summaryrefslogtreecommitdiffstats
path: root/Documentation/driver-api/pm
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /Documentation/driver-api/pm
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/driver-api/pm')
-rw-r--r--Documentation/driver-api/pm/cpuidle.rst279
-rw-r--r--Documentation/driver-api/pm/devices.rst880
-rw-r--r--Documentation/driver-api/pm/index.rst19
-rw-r--r--Documentation/driver-api/pm/notifiers.rst74
-rw-r--r--Documentation/driver-api/pm/types.rst7
5 files changed, 1259 insertions, 0 deletions
diff --git a/Documentation/driver-api/pm/cpuidle.rst b/Documentation/driver-api/pm/cpuidle.rst
new file mode 100644
index 0000000000..d477208604
--- /dev/null
+++ b/Documentation/driver-api/pm/cpuidle.rst
@@ -0,0 +1,279 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+========================
+CPU Idle Time Management
+========================
+
+:Copyright: |copy| 2019 Intel Corporation
+
+:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+CPU Idle Time Management Subsystem
+==================================
+
+Every time one of the logical CPUs in the system (the entities that appear to
+fetch and execute instructions: hardware threads, if present, or processor
+cores) is idle after an interrupt or equivalent wakeup event, which means that
+there are no tasks to run on it except for the special "idle" task associated
+with it, there is an opportunity to save energy for the processor that it
+belongs to. That can be done by making the idle logical CPU stop fetching
+instructions from memory and putting some of the processor's functional units
+depended on by it into an idle state in which they will draw less power.
+
+However, there may be multiple different idle states that can be used in such a
+situation in principle, so it may be necessary to find the most suitable one
+(from the kernel perspective) and ask the processor to use (or "enter") that
+particular idle state. That is the role of the CPU idle time management
+subsystem in the kernel, called ``CPUIdle``.
+
+The design of ``CPUIdle`` is modular and based on the code duplication avoidance
+principle, so the generic code that in principle need not depend on the hardware
+or platform design details in it is separate from the code that interacts with
+the hardware. It generally is divided into three categories of functional
+units: *governors* responsible for selecting idle states to ask the processor
+to enter, *drivers* that pass the governors' decisions on to the hardware and
+the *core* providing a common framework for them.
+
+
+CPU Idle Time Governors
+=======================
+
+A CPU idle time (``CPUIdle``) governor is a bundle of policy code invoked when
+one of the logical CPUs in the system turns out to be idle. Its role is to
+select an idle state to ask the processor to enter in order to save some energy.
+
+``CPUIdle`` governors are generic and each of them can be used on any hardware
+platform that the Linux kernel can run on. For this reason, data structures
+operated on by them cannot depend on any hardware architecture or platform
+design details as well.
+
+The governor itself is represented by a struct cpuidle_governor object
+containing four callback pointers, :c:member:`enable`, :c:member:`disable`,
+:c:member:`select`, :c:member:`reflect`, a :c:member:`rating` field described
+below, and a name (string) used for identifying it.
+
+For the governor to be available at all, that object needs to be registered
+with the ``CPUIdle`` core by calling :c:func:`cpuidle_register_governor()` with
+a pointer to it passed as the argument. If successful, that causes the core to
+add the governor to the global list of available governors and, if it is the
+only one in the list (that is, the list was empty before) or the value of its
+:c:member:`rating` field is greater than the value of that field for the
+governor currently in use, or the name of the new governor was passed to the
+kernel as the value of the ``cpuidle.governor=`` command line parameter, the new
+governor will be used from that point on (there can be only one ``CPUIdle``
+governor in use at a time). Also, user space can choose the ``CPUIdle``
+governor to use at run time via ``sysfs``.
+
+Once registered, ``CPUIdle`` governors cannot be unregistered, so it is not
+practical to put them into loadable kernel modules.
+
+The interface between ``CPUIdle`` governors and the core consists of four
+callbacks:
+
+:c:member:`enable`
+ ::
+
+ int (*enable) (struct cpuidle_driver *drv, struct cpuidle_device *dev);
+
+ The role of this callback is to prepare the governor for handling the
+ (logical) CPU represented by the struct cpuidle_device object pointed
+ to by the ``dev`` argument. The struct cpuidle_driver object pointed
+ to by the ``drv`` argument represents the ``CPUIdle`` driver to be used
+ with that CPU (among other things, it should contain the list of
+ struct cpuidle_state objects representing idle states that the
+ processor holding the given CPU can be asked to enter).
+
+ It may fail, in which case it is expected to return a negative error
+ code, and that causes the kernel to run the architecture-specific
+ default code for idle CPUs on the CPU in question instead of ``CPUIdle``
+ until the ``->enable()`` governor callback is invoked for that CPU
+ again.
+
+:c:member:`disable`
+ ::
+
+ void (*disable) (struct cpuidle_driver *drv, struct cpuidle_device *dev);
+
+ Called to make the governor stop handling the (logical) CPU represented
+ by the struct cpuidle_device object pointed to by the ``dev``
+ argument.
+
+ It is expected to reverse any changes made by the ``->enable()``
+ callback when it was last invoked for the target CPU, free all memory
+ allocated by that callback and so on.
+
+:c:member:`select`
+ ::
+
+ int (*select) (struct cpuidle_driver *drv, struct cpuidle_device *dev,
+ bool *stop_tick);
+
+ Called to select an idle state for the processor holding the (logical)
+ CPU represented by the struct cpuidle_device object pointed to by the
+ ``dev`` argument.
+
+ The list of idle states to take into consideration is represented by the
+ :c:member:`states` array of struct cpuidle_state objects held by the
+ struct cpuidle_driver object pointed to by the ``drv`` argument (which
+ represents the ``CPUIdle`` driver to be used with the CPU at hand). The
+ value returned by this callback is interpreted as an index into that
+ array (unless it is a negative error code).
+
+ The ``stop_tick`` argument is used to indicate whether or not to stop
+ the scheduler tick before asking the processor to enter the selected
+ idle state. When the ``bool`` variable pointed to by it (which is set
+ to ``true`` before invoking this callback) is cleared to ``false``, the
+ processor will be asked to enter the selected idle state without
+ stopping the scheduler tick on the given CPU (if the tick has been
+ stopped on that CPU already, however, it will not be restarted before
+ asking the processor to enter the idle state).
+
+ This callback is mandatory (i.e. the :c:member:`select` callback pointer
+ in struct cpuidle_governor must not be ``NULL`` for the registration
+ of the governor to succeed).
+
+:c:member:`reflect`
+ ::
+
+ void (*reflect) (struct cpuidle_device *dev, int index);
+
+ Called to allow the governor to evaluate the accuracy of the idle state
+ selection made by the ``->select()`` callback (when it was invoked last
+ time) and possibly use the result of that to improve the accuracy of
+ idle state selections in the future.
+
+In addition, ``CPUIdle`` governors are required to take power management
+quality of service (PM QoS) constraints on the processor wakeup latency into
+account when selecting idle states. In order to obtain the current effective
+PM QoS wakeup latency constraint for a given CPU, a ``CPUIdle`` governor is
+expected to pass the number of the CPU to
+:c:func:`cpuidle_governor_latency_req()`. Then, the governor's ``->select()``
+callback must not return the index of an indle state whose
+:c:member:`exit_latency` value is greater than the number returned by that
+function.
+
+
+CPU Idle Time Management Drivers
+================================
+
+CPU idle time management (``CPUIdle``) drivers provide an interface between the
+other parts of ``CPUIdle`` and the hardware.
