diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
| commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
| tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /Documentation/devicetree/bindings/i2c | |
| parent | Initial commit. (diff) | |
| download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip | |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/i2c')
83 files changed, 6776 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml new file mode 100644 index 0000000000..5a799246a3 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/allwinner,sun6i-a31-p2wi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface) + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: allwinner,sun6i-a31-p2wi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + clock-frequency: + minimum: 1 + maximum: 6000000 + +required: + - compatible + - reg + - interrupts + - clocks + - resets + +unevaluatedProperties: false + +examples: + - | + i2c@1f03400 { + compatible = "allwinner,sun6i-a31-p2wi"; + reg = <0x01f03400 0x400>; + interrupts = <0 39 4>; + clocks = <&apb0_gates 3>; + clock-frequency = <100000>; + resets = <&apb0_rst 3>; + #address-cells = <1>; + #size-cells = <0>; + + axp221: pmic@68 { + /* compatible = "x-powers,axp221"; */ + reg = <0x68>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml new file mode 100644 index 0000000000..26bed558c6 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson I2C Controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + - Beniamino Galvani <b.galvani@gmail.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - amlogic,meson6-i2c # Meson6, Meson8 and compatible SoCs + - amlogic,meson-gxbb-i2c # GXBB and compatible SoCs + - amlogic,meson-axg-i2c # AXG and compatible SoCs + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + i2c@c8100500 { + compatible = "amlogic,meson6-i2c"; + reg = <0xc8100500 0x20>; + interrupts = <92>; + clocks = <&clk81>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml new file mode 100644 index 0000000000..077d2a539c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/apple,i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple/PASemi I2C controller + +maintainers: + - Sven Peter <sven@svenpeter.dev> + +description: | + Apple SoCs such as the M1 come with a I2C controller based on the one found + in machines with P. A. Semi's PWRficient processors. + The bus is used to communicate with e.g. USB PD chips or the speaker + amp. + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + items: + - enum: + - apple,t8103-i2c + - apple,t8112-i2c + - apple,t6000-i2c + - const: apple,i2c + + reg: + maxItems: 1 + + clocks: + items: + - description: I2C bus reference clock + + interrupts: + maxItems: 1 + + clock-frequency: + description: | + Desired I2C bus clock frequency in Hz. If not specified, 100 kHz will be + used. This frequency is generated by dividing the reference clock. + Allowed values are between ref_clk/(16*4) and ref_clk/(16*255). + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +unevaluatedProperties: false + +examples: + - | + i2c@35010000 { + compatible = "apple,t8103-i2c", "apple,i2c"; + reg = <0x35010000 0x4000>; + interrupt-parent = <&aic>; + interrupts = <0 627 4>; + clocks = <&ref_clk>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml new file mode 100644 index 0000000000..e58465d1b0 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/arm,i2c-versatile.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C Controller on ARM Ltd development platforms + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: arm,versatile-i2c + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +... + diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml new file mode 100644 index 0000000000..6df27b47b9 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs + +maintainers: + - Rayn Chen <rayn_chen@aspeedtech.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - aspeed,ast2400-i2c-bus + - aspeed,ast2500-i2c-bus + - aspeed,ast2600-i2c-bus + + reg: + minItems: 1 + items: + - description: address offset and range of bus + - description: address offset and range of bus buffer + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: + root clock of bus, should reference the APB + clock in the second cell + + resets: + maxItems: 1 + + bus-frequency: + minimum: 500 + maximum: 4000000 + default: 100000 + description: frequency of the bus clock in Hz defaults to 100 kHz when not + specified + + multi-master: + type: boolean + description: + states that there is another master active on this bus + +required: + - reg + - compatible + - clocks + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + i2c@40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2500-i2c-bus"; + reg = <0x40 0x40>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; + bus-frequency = <100000>; + interrupts = <0>; + interrupt-parent = <&i2c_ic>; + }; diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml new file mode 100644 index 0000000000..6adedd3ec3 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C for Atmel/Microchip platforms + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - atmel,at91rm9200-i2c + - atmel,at91sam9261-i2c + - atmel,at91sam9260-i2c + - atmel,at91sam9g20-i2c + - atmel,at91sam9g10-i2c + - atmel,at91sam9x5-i2c + - atmel,sama5d4-i2c + - atmel,sama5d2-i2c + - microchip,sam9x60-i2c + - items: + - const: microchip,sama7g5-i2c + - const: microchip,sam9x60-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-frequency: + default: 100000 + + dmas: + items: + - description: TX DMA Channel Specifier + - description: RX DMA Channel Specifier + + dma-names: + items: + - const: tx + - const: rx + + atmel,fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Maximum number of data the RX and TX FIFOs can store for + FIFO capable I2C controllers. + + scl-gpios: true + + sda-gpios: true + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + - clocks + +allOf: + - $ref: i2c-controller.yaml + - if: + properties: + compatible: + contains: + enum: + - atmel,sama5d4-i2c + - atmel,sama5d2-i2c + - microchip,sam9x60-i2c + - microchip,sama7g5-i2c + then: + properties: + i2c-sda-hold-time-ns: + description: + TWD hold time + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/gpio/gpio.h> + + i2c0: i2c@fff84000 { + compatible = "atmel,at91sam9g20-i2c"; + reg = <0xfff84000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi0_clk>; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + pagesize = <128>; + }; + }; + + i2c1: i2c@f8034600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0xf8034600 0x100>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(11)>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(12)>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx0>; + atmel,fifo-size = <16>; + i2c-sda-hold-time-ns = <336>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + eeprom@54 { + compatible = "atmel,24c02"; + reg = <0x54>; + pagesize = <16>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml new file mode 100644 index 0000000000..8256490a7a --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/brcm,bcm2835-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 I2C controller + +maintainers: + - Stephen Warren <swarren@wwwdotorg.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - brcm,bcm2835-i2c + - items: + - const: brcm,bcm2711-i2c + - const: brcm,bcm2835-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: true + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + i2c@7e205000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e205000 0x1000>; + interrupts = <2 21>; + clocks = <&clk_i2c>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml new file mode 100644 index 0000000000..7070c04469 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/brcm,brcmstb-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom STB BSC IIC Master Controller + +maintainers: + - Kamal Dasu <kdasu.kdev@gmail.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - brcm,bcm2711-hdmi-i2c + - brcm,brcmstb-i2c + - brcm,brcmper-i2c + + reg: + minItems: 1 + items: + - description: BSC register range + - description: Auto-I2C register range + + reg-names: + items: + - const: bsc + - const: auto-i2c + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + clock-frequency: + enum: + - 46875 + - 50000 + - 93750 + - 97500 + - 187500 + - 200000 + - 375000 + - 390000 + +required: + - compatible + - reg + - clock-frequency + +unevaluatedProperties: false + +if: + properties: + compatible: + contains: + enum: + - brcm,bcm2711-hdmi-i2c + +then: + properties: + reg: + minItems: 2 + + required: + - reg-names + +else: + properties: + reg: + maxItems: 1 + +examples: + - | + bsca: i2c@f0406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&irq0_intc>; + reg = <0xf0406200 0x58>; + interrupts = <0x18>; + interrupt-names = "upg_bsca"; + }; + + - | + ddc0: i2c@7ef04500 { + compatible = "brcm,bcm2711-hdmi-i2c"; + reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; + reg-names = "bsc", "auto-i2c"; + clock-frequency = <390000>; + }; + +... diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml new file mode 100644 index 0000000000..2aa75b7add --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/brcm,iproc-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc I2C controller + +maintainers: + - RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + +properties: + compatible: + enum: + - brcm,iproc-i2c + - brcm,iproc-nic-i2c + + reg: + maxItems: 1 + + clock-frequency: + enum: [ 100000, 400000 ] + + interrupts: + description: | + Should contain the I2C interrupt. For certain revisions of the I2C + controller, I2C interrupt is unwired to the interrupt controller. In such + case, this property should be left unspecified, and driver will fall back + to polling mode + maxItems: 1 + + brcm,ape-hsls-addr-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Host view of address mask into the 'APE' co-processor + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + const: brcm,iproc-nic-i2c + then: + required: + - brcm,ape-hsls-addr-mask + +unevaluatedProperties: false + +required: + - reg + - clock-frequency + - '#address-cells' + - '#size-cells' + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c@18008000 { + compatible = "brcm,iproc-i2c"; + reg = <0x18008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + + wm8750@1a { + compatible = "wlf,wm8750"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml new file mode 100644 index 0000000000..7a694af90f --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/brcm,kona-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family I2C controller + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + items: + - enum: + - brcm,bcm11351-i2c + - brcm,bcm21664-i2c + - brcm,bcm23550-i2c + - const: brcm,kona-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + enum: [ 100000, 400000, 1000000, 3400000 ] + +required: + - compatible + - reg + - interrupts + - clocks + - clock-frequency + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c@3e016000 { + compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c"; + reg = <0x3e016000 0x80>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bsc1_clk>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml new file mode 100644 index 0000000000..9f1d35ce1f --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence I2C controller + +maintainers: + - Michal Simek <michal.simek@amd.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - cdns,i2c-r1p10 # cadence i2c controller version 1.0 + - cdns,i2c-r1p14 # cadence i2c controller version 1.4 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + + resets: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-frequency: + minimum: 1 + maximum: 400000 + description: | + Desired operating frequency, in Hz, of the bus. + + clock-name: + const: pclk + description: | + Input clock name. + + fifo-depth: + description: + Size of the data FIFO in bytes. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 16 + enum: [2, 4, 8, 16, 32, 64, 128, 256] + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c@e0004000 { + compatible = "cdns,i2c-r1p10"; + clocks = <&clkc 38>; + resets = <&rstc 288>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xe0004000 0x1000>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <8>; + }; diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml new file mode 100644 index 0000000000..ab151c9db2 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/i2c/google,cros-ec-i2c-tunnel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C bus that tunnels through the ChromeOS EC (cros-ec) + +maintainers: + - Doug Anderson <dianders@chromium.org> + - Benson Leung <bleung@chromium.org> + +description: | + On some ChromeOS board designs we've got a connection to the EC + (embedded controller) but no direct connection to some devices on the + other side of the EC (like a battery and PMIC). To get access to + those devices we need to tunnel our i2c commands through the EC. + + The node for this device should be under a cros-ec node like + google,cros-ec-spi or google,cros-ec-i2c. + +allOf: + - $ref: i2c-controller.yaml# + +properties: + compatible: + const: google,cros-ec-i2c-tunnel + + google,remote-bus: + description: The EC bus we'd like to talk to. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - google,remote-bus + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + spi-max-frequency = <5000000>; + interrupts = <99 0>; + + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + + google,remote-bus = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml b/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml new file mode 100644 index 0000000000..7d7a8de7bc --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/hisilicon,ascend910-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon common I2C controller + +maintainers: + - Yicong Yang <yangyicong@hisilicon.com> + +description: + The HiSilicon common I2C controller can be used for many different + types of SoC such as Huawei Ascend AI series chips. + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: hisilicon,ascend910-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + default: 400000 + + i2c-sda-falling-time-ns: + default: 343 + + i2c-scl-falling-time-ns: + default: 203 + + i2c-sda-hold-time-ns: + default: 830 + + i2c-scl-rising-time-ns: + default: 365 + + i2c-digital-filter-width-ns: + default: 0 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c@38b0000 { + compatible = "hisilicon,ascend910-i2c"; + reg = <0x38b0000 0x10000>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + i2c-sda-falling-time-ns = <56>; + i2c-scl-falling-time-ns = <56>; + i2c-sda-hold-time-ns = <56>; + i2c-scl-rising-time-ns = <56>; + i2c-digital-filter; + i2c-digital-filter-width-ns = <0x0>; + clocks = <&alg_clk>; + clock-frequency = <400000>; + }; diff --git a/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml b/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml new file mode 100644 index 0000000000..6604dcd472 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/hpe,gxp-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HPE GXP SoC I2C Controller + +maintainers: + - Nick Hawkins <nick.hawkins@hpe.