Merging upstream version 6.10.3.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

22 files changed, 223 insertions, 60 deletions

diff --git a/Documentation/ABI/testing/debugfs-msi-wmi-platform b/Documentation/ABI/testing/debugfs-msi-wmi-platform
new file mode 100644
index 0000000000..71f9992168
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-msi-wmi-platform
@@ -0,0 +1,14 @@
+What:		/sys/kernel/debug/msi-wmi-platform-<wmi_device_name>/*
+Date:		April 2024
+KernelVersion:	6.10
+Contact:	Armin Wolf <W_Armin@gmx.de>
+Description:
+		This file allows to execute the associated WMI method with the same name.
+
+		To start the execution, write a  buffer containing the method arguments
+		at file offset 0. Partial writes or writes at a different offset are not
+		supported.
+
+		The buffer returned by the WMI method can then be read from the file.
+
+		See Documentation/wmi/devices/msi-wmi-platform.rst for details.
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
index 3acf7fc316..271b57c571 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
@@ -22,7 +22,7 @@ Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(RW) Used in conjunction with @addr_idx.  Specifies
 		characteristics about the address comparator being configure,
 		for example the access type, the kind of instruction to trace,
-		processor contect ID to trigger on, etc.  Individual fields in
+		processor context ID to trigger on, etc.  Individual fields in
 		the access type register may vary on the version of the trace
 		entity.
 
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
index 96aafa66b4..339cec3b2f 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
@@ -97,7 +97,7 @@ Date:		August 2023
 KernelVersion:	6.7
 Contact:	Anshuman Khandual <anshuman.khandual@arm.com>
 Description:	(Read) Shows all supported Coresight TMC-ETR buffer modes available
-		for the users to configure explicitly. This file is avaialble only
+		for the users to configure explicitly. This file is available only
 		for TMC ETR devices.
 
 What:		/sys/bus/coresight/devices/<memory_map>.tmc/buf_mode_preferred
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
index b4d0fc8d31..bf710ea6e0 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
@@ -244,7 +244,7 @@ KernelVersion	6.9
 Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
 Description:
 		(RW) Read or write the status of timestamp upon all interface.
-		Only value 0 and 1  can be written to this node. Set this node to 1 to requeset
+		Only value 0 and 1  can be written to this node. Set this node to 1 to request
 		timestamp to all trace packet.
 		Accepts only one of the 2 values -  0 or 1.
 		0 : Disable the timestamp of all trace packets.
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-events b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
index 77de58d038..e7efeab2ee 100644
--- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
@@ -37,6 +37,12 @@ Description:	Per-pmu performance monitoring events specific to the running syste
 		performance monitoring event supported by the <pmu>. The name
 		of the file is the name of the event.
 
+		As performance monitoring event names are case
+		insensitive in the perf tool, the perf tool only looks
+		for lower or upper case event names in sysfs to avoid
+		scanning the directory. It is therefore required the
+		name of the event here is either lower or upper case.
+
 		File contents:
 
 			<term>[=<value>][,<term>[=<value>]]...
diff --git a/Documentation/ABI/testing/sysfs-devices-hisi_ptt b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hisi_ptt
index d7e206b490..1119766564 100644
--- a/Documentation/ABI/testing/sysfs-devices-hisi_ptt
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hisi_ptt
@@ -1,4 +1,4 @@
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <yangyicong@hisilicon.com>
@@ -8,7 +8,7 @@ Description:	This directory contains files for tuning the PCIe link
 
