Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 258 insertions, 21 deletions

diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml
new file mode 100644
index 0000000000..b005065e0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd2801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTD2801 one-wire backlight
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+  The Kinetic Technologies KTD2801 is a LED backlight driver controlled
+  by a single GPIO line. The driver can be controlled with a PWM signal
+  or by pulsing the GPIO line to set the backlight level. This is called
+  "ExpressWire".
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: kinetic,ktd2801
+
+  ctrl-gpios:
+    maxItems: 1
+
+  default-brightness: true
+  max-brightness: true
+
+required:
+  - compatible
+  - ctrl-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight {
+        compatible = "kinetic,ktd2801";
+        ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
+        max-brightness = <210>;
+        default-brightness = <100>;
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index 5f1849bdab..a849078101 100644
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. WLED driver
 
 maintainers:
-  - Bjorn Andersson <bjorn.andersson@linaro.org>
-  - Kiran Gunda <kgunda@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
+  - Kiran Gunda <quic_kgunda@quicinc.com>
 
 description: |
   WLED (White Light Emitting Diode) driver is used for controlling display
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 55a8d1385e..8a3c2398b1 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -200,6 +200,18 @@ properties:
       #trigger-source-cells property in the source node.
     $ref: /schemas/types.yaml#/definitions/phandle-array
 
+  active-low:
+    type: boolean
+    description:
+      Makes LED active low. To turn the LED ON, line needs to be
+      set to low voltage instead of high.
+
+  inactive-high-impedance:
+    type: boolean
+    description:
+      Set LED to high-impedance mode to turn the LED OFF. LED might also
+      describe this mode as tristate.
+
   # Required properties for flash LED child nodes:
   flash-max-microamp:
     description:
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
index 52252fb6bb..bb20394fca 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
@@ -52,10 +52,6 @@ patternProperties:
         maxItems: 1
         description: LED pin number
 
-      active-low:
-        type: boolean
-        description: Makes LED active low
-
     required:
       - reg
 
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
index 51cc0d82c1..f3a3ef9929 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
@@ -78,10 +78,6 @@ patternProperties:
           - maximum: 23
         description: LED pin number (only LEDs 0 to 23 are valid).
 
-      active-low:
-        type: boolean
-        description: Makes LED active low.
-
       brcm,hardware-controlled:
         type: boolean
         description: Makes this LED hardware controlled.
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
index 6e51c6b91e..211ffc3c4a 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
@@ -25,8 +25,6 @@ LED sub-node required properties:
 
 LED sub-node optional properties:
   - label : see Documentation/devicetree/bindings/leds/common.txt
-  - active-low : Boolean, makes LED active low.
-    Default : false
   - default-state : see
     Documentation/devicetree/bindings/leds/common.txt
   - linux,default-trigger : see
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
index bd6ec04a87..a31a202afe 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -41,9 +41,7 @@ properties:
 
           pwm-names: true
 
-          active-low:
-            description: For PWMs where the LED is wired to supply rather than ground.
-            type: boolean
+          active-low: true
 
           color: true
 
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
index 7de6da58be..113b7c2183 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -34,11 +34,6 @@ patternProperties:
           Maximum brightness possible for the LED
         $ref: /schemas/types.yaml#/definitions/uint32
 
-      active-low:
-        description:
-          For PWMs where the LED is wired to supply rather than ground.
-        type: boolean
-
     required:
       - pwms
       - max-brightness
diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
index ea84ad426d..54a428d3d4 100644
--- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 description: >
   The Qualcomm Light Pulse Generator consists of three different hardware blocks;
-  a ramp generator with lookup table, the light pulse generator and a three
+  a ramp generator with lookup table (LUT), the light pulse generator and a three
   channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
 
 properties:
@@ -63,6 +63,29 @@ properties:
         - description: dtest line to attach
         - description: flags for the attachment
 
+  nvmem:
+    description: >
+      This property is required for PMICs that supports PPG, which is when a
+      PMIC stores LPG per-channel data and pattern LUT in SDAM modules instead
+      of in a LUT peripheral. For PMICs, such as PM8350C, per-channel data
+      and pattern LUT is separated into 2 SDAM modules. In that case, phandles
+      to both SDAM modules need to be specified.
+    minItems: 1
+    maxItems: 2
+
+  nvmem-names:
+    minItems: 1
+    items:
+      - const: lpg_chan_sdam
+      - const: lut_sdam
+
+  qcom,pbs:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      Phandle of the Qualcomm Programmable Boot Sequencer node (PBS).
+      PBS node is used to trigger LPG pattern sequences for PMICs that support
+      single SDAM PPG.
+
   multi-led:
     type: object
     $ref: leds-class-multicolor.yaml#
@@ -106,6 +129,52 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660l-lpg
+              - qcom,pm8150b-lpg
+              - qcom,pm8150l-lpg
+              - qcom,pm8916-pwm
+              - qcom,pm8941-lpg
+              - qcom,pm8994-lpg
+              - qcom,pmc8180c-lpg
+              - qcom,pmi8994-lpg
+              - qcom,pmi8998-lpg
+              - qcom,pmk8550-pwm
+    then:
+      properties:
+        nvmem: false
+        nvmem-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmi632-lpg
+    then:
+      properties:
+        nvmem:
+          maxItems: 1
+        nvmem-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8350c-pwm
+    then:
+      properties:
+        nvmem:
+          minItems: 2
+        nvmem-names:
+          minItems: 2
+
 examples:
   - |
     #include <dt-bindings/leds/common.h>
@@ -191,4 +260,35 @@ examples:
       compatible = "qcom,pm8916-pwm";
       #pwm-cells = <2>;
     };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi632-lpg";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #pwm-cells = <2>;
+      nvmem-names = "lpg_chan_sdam";
+      nvmem = <&pmi632_sdam_7>;
+      qcom,pbs = <&pmi632_pbs_client3>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_RED>;
+        label = "red";
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        label = "green";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_BLUE>;
+        label = "blue";
+      };
+    };
+
 ...
diff --git a/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml b/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml
new file mode 100644
index 0000000000..9c9f3a682b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/onnn,ncp5623.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor NCP5623 multi-LED Driver
+
+maintainers:
+  - Abdel Alkuor <alkuor@gmail.com>
+
+description:
+  NCP5623 Triple Output I2C Controlled LED Driver.
+  https://www.onsemi.com/pdf/datasheet/ncp5623-d.pdf
+
+properties:
+  compatible:
+    enum:
+      - onnn,ncp5623
+
+  reg:
+    const: 0x38
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            minimum: 0
+            maximum: 2
+
+        required:
+          - reg
+          - color
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+required:
+  - compatible
+  - reg
+  - multi-led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@38 {
+            compatible = "onnn,ncp5623";
+            reg = <0x38>;
+
+            multi-led {
+                color = <LED_COLOR_ID_RGB>;
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+
+                led@1 {
+                    reg = <1>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@2 {
+                    reg = <2>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+            };
+        };
+    };