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: hpe,gxp-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-frequency: + default: 100000 + + hpe,sysreg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the global status and enable interrupt registers shared + between each I2C engine controller instance. It enables the I2C + engine controller to act as both a master or slave by being able to + arm and respond to interrupts from its engine. Each bit in the + registers represent the respective bit position. + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + i2c@2600 { + compatible = "hpe,gxp-i2c"; + reg = <0x2500 0x70>; + interrupts = <9>; + #address-cells = <1>; + #size-cells = <0>; + hpe,sysreg = <&sysreg_system_controller>; + clock-frequency = <10000>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-altera.txt b/Documentation/devicetree/bindings/i2c/i2c-altera.txt new file mode 100644 index 0000000000..767664f448 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-altera.txt @@ -0,0 +1,39 @@ +* Altera I2C Controller +* This is Altera's synthesizable logic block I2C Controller for use +* in Altera's FPGAs. + +Required properties : + - compatible : should be "altr,softip-i2c-v1.0" + - reg : Offset and length of the register set for the device + - interrupts : <IRQ> where IRQ is the interrupt number. + - clocks : phandle to input clock. + - #address-cells = <1>; + - #size-cells = <0>; + +Recommended properties : + - clock-frequency : desired I2C bus clock frequency in Hz. + +Optional properties : + - fifo-size : Size of the RX and TX FIFOs in bytes. + - Child nodes conforming to i2c bus binding + +Example : + + i2c@100080000 { + compatible = "altr,softip-i2c-v1.0"; + reg = <0x00000001 0x00080000 0x00000040>; + interrupt-parent = <&intc>; + interrupts = <0 43 4>; + clocks = <&clk_0>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + fifo-size = <4>; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + }; + diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.yaml b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.yaml new file mode 100644 index 0000000000..b618b5a343 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-arb-gpio-challenge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO-based I2C Arbitration Using a Challenge & Response Mechanism + +maintainers: + - Doug Anderson <dianders@chromium.org> + - Peter Rosin <peda@axentia.se> + +description: | + This uses GPIO lines and a challenge & response mechanism to arbitrate who is + the master of an I2C bus in a multimaster situation. + + In many cases using GPIOs to arbitrate is not needed and a design can use the + standard I2C multi-master rules. Using GPIOs is generally useful in the case + where there is a device on the bus that has errata and/or bugs that makes + standard multimaster mode not feasible. + + Note that this scheme works well enough but has some downsides: + * It is nonstandard (not using standard I2C multimaster) + * Having two masters on a bus in general makes it relatively hard to debug + problems (hard to tell if i2c issues were caused by one master, another, + or some device on the bus). + + Algorithm: + All masters on the bus have a 'bus claim' line which is an output that the + others can see. These are all active low with pull-ups enabled. We'll + describe these lines as: + * OUR_CLAIM: output from us signaling to other hosts that we want the bus + * THEIR_CLAIMS: output from others signaling that they want the bus + + The basic algorithm is to assert your line when you want the bus, then make + sure that the other side doesn't want it also. A detailed explanation is + best done with an example. + + Let's say we want to claim the bus. We: + 1. Assert OUR_CLAIM. + 2. Waits a little bit for the other sides to notice (slew time, say 10 + microseconds). + 3. Check THEIR_CLAIMS. If none are asserted then the we have the bus and we + are done. + 4. Otherwise, wait for a few milliseconds and see if THEIR_CLAIMS are released. + 5. If not, back off, release the claim and wait for a few more milliseconds. + 6. Go back to 1 (until retry time has expired). + +properties: + compatible: + const: i2c-arb-gpio-challenge + + i2c-parent: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The I2C bus that this multiplexer's master-side port is connected to. + + our-claim-gpios: + maxItems: 1 + description: + The GPIO that we use to claim the bus. + + slew-delay-us: + default: 10 + description: + Time to wait for a GPIO to go high. + + their-claim-gpios: + minItems: 1 + maxItems: 8 + description: + The GPIOs that the other sides use to claim the bus. Note that some + implementations may only support a single other master. + + wait-free-us: + default: 50000 + description: + We'll give up after this many microseconds. + + wait-retry-us: + default: 3000 + description: + We'll attempt another claim after this many microseconds. + + i2c-arb: + type: object + $ref: /schemas/i2c/i2c-controller.yaml + unevaluatedProperties: false + description: + I2C arbitration bus node. + +required: + - compatible + - i2c-arb + - our-claim-gpios + - their-claim-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c-arbitrator { + compatible = "i2c-arb-gpio-challenge"; + i2c-parent = <&i2c_4>; + + our-claim-gpios = <&gpf0 3 GPIO_ACTIVE_LOW>; + their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; + slew-delay-us = <10>; + wait-retry-us = <3000>; + wait-free-us = <50000>; + + i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + + sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + }; + + embedded-controller@1e { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpx1>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; + wakeup-source; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-atr.yaml b/Documentation/devicetree/bindings/i2c/i2c-atr.yaml new file mode 100644 index 0000000000..1939ab339b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-atr.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-atr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common i2c address translator properties + +maintainers: + - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> + +description: + An I2C Address Translator (ATR) is a device with an I2C slave parent + ("upstream") port and N I2C master child ("downstream") ports, and + forwards transactions from upstream to the appropriate downstream port + with a modified slave address. The address used on the parent bus is + called the "alias" and is (potentially) different from the physical + slave address of the child bus. Address translation is done by the + hardware. + +properties: + i2c-alias-pool: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + I2C alias pool is a pool of I2C addresses on the main I2C bus that can be + used to access the remote peripherals on the serializer's I2C bus. The + addresses must be available, not used by any other peripheral. Each + remote peripheral is assigned an alias from the pool, and transactions to + that address will be forwarded to the remote peripheral, with the address + translated to the remote peripheral's real address. This property is not + needed if there are no I2C addressable remote peripherals. + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt new file mode 100644 index 0000000000..7d53a2b795 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt @@ -0,0 +1,30 @@ +LSI Axxia I2C + +Required properties : +- compatible : Must be "lsi,api2c" +- reg : Offset and length of the register set for the device +- interrupts : the interrupt specifier +- #address-cells : Must be <1>; +- #size-cells : Must be <0>; +- clock-names : Must contain "i2c". +- clocks: Must contain an entry for each name in clock-names. See the common + clock bindings. + +Optional properties : +- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified, + the default 100 kHz frequency will be used. As only Normal and Fast modes + are supported, possible values are 100000 and 400000. + +Example : + +i2c@2010084000 { + compatible = "lsi,api2c"; + device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x20 0x10084000 0x00 0x1000>; + interrupts = <0 19 4>; + clocks = <&clk_per>; + clock-names = "i2c"; + clock-frequency = <400000>; +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt new file mode 100644 index 0000000000..c143948b2a --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt @@ -0,0 +1,27 @@ +Device tree bindings for i2c-cbus-gpio driver + +Required properties: + - compatible = "i2c-cbus-gpio"; + - gpios: clk, dat, sel + - #address-cells = <1>; + - #size-cells = <0>; + +Optional properties: + - child nodes conforming to i2c bus binding + +Example: + +i2c@0 { + compatible = "i2c-cbus-gpio"; + gpios = <&gpio 66 0 /* clk */ + &gpio 65 0 /* dat */ + &gpio 64 0 /* sel */ + >; + #address-cells = <1>; + #size-cells = <0>; + + retu: retu@1 { + compatible = "nokia,retu"; + reg = <0x1>; + }; +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt new file mode 100644 index 0000000000..6590501c53 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt @@ -0,0 +1,43 @@ +* Texas Instruments Davinci/Keystone I2C + +This file provides information, what the device node for the +davinci/keystone i2c interface contains. + +Required properties: +- compatible: "ti,davinci-i2c" or "ti,keystone-i2c"; +- reg : Offset and length of the register set for the device +- clocks: I2C functional clock phandle. + For 66AK2G this property should be set per binding, + Documentation/devicetree/bindings/clock/ti,sci-clk.yaml + +SoC-specific Required Properties: + +The following are mandatory properties for Keystone 2 66AK2G SoCs only: + +- power-domains: Should contain a phandle to a PM domain provider node + and an args specifier containing the I2C device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml + +Recommended properties : +- interrupts : standard interrupt property. +- clock-frequency : desired I2C bus clock frequency in Hz. +- ti,has-pfunc: boolean; if defined, it indicates that SoC supports PFUNC + registers. PFUNC registers allow to switch I2C pins to function as + GPIOs, so they can be toggled manually. + +Example (enbw_cmc board): + i2c@1c22000 { + compatible = "ti,davinci-i2c"; + reg = <0x22000 0x1000>; + clock-frequency = <100000>; + interrupts = <15>; + interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <0>; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt new file mode 100644 index 0000000000..86b2e433a9 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt @@ -0,0 +1,135 @@ +Pinctrl-based I2C Bus DeMux + +This binding describes an I2C bus demultiplexer that uses pin multiplexing to +route the I2C signals, and represents the pin multiplexing configuration using +the pinctrl device tree bindings. This may be used to select one I2C IP core at +runtime which may have a better feature set for a given task than another I2C +IP core on the SoC. The most simple example is to fall back to GPIO bitbanging +if your current runtime configuration hits an errata of the internal IP core. + + +-------------------------------+ + | SoC | + | | +-----+ +-----+ + | +------------+ | | dev | | dev | + | |I2C IP Core1|--\ | +-----+ +-----+ + | +------------+ \-------+ | | | + | |Pinctrl|--|------+--------+ + | +------------+ +-------+ | + | |I2C IP Core2|--/ | + | +------------+ | + | | + +-------------------------------+ + +Required properties: +- compatible: "i2c-demux-pinctrl" +- i2c-parent: List of phandles of I2C masters available for selection. The first + one will be used as default. +- i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C + parents. + +Furthermore, I2C mux properties and child nodes. See i2c-mux.yaml in this +directory. + +Example: + +Here is a snipplet for a bus to be demuxed. It contains various i2c clients for +HDMI, so the bus is named "i2c-hdmi": + + i2chdmi: i2c@8 { + + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&gpioi2c>, <&iic2>, <&i2c2>; + i2c-bus-name = "i2c-hdmi"; + #address-cells = <1>; + #size-cells = <0>; + + ak4643: sound-codec@12 { + compatible = "asahi-kasei,ak4643"; + + #sound-dai-cells = <0>; + reg = <0x12>; + }; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep0>; + }; + }; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + }; + +And for clarification, here are the snipplets for the i2c-parents: + + gpioi2c: i2c@9 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + gpios = <&gpio5 6 GPIO_ACTIVE_HIGH /* sda */ + &gpio5 5 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <5>; + }; + +... + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "i2c-hdmi"; + + clock-frequency = <100000>; +}; + +... + +&iic2 { + pinctrl-0 = <&iic2_pins>; + pinctrl-names = "i2c-hdmi"; + + clock-frequency = <100000>; +}; + +Please note: + +- pinctrl properties for the parent I2C controllers need a pinctrl state + with the same name as i2c-bus-name, not "default"! + +- the i2c masters must have their status "disabled". This driver will + enable them at runtime when needed. diff --git a/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt b/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt new file mode 100644 index 0000000000..457a098d4f --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt @@ -0,0 +1,25 @@ +Conexant Digicolor I2C controller + +Required properties: + - compatible: must be "cnxt,cx92755-i2c" + - reg: physical address and length of the device registers + - interrupts: a single interrupt specifier + - clocks: clock for the device + - #address-cells: should be <1> + - #size-cells: should be <0> + +Optional properties: +- clock-frequency: the desired I2C bus clock frequency in Hz; in + absence of this property the default value is used (100 kHz). + +Example: + + i2c: i2c@f0000120 { + compatible = "cnxt,cx92755-i2c"; + reg = <0xf0000120 0x10>; + interrupts = <28>; + clocks = <&main_clk>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml new file mode 100644 index 0000000000..3e52a0db6c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-exynos5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung's High Speed I2C controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + The Samsung's High Speed I2C controller is used to interface with I2C devices + at various speeds ranging from 100kHz to 3.4MHz. + + In case the HSI2C controller is encapsulated within USI block (it's the case + e.g. for Exynos850 and Exynos Auto V9 SoCs), it might be also necessary to + define USI node in device tree file, choosing "i2c" configuration. Please see + Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml for details. + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos5250-hsi2c # Exynos5250 and Exynos5420 + - samsung,exynos5260-hsi2c # Exynos5260 + - samsung,exynos7-hsi2c # Exynos7 + - samsung,exynosautov9-hsi2c # ExynosAutoV9 and Exynos850 + - const: samsung,exynos5-hsi2c # Exynos5250 and Exynos5420 + deprecated: true + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-frequency: + default: 100000 + description: + Desired operating frequency in Hz of the bus. + + If not specified, the bus operates in fast-speed mode at 100kHz. + + If specified, the bus operates in high-speed mode only if the + clock-frequency is >= 1MHz. + + clocks: + minItems: 1 + items: + - description: I2C operating clock + - description: Bus clock (APB) + + clock-names: + minItems: 1 + items: + - const: hsi2c + - const: hsi2c_pclk + +required: + - compatible + - reg + - interrupts + - clocks + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - samsung,exynosautov9-hsi2c + + then: + properties: + clocks: + minItems: 2 + + clock-names: + minItems: 2 + + required: + - clock-names + + else: + properties: + clocks: + maxItems: 1 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5420.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + hsi2c_8: i2c@12e00000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12e00000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + clocks = <&clock CLK_USI4>; + clock-names = "hsi2c"; + + pmic@66 { + /* compatible = "samsung,s2mps11-pmic"; */ + reg = <0x66>; + }; + }; + + - | + #include <dt-bindings/clock/exynos850.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + hsi2c_2: i2c@138c0000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x138c0000 0xc0>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>, + <&cmu_peri CLK_GOUT_HSI2C2_PCLK>; + clock-names = "hsi2c", "hsi2c_pclk"; + + pmic@66 { + /* compatible = "samsung,s2mps11-pmic"; */ + reg = <0x66>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-fsi.txt b/Documentation/devicetree/bindings/i2c/i2c-fsi.txt new file mode 100644 index 0000000000..b1be2ceb7e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-fsi.txt @@ -0,0 +1,40 @@ +Device-tree bindings for FSI-attached I2C master and busses +----------------------------------------------------------- + +Required properties: + - compatible = "ibm,i2c-fsi"; + - reg = < address size >; : The FSI CFAM address and address + space size. + - #address-cells = <1>; : Number of address cells in child + nodes. + - #size-cells = <0>; : Number of size cells in child nodes. + - child nodes : Nodes to describe busses off the I2C + master. + +Child node required properties: + - reg = < port number > : The port number on the I2C master. + +Child node optional properties: + - child nodes : Nodes to describe devices on the I2C + bus. + +Examples: + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = < 0x1800 0x400 >; + #address-cells = <1>; + #size-cells = <0>; + + i2c-bus@0 { + reg = <0>; + }; + + i2c-bus@1 { + reg = <1>; + + eeprom@50 { + compatible = "vendor,dev-name"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml new file mode 100644 index 0000000000..0cdc3e890d --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-gate.