restconf/operations
+
+ In XML, the YANG module namespace identifies the module:
+
+ <system-restart
+ xmlns='urn:ietf:params:xml:ns:yang:ietf-system'/>
+
+ In JSON, the YANG module name identifies the module:
+
+ { 'ietf-system:system-restart' : [null] }
+ ";
+ }
+ leaf yang-library-version {
+ type string {
+ pattern '\d{4}-\d{2}-\d{2}';
+ }
+ config false;
+ mandatory true;
+ description
+ "Identifies the revision date of the 'ietf-yang-library'
+ module that is implemented by this RESTCONF server.
+ Indicates the year, month, and day in YYYY-MM-DD
+ numeric format.";
+ }
+ }
+ }
+
+}
diff --git a/tests/modules/yang/notifications@2008-07-14.yang b/tests/modules/yang/notifications@2008-07-14.yang
new file mode 100644
index 0000000..b696f39
--- /dev/null
+++ b/tests/modules/yang/notifications@2008-07-14.yang
@@ -0,0 +1,95 @@
+module notifications {
+
+ namespace "urn:ietf:params:xml:ns:netconf:notification:1.0";
+ prefix "ncEvent";
+
+ import ietf-yang-types { prefix yang; }
+
+ organization
+ "IETF NETCONF WG";
+
+ contact
+ "netconf@ops.ietf.org";
+
+ description
+ "Conversion of the 'ncEvent' XSD in the
+ NETCONF Notifications RFC.";
+
+ reference
+ "RFC 5277.";
+
+ revision 2008-07-14 {
+ description "RFC 5277 version.";
+ }
+
+ typedef streamNameType {
+ description
+ "The name of an event stream.";
+ type string;
+ }
+
+ rpc create-subscription {
+ description
+ "The command to create a notification subscription. It
+ takes as argument the name of the notification stream
+ and filter. Both of those options limit the content of
+ the subscription. In addition, there are two time-related
+ parameters, startTime and stopTime, which can be used to
+ select the time interval of interest to the notification
+ replay feature.";
+
+ input {
+ leaf stream {
+ description
+ "An optional parameter that indicates which stream of events
+ is of interest. If not present, then events in the default
+ NETCONF stream will be sent.";
+ type streamNameType;
+ default "NETCONF";
+ }
+
+ anyxml filter {
+ description
+ "An optional parameter that indicates which subset of all
+ possible events is of interest. The format of this
+ parameter is the same as that of the filter parameter
+ in the NETCONF protocol operations. If not present,
+ all events not precluded by other parameters will
+ be sent.";
+ }
+
+ leaf startTime {
+ description
+ "A parameter used to trigger the replay feature and
+ indicates that the replay should start at the time
+ specified. If start time is not present, this is not a
+ replay subscription.";
+ type yang:date-and-time;
+ }
+
+ leaf stopTime {
+ // must ". >= ../startTime";
+ description
+ "An optional parameter used with the optional replay
+ feature to indicate the newest notifications of
+ interest. If stop time is not present, the notifications
+ will continue until the subscription is terminated.
+ Must be used with startTime.";
+ type yang:date-and-time;
+ }
+ }
+ }
+
+ /*container notification {
+ description "internal struct to start a notification";
+ config false;
+
+ leaf eventTime {
+ mandatory true;
+ type yang:date-and-time;
+ }
+
+ // eventType and any data content goes here
+ }*/
+}
+
diff --git a/tests/modules/yang/sm-extension.yang b/tests/modules/yang/sm-extension.yang
new file mode 100644
index 0000000..63d164a
--- /dev/null
+++ b/tests/modules/yang/sm-extension.yang
@@ -0,0 +1,17 @@
+module sm-extension {
+ yang-version 1.1;
+ namespace "urn:sm-ext";
+ prefix "sm-ext";
+
+ list tlist {
+ key "name";
+ leaf name {
+ type uint32;
+ }
+ }
+ container tcont {
+ leaf tleaf {
+ type uint32;
+ }
+ }
+}
diff --git a/tests/modules/yang/sm-mod.yang b/tests/modules/yang/sm-mod.yang
new file mode 100644
index 0000000..8ac834e
--- /dev/null
+++ b/tests/modules/yang/sm-mod.yang
@@ -0,0 +1,9 @@
+module sm-mod {
+ yang-version 1.1;
+ namespace "urn:sm-mod";
+ prefix "sm-mod";
+
+ import sm-modp {
+ prefix smp;
+ }
+}
diff --git a/tests/modules/yang/sm-modp.yang b/tests/modules/yang/sm-modp.yang
new file mode 100644
index 0000000..33f45b4
--- /dev/null
+++ b/tests/modules/yang/sm-modp.yang
@@ -0,0 +1,24 @@
+module sm-modp {
+ yang-version 1.1;
+ namespace "urn:sm-modp";
+ prefix "sm-modp";
+
+ import ietf-yang-schema-mount {
+ prefix yangmnt;
+ }
+
+ revision 2017-01-26;
+
+ container ncmp {
+ yangmnt:mount-point "root";
+ }
+
+ container not-compiled {
+ leaf first {
+ type string;
+ }
+ leaf second {
+ type string;
+ }
+ }
+}
diff --git a/tests/modules/yang/sm-rpcnotif.yang b/tests/modules/yang/sm-rpcnotif.yang
new file mode 100644
index 0000000..fda5442
--- /dev/null
+++ b/tests/modules/yang/sm-rpcnotif.yang
@@ -0,0 +1,25 @@
+module sm-rpcnotif {
+ yang-version 1.1;
+ namespace "urn:rpcnotif";
+ prefix "smrn";
+
+ container cont {
+ notification cn;
+ action cr {
+ input {
+ leaf in {
+ type string;
+ }
+ }
+ output {
+ leaf out {
+ type string;
+ }
+ }
+ }
+ }
+ rpc r1;
+ rpc r2;
+ notification n1;
+ notification n2;
+}
diff --git a/tests/modules/yang/sm.yang b/tests/modules/yang/sm.yang
new file mode 100644
index 0000000..3da9c9a
--- /dev/null
+++ b/tests/modules/yang/sm.yang
@@ -0,0 +1,39 @@
+module sm {
+ yang-version 1.1;
+ namespace "urn:sm";
+ prefix "sm";
+
+ import ietf-yang-schema-mount {
+ prefix yangmnt;
+ }
+ import ietf-interfaces {
+ prefix if;
+ }
+
+ container root {
+ yangmnt:mount-point "root";
+ }
+ container root2 {
+ yangmnt:mount-point "root";
+ }
+ container root3 {
+ list ls {
+ key name;
+ leaf name {
+ type string;
+ }
+ yangmnt:mount-point "mnt-root";
+ }
+ }
+ leaf target {
+ type string;
+ }
+
+ augment /if:interfaces/if:interface {
+ leaf sm-name {
+ type leafref {
+ path "/sm:target";
+ }
+ }
+ }
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 22:30:28 +0000