+
+First of all, a ``CPUIdle`` driver has to populate the :c:member:`states` array
+of struct cpuidle_state objects included in the struct cpuidle_driver object
+representing it. Going forward this array will represent the list of available
+idle states that the processor hardware can be asked to enter shared by all of
+the logical CPUs handled by the given driver.
+
+The entries in the :c:member:`states` array are expected to be sorted by the
+value of the :c:member:`target_residency` field in struct cpuidle_state in
+the ascending order (that is, index 0 should correspond to the idle state with
+the minimum value of :c:member:`target_residency`). [Since the
+:c:member:`target_residency` value is expected to reflect the "depth" of the
+idle state represented by the struct cpuidle_state object holding it, this
+sorting order should be the same as the ascending sorting order by the idle
+state "depth".]
+
+Three fields in struct cpuidle_state are used by the existing ``CPUIdle``
+governors for computations related to idle state selection:
+
+:c:member:`target_residency`
+ Minimum time to spend in this idle state including the time needed to
+ enter it (which may be substantial) to save more energy than could
+ be saved by staying in a shallower idle state for the same amount of
+ time, in microseconds.
+
+:c:member:`exit_latency`
+ Maximum time it will take a CPU asking the processor to enter this idle
+ state to start executing the first instruction after a wakeup from it,
+ in microseconds.
+
+:c:member:`flags`
+ Flags representing idle state properties. Currently, governors only use
+ the ``CPUIDLE_FLAG_POLLING`` flag which is set if the given object
+ does not represent a real idle state, but an interface to a software
+ "loop" that can be used in order to avoid asking the processor to enter
+ any idle state at all. [There are other flags used by the ``CPUIdle``
+ core in special situations.]
+
+The :c:member:`enter` callback pointer in struct cpuidle_state, which must not
+be ``NULL``, points to the routine to execute in order to ask the processor to
+enter this particular idle state:
+
+::
+
+ void (*enter) (struct cpuidle_device *dev, struct cpuidle_driver *drv,
+ int index);
+
+The first two arguments of it point to the struct cpuidle_device object
+representing the logical CPU running this callback and the
+struct cpuidle_driver object representing the driver itself, respectively,
+and the last one is an index of the struct cpuidle_state entry in the driver's
+:c:member:`states` array representing the idle state to ask the processor to
+enter.
+
+The analogous ``->enter_s2idle()`` callback in struct cpuidle_state is used
+only for implementing the suspend-to-idle system-wide power management feature.
+The difference between in and ``->enter()`` is that it must not re-enable
+interrupts at any point (even temporarily) or attempt to change the states of
+clock event devices, which the ``->enter()`` callback may do sometimes.
+
+Once the :c:member:`states` array has been populated, the number of valid
+entries in it has to be stored in the :c:member:`state_count` field of the
+struct cpuidle_driver object representing the driver. Moreover, if any
+entries in the :c:member:`states` array represent "coupled" idle states (that
+is, idle states that can only be asked for if multiple related logical CPUs are
+idle), the :c:member:`safe_state_index` field in struct cpuidle_driver needs
+to be the index of an idle state that is not "coupled" (that is, one that can be
+asked for if only one logical CPU is idle).
+
+In addition to that, if the given ``CPUIdle`` driver is only going to handle a
+subset of logical CPUs in the system, the :c:member:`cpumask` field in its
+struct cpuidle_driver object must point to the set (mask) of CPUs that will be
+handled by it.
+
+A ``CPUIdle`` driver can only be used after it has been registered. If there
+are no "coupled" idle state entries in the driver's :c:member:`states` array,
+that can be accomplished by passing the driver's struct cpuidle_driver object
+to :c:func:`cpuidle_register_driver()`. Otherwise, :c:func:`cpuidle_register()`
+should be used for this purpose.
+
+However, it also is necessary to register struct cpuidle_device objects for
+all of the logical CPUs to be handled by the given ``CPUIdle`` driver with the
+help of :c:func:`cpuidle_register_device()` after the driver has been registered
+and :c:func:`cpuidle_register_driver()`, unlike :c:func:`cpuidle_register()`,
+does not do that automatically. For this reason, the drivers that use
+:c:func:`cpuidle_register_driver()` to register themselves must also take care
+of registering the struct cpuidle_device objects as needed, so it is generally
+recommended to use :c:func:`cpuidle_register()` for ``CPUIdle`` driver
+registration in all cases.
+
+The registration of a struct cpuidle_device object causes the ``CPUIdle``
+``sysfs`` interface to be created and the governor's ``->enable()`` callback to
+be invoked for the logical CPU represented by it, so it must take place after
+registering the driver that will handle the CPU in question.
+
+``CPUIdle`` drivers and struct cpuidle_device objects can be unregistered
+when they are not necessary any more which allows some resources associated with
+them to be released. Due to dependencies between them, all of the
+struct cpuidle_device objects representing CPUs handled by the given
+``CPUIdle`` driver must be unregistered, with the help of
+:c:func:`cpuidle_unregister_device()`, before calling
+:c:func:`cpuidle_unregister_driver()` to unregister the driver. Alternatively,
+:c:func:`cpuidle_unregister()` can be called to unregister a ``CPUIdle`` driver
+along with all of the struct cpuidle_device objects representing CPUs handled
+by it.
+
+``CPUIdle`` drivers can respond to runtime system configuration changes that
+lead to modifications of the list of available processor idle states (which can
+happen, for example, when the system's power source is switched from AC to
+battery or the other way around). Upon a notification of such a change,
+a ``CPUIdle`` driver is expected to call :c:func:`cpuidle_pause_and_lock()` to
+turn ``CPUIdle`` off temporarily and then :c:func:`cpuidle_disable_device()` for
+all of the struct cpuidle_device objects representing CPUs affected by that
+change. Next, it can update its :c:member:`states` array in accordance with
+the new configuration of the system, call :c:func:`cpuidle_enable_device()` for
+all of the relevant struct cpuidle_device objects and invoke
+:c:func:`cpuidle_resume_and_unlock()` to allow ``CPUIdle`` to be used again.
diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst
new file mode 100644
index 0000000000..d448cb57df
--- /dev/null
+++ b/Documentation/driver-api/pm/devices.rst
@@ -0,0 +1,880 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+.. _driverapi_pm_devices:
+
+==============================
+Device Power Management Basics
+==============================
+
+:Copyright: |copy| 2010-2011 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+:Copyright: |copy| 2010 Alan Stern <stern@rowland.harvard.edu>
+:Copyright: |copy| 2016 Intel Corporation
+
+:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+Most of the code in Linux is device drivers, so most of the Linux power
+management (PM) code is also driver-specific. Most drivers will do very
+little; others, especially for platforms with small batteries (like cell
+phones), will do a lot.
+
+This writeup gives an overview of how drivers interact with system-wide
+power management goals, emphasizing the models and interfaces that are
+shared by everything that hooks up to the driver model core. Read it as
+background for the domain-specific work you'd do with any specific driver.
+
+
+Two Models for Device Power Management
+======================================
+
+Drivers will use one or both of these models to put devices into low-power
+states:
+
+ System Sleep model:
+
+ Drivers can enter low-power states as part of entering system-wide
+ low-power states like "suspend" (also known as "suspend-to-RAM"), or
+ (mostly for systems with disks) "hibernation" (also known as
+ "suspend-to-disk").