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common i2c gate properties + +maintainers: + - Peter Rosin <peda@axentia.se> + +description: | + An i2c gate is useful to e.g. reduce the digital noise for RF tuners connected + to the i2c bus. Gates are similar to arbitrators in that you need to perform + some kind of operation to access the i2c bus past the arbitrator/gate, but + there are no competing masters to consider for gates and therefore there is + no arbitration happening for gates. + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml + +properties: + $nodename: + const: i2c-gate + +additionalProperties: true + +examples: + - | + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ak8975@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml new file mode 100644 index 0000000000..afd4925c2a --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO bitbanged I2C + +maintainers: + - Wolfram Sang <wsa@kernel.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + items: + - const: i2c-gpio + + sda-gpios: + description: + gpio used for the sda signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. + maxItems: 1 + + scl-gpios: + description: + gpio used for the scl signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. + maxItems: 1 + + i2c-gpio,sda-output-only: + description: sda as output only + type: boolean + + i2c-gpio,scl-output-only: + description: scl as output only + type: boolean + + i2c-gpio,delay-us: + description: delay between GPIO operations (may depend on each platform) + + i2c-gpio,timeout-ms: + description: timeout to get data + + # Deprecated properties, do not use in new device tree sources: + gpios: + minItems: 2 + maxItems: 2 + description: sda and scl gpio, alternative for {sda,scl}-gpios + + i2c-gpio,sda-open-drain: + type: boolean + deprecated: true + description: this means that something outside of our control has put + the GPIO line used for SDA into open drain mode, and that something is + not the GPIO chip. It is essentially an inconsistency flag. + + i2c-gpio,scl-open-drain: + type: boolean + deprecated: true + description: this means that something outside of our control has put the + GPIO line used for SCL into open drain mode, and that something is not + the GPIO chip. It is essentially an inconsistency flag. + + i2c-gpio,sda-has-no-pullup: + type: boolean + description: sda is used in a non-compliant way and has no pull-up. + Therefore disable open-drain. This property is mutually-exclusive + with i2c-gpio,sda-open-drain. + + i2c-gpio,scl-has-no-pullup: + type: boolean + description: scl is used in a non-compliant way and has no pull-up. + Therefore disable open-drain. This property is mutually-exclusive + with i2c-gpio,scl-open-drain. + +dependencies: + i2c-gpio,sda-has-no-pullup: + not: + required: + - i2c-gpio,sda-open-drain + i2c-gpio,scl-has-no-pullup: + not: + required: + - i2c-gpio,scl-open-drain + +required: + - compatible + - sda-gpios + - scl-gpios + +unevaluatedProperties: false + +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt new file mode 100644 index 0000000000..f98b37401e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt @@ -0,0 +1,24 @@ +I2C for Hisilicon hix5hd2 chipset platform + +Required properties: +- compatible: Must be "hisilicon,hix5hd2-i2c" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: interrupt number to the cpu. +- #address-cells = <1>; +- #size-cells = <0>; +- clocks: phandles to input clocks. + +Optional properties: +- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000 +- Child nodes conforming to i2c bus binding + +Examples: +I2C0@f8b10000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0xf8b10000 0x1000>; + interrupts = <0 38 4>; + clocks = <&clock HIX5HD2_I2C0_RST>; + #address-cells = <1>; + #size-cells = <0>; +} diff --git a/Documentation/devicetree/bindings/i2c/i2c-img-scb.txt b/Documentation/devicetree/bindings/i2c/i2c-img-scb.txt new file mode 100644 index 0000000000..b6461602dc --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-img-scb.txt @@ -0,0 +1,26 @@ +IMG Serial Control Bus (SCB) I2C Controller + +Required Properties: +- compatible: "img,scb-i2c" +- reg: Physical base address and length of controller registers +- interrupts: Interrupt number used by the controller +- clocks : Should contain a clock specifier for each entry in clock-names +- clock-names : Should contain the following entries: + "scb", for the SCB core clock. + "sys", for the system clock. +- clock-frequency: The I2C bus frequency in Hz +- #address-cells: Should be <1> +- #size-cells: Should be <0> + +Example: + +i2c@18100000 { + compatible = "img,scb-i2c"; + reg = <0x18100000 0x200>; + interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&i2c0_clk>, <&system_clk>; + clock-names = "scb", "sys"; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml new file mode 100644 index 0000000000..4656f5112b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-imx-lpi2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Low Power Inter IC (LPI2C) for i.MX + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - fsl,imx7ulp-lpi2c + - items: + - enum: + - fsl,imx8qxp-lpi2c + - fsl,imx8dxl-lpi2c + - fsl,imx8qm-lpi2c + - fsl,imx8ulp-lpi2c + - fsl,imx93-lpi2c + - const: fsl,imx7ulp-lpi2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + assigned-clock-parents: true + assigned-clock-rates: true + assigned-clocks: true + clock-frequency: true + + clock-names: + items: + - const: per + - const: ipg + + clocks: + maxItems: 2 + + dmas: + items: + - description: DMA controller phandle and request line for TX + - description: DMA controller phandle and request line for RX + + dma-names: + items: + - const: tx + - const: rx + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx7ulp-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c@40a50000 { + compatible = "fsl,imx7ulp-lpi2c"; + reg = <0x40A50000 0x10000>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7ULP_CLK_LPI2C7>, + <&clks IMX7ULP_CLK_NIC1_BUS_DIV>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml new file mode 100644 index 0000000000..85ee1282d6 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-imx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + oneOf: + - const: fsl,imx1-i2c + - const: fsl,imx21-i2c + - const: fsl,vf610-i2c + - items: + - enum: + - fsl,ls1012a-i2c + - fsl,ls1021a-i2c + - fsl,ls1028a-i2c + - fsl,ls1043a-i2c + - fsl,ls1046a-i2c + - fsl,ls1088a-i2c + - fsl,ls208xa-i2c + - fsl,lx2160a-i2c + - const: fsl,vf610-i2c + - items: + - const: fsl,imx35-i2c + - const: fsl,imx1-i2c + - items: + - const: fsl,imx7d-i2c + - const: fsl,imx21-i2c + - items: + - enum: + - fsl,imx25-i2c + - fsl,imx27-i2c + - fsl,imx31-i2c + - fsl,imx50-i2c + - fsl,imx51-i2c + - fsl,imx53-i2c + - fsl,imx6q-i2c + - fsl,imx6sl-i2c + - fsl,imx6sx-i2c + - fsl,imx6sll-i2c + - fsl,imx6ul-i2c + - fsl,imx7s-i2c + - fsl,imx8mq-i2c + - fsl,imx8mm-i2c + - fsl,imx8mn-i2c + - fsl,imx8mp-i2c + - const: fsl,imx21-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ipg + + clock-frequency: + minimum: 1 + default: 100000 + maximum: 400000 + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + + sda-gpios: + maxItems: 1 + + scl-gpios: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx5-clock.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c@83fc4000 { + compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; + reg = <0x83fc4000 0x4000>; + interrupts = <63>; + clocks = <&clks IMX5_CLK_I2C2_GATE>; + }; + + - | + #include <dt-bindings/clock/vf610-clock.h> + + i2c@40066000 { + compatible = "fsl,vf610-i2c"; + reg = <0x40066000 0x1000>; + interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_I2C0>; + clock-names = "ipg"; + dmas = <&edma0 0 50>, + <&edma0 0 51>; + dma-names = "rx", "tx"; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt b/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt new file mode 100644 index 0000000000..dcc8390e0d --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt @@ -0,0 +1,20 @@ +i2c Controller on XScale platforms such as IOP3xx and IXP4xx + +Required properties: +- compatible : Must be one of + "intel,iop3xx-i2c" + "intel,ixp4xx-i2c"; +- reg +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- Child nodes conforming to i2c bus binding + +Example: + +i2c@c8011000 { + compatible = "intel,ixp4xx-i2c"; + reg = <0xc8011000 0x18>; + interrupts = <33 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt new file mode 100644 index 0000000000..4101aa621a --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt @@ -0,0 +1,33 @@ +NXP I2C controller for LPC2xxx/178x/18xx/43xx + +Required properties: + - compatible: must be "nxp,lpc1788-i2c" + - reg: physical address and length of the device registers + - interrupts: a single interrupt specifier + - clocks: clock for the device + - #address-cells: should be <1> + - #size-cells: should be <0> + +Optional properties: +- clock-frequency: the desired I2C bus clock frequency in Hz; in + absence of this property the default value is used (100 kHz). + +Example: +i2c0: i2c@400a1000 { + compatible = "nxp,lpc1788-i2c"; + reg = <0x400a1000 0x1000>; + interrupts = <18>; + clocks = <&ccu1 CLK_APB1_I2C0>; + #address-cells = <1>; + #size-cells = <0>; +}; + +&i2c0 { + clock-frequency = <400000>; + + lm75@48 { + compatible = "nxp,lm75"; + reg = <0x48>; + }; +}; + diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml new file mode 100644 index 0000000000..70fb69b923 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C-Bus adapter for MPC824x/83xx/85xx/86xx/512x/52xx SoCs + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - mpc5200-i2c + - fsl,mpc5200-i2c + - fsl,mpc5121-i2c + - fsl,mpc8313-i2c + - fsl,mpc8543-i2c + - fsl,mpc8544-i2c + - const: fsl-i2c + - items: + - const: fsl,mpc5200b-i2c + - const: fsl,mpc5200-i2c + - const: fsl-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + fsl,preserve-clocking: + $ref: /schemas/types.yaml#/definitions/flag + description: | + if defined, the clock settings from the bootloader are + preserved (not touched) + + fsl,timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: | + I2C bus timeout in microseconds + + fsl,i2c-erratum-a004447: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Indicates the presence of QorIQ erratum A-004447, which + says that the standard i2c recovery scheme mechanism does + not work and an alternate implementation is needed. + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + /* MPC5121 based board */ + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1740 0x20>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <100000>; + }; + + - | + /* MPC5200B based board */ + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c", "fsl,mpc5200-i2c", "fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + interrupt-parent = <&mpc5200_pic>; + fsl,preserve-clocking; + }; + + - | + /* MPC8544 base board */ + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + clock-frequency = <400000>; + i2c-scl-clk-low-timeout-us = <10000>; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml new file mode 100644 index 0000000000..fda0467cdd --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mt65xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek I2C controller + +description: + This driver interfaces with the native I2C controller present in + various MediaTek SoCs. + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +maintainers: + - Qii Wang <qii.wang@mediatek.com> + +properties: + compatible: + oneOf: + - const: mediatek,mt2712-i2c + - const: mediatek,mt6577-i2c + - const: mediatek,mt6589-i2c + - const: mediatek,mt7622-i2c + - const: mediatek,mt7981-i2c + - const: mediatek,mt7986-i2c + - const: mediatek,mt8168-i2c + - const: mediatek,mt8173-i2c + - const: mediatek,mt8183-i2c + - const: mediatek,mt8186-i2c + - const: mediatek,mt8188-i2c + - const: mediatek,mt8192-i2c + - items: + - enum: + - mediatek,mt7629-i2c + - mediatek,mt8516-i2c + - const: mediatek,mt2712-i2c + - items: + - enum: + - mediatek,mt2701-i2c + - mediatek,mt6797-i2c + - mediatek,mt7623-i2c + - const: mediatek,mt6577-i2c + - items: + - enum: + - mediatek,mt8365-i2c + - const: mediatek,mt8168-i2c + - items: + - enum: + - mediatek,mt6795-i2c + - const: mediatek,mt8173-i2c + - items: + - enum: + - mediatek,mt8195-i2c + - const: mediatek,mt8192-i2c + + reg: + items: + - description: Physical base address + - description: DMA base address + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + items: + - description: Main clock for I2C bus + - description: Clock for I2C via DMA + - description: Bus arbitrator clock + - description: Clock for I2C from PMIC + + clock-names: + minItems: 2 + items: + - const: main + - const: dma + - const: arb + - const: pmic + + clock-div: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Frequency divider of clock source in I2C module + + clock-frequency: + default: 100000 + description: + SCL frequency to use (in Hz). If omitted, 100kHz is used. + + mediatek,have-pmic: + description: Platform controls I2C from PMIC side + type: boolean + + mediatek,use-push-pull: + description: Use push-pull mode I/O config + type: boolean + + vbus-supply: + description: Phandle to the regulator providing power to SCL/SDA + +required: + - compatible + - reg + - clocks + - clock-names + - clock-div + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0: i2c@1100d000 { + compatible = "mediatek,mt6577-i2c"; + reg = <0x1100d000 0x70>, <0x11000300 0x80>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; + clocks = <&i2c0_ck>, <&ap_dma_ck>; + clock-names = "main", "dma"; + clock-div = <16>; + clock-frequency = <400000>; + mediatek,have-pmic; + + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml new file mode 100644 index 0000000000..f34cc7ad5a --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO-based I2C Bus Mux + +maintainers: + - Wolfram Sang <wsa@kernel.org> + +description: | + This binding describes an I2C bus multiplexer that uses GPIOs to route the I2C signals. + + +-----+ +-----+ + | dev | | dev | + +------------+ +-----+ +-----+ + | SoC | | | + | | /--------+--------+ + | +------+ | +------+ child bus A, on GPIO value set to 0 + | | I2C |-|--| Mux | + | +------+ | +--+---+ child bus B, on GPIO value set to 1 + | | | \----------+--------+--------+ + | +------+ | | | | | + | | GPIO |-|-----+ +-----+ +-----+ +-----+ + | +------+ | | dev | | dev | | dev | + +------------+ +-----+ +-----+ +-----+ + + For each I2C child node, an I2C child bus will be created. They will be numbered based on their + order in the device tree. + + Whenever an access is made to a device on a child bus, the value set in the relevant node's reg + property will be output using the list of GPIOs, the first in the list holding the least- + significant value. + + If an idle state is defined, using the idle-state (optional) property, whenever an access is not + being made to a device on a child bus, the GPIOs will be set according to the idle value. + + If an idle state is not defined, the most recently used value will be left programmed into + hardware whenever no access is being made to a device on a child bus. + +properties: + compatible: + const: i2c-mux-gpio + + i2c-parent: + description: phandle of the I2C bus that this multiplexer's master-side port is connected to + $ref: /schemas/types.yaml#/definitions/phandle + + mux-gpios: + description: list of GPIOs used to control the muxer + minItems: 1 + maxItems: 4 # Should be enough + + idle-state: + description: Value to set the muxer to when idle. When no value is given, it defaults to the + last value used. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: i2c-mux.yaml + +unevaluatedProperties: false + +required: + - compatible + - i2c-parent + - mux-gpios + +examples: + - | + i2cmux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio1 22 0>, <&gpio1 23 0>; + i2c-parent = <&i2c1>; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ssd1307: oled@3c { + compatible = "solomon,ssd1307fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7 1>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555: pca9555@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml new file mode 100644 index 0000000000..b6af924dee --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux-gpmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: General Purpose I2C Bus Mux + +maintainers: + - Peter Rosin <peda@axentia.se> + +description: |+ + This binding describes an I2C bus multiplexer that uses a mux controller + from the mux subsystem to route the I2C signals. + + .-----. .-----. + | dev | | dev | + .------------. '-----' '-----' + | SoC | | | + | | .--------+--------' + | .------. | .------+ child bus A, on MUX value set to 0 + | | I2C |-|--| Mux | + | '------' | '--+---+ child bus B, on MUX value set to 1 + | .------. | | '----------+--------+--------. + | | MUX- | | | | | | + | | Ctrl |-|-----+ .-----. .-----. .