Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

21 files changed, 1346 insertions, 0 deletions

diff --git a/Documentation/ABI/obsolete/o2cb b/Documentation/ABI/obsolete/o2cb
new file mode 100644
index 0000000000..8f39b59673
--- /dev/null
+++ b/Documentation/ABI/obsolete/o2cb
@@ -0,0 +1,11 @@
+What:		/sys/o2cb
+Date:		Dec 2005
+KernelVersion:	2.6.16
+Contact:	ocfs2-devel@lists.linux.dev
+Description:	Ocfs2-tools looks at 'interface-revision' for versioning
+		information. Each logmask/ file controls a set of debug prints
+		and can be written into with the strings "allow", "deny", or
+		"off". Reading the file returns the current state.
+		Was renamed to /sys/fs/u2cb/
+Users:		ocfs2-tools. It's sufficient to mail proposed changes to
+		ocfs2-devel@lists.linux.dev.
diff --git a/Documentation/ABI/obsolete/procfs-i8k b/Documentation/ABI/obsolete/procfs-i8k
new file mode 100644
index 0000000000..32df4d5bdd
--- /dev/null
+++ b/Documentation/ABI/obsolete/procfs-i8k
@@ -0,0 +1,10 @@
+What:		/proc/i8k
+Date:		November 2001
+KernelVersion:	2.4.14
+Contact:	Pali Rohár <pali@kernel.org>
+Description:	Legacy interface for getting/setting sensor information like
+		fan speed, temperature, serial number, hotkey status etc
+		on Dell Laptops.
+		Since the driver is now using the standard hwmon sysfs interface,
+		the procfs interface is deprecated.
+Users:		https://github.com/vitorafsr/i8kutils
diff --git a/Documentation/ABI/obsolete/sysfs-bus-iio b/Documentation/ABI/obsolete/sysfs-bus-iio
new file mode 100644
index 0000000000..b64394b0b3
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-bus-iio
@@ -0,0 +1,186 @@
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/length
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Number of scans contained by the buffer.
+
+		Since Kernel 5.11, multiple buffers are supported.
+		so, it is better to use, instead:
+
+			/sys/bus/iio/devices/iio:deviceX/bufferY/length
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/enable
+KernelVersion:	2.6.35
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Actually start the buffer capture up.  Will start trigger
+		if first device and appropriate.
+
+		Since Kernel 5.11, multiple buffers are supported.
+		so, it is better to use, instead:
+
+			/sys/bus/iio/devices/iio:deviceX/bufferY/enable
+
+What:		/sys/bus/iio/devices/iio:deviceX/scan_elements
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Directory containing interfaces for elements that will be
+		captured for a single triggered sample set in the buffer.
+
+		Since kernel 5.11 the scan_elements attributes are merged into
+		the bufferY directory, to be configurable per buffer.
+
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_en
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_en
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_en
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en
+What:		/sys/.../iio:deviceX/scan_elements/in_proximity_en
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Scan element control for triggered data capture.
+
+		Since kernel 5.11 the scan_elements attributes are merged into
+		the bufferY directory, to be configurable per buffer.
+
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_type
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_type
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_type
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_type
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_type
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_type
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type
+What:		/sys/.../iio:deviceX/scan_elements/in_proximity_type
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Description of the scan element data storage within the buffer
+		and hence the form in which it is read from user-space.
+		Form is [be|le]:[s|u]bits/storagebits[>>shift].
+		be or le specifies big or little endian. s or u specifies if
+		signed (2's complement) or unsigned. bits is the number of bits
+		of data and storagebits is the space (after padding) that it
+		occupies in the buffer. shift if specified, is the shift that
+		needs to be applied prior to masking out unused bits. Some
+		devices put their data in the middle of the transferred elements
+		with additional information on both sides.  Note that some
+		devices will have additional information in the unused bits
+		so to get a clean value, the bits value must be used to mask
+		the buffer output value appropriately.  The storagebits value
+		also specifies the data alignment.  So s48/64>>2 will be a
+		signed 48 bit integer stored in a 64 bit location aligned to
+		a 64 bit boundary. To obtain the clean value, shift right 2
+		and apply a mask to zero the top 16 bits of the result.
+		For other storage combinations this attribute will be extended
+		appropriately.
+
+		Since kernel 5.11 the scan_elements attributes are merged into
+		the bufferY directory, to be configurable per buffer.
