Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

11 files changed, 429 insertions, 280 deletions

diff --git a/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml
new file mode 100644
index 0000000000..4aa36903e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's HLCD Controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two
+  subdevices, a PWM chip and a Display Controller.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9n12-hlcdc
+      - atmel,at91sam9x5-hlcdc
+      - atmel,sama5d2-hlcdc
+      - atmel,sama5d3-hlcdc
+      - atmel,sama5d4-hlcdc
+      - microchip,sam9x60-hlcdc
+      - microchip,sam9x75-xlcdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: periph_clk
+      - const: sys_clk
+      - const: slow_clk
+      - const: lvds_pll_clk
+    minItems: 3
+
+  display-controller:
+    $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml
+
+  pwm:
+    $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    lcd_controller: lcd-controller@f0030000 {
+      compatible = "atmel,sama5d3-hlcdc";
+      reg = <0xf0030000 0x2000>;
+      clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+      clock-names = "periph_clk", "sys_clk", "slow_clk";
+      interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+
+      display-controller {
+        compatible = "atmel,hlcdc-display-controller";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0>;
+
+          hlcdc_panel_output: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&panel_input>;
+          };
+        };
+      };
+
+      pwm {
+        compatible = "atmel,hlcdc-pwm";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_pwm>;
+        #pwm-cells = <3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
new file mode 100644
index 0000000000..0dc6a40b63
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Flexcom (Flexible Serial Communication Unit)
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description:
+  The Microchip Flexcom is just a wrapper which embeds a SPI controller,
+  an I2C controller and an USART. Only one function can be used at a
+  time and is chosen at boot time according to the device tree.
+
+properties:
+  compatible:
+    oneOf:
+      - const: atmel,sama5d2-flexcom
+      - items:
+          - const: microchip,sam9x7-flexcom
+          - const: atmel,sama5d2-flexcom
+      - items:
+          - const: microchip,sama7g5-flexcom
+          - const: atmel,sama5d2-flexcom
+
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description:
+      One range for the full I/O register region. (including USART,
+      TWI and SPI registers).
+    items:
+      maxItems: 3
+
+  atmel,flexcom-mode:
+    description: |
+      Specifies the flexcom mode as follows:
+      1: USART
+      2: SPI
+      3: I2C.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+
+patternProperties:
+  "^serial@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing USART. See atmel-usart.txt for details
+      of USART bindings.
+
+  "^spi@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing SPI. See ../spi/spi_atmel.txt for details
+      of SPI bindings.
+
+  "^i2c@[0-9a-f]+$":
+    $ref: /schemas/i2c/atmel,at91sam-i2c.yaml
+    description:
+      Child node describing I2C.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - atmel,flexcom-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    flx0: flexcom@f8034000 {
+        compatible = "atmel,sama5d2-flexcom";
+        reg = <0xf8034000 0x200>;
+        clocks = <&flx0_clk>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xf8034000 0x800>;
+        atmel,flexcom-mode = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
deleted file mode 100644
index af692e8833..0000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
-
-The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
-controller and an USART. Only one function can be used at a time and is chosen
-at boot time according to the device tree.
-
-Required properties:
-- compatible:		Should be "atmel,sama5d2-flexcom"
-			or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"
-- reg:			Should be the offset/length value for Flexcom dedicated
-			I/O registers (without USART, TWI or SPI registers).
-- clocks:		Should be the Flexcom peripheral clock from PMC.
-- #address-cells:	Should be <1>
-- #size-cells:		Should be <1>
-- ranges:		Should be one range for the full I/O register region
-			(including USART, TWI and SPI registers).
-- atmel,flexcom-mode:	Should be one of the following values:
-			- <1> for USART
-			- <2> for SPI
-			- <3> for I2C
-
-Required child:
-A single available child device of type matching the "atmel,flexcom-mode"
-property.
-
-The phandle provided by the clocks property of the child is the same as one for