-----. + | '------' | | dev | | dev | | dev | + '------------' '-----' '-----' '-----' + + +allOf: + - $ref: /schemas/i2c/i2c-mux.yaml# + +properties: + compatible: + const: i2c-mux + + i2c-parent: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the I2C bus that this multiplexer's master-side port is + connected to. + + mux-controls: + maxItems: 1 + description: + The mux-controller states are the I2C sub-bus numbers. + + mux-locked: + type: boolean + description: | + Explicitly allow unrelated I2C transactions on the parent I2C adapter at + these times: + - during setup of the multiplexer + - between setup of the multiplexer and the child bus I2C transaction + - between the child bus I2C transaction and releasing of the multiplexer + - during releasing of the multiplexer + + However, I2C transactions to devices behind all I2C multiplexers connected + to the same parent adapter that this multiplexer is connected to are blocked + for the full duration of the complete multiplexed I2C transaction (i.e. + including the times covered by the above list). + If mux-locked is not present, the multiplexer is assumed to be parent-locked. + This means that no unrelated I2C transactions are allowed on the parent I2C + adapter for the complete multiplexed I2C transaction. + The properties of mux-locked and parent-locked multiplexers are discussed + in more detail in Documentation/i2c/i2c-topology.rst. + +required: + - compatible + - i2c-parent + - mux-controls + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, + <&pioA 1 GPIO_ACTIVE_HIGH>; + }; + + i2c-mux { + compatible = "i2c-mux"; + mux-locked; + i2c-parent = <&i2c1>; + + mux-controls = <&mux>; + + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt new file mode 100644 index 0000000000..29c4550c97 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt @@ -0,0 +1,61 @@ +* Linear Technology / Analog Devices I2C bus switch + +Required Properties: + + - compatible: Must contain one of the following. + "lltc,ltc4305", "lltc,ltc4306" + - reg: The I2C address of the device. + + The following required properties are defined externally: + + - Standard I2C mux properties. See i2c-mux.yaml in this directory. + - I2C child bus nodes. See i2c-mux.yaml in this directory. + +Optional Properties: + + - enable-gpios: Reference to the GPIO connected to the enable input. + - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all + children in idle state. This is necessary for example, if there are several + multiplexers on the bus and the devices behind them use same I2C addresses. + - gpio-controller: Marks the device node as a GPIO Controller. + - #gpio-cells: Should be two. The first cell is the pin number and + the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + - ltc,downstream-accelerators-enable: Enables the rise time accelerators + on the downstream port. + - ltc,upstream-accelerators-enable: Enables the rise time accelerators + on the upstream port. + +Example: + + ltc4306: i2c-mux@4a { + compatible = "lltc,ltc4306"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4a>; + + gpio-controller; + #gpio-cells = <2>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml new file mode 100644 index 0000000000..2d7bb998b0 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PCA954x I2C and compatible bus switches + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: + The NXP PCA954x and compatible devices are I2C bus + multiplexer/switches that share the same functionality + and register layout. + The devices usually have 4 or 8 child buses, which are + attached to the parent bus by using the SMBus "Send Byte" + command. + +properties: + compatible: + oneOf: + - enum: + - maxim,max7356 + - maxim,max7357 + - maxim,max7358 + - maxim,max7367 + - maxim,max7368 + - maxim,max7369 + - nxp,pca9540 + - nxp,pca9542 + - nxp,pca9543 + - nxp,pca9544 + - nxp,pca9545 + - nxp,pca9546 + - nxp,pca9547 + - nxp,pca9548 + - nxp,pca9846 + - nxp,pca9847 + - nxp,pca9848 + - nxp,pca9849 + - items: + - const: nxp,pca9646 + - const: nxp,pca9546 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + reset-gpios: + maxItems: 1 + + i2c-mux-idle-disconnect: + type: boolean + description: Forces mux to disconnect all children in idle state. This is + necessary for example, if there are several multiplexers on the bus and + the devices behind them use same I2C addresses. + + idle-state: + description: if present, overrides i2c-mux-idle-disconnect + $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state + + vdd-supply: + description: A voltage regulator supplying power to the chip. On PCA9846 + the regulator supplies power to VDD2 (core logic) and optionally to VDD1. + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/i2c/i2c-mux.yaml# + - if: + not: + properties: + compatible: + contains: + enum: + - maxim,max7367 + - maxim,max7369 + - nxp,pca9542 + - nxp,pca9543 + - nxp,pca9544 + - nxp,pca9545 + then: + properties: + interrupts: false + "#interrupt-cells": false + interrupt-controller: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c-mux@74 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + vdd-supply = <&p3v3>; + + interrupt-parent = <&ipic>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml new file mode 100644 index 0000000000..2e3d555eb9 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Pinctrl-based I2C Bus Mux + +maintainers: + - Wolfram Sang <wsa@kernel.org> + +description: | + This binding describes an I2C bus multiplexer that uses pin multiplexing to route the I2C + signals, and represents the pin multiplexing configuration using the pinctrl device tree + bindings. + + +-----+ +-----+ + | dev | | dev | + +------------------------+ +-----+ +-----+ + | SoC | | | + | /----|------+--------+ + | +---+ +------+ | child bus A, on first set of pins + | |I2C|---|Pinmux| | + | +---+ +------+ | child bus B, on second set of pins + | \----|------+--------+--------+ + | | | | | + +------------------------+ +-----+ +-----+ +-----+ + | dev | | dev | | dev | + +-----+ +-----+ +-----+ + + For each named state defined in the pinctrl-names property, an I2C child bus will be created. + I2C child bus numbers are assigned based on the index into the pinctrl-names property. + + The only exception is that no bus will be created for a state named "idle". If such a state is + defined, it must be the last entry in pinctrl-names. For example: + + pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1 + pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last) + pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last) + + Whenever an access is made to a device on a child bus, the relevant pinctrl state will be + programmed into hardware. + + If an idle state is defined, whenever an access is not being made to a device on a child bus, + the idle pinctrl state will be programmed into hardware. + + If an idle state is not defined, the most recently used pinctrl state will be left programmed + into hardware whenever no access is being made of a device on a child bus. + +properties: + compatible: + const: i2c-mux-pinctrl + + i2c-parent: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the I2C bus that this multiplexer's master-side port is connected + to. + +allOf: + - $ref: i2c-mux.yaml + +unevaluatedProperties: false + +required: + - compatible + - i2c-parent + +examples: + - | + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&i2c1>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt new file mode 100644 index 0000000000..b9d9755e41 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt @@ -0,0 +1,74 @@ +Register-based I2C Bus Mux + +This binding describes an I2C bus multiplexer that uses a single register +to route the I2C signals. + +Required properties: +- compatible: i2c-mux-reg +- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side + port is connected to. +* Standard I2C mux properties. See i2c-mux.yaml in this directory. +* I2C child bus nodes. See i2c-mux.yaml in this directory. + +Optional properties: +- reg: this pair of <offset size> specifies the register to control the mux. + The <offset size> depends on its parent node. It can be any memory-mapped + address. The size must be either 1, 2, or 4 bytes. If reg is omitted, the + resource of this device will be used. +- little-endian: The existence indicates the register is in little endian. +- big-endian: The existence indicates the register is in big endian. + If both little-endian and big-endian are omitted, the endianness of the + CPU will be used. +- write-only: The existence indicates the register is write-only. +- idle-state: value to set the muxer to when idle. When no value is + given, it defaults to the last value used. + +Whenever an access is made to a device on a child bus, the value set +in the relevant node's reg property will be output to the register. + +If an idle state is defined, using the idle-state (optional) property, +whenever an access is not being made to a device on a child bus, the +register will be set according to the idle value. + +If an idle state is not defined, the most recently used value will be +left programmed into the register. + +Example of a mux on PCIe card, the host is a powerpc SoC (big endian): + + i2c-mux { + /* the <offset size> depends on the address translation + * of the parent device. If omitted, device resource + * will be used instead. The size is to determine + * whether iowrite32, iowrite16, or iowrite8 will be used. + */ + reg = <0x6028 0x4>; + little-endian; /* little endian register on PCIe */ + compatible = "i2c-mux-reg"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c1>; + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + si5338: clock-generator@70 { + compatible = "silabs,si5338"; + reg = <0x70>; + /* other stuff */ + }; + }; + + i2c@1 { + /* data is written using iowrite32 */ + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + si5338: clock-generator@70 { + compatible = "silabs,si5338"; + reg = <0x70>; + /* other stuff */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml new file mode 100644 index 0000000000..24cac36037 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common i2c bus multiplexer/switch properties. + +maintainers: + - Peter Rosin <peda@axentia.se> + +description: |+ + An i2c bus multiplexer/switch will have several child busses that are numbered + uniquely in a device dependent manner. The nodes for an i2c bus + multiplexer/switch will have one child node for each child bus. + + For i2c multiplexers/switches that have child nodes that are a mixture of both + i2c child busses and other child nodes, the 'i2c-mux' subnode can be used for + populating the i2c child busses. If an 'i2c-mux' subnode is present, only + subnodes of this will be considered as i2c child busses. + +properties: + $nodename: + pattern: '^(i2c-?)?mux' + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^i2c@[0-9a-f]+$': + $ref: /schemas/i2c/i2c-controller.yaml + unevaluatedProperties: false + + properties: + reg: + description: The mux selector sub-bus number for the child I2C bus. + maxItems: 1 + +additionalProperties: true + +examples: + - | + /* + * An NXP pca9548 8 channel I2C multiplexer at address 0x70 + * with two NXP pca8574 GPIO expanders attached, one each to + * ports 3 and 4. + */ + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml new file mode 100644 index 0000000000..171a414072 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mxs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS Inter IC (I2C) Controller + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - fsl,imx23-i2c + - fsl,imx28-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-frequency: + enum: [ 100000, 400000 ] + + dmas: + maxItems: 1 + + dma-names: + const: rx-tx + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + +unevaluatedProperties: false + +examples: + - | + i2c@80058000 { + compatible = "fsl,imx28-i2c"; + reg = <0x80058000 2000>; + interrupts = <111>; + clock-frequency = <100000>; + dmas = <&dma_apbx 6>; + dma-names = "rx-tx"; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-octeon.txt b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt new file mode 100644 index 0000000000..872d485dff --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt @@ -0,0 +1,40 @@ +* Two Wire Serial Interface (TWSI) / I2C + +- compatible: "cavium,octeon-3860-twsi" + + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. + + or + + compatible: "cavium,octeon-7890-twsi" + + Compatibility with cn78XX SOCs. + +- reg: The base address of the TWSI/I2C bus controller register bank. + +- #address-cells: Must be <1>. + +- #size-cells: Must be <0>. I2C addresses have no size component. + +- interrupts: A single interrupt specifier. + +- clock-frequency: The I2C bus clock rate in Hz. + +Example: + twsi0: i2c@1180000001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cavium,octeon-3860-twsi"; + reg = <0x11800 0x00001000 0x0 0x200>; + interrupts = <0 45>; + clock-frequency = <100000>; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + tmp@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-opal.txt b/Documentation/devicetree/bindings/i2c/i2c-opal.txt new file mode 100644 index 0000000000..12bc61465e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-opal.txt @@ -0,0 +1,37 @@ +Device-tree bindings for I2C OPAL driver +---------------------------------------- + +Most of the device node and properties layout is specific to the firmware and +used by the firmware itself for configuring the port. From the linux +perspective, the properties of use are "ibm,port-name" and "ibm,opal-id". + +Required properties: + +- reg: Port-id within a given master +- compatible: must be "ibm,opal-i2c" +- ibm,opal-id: Refers to a specific bus and used to identify it when calling + the relevant OPAL functions. +- bus-frequency: Operating frequency of the i2c bus (in HZ). Informational for + linux, used by the FW though. + +Optional properties: +- ibm,port-name: Firmware provides this name that uniquely identifies the i2c + port. + +The node contains a number of other properties that are used by the FW itself +and depend on the specific hardware implementation. The example below depicts +a P8 on-chip bus. + +Example: + +i2c-bus@0 { + reg = <0x0>; + bus-frequency = <0x61a80>; + compatible = "ibm,power8-i2c-port", "ibm,opal-i2c"; + ibm,opal-id = <0x1>; + ibm,port-name = "p8_00000000_e1p0"; + #address-cells = <0x1>; + phandle = <0x10000006>; + #size-cells = <0x0>; + linux,phandle = <0x10000006>; +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-owl.yaml b/Documentation/devicetree/bindings/i2c/i2c-owl.yaml new file mode 100644 index 0000000000..d96908badf --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-owl.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-owl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi Owl I2C Controller + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: | + This I2C controller is found in the Actions Semi Owl SoCs: + S500, S700 and S900. + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - actions,s500-i2c # Actions Semi S500 compatible SoCs + - actions,s700-i2c # Actions Semi S700 compatible SoCs + - actions,s900-i2c # Actions Semi S900 compatible SoCs + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: Phandle of the clock feeding the I2C controller. + minItems: 1 + + clock-frequency: + description: | + Desired I2C bus clock frequency in Hz. As only Standard and Fast + modes are supported, possible values are 100000 and 400000. + enum: [100000, 400000] + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/actions,s900-cmu.