summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /Documentation/devicetree/bindings/dma/img-mdc-dma.txt
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/dma/img-mdc-dma.txt')
-rw-r--r--Documentation/devicetree/bindings/dma/img-mdc-dma.txt57
1 files changed, 57 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/dma/img-mdc-dma.txt b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
new file mode 100644
index 0000000000..28c1341db3
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
@@ -0,0 +1,57 @@
+* IMG Multi-threaded DMA Controller (MDC)
+
+Required properties:
+- compatible: Must be "img,pistachio-mdc-dma".
+- reg: Must contain the base address and length of the MDC registers.
+- interrupts: Must contain all the per-channel DMA interrupts.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - sys: MDC system interface clock.
+- img,cr-periph: Must contain a phandle to the peripheral control syscon
+ node which contains the DMA request to channel mapping registers.
+- img,max-burst-multiplier: Must be the maximum supported burst size multiplier.
+ The maximum burst size is this value multiplied by the hardware-reported bus
+ width.
+- #dma-cells: Must be 3:
+ - The first cell is the peripheral's DMA request line.
+ - The second cell is a bitmap specifying to which channels the DMA request
+ line may be mapped (i.e. bit N set indicates channel N is usable).
+ - The third cell is the thread ID to be used by the channel.
+
+Optional properties:
+- dma-channels: Number of supported DMA channels, up to 32. If not specified
+ the number reported by the hardware is used.
+
+Example:
+
+mdc: dma-controller@18143000 {
+ compatible = "img,pistachio-mdc-dma";
+ reg = <0x18143000 0x1000>;
+ interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&system_clk>;
+ clock-names = "sys";
+
+ img,max-burst-multiplier = <16>;
+ img,cr-periph = <&cr_periph>;
+
+ #dma-cells = <3>;
+};
+
+spi@18100f00 {
+ ...
+ dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+ dma-names = "tx", "rx";
+ ...
+};