+
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_index
+What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_index
+What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_index
+What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_index
+What:		/sys/.../iio:deviceX/scan_elements/in_pressure_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index
+What:		/sys/.../iio:deviceX/scan_elements/in_proximity_index
+KernelVersion:	2.6.37
+Description:
+		A single positive integer specifying the position of this
+		scan element in the buffer. Note these are not dependent on
+		what is enabled and may not be contiguous. Thus for user-space
+		to establish the full layout these must be used in conjunction
+		with all _en attributes to establish which channels are present,
+		and the relevant _type attributes to establish the data storage
+		format.
+
+		Since kernel 5.11 the scan_elements attributes are merged into
+		the bufferY directory, to be configurable per buffer.
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/watermark
+KernelVersion:	4.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A single positive integer specifying the maximum number of scan
+		elements to wait for.
+
+		Poll will block until the watermark is reached.
+
+		Blocking read will wait until the minimum between the requested
+		read amount or the low water mark is available.
+
+		Non-blocking read will retrieve the available samples from the
+		buffer even if there are less samples then watermark level. This
+		allows the application to block on poll with a timeout and read
+		the available samples after the timeout expires and thus have a
+		maximum delay guarantee.
+
+		Since Kernel 5.11, multiple buffers are supported.
+		so, it is better to use, instead:
+
+			/sys/bus/iio/devices/iio:deviceX/bufferY/watermark
+
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/data_available
+KernelVersion: 4.16
+Contact:	linux-iio@vger.kernel.org
+Description:
+		A read-only value indicating the bytes of data available in the
+		buffer. In the case of an output buffer, this indicates the
+		amount of empty space available to write data to. In the case of
+		an input buffer, this indicates the amount of data available for
+		reading.
+
+		Since Kernel 5.11, multiple buffers are supported.
+		so, it is better to use, instead:
+
+			/sys/bus/iio/devices/iio:deviceX/bufferY/data_available
diff --git a/Documentation/ABI/obsolete/sysfs-bus-usb b/Documentation/ABI/obsolete/sysfs-bus-usb
new file mode 100644
index 0000000000..bd096d33fb
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-bus-usb
@@ -0,0 +1,31 @@
+What:		/sys/bus/usb/devices/.../power/level
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/level.  This file holds a power-level setting for
+		the device, either "on" or "auto".
+
+		"on" means that the device is not allowed to autosuspend,
+		although normal suspends for system sleep will still
+		be honored.  "auto" means the device will autosuspend
+		and autoresume in the usual manner, according to the
+		capabilities of its driver.
+
+		During normal use, devices should be left in the "auto"
+		level.  The "on" level is meant for administrative uses.
+		If you want to suspend a device immediately but leave it
+		free to wake up in response to I/O requests, you should
+		write "0" to power/autosuspend.
+
+		Device not capable of proper suspend and resume should be
+		left in the "on" level.  Although the USB spec requires
+		devices to support suspend/resume, many of them do not.
+		In fact so many don't that by default, the USB core
+		initializes all non-hub devices in the "on" level.  Some
+		drivers may change this setting when they are bound.
+
+		This file is deprecated and will be removed after 2010.
+		Use the power/control file instead; it does exactly the
+		same thing.
diff --git a/Documentation/ABI/obsolete/sysfs-class-typec b/Documentation/ABI/obsolete/sysfs-class-typec
new file mode 100644
index 0000000000..32623514ee
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-class-typec
@@ -0,0 +1,48 @@
+These files are deprecated and will be removed. The same files are available
+under /sys/bus/typec (see Documentation/ABI/testing/sysfs-bus-typec).
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/svid
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The SVID (Standard or Vendor ID) assigned by USB-IF for this
+		alternate mode.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Every supported mode will have its own directory. The name of
+		a mode will be "mode<index>" (for example mode1), where <index>
+		is the actual index to the mode VDO returned by Discover Modes
+		USB power delivery command.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/description
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows description of the mode. The description is optional for
+		the drivers, just like with the Billboard Devices.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/vdo
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows the VDO in hexadecimal returned by Discover Modes command
+		for this mode.