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c@e0170000 { + compatible = "actions,s900-i2c"; + reg = <0xe0170000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_I2C0>; + clock-frequency = <100000>; + }; + +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt new file mode 100644 index 0000000000..73a693d66e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt @@ -0,0 +1,27 @@ +* NXP PCA PCA9564/PCA9665 I2C controller + +The PCA9564/PCA9665 serves as an interface between most standard +parallel-bus microcontrollers/microprocessors and the serial I2C-bus +and allows the parallel bus system to communicate bi-directionally +with the I2C-bus. + +Required properties : + + - reg : Offset and length of the register set for the device + - compatible : one of "nxp,pca9564" or "nxp,pca9665" + +Optional properties + - interrupts : the interrupt number + - reset-gpios : gpio specifier for gpio connected to RESET_N pin. As the line + is active low, it should be marked GPIO_ACTIVE_LOW. + - clock-frequency : I2C bus frequency. + +Example: + i2c0: i2c@80000 { + compatible = "nxp,pca9564"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x80000 0x4>; + reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-pnx.txt b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt new file mode 100644 index 0000000000..2a59006cf7 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt @@ -0,0 +1,34 @@ +* NXP PNX I2C Controller + +Required properties: + + - reg: Offset and length of the register set for the device + - compatible: should be "nxp,pnx-i2c" + - interrupts: configure one interrupt line + - #address-cells: always 1 (for i2c addresses) + - #size-cells: always 0 + +Optional properties: + + - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz + +Examples: + + i2c1: i2c@400a0000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400a0000 0x100>; + interrupt-parent = <&mic>; + interrupts = <51 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@400a8000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400a8000 0x100>; + interrupt-parent = <&mic>; + interrupts = <50 0>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt new file mode 100644 index 0000000000..1ff6f8487a --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt @@ -0,0 +1,93 @@ +CE4100 I2C +---------- + +CE4100 has one PCI device which is described as the I2C-Controller. This +PCI device has three PCI-bars, each bar contains a complete I2C +controller. So we have a total of three independent I2C-Controllers +which share only an interrupt line. +The driver is probed via the PCI-ID and is gathering the information of +attached devices from the devices tree. +Grant Likely recommended to use the ranges property to map the PCI-Bar +number to its physical address and to use this to find the child nodes +of the specific I2C controller. This were his exact words: + + Here's where the magic happens. Each entry in + ranges describes how the parent pci address space + (middle group of 3) is translated to the local + address space (first group of 2) and the size of + each range (last cell). In this particular case, + the first cell of the local address is chosen to be + 1:1 mapped to the BARs, and the second is the + offset from be base of the BAR (which would be + non-zero if you had 2 or more devices mapped off + the same BAR) + + ranges allows the address mapping to be described + in a way that the OS can interpret without + requiring custom device driver code. + +This is an example which is used on FalconFalls: +------------------------------------------------ + i2c-controller@b,2 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "pci8086,2e68.2", + "pci8086,2e68", + "pciclass,ff0000", + "pciclass,ff00"; + + reg = <0x15a00 0x0 0x0 0x0 0x0>; + interrupts = <16 1>; + + /* as described by Grant, the first number in the group of + * three is the bar number followed by the 64bit bar address + * followed by size of the mapping. The bar address + * requires also a valid translation in parents ranges + * property. + */ + ranges = <0 0 0x02000000 0 0xdffe0500 0x100 + 1 0 0x02000000 0 0xdffe0600 0x100 + 2 0 0x02000000 0 0xdffe0700 0x100>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + + /* The first number in the reg property is the + * number of the bar + */ + reg = <0 0 0x100>; + + /* This I2C controller has no devices */ + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <1 0 0x100>; + + /* This I2C controller has one gpio controller */ + gpio@26 { + #gpio-cells = <2>; + compatible = "nxp,pcf8575"; + reg = <0x26>; + gpio-controller; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <2 0 0x100>; + + gpio@26 { + #gpio-cells = <2>; + compatible = "nxp,pcf8575"; + reg = <0x26>; + gpio-controller; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml new file mode 100644 index 0000000000..31386a8d76 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-pxa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP I2C controller + +maintainers: + - Rob Herring <robh+dt@kernel.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + not: + required: + - mrvl,i2c-polling + then: + required: + - interrupts + +properties: + compatible: + enum: + - mrvl,mmp-twsi + - mrvl,pxa-i2c + - marvell,armada-3700-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + + resets: + minItems: 1 + + mrvl,i2c-polling: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Disable interrupt of i2c controller. Polling status register of i2c + controller instead. + + mrvl,i2c-fast-mode: + $ref: /schemas/types.yaml#/definitions/flag + description: Enable fast mode of i2c controller. + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - '#address-cells' + - '#size-cells' + +examples: + - | + #include <dt-bindings/clock/marvell,mmp2.h> + i2c@d4011000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4011000 0x1000>; + interrupts = <7>; + clocks = <&soc_clocks MMP2_CLK_TWSI1>; + mrvl,i2c-fast-mode; + #address-cells = <1>; + #size-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml new file mode 100644 index 0000000000..82b9d66822 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-rk3x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3xxx I2C controller + +description: + This driver interfaces with the native I2C controller present in Rockchip + RK3xxx SoCs. + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +# Everything else is described in the common file +properties: + compatible: + oneOf: + - const: rockchip,rv1108-i2c + - const: rockchip,rk3066-i2c + - const: rockchip,rk3188-i2c + - const: rockchip,rk3228-i2c + - const: rockchip,rk3288-i2c + - const: rockchip,rk3399-i2c + - items: + - enum: + - rockchip,rk3036-i2c + - rockchip,rk3128-i2c + - rockchip,rk3368-i2c + - const: rockchip,rk3288-i2c + - items: + - enum: + - rockchip,px30-i2c + - rockchip,rk3308-i2c + - rockchip,rk3328-i2c + - rockchip,rk3568-i2c + - rockchip,rk3588-i2c + - rockchip,rv1126-i2c + - const: rockchip,rk3399-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: + For older hardware (rk3066, rk3188, rk3228, rk3288) + there is one clock that is used both to derive the functional clock + for the device and as the bus clock. + For newer hardware (rk3399) this clock is used to derive + the functional clock + - description: + For newer hardware (rk3399) this is the bus clock + + clock-names: + minItems: 1 + items: + - const: i2c + - const: pclk + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Required on RK3066, RK3188 the phandle of the syscon node for + the general register file (GRF) + On those SoCs an alias with the correct I2C bus ID + (bit offset in the GRF) is also required. + + clock-frequency: + default: 100000 + description: + SCL frequency to use (in Hz). If omitted, 100kHz is used. + + i2c-scl-rising-time-ns: + default: 1000 + description: + Number of nanoseconds the SCL signal takes to rise + (t(r) in I2C specification). If not specified this is assumed to be + the maximum the specification allows(1000 ns for Standard-mode, + 300 ns for Fast-mode) which might cause slightly slower communication. + + i2c-scl-falling-time-ns: + default: 300 + description: + Number of nanoseconds the SCL signal takes to fall + (t(f) in the I2C specification). If not specified this is assumed to + be the maximum the specification allows (300 ns) which might cause + slightly slower communication. + + i2c-sda-falling-time-ns: + default: 300 + description: + Number of nanoseconds the SDA signal takes to fall + (t(f) in the I2C specification). If not specified we will use the SCL + value since they are the same in nearly all cases. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +if: + properties: + compatible: + contains: + enum: + - rockchip,rk3066-i2c + - rockchip,rk3188-i2c + +then: + required: + - rockchip,grf + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3188-cru-common.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0: i2c@2002d000 { + compatible = "rockchip,rk3188-i2c"; + reg = <0x2002d000 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_I2C0>; + clock-names = "i2c"; + rockchip,grf = <&grf>; + i2c-scl-falling-time-ns = <100>; + i2c-scl-rising-time-ns = <800>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt new file mode 100644 index 0000000000..7b6b3b8d0d --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt @@ -0,0 +1,31 @@ +I2C for Spreadtrum platforms + +Required properties: +- compatible: Should be "sprd,sc9860-i2c". +- reg: Specify the physical base address of the controller and length + of memory mapped region. +- interrupts: Should contain I2C interrupt. +- clock-names: Should contain following entries: + "i2c" for I2C clock, + "source" for I2C source (parent) clock, + "enable" for I2C module enable clock. +- clocks: Should contain a clock specifier for each entry in clock-names. +- clock-frequency: Contains desired I2C bus clock frequency in Hz. +- #address-cells: Should be 1 to describe address cells for I2C device address. +- #size-cells: Should be 0 means no size cell for I2C device address. + +Optional properties: +- Child nodes conforming to I2C bus binding + +Examples: +i2c0: i2c@70500000 { + compatible = "sprd,sc9860-i2c"; + reg = <0 0x70500000 0 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c", "source", "enable"; + clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; +}; + diff --git a/Documentation/devicetree/bindings/i2c/i2c-virtio.yaml b/Documentation/devicetree/bindings/i2c/i2c-virtio.yaml new file mode 100644 index 0000000000..7d87ed8553 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-virtio.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-virtio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Virtio I2C Adapter + +maintainers: + - Viresh Kumar <viresh.kumar@linaro.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - $ref: /schemas/virtio/virtio-device.yaml# + +description: + Virtio I2C device, see /schemas/virtio/virtio-device.yaml for more details. + +properties: + $nodename: + const: i2c + + compatible: + const: virtio,device22 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + virtio@3000 { + compatible = "virtio,mmio"; + reg = <0x3000 0x100>; + interrupts = <41>; + + i2c { + compatible = "virtio,device22"; + + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@20 { + compatible = "dynaimage,al3320a"; + reg = <0x20>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-wmt.txt b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt new file mode 100644 index 0000000000..94a425eaa6 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt @@ -0,0 +1,24 @@ +* Wondermedia I2C Controller + +Required properties : + + - compatible : should be "wm,wm8505-i2c" + - reg : Offset and length of the register set for the device + - interrupts : <IRQ> where IRQ is the interrupt number + - clocks : phandle to the I2C clock source + +Optional properties : + + - clock-frequency : desired I2C bus clock frequency in Hz. + Valid values are 100000 and 400000. + Default to 100000 if not specified, or invalid value. + +Example : + + i2c_0: i2c@d8280000 { + compatible = "wm,wm8505-i2c"; + reg = <0xd8280000 0x1000>; + interrupts = <19>; + clocks = <&clki2c0>; + clock-frequency = <400000>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt b/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt new file mode 100644 index 0000000000..f6b2c20cfb --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt @@ -0,0 +1,15 @@ +APM X-Gene SLIMpro Mailbox I2C Driver + +An I2C controller accessed over the "SLIMpro" mailbox. + +Required properties : + + - compatible : should be "apm,xgene-slimpro-i2c" + - mboxes : use the label reference for the mailbox as the first parameter. + The second parameter is the channel number. + +Example : + i2cslimpro { + compatible = "apm,xgene-slimpro-i2c"; + mboxes = <&mailbox 0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt new file mode 100644 index 0000000000..fc3dd7ec04 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -0,0 +1,151 @@ +Generic device tree bindings for I2C busses +=========================================== + +This document describes generic bindings which can be used to describe I2C +busses and their child devices in a device tree. + +Required properties (per bus) +----------------------------- + +- #address-cells - should be <1>. Read more about addresses below. +- #size-cells - should be <0>. +- compatible - name of I2C bus controller + +For other required properties e.g. to describe register sets, +clocks, etc. check the binding documentation of the specific driver. + +The cells properties above define that an address of children of an I2C bus +are described by a single value. + +Optional properties (per bus) +----------------------------- + +These properties may not be supported by all drivers. However, if a driver +wants to support one of the below features, it should adapt these bindings. + +- clock-frequency + frequency of bus clock in Hz. + +- i2c-bus + For I2C adapters that have child nodes that are a mixture of both I2C + devices and non-I2C devices, the 'i2c-bus' subnode can be used for + populating I2C devices. If the 'i2c-bus' subnode is present, only + subnodes of this will be considered as I2C slaves. The properties, + '#address-cells' and '#size-cells' must be defined under this subnode + if present. + +- i2c-scl-falling-time-ns + Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C + specification. + +- i2c-scl-internal-delay-ns + Number of nanoseconds the IP core additionally needs to setup SCL. + +- i2c-scl-rising-time-ns + Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C + specification. + +- i2c-sda-falling-time-ns + Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C + specification. + +- i2c-analog-filter + Enable analog filter for i2c lines. + +- i2c-digital-filter + Enable digital filter for i2c lines. + +- i2c-digital-filter-width-ns + Width of spikes which can be filtered by digital filter + (i2c-digital-filter). This width is specified in nanoseconds. + +- i2c-analog-filter-cutoff-frequency + Frequency that the analog filter (i2c-analog-filter) uses to distinguish + which signal to filter. Signal with higher frequency than specified will + be filtered out. Only lower frequency will pass (this is applicable to + a low-pass analog filter). Typical value should be above the normal + i2c bus clock frequency (clock-frequency). + Specified in Hz. + +- multi-master + states that there is another master active on this bus. The OS can use + this information to adapt power management to keep the arbitration awake + all the time, for example. Can not be combined with 'single-master'. + +- pinctrl + add extra pinctrl to configure SCL/SDA pins to GPIO function for bus + recovery, call it "gpio" or "recovery" (deprecated) state + +- scl-gpios + specify the gpio related to SCL pin. Used for GPIO bus recovery. + +- sda-gpios + specify the gpio related to SDA pin. Optional for GPIO bus recovery. + +- single-master + states that there is no other master active on this bus. The OS can use + this information to detect a stalled bus more reliably, for example. + Can not be combined with 'multi-master'. + +- smbus + states that additional SMBus restrictions and features apply to this bus. + An example of feature is SMBusHostNotify. Examples of restrictions are + more reserved addresses and timeout definitions. + +- smbus-alert + states that the optional SMBus-Alert feature apply to this bus. + +- mctp-controller + indicates that the system is accessible via this bus as an endpoint for + MCTP over I2C transport. + +Required properties (per child device) +-------------------------------------- + +- compatible + name of I2C slave device + +- reg + One or many I2C slave addresses. These are usually a 7 bit addresses. + However, flags can be attached to an address. I2C_TEN_BIT_ADDRESS is + used to mark a 10 bit address. It is needed to avoid the ambiguity + between e.g. a 7 bit address of 0x50 and a 10 bit address of 0x050 + which, in theory, can be on the same bus. + Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we + listen to be devices ourselves. + +Optional properties (per child device) +-------------------------------------- + +These properties may not be supported by all drivers. However, if a driver +wants to support one of the below features, it should adapt these bindings. + +- host-notify + device uses SMBus host notify protocol instead of interrupt line. + +- interrupts + interrupts used by the device. + +- interrupt-names + "irq", "wakeup" and "smbus_alert" names are recognized by I2C core, + other names are left to individual drivers. + +- reg-names + Names of map programmable addresses. + It can contain any map needing another address than default one. + +- wakeup-source + device can be used as a wakeup source. + +Binding may contain optional "interrupts" property, describing interrupts +used by the device. I2C core will assign "irq" interrupt (or the very first +interrupt if not using interrupt names) as primary interrupt for the slave. + +Alternatively, devices supporting SMBus Host Notify, and connected to +adapters that support this feature, may use "host-notify" property. I2C +core will create a virtual interrupt for Host Notify and assign it as +primary interrupt for the slave. + +Also, if device is marked as a wakeup source, I2C core will set up "wakeup" +interrupt for the device. If "wakeup" interrupt name is not present in the +binding, then primary interrupt will be used as wakeup interrupt. diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml new file mode 100644 index 0000000000..b61fdc9548 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/ingenic,i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs I2C controller + +maintainers: + - Paul Cercueil <paul@crapouillou.net> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + $nodename: + pattern: "^i2c@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - ingenic,jz4770-i2c + - ingenic,x1000-i2c + - items: + - const: ingenic,jz4780-i2c + - const: ingenic,jz4770-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + enum: [ 100000, 400000 ] + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-frequency + - dmas + - dma-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/ingenic,jz4780-cgu.h> + #include <dt-bindings/dma/jz4780-dma.