 		See Documentation/trace/hisi-ptt.rst for more information.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <yangyicong@hisilicon.com>
@@ -18,7 +18,7 @@ Description:	(RW) Controls the weight of Tx completion TLPs, which influence
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <yangyicong@hisilicon.com>
@@ -28,7 +28,7 @@ Description:	(RW) Controls the weight of Tx non-posted TLPs, which influence
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <yangyicong@hisilicon.com>
@@ -38,7 +38,7 @@ Description:	(RW) Controls the weight of Tx posted TLPs, which influence the
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <yangyicong@hisilicon.com>
@@ -49,7 +49,7 @@ Description:	(RW) Control the allocated buffer watermark for inbound packets.
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <yangyicong@hisilicon.com>
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 2e6d5ebfd3..7cee78ad41 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -243,7 +243,8 @@ Description:
 		less measurements. Units after application of scale and offset
 		are milli degrees Celsius.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_input
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_input
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_input
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-ad9739a b/Documentation/ABI/testing/sysfs-bus-iio-ad9739a
new file mode 100644
index 0000000000..ed59299e6f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-ad9739a
@@ -0,0 +1,19 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_operating_mode
+KernelVersion:	6.9
+Contact:	linux-iio@vger.kernel.org
+Description:
+		DAC operating mode. One of the following modes can be selected:
+
+		* normal: This is DAC normal mode.
+		* mixed-mode: In this mode the output is effectively chopped at
+			      the DAC sample rate. This has the effect of
+			      reducing the power of the fundamental signal while
+			      increasing the power of the images centered around
+			      the DAC sample rate, thus improving the output
+			      power of these images.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_operating_mode_available
+KernelVersion:	6.9
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Available operating modes.
diff --git a/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub b/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-dev
index 42deb05520..b06a48c3c8 100644
--- a/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
+++ b/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-dev
@@ -5,4 +5,5 @@ Contact:	Matthias Kaehlcke <matthias@kaehlcke.net>
 		linux-usb@vger.kernel.org
 Description:
 		(RW) Controls whether the USB hub remains always powered
-		during system suspend or not.
\ No newline at end of file
+		during system suspend or not. This attribute is not
+		available for non-hub devices.
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
index 8c57d27805..22f28f2e9a 100644
--- a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
@@ -12,6 +12,16 @@ Description:
 		The exact format is described in:
 		Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
 
+What:		/sys/class/leds/<led>/hr_pattern
+Date:		April 2024
+Description:
+		Specify a software pattern for the LED, that supports altering
+		the brightness for the specified duration with one software
+		timer. It can do gradual dimming and step change of brightness.
+
+		Unlike the /sys/class/leds/<led>/pattern, this attribute runs
+		a pattern on high-resolution timer (hrtimer).
+
 What:		/sys/class/leds/<led>/hw_pattern
 Date:		September 2018
 KernelVersion:	4.20
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 710d47be11..e7e160954e 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -423,7 +423,7 @@ What:		/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats
 		/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/occ_reset
 Date:		March 2016
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
-		Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+		Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	POWERNV CPUFreq driver's frequency throttle stats directory and
 		attributes
 
@@ -473,7 +473,7 @@ What:		/sys/devices/system/cpu/cpufreq/policyX/throttle_stats
 		/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/occ_reset
 Date:		March 2016
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
-		Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+		Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	POWERNV CPUFreq driver's frequency throttle stats directory and
 		attributes
 
@@ -608,7 +608,7 @@ Description:	Umwait control
 What:		/sys/devices/system/cpu/svm
 Date:		August 2019
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
-		Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+		Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Secure Virtual Machine
 
 		If 1, it means the system is using the Protected Execution
@@ -617,7 +617,7 @@ Description:	Secure Virtual Machine
 
 What:		/sys/devices/system/cpu/cpuX/purr
 Date:		Apr 2005
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	PURR ticks for this CPU since the system boot.
 
 		The Processor Utilization Resources Register (PURR) is
@@ -628,7 +628,7 @@ Description:	PURR ticks for this CPU since the system boot.
 
 What: 		/sys/devices/system/cpu/cpuX/spurr
 Date:		Dec 2006
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	SPURR ticks for this CPU since the system boot.
 
 		The Scaled Processor Utilization Resources Register
@@ -640,7 +640,7 @@ Description:	SPURR ticks for this CPU since the system boot.
 
 What: 		/sys/devices/system/cpu/cpuX/idle_purr
 Date:		Apr 2020
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	PURR ticks for cpuX when it was idle.
 
 		This sysfs interface exposes the number of PURR ticks
@@ -648,7 +648,7 @@ Description:	PURR ticks for cpuX when it was idle.
 
 What: 		/sys/devices/system/cpu/cpuX/idle_spurr
 Date:		Apr 2020
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	SPURR ticks for cpuX when it was idle.
 
 		This sysfs interface exposes the number of SPURR ticks
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
index 023fd82de3..d792a56f59 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon
@@ -10,7 +10,7 @@ Description:	RW. Card reactive sustained  (PL1) power limit in microwatts.
 		power limit is disabled, writing 0 disables the
 		limit. Writing values > 0 and <= TDP will enable the power limit.
 
-		Only supported for particular Intel xe graphics platforms.
+		Only supported for particular Intel Xe graphics platforms.
 