+
+ This is something that device, bus, and class drivers collaborate on
+ by implementing various role-specific suspend and resume methods to
+ cleanly power down hardware and software subsystems, then reactivate
+ them without loss of data.
+
+ Some drivers can manage hardware wakeup events, which make the system
+ leave the low-power state. This feature may be enabled or disabled
+ using the relevant :file:`/sys/devices/.../power/wakeup` file (for
+ Ethernet drivers the ioctl interface used by ethtool may also be used
+ for this purpose); enabling it may cost some power usage, but let the
+ whole system enter low-power states more often.
+
+ Runtime Power Management model:
+
+ Devices may also be put into low-power states while the system is
+ running, independently of other power management activity in principle.
+ However, devices are not generally independent of each other (for
+ example, a parent device cannot be suspended unless all of its child
+ devices have been suspended). Moreover, depending on the bus type the
+ device is on, it may be necessary to carry out some bus-specific
+ operations on the device for this purpose. Devices put into low power
+ states at run time may require special handling during system-wide power
+ transitions (suspend or hibernation).
+
+ For these reasons not only the device driver itself, but also the
+ appropriate subsystem (bus type, device type or device class) driver and
+ the PM core are involved in runtime power management. As in the system
+ sleep power management case, they need to collaborate by implementing
+ various role-specific suspend and resume methods, so that the hardware
+ is cleanly powered down and reactivated without data or service loss.
+
+There's not a lot to be said about those low-power states except that they are
+very system-specific, and often device-specific. Also, that if enough devices
+have been put into low-power states (at runtime), the effect may be very similar
+to entering some system-wide low-power state (system sleep) ... and that
+synergies exist, so that several drivers using runtime PM might put the system
+into a state where even deeper power saving options are available.
+
+Most suspended devices will have quiesced all I/O: no more DMA or IRQs (except
+for wakeup events), no more data read or written, and requests from upstream
+drivers are no longer accepted. A given bus or platform may have different
+requirements though.
+
+Examples of hardware wakeup events include an alarm from a real time clock,
+network wake-on-LAN packets, keyboard or mouse activity, and media insertion
+or removal (for PCMCIA, MMC/SD, USB, and so on).
+
+Interfaces for Entering System Sleep States
+===========================================
+
+There are programming interfaces provided for subsystems (bus type, device type,
+device class) and device drivers to allow them to participate in the power
+management of devices they are concerned with. These interfaces cover both
+system sleep and runtime power management.
+
+
+Device Power Management Operations
+----------------------------------
+
+Device power management operations, at the subsystem level as well as at the
+device driver level, are implemented by defining and populating objects of type
+struct dev_pm_ops defined in :file:`include/linux/pm.h`. The roles of the
+methods included in it will be explained in what follows. For now, it should be
+sufficient to remember that the last three methods are specific to runtime power
+management while the remaining ones are used during system-wide power
+transitions.
+
+There also is a deprecated "old" or "legacy" interface for power management
+operations available at least for some subsystems. This approach does not use
+struct dev_pm_ops objects and it is suitable only for implementing system
+sleep power management methods in a limited way. Therefore it is not described
+in this document, so please refer directly to the source code for more
+information about it.
+
+
+Subsystem-Level Methods
+-----------------------
+
+The core methods to suspend and resume devices reside in
+struct dev_pm_ops pointed to by the :c:member:`ops` member of
+struct dev_pm_domain, or by the :c:member:`pm` member of struct bus_type,
+struct device_type and struct class. They are mostly of interest to the
+people writing infrastructure for platforms and buses, like PCI or USB, or
+device type and device class drivers. They also are relevant to the writers of
+device drivers whose subsystems (PM domains, device types, device classes and
+bus types) don't provide all power management methods.
+
+Bus drivers implement these methods as appropriate for the hardware and the
+drivers using it; PCI works differently from USB, and so on. Not many people
+write subsystem-level drivers; most driver code is a "device driver" that builds
+on top of bus-specific framework code.
+
+For more information on these driver calls, see the description later;
+they are called in phases for every device, respecting the parent-child
+sequencing in the driver model tree.
+
+
+:file:`/sys/devices/.../power/wakeup` files
+-------------------------------------------
+
+All device objects in the driver model contain fields that control the handling
+of system wakeup events (hardware signals that can force the system out of a
+sleep state). These fields are initialized by bus or device driver code using
+:c:func:`device_set_wakeup_capable()` and :c:func:`device_set_wakeup_enable()`,
+defined in :file:`include/linux/pm_wakeup.h`.
+
+The :c:member:`power.can_wakeup` flag just records whether the device (and its
+driver) can physically support wakeup events. The
+:c:func:`device_set_wakeup_capable()` routine affects this flag. The
+:c:member:`power.wakeup` field is a pointer to an object of type
+struct wakeup_source used for controlling whether or not the device should use
+its system wakeup mechanism and for notifying the PM core of system wakeup
+events signaled by the device. This object is only present for wakeup-capable
+devices (i.e. devices whose :c:member:`can_wakeup` flags are set) and is created
+(or removed) by :c:func:`device_set_wakeup_capable()`.
+
+Whether or not a device is capable of issuing wakeup events is a hardware
+matter, and the kernel is responsible for keeping track of it. By contrast,
+whether or not a wakeup-capable device should issue wakeup events is a policy
+decision, and it is managed by user space through a sysfs attribute: the
+:file:`power/wakeup` file. User space can write the "enabled" or "disabled"
+strings to it to indicate whether or not, respectively, the device is supposed
+to signal system wakeup. This file is only present if the
+:c:member:`power.wakeup` object exists for the given device and is created (or
+removed) along with that object, by :c:func:`device_set_wakeup_capable()`.
+Reads from the file will return the corresponding string.
+
+The initial value in the :file:`power/wakeup` file is "disabled" for the
+majority of devices; the major exceptions are power buttons, keyboards, and
+Ethernet adapters whose WoL (wake-on-LAN) feature has been set up with ethtool.
+It should also default to "enabled" for devices that don't generate wakeup
+requests on their own but merely forward wakeup requests from one bus to another
+(like PCI Express ports).
+
+The :c:func:`device_may_wakeup()` routine returns true only if the
+:c:member:`power.wakeup` object exists and the corresponding :file:`power/wakeup`
+file contains the "enabled" string. This information is used by subsystems,
+like the PCI bus type code, to see whether or not to enable the devices' wakeup
+mechanisms. If device wakeup mechanisms are enabled or disabled directly by
+drivers, they also should use :c:func:`device_may_wakeup()` to decide what to do
+during a system sleep transition. Device drivers, however, are not expected to
+call :c:func:`device_set_wakeup_enable()` directly in any case.
+
+It ought to be noted that system wakeup is conceptually different from "remote
+wakeup" used by runtime power management, although it may be supported by the
+same physical mechanism. Remote wakeup is a feature allowing devices in
+low-power states to trigger specific interrupts to signal conditions in which
+they should be put into the full-power state. Those interrupts may or may not
+be used to signal system wakeup events, depending on the hardware design. On
+some systems it is impossible to trigger them from system sleep states. In any
+case, remote wakeup should always be enabled for runtime power management for
+all devices and drivers that support it.
+
+
+:file:`/sys/devices/.../power/control` files
+--------------------------------------------
+
+Each device in the driver model has a flag to control whether it is subject to
+runtime power management. This flag, :c:member:`runtime_auto`, is initialized
+by the bus type (or generally subsystem) code using :c:func:`pm_runtime_allow()`
+or :c:func:`pm_runtime_forbid()`; the default is to allow runtime power
+management.
