Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 155 insertions, 0 deletions

diff --git a/Documentation/fb/intelfb.rst b/Documentation/fb/intelfb.rst
new file mode 100644
index 0000000000..e2d0903f4e
--- /dev/null
+++ b/Documentation/fb/intelfb.rst
@@ -0,0 +1,155 @@
+=============================================================
+Intel 830M/845G/852GM/855GM/865G/915G/945G Framebuffer driver
+=============================================================
+
+A. Introduction
+===============
+
+This is a framebuffer driver for various Intel 8xx/9xx compatible
+graphics devices.  These would include:
+
+	- Intel 830M
+	- Intel 845G
+	- Intel 852GM
+	- Intel 855GM
+	- Intel 865G
+	- Intel 915G
+	- Intel 915GM
+	- Intel 945G
+	- Intel 945GM
+	- Intel 945GME
+	- Intel 965G
+	- Intel 965GM
+
+B.  List of available options
+=============================
+
+   a. "video=intelfb"
+	enables the intelfb driver
+
+	Recommendation: required
+
+   b. "mode=<xres>x<yres>[-<bpp>][@<refresh>]"
+	select mode
+
+	Recommendation: user preference
+	(default = 1024x768-32@70)
+
+   c. "vram=<value>"
+	select amount of system RAM in MB to allocate for the video memory
+	if not enough RAM was already allocated by the BIOS.
+
+	Recommendation: 1 - 4 MB.
+	(default = 4 MB)
+
+   d. "voffset=<value>"
+	select at what offset in MB of the logical memory to allocate the
+	framebuffer memory.  The intent is to avoid the memory blocks
+	used by standard graphics applications (XFree86). Depending on your
+	usage, adjust the value up or down, (0 for maximum usage, 63/127 MB
+	for the least amount).  Note, an arbitrary setting may conflict
+	with XFree86.
+
+	Recommendation: do not set
+	(default = 48 MB)
+
+   e. "accel"
+	enable text acceleration.  This can be enabled/reenabled anytime
+	by using 'fbset -accel true/false'.
+
+	Recommendation: enable
+	(default = set)
+
+   f. "hwcursor"
+	enable cursor acceleration.
+
+	Recommendation: enable
+	(default = set)
+
+   g. "mtrr"
+	enable MTRR.  This allows data transfers to the framebuffer memory
+	to occur in bursts which can significantly increase performance.
+	Not very helpful with the intel chips because of 'shared memory'.
+
+	Recommendation: set
+	(default = set)
+
+   h. "fixed"
+	disable mode switching.
+
+	Recommendation: do not set
+	(default = not set)
+
+   The binary parameters can be unset with a "no" prefix, example "noaccel".
+   The default parameter (not named) is the mode.
+
+C. Kernel booting
+=================
+
+Separate each option/option-pair by commas (,) and the option from its value
+with an equals sign (=) as in the following::
+
+	video=intelfb:option1,option2=value2
+
+Sample Usage
+------------
+
+In /etc/lilo.conf, add the line::
+
+	append="video=intelfb:mode=800x600-32@75,accel,hwcursor,vram=8"
+
+This will initialize the framebuffer to 800x600 at 32bpp and 75Hz. The
+framebuffer will use 8 MB of System RAM. hw acceleration of text and cursor
+will be enabled.
+
+Remarks
+-------
+
+If setting this parameter doesn't work (you stay in a 80x25 text-mode),
+you might need to set the "vga=<mode>" parameter too - see vesafb.txt
+in this directory.
+
+
+D.  Module options
+==================
+
+The module parameters are essentially similar to the kernel
+parameters. The main difference is that you need to include a Boolean value
+(1 for TRUE, and 0 for FALSE) for those options which don't need a value.
+
+Example, to enable MTRR, include "mtrr=1".
+
+Sample Usage
+------------
+
+Using the same setup as described above, load the module like this::
+
+	modprobe intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
+
+Or just add the following to a configuration file in /etc/modprobe.d/::
+
+	options intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
+
+and just do a::
+
+	modprobe intelfb
+
+
+E.  Acknowledgment:
+===================
+
+	1.  Geert Uytterhoeven - his excellent howto and the virtual
+	    framebuffer driver code made this possible.
+
+	2.  Jeff Hartmann for his agpgart code.
+
+	3.  David Dawes for his original kernel 2.4 code.
+
+	4.  The X developers.  Insights were provided just by reading the
+	    XFree86 source code.
+
+	5.  Antonino A. Daplas for his inspiring i810fb driver.
+
+	6.  Andrew Morton for his kernel patches maintenance.
+
+Sylvain