 What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_rated_max
 Date:		September 2023
@@ -18,53 +18,93 @@ KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
 Description:	RO. Card default power limit (default TDP setting).
 
-		Only supported for particular Intel xe graphics platforms.
+		Only supported for particular Intel Xe graphics platforms.
 
-What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_crit
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/energy1_input
 Date:		September 2023
 KernelVersion:	6.5
 Contact:	intel-xe@lists.freedesktop.org
-Description:	RW. Card reactive critical (I1) power limit in microwatts.
+Description:	RO. Card energy input of device in microjoules.
+
+		Only supported for particular Intel Xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max_interval
+Date:		October 2023
+KernelVersion:	6.6
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RW. Card sustained power limit interval (Tau in PL1/Tau) in
+		milliseconds over which sustained power is averaged.
+
+		Only supported for particular Intel Xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power2_max
+Date:		February 2024
+KernelVersion:	6.8
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RW. Package reactive sustained  (PL1) power limit in microwatts.
+
+		The power controller will throttle the operating frequency
+		if the power averaged over a window (typically seconds)
+		exceeds this limit. A read value of 0 means that the PL1
+		power limit is disabled, writing 0 disables the
+		limit. Writing values > 0 and <= TDP will enable the power limit.
+
+		Only supported for particular Intel Xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power2_rated_max
+Date:		February 2024
+KernelVersion:	6.8
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RO. Package default power limit (default TDP setting).
 
-		Card reactive critical (I1) power limit in microwatts is exposed
+		Only supported for particular Intel Xe graphics platforms.
+
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power2_crit
+Date:		February 2024
+KernelVersion:	6.8
+Contact:	intel-xe@lists.freedesktop.org
+Description:	RW. Package reactive critical (I1) power limit in microwatts.
+
+		Package reactive critical (I1) power limit in microwatts is exposed
 		for client products. The power controller will throttle the
 		operating frequency if the power averaged over a window exceeds
 		this limit.
 
-		Only supported for particular Intel xe graphics platforms.
+		Only supported for particular Intel Xe graphics platforms.
 
-What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/curr1_crit
-Date:		September 2023
-KernelVersion:	6.5
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/curr2_crit
+Date:		February 2024
+KernelVersion:	6.8
 Contact:	intel-xe@lists.freedesktop.org
-Description:	RW. Card reactive critical (I1) power limit in milliamperes.
+Description:	RW. Package reactive critical (I1) power limit in milliamperes.
 
-		Card reactive critical (I1) power limit in milliamperes is
+		Package reactive critical (I1) power limit in milliamperes is
 		exposed for server products. The power controller will throttle
 		the operating frequency if the power averaged over a window
 		exceeds this limit.
 
-What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/in0_input
-Date:		September 2023
-KernelVersion:	6.5
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/energy2_input
+Date:		February 2024
+KernelVersion:	6.8
 Contact:	intel-xe@lists.freedesktop.org
-Description:	RO. Current Voltage in millivolt.
+Description:	RO. Package energy input of device in microjoules.
 
-		Only supported for particular Intel xe graphics platforms.
+		Only supported for particular Intel Xe graphics platforms.
 
-What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/energy1_input
-Date:		September 2023
-KernelVersion:	6.5
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power2_max_interval
+Date:		February 2024
+KernelVersion:	6.8
 Contact:	intel-xe@lists.freedesktop.org
-Description:	RO. Energy input of device in microjoules.
+Description:	RW. Package sustained power limit interval (Tau in PL1/Tau) in
+		milliseconds over which sustained power is averaged.
 
-		Only supported for particular Intel xe graphics platforms.
+		Only supported for particular Intel Xe graphics platforms.
 
-What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max_interval
-Date:		October 2023
-KernelVersion:	6.6
+What:		/sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/in1_input
+Date:		February 2024
+KernelVersion:	6.8
 Contact:	intel-xe@lists.freedesktop.org
-Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
-		milliseconds over which sustained power is averaged.
+Description:	RO. Package current voltage in millivolt.
 