+
+What:		/sys/class/typec/<port|partner|cable>/<dev>/mode<index>/active
+Date:		April 2017
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Shows if the mode is active or not. The attribute can be used
+		for entering/exiting the mode with partners and cable plugs, and
+		with the port alternate modes it can be used for disabling
+		support for specific alternate modes. Entering/exiting modes is
+		supported as synchronous operation so write(2) to the attribute
+		does not return until the enter/exit mode operation has
+		finished. The attribute is notified when the mode is
+		entered/exited so poll(2) on the attribute wakes up.
+		Entering/exiting a mode will also generate uevent KOBJ_CHANGE.
+
+		Valid values: yes, no
diff --git a/Documentation/ABI/obsolete/sysfs-cpuidle b/Documentation/ABI/obsolete/sysfs-cpuidle
new file mode 100644
index 0000000000..972cc11d34
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-cpuidle
@@ -0,0 +1,9 @@
+What:		/sys/devices/system/cpu/cpuidle/current_governor_ro
+Date:		April, 2020
+Contact:	linux-pm@vger.kernel.org
+Description:
+	current_governor_ro shows current using cpuidle governor, but read only.
+	with the update that cpuidle governor can be changed at runtime in default,
+	both current_governor and current_governor_ro co-exist under
+	/sys/devices/system/cpu/cpuidle/ file, it's duplicate so make
+	current_governor_ro obsolete.
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-arvo b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-arvo
new file mode 100644
index 0000000000..55e281b007
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-arvo
@@ -0,0 +1,53 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/actual_profile
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-5.
+		When read, this attribute returns the number of the actual
+		profile which is also the profile that's active on device startup.
+		When written this attribute activates the selected profile
+		immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/button
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The keyboard can store short macros with consist of 1 button with
+		several modifier keys internally.
+		When written, this file lets one set the sequence for a specific
+		button for a specific profile. Button and profile numbers are
+		included in written data. The data has to be 24 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/info
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns some info about the device like the
+		installed firmware version.
+		The size of the data is 8 bytes in size.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/key_mask
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The keyboard lets the user deactivate 5 certain keys like the
+		windows and application keys, to protect the user from the outcome
+		of accidentally pressing them.
+		The integer value of this attribute has bits 0-4 set depending
+		on the state of the corresponding key.
+		When read, this file returns the current state of the buttons.
+		When written, the given buttons are activated/deactivated
+		immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/mode_key
+Date:		Januar 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The keyboard has a condensed layout without num-lock key.
+		Instead it uses a mode-key which activates a gaming mode where
+		the assignment of the number block changes.
+		The integer value of this attribute ranges from 0 (OFF) to 1 (ON).
+		When read, this file returns the actual state of the key.
+		When written, the key is activated/deactivated immediately.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-isku b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-isku
new file mode 100644
index 0000000000..c601d0f2ac
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-isku
@@ -0,0 +1,153 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/actual_profile
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+		When read, this attribute returns the number of the actual
+		profile. This value is persistent, so its equivalent to the
+		profile that's active when the device is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the device activates this profile immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/info
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		The data is 6 bytes long.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/key_mask
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one deactivate certain keys like
+		windows and application keys, to prevent accidental presses.
+		Profile number for which this settings occur is included in
+		written data. The data has to be 6 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_capslock
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		capslock key for a specific profile. Profile number is included
+		in written data. The data has to be 6 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_easyzone
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		easyzone keys for a specific profile. Profile number is included
+		in written data. The data has to be 65 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_function
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		function keys for a specific profile. Profile number is included
+		in written data. The data has to be 41 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_macro
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the macro
+		keys for a specific profile. Profile number is included in
+		written data. The data has to be 35 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_media
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the media
+		keys for a specific profile. Profile number is included in
+		written data. The data has to be 29 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_thumbster
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		thumbster keys for a specific profile. Profile number is included
+		in written data. The data has to be 23 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/last_set
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the time in secs since
+		epoch in which the last configuration took place.
+		The data has to be 20 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/light
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the backlight intensity for
+		a specific profile. Profile number is included in written data.
+		The data has to be 10 bytes long for Isku, IskuFX needs	16 bytes
+		of data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/macro
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one store macros with max 500
+		keystrokes for a specific button for a specific profile.
+		Button and profile numbers are included in written data.
+		The data has to be 2083 bytes long.
+		Before reading this file, control has to be written to select
+		which profile and key to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/reset
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one reset the device.