-the Flexcom parent.
-
-For other properties, please refer to the documentations of the respective
-device:
-- ../serial/atmel-usart.txt
-- ../spi/spi_atmel.txt
-- ../i2c/i2c-at91.txt
-
-Example:
-
-flexcom@f8034000 {
-	compatible = "atmel,sama5d2-flexcom";
-	reg = <0xf8034000 0x200>;
-	clocks = <&flx0_clk>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x0 0xf8034000 0x800>;
-	atmel,flexcom-mode = <2>;
-
-	spi@400 {
-		compatible = "atmel,at91rm9200-spi";
-		reg = <0x400 0x200>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx0_default>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&flx0_clk>;
-		clock-names = "spi_clk";
-		atmel,fifo-size = <32>;
-
-		flash@0 {
-			compatible = "atmel,at25f512b";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
deleted file mode 100644
index 7de696eefa..0000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
-
-Required properties:
- - compatible: value should be one of the following:
-   "atmel,at91sam9n12-hlcdc"
-   "atmel,at91sam9x5-hlcdc"
-   "atmel,sama5d2-hlcdc"
-   "atmel,sama5d3-hlcdc"
-   "atmel,sama5d4-hlcdc"
-   "microchip,sam9x60-hlcdc"
-   "microchip,sam9x75-xlcdc"
- - reg: base address and size of the HLCDC device registers.
- - clock-names: the name of the 3 clocks requested by the HLCDC device.
-   Should contain "periph_clk", "sys_clk" and "slow_clk".
- - clocks: should contain the 3 clocks requested by the HLCDC device.
- - interrupts: should contain the description of the HLCDC interrupt line
-
-The HLCDC IP exposes two subdevices:
- - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
- - a Display Controller: see ../display/atmel/hlcdc-dc.txt
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-
-		hlcdc-display-controller {
-			compatible = "atmel,hlcdc-display-controller";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				hlcdc_panel_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
deleted file mode 100644
index e4eedd3bd2..0000000000
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-* Dialog DA9062 Power Management Integrated Circuit (PMIC)
-
-Product information for the DA9062 and DA9061 devices can be found here:
-- https://www.dialog-semiconductor.com/products/da9062
-- https://www.dialog-semiconductor.com/products/da9061
-
-The DA9062 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-rtc              :               : Real-Time Clock
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-da9062-gpio             :               : GPIOs
-
-The DA9061 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-
-======
-
-Required properties:
-
-- compatible : Should be
-    "dlg,da9062" for DA9062
-    "dlg,da9061" for DA9061
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
-  modified to match the chip's OTP settings).
-
-Optional properties:
-
-- gpio-controller : Marks the device as a gpio controller.
-- #gpio-cells     : Should be two. The first cell is the pin number and the
-                    second cell is used to specify the gpio polarity.
-
-See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
-GPIO bindings.
-
-- interrupts : IRQ line information.
-- interrupt-controller
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-further information on IRQ bindings.
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
-  The DA9062 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    buck4    : BUCK_4
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The DA9061 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The component follows the standard regulator framework and the bindings
-  details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-  regulator-initial-mode may be specified for buck regulators using mode values
-  from include/dt-bindings/regulator/dlg,da9063-regulator.h.
-
-- rtc : This node defines settings required for the Real-Time Clock associated
-  with the DA9062. There are currently no entries in this binding, however
-  compatible = "dlg,da9062-rtc" should be added if a node is created.
-
-- onkey : See ../input/da9062-onkey.txt
-
-- watchdog: See ../watchdog/da9062-wdt.txt
-
-- thermal : See ../thermal/da9062-thermal.txt
-
-Example:
-
-	pmic0: da9062@58 {
-		compatible = "dlg,da9062";
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9062-rtc";
-		};
-
-		regulators {
-			DA9062_BUCK1: buck1 {
-				regulator-name = "BUCK1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp = <500000>;
-				regulator-max-microamp = <2000000>;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
-				regulator-boot-on;
-			};
-			DA9062_LDO1: ldo1 {
-				regulator-name = "LDO_1";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
index c5a7e10d7d..51612dc227 100644
--- a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC)
 