+
+The setting can be adjusted by user space by writing either "on" or "auto" to
+the device's :file:`power/control` sysfs file. Writing "auto" calls
+:c:func:`pm_runtime_allow()`, setting the flag and allowing the device to be
+runtime power-managed by its driver. Writing "on" calls
+:c:func:`pm_runtime_forbid()`, clearing the flag, returning the device to full
+power if it was in a low-power state, and preventing the
+device from being runtime power-managed. User space can check the current value
+of the :c:member:`runtime_auto` flag by reading that file.
+
+The device's :c:member:`runtime_auto` flag has no effect on the handling of
+system-wide power transitions. In particular, the device can (and in the
+majority of cases should and will) be put into a low-power state during a
+system-wide transition to a sleep state even though its :c:member:`runtime_auto`
+flag is clear.
+
+For more information about the runtime power management framework, refer to
+Documentation/power/runtime_pm.rst.
+
+
+Calling Drivers to Enter and Leave System Sleep States
+======================================================
+
+When the system goes into a sleep state, each device's driver is asked to
+suspend the device by putting it into a state compatible with the target
+system state. That's usually some version of "off", but the details are
+system-specific. Also, wakeup-enabled devices will usually stay partly
+functional in order to wake the system.
+
+When the system leaves that low-power state, the device's driver is asked to
+resume it by returning it to full power. The suspend and resume operations
+always go together, and both are multi-phase operations.
+
+For simple drivers, suspend might quiesce the device using class code
+and then turn its hardware as "off" as possible during suspend_noirq. The
+matching resume calls would then completely reinitialize the hardware
+before reactivating its class I/O queues.
+
+More power-aware drivers might prepare the devices for triggering system wakeup
+events.
+
+
+Call Sequence Guarantees
+------------------------
+
+To ensure that bridges and similar links needing to talk to a device are
+available when the device is suspended or resumed, the device hierarchy is
+walked in a bottom-up order to suspend devices. A top-down order is
+used to resume those devices.
+
+The ordering of the device hierarchy is defined by the order in which devices
+get registered: a child can never be registered, probed or resumed before
+its parent; and can't be removed or suspended after that parent.
+
+The policy is that the device hierarchy should match hardware bus topology.
+[Or at least the control bus, for devices which use multiple busses.]
+In particular, this means that a device registration may fail if the parent of
+the device is suspending (i.e. has been chosen by the PM core as the next
+device to suspend) or has already suspended, as well as after all of the other
+devices have been suspended. Device drivers must be prepared to cope with such
+situations.
+
+
+System Power Management Phases
+------------------------------
+
+Suspending or resuming the system is done in several phases. Different phases
+are used for suspend-to-idle, shallow (standby), and deep ("suspend-to-RAM")
+sleep states and the hibernation state ("suspend-to-disk"). Each phase involves
+executing callbacks for every device before the next phase begins. Not all
+buses or classes support all these callbacks and not all drivers use all the
+callbacks. The various phases always run after tasks have been frozen and
+before they are unfrozen. Furthermore, the ``*_noirq`` phases run at a time
+when IRQ handlers have been disabled (except for those marked with the
+IRQF_NO_SUSPEND flag).
+
+All phases use PM domain, bus, type, class or driver callbacks (that is, methods
+defined in ``dev->pm_domain->ops``, ``dev->bus->pm``, ``dev->type->pm``,
+``dev->class->pm`` or ``dev->driver->pm``). These callbacks are regarded by the
+PM core as mutually exclusive. Moreover, PM domain callbacks always take
+precedence over all of the other callbacks and, for example, type callbacks take
+precedence over bus, class and driver callbacks. To be precise, the following
+rules are used to determine which callback to execute in the given phase:
+
+ 1. If ``dev->pm_domain`` is present, the PM core will choose the callback
+ provided by ``dev->pm_domain->ops`` for execution.
+
+ 2. Otherwise, if both ``dev->type`` and ``dev->type->pm`` are present, the
+ callback provided by ``dev->type->pm`` will be chosen for execution.
+
+ 3. Otherwise, if both ``dev->class`` and ``dev->class->pm`` are present,
+ the callback provided by ``dev->class->pm`` will be chosen for
+ execution.
+
+ 4. Otherwise, if both ``dev->bus`` and ``dev->bus->pm`` are present, the
+ callback provided by ``dev->bus->pm`` will be chosen for execution.
+
+This allows PM domains and device types to override callbacks provided by bus
+types or device classes if necessary.
+
+The PM domain, type, class and bus callbacks may in turn invoke device- or
+driver-specific methods stored in ``dev->driver->pm``, but they don't have to do
+that.
+
+If the subsystem callback chosen for execution is not present, the PM core will
+execute the corresponding method from the ``dev->driver->pm`` set instead if
+there is one.
+
+
+Entering System Suspend
+-----------------------
+
+When the system goes into the freeze, standby or memory sleep state,
+the phases are: ``prepare``, ``suspend``, ``suspend_late``, ``suspend_noirq``.
+
+ 1. The ``prepare`` phase is meant to prevent races by preventing new
+ devices from being registered; the PM core would never know that all the
+ children of a device had been suspended if new children could be
+ registered at will. [By contrast, from the PM core's perspective,
+ devices may be unregistered at any time.] Unlike the other
+ suspend-related phases, during the ``prepare`` phase the device
+ hierarchy is traversed top-down.
+
+ After the ``->prepare`` callback method returns, no new children may be
+ registered below the device. The method may also prepare the device or
+ driver in some way for the upcoming system power transition, but it
+ should not put the device into a low-power state. Moreover, if the
+ device supports runtime power management, the ``->prepare`` callback
+ method must not update its state in case it is necessary to resume it
+ from runtime suspend later on.
+
+ For devices supporting runtime power management, the return value of the
+ prepare callback can be used to indicate to the PM core that it may
+ safely leave the device in runtime suspend (if runtime-suspended
+ already), provided that all of the device's descendants are also left in
+ runtime suspend. Namely, if the prepare callback returns a positive
+ number and that happens for all of the descendants of the device too,
+ and all of them (including the device itself) are runtime-suspended, the
+ PM core will skip the ``suspend``, ``suspend_late`` and
+ ``suspend_noirq`` phases as well as all of the corresponding phases of
+ the subsequent device resume for all of these devices. In that case,
+ the ``->complete`` callback will be the next one invoked after the
+ ``->prepare`` callback and is entirely responsible for putting the
+ device into a consistent state as appropriate.
+
+ Note that this direct-complete procedure applies even if the device is
+ disabled for runtime PM; only the runtime-PM status matters. It follows
+ that if a device has system-sleep callbacks but does not support runtime
+ PM, then its prepare callback must never return a positive value. This
+ is because all such devices are initially set to runtime-suspended with
+ runtime PM disabled.
+
+ This feature also can be controlled by device drivers by using the
+ ``DPM_FLAG_NO_DIRECT_COMPLETE`` and ``DPM_FLAG_SMART_PREPARE`` driver
+ power management flags. [Typically, they are set at the time the driver
+ is probed against the device in question by passing them to the
+ :c:func:`dev_pm_set_driver_flags` helper function.] If the first of
+ these flags is set, the PM core will not apply the direct-complete
+ procedure described above to the given device and, consequenty, to any
+ of its ancestors. The second flag, when set, informs the middle layer
+ code (bus types, device types, PM domains, classes) that it should take
+ the return value of the ``->prepare`` callback provided by the driver
+ into account and it may only return a positive value from its own
+ ``->prepare`` callback if the driver's one also has returned a positive
+ value.