+		The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/control
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talk
+Date:		June 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger easyshift functionality
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talkfx
+Date:		February 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger temporary color schemes
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus
new file mode 100644
index 0000000000..545e69f432
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus
@@ -0,0 +1,145 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/actual_profile
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the actual
+                profile. This value is persistent, so its equivalent to the
+                profile that's active when the mouse is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the mouse activates this profile immediately.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/startup_profile
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the actual
+                profile. This value is persistent, so its equivalent to the
+                profile that's active when the mouse is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the mouse activates this profile immediately.
+		Please use actual_profile, it does the same thing.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 121 means 1.21
+		This file is readonly.
+		Please read binary attribute info which contains firmware version.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/info
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 8 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store a macro with max 500 key/button strokes
+		internally.
+		When written, this file lets one set the sequence for a specific
+		button for a specific profile. Button and profile numbers are
+		included in written data. The data has to be 2082 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 77 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 77 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 43 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 43 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a tracking- and a distance-control-unit. These
+		can be activated/deactivated and the lift-off distance can be
+		set. The data has to be 6 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/talk
+Date:		May 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	Used to active some easy* functions of the mouse from outside.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written a calibration process for the tracking control unit
+		can be initiated/cancelled. Also lets one read/write sensor
+		registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read the mouse returns a 30x30 pixel image of the
+		sampled underground. This works only in the course of a
+		calibration process initiated with tcu.
+		The returned data is 1028 bytes in size.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-konepure b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-konepure
new file mode 100644
index 0000000000..41a9b7fbfc
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-konepure
@@ -0,0 +1,105 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/actual_profile
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. actual_profile holds number of actual profile.
+		This value is persistent, so its value determines the profile
+		that's active when the mouse is powered on next time.
+		When written, the mouse activates the set profile immediately.
+		The data has to be 3 bytes long.
+		The mouse will reject invalid data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/control
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/info
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/macro
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store a macro with max 500 key/button strokes
+		internally.
+		When written, this file lets one set the sequence for a specific
+		button for a specific profile. Button and profile numbers are
+		included in written data. The data has to be 2082 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_buttons
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 59 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_settings
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 31 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/sensor
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a tracking- and a distance-control-unit. These
+		can be activated/deactivated and the lift-off distance can be
+		set. The data has to be 6 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/talk
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	Used to active some easy* functions of the mouse from outside.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written a calibration process for the tracking control unit
+		can be initiated/cancelled. Also lets one read/write sensor
+		registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu_image
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read the mouse returns a 30x30 pixel image of the
+		sampled underground. This works only in the course of a
+		calibration process initiated with tcu.
+		The returned data is 1028 bytes in size.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus
new file mode 100644
index 0000000000..ab01631e1e
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus
@@ -0,0 +1,116 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_cpi
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-4.
+		When read, this attribute returns the number of the active
+		cpi level.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_profile
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+		When read, this attribute returns the number of the active
+		profile.
+		When written, the mouse activates this profile immediately.
+		The profile that's active when powered down is the same that's
+		active when the mouse is powered on.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-10.
+		When read, this attribute returns the number of the actual
+		sensitivity in x direction.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_y
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-10.
+		When read, this attribute returns the number of the actual
+		sensitivity in y direction.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/firmware_version
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 121 means 1.21
+		This file is readonly.
+		Obsoleted by binary sysfs attribute "info".
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/info
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_buttons
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 23 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 23 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_settings
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 16 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 16 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-lua b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-lua
new file mode 100644
index 0000000000..31c6c4c8ba
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-lua
@@ -0,0 +1,7 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/control
+Date:		October 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, cpi, button and light settings can be configured.
+		When read, actual cpi setting and sensor data are returned.
+		The data has to be 8 bytes long.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
new file mode 100644
index 0000000000..66545c587a
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra
@@ -0,0 +1,126 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_cpi
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	It is possible to switch the cpi setting of the mouse with the
+		press of a button.
+		When read, this file returns the raw number of the actual cpi
+		setting reported by the mouse. This number has to be further
+		processed to receive the real dpi value:
+
+		===== ====
+		VALUE DPI
+		===== ====
+		1     400
+		2     800
+		4     1600
+		===== ====
+
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the number of the actual profile in
+		range 0-4.
+		This file is readonly.
+		Please use binary attribute "settings" which provides this information.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 138 means 1.38
+		This file is readonly.
