Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 58 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-platform-wilco-ec b/Documentation/ABI/testing/sysfs-platform-wilco-ec
new file mode 100644
index 0000000000..4439d06440
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-wilco-ec
@@ -0,0 +1,58 @@
+What:		/sys/bus/platform/devices/GOOG000C\:00/boot_on_ac
+Date:		April 2019
+KernelVersion:	5.3
+Description:
+		Boot on AC is a policy which makes the device boot from S5
+		when AC power is connected. This is useful for users who
+		want to run their device headless or with a dock.
+
+		Input should be parseable by kstrtou8() to 0 or 1.
+
+What:          /sys/bus/platform/devices/GOOG000C\:00/build_date
+Date:          May 2019
+KernelVersion: 5.3
+Description:
+               Display Wilco Embedded Controller firmware build date.
+               Output will a MM/DD/YY string.
+
+What:          /sys/bus/platform/devices/GOOG000C\:00/build_revision
+Date:          May 2019
+KernelVersion: 5.3
+Description:
+               Display Wilco Embedded Controller build revision.
+               Output will a version string be similar to the example below:
+               d2592cae0
+
+What:          /sys/bus/platform/devices/GOOG000C\:00/model_number
+Date:          May 2019
+KernelVersion: 5.3
+Description:
+               Display Wilco Embedded Controller model number.
+               Output will a version string be similar to the example below:
+               08B6
+
+What:          /sys/bus/platform/devices/GOOG000C\:00/usb_charge
+Date:          October 2019
+KernelVersion: 5.5
+Description:
+               Control the USB PowerShare Policy. USB PowerShare is a policy
+               which affects charging via the special USB PowerShare port
+               (marked with a small lightning bolt or battery icon) when in
+               low power states:
+
+               - In S0, the port will always provide power.
+               - In S0ix, if usb_charge is enabled, then power will be
+                 supplied to the port when on AC or if battery is > 50%.
+                 Else no power is supplied.
+               - In S5, if usb_charge is enabled, then power will be supplied
+                 to the port when on AC. Else no power is supplied.
+
+               Input should be either "0" or "1".
+
+What:          /sys/bus/platform/devices/GOOG000C\:00/version
+Date:          May 2019
+KernelVersion: 5.3
+Description:
+               Display Wilco Embedded Controller firmware version.
+               The format of the string is x.y.z. Where x is major, y is minor
+               and z is the build number. For example: 95.00.06