From 75808db17caf8b960b351e3408e74142f4c85aac Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 14 Apr 2024 15:42:30 +0200 Subject: Adding upstream version 2.117.0. Signed-off-by: Daniel Baumann --- .../manual/acute-accent/build-spec/debian/manpages | 1 + .../manual/acute-accent/build-spec/fill-values | 3 + .../build-spec/orig/man/hosts_access.5 | 405 +++++++++++++++++++++ .../documentation/manual/acute-accent/eval/desc | 3 + .../documentation/manual/acute-accent/eval/hints | 34 ++ 5 files changed, 446 insertions(+) create mode 100644 t/recipes/checks/documentation/manual/acute-accent/build-spec/debian/manpages create mode 100644 t/recipes/checks/documentation/manual/acute-accent/build-spec/fill-values create mode 100644 t/recipes/checks/documentation/manual/acute-accent/build-spec/orig/man/hosts_access.5 create mode 100644 t/recipes/checks/documentation/manual/acute-accent/eval/desc create mode 100644 t/recipes/checks/documentation/manual/acute-accent/eval/hints (limited to 't/recipes/checks/documentation/manual/acute-accent') diff --git a/t/recipes/checks/documentation/manual/acute-accent/build-spec/debian/manpages b/t/recipes/checks/documentation/manual/acute-accent/build-spec/debian/manpages new file mode 100644 index 0000000..85c5e00 --- /dev/null +++ b/t/recipes/checks/documentation/manual/acute-accent/build-spec/debian/manpages @@ -0,0 +1 @@ +man/* diff --git a/t/recipes/checks/documentation/manual/acute-accent/build-spec/fill-values b/t/recipes/checks/documentation/manual/acute-accent/build-spec/fill-values new file mode 100644 index 0000000..63bead0 --- /dev/null +++ b/t/recipes/checks/documentation/manual/acute-accent/build-spec/fill-values @@ -0,0 +1,3 @@ +Testname: acute-accent +Skeleton: upload-native +Description: Generates an acute accent instead of an apostrophe or single closing quote diff --git a/t/recipes/checks/documentation/manual/acute-accent/build-spec/orig/man/hosts_access.5 b/t/recipes/checks/documentation/manual/acute-accent/build-spec/orig/man/hosts_access.5 new file mode 100644 index 0000000..044d0e0 --- /dev/null +++ b/t/recipes/checks/documentation/manual/acute-accent/build-spec/orig/man/hosts_access.5 @@ -0,0 +1,405 @@ +.TH HOSTS_ACCESS 5 +.SH NAME +hosts_access \- format of host access control files +.SH DESCRIPTION +This manual page describes a simple access control language that is +based on client (host name/address, user name), and server (process +name, host name/address) patterns. Examples are given at the end. The +impatient reader is encouraged to skip to the EXAMPLES section for a +quick introduction. +.PP +The extended version of the access control language is described in the +\fIhosts_options\fR(5) document. \fBNote that this language supersedes +the meaning of \fIshell_command\fB as documented below.\fR +.PP +In the following text, \fIdaemon\fR is the process name of a +network daemon process, and \fIclient\fR is the name and/or address of +a host requesting service. Network daemon process names are specified +in the inetd configuration file. +.SH ACCESS CONTROL FILES +The access control software consults two files. The search stops +at the first match: +.IP \(bu +Access will be granted when a (daemon,client) pair matches an entry in +the \fI/etc/hosts.allow\fR file. +.IP \(bu +Otherwise, access will be denied when a (daemon,client) pair matches an +entry in the \fI/etc/hosts.deny\fR file. +.IP \(bu +Otherwise, access will be granted. +.PP +A non-existing access control file is treated as if it were an empty +file. Thus, access control can be turned off by providing no access +control files. +.SH ACCESS CONTROL RULES +Each access control file consists of zero or more lines of text. These +lines are processed in order of appearance. The search terminates when a +match is found. +.IP \(bu +A newline character is ignored when it is preceded by a backslash +character. This permits you to break up long lines so that they are +easier to edit. +.IP \(bu +Blank lines or lines that begin with a `#\' character are ignored. +This permits you to insert comments and whitespace so that the tables +are easier to read. +.IP \(bu +All other lines should satisfy the following format, things between [] +being optional: +.sp +.ti +3 +daemon_list : client_list [ : shell_command ] +.PP +\fIdaemon_list\fR is a list of one or more daemon process names +(argv[0] values) or