summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /Documentation/devicetree/bindings/net/socfpga-dwmac.txt
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/net/socfpga-dwmac.txt')
-rw-r--r--Documentation/devicetree/bindings/net/socfpga-dwmac.txt57
1 files changed, 57 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
new file mode 100644
index 0000000000..612a8e8abc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
@@ -0,0 +1,57 @@
+Altera SOCFPGA SoC DWMAC controller
+
+This is a variant of the dwmac/stmmac driver an inherits all descriptions
+present in Documentation/devicetree/bindings/net/stmmac.txt.
+
+The device node has additional properties:
+
+Required properties:
+ - compatible : For Cyclone5/Arria5 SoCs it should contain
+ "altr,socfpga-stmmac". For Arria10/Agilex/Stratix10 SoCs
+ "altr,socfpga-stmmac-a10-s10".
+ Along with "snps,dwmac" and any applicable more detailed
+ designware version numbers documented in stmmac.txt
+ - altr,sysmgr-syscon : Should be the phandle to the system manager node that
+ encompasses the glue register, the register offset, and the register shift.
+ On Cyclone5/Arria5, the register shift represents the PHY mode bits, while
+ on the Arria10/Stratix10/Agilex platforms, the register shift represents
+ bit for each emac to enable/disable signals from the FPGA fabric to the
+ EMAC modules.
+ - altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock
+ for ptp ref clk. This affects all emacs as the clock is common.
+
+Optional properties:
+altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
+ DWMAC controller is connected emac splitter.
+phy-mode: The phy mode the ethernet operates in
+altr,sgmii-to-sgmii-converter: phandle to the TSE SGMII converter
+
+This device node has additional phandle dependency, the sgmii converter:
+
+Required properties:
+ - compatible : Should be altr,gmii-to-sgmii-2.0
+ - reg-names : Should be "eth_tse_control_port"
+
+Example:
+
+gmii_to_sgmii_converter: phy@100000240 {
+ compatible = "altr,gmii-to-sgmii-2.0";
+ reg = <0x00000001 0x00000240 0x00000008>,
+ <0x00000001 0x00000200 0x00000040>;
+ reg-names = "eth_tse_control_port";
+ clocks = <&sgmii_1_clk_0 &emac1 1 &sgmii_clk_125 &sgmii_clk_125>;
+ clock-names = "tse_pcs_ref_clk_clock_connection", "tse_rx_cdr_refclk";
+};
+
+gmac0: ethernet@ff700000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x60 0>;
+ reg = <0xff700000 0x2000>;
+ interrupts = <0 115 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+ clocks = <&emac_0_clk>;
+ clock-names = "stmmaceth";
+ phy-mode = "sgmii";
+ altr,gmii-to-sgmii-converter = <&gmii_to_sgmii_converter>;
+};