 maintainers:
   - Steve Twiss <stwiss.opensource@diasemi.com>
@@ -17,10 +17,17 @@ description: |
   moment where all voltage monitors are disabled. Next, as da9063 only supports
   UV *and* OV monitoring, both must be set to the same severity and value
   (0: disable, 1: enable).
+  Product information for the DA906{3L,3,2,1} devices can be found here:
+  - https://www.dialog-semiconductor.com/products/da9063l
+  - https://www.dialog-semiconductor.com/products/da9063
+  - https://www.dialog-semiconductor.com/products/da9062
+  - https://www.dialog-semiconductor.com/products/da9061
 
 properties:
   compatible:
     enum:
+      - dlg,da9061
+      - dlg,da9062
       - dlg,da9063
       - dlg,da9063l
 
@@ -35,20 +42,28 @@ properties:
   "#interrupt-cells":
     const: 2
 
-  dlg,use-sw-pm:
-    type: boolean
-    description:
-      Disable the watchdog during suspend.
-      Only use this option if you can't use the watchdog automatic suspend
-      function during a suspend (see register CONTROL_B).
+  gpio-controller: true
 
-  watchdog:
+  "#gpio-cells":
+    const: 2
+
+  gpio:
     type: object
-    $ref: /schemas/watchdog/watchdog.yaml#
-    unevaluatedProperties: false
+    additionalProperties: false
     properties:
       compatible:
-        const: dlg,da9063-watchdog
+        const: dlg,da9062-gpio
+
+  onkey:
+    $ref: /schemas/input/dlg,da9062-onkey.yaml
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$":
+        $ref: /schemas/regulator/regulator.yaml
+        unevaluatedProperties: false
 
   rtc:
     type: object
@@ -56,37 +71,86 @@ properties:
     unevaluatedProperties: false
     properties:
       compatible:
-        const: dlg,da9063-rtc
+        enum:
+          - dlg,da9062-rtc
+          - dlg,da9063-rtc
 
-  onkey:
-    type: object
-    $ref: /schemas/input/input.yaml#
-    unevaluatedProperties: false
-    properties:
-      compatible:
-        const: dlg,da9063-onkey
+  thermal:
+    $ref: /schemas/thermal/dlg,da9062-thermal.yaml
 
-      dlg,disable-key-power:
-        type: boolean
-        description: |
-          Disable power-down using a long key-press.
-          If this entry does not exist then by default the key-press triggered
-          power down is enabled and the OnKey will support both KEY_POWER and
-          KEY_SLEEP.
+  watchdog:
+    $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml
 
-  regulators:
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
     type: object
-    additionalProperties: false
-    patternProperties:
-      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$":
-        $ref: /schemas/regulator/regulator.yaml
-        unevaluatedProperties: false
+
+    required:
+      - gpio-hog
 
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9063
+              - dlg,da9063l
+    then:
+      properties:
+        gpio-controller: false
+        "#gpio-cells": false
+        gpio: false
+        regulators:
+          patternProperties:
+            "^buck[1-4]$": false
+        thermal: false
+      required:
+        - interrupts
+        - interrupt-controller
+        - '#interrupt-cells'
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9062
+    then:
+      properties:
+        regulators:
+          patternProperties:
+            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false
+      required:
+        - gpio
+        - onkey
+        - rtc
+        - thermal
+        - watchdog
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9061
+    then:
+      properties:
+        gpio-controller: false
+        "#gpio-cells": false
+        gpio: false
+        regulators:
+          patternProperties:
+            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false
+        rtc: false
+      required:
+        - onkey
+        - thermal
+        - watchdog
 
 additionalProperties: false
 
@@ -99,10 +163,10 @@ examples:
       pmic@58 {
         compatible = "dlg,da9063";
         reg = <0x58>;
-        #interrupt-cells = <2>;
         interrupt-parent = <&gpio6>;
         interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
         interrupt-controller;
+        #interrupt-cells = <2>;
 