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c@10054000 { + compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10054000 0x1000>; + + interrupts = <56 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&cgu JZ4780_CLK_SMB4>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c4_data>; + + dmas = <&dma JZ4780_DMA_SMB4_RX 0xffffffff>, + <&dma JZ4780_DMA_SMB4_TX 0xffffffff>; + dma-names = "rx", "tx"; + + clock-frequency = <400000>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml b/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml new file mode 100644 index 0000000000..67882ec6e0 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/loongson,ls2x-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson LS2X I2C Controller + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - loongson,ls2k-i2c + - loongson,ls7a-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0: i2c@1fe21000 { + compatible = "loongson,ls2k-i2c"; + reg = <0x1fe21000 0x8>; + interrupt-parent = <&extioiic>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@57 { + compatible = "atmel,24c16"; + reg = <0x57>; + pagesize = <16>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml new file mode 100644 index 0000000000..984fc1ed3e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/marvell,mv64xxx-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MV64XXX I2C Controller + +maintainers: + - Gregory CLEMENT <gregory.clement@bootlin.com> + +properties: + compatible: + oneOf: + - const: allwinner,sun4i-a10-i2c + - items: + - const: allwinner,sun7i-a20-i2c + - const: allwinner,sun4i-a10-i2c + - const: allwinner,sun6i-a31-i2c + - items: + - enum: + - allwinner,suniv-f1c100s-i2c + - allwinner,sun8i-a23-i2c + - allwinner,sun8i-a83t-i2c + - allwinner,sun8i-v536-i2c + - allwinner,sun50i-a64-i2c + - allwinner,sun50i-h6-i2c + - const: allwinner,sun6i-a31-i2c + - description: Allwinner SoCs with offload support + items: + - enum: + - allwinner,sun20i-d1-i2c + - allwinner,sun50i-a100-i2c + - allwinner,sun50i-h616-i2c + - allwinner,sun50i-r329-i2c + - const: allwinner,sun8i-v536-i2c + - const: allwinner,sun6i-a31-i2c + - const: marvell,mv64xxx-i2c + - const: marvell,mv78230-i2c + - const: marvell,mv78230-a0-i2c + + description: + Only use "marvell,mv78230-a0-i2c" for a very rare, initial + version of the SoC which had broken offload support. Linux + auto-detects this and sets it appropriately. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: Reference clock for the I2C bus + - description: Bus clock (Only for Armada 7K/8K) + + clock-names: + minItems: 1 + items: + - const: core + - const: reg + description: + Mandatory if two clocks are used (only for Armada 7k and 8k). + + resets: + maxItems: 1 + + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + +dependencies: + dmas: [ dma-names ] + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-i2c + - allwinner,sun6i-a31-i2c + + then: + required: + - clocks + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-i2c + + then: + required: + - resets + +unevaluatedProperties: false + +examples: + - | + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + interrupts = <29>; + clock-frequency = <100000>; + }; + + - | + i2c@11000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x11000 0x100>; + interrupts = <29>; + clock-frequency = <100000>; + }; + + - | + i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + interrupts = <29>; + clock-frequency = <100000>; + clock-names = "core", "reg"; + clocks = <&core_clock>, <®_clock>; + }; + +... diff --git a/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml b/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml new file mode 100644 index 0000000000..118ec00fc1 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/mediatek,mt7621-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +maintainers: + - Stefan Roese <sr@denx.de> + +title: Mediatek MT7621/MT7628 I2C master controller + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: mediatek,mt7621-i2c + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: i2c + + resets: + maxItems: 1 + + reset-names: + const: i2c + +required: + - compatible + - reg + - resets + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt7621-clk.h> + #include <dt-bindings/reset/mt7621-reset.h> + + i2c: i2c@900 { + compatible = "mediatek,mt7621-i2c"; + reg = <0x900 0x100>; + clocks = <&sysc MT7621_CLK_I2C>; + clock-names = "i2c"; + resets = <&sysc MT7621_RST_I2C>; + reset-names = "i2c"; + + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + }; diff --git a/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml new file mode 100644 index 0000000000..afa3db7262 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/microchip,corei2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MPFS I2C Controller + +maintainers: + - Daire McNamara <daire.mcnamara@microchip.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - const: microchip,mpfs-i2c # Microchip PolarFire SoC compatible SoCs + - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core + - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + description: | + Desired I2C bus clock frequency in Hz. As only Standard and Fast + modes are supported, possible values are 100000 and 400000. + enum: [100000, 400000] + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + i2c@2010a000 { + compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; + reg = <0x2010a000 0x1000>; + clocks = <&clkcfg 15>; + interrupt-parent = <&plic>; + interrupts = <58>; + clock-frequency = <100000>; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml new file mode 100644 index 0000000000..00eb6ff6f5 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: nuvoton NPCM7XX I2C Controller + +description: | + I2C bus controllers of the NPCM series support both master and + slave mode. Each controller can switch between master and slave at run time + (i.e. IPMB mode). HW FIFO for TX and RX are supported. + +maintainers: + - Tali Perry <tali.perry1@gmail.com> + +properties: + compatible: + enum: + - nuvoton,npcm750-i2c + - nuvoton,npcm845-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: Reference clock for the I2C bus + + clock-frequency: + description: Desired I2C bus clock frequency in Hz. If not specified, + the default 100 kHz frequency will be used. + possible values are 100000, 400000 and 1000000. + default: 100000 + enum: [100000, 400000, 1000000] + + nuvoton,sys-mgr: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of system manager register node. + +required: + - compatible + - reg + - interrupts + - clocks + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + const: nuvoton,npcm845-i2c + + then: + required: + - nuvoton,sys-mgr + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c0: i2c@80000 { + reg = <0x80000 0x1000>; + clocks = <&clk NPCM7XX_CLK_APB2>; + clock-frequency = <100000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + compatible = "nuvoton,npcm750-i2c"; + nuvoton,sys-mgr = <&gcr>; + }; + +... diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml new file mode 100644 index 0000000000..b8319dcf3d --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/nvidia,tegra186-bpmp-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 (and later) BPMP I2C controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + In Tegra186 and later, the BPMP (Boot and Power Management Processor) + owns certain HW devices, such as the I2C controller for the power + management I2C bus. Software running on other CPUs must perform IPC to + the BPMP in order to execute transactions on that I2C bus. This + binding describes an I2C bus that is accessed in such a fashion. + + The BPMP I2C node must be located directly inside the main BPMP node. + See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP + binding. + + This node represents an I2C controller. See ../i2c/i2c.txt for details + of the core I2C binding. + +properties: + compatible: + const: nvidia,tegra186-bpmp-i2c + + nvidia,bpmp-bus-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Indicates the I2C bus number this DT node represents, + as defined by the BPMP firmware. + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - nvidia,bpmp-bus-id diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml new file mode 100644 index 0000000000..424a4fc218 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml @@ -0,0 +1,192 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/nvidia,tegra20-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +title: NVIDIA Tegra I2C controller driver + +properties: + compatible: + oneOf: + - description: Tegra20 has 4 generic I2C controller. This can support + master and slave mode of I2C communication. The i2c-tegra driver + only support master mode of I2C communication. Driver of I2C + controller is only compatible with "nvidia,tegra20-i2c". + const: nvidia,tegra20-i2c + - description: Tegra20 has specific I2C controller called as DVC I2C + controller. This only support master mode of I2C communication. + Register interface/offset and interrupts handling are different than + generic I2C controller. Driver of DVC I2C controller is only + compatible with "nvidia,tegra20-i2c-dvc". + const: nvidia,tegra20-i2c-dvc + - description: | + Tegra30 has 5 generic I2C controller. This controller is very much + similar to Tegra20 I2C controller with additional feature: Continue + Transfer Support. This feature helps to implement M_NO_START as per + I2C core API transfer flags. Driver of I2C controller is compatible + with "nvidia,tegra30-i2c" to enable the continue transfer support. + This is also compatible with "nvidia,tegra20-i2c" without continue + transfer support. + items: + - const: nvidia,tegra30-i2c + - const: nvidia,tegra20-i2c + - description: | + Tegra114 has 5 generic I2C controllers. This controller is very much + similar to Tegra30 I2C controller with some hardware modification: + - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk + and fast-clk. Tegra114 has only one clock source called as + div-clk and hence clock mechanism is changed in I2C controller. + - Tegra30/Tegra20 I2C controller has enabled per packet transfer + by default and there is no way to disable it. Tegra114 has this + interrupt disable by default and SW need to enable explicitly. + Due to above changes, Tegra114 I2C driver makes incompatible with + previous hardware driver. Hence, Tegra114 I2C controller is + compatible with "nvidia,tegra114-i2c". + const: nvidia,tegra114-i2c + - description: | + Tegra124 has 6 generic I2C controllers. These controllers are very + similar to those found on Tegra114 but also contain several hardware + improvements and new registers. + const: nvidia,tegra124-i2c + - description: | + Tegra210 has 6 generic I2C controllers. These controllers are very + similar to those found on Tegra124. + items: + - const: nvidia,tegra210-i2c + - const: nvidia,tegra124-i2c + - description: | + Tegra210 has one I2C controller that is on host1x bus and is part of + the VE power domain and typically used for camera use-cases. This VI + I2C controller is mostly compatible with the programming model of + the regular I2C controllers with a few exceptions. The I2C registers + start at an offset of 0xc00 (instead of 0), registers are 16 bytes + apart (rather than 4) and the controller does not support slave + mode. + const: nvidia,tegra210-i2c-vi + - description: | + Tegra186 has 9 generic I2C controllers, two of which are in the AON + (always-on) partition of the SoC. All of these controllers are very + similar to those found on Tegra210. + const: nvidia,tegra186-i2c + - description: | + Tegra194 has 8 generic I2C controllers, two of which are in the AON + (always-on) partition of the SoC. All of these controllers are very + similar to those found on Tegra186. However, these controllers have + support for 64 KiB transactions whereas earlier chips supported no + more than 4 KiB per transactions. + const: nvidia,tegra194-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + + resets: + items: + - description: module reset + + reset-names: + items: + - const: i2c + + dmas: + items: + - description: DMA channel for the reception FIFO + - description: DMA channel for the transmission FIFO + + dma-names: + items: + - const: rx + - const: tx + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra20-i2c + - nvidia,tegra30-i2c + then: + properties: + clock-names: + items: + - const: div-clk + - const: fast-clk + + - if: + properties: + compatible: + contains: + const: nvidia,tegra114-i2c + then: + properties: + clock-names: + items: + - const: div-clk + + - if: + properties: + compatible: + contains: + const: nvidia,tegra210-i2c + then: + properties: + clock-names: + items: + - const: div-clk + + - if: + properties: + compatible: + contains: + const: nvidia,tegra210-i2c-vi + then: + properties: + clock-names: + items: + - const: div-clk + - const: slow + power-domains: + items: + - description: phandle to the VENC power domain + +unevaluatedProperties: false + +examples: + - | + i2c@7000c000 { + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; + clocks = <&tegra_car 12>, <&tegra_car 124>; + clock-names = "div-clk", "fast-clk"; + resets = <&tegra_car 12>; + reset-names = "i2c"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/nxp,pca9541.yaml b/Documentation/devicetree/bindings/i2c/nxp,pca9541.yaml new file mode 100644 index 0000000000..b65c25c1a4 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nxp,pca9541.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/nxp,pca9541.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PCA9541 I2C bus master selector + +maintainers: + - Peter Rosin <peda@axentia.se> + +properties: + compatible: + const: nxp,pca9541 + + reg: + maxItems: 1 + + i2c-arb: + type: object + $ref: /schemas/i2c/i2c-controller.yaml + unevaluatedProperties: false + description: + I2C arbitration bus node. + +required: + - compatible + - reg + - i2c-arb + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c-arbitrator@74 { + compatible = "nxp,pca9541"; + reg = <0x74>; + + i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + + eeprom@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml new file mode 100644 index 0000000000..d9ef867290 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/opencores,i2c-ocores.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OpenCores I2C controller + +maintainers: + - Peter Korsgaard <peter@korsgaard.com> + - Andrew Lunn <andrew@lunn.ch> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - sifive,fu740-c000-i2c # Opencore based IP block FU740-C000 SoC + - sifive,fu540-c000-i2c # Opencore based IP block FU540-C000 SoC + - const: sifive,i2c0 + - enum: + - opencores,i2c-ocores + - aeroflexgaisler,i2cmst + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + description: | + clock-frequency property is meant to control the bus frequency for i2c bus + drivers, but it was incorrectly used to specify i2c controller input clock + frequency. So the following rules are set to fix this situation: + - if clock-frequency is present and neither opencores,ip-clock-frequency nor + clocks are, then clock-frequency specifies i2c controller clock frequency. + This is to keep backwards compatibility with setups using old DTB. i2c bus + frequency is fixed at 100 KHz. + - if clocks is present it specifies i2c controller clock. clock-frequency + property specifies i2c bus frequency. + - if opencores,ip-clock-frequency is present it specifies i2c controller + clock frequency. clock-frequency property specifies i2c bus frequency. + default: 100000 + + reg-io-width: + description: | + io register width in bytes + enum: [1, 2, 4] + + reg-shift: + description: | + device register offsets are shifted by this value + default: 0 + + regstep: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + deprecated, use reg-shift above + deprecated: true + + opencores,ip-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Frequency of the controller clock in Hz. Mutually exclusive with clocks. + See the note above. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +oneOf: + - required: + - opencores,ip-clock-frequency + - required: + - clocks + +unevaluatedProperties: false + +examples: + - | + i2c@a0000000 { + compatible = "opencores,i2c-ocores"; + reg = <0xa0000000 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <10>; + opencores,ip-clock-frequency = <20000000>; + + reg-shift = <0>; /* 8 bit registers */ + reg-io-width = <1>; /* 8 bit read/write */ + }; + + i2c@b0000000 { + compatible = "opencores,i2c-ocores"; + reg = <0xa0000000 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <10>; + clocks = <&osc>; + clock-frequency = <400000>; /* i2c bus frequency 400 KHz */ + + reg-shift = <0>; /* 8 bit registers */ + reg-io-width = <1>; /* 8 bit read/write */ + }; +... diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml new file mode 100644 index 0000000000..042d4dc636 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml @@ -0,0 +1,278 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/qcom,i2c-cci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Control Interface (CCI) I2C controller + +maintainers: + - Loic Poulain <loic.poulain@linaro.org> + - Robert Foss <robert.foss@linaro.org> + +properties: + compatible: + oneOf: + - enum: + - qcom,msm8226-cci + - qcom,msm8974-cci + - qcom,msm8996-cci + + - items: + - enum: + - qcom,msm8916-cci + - const: qcom,msm8226-cci # CCI v1 + + - items: + - enum: + - qcom,sdm845-cci + - qcom,sm6350-cci + - qcom,sm8250-cci + - qcom,sm8450-cci + - const: qcom,msm8996-cci # CCI v2 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + minItems: 3 + maxItems: 6 + + clock-names: + minItems: 3 + maxItems: 6 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^i2c-bus@[01]$": + $ref: /schemas/i2c/i2c-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + maxItems: 1 + + clock-frequency: + default: 100000 + +required: + - compatible + - clock-names + - clocks + - interrupts + - reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-cci + then: + required: + - power-domains + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8226-cci + - qcom,msm8916-cci + then: + properties: + i2c-bus@1: false + + - if: + properties: + compatible: + oneOf: + - contains: + enum: + - qcom,msm8974-cci + + - const: qcom,msm8226-cci + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: camss_top_ahb + - const: cci_ahb + - const: cci + + - if: + properties: + compatible: + oneOf: + - contains: + enum: + - qcom,msm8916-cci + + - const: qcom,msm8996-cci + then: + properties: + clocks: + maxItems: 4 + clock-names: + items: + - const: camss_top_ahb + - const: cci_ahb + - const: cci + - const: camss_ahb + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-cci + - qcom,sm6350-cci + then: + properties: + clocks: + minItems: 6 + clock-names: + items: + - const: camnoc_axi + - const: soc_ahb + - const: slow_ahb_src + - const: cpas_ahb + - const: cci + - const: cci_src + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8250-cci + - qcom,sm8450-cci + then: + properties: + clocks: + minItems: 5 + maxItems: 5 + clock-names: + items: + - const: camnoc_axi + - const: slow_ahb_src + - const: cpas_ahb + - const: cci + - const: cci_src + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,camcc-sdm845.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cci@ac4a000 { + reg = <0x0ac4a000 0x4000>; + compatible = "qcom,sdm845-cci", "qcom,msm8996-cci"; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + power-domains = <&clock_camcc TITAN_TOP_GDSC>; + + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CCI_CLK>, + <&clock_camcc CAM_CC_CCI_CLK_SRC>; + clock-names = "camnoc_axi", + "soc_ahb", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_CCI_CLK>; + assigned-clock-rates = <80000000>, + <37500000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + + i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + + camera@10 { + compatible = "ovti,ov8856"; + reg = <0x10>; + + reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_default>; + + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "xvclk"; + clock-frequency = <19200000>; + + dovdd-supply = <&vreg_lvs1a_1p8>; + avdd-supply = <&cam0_avdd_2v8>; + dvdd-supply = <&cam0_dvdd_1v2>; + + port { + ov8856_ep: endpoint { + link-frequencies = /bits/ 64 <360000000 180000000>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + + camera@60 { + compatible = "ovti,ov7251"; + reg = <0x60>; + + enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam3_default>; + + clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; + clock-names = "xclk"; + clock-frequency = <24000000>; + + vdddo-supply = <&vreg_lvs1a_1p8>; + vdda-supply = <&cam3_avdd_2v8>; + + port { + ov7251_ep: endpoint { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <240000000 319200000>; + remote-endpoint = <&csiphy3_ep>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml new file mode 100644 index 0000000000..9f66a3bb1f --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Geni based QUP I2C Controller + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +properties: + compatible: + enum: + - qcom,geni-i2c + - qcom,geni-i2c-master-hub + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + + clock-frequency: + default: 100000 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interconnects: + minItems: 2 + maxItems: 3 + + interconnect-names: + minItems: 2 + maxItems: 3 + + interrupts: + maxItems: 1 + + operating-points-v2: true + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + required-opps: + maxItems: 1 + +required: + - compatible + - interrupts + - clocks + - clock-names + - reg + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + const: qcom,geni-i2c-master-hub + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: se + - const: core + + dmas: false + dma-names: false + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + else: + properties: + clocks: + maxItems: 1 + + clock-names: + const: se + + interconnects: + minItems: 3 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + - const: qup-memory + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/interconnect/qcom,sc7180.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + i2c@88000 { + compatible = "qcom,geni-i2c"; + reg = <0x00880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml new file mode 100644 index 0000000000..f43947514d --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/qcom,i2c-qup.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Universal Peripheral (QUP) I2C controller + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - qcom,i2c-qup-v1.1.1 # for 8660, 8960 and 8064 + - qcom,i2c-qup-v2.1.1 # for 8974 v1 + - qcom,i2c-qup-v2.2.1 # for 8974 v2 and later + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: iface + + clock-frequency: + default: 100000 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + reg: + maxItems: 1 + +required: + - compatible + - clock-names + - clocks + - interrupts + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c@c175000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml new file mode 100644 index 0000000000..17c1102562 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/renesas,iic-emev2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas EMMA Mobile EV2 IIC Interface + +maintainers: + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: renesas,iic-emev2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: sclk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#address-cells' + - '#size-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + iic0: i2c@e0070000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-emev2"; + reg = <0xe0070000 0x28>; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + clocks = <&iic0_sclk>; + clock-names = "sclk"; + }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml new file mode 100644 index 0000000000..c4ace5585e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml @@ -0,0 +1,165 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/renesas,rcar-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car I2C Controller + +maintainers: + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,i2c-r8a7778 # R-Car M1A + - renesas,i2c-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-i2c # R-Car Gen1 + + - items: + - enum: + - renesas,i2c-r8a7742 # RZ/G1H + - renesas,i2c-r8a7743 # RZ/G1M + - renesas,i2c-r8a7744 # RZ/G1N + - renesas,i2c-r8a7745 # RZ/G1E + - renesas,i2c-r8a77470 # RZ/G1C + - renesas,i2c-r8a7790 # R-Car H2 + - renesas,i2c-r8a7791 # R-Car M2-W + - renesas,i2c-r8a7792 # R-Car V2H + - renesas,i2c-r8a7793 # R-Car M2-N + - renesas,i2c-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-i2c # R-Car Gen2 and RZ/G1 + + - items: + - enum: + - renesas,i2c-r8a774a1 # RZ/G2M + - renesas,i2c-r8a774b1 # RZ/G2N + - renesas,i2c-r8a774c0 # RZ/G2E + - renesas,i2c-r8a774e1 # RZ/G2H + - renesas,i2c-r8a7795 # R-Car H3 + - renesas,i2c-r8a7796 # R-Car M3-W + - renesas,i2c-r8a77961 # R-Car M3-W+ + - renesas,i2c-r8a77965 # R-Car M3-N + - renesas,i2c-r8a77970 # R-Car V3M + - renesas,i2c-r8a77980 # R-Car V3H + - renesas,i2c-r8a77990 # R-Car E3 + - renesas,i2c-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-i2c # R-Car Gen3 and RZ/G2 + + - items: + - enum: + - renesas,i2c-r8a779a0 # R-Car V3U + - renesas,i2c-r8a779f0 # R-Car S4-8 + - renesas,i2c-r8a779g0 # R-Car V4H + - const: renesas,rcar-gen4-i2c # R-Car Gen4 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-frequency: + description: + Desired I2C bus clock frequency in Hz. The absence of this property + indicates the default frequency 100 kHz. + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + minItems: 2 + maxItems: 4 + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + + i2c-scl-falling-time-ns: + default: 35 + description: + Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C + specification. + + i2c-scl-internal-delay-ns: + default: 50 + description: + Number of nanoseconds the IP core additionally needs to setup SCL. + + i2c-scl-rising-time-ns: + default: 200 + description: + Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C + specification. + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - '#address-cells' + - '#size-cells' + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + + - if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen1-i2c + - renesas,rcar-gen2-i2c + then: + properties: + dmas: false + dma-names: false + + - if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-i2c + - renesas,rcar-gen3-i2c + - renesas,rcar-gen4-i2c + then: + required: + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7791-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7791-sysc.h> + + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; + reg = <0xe6508000 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; + }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml new file mode 100644 index 0000000000..2291a7cd61 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/renesas,riic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/A and RZ/G2L I2C Bus Interface (RIIC) + +maintainers: + - Chris Brandt <chris.brandt@renesas.com> + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + items: + - enum: + - renesas,riic-r7s72100 # RZ/A1H + - renesas,riic-r7s9210 # RZ/A2M + - renesas,riic-r9a07g043 # RZ/G2UL and RZ/Five + - renesas,riic-r9a07g044 # RZ/G2{L,LC} + - renesas,riic-r9a07g054 # RZ/V2L + - const: renesas,riic-rz # RZ/A or RZ/G2L + + reg: + maxItems: 1 + + interrupts: + items: + - description: Transmit End Interrupt + - description: Receive Data Full Interrupt + - description: Transmit Data Empty Interrupt + - description: Stop Condition Detection Interrupt + - description: Start Condition Detection Interrupt + - description: NACK Reception Interrupt + - description: Arbitration-Lost Interrupt + - description: Timeout Interrupt + + interrupt-names: + items: + - const: tei + - const: ri + - const: ti + - const: spi + - const: sti + - const: naki + - const: ali + - const: tmoi + + clock-frequency: + description: + Desired I2C bus clock frequency in Hz. The absence of this property + indicates the default frequency 100 kHz. + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-frequency + - power-domains + - '#address-cells' + - '#size-cells' + +if: + properties: + compatible: + contains: + enum: + - renesas,riic-r9a07g043 + - renesas,riic-r9a07g044 + - renesas,riic-r9a07g054 +then: + required: + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r7s72100-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c0: i2c@fcfee000 { + compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; + reg = <0xfcfee000 0x44>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali", + "tmoi"; + clocks = <&mstp9_clks R7S72100_CLK_I2C0>; + clock-frequency = <100000>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml new file mode 100644 index 0000000000..04e4ffd80b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/renesas,rmobile-iic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Mobile I2C Bus Interface (IIC) + +maintainers: + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,iic-r8a73a4 # R-Mobile APE6 + - renesas,iic-r8a7740 # R-Mobile A1 + - renesas,iic-sh73a0 # SH-Mobile AG5 + - const: renesas,rmobile-iic # Generic + + - items: + - enum: + - renesas,iic-r8a7742 # RZ/G1H + - renesas,iic-r8a7743 # RZ/G1M + - renesas,iic-r8a7744 # RZ/G1N + - renesas,iic-r8a7745 # RZ/G1E + - renesas,iic-r8a7790 # R-Car H2 + - renesas,iic-r8a7791 # R-Car M2-W + - renesas,iic-r8a7792 # R-Car V2H + - renesas,iic-r8a7793 # R-Car M2-N + - renesas,iic-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-iic # R-Car Gen2 and RZ/G1 + - const: renesas,rmobile-iic # Generic + + - items: + - enum: + - renesas,iic-r8a774a1 # RZ/G2M + - renesas,iic-r8a774b1 # RZ/G2N + - renesas,iic-r8a774c0 # RZ/G2E + - renesas,iic-r8a774e1 # RZ/G2H + - renesas,iic-r8a7795 # R-Car H3 + - renesas,iic-r8a7796 # R-Car M3-W + - renesas,iic-r8a77961 # R-Car M3-W+ + - renesas,iic-r8a77965 # R-Car M3-N + - renesas,iic-r8a77990 # R-Car E3 + - const: renesas,rcar-gen3-iic # R-Car Gen3 and RZ/G2 + - const: renesas,rmobile-iic # Generic + + reg: + maxItems: 1 + + interrupts: true + + clock-frequency: + description: + Desired I2C bus clock frequency in Hz. The absence of this property + indicates the default frequency 100 kHz. + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + minItems: 2 + maxItems: 4 + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - '#address-cells' + - '#size-cells' + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + + - if: + properties: + compatible: + contains: + enum: + - renesas,iic-r8a7740 + - renesas,iic-sh73a0 + then: + properties: + interrupts: + items: + - description: Arbitration Lost Interrupt (ALI) + - description: Non-acknowledge Detection Interrupt (TACKI) + - description: Wait Interrupt (WAITI) + - description: Data Transmit Enable interrupt (DTEI) + else: + properties: + interrupts: + items: + - description: Single combined interrupt + + - if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-iic + - renesas,rcar-gen3-iic + then: + required: + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + + iic0: i2c@e6500000 { + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0xe6500000 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + clock-frequency = <400000>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 318>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml new file mode 100644 index 0000000000..5d1e7885b6 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/renesas,rzv2m.