-		Only supported for particular Intel xe graphics platforms.
+		Only supported for particular Intel Xe graphics platforms.
diff --git a/Documentation/ABI/testing/sysfs-driver-panfrost-profiling b/Documentation/ABI/testing/sysfs-driver-panfrost-profiling
new file mode 100644
index 0000000000..7597c420e5
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-panfrost-profiling
@@ -0,0 +1,10 @@
+What:		/sys/bus/platform/drivers/panfrost/.../profiling
+Date:		February 2024
+KernelVersion:	6.8.0
+Contact:	Adrian Larumbe <adrian.larumbe@collabora.com>
+Description:
+		Get/set drm fdinfo's engine and cycles profiling status.
+		Valid values are:
+		0: Don't enable fdinfo job profiling sources.
+		1: Enable fdinfo job profiling sources, this enables both the GPU's
+		timestamp and cycle counter registers.
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-powercap b/Documentation/ABI/testing/sysfs-firmware-opal-powercap
index c9b66ec4f1..d2d12ee892 100644
--- a/Documentation/ABI/testing/sysfs-firmware-opal-powercap
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-powercap
@@ -1,6 +1,6 @@
 What:		/sys/firmware/opal/powercap
 Date:		August 2017
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Powercap directory for Powernv (P8, P9) servers
 
 		Each folder in this directory contains a
@@ -11,7 +11,7 @@ What:		/sys/firmware/opal/powercap/system-powercap
 		/sys/firmware/opal/powercap/system-powercap/powercap-max
 		/sys/firmware/opal/powercap/system-powercap/powercap-current
 Date:		August 2017
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	System powercap directory and attributes applicable for
 		Powernv (P8, P9) servers
 
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-psr b/Documentation/ABI/testing/sysfs-firmware-opal-psr
index cc2ece70e3..1e55b56a0f 100644
--- a/Documentation/ABI/testing/sysfs-firmware-opal-psr
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-psr
@@ -1,6 +1,6 @@
 What:		/sys/firmware/opal/psr
 Date:		August 2017
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Power-Shift-Ratio directory for Powernv P9 servers
 
 		Power-Shift-Ratio allows to provide hints the firmware
@@ -10,7 +10,7 @@ Description:	Power-Shift-Ratio directory for Powernv P9 servers
 
 What:		/sys/firmware/opal/psr/cpu_to_gpu_X
 Date:		August 2017
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	PSR sysfs attributes for Powernv P9 servers
 
 		Power-Shift-Ratio between CPU and GPU for a given chip
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups b/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
index 3a2dfe542e..fcb1fb4795 100644
--- a/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
@@ -1,6 +1,6 @@
 What:		/sys/firmware/opal/sensor_groups
 Date:		August 2017
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Sensor groups directory for POWER9 powernv servers
 
 		Each folder in this directory contains a sensor group
@@ -11,7 +11,7 @@ Description:	Sensor groups directory for POWER9 powernv servers
 
 What:		/sys/firmware/opal/sensor_groups/<sensor_group_name>/clear
 Date:		August 2017
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Sysfs file to clear the min-max of all the sensors
 		belonging to the group.
 
diff --git a/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info b/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info
index 141a6b3714..f5cefb81ac 100644
--- a/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info
+++ b/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info
@@ -1,6 +1,6 @@
 What:		/sys/firmware/papr/energy_scale_info
 Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Directory hosting a set of platform attributes like
 		energy/frequency on Linux running as a PAPR guest.
 
@@ -10,20 +10,20 @@ Description:	Directory hosting a set of platform attributes like
 
 What:		/sys/firmware/papr/energy_scale_info/<id>
 Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Energy, frequency attributes directory for POWERVM servers
 
 What:		/sys/firmware/papr/energy_scale_info/<id>/desc
 Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	String description of the energy attribute of <id>
 
 What:		/sys/firmware/papr/energy_scale_info/<id>/value
 Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Numeric value of the energy attribute of <id>
 
 What:		/sys/firmware/papr/energy_scale_info/<id>/value_desc
 Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	String value of the energy attribute of <id>
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
index 1a4d839533..cad6c3dc1f 100644
--- a/Documentation/ABI/testing/sysfs-fs-f2fs
+++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -331,7 +331,7 @@ Date:		January 2018
 Contact:	Jaegeuk Kim <jaegeuk@kernel.org>
 Description:	This indicates how many GC can be failed for the pinned
 		file. If it exceeds this, F2FS doesn't guarantee its pinning
-		state. 2048 trials is set by default.
+		state. 2048 trials is set by default, and 65535 as maximum.
 