         rtc {
           compatible = "dlg,da9063-rtc";
@@ -143,4 +207,121 @@ examples:
         };
       };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9063-regulator.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@58 {
+        compatible = "dlg,da9062";
+        reg = <0x58>;
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        sd0-pwr-sel-hog {
+          gpio-hog;
+          gpios = <1 0>;
+          input;
+          line-name = "SD0_PWR_SEL";
+        };
+
+        sd1-pwr-sel-hog {
+          gpio-hog;
+          gpios = <2 0>;
+          input;
+          line-name = "SD1_PWR_SEL";
+        };
+
+        sw-et0-en-hog {
+          gpio-hog;
+          gpios = <3 0>;
+          input;
+          line-name = "SW_ET0_EN#";
+        };
+
+        pmic-good-hog {
+          gpio-hog;
+          gpios = <4 0>;
+          output-high;
+          line-name = "PMIC_PGOOD";
+        };
+
+        gpio {
+          compatible = "dlg,da9062-gpio";
+        };
+
+        onkey {
+          compatible = "dlg,da9062-onkey";
+        };
+
+        regulators {
+          buck1 {
+            regulator-name = "vdd_arm";
+            regulator-min-microvolt = <925000>;
+            regulator-max-microvolt = <1380000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck2 {
+            regulator-name = "vdd_soc";
+            regulator-min-microvolt = <1150000>;
+            regulator-max-microvolt = <1380000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck3 {
+            regulator-name = "vdd_ddr3";
+            regulator-min-microvolt = <1500000>;
+            regulator-max-microvolt = <1500000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck4 {
+            regulator-name = "vdd_eth";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          ldo1 {
+            regulator-name = "vdd_snvs";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+          ldo2 {
+            regulator-name = "vdd_high";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+          ldo3 {
+            regulator-name = "vdd_eth_io";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+          };
+          ldo4 {
+            regulator-name = "vdd_emmc";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+        };
+
+        rtc {
+          compatible = "dlg,da9062-rtc";
+        };
+
+        thermal {
+          compatible = "dlg,da9062-thermal";
+        };
+
+        watchdog {
+          compatible = "dlg,da9062-watchdog";
+          dlg,use-sw-pm;
+        };
+      };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index e1ca4f297c..aac8819bd0 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -93,6 +93,11 @@ properties:
   '#size-cells':
     const: 0
 
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
   typec:
     $ref: /schemas/chrome/google,cros-ec-typec.yaml#
 
@@ -275,6 +280,8 @@ examples:
             interrupts = <99 0>;
             interrupt-parent = <&gpio7>;
             spi-max-frequency = <5000000>;
+            #gpio-cells = <2>;
+            gpio-controller;
 
             proximity {
                 compatible = "google,cros-ec-mkbp-proximity";
diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
index 044cd7542c..f438c23749 100644
--- a/Documentation/devicetree/bindings/mfd/iqs62x.yaml
+++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
@@ -31,7 +31,7 @@ properties:
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       Specifies the name of the calibration and configuration file selected by
       the driver. If this property is omitted, the name is chosen based on the
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index 798705ab6a..b97d770153 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -19,6 +19,7 @@ properties:
       - enum:
           - qcom,msm8976-tcsr
           - qcom,msm8998-tcsr
+          - qcom,qcm2290-tcsr
           - qcom,qcs404-tcsr
           - qcom,sc7180-tcsr
           - qcom,sc7280-tcsr
@@ -28,6 +29,7 @@ properties:
           - qcom,sdx55-tcsr
           - qcom,sdx65-tcsr
           - qcom,sm4450-tcsr
+          - qcom,sm6115-tcsr
           - qcom,sm8150-tcsr
           - qcom,sm8250-tcsr
           - qcom,sm8350-tcsr
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 084b5c2a2a..9d55bee155 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -72,7 +72,10 @@ properties:
               - rockchip,rk3588-qos
               - rockchip,rv1126-qos
               - starfive,jh7100-sysmain
+              - ti,am62-usb-phy-ctrl
               - ti,am654-dss-oldi-io-ctrl
+              - ti,am654-serdes-ctrl
+              - ti,j784s4-pcie-ctrl
 
           - const: syscon
 
diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
index c04d57ba22..52ed228fb1 100644
--- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
@@ -34,6 +34,8 @@ properties:
 
   interrupt-controller: true
 
+  system-power-controller: true
+
   "#interrupt-cells":
     const: 1