server port numbers or wildcards (see below). +.PP +\fIclient_list\fR is a list +of one or more host names, host addresses, patterns or wildcards (see +below) that will be matched against the client host name or address. +.PP +The more complex forms \fIdaemon@host\fR and \fIuser@host\fR are +explained in the sections on server endpoint patterns and on client +username lookups, respectively. +.PP +List elements should be separated by blanks and/or commas. +.PP +With the exception of NIS (YP) netgroup lookups, all access control +checks are case insensitive. +.ne 4 +.SH PATTERNS +The access control language implements the following patterns: +.IP \(bu +A string that begins with a `.\' character. A host name is matched if +the last components of its name match the specified pattern. For +example, the pattern `.tue.nl\' matches the host name +`wzv.win.tue.nl\'. +.IP \(bu +A string that ends with a `.\' character. A host address is matched if +its first numeric fields match the given string. For example, the +pattern `131.155.\' matches the address of (almost) every host on the +Eind\%hoven University network (131.155.x.x). +.IP \(bu +A string that begins with an `@\' character is treated as an NIS +(formerly YP) netgroup name. A host name is matched if it is a host +member of the specified netgroup. Netgroup matches are not supported +for daemon process names or for client user names. +.IP \(bu +An expression of the form `n.n.n.n/m.m.m.m\' is interpreted as a +`net/mask\' pair. An IPv4 host address is matched if `net\' is equal to the +bitwise AND of the address and the `mask\'. For example, the net/mask +pattern `131.155.72.0/255.255.254.0\' matches every address in the +range `131.155.72.0\' through `131.155.73.255\'. +`255.255.255.255\' is not a valid mask value, so a single host can be +matched just by its IP. +.IP \(bu +An expression of the form `n.n.n.n/mm' is interpreted as a +`net/masklength' pair, where `mm' is the number of consecutive `1' +bits in the netmask applied to the `n.n.n.n' address. +.IP \(bu +An expression of the form `[n:n:n:n:n:n:n:n]/m\' is interpreted as a +`[net]/prefixlen\' pair. An IPv6 host address is matched if +`prefixlen\' bits of `net\' is equal to the `prefixlen\' bits of the +address. For example, the [net]/prefixlen pattern +`[3ffe:505:2:1::]/64\' matches every address in the range +`3ffe:505:2:1::\' through `3ffe:505:2:1:ffff:ffff:ffff:ffff\'. +.IP \(bu +A string that begins with a `/\' character is treated as a file +name. A host name or address is matched if it matches any host name +or address pattern listed in the named file. The file format is +zero or more lines with zero or more host name or address patterns +separated by whitespace. A file name pattern can be used anywhere +a host name or address pattern can be used. +.IP \(bu +Wildcards `*\' and `?\' can be used to match hostnames or IP addresses. This +method of matching cannot be used in conjunction with `net/mask\' matching, +hostname matching beginning with `.\' or IP address matching ending with `.\'. +.SH WILDCARDS +The access control language supports explicit wildcards: +.IP ALL +The universal wildcard, always matches. +.IP LOCAL +Matches any host whose name does not contain a dot character. +.IP UNKNOWN +Matches any user whose name is unknown, and matches any host whose name +\fIor\fR address are unknown. This pattern should be used with care: +host names may be unavailable due to temporary name server problems. A +network address will be unavailable when the software cannot figure out +what type of network it is talking to. +.IP KNOWN +Matches any user whose name is known, and matches any host whose name +\fIand\fR address are known. This pattern should be used with care: +host names may be unavailable due to temporary name server problems. A +network address will be unavailable when the software cannot figure out +what type of network it is talking to. +.IP PARANOID +Matches any host whose name does not match its address. When tcpd is +built with -DPARANOID (default mode), it drops requests from such +clients even before looking at the access control tables. Build +without -DPARANOID when you want more control over such requests. +.ne 6 +.SH OPERATORS +.IP EXCEPT +Intended use is of the form: `list_1 EXCEPT list_2\'; this construct +matches anything that matches \fIlist_1\fR