 What:		/sys/fs/f2fs/<disk>/extension_list
 Date:		February 2018
diff --git a/Documentation/ABI/testing/sysfs-kernel-fadump b/Documentation/ABI/testing/sysfs-kernel-fadump
index 8f7a64a817..2f9daa7ca5 100644
--- a/Documentation/ABI/testing/sysfs-kernel-fadump
+++ b/Documentation/ABI/testing/sysfs-kernel-fadump
@@ -38,3 +38,21 @@ Contact:	linuxppc-dev@lists.ozlabs.org
 Description:	read only
 		Provide information about the amount of memory reserved by
 		FADump to save the crash dump in bytes.
+
+What:		/sys/kernel/fadump/hotplug_ready
+Date:		Apr 2024
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read only
+		Kdump udev rule re-registers fadump on memory add/remove events,
+		primarily to update the elfcorehdr. This sysfs indicates the
+		kdump udev rule that fadump re-registration is not required on
+		memory add/remove events because elfcorehdr is now prepared in
+		the second/fadump kernel.
+User:		kexec-tools
+
+What:		/sys/kernel/fadump/bootargs_append
+Date:		May 2024
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read/write
+		This is a special sysfs file available to setup additional
+		parameters to be passed to capture kernel.
diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-damon b/Documentation/ABI/testing/sysfs-kernel-mm-damon
index dad4d5ffd7..cef6e1d20b 100644
--- a/Documentation/ABI/testing/sysfs-kernel-mm-damon
+++ b/Documentation/ABI/testing/sysfs-kernel-mm-damon
@@ -314,9 +314,9 @@ Date:		Dec 2022
 Contact:	SeongJae Park <sj@kernel.org>
 Description:	Writing to and reading from this file sets and gets the type of
 		the memory of the interest.  'anon' for anonymous pages,
-		'memcg' for specific memory cgroup, 'addr' for address range
-		(an open-ended interval), or 'target' for DAMON monitoring
-		target can be written and read.
+		'memcg' for specific memory cgroup, 'young' for young pages,
+		'addr' for address range (an open-ended interval), or 'target'
+		for DAMON monitoring target can be written and read.
 
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/memcg_path
 Date:		Dec 2022
diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-transparent-hugepage b/Documentation/ABI/testing/sysfs-kernel-mm-transparent-hugepage
new file mode 100644
index 0000000000..7bfbb9cc2c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-mm-transparent-hugepage
@@ -0,0 +1,18 @@
+What:		/sys/kernel/mm/transparent_hugepage/
+Date:		April 2024
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:
+		/sys/kernel/mm/transparent_hugepage/ contains a number of files and
+		subdirectories,
+
+			- defrag
+			- enabled
+			- hpage_pmd_size
+			- khugepaged
+			- shmem_enabled
+			- use_zero_page
+			- subdirectories of the form hugepages-<size>kB, where <size>
+			  is the page size of the hugepages supported by the kernel/CPU
+			  combination.
+
+		See Documentation/admin-guide/mm/transhuge.rst for details.
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi
index 8a7e25bde0..28144371a0 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-wmi
+++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi
@@ -126,6 +126,14 @@ Description:
 		Change the mini-LED mode:
 			* 0 - Single-zone,
 			* 1 - Multi-zone
+			* 2 - Multi-zone strong (available on newer generation mini-led)
+
+What:		/sys/devices/platform/<platform>/available_mini_led_mode
+Date:		Apr 2024
+KernelVersion:	6.10
+Contact:	"Luke Jones" <luke@ljones.dev>
+Description:
+		List the available mini-led modes.
 
 What:		/sys/devices/platform/<platform>/ppt_pl1_spl
 Date:		Jun 2023
@@ -186,3 +194,21 @@ Contact:	"Luke Jones" <luke@ljones.dev>
 Description:
 		Set the target temperature limit of the Nvidia dGPU:
 			* min=75, max=87
+
+What:		/sys/devices/platform/<platform>/boot_sound
+Date:		Apr 2024
+KernelVersion:	6.10
+Contact:	"Luke Jones" <luke@ljones.dev>
+Description:
+		Set if the BIOS POST sound is played on boot.
+			* 0 - False,
+			* 1 - True
+
+What:		/sys/devices/platform/<platform>/mcu_powersave
+Date:		Apr 2024
+KernelVersion:	6.10
+Contact:	"Luke Jones" <luke@ljones.dev>
+Description:
+		Set if the MCU can go in to low-power mode on system sleep
+			* 0 - False,
+			* 1 - True