Merging upstream version 6.8.9.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 0 insertions, 156 deletions

diff --git a/Documentation/fb/index.rst b/Documentation/fb/index.rst
index baf02393d8..33e3c49f88 100644
--- a/Documentation/fb/index.rst
+++ b/Documentation/fb/index.rst
@@ -19,7 +19,6 @@ Frame Buffer
     framebuffer
     gxfb
     intel810
-    intelfb
     internals
     lxfb
     matroxfb
diff --git a/Documentation/fb/intelfb.rst b/Documentation/fb/intelfb.rst
deleted file mode 100644
index e2d0903f4e..0000000000
--- a/Documentation/fb/intelfb.rst
+++ /dev/null
@@ -1,155 +0,0 @@
-=============================================================
-Intel 830M/845G/852GM/855GM/865G/915G/945G Framebuffer driver
-=============================================================
-
-A. Introduction
-===============
-
-This is a framebuffer driver for various Intel 8xx/9xx compatible
-graphics devices.  These would include:
-
-	- Intel 830M
-	- Intel 845G
-	- Intel 852GM
-	- Intel 855GM
-	- Intel 865G
-	- Intel 915G
-	- Intel 915GM
-	- Intel 945G
-	- Intel 945GM
-	- Intel 945GME
-	- Intel 965G
-	- Intel 965GM
-
-B.  List of available options
-=============================
-
-   a. "video=intelfb"
-	enables the intelfb driver
-
-	Recommendation: required
-
-   b. "mode=<xres>x<yres>[-<bpp>][@<refresh>]"
-	select mode
-
-	Recommendation: user preference
-	(default = 1024x768-32@70)
-
-   c. "vram=<value>"
-	select amount of system RAM in MB to allocate for the video memory
-	if not enough RAM was already allocated by the BIOS.
-
-	Recommendation: 1 - 4 MB.
-	(default = 4 MB)
-
-   d. "voffset=<value>"
-	select at what offset in MB of the logical memory to allocate the
-	framebuffer memory.  The intent is to avoid the memory blocks
-	used by standard graphics applications (XFree86). Depending on your
-	usage, adjust the value up or down, (0 for maximum usage, 63/127 MB
-	for the least amount).  Note, an arbitrary setting may conflict
-	with XFree86.
-
-	Recommendation: do not set
-	(default = 48 MB)
-
-   e. "accel"
-	enable text acceleration.  This can be enabled/reenabled anytime
-	by using 'fbset -accel true/false'.
-
-	Recommendation: enable
-	(default = set)
-
-   f. "hwcursor"
-	enable cursor acceleration.
-
-	Recommendation: enable
-	(default = set)
-
-   g. "mtrr"
-	enable MTRR.  This allows data transfers to the framebuffer memory
-	to occur in bursts which can significantly increase performance.
-	Not very helpful with the intel chips because of 'shared memory'.
-
-	Recommendation: set
-	(default = set)
-
-   h. "fixed"
-	disable mode switching.
-
-	Recommendation: do not set
-	(default = not set)
-
-   The binary parameters can be unset with a "no" prefix, example "noaccel".
-   The default parameter (not named) is the mode.
-
-C. Kernel booting
-=================
-
-Separate each option/option-pair by commas (,) and the option from its value
-with an equals sign (=) as in the following::
-
-	video=intelfb:option1,option2=value2
-
-Sample Usage
-------------
-
-In /etc/lilo.conf, add the line::
-
-	append="video=intelfb:mode=800x600-32@75,accel,hwcursor,vram=8"
-
-This will initialize the framebuffer to 800x600 at 32bpp and 75Hz. The
-framebuffer will use 8 MB of System RAM. hw acceleration of text and cursor
-will be enabled.
-
-Remarks
--------
-
-If setting this parameter doesn't work (you stay in a 80x25 text-mode),
-you might need to set the "vga=<mode>" parameter too - see vesafb.txt
-in this directory.
-
-
-D.  Module options
-==================
-
-The module parameters are essentially similar to the kernel
-parameters. The main difference is that you need to include a Boolean value
-(1 for TRUE, and 0 for FALSE) for those options which don't need a value.
-
-Example, to enable MTRR, include "mtrr=1".
-
-Sample Usage
-------------
-
-Using the same setup as described above, load the module like this::
-
-	modprobe intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
-
-Or just add the following to a configuration file in /etc/modprobe.d/::
-
-	options intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
-
-and just do a::
-
-	modprobe intelfb
-
-
-E.  Acknowledgment:
-===================
-
-	1.  Geert Uytterhoeven - his excellent howto and the virtual
-	    framebuffer driver code made this possible.
-
-	2.  Jeff Hartmann for his agpgart code.
-
-	3.  David Dawes for his original kernel 2.4 code.
-
-	4.  The X developers.  Insights were provided just by reading the
-	    XFree86 source code.
-
-	5.  Antonino A. Daplas for his inspiring i810fb driver.
-
-	6.  Andrew Morton for his kernel patches maintenance.
-
-Sylvain