unless it matches +\fIlist_2\fR. The EXCEPT operator can be used in daemon_lists and in +client_lists. The EXCEPT operator can be nested: if the control +language would permit the use of parentheses, `a EXCEPT b EXCEPT c\' +would parse as `(a EXCEPT (b EXCEPT c))\'. +.br +.ne 6 +.SH SHELL COMMANDS +If the first-matched access control rule contains a shell command, that +command is subjected to % substitutions (see next section). +The result is executed by a \fI/bin/sh\fR child process with standard +input, output and error connected to \fI/dev/null\fR. Specify an `&\' +at the end of the command if you do not want to wait until it has +completed. +.PP +Shell commands should not rely on the PATH setting of the inetd. +Instead, they should use absolute path names, or they should begin with +an explicit PATH=whatever statement. +.PP +The \fIhosts_options\fR(5) document describes an alternative language +that uses the shell command field in a different and incompatible way. +.SH % EXPANSIONS +The following expansions are available within shell commands: +.IP "%a (%A)" +The client (server) host address. +.IP %c +Client information: user@host, user@address, a host name, or just an +address, depending on how much information is available. +.IP %d +The daemon process name (argv[0] value). +.IP "%h (%H)" +The client (server) host name or address, if the host name is +unavailable. +.IP "%n (%N)" +The client (server) host name (or "unknown" or "paranoid"). +.IP "%r (%R)" +The clients (servers) port number (or "0"). +.IP %p +The daemon process id. +.IP %s +Server information: daemon@host, daemon@address, or just a daemon name, +depending on how much information is available. +.IP %u +The client user name (or "unknown"). +.IP %% +Expands to a single `%\' character. +.PP +Characters in % expansions that may confuse the shell are replaced by +underscores. +.SH SERVER ENDPOINT PATTERNS +In order to distinguish clients by the network address that they +connect to, use patterns of the form: +.sp +.ti +3 +process_name@host_pattern : client_list ... +.sp +Patterns like these can be used when the machine has different internet +addresses with different internet hostnames. Service providers can use +this facility to offer FTP, GOPHER or WWW archives with internet names +that may even belong to different organizations. See also the `twist\' +option in the hosts_options(5) document. Some systems (Solaris, +FreeBSD) can have more than one internet address on one physical +interface; with other systems you may have to resort to SLIP or PPP +pseudo interfaces that live in a dedicated network address space. +.sp +The host_pattern obeys the same syntax rules as host names and +addresses in client_list context. Usually, server endpoint information +is available only with connection-oriented services. +.SH CLIENT USERNAME LOOKUP +When the client host supports the RFC 931 protocol or one of its +descendants (TAP, IDENT, RFC 1413) the wrapper programs can retrieve +additional information about the owner of a connection. Client username +information, when available, is logged together with the client host +name, and can be used to match patterns like: +.PP +.ti +3 +daemon_list : ... user_pattern@host_pattern ... +.PP +The daemon wrappers can be configured at compile time to perform +rule-driven username lookups (default) or to always interrogate the +client host. In the case of rule-driven username lookups, the above +rule would cause username lookup only when both the \fIdaemon_list\fR +and the \fIhost_pattern\fR match. +.PP +A user pattern has the same syntax as a daemon process pattern, so the +same wildcards apply (netgroup membership is not supported). One +should not get carried away with username lookups, though. +.IP \(bu +The client username information cannot be trusted when it is needed +most, i.e. when the client system has been compromised. In general, +ALL and (UN)KNOWN are the only user name patterns that make sense. +.IP \(bu +Username lookups are possible only with TCP-based services, and only +when the client host runs a suitable daemon; in all other cases the +result is "unknown". +.IP \(bu +A well-known UNIX kernel bug may cause loss of service when username +lookups are blocked by a firewall. The wrapper README document +describes a procedure to find out if your kernel has this bug. +.IP \(bu +Username