Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 90 insertions, 0 deletions

diff --git a/Documentation/hwmon/stpddc60.rst b/Documentation/hwmon/stpddc60.rst
new file mode 100644
index 0000000000..0c31f78fe5
--- /dev/null
+++ b/Documentation/hwmon/stpddc60.rst
@@ -0,0 +1,90 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver stpddc60
+======================
+
+Supported chips:
+
+  * ST STPDDC60
+
+    Prefix: 'stpddc60', 'bmr481'
+
+    Addresses scanned: -
+
+    Datasheet: https://flexpowermodules.com/documents/fpm-techspec-bmr481
+
+Author: Erik Rosen <erik.rosen@metormote.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for ST STPDDC60 controller chip and
+compatible modules.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details
+on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+The vout under- and over-voltage limits are set in relation to the commanded
+output voltage as a positive or negative offset in the interval 50mV to 400mV
+in 50mV steps. This means that the absolute values of the limits will change
+when the commanded output voltage changes. Also, care should be taken when
+writing to those limits since in the worst case the commanded output voltage
+could change at the same time as the limit is written to, which will lead to
+unpredictable results.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Vin, iout, pout and temp limits
+are read-write; all other attributes are read-only.
+
+======================= ========================================================
+in1_label		"vin"
+in1_input		Measured input voltage.
+in1_lcrit		Critical minimum input voltage.
+in1_crit		Critical maximum input voltage.
+in1_lcrit_alarm		Input voltage critical low alarm.
+in1_crit_alarm		Input voltage critical high alarm.
+
+in2_label		"vout1"
+in2_input		Measured output voltage.
+in2_lcrit		Critical minimum output voltage.
+in2_crit		Critical maximum output voltage.
+in2_lcrit_alarm		Critical output voltage critical low alarm.
+in2_crit_alarm		Critical output voltage critical high alarm.
+
+curr1_label		"iout1"
+curr1_input		Measured output current.
+curr1_max		Maximum output current.
+curr1_max_alarm		Output current high alarm.
+curr1_crit		Critical maximum output current.
+curr1_crit_alarm	Output current critical high alarm.
+
+power1_label		"pout1"
+power1_input		Measured output power.
+power1_crit		Critical maximum output power.
+power1_crit_alarm	Output power critical high alarm.
+
+temp1_input		Measured maximum temperature of all phases.
+temp1_max		Maximum temperature limit.
+temp1_max_alarm		High temperature alarm.
+temp1_crit		Critical maximum temperature limit.
+temp1_crit_alarm	Critical maximum temperature alarm.
+======================= ========================================================