+
+ 2. The ``->suspend`` methods should quiesce the device to stop it from
+ performing I/O. They also may save the device registers and put it into
+ the appropriate low-power state, depending on the bus type the device is
+ on, and they may enable wakeup events.
+
+ However, for devices supporting runtime power management, the
+ ``->suspend`` methods provided by subsystems (bus types and PM domains
+ in particular) must follow an additional rule regarding what can be done
+ to the devices before their drivers' ``->suspend`` methods are called.
+ Namely, they may resume the devices from runtime suspend by
+ calling :c:func:`pm_runtime_resume` for them, if that is necessary, but
+ they must not update the state of the devices in any other way at that
+ time (in case the drivers need to resume the devices from runtime
+ suspend in their ``->suspend`` methods). In fact, the PM core prevents
+ subsystems or drivers from putting devices into runtime suspend at
+ these times by calling :c:func:`pm_runtime_get_noresume` before issuing
+ the ``->prepare`` callback (and calling :c:func:`pm_runtime_put` after
+ issuing the ``->complete`` callback).
+
+ 3. For a number of devices it is convenient to split suspend into the
+ "quiesce device" and "save device state" phases, in which cases
+ ``suspend_late`` is meant to do the latter. It is always executed after
+ runtime power management has been disabled for the device in question.
+
+ 4. The ``suspend_noirq`` phase occurs after IRQ handlers have been disabled,
+ which means that the driver's interrupt handler will not be called while
+ the callback method is running. The ``->suspend_noirq`` methods should
+ save the values of the device's registers that weren't saved previously
+ and finally put the device into the appropriate low-power state.
+
+ The majority of subsystems and device drivers need not implement this
+ callback. However, bus types allowing devices to share interrupt
+ vectors, like PCI, generally need it; otherwise a driver might encounter
+ an error during the suspend phase by fielding a shared interrupt
+ generated by some other device after its own device had been set to low
+ power.
+
+At the end of these phases, drivers should have stopped all I/O transactions
+(DMA, IRQs), saved enough state that they can re-initialize or restore previous
+state (as needed by the hardware), and placed the device into a low-power state.
+On many platforms they will gate off one or more clock sources; sometimes they
+will also switch off power supplies or reduce voltages. [Drivers supporting
+runtime PM may already have performed some or all of these steps.]
+
+If :c:func:`device_may_wakeup()` returns ``true``, the device should be
+prepared for generating hardware wakeup signals to trigger a system wakeup event
+when the system is in the sleep state. For example, :c:func:`enable_irq_wake()`
+might identify GPIO signals hooked up to a switch or other external hardware,
+and :c:func:`pci_enable_wake()` does something similar for the PCI PME signal.
+
+If any of these callbacks returns an error, the system won't enter the desired
+low-power state. Instead, the PM core will unwind its actions by resuming all
+the devices that were suspended.
+
+
+Leaving System Suspend
+----------------------
+
+When resuming from freeze, standby or memory sleep, the phases are:
+``resume_noirq``, ``resume_early``, ``resume``, ``complete``.
+
+ 1. The ``->resume_noirq`` callback methods should perform any actions
+ needed before the driver's interrupt handlers are invoked. This
+ generally means undoing the actions of the ``suspend_noirq`` phase. If
+ the bus type permits devices to share interrupt vectors, like PCI, the
+ method should bring the device and its driver into a state in which the
+ driver can recognize if the device is the source of incoming interrupts,
+ if any, and handle them correctly.
+
+ For example, the PCI bus type's ``->pm.resume_noirq()`` puts the device
+ into the full-power state (D0 in the PCI terminology) and restores the
+ standard configuration registers of the device. Then it calls the
+ device driver's ``->pm.resume_noirq()`` method to perform device-specific
+ actions.
+
+ 2. The ``->resume_early`` methods should prepare devices for the execution
+ of the resume methods. This generally involves undoing the actions of
+ the preceding ``suspend_late`` phase.
+
+ 3. The ``->resume`` methods should bring the device back to its operating
+ state, so that it can perform normal I/O. This generally involves
+ undoing the actions of the ``suspend`` phase.
+
+ 4. The ``complete`` phase should undo the actions of the ``prepare`` phase.
+ For this reason, unlike the other resume-related phases, during the
+ ``complete`` phase the device hierarchy is traversed bottom-up.
+
+ Note, however, that new children may be registered below the device as
+ soon as the ``->resume`` callbacks occur; it's not necessary to wait
+ until the ``complete`` phase runs.
+
+ Moreover, if the preceding ``->prepare`` callback returned a positive
+ number, the device may have been left in runtime suspend throughout the
+ whole system suspend and resume (its ``->suspend``, ``->suspend_late``,
+ ``->suspend_noirq``, ``->resume_noirq``,
+ ``->resume_early``, and ``->resume`` callbacks may have been
+ skipped). In that case, the ``->complete`` callback is entirely
+ responsible for putting the device into a consistent state after system
+ suspend if necessary. [For example, it may need to queue up a runtime
+ resume request for the device for this purpose.] To check if that is
+ the case, the ``->complete`` callback can consult the device's
+ ``power.direct_complete`` flag. If that flag is set when the
+ ``->complete`` callback is being run then the direct-complete mechanism
+ was used, and special actions may be required to make the device work
+ correctly afterward.
+
+At the end of these phases, drivers should be as functional as they were before
+suspending: I/O can be performed using DMA and IRQs, and the relevant clocks are
+gated on.
+
+However, the details here may again be platform-specific. For example,
+some systems support multiple "run" states, and the mode in effect at
+the end of resume might not be the one which preceded suspension.
+That means availability of certain clocks or power supplies changed,
+which could easily affect how a driver works.
+
+Drivers need to be able to handle hardware which has been reset since all of the
+suspend methods were called, for example by complete reinitialization.
+This may be the hardest part, and the one most protected by NDA'd documents
+and chip errata. It's simplest if the hardware state hasn't changed since
+the suspend was carried out, but that can only be guaranteed if the target
+system sleep entered was suspend-to-idle. For the other system sleep states
+that may not be the case (and usually isn't for ACPI-defined system sleep
+states, like S3).
+
+Drivers must also be prepared to notice that the device has been removed
+while the system was powered down, whenever that's physically possible.
+PCMCIA, MMC, USB, Firewire, SCSI, and even IDE are common examples of busses
+where common Linux platforms will see such removal. Details of how drivers
+will notice and handle such removals are currently bus-specific, and often
+involve a separate thread.
+
+These callbacks may return an error value, but the PM core will ignore such
+errors since there's nothing it can do about them other than printing them in
+the system log.
+
+
+Entering Hibernation
+--------------------
+
+Hibernating the system is more complicated than putting it into sleep states,
+because it involves creating and saving a system image. Therefore there are
+more phases for hibernation, with a different set of callbacks. These phases
+always run after tasks have been frozen and enough memory has been freed.
+
+The general procedure for hibernation is to quiesce all devices ("freeze"),
+create an image of the system memory while everything is stable, reactivate all
+devices ("thaw"), write the image to permanent storage, and finally shut down
+the system ("power off"). The phases used to accomplish this are: ``prepare``,
+``freeze``, ``freeze_late``, ``freeze_noirq``, ``thaw_noirq``, ``thaw_early``,
+``thaw``, ``complete``, ``prepare``, ``poweroff``, ``poweroff_late``,
+``poweroff_noirq``.
