Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

9 files changed, 250 insertions, 74 deletions

diff --git a/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml
new file mode 100644
index 0000000000..cf11aa7ec8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed GPIO controller
+
+maintainers:
+  - Andrew Jeffery <andrew@codeconstruct.com.au>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-gpio
+      - aspeed,ast2500-gpio
+      - aspeed,ast2600-gpio
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: The clock to use for debounce timings
+
+  gpio-controller: true
+  gpio-line-names:
+    minItems: 36
+    maxItems: 232
+
+  gpio-ranges: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  ngpios:
+    minimum: 36
+    maximum: 232
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - gpio-controller
+  - "#gpio-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2400-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 220
+          maxItems: 220
+        ngpios:
+          const: 220
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2500-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 232
+          maxItems: 232
+        ngpios:
+          const: 232
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2600-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 36
+          maxItems: 208
+        ngpios:
+          enum: [ 36, 208 ]
+      required:
+        - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@1e780000 {
+        compatible = "aspeed,ast2400-gpio";
+        reg = <0x1e780000 0x1000>;
+        interrupts = <20>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+  - |
+    gpio: gpio@1e780000 {
+        compatible = "aspeed,ast2500-gpio";
+        reg = <0x1e780000 0x200>;
+        interrupts = <20>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 232>;
+    };
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio0: gpio@1e780000 {
+        compatible = "aspeed,ast2600-gpio";
+        reg = <0x1e780000 0x400>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 208>;
+        ngpios = <208>;
+    };
+    gpio1: gpio@1e780800 {
+        compatible = "aspeed,ast2600-gpio";
+        reg = <0x1e780800 0x800>;
+        clocks = <&syscon ASPEED_CLK_APB1>;
+        interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 208 36>;
+        ngpios = <36>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
index 6e81f8b755..d543fd1b8b 100644
--- a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
@@ -1,7 +1,6 @@
 Gateworks PLD GPIO controller bindings
 
-The GPIO controller should be a child node on an I2C bus,
-see: i2c/i2c.txt for details.
+The GPIO controller should be a child node on an I2C bus.
 
 Required properties:
 - compatible: Should be "gateworks,pld-gpio"
diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
deleted file mode 100644
index b2033fc3a7..0000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Aspeed GPIO controller Device Tree Bindings
--------------------------------------------
-
-Required properties:
-- compatible		: Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio",
-					or "aspeed,ast2600-gpio".
-
-- #gpio-cells 		: Should be two
-			  - First cell is the GPIO line number
-			  - Second cell is used to specify optional
-			    parameters (unused)
-
-- reg			: Address and length of the register set for the device
-- gpio-controller	: Marks the device node as a GPIO controller.
-- interrupts		: Interrupt specifier (see interrupt bindings for
-			  details)
-- interrupt-controller	: Mark the GPIO controller as an interrupt-controller
-
-Optional properties:
-
-- clocks		: A phandle to the clock to use for debounce timings
-- ngpios		: Number of GPIOs controlled by this controller. Should	be set
-				  when there are multiple GPIO controllers on a SoC (ast2600).
-
-The gpio and interrupt properties are further described in their respective
-bindings documentation:
-
-- Documentation/devicetree/bindings/gpio/gpio.txt
-- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-  Example:
-	gpio@1e780000 {
-		#gpio-cells = <2>;
-		compatible = "aspeed,ast2400-gpio";
-		gpio-controller;
-		interrupts = <20>;
-		reg = <0x1e780000 0x1000>;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
index f1bd1e6b2e..33d4e47165 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
@@ -115,7 +115,7 @@ allOf:
       required:
         - reg
 
-unevaluatedProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
deleted file mode 100644
index 8315ac7780..0000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Nomadik GPIO controller
-
-Required properties:
-- compatible            : Should be "st,nomadik-gpio".
-- reg                   : Physical base address and length of the controller's registers.
-- interrupts            : The interrupt outputs from the controller.
-- #gpio-cells           : Should be two:
-                            The first cell is the pin number.
-                            The second cell is used to specify optional parameters:
-                              - bits[3:0] trigger type and level flags:
-                                  1 = low-to-high edge triggered.
-                                  2 = high-to-low edge triggered.
-                                  4 = active high level-sensitive.
-                                  8 = active low level-sensitive.
-- gpio-controller       : Marks the device node as a GPIO controller.
-- interrupt-controller  : Marks the device node as an interrupt controller.
-- gpio-bank             : Specifies which bank a controller owns.
-- st,supports-sleepmode : Specifies whether controller can sleep or not
-
-Example:
-
-                gpio1: gpio@8012e080 {
-                        compatible = "st,nomadik-gpio";
-                        reg =  <0x8012e080 0x80>;
-                        interrupts = <0 120 0x4>;
-                        #gpio-cells = <2>;
-                        gpio-controller;
-                        interrupt-controller;
-                        st,supports-sleepmode;
-                        gpio-bank = <1>;
-                };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
index 452f8972a9..6f73961001 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
@@ -28,6 +28,9 @@ properties:
     minItems: 4
     maxItems: 8
 
+  label:
+    description: A descriptive name for this device.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
index 9cf6137dd5..65155bb701 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
@@ -9,7 +9,7 @@ title: Marvell PXA GPIO controller
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
   - Bartosz Golaszewski <bgolaszewski@baylibre.com>
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 allOf:
   - if:
diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
index aa424e2b95..cc7a950a60 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
@@ -53,6 +53,7 @@ properties:
               - renesas,gpio-r8a779a0     # R-Car V3U
               - renesas,gpio-r8a779f0     # R-Car S4-8
               - renesas,gpio-r8a779g0     # R-Car V4H
+              - renesas,gpio-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-gpio # R-Car Gen4
 
   reg:
diff --git a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
new file mode 100644
index 0000000000..38d37d8f72
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,nomadik-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nomadik GPIO controller
+
+description:
+  The Nomadik GPIO driver handles Nomadik SoC GPIO blocks. This block has also
+  been called ST STA2X11. On the Nomadik platform, this driver is intertwined
+  with pinctrl-nomadik.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - st,nomadik-gpio
+      - mobileye,eyeq5-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-bank:
+    description: System-wide GPIO bank index.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  st,supports-sleepmode:
+    description: Whether the controller can sleep or not.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  clocks:
+    maxItems: 1
+
+  gpio-ranges:
+    maxItems: 1
+
+  ngpios:
+    minimum: 0
+    maximum: 32
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - gpio-controller
+  - interrupt-controller
+  - gpio-bank
+
+unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mobileye,eyeq5-gpio
+    then:
+      properties:
+        st,supports-sleepmode: false
+
+examples:
+  - |
+    gpio@8012e080 {
+        compatible = "st,nomadik-gpio";
+        reg =  <0x8012e080 0x80>;
+        interrupts = <0 120 0x4>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        interrupt-controller;
+        st,supports-sleepmode;
+        gpio-bank = <1>;
+    };