Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 256 insertions, 0 deletions

diff --git a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
new file mode 100644
index 0000000000..c3fec3c835
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
@@ -0,0 +1,256 @@
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/ggs*
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <jollys@xilinx.com>
+Description:
+		Read/Write PMU global general storage register value,
+		GLOBAL_GEN_STORAGE{0:3}.
+		Global general storage register that can be used
+		by system to pass information between masters.
+
+		The register is reset during system or power-on
+		resets. Three registers are used by the FSBL and
+		other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}.
+
+		Usage::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		    # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+
+		Example::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		    # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/pggs*
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <jollys@xilinx.com>
+Description:
+		Read/Write PMU persistent global general storage register
+		value, PERS_GLOB_GEN_STORAGE{0:3}.
+		Persistent global general storage register that
+		can be used by system to pass information between
+		masters.
+
+		This register is only reset by the power-on reset
+		and maintains its value through a system reset.
+		Four registers are used by the FSBL and other Xilinx
+		software products: PERS_GLOB_GEN_STORAGE{4:7}.
+		Register is reset only by a POR reset.
+
+		Usage::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		    # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+
+		Example::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		    # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <jollys@xilinx.com>
+Description:
+		This sysfs interface allows to set the shutdown scope for the
+		next shutdown request. When the next shutdown is performed, the
+		platform specific portion of PSCI-system_off can use the chosen
+		shutdown scope.
+
+		Following are available shutdown scopes(subtypes):
+
+		subsystem:
+				Only the APU along with all of its peripherals
+				not used by other processing units will be
+				shut down. This may result in the FPD power
+				domain being shut down provided that no other
+				processing unit uses FPD peripherals or DRAM.
+		ps_only:
+				The complete PS will be shut down, including the
+				RPU, PMU, etc.  Only the PL domain (FPGA)
+				remains untouched.
+		system:
+				The complete system/device is shut down.
+
+		Usage::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		    # echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+
+		Example::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		    # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/health_status
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <jollys@xilinx.com>
+Description:
+		This sysfs interface allows to set the health status. If PMUFW
+		is compiled with CHECK_HEALTHY_BOOT, it will check the healthy
+		bit on FPD WDT expiration. If healthy bit is set by a user
+		application running in Linux, PMUFW will do APU only restart. If
+		healthy bit is not set during FPD WDT expiration, PMUFW will do
+		system restart.
+
+		Usage:
+
+		Set healthy bit::
+
+		    # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+
+		Unset healthy bit::
+
+		    # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+Date:		Feb 2022
+KernelVersion:	5.18
+Contact:	"Ronak Jain" <ronak.jain@xilinx.com>
+Description:
+		This sysfs interface allows user to configure features at
+		runtime. The user can enable or disable features running at
+		firmware as well as the user can configure the parameters of
+		the features at runtime. The supported features are over
+		temperature and external watchdog. Here, the external watchdog
+		is completely different than the /dev/watchdog as the external
+		watchdog is running on the firmware and it is used to monitor
+		the health of firmware not APU(Linux). Also, the external
+		watchdog is interfaced outside of the zynqmp soc.
+
+		The supported config ids are for the feature configuration is,
+		1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
+		disable the over temperature feature.
+		2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
+		over temperature limit in Degree Celsius.
+		3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
+		the external watchdog feature.
+		4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
+		external watchdog feature.
+
+		Usage:
+
+		Select over temperature config ID to enable/disable feature
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+		Check over temperature config ID is selected or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		The expected result is 1.
+
+		Select over temperature config ID to configure OT limit
+		# echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+		Check over temperature config ID is selected or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		The expected result is 2.
+
+		Select external watchdog config ID to enable/disable feature
+		# echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+		Check external watchdog config ID is selected or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		The expected result is 3.
+
+		Select external watchdog config ID to configure time interval
+		# echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+		Check external watchdog config ID is selected or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		The expected result is 4.
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+Date:		Feb 2022
+KernelVersion:	5.18
+Contact:	"Ronak Jain" <ronak.jain@xilinx.com>
+Description:
+		This sysfs interface allows to configure features at runtime.
+		The user can enable or disable features running at firmware.
+		Also, the user can configure the parameters of the features
+		at runtime. The supported features are over temperature and
+		external watchdog. Here, the external watchdog is completely
+		different than the /dev/watchdog as the external watchdog is
+		running on the firmware and it is used to monitor the health
+		of firmware not APU(Linux). Also, the external watchdog is
+		interfaced outside of the zynqmp soc.
+
+		By default the features are disabled in the firmware. The user
+		can enable features by querying appropriate config id of the
+		features.
+
+		The default limit for the over temperature is 90 Degree Celsius.
+		The default timer interval for the external watchdog is 570ms.
+
+		The supported config ids are for the feature configuration is,
+		1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
+		disable the over temperature feature.
+		2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
+		over temperature limit in Degree Celsius.
+		3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
+		the external watchdog feature.
+		4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
+		external watchdog feature.
+
+		Usage:
+
+		Enable over temperature feature
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the over temperature feature is enabled or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 1.
+
+		Disable over temperature feature
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the over temperature feature is disabled or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 0.
+
+		Configure over temperature limit to 50 Degree Celsius
+		# echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 50 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the over temperature limit is configured or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 50.
+
+		Enable external watchdog feature
+		# echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the external watchdog feature is enabled or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 1.
+
+		Disable external watchdog feature
+		# echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the external watchdog feature is disabled or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 0.
+
+		Configure external watchdog timer interval to 500ms
+		# echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 500 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the external watchdog timer interval is configured or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 500.
+
+Users:		Xilinx