+
+ 1. The ``prepare`` phase is discussed in the "Entering System Suspend"
+ section above.
+
+ 2. The ``->freeze`` methods should quiesce the device so that it doesn't
+ generate IRQs or DMA, and they may need to save the values of device
+ registers. However the device does not have to be put in a low-power
+ state, and to save time it's best not to do so. Also, the device should
+ not be prepared to generate wakeup events.
+
+ 3. The ``freeze_late`` phase is analogous to the ``suspend_late`` phase
+ described earlier, except that the device should not be put into a
+ low-power state and should not be allowed to generate wakeup events.
+
+ 4. The ``freeze_noirq`` phase is analogous to the ``suspend_noirq`` phase
+ discussed earlier, except again that the device should not be put into
+ a low-power state and should not be allowed to generate wakeup events.
+
+At this point the system image is created. All devices should be inactive and
+the contents of memory should remain undisturbed while this happens, so that the
+image forms an atomic snapshot of the system state.
+
+ 5. The ``thaw_noirq`` phase is analogous to the ``resume_noirq`` phase
+ discussed earlier. The main difference is that its methods can assume
+ the device is in the same state as at the end of the ``freeze_noirq``
+ phase.
+
+ 6. The ``thaw_early`` phase is analogous to the ``resume_early`` phase
+ described above. Its methods should undo the actions of the preceding
+ ``freeze_late``, if necessary.
+
+ 7. The ``thaw`` phase is analogous to the ``resume`` phase discussed
+ earlier. Its methods should bring the device back to an operating
+ state, so that it can be used for saving the image if necessary.
+
+ 8. The ``complete`` phase is discussed in the "Leaving System Suspend"
+ section above.
+
+At this point the system image is saved, and the devices then need to be
+prepared for the upcoming system shutdown. This is much like suspending them
+before putting the system into the suspend-to-idle, shallow or deep sleep state,
+and the phases are similar.
+
+ 9. The ``prepare`` phase is discussed above.
+
+ 10. The ``poweroff`` phase is analogous to the ``suspend`` phase.
+
+ 11. The ``poweroff_late`` phase is analogous to the ``suspend_late`` phase.
+
+ 12. The ``poweroff_noirq`` phase is analogous to the ``suspend_noirq`` phase.
+
+The ``->poweroff``, ``->poweroff_late`` and ``->poweroff_noirq`` callbacks
+should do essentially the same things as the ``->suspend``, ``->suspend_late``
+and ``->suspend_noirq`` callbacks, respectively. A notable difference is
+that they need not store the device register values, because the registers
+should already have been stored during the ``freeze``, ``freeze_late`` or
+``freeze_noirq`` phases. Also, on many machines the firmware will power-down
+the entire system, so it is not necessary for the callback to put the device in
+a low-power state.
+
+
+Leaving Hibernation
+-------------------
+
+Resuming from hibernation is, again, more complicated than resuming from a sleep
+state in which the contents of main memory are preserved, because it requires
+a system image to be loaded into memory and the pre-hibernation memory contents
+to be restored before control can be passed back to the image kernel.
+
+Although in principle the image might be loaded into memory and the
+pre-hibernation memory contents restored by the boot loader, in practice this
+can't be done because boot loaders aren't smart enough and there is no
+established protocol for passing the necessary information. So instead, the
+boot loader loads a fresh instance of the kernel, called "the restore kernel",
+into memory and passes control to it in the usual way. Then the restore kernel
+reads the system image, restores the pre-hibernation memory contents, and passes
+control to the image kernel. Thus two different kernel instances are involved
+in resuming from hibernation. In fact, the restore kernel may be completely
+different from the image kernel: a different configuration and even a different
+version. This has important consequences for device drivers and their
+subsystems.
+
+To be able to load the system image into memory, the restore kernel needs to
+include at least a subset of device drivers allowing it to access the storage
+medium containing the image, although it doesn't need to include all of the
+drivers present in the image kernel. After the image has been loaded, the
+devices managed by the boot kernel need to be prepared for passing control back
+to the image kernel. This is very similar to the initial steps involved in
+creating a system image, and it is accomplished in the same way, using
+``prepare``, ``freeze``, and ``freeze_noirq`` phases. However, the devices
+affected by these phases are only those having drivers in the restore kernel;
+other devices will still be in whatever state the boot loader left them.
+
+Should the restoration of the pre-hibernation memory contents fail, the restore
+kernel would go through the "thawing" procedure described above, using the
+``thaw_noirq``, ``thaw_early``, ``thaw``, and ``complete`` phases, and then
+continue running normally. This happens only rarely. Most often the
+pre-hibernation memory contents are restored successfully and control is passed
+to the image kernel, which then becomes responsible for bringing the system back
+to the working state.
+
+To achieve this, the image kernel must restore the devices' pre-hibernation
+functionality. The operation is much like waking up from a sleep state (with
+the memory contents preserved), although it involves different phases:
+``restore_noirq``, ``restore_early``, ``restore``, ``complete``.
+
+ 1. The ``restore_noirq`` phase is analogous to the ``resume_noirq`` phase.
+
+ 2. The ``restore_early`` phase is analogous to the ``resume_early`` phase.
+
+ 3. The ``restore`` phase is analogous to the ``resume`` phase.
+
+ 4. The ``complete`` phase is discussed above.
+
+The main difference from ``resume[_early|_noirq]`` is that
+``restore[_early|_noirq]`` must assume the device has been accessed and
+reconfigured by the boot loader or the restore kernel. Consequently, the state
+of the device may be different from the state remembered from the ``freeze``,
+``freeze_late`` and ``freeze_noirq`` phases. The device may even need to be
+reset and completely re-initialized. In many cases this difference doesn't
+matter, so the ``->resume[_early|_noirq]`` and ``->restore[_early|_norq]``
+method pointers can be set to the same routines. Nevertheless, different
+callback pointers are used in case there is a situation where it actually does
+matter.
+
+
+Power Management Notifiers
+==========================
+
+There are some operations that cannot be carried out by the power management
+callbacks discussed above, because the callbacks occur too late or too early.
+To handle these cases, subsystems and device drivers may register power
+management notifiers that are called before tasks are frozen and after they have
+been thawed. Generally speaking, the PM notifiers are suitable for performing
+actions that either require user space to be available, or at least won't
+interfere with user space.
+
+For details refer to Documentation/driver-api/pm/notifiers.rst.
+
+
+Device Low-Power (suspend) States
+=================================
+
+Device low-power states aren't standard. One device might only handle
+"on" and "off", while another might support a dozen different versions of
+"on" (how many engines are active?), plus a state that gets back to "on"
+faster than from a full "off".
+
+Some buses define rules about what different suspend states mean. PCI
+gives one example: after the suspend sequence completes, a non-legacy
+PCI device may not perform DMA or issue IRQs, and any wakeup events it
+issues would be issued through the PME# bus signal. Plus, there are
+several PCI-standard device states, some of which are optional.
+
+In contrast, integrated system-on-chip processors often use IRQs as the
+wakeup event sources (so drivers would call :c:func:`enable_irq_wake`) and
+might be able to treat DMA completion as a wakeup event (sometimes DMA can stay
+active too, it'd only be the CPU and some peripherals that sleep).
+
+Some details here may be platform-specific. Systems may have devices that
+can be fully active in certain sleep states, such as an LCD display that's
+refreshed using DMA while most of the system is sleeping lightly ... and
+its frame buffer might even be updated by a DSP or other non-Linux CPU while
+the Linux control processor stays idle.
