Adding upstream version 6.10.3.upstream/6.10.3

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 0 insertions, 38 deletions

diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt
deleted file mode 100644
index d0ae46d7ba..0000000000
--- a/Documentation/devicetree/bindings/hwmon/adc128d818.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-TI ADC128D818 ADC System Monitor With Temperature Sensor
---------------------------------------------------------
-
-Operation modes:
-
- - Mode 0:  7 single-ended voltage readings (IN0-IN6),
-            1 temperature reading (internal)
- - Mode 1:  8 single-ended voltage readings (IN0-IN7),
-            no temperature
- - Mode 2:  4 pseudo-differential voltage readings
-              (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6),
-            1 temperature reading (internal)
- - Mode 3:  4 single-ended voltage readings (IN0-IN3),
-            2 pseudo-differential voltage readings
-              (IN4-IN5, IN7-IN6),
-            1 temperature reading (internal)
-
-If no operation mode is configured via device tree, the driver keeps the
-currently active chip operation mode (default is mode 0).
-
-
-Required node properties:
-
- - compatible:  must be set to "ti,adc128d818"
- - reg:         I2C address of the device
-
-Optional node properties:
-
- - ti,mode:     Operation mode (u8) (see above).
-
-
-Example (operation mode 2):
-
-	adc128d818@1d {
-		compatible = "ti,adc128d818";
-		reg = <0x1d>;
-		ti,mode = /bits/ 8 <2>;
-	};