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M I2C Bus Interface + +maintainers: + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r9a09g011-i2c # RZ/V2M + - const: renesas,rzv2m-i2c + + reg: + maxItems: 1 + + interrupts: + items: + - description: Data transmission/reception interrupt + - description: Status interrupt + + interrupt-names: + items: + - const: tia + - const: tis + + clock-frequency: + default: 100000 + enum: [ 100000, 400000 ] + description: + Desired I2C bus clock frequency in Hz. + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - power-domains + - resets + - '#address-cells' + - '#size-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a09g011-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c0: i2c@a4030000 { + compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c"; + reg = <0xa4030000 0x80>; + interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "tia", "tis"; + clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK0>; + resets = <&cpg R9A09G011_IIC_GPA_PRESETN>; + power-domains = <&cpg>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml new file mode 100644 index 0000000000..b204e35e4f --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/samsung,s3c2410-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC I2C Controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,s3c2410-i2c + - samsung,s3c2440-i2c + # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs: + - samsung,s3c2440-hdmiphy-i2c + # For s3c2440-like I2C used as a host to SATA PHY controller on an + # internal bus: + - samsung,exynos5-sata-phy-i2c + + '#address-cells': + const: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: i2c + + gpios: + description: | + The order of the GPIOs should be the following:: <SDA, SCL>. The GPIO + specifier depends on the gpio controller. Required in all cases except + for "samsung,s3c2440-hdmiphy-i2c" whose input/output lines are + permanently wired to the respective client. + This property is deprecated. Use "pinctrl-0" and "pinctrl-names" instead. + deprecated: true + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + samsung,i2c-max-bus-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Desired frequency in Hz of the bus. + default: 100000 + + samsung,i2c-sda-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Delay (in ns) applied to data line (SDA) edges. + default: 0 + + samsung,i2c-slave-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Slave address in multi-master environment. + default: 0 + + samsung,sysreg-phandle: + $ref: /schemas/types.yaml#/definitions/phandle + description: Pandle to syscon used to control the system registers. + + '#size-cells': + const: 0 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - samsung,s3c2440-hdmiphy-i2c + - samsung,exynos5-sata-phy-i2c + then: + properties: + gpios: false + + - if: + properties: + compatible: + contains: + enum: + - samsung,s3c2410-i2c + - samsung,s3c2440-i2c + - samsung,s3c2440-hdmiphy-i2c + then: + required: + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5250.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c@12c60000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C60000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + samsung,i2c-slave-addr = <0x66>; + + eeprom@50 { + compatible = "samsung,s524ad0xd1", "atmel,24c128"; + reg = <0x50>; + }; + }; + + i2c@12ce0000 { + compatible = "samsung,s3c2440-hdmiphy-i2c"; + reg = <0x12CE0000 0x1000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C_HDMI>; + clock-names = "i2c"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + phy-i2c@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; + }; + + i2c@121d0000 { + compatible = "samsung,exynos5-sata-phy-i2c"; + reg = <0x121D0000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SATA_PHYI2C>; + clock-names = "i2c"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <40000>; + + phy-i2c@38 { + compatible = "samsung,exynos-sataphy-i2c"; + reg = <0x38>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml new file mode 100644 index 0000000000..d9293c57f5 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/snps,designware-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare APB I2C Controller + +maintainers: + - Jarkko Nikula <jarkko.nikula@linux.intel.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + not: + contains: + const: mscc,ocelot-i2c + then: + properties: + reg: + maxItems: 1 + +properties: + compatible: + oneOf: + - description: Generic Synopsys DesignWare I2C controller + const: snps,designware-i2c + - description: Microsemi Ocelot SoCs I2C controller + items: + - const: mscc,ocelot-i2c + - const: snps,designware-i2c + - description: Baikal-T1 SoC System I2C controller + const: baikal,bt1-sys-i2c + + reg: + minItems: 1 + items: + - description: DW APB I2C controller memory mapped registers + - description: | + ICPU_CFG:TWI_DELAY registers to setup the SDA hold time. + This registers are specific to the Ocelot I2C-controller. + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: I2C controller reference clock source + - description: APB interface clock source + + clock-names: + minItems: 1 + items: + - const: ref + - const: pclk + + resets: + maxItems: 1 + + clock-frequency: + description: Desired I2C bus clock frequency in Hz + enum: [100000, 400000, 1000000, 3400000] + default: 400000 + + i2c-sda-hold-time-ns: + description: | + The property should contain the SDA hold time in nanoseconds. This option + is only supported in hardware blocks version 1.11a or newer or on + Microsemi SoCs. + + i2c-scl-falling-time-ns: + description: | + The property should contain the SCL falling time in nanoseconds. + This value is used to compute the tLOW period. + default: 300 + + i2c-sda-falling-time-ns: + description: | + The property should contain the SDA falling time in nanoseconds. + This value is used to compute the tHIGH period. + default: 300 + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + i2c@f0000 { + compatible = "snps,designware-i2c"; + reg = <0xf0000 0x1000>; + interrupts = <11>; + clock-frequency = <400000>; + }; + - | + i2c@1120000 { + compatible = "snps,designware-i2c"; + reg = <0x1120000 0x1000>; + interrupts = <12 1>; + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <300>; + i2c-scl-falling-time-ns = <300>; + }; + - | + i2c@2000 { + compatible = "snps,designware-i2c"; + reg = <0x2000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <0>; + + eeprom@64 { + compatible = "atmel,24c02"; + reg = <0x64>; + }; + }; + - | + i2c@100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + reg = <0x100400 0x100>, <0x198 0x8>; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + interrupts = <8>; + clocks = <&ahb_clk>; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml new file mode 100644 index 0000000000..f9d6e2038b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/socionext,synquacer-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext SynQuacer I2C Controller + +maintainers: + - Ard Biesheuvel <ardb@kernel.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: socionext,synquacer-i2c + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: pclk + + clock-frequency: + minimum: 100000 + maximum: 400000 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c@51210000 { + compatible = "socionext,synquacer-i2c"; + reg = <0x51210000 0x1000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "pclk"; + clocks = <&clk_i2c>; + clock-frequency = <400000>; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml new file mode 100644 index 0000000000..4bbe9e775d --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/socionext,uniphier-fi2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier I2C controller (FIFO-builtin) + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: socionext,uniphier-fi2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + minimum: 100000 + maximum: 400000 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml new file mode 100644 index 0000000000..5abf496edb --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/socionext,uniphier-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier I2C controller (FIFO-less) + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: socionext,uniphier-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + minimum: 100000 + maximum: 400000 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + i2c0: i2c@58400000 { + compatible = "socionext,uniphier-i2c"; + reg = <0x58400000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 1>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml new file mode 100644 index 0000000000..16024415a4 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/st,nomadik-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST Microelectronics Nomadik I2C + +description: The Nomadik I2C host controller began its life in the ST + Microelectronics STn8800 SoC, and was then inherited into STn8810 and + STn8815. It was part of the prototype STn8500 which then became ST-Ericsson + DB8500 after the merge of these two companies wireless divisions. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + enum: + - st,nomadik-i2c + required: + - compatible + +properties: + compatible: + oneOf: + # The variant found in STn8815 + - items: + - const: st,nomadik-i2c + - const: arm,primecell + # The variant found in DB8500 + - items: + - const: stericsson,db8500-i2c + - const: st,nomadik-i2c + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + oneOf: + # Clock name in STn8815 + - items: + - const: mclk + - const: apb_pclk + # Clock name in DB8500 + - items: + - const: i2cclk + - const: apb_pclk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + clock-frequency: + minimum: 1 + maximum: 400000 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/stericsson,db8500-prcc-reset.h> + #include <dt-bindings/arm/ux500_pm_domains.h> + i2c@80004000 { + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; + reg = <0x80004000 0x1000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + clock-frequency = <400000>; + clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>; + clock-names = "i2cclk", "apb_pclk"; + power-domains = <&pm_domains DOMAIN_VAPE>; + resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_I2C0>; + }; + + i2c@101f8000 { + compatible = "st,nomadik-i2c", "arm,primecell"; + reg = <0x101f8000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <20>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&i2c0clk>, <&pclki2c0>; + clock-names = "mclk", "apb_pclk"; + }; + +... diff --git a/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml new file mode 100644 index 0000000000..08f9c1e446 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/st,sti-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C controller embedded in STMicroelectronics STi platform + +maintainers: + - Patrice Chotard <patrice.chotard@foss.st.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - st,comms-ssc-i2c + - st,comms-ssc4-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + clock-frequency: + enum: [ 100000, 400000 ] + default: 100000 + + st,i2c-min-scl-pulse-width-us: + description: + The minimum valid SCL pulse width that is allowed through the + deglitch circuit. In units of us. + + st,i2c-min-sda-pulse-width-us: + description: + The minimum valid SDA pulse width that is allowed through the + deglitch circuit. In units of us. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stih407-clks.h> + i2c@fed40000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfed40000 0x110>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + st,i2c-min-scl-pulse-width-us = <0>; + st,i2c-min-sda-pulse-width-us = <5>; + }; diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml new file mode 100644 index 0000000000..94b75d9f66 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/st,stm32-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C controller embedded in STMicroelectronics STM32 I2C platform + +maintainers: + - Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - st,stm32f7-i2c + - st,stm32mp13-i2c + - st,stm32mp15-i2c + then: + properties: + i2c-scl-rising-time-ns: + default: 25 + + i2c-scl-falling-time-ns: + default: 10 + else: + properties: + st,syscfg-fmp: false + + - if: + properties: + compatible: + contains: + enum: + - st,stm32f4-i2c + then: + properties: + clock-frequency: + enum: [100000, 400000] + +properties: + compatible: + enum: + - st,stm32f4-i2c + - st,stm32f7-i2c + - st,stm32mp13-i2c + - st,stm32mp15-i2c + + reg: + maxItems: 1 + + interrupts: + items: + - description: interrupt ID for I2C event + - description: interrupt ID for I2C error + + interrupt-names: + items: + - const: event + - const: error + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + dmas: + items: + - description: RX DMA Channel phandle + - description: TX DMA Channel phandle + + dma-names: + items: + - const: rx + - const: tx + + clock-frequency: + description: Desired I2C bus clock frequency in Hz. If not specified, + the default 100 kHz frequency will be used. + For STM32F7, STM32H7 and STM32MP1 SoCs, if timing parameters + match, the bus clock frequency can be from 1Hz to 1MHz. + default: 100000 + minimum: 1 + maximum: 1000000 + + st,syscfg-fmp: + description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode + Plus speed is selected by slave. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to syscfg + - description: register offset within syscfg + - description: register bitmask for FMP bit + + wakeup-source: true + +required: + - compatible + - reg + - interrupts + - resets + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/mfd/stm32f7-rcc.h> + #include <dt-bindings/clock/stm32fx-clock.h> + //Example 1 (with st,stm32f4-i2c compatible) + i2c@40005400 { + compatible = "st,stm32f4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc 277>; + clocks = <&rcc 0 149>; + }; + + - | + #include <dt-bindings/mfd/stm32f7-rcc.h> + #include <dt-bindings/clock/stm32fx-clock.h> + //Example 2 (with st,stm32f7-i2c compatible) + i2c@40005800 { + compatible = "st,stm32f7-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40005800 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32F7_APB1_RESET(I2C1)>; + clocks = <&rcc 1 CLK_I2C1>; + }; + + - | + #include <dt-bindings/mfd/stm32f7-rcc.h> + #include <dt-bindings/clock/stm32fx-clock.h> + //Example 3 (with st,stm32mp15-i2c compatible on stm32mp) + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + i2c@40013000 { + compatible = "st,stm32mp15-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40013000 0x400>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C2_K>; + resets = <&rcc I2C2_R>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + st,syscfg-fmp = <&syscfg 0x4 0x2>; + }; diff --git a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml new file mode 100644 index 0000000000..781108ae1c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/ti,omap4-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C controllers on TI's OMAP and K3 SoCs + +maintainers: + - Vignesh Raghavendra <vigneshr@ti.com> + +properties: + compatible: + oneOf: + - enum: + - ti,omap2420-i2c + - ti,omap2430-i2c + - ti,omap3-i2c + - ti,omap4-i2c + - items: + - enum: + - ti,am4372-i2c + - ti,am64-i2c + - ti,am654-i2c + - ti,j721e-i2c + - const: ti,omap4-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: fck + + clock-frequency: true + + power-domains: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + ti,hwmods: + description: + Must be "i2c<n>", n being the instance number (1-based). + This property is applicable only on legacy platforms mainly omap2/3 + and ti81xx and should not be used on other platforms. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + +# subnode's properties +patternProperties: + "@[0-9a-f]+$": + type: object + description: + Flash device uses the below defined properties in the subnode. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +if: + properties: + compatible: + enum: + - ti,omap2420-i2c + - ti,omap2430-i2c + - ti,omap3-i2c + - ti,omap4-i2c + +then: + properties: + ti,hwmods: + items: + - pattern: "^i2c([1-9])$" + +else: + properties: + ti,hwmods: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + main_i2c0: i2c@2000000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x2000000 0x100>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml new file mode 100644 index 0000000000..658ae92fa8 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx IIC controller + +maintainers: + - info@mocean-labs.com + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + enum: + - xlnx,axi-iic-2.1 + - xlnx,xps-iic-2.00.a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + + clock-name: + const: pclk + description: | + Input clock name. + + clock-frequency: + description: + Optional I2C SCL clock frequency. If not specified, do not configure + in software, rely only on hardware design value. + default: 100000 + enum: [ 100000, 400000, 1000000 ] + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + axi_iic_0: i2c@40800000 { + compatible = "xlnx,xps-iic-2.00.a"; + clocks = <&clkc 15>; + interrupts = < 1 2 >; + reg = < 0x40800000 0x10000 >; + + #size-cells = <0>; + #address-cells = <1>; + }; |