Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 89 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt
new file mode 100644
index 0000000000..8f3f62c022
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5659.txt
@@ -0,0 +1,89 @@
+RT5659/RT5658 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5659" or "realtek,rt5658".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+- clock-names: Should be "mclk"
+
+- realtek,in1-differential
+- realtek,in3-differential
+- realtek,in4-differential
+  Boolean. Indicate MIC1/3/4 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using IN2N pin as dmic1 data pin
+  2: using GPIO5 pin as dmic1 data pin
+  3: using GPIO9 pin as dmic1 data pin
+  4: using GPIO11 pin as dmic1 data pin
+
+- realtek,dmic2-data-pin
+  0: dmic2 is not used
+  1: using IN2P pin as dmic2 data pin
+  2: using GPIO6 pin as dmic2 data pin
+  3: using GPIO10 pin as dmic2 data pin
+  4: using GPIO12 pin as dmic2 data pin
+
+- realtek,jd-src
+  0: No JD is used
+  1: using JD3 as JD source
+  2: JD source for Intel HDA header
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+- realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
+
+- sound-name-prefix: Please refer to dai-common.yaml
+
+- ports: A Codec may have a single or multiple I2S interfaces. These
+  interfaces on Codec side can be described under 'ports' or 'port'.
+  When the SoC or host device is connected to multiple interfaces of
+  the Codec, the connectivity can be described using 'ports' property.
+  If a single interface is used, then 'port' can be used. The usage
+  depends on the platform or board design.
+  Please refer to Documentation/devicetree/bindings/graph.txt
+
+Pins on the device (for linking into audio routes) for RT5659/RT5658:
+
+  * DMIC L1
+  * DMIC R1
+  * DMIC L2
+  * DMIC R2
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * IN3P
+  * IN3N
+  * IN4P
+  * IN4N
+  * HPOL
+  * HPOR
+  * SPOL
+  * SPOR
+  * LOUTL
+  * LOUTR
+  * MONOOUT
+  * PDML
+  * PDMR
+  * SPDIF
+
+Example:
+
+rt5659 {
+	compatible = "realtek,rt5659";
+	reg = <0x1b>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
+	realtek,ldo1-en-gpios =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+};