Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 43 insertions, 0 deletions

diff --git a/Documentation/hwmon/userspace-tools.rst b/Documentation/hwmon/userspace-tools.rst
new file mode 100644
index 0000000000..bf3797c8e7
--- /dev/null
+++ b/Documentation/hwmon/userspace-tools.rst
@@ -0,0 +1,43 @@
+Userspace tools
+===============
+
+Introduction
+------------
+
+Most mainboards have sensor chips to monitor system health (like temperatures,
+voltages, fans speed). They are often connected through an I2C bus, but some
+are also connected directly through the ISA bus.
+
+The kernel drivers make the data from the sensor chips available in the /sys
+virtual filesystem. Userspace tools are then used to display the measured
+values or configure the chips in a more friendly manner.
+
+Lm-sensors
+----------
+
+Core set of utilities that will allow you to obtain health information,
+setup monitoring limits etc. You can get them on their homepage
+http://www.lm-sensors.org/ or as a package from your Linux distribution.
+
+If from website:
+Get lm-sensors from project web site. Please note, you need only userspace
+part, so compile with "make user" and install with "make user_install".
+
+General hints to get things working:
+
+0) get lm-sensors userspace utils
+1) compile all drivers in I2C and Hardware Monitoring sections as modules
+   in your kernel
+2) run sensors-detect script, it will tell you what modules you need to load.
+3) load them and run "sensors" command, you should see some results.
+4) fix sensors.conf, labels, limits, fan divisors
+5) if any more problems consult FAQ, or documentation
+
+Other utilities
+---------------
+
+If you want some graphical indicators of system health look for applications
+like: gkrellm, ksensors, xsensors, wmtemp, wmsensors, wmgtemp, ksysguardd,
+hardware-monitor
+
+If you are server administrator you can try snmpd or mrtgutils.