Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 79 insertions, 0 deletions

diff --git a/Documentation/hwmon/inspur-ipsps1.rst b/Documentation/hwmon/inspur-ipsps1.rst
new file mode 100644
index 0000000000..4825046ecb
--- /dev/null
+++ b/Documentation/hwmon/inspur-ipsps1.rst
@@ -0,0 +1,79 @@
+Kernel driver inspur-ipsps1
+===========================
+
+Supported chips:
+
+  * Inspur Power System power supply unit
+
+Author: John Wang <wangzqbj@inspur.com>
+
+Description
+-----------
+
+This driver supports Inspur Power System power supplies. This driver
+is a client to the core PMBus driver.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+Sysfs entries
+-------------
+
+The following attributes are supported:
+
+======================= ======================================================
+curr1_input		Measured input current
+curr1_label		"iin"
+curr1_max		Maximum current
+curr1_max_alarm		Current high alarm
+curr2_input		Measured output current in mA.
+curr2_label		"iout1"
+curr2_crit		Critical maximum current
+curr2_crit_alarm	Current critical high alarm
+curr2_max		Maximum current
+curr2_max_alarm		Current high alarm
+
+fan1_alarm		Fan 1 warning.
+fan1_fault		Fan 1 fault.
+fan1_input		Fan 1 speed in RPM.
+
+in1_alarm		Input voltage under-voltage alarm.
+in1_input		Measured input voltage in mV.
+in1_label		"vin"
+in2_input		Measured output voltage in mV.
+in2_label		"vout1"
+in2_lcrit		Critical minimum output voltage
+in2_lcrit_alarm		Output voltage critical low alarm
+in2_max			Maximum output voltage
+in2_max_alarm		Output voltage high alarm
+in2_min			Minimum output voltage
+in2_min_alarm		Output voltage low alarm
+
+power1_alarm		Input fault or alarm.
+power1_input		Measured input power in uW.
+power1_label		"pin"
+power1_max		Input power limit
+power2_max_alarm	Output power high alarm
+power2_max		Output power limit
+power2_input		Measured output power in uW.
+power2_label		"pout"
+
+temp[1-3]_input		Measured temperature
+temp[1-2]_max		Maximum temperature
+temp[1-3]_max_alarm	Temperature high alarm
+
+vendor			Manufacturer name
+model			Product model
+part_number		Product part number
+serial_number		Product serial number
+fw_version		Firmware version
+hw_version		Hardware version
+mode			Work mode. Can be set to active or
+			standby, when set to standby, PSU will
+			automatically switch between standby
+			and redundancy mode.
+======================= ======================================================