+		Please use binary attribute "info" which provides this information.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/info
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 19 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 19 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 13 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 13 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the settings stored in the mouse.
+		The size of the data is 3 bytes and holds information on the
+		startup_profile.
+		When written, this file lets write settings back to the mouse.
+		The data has to be 3 bytes long. The mouse will reject invalid
+		data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the profile
+                that's active when the mouse is powered on.
+		This file is readonly.
+		Please use binary attribute "settings" which provides this information.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-ryos b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-ryos
new file mode 100644
index 0000000000..1d6a8cf9dc
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-ryos
@@ -0,0 +1,178 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/control
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/profile
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. profile holds index of actual profile.
+		This value is persistent, so its value determines the profile
+		that's active when the device is powered on next time.
+		When written, the device activates the set profile immediately.
+		The data has to be 3 bytes long.
+		The device will reject invalid data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_primary
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the default of all keys for
+		a specific profile. Profile index is included in written data.
+		The data has to be 125 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_function
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		function keys for a specific profile. Profile index is included
+		in written data. The data has to be 95 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_macro
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the macro
+		keys for a specific profile. Profile index is included in
+		written data. The data has to be 35 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_thumbster
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		thumbster keys for a specific profile. Profile index is included
+		in written data. The data has to be 23 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_extra
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		capslock and function keys for a specific profile. Profile index
+		is included in written data. The data has to be 8 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_easyzone
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the function of the
+		easyzone keys for a specific profile. Profile index is included
+		in written data. The data has to be 294 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/key_mask
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one deactivate certain keys like
+		windows and application keys, to prevent accidental presses.
+		Profile index for which this settings occur is included in
+		written data. The data has to be 6 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the backlight intensity for
+		a specific profile. Profile index is included in written data.
+		This attribute is only valid for the glow and pro variant.
+		The data has to be 16 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/macro
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one store macros with max 480
+		keystrokes for a specific button for a specific profile.
+		Button and profile indexes are included in written data.
+		The data has to be 2002 bytes long.
+		Before reading this file, control has to be written to select
+		which profile and key to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/info
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		The data is 8 bytes long.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/reset
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one reset the device.
+		The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/talk
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger easyshift functionality
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light_control
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one switch between stored and custom
+		light settings.
+		This attribute is only valid for the pro variant.
+		The data has to be 8 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/stored_lights
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set per-key lighting for different
+		layers.
+		This attribute is only valid for the pro variant.
+		The data has to be 1382 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/custom_lights
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set the actual per-key lighting.
+		This attribute is only valid for the pro variant.
+		The data has to be 20 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light_macro
+Date:		October 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one set a light macro that is looped
+		whenever the device gets in dimness mode.
+		This attribute is only valid for the pro variant.
+		The data has to be 2002 bytes long.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu
new file mode 100644
index 0000000000..99fda67fce
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu
@@ -0,0 +1,77 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/buttons
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split into general settings and
+		button settings. The buttons variable holds information about
+		button layout. When written, this file lets one write the
+		respective profile buttons to the mouse. The data has to be
+		47 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/control
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/general
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split into general settings and
+		button settings. A profile holds information like resolution,
+		sensitivity and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 43 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/info
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 8 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/macro
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one store macros with max 500
+		keystrokes for a specific button for a specific profile.
+		Button and profile numbers are included in written data.
+		The data has to be 2083 bytes long.
+		Before reading this file, control has to be written to select
+		which profile and key to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/profile
+Date:		Mai 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. profile holds number of actual profile.
+		This value is persistent, so its value determines the profile
+		that's active when the mouse is powered on next time.
+		When written, the mouse activates the set profile immediately.
+		The data has to be 3 bytes long.
+		The mouse will reject invalid data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/sensor
+Date:		July 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a Avago ADNS-3090 sensor.
+		This file allows reading and writing of the mouse sensors registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net
diff --git a/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt b/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
new file mode 100644
index 0000000000..39d5659f38
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt
@@ -0,0 +1,22 @@
+These files allow sending arbitrary IPC commands to the PMC/SCU which
+may be dangerous. These will be removed eventually and should not be
+used in any new applications.
+
+What:		/sys/bus/platform/devices/INT34D2:00/simplecmd
+Date:		Jun 2015
+KernelVersion:	4.1
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	This interface allows userspace to send an arbitrary
+		IPC command to the PMC/SCU.