+
+Moreover, the specific actions taken may depend on the target system state.
+One target system state might allow a given device to be very operational;
+another might require a hard shut down with re-initialization on resume.
+And two different target systems might use the same device in different
+ways; the aforementioned LCD might be active in one product's "standby",
+but a different product using the same SOC might work differently.
+
+
+Device Power Management Domains
+===============================
+
+Sometimes devices share reference clocks or other power resources. In those
+cases it generally is not possible to put devices into low-power states
+individually. Instead, a set of devices sharing a power resource can be put
+into a low-power state together at the same time by turning off the shared
+power resource. Of course, they also need to be put into the full-power state
+together, by turning the shared power resource on. A set of devices with this
+property is often referred to as a power domain. A power domain may also be
+nested inside another power domain. The nested domain is referred to as the
+sub-domain of the parent domain.
+
+Support for power domains is provided through the :c:member:`pm_domain` field of
+struct device. This field is a pointer to an object of type
+struct dev_pm_domain, defined in :file:`include/linux/pm.h`, providing a set
+of power management callbacks analogous to the subsystem-level and device driver
+callbacks that are executed for the given device during all power transitions,
+instead of the respective subsystem-level callbacks. Specifically, if a
+device's :c:member:`pm_domain` pointer is not NULL, the ``->suspend()`` callback
+from the object pointed to by it will be executed instead of its subsystem's
+(e.g. bus type's) ``->suspend()`` callback and analogously for all of the
+remaining callbacks. In other words, power management domain callbacks, if
+defined for the given device, always take precedence over the callbacks provided
+by the device's subsystem (e.g. bus type).
+
+The support for device power management domains is only relevant to platforms
+needing to use the same device driver power management callbacks in many
+different power domain configurations and wanting to avoid incorporating the
+support for power domains into subsystem-level callbacks, for example by
+modifying the platform bus type. Other platforms need not implement it or take
+it into account in any way.
+
+Devices may be defined as IRQ-safe which indicates to the PM core that their
+runtime PM callbacks may be invoked with disabled interrupts (see
+Documentation/power/runtime_pm.rst for more information). If an
+IRQ-safe device belongs to a PM domain, the runtime PM of the domain will be
+disallowed, unless the domain itself is defined as IRQ-safe. However, it
+makes sense to define a PM domain as IRQ-safe only if all the devices in it
+are IRQ-safe. Moreover, if an IRQ-safe domain has a parent domain, the runtime
+PM of the parent is only allowed if the parent itself is IRQ-safe too with the
+additional restriction that all child domains of an IRQ-safe parent must also
+be IRQ-safe.
+
+
+Runtime Power Management
+========================
+
+Many devices are able to dynamically power down while the system is still
+running. This feature is useful for devices that are not being used, and
+can offer significant power savings on a running system. These devices
+often support a range of runtime power states, which might use names such
+as "off", "sleep", "idle", "active", and so on. Those states will in some
+cases (like PCI) be partially constrained by the bus the device uses, and will
+usually include hardware states that are also used in system sleep states.
+
+A system-wide power transition can be started while some devices are in low
+power states due to runtime power management. The system sleep PM callbacks
+should recognize such situations and react to them appropriately, but the
+necessary actions are subsystem-specific.
+
+In some cases the decision may be made at the subsystem level while in other
+cases the device driver may be left to decide. In some cases it may be
+desirable to leave a suspended device in that state during a system-wide power
+transition, but in other cases the device must be put back into the full-power
+state temporarily, for example so that its system wakeup capability can be
+disabled. This all depends on the hardware and the design of the subsystem and
+device driver in question.
+
+If it is necessary to resume a device from runtime suspend during a system-wide
+transition into a sleep state, that can be done by calling
+:c:func:`pm_runtime_resume` from the ``->suspend`` callback (or the ``->freeze``
+or ``->poweroff`` callback for transitions related to hibernation) of either the
+device's driver or its subsystem (for example, a bus type or a PM domain).
+However, subsystems must not otherwise change the runtime status of devices
+from their ``->prepare`` and ``->suspend`` callbacks (or equivalent) *before*
+invoking device drivers' ``->suspend`` callbacks (or equivalent).
+
+.. _smart_suspend_flag:
+
+The ``DPM_FLAG_SMART_SUSPEND`` Driver Flag
+------------------------------------------
+
+Some bus types and PM domains have a policy to resume all devices from runtime
+suspend upfront in their ``->suspend`` callbacks, but that may not be really
+necessary if the device's driver can cope with runtime-suspended devices.
+The driver can indicate this by setting ``DPM_FLAG_SMART_SUSPEND`` in
+:c:member:`power.driver_flags` at probe time, with the assistance of the
+:c:func:`dev_pm_set_driver_flags` helper routine.
+
+Setting that flag causes the PM core and middle-layer code
+(bus types, PM domains etc.) to skip the ``->suspend_late`` and
+``->suspend_noirq`` callbacks provided by the driver if the device remains in
+runtime suspend throughout those phases of the system-wide suspend (and
+similarly for the "freeze" and "poweroff" parts of system hibernation).
+[Otherwise the same driver
+callback might be executed twice in a row for the same device, which would not
+be valid in general.] If the middle-layer system-wide PM callbacks are present
+for the device then they are responsible for skipping these driver callbacks;
+if not then the PM core skips them. The subsystem callback routines can
+determine whether they need to skip the driver callbacks by testing the return
+value from the :c:func:`dev_pm_skip_suspend` helper function.
+
+In addition, with ``DPM_FLAG_SMART_SUSPEND`` set, the driver's ``->thaw_noirq``
+and ``->thaw_early`` callbacks are skipped in hibernation if the device remained
+in runtime suspend throughout the preceding "freeze" transition. Again, if the
+middle-layer callbacks are present for the device, they are responsible for
+doing this, otherwise the PM core takes care of it.
+
+
+The ``DPM_FLAG_MAY_SKIP_RESUME`` Driver Flag
+--------------------------------------------
+
+During system-wide resume from a sleep state it's easiest to put devices into
+the full-power state, as explained in Documentation/power/runtime_pm.rst.
+[Refer to that document for more information regarding this particular issue as
+well as for information on the device runtime power management framework in
+general.] However, it often is desirable to leave devices in suspend after
+system transitions to the working state, especially if those devices had been in
+runtime suspend before the preceding system-wide suspend (or analogous)
+transition.
+
+To that end, device drivers can use the ``DPM_FLAG_MAY_SKIP_RESUME`` flag to
+indicate to the PM core and middle-layer code that they allow their "noirq" and
+"early" resume callbacks to be skipped if the device can be left in suspend
+after system-wide PM transitions to the working state. Whether or not that is
+the case generally depends on the state of the device before the given system
+suspend-resume cycle and on the type of the system transition under way.
+In particular, the "thaw" and "restore" transitions related to hibernation are
+not affected by ``DPM_FLAG_MAY_SKIP_RESUME`` at all. [All callbacks are
+issued during the "restore" transition regardless of the flag settings,
+and whether or not any driver callbacks
+are skipped during the "thaw" transition depends whether or not the
+``DPM_FLAG_SMART_SUSPEND`` flag is set (see `above <smart_suspend_flag_>`_).
+In addition, a device is not allowed to remain in runtime suspend if any of its
+children will be returned to full power.]