lookups may cause noticeable delays for non-UNIX users. The +default timeout for username lookups is 10 seconds: too short to cope +with slow networks, but long enough to irritate PC users. +.PP +Selective username lookups can alleviate the last problem. For example, +a rule like: +.PP +.ti +3 +daemon_list : @pcnetgroup ALL@ALL +.PP +would match members of the pc netgroup without doing username lookups, +but would perform username lookups with all other systems. +.SH DETECTING ADDRESS SPOOFING ATTACKS +A flaw in the sequence number generator of many TCP/IP implementations +allows intruders to easily impersonate trusted hosts and to break in +via, for example, the remote shell service. The IDENT (RFC931 etc.) +service can be used to detect such and other host address spoofing +attacks. +.PP +Before accepting a client request, the wrappers can use the IDENT +service to find out that the client did not send the request at all. +When the client host provides IDENT service, a negative IDENT lookup +result (the client matches `UNKNOWN@host\') is strong evidence of a host +spoofing attack. +.PP +A positive IDENT lookup result (the client matches `KNOWN@host\') is +less trustworthy. It is possible for an intruder to spoof both the +client connection and the IDENT lookup, although doing so is much +harder than spoofing just a client connection. It may also be that +the client\'s IDENT server is lying. +.PP +Note: IDENT lookups don\'t work with UDP services. +.SH EXAMPLES +The language is flexible enough that different types of access control +policy can be expressed with a minimum of fuss. Although the language +uses two access control tables, the most common policies can be +implemented with one of the tables being trivial or even empty. +.PP +When reading the examples below it is important to realize that the +allow table is scanned before the deny table, that the search +terminates when a match is found, and that access is granted when no +match is found at all. +.PP +The examples use host and domain names. They can be improved by +including address and/or network/netmask information, to reduce the +impact of temporary name server lookup failures. +.SH MOSTLY CLOSED +In this case, access is denied by default. Only explicitly authorized +hosts are permitted access. +.PP +The default policy (no access) is implemented with a trivial deny +file: +.PP +.ne 2 +/etc/hosts.deny: +.in +3 +ALL: ALL +.PP +This denies all service to all hosts, unless they are permitted access +by entries in the allow file. +.PP +The explicitly authorized hosts are listed in the allow file. +For example: +.PP +.ne 2 +/etc/hosts.allow: +.in +3 +ALL: LOCAL @some_netgroup +.br +ALL: .foobar.edu EXCEPT terminalserver.foobar.edu +.PP +The first rule permits access from hosts in the local domain (no `.\' +in the host name) and from members of the \fIsome_netgroup\fP +netgroup. The second rule permits access from all hosts in the +\fIfoobar.edu\fP domain (notice the leading dot), with the exception of +\fIterminalserver.foobar.edu\fP. +.SH MOSTLY OPEN +Here, access is granted by default; only explicitly specified hosts are +refused service. +.PP +The default policy (access granted) makes the allow file redundant so +that it can be omitted. The explicitly non-authorized hosts are listed +in the deny file. For example: +.PP +/etc/hosts.deny: +.in +3 +ALL: some.host.name, .some.domain +.br +ALL EXCEPT in.fingerd: other.host.name, .other.domain +.PP +The first rule denies some hosts and domains all services; the second +rule still permits finger requests from other hosts and domains. +.SH BOOBY TRAPS +The next example permits tftp requests from hosts in the local domain +(notice the leading dot). Requests from any other hosts are denied. +Instead of the requested file, a finger probe is sent to the offending +host. The result is mailed to the superuser. +.PP +.ne 2 +/etc/hosts.allow: +.in +3 +.nf +in.tftpd: LOCAL, .my.domain +.PP +.ne 2 +/etc/hosts.deny: +.in +3 +.nf +in.tftpd: ALL: (/usr/sbin/safe_finger -l @%h | \\ + /usr/bin/mail -s %d-%h root) & +.fi +.PP +The safe_finger command comes with the tcpd wrapper and should be +installed in a suitable place. It limits possible damage from data sent +by the remote finger server. It gives better protection than the +standard finger command. +.PP +The expansion of the %h (client host) and %d (service name) sequences +is described in the section on shell commands. +.PP +Warning: do not booby-trap your finger daemon, unless you are prepared +for infinite finger loops. +.PP +On network firewall systems this trick can be carried even further. +The typical network firewall only provides a limited set of services to +the outer world. All other services can be "bugged" just like the above +tftp example. The result is an excellent early-warning system. +.br +.ne 4 +.SH DIAGNOSTICS +An error is reported when a syntax error is found in a host access +control rule; when the length of an access control rule exceeds the +capacity of an internal buffer; when an access control rule is not +terminated by a newline character; when the result of % +expansion would overflow an internal buffer; when a system call fails +that shouldn\'t. All problems are reported via the syslog daemon. +.SH FILES +.na +.nf +/etc/hosts.allow, (daemon,client) pairs that are granted access. +/etc/hosts.deny, (daemon,client) pairs that are denied access. +.ad +.fi +.SH SEE ALSO +.nf +hosts_options(5) extended syntax. +tcpd(8) tcp/ip daemon wrapper program. +tcpdchk(8), tcpdmatch(8), test programs. +.SH BUGS +If a name server lookup times out, the host name will not be available +to the access control software, even though the host is registered. +.PP +Domain name server lookups are case insensitive; NIS (formerly YP) +netgroup lookups are case sensitive. +.SH AUTHOR +.na +.nf +Wietse Venema (wietse@wzv.win.tue.nl) +Department of Mathematics and Computing Science +Eindhoven University of Technology +Den Dolech 2, P.O. Box 513, +5600 MB Eindhoven, The Netherlands +\" @(#) hosts_access.5 1.20 95/01/30 19:51:46 diff --git a/t/recipes/checks/documentation/manual/acute-accent/eval/desc b/t/recipes/checks/documentation/manual/acute-accent/eval/desc new file mode 100644 index 0000000..411b27a --- /dev/null +++ b/t/recipes/checks/documentation/manual/acute-accent/eval/desc @@ -0,0 +1,3 @@ +Testname: acute-accent +Check: documentation/manual +See-Also: Bug#554897, Bug#507673 diff --git a/t/recipes/checks/documentation/manual/acute-accent/eval/hints b/t/recipes/checks/documentation/manual/acute-accent/eval/hints new file mode 100644 index 0000000..c292d15 --- /dev/null +++ b/t/recipes/checks/documentation/manual/acute-accent/eval/hints @@ -0,0 +1,34 @@ +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:99] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:92] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:91] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:90] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:89] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:88] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:87] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:82] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:79] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:77] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:75] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:74] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:72] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:43] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:378] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:314] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:274] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:272] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:268] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:265] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:202] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:188] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:154] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:147] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:146] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:142] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:115] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:114] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:113] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:106] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:104] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:103] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:101] +acute-accent (binary): acute-accent-in-manual-page [usr/share/man/man5/hosts_access.5.gz:100] -- cgit v1.2.3