+
+		Format: %d %d where first number is command and
+		second number is subcommand.
+
+What:		/sys/bus/platform/devices/INT34D2:00/northpeak
+Date:		Jun 2015
+KernelVersion:	4.1
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	This interface allows userspace to enable and disable
+		Northpeak through the PMC/SCU.
+
+		Format: %u.
diff --git a/Documentation/ABI/obsolete/sysfs-firmware-acpi b/Documentation/ABI/obsolete/sysfs-firmware-acpi
new file mode 100644
index 0000000000..6715a71bec
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-firmware-acpi
@@ -0,0 +1,8 @@
+What:		/sys/firmware/acpi/hotplug/force_remove
+Date:		Mar 2017
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		Since the force_remove is inherently broken and dangerous to
+		use for some hotplugable resources like memory (because ignoring
+		the offline failure might lead to memory corruption and crashes)
+		enabling this knob is not safe and thus unsupported.
diff --git a/Documentation/ABI/obsolete/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio
new file mode 100644
index 0000000000..b8b0fd341c
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-gpio
@@ -0,0 +1,32 @@
+What:		/sys/class/gpio/
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	Linus Walleij <linusw@kernel.org>
+Description:
+
+  As a Kconfig option, individual GPIO signals may be accessed from
+  userspace.  GPIOs are only made available to userspace by an explicit
+  "export" operation.  If a given GPIO is not claimed for use by
+  kernel code, it may be exported by userspace (and unexported later).
+  Kernel code may export it for complete or partial access.
+
+  GPIOs are identified as they are inside the kernel, using integers in
+  the range 0..INT_MAX.  See Documentation/admin-guide/gpio for more information.
+
+  ::
+
+    /sys/class/gpio
+	/export ... asks the kernel to export a GPIO to userspace
+	/unexport ... to return a GPIO to the kernel
+	/gpioN ... for each exported GPIO #N OR
+	/<LINE-NAME> ... for a properly named GPIO line
+	    /value ... always readable, writes fail for input GPIOs
+	    /direction ... r/w as: in, out (default low); write: high, low
+	    /edge ... r/w as: none, falling, rising, both
+	/gpiochipN ... for each gpiochip; #N is its first GPIO
+	    /base ... (r/o) same as N
+	    /label ... (r/o) descriptive, not necessarily unique
+	    /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
+
+  This ABI is deprecated and will be removed after 2020. It is
+  replaced with the GPIO character device.
diff --git a/Documentation/ABI/obsolete/sysfs-kernel-fadump_enabled b/Documentation/ABI/obsolete/sysfs-kernel-fadump_enabled
new file mode 100644
index 0000000000..e9c2de8b36
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-kernel-fadump_enabled
@@ -0,0 +1,9 @@
+This ABI is renamed and moved to a new location /sys/kernel/fadump/enabled.
+
+What:		/sys/kernel/fadump_enabled
+Date:		Feb 2012
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read only
+		Primarily used to identify whether the FADump is enabled in
+		the kernel or not.
+User:		Kdump service
diff --git a/Documentation/ABI/obsolete/sysfs-kernel-fadump_registered b/Documentation/ABI/obsolete/sysfs-kernel-fadump_registered
new file mode 100644
index 0000000000..dae880b1a5
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-kernel-fadump_registered
@@ -0,0 +1,10 @@
+This ABI is renamed and moved to a new location /sys/kernel/fadump/registered.
+
+What:		/sys/kernel/fadump_registered
+Date:		Feb 2012
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read/write
+		Helps to control the dump collect feature from userspace.
+		Setting 1 to this file enables the system to collect the
+		dump and 0 to disable it.
+User:		Kdump service
diff --git a/Documentation/ABI/obsolete/sysfs-kernel-fadump_release_mem b/Documentation/ABI/obsolete/sysfs-kernel-fadump_release_mem
new file mode 100644
index 0000000000..ca2396edb5
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-kernel-fadump_release_mem
@@ -0,0 +1,10 @@
+This ABI is renamed and moved to a new location /sys/kernel/fadump/release_mem.
+
+What:		/sys/kernel/fadump_release_mem
+Date:		Feb 2012
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	write only
+		This is a special sysfs file and only available when
+		the system is booted to capture the vmcore using FADump.
+		It is used to release the memory reserved by FADump to
+		save the crash dump.