+
+The ``DPM_FLAG_MAY_SKIP_RESUME`` flag is taken into account in combination with
+the :c:member:`power.may_skip_resume` status bit set by the PM core during the
+"suspend" phase of suspend-type transitions. If the driver or the middle layer
+has a reason to prevent the driver's "noirq" and "early" resume callbacks from
+being skipped during the subsequent system resume transition, it should
+clear :c:member:`power.may_skip_resume` in its ``->suspend``, ``->suspend_late``
+or ``->suspend_noirq`` callback. [Note that the drivers setting
+``DPM_FLAG_SMART_SUSPEND`` need to clear :c:member:`power.may_skip_resume` in
+their ``->suspend`` callback in case the other two are skipped.]
+
+Setting the :c:member:`power.may_skip_resume` status bit along with the
+``DPM_FLAG_MAY_SKIP_RESUME`` flag is necessary, but generally not sufficient,
+for the driver's "noirq" and "early" resume callbacks to be skipped. Whether or
+not they should be skipped can be determined by evaluating the
+:c:func:`dev_pm_skip_resume` helper function.
+
+If that function returns ``true``, the driver's "noirq" and "early" resume
+callbacks should be skipped and the device's runtime PM status will be set to
+"suspended" by the PM core. Otherwise, if the device was runtime-suspended
+during the preceding system-wide suspend transition and its
+``DPM_FLAG_SMART_SUSPEND`` is set, its runtime PM status will be set to
+"active" by the PM core. [Hence, the drivers that do not set
+``DPM_FLAG_SMART_SUSPEND`` should not expect the runtime PM status of their
+devices to be changed from "suspended" to "active" by the PM core during
+system-wide resume-type transitions.]
+
+If the ``DPM_FLAG_MAY_SKIP_RESUME`` flag is not set for a device, but
+``DPM_FLAG_SMART_SUSPEND`` is set and the driver's "late" and "noirq" suspend
+callbacks are skipped, its system-wide "noirq" and "early" resume callbacks, if
+present, are invoked as usual and the device's runtime PM status is set to
+"active" by the PM core before enabling runtime PM for it. In that case, the
+driver must be prepared to cope with the invocation of its system-wide resume
+callbacks back-to-back with its ``->runtime_suspend`` one (without the
+intervening ``->runtime_resume`` and system-wide suspend callbacks) and the
+final state of the device must reflect the "active" runtime PM status in that
+case. [Note that this is not a problem at all if the driver's
+``->suspend_late`` callback pointer points to the same function as its
+``->runtime_suspend`` one and its ``->resume_early`` callback pointer points to
+the same function as the ``->runtime_resume`` one, while none of the other
+system-wide suspend-resume callbacks of the driver are present, for example.]
+
+Likewise, if ``DPM_FLAG_MAY_SKIP_RESUME`` is set for a device, its driver's
+system-wide "noirq" and "early" resume callbacks may be skipped while its "late"
+and "noirq" suspend callbacks may have been executed (in principle, regardless
+of whether or not ``DPM_FLAG_SMART_SUSPEND`` is set). In that case, the driver
+needs to be able to cope with the invocation of its ``->runtime_resume``
+callback back-to-back with its "late" and "noirq" suspend ones. [For instance,
+that is not a concern if the driver sets both ``DPM_FLAG_SMART_SUSPEND`` and
+``DPM_FLAG_MAY_SKIP_RESUME`` and uses the same pair of suspend/resume callback
+functions for runtime PM and system-wide suspend/resume.]
diff --git a/Documentation/driver-api/pm/index.rst b/Documentation/driver-api/pm/index.rst
new file mode 100644
index 0000000000..c2a9ef8d11
--- /dev/null
+++ b/Documentation/driver-api/pm/index.rst
@@ -0,0 +1,19 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================
+CPU and Device Power Management
+===============================
+
+.. toctree::
+
+ cpuidle
+ devices
+ notifiers
+ types
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/driver-api/pm/notifiers.rst b/Documentation/driver-api/pm/notifiers.rst
new file mode 100644
index 0000000000..186435c43b
--- /dev/null
+++ b/Documentation/driver-api/pm/notifiers.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+=============================
+Suspend/Hibernation Notifiers
+=============================
+
+:Copyright: |copy| 2016 Intel Corporation
+
+:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+There are some operations that subsystems or drivers may want to carry out
+before hibernation/suspend or after restore/resume, but they require the system
+to be fully functional, so the drivers' and subsystems' ``->suspend()`` and
+``->resume()`` or even ``->prepare()`` and ``->complete()`` callbacks are not
+suitable for this purpose.
+
+For example, device drivers may want to upload firmware to their devices after
+resume/restore, but they cannot do it by calling :c:func:`request_firmware()`
+from their ``->resume()`` or ``->complete()`` callback routines (user land
+processes are frozen at these points). The solution may be to load the firmware
+into memory before processes are frozen and upload it from there in the
+``->resume()`` routine. A suspend/hibernation notifier may be used for that.
+
+Subsystems or drivers having such needs can register suspend notifiers that
+will be called upon the following events by the PM core:
+
+``PM_HIBERNATION_PREPARE``
+ The system is going to hibernate, tasks will be frozen immediately. This
+ is different from ``PM_SUSPEND_PREPARE`` below, because in this case
+ additional work is done between the notifiers and the invocation of PM
+ callbacks for the "freeze" transition.
+
+``PM_POST_HIBERNATION``
+ The system memory state has been restored from a hibernation image or an
+ error occurred during hibernation. Device restore callbacks have been
+ executed and tasks have been thawed.
+
+``PM_RESTORE_PREPARE``
+ The system is going to restore a hibernation image. If all goes well,
+ the restored image kernel will issue a ``PM_POST_HIBERNATION``
+ notification.
+
+``PM_POST_RESTORE``
+ An error occurred during restore from hibernation. Device restore
+ callbacks have been executed and tasks have been thawed.
+
+``PM_SUSPEND_PREPARE``
+ The system is preparing for suspend.
+
+``PM_POST_SUSPEND``
+ The system has just resumed or an error occurred during suspend. Device
+ resume callbacks have been executed and tasks have been thawed.
+
+It is generally assumed that whatever the notifiers do for
+``PM_HIBERNATION_PREPARE``, should be undone for ``PM_POST_HIBERNATION``.
+Analogously, operations carried out for ``PM_SUSPEND_PREPARE`` should be
+reversed for ``PM_POST_SUSPEND``.
+
+Moreover, if one of the notifiers fails for the ``PM_HIBERNATION_PREPARE`` or
+``PM_SUSPEND_PREPARE`` event, the notifiers that have already succeeded for that
+event will be called for ``PM_POST_HIBERNATION`` or ``PM_POST_SUSPEND``,
+respectively.
+
+The hibernation and suspend notifiers are called with :c:data:`pm_mutex` held.
+They are defined in the usual way, but their last argument is meaningless (it is
+always NULL).
+
+To register and/or unregister a suspend notifier use
+:c:func:`register_pm_notifier()` and :c:func:`unregister_pm_notifier()`,
+respectively (both defined in :file:`include/linux/suspend.h`). If you don't
+need to unregister the notifier, you can also use the :c:func:`pm_notifier()`
+macro defined in :file:`include/linux/suspend.h`.
diff --git a/Documentation/driver-api/pm/types.rst b/Documentation/driver-api/pm/types.rst
new file mode 100644
index 0000000000..73a231caf7
--- /dev/null
+++ b/Documentation/driver-api/pm/types.rst
@@ -0,0 +1,7 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
+Device Power Management Data Types
+==================================
+
+.. kernel-doc:: include/linux/pm.h