Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 110 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
new file mode 100644
index 0000000000..f196beb826
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/gpio-sbu-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based SBU mux
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  In USB Type-C applications the SBU lines needs to be connected, disconnected
+  and swapped depending on the altmode and orientation. This binding describes
+  a family of hardware solutions which switches between these modes using GPIO
+  signals.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - onnn,fsusb43l10x
+          - pericom,pi3usb102
+      - const: gpio-sbu-mux
+
+  enable-gpios:
+    description: Switch enable GPIO
+
+  select-gpios:
+    description: Orientation select
+
+  vcc-supply:
+    description: power supply
+
+  mode-switch:
+    description: Flag the port as possible handle of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the SBU mux to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - enable-gpios
+  - select-gpios
+  - mode-switch
+  - orientation-switch
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    tcpm {
+        connector {
+            compatible = "usb-c-connector";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    tcpm_hs_out: endpoint {
+                        remote-endpoint = <&usb_hs_phy_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    tcpm_ss_out: endpoint {
+                        remote-endpoint = <&usb_ss_phy_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    tcpm_sbu_out: endpoint {
+                        remote-endpoint = <&sbu_mux_in>;
+                    };
+                };
+            };
+        };
+    };
+
+    sbu-mux {
+        compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+        enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+        select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+        mode-switch;
+        orientation-switch;
+
+        port {
+            sbu_mux_in: endpoint {
+                remote-endpoint = <&tcpm_sbu_out>;
+            };
+        };
+    };
+...