Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 54 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-driver-intc_sar b/Documentation/ABI/testing/sysfs-driver-intc_sar
new file mode 100644
index 0000000000..ec334b0e5e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-intc_sar
@@ -0,0 +1,54 @@
+What:		/sys/bus/platform/devices/INTC1092:00/intc_reg
+Date:		August 2021
+KernelVersion:	5.15
+Contact:	Shravan S <s.shravan@intel.com>,
+		An Sudhakar <sudhakar.an@intel.com>
+Description:
+		Specific Absorption Rate (SAR) regulatory mode is typically
+		derived based on information like mcc (Mobile Country Code) and
+		mnc (Mobile Network Code) that is available for the currently
+		attached LTE network. A userspace application is required to set
+		the current SAR regulatory mode on the Dynamic SAR driver using
+		this sysfs node. Such an application can also read back using
+		this sysfs node, the currently configured regulatory mode value
+		from the Dynamic SAR driver.
+
+		Acceptable regulatory modes are:
+			==	====
+			0	FCC
+			1	CE
+			2	ISED
+			==	====
+
+		- The regulatory mode value has one of the above values.
+		- The default regulatory mode used in the driver is 0.
+
+What:		/sys/bus/platform/devices/INTC1092:00/intc_data
+Date:		August 2021
+KernelVersion:	5.15
+Contact:	Shravan S <s.shravan@intel.com>,
+		An Sudhakar <sudhakar.an@intel.com>
+Description:
+		This sysfs entry is used to retrieve Dynamic SAR information
+		emitted/maintained by a BIOS that supports Dynamic SAR.
+
+		The retrieved information is in the order given below:
+		- device_mode
+		- bandtable_index
+		- antennatable_index
+		- sartable_index
+
+		The above information is sent as integer values separated
+		by a single space. This information can then be pushed to a
+		WWAN modem that uses this to control the transmit signal
+		level using the Band/Antenna/SAR table index information.
+		These parameters are derived/decided by aggregating
+		device-mode like laptop/tablet/clamshell etc. and the
+		proximity-sensor data available to the embedded controller on
+		given host. The regulatory mode configured on Dynamic SAR
+		driver also influences these values.
+
+		The userspace applications can poll for changes to this file
+		using POLLPRI event on file-descriptor (fd) obtained by opening
+		this sysfs entry. Application can then read this information from